| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
| |
Fix libusb20_dev_get_desc(3) to use the "vendor product" order, not
"product vendor". This is consistent with how it's generally done.
The ordering is visible eg in usbconfig(8) output.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
r309294
This patch upgrades driver version to 06.712.04.00-fbsd
r309293
This patch will add code to refire IOCTL commands after OCR.
r309292
This patch will unblock SYNCHRONIZE_CACHE command to firmware,
i.e. don't block the SYNCHRONIZE_CACHE command at driver instead of passing it to firmware for all Gen3 controllers.
r309291
Wait for AEN task to be completed(if in queue) before resetting the controller
and return without processing event in AEN thread, if controller reset is in progress.
r309290
This patch will add task management support in driver. Below is high level description:
If a SCSI IO times out, then before initiating OCR, now the driver will try to send a
target reset to the particular target for which the IO is timed out. If that also fails,
then the driver will initiate OCR.
r309289
Process outstanding reply descriptors from all the reply descriptor post queues before initiating OCR.
r309288
Clean up reference to AEN command if abort AEN is succesful as the command is aborted.
Did the same by setting sc->aen_cmd = NULL when aborting AEN is successful.
r309287
Update controller properties(read OCR capability bit) when MR_EVT_CTRL_PROP_CHANGED recieved.
r309286
Add sanity check in IO and IOCTL path not to process command further if controller is in
HW_CRITICAL_ERROR.
r309285
Use a variable to indicate Gen3 controllers and remove all PCI ids based
checks used for gen3 controllers.
r309284
High level description of new solution -
Free MFI and MPT command from same context.
Free both the command either from process (from where mfi-mpt pass-through was called) or from
ISR context. Do not split freeing of MFI and MPT, because it creates the race condition which
will do MFI/MPT list.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix for endless recursion in the ACPI GPE handler during boot.
When handling a GPE ACPI interrupt object the EcSpaceHandler()
function can be called which checks the EC_EVENT_SCI bit and then
recurse on the EcGpeQueryHandler() function. If there are multiple GPE
events pending the EC_EVENT_SCI bit will be set at the next call to
EcSpaceHandler() causing it to recurse again via the
EcGpeQueryHandler() function. This leads to a slow never ending
recursion during boot which prevents proper system startup, because
the EC_EVENT_SCI bit never gets cleared in this scenario.
The behaviour is reproducible with the ALASKA AMI in combination with
a newer Skylake based mainboard in the following way:
Enter BIOS and adjust the clock one hour forward. Save and exit the
BIOS. System fails to boot due to the above mentioned bug in
EcGpeQueryHandler() which was observed recursing multiple times.
This patch adds a simple recursion guard to the EcGpeQueryHandler()
function and also also adds logic to detect if new GPE events occurred
during the execution of EcGpeQueryHandler() and then loop on this
function instead of recursing.
Reviewed by: jhb
|
|
|
|
|
|
|
|
|
|
|
| |
Fix return value from ng_uncallout().
callout_stop() recently started returning -1 when the callout is already
stopped, which is not handled by the netgraph code. Properly filter
the return value. Netgraph callers only want to know if the callout
was cancelled and not draining or already stopped.
Discussed with: julian, glebius
|
|
|
|
|
|
|
|
|
|
| |
Remove useless NULL checks.
NULL is not returned when allocating memory passing the M_WAITOK flag.
Submitted by: trasz @
Differential Revision: https://reviews.freebsd.org/D5772
Sponsored by: Mellanox Technologies
|
|
|
|
| |
Fix typo.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Check that blkfront devices have a non-zero number of sectors and a
non-zero sector size. Such a device would be a virtual disk of zero
bytes; clearly not useful, and not something we should try to attach.
As a fortuitous side effect, checking that these values are non-zero
here results in them not *becoming* zero later on the function. This
odd behaviour began with r309124 (clang 3.9.0) but is challenging to
debug; making any changes to this function whatsoever seems to affect
the llvm optimizer behaviour enough to make the unexpected zeroing of
the sector_size variable cease.
PR: 215209
Security: The potential for variables to unexpectedly become zero
has worrying consequences for security in general, but
not so much in this particular context.
MFC r310086:
In xbd_connect(), use correct scanf conversion specifiers for the
feature_barrier and feature_flush variables. Otherwise, adjacent
variables on the stack, such as sector_size, may be overwritten, with
disastrous results.
Note that I did not see a good reason to revert the addition of zero
checks introduced in r310013. Better safe than sorry.
