diff options
Diffstat (limited to 'usr.sbin')
-rw-r--r-- | usr.sbin/sesutil/Makefile | 4 | ||||
-rw-r--r-- | usr.sbin/sesutil/eltsub.c | 235 | ||||
-rw-r--r-- | usr.sbin/sesutil/eltsub.h | 37 | ||||
-rw-r--r-- | usr.sbin/sesutil/sesutil.8 | 79 | ||||
-rw-r--r-- | usr.sbin/sesutil/sesutil.c | 444