PR: 215209
Tested by: royger
|
|
|
|
|
|
| |
Provide high precision conversion from ns,us,ms -> sbintime in kevent.
Tested by: ian
|
|
|
|
|
|
|
|
|
|
| |
Speed up pw operations that edit /etc/group or /etc/passwd
r285050 fixed a bug in pw that could lead to /etc/passwd or /etc/group
corruption on power loss. However, it fixed it by opening those files with
O_SYNC, which is very slow, especially on ZFS. This change replaces O_SYNC
with appropriately placed fsync()s instead, which is much faster. Using a
ZFS tmpdir, the time to run pw's kyua tests drops from 245s to 35s.
|
|
|
|
| |
Use the correct name for the GCC macro indicating max_align_t is defined.
|
|
|
|
|
|
| |
Add an implementation for pmaps_sync_icache() on MIPS that sync's the
instruction cache on all CPUs via smp_rendezvous() after a debugger
inserts a breakpoint via ptrace(PT_IO).
|
|
|
|
|
|
| |
MFC r309602:
Remove svn[lite]{bench,fsfs} if either MK_SVN == no or MK_SVNLITE == no
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Export the whole thread name in kinfo_proc
kinfo_proc::ki_tdname is three characters shorter than
thread::td_name. Add a ki_moretdname field for these three
extra characters. Add the new field to kinfo_proc32, as well.
Update all in-tree consumers to read the new field and assemble
the full name, except for lldb's HostThreadFreeBSD.cpp, which
I will handle separately. Bump __FreeBSD_version.
Sponsored by: Dell EMC
|
|
|
|
| |
Move map_generation snapshot value into struct faultstate.
|
|
|
|
| |
Style.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Original commit "7090 zfs should improve allocation order" declares alloc
queue sorted by time and offset. But in practice io_offset is always zero,
so sorting happened only by time, while order of writes with equal time was
completely random. On Illumos this did not affected much thanks to using
high resolution timestamps. On FreeBSD due to using much faster but low
resolution timestamps it caused bad data placement on disks, affecting
further read performance.
This change switches zio_timestamp_compare() from comparing uninitialized
io_offset to really populated io_bookmark values. I haven't decided yet
what to do with timestampts, but on simple tests this change gives the
same peformance results by just making code to work as declared.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
thr_set_name(): silently truncate the given name as needed
Instead of failing with ENAMETOOLONG, which is swallowed by
pthread_set_name_np() anyway, truncate the given name to MAXCOMLEN+1
bytes. This is more likely what the user wants, and saves the
caller from truncating it before the call (which was the only
recourse).
The man page changes were not merged because thr_set_name.2
does not exist on stable/10.
Sponsored by: Dell EMC
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
subrulenr is considered unset if it's set to -1, not if it's set to 1.
See contrib/tcpdump/print-pflog.c pflog_print() for a user.
This caused incorrect pflog output (tcpdump -n -e -ttt -i pflog0):
rule 0..16777216(match)
instead of the correct output of
rule 0/0(match)
PR: 214832
Submitted by: andywhite@gmail.com
|
|
|
|
|
|
| |
Fix libllvmanalysis build failure after r309857: on stable/9, llvm is
compiled by gcc, and without -std=c++11, so the nullptr keyword is
unknown. Use the old-school plain zero syntax instead.
|
|
|
|
| |
systems with more than 4GB of physical memory.
|
| |
|
| |
|
| |
|
| |
|
|
|
|
| |
in both read and write.
|
|
|
|
| |
the filesystem
|
|
|
|
| |
DIAGNOSTIC is enabled
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a direct commit to this branch.
smbus_get_addr() was declared as a funciton prototype, but the function
was never defined. read_ivar and write_ivar methods were unused.
This was exposed after jedec_ts driver was imported to this branch
as that driver turned out to be the first user of smbus_get_addr().
This change is a small subset of a larger change in r281985.
Reported by: jhb
Pointyhat to: avg
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This is imported from NetBSD. The author--Joerg Sonnenberger--agreed
to apply a two-clause BSD license, just so the license was clear.
This source tree location matches NetBSD, and is the first place someone
might look for such a tool.
Obtained from: Joerg Sonnenberger via NetBSD
Sponsored by: Dell EMC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
locale: fix buffer management
Also, handle signed and unsigned chars, and more gracefully handle
invalid input.
locale: enable more warnings; fix them
Do not set WARNS, so it gets the current default of 6.
Fix the warnings by sprinkling static, const, or strdup.
Make some constant data tables const. Fix whitespace.
Sponsored by: Dell EMC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
------------------------------------------------------------------------
r307684 | ken | 2016-10-20 13:42:26 -0600 (Thu, 20 Oct 2016) | 13 lines
For CCBs allocated on the stack, we need to clear the entire CCB, not just
the header. Otherwise stack garbage can lead to random flags getting set.
This showed up as 'camcontrol rescan all' failing with EINVAL because the
address type wasn't CAM_DATA_VADDR.
sbin/camcontrol/camcontrol.c:
In rescan_or_reset_bus(), bzero the stack-allocated CCBs before
use instead of clearing the body.
Sponsored by: Spectra Logic
------------------------------------------------------------------------
r307747 | ken | 2016-10-21 12:54:56 -0600 (Fri, 21 Oct 2016) | 27 lines
Fix a problem in camcontrol(8) that cropped up with r307684.
In r307684, I changed rescan_or_reset_bus() to bzero stack-allocated CCBs
before sending them to the kernel because there was stack garbage in there
that wound up meaning that bogus CCB flags were set.
While this fixed the 'camcontrol rescan all' case (XPT_DEV_MATCH CCBs were
failing previously), it broke the 'camcontrol rescan 0' (or any other
number) case when INVARIANTS are turned on. Rescanning a single bus
reliably produced an assert in cam_periph_runccb():
panic: cam_periph_runccb: ccb=0xfffff80044ffe000, func_code=0x708, flags=0xffffdde0
The flags values don't make sense from the code. Changing the CCBs in
rescan_or_reset_bus() from stack to heap allocated avoids the problem.
It would be better to understand why userland stack allocated CCBs don't
work properly, since there may be other code that breaks if stack allocated
CCBs don't work.
sbin/camcontrol/camcontrol.c:
In rescan_or_reset_bus(), allocate the CCBs using malloc(3) instead
of on the stack to avoid an assertion in cam_periph_runccb().
Sponsored by: Spectra Logic
------------------------------------------------------------------------
Sponsored by: Spectra Logic
|
| |
|
|
|
|
|
|
|
| |
Fix comment typo.
PR: 208484
Submitted by: madpilot
|
|
|
|
|
|
|
| |
Fix pw groupshow <gid>
PR: 204676
Submitted by: longwitz@incore.de
|
|
|
|
|
|
|
|
| |
Perl is not available in base fix scripts depending on it to use
the version from ports
PR: 215159
Reported by: Anatoly Kamchatnov <akamch@gmail.com>
|
|
|
|
| |
Update pci ids database to 2016.11.21
|
|
|
|
| |
Fix WITNESS hints for pagequeue locks.
|
|
|
|
| |
Plug memory leaks.
|
|
|
|
|
| |
r309238: Plug a potential memory leak.
r309239: style(9).
|
|
|
|
|
|
|
|
| |
r309232: Fix an obvious typo.
r309233: Eliminate variables that are computed, assigned but
never used.
r309234: pages and psize are always assigned, so there is no
need to initialize them as zero.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pull in r281586 from upstream llvm trunk (by Wei Mi):
Add some shortcuts in LazyValueInfo to reduce compile time of
Correlated Value Propagation.
The patch is to partially fix PR10584. Correlated Value Propagation
queries LVI to check non-null for pointer params of each callsite. If
we know the def of param is an alloca instruction, we know it is
non-null and can return early from LVI. Similarly, CVP queries LVI to
check whether pointer for each mem access is constant. If the def of
the pointer is an alloca instruction, we know it is not a constant
pointer. These shortcuts can reduce the cost of CVP significantly.
Differential Revision: https://reviews.llvm.org/D18066
This significantly reduces memory usage and compilation time when
compiling a particular C++ source file of the graphics/colmap port.
PR: 215136
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
For whatever reason, smapi, smbios, vpd are all under the "bios" directory.
smapi is only for i386, so the entire "bios" directory is only built for
i386. Break smapi out, and make only it i386-specific. Then, build the
"bios" directory for both amd64 and i386.
Because 'sys/modules/Makefile' was refactored after stable/10 was branched,
the diff for that file is different from that of the original commit. They
are functionally equivalent.
|
|
|
|
|
| |
PR: 213665
Submitted by: Pawel Worach <pawel.worach@gmail.com>
|
| |
|
|
|
|
| |
Import tzdata 2016j
|
|
|
|
| |
style(9) indent changes, no actual code change.
|
|
|
|
|
|
|
| |
These symbols already appear in the common lib/msun/Symbol.map.
Duplicate entries produce an error with LLVM's LLD linker.
Sponsored by: The FreeBSD Foundation
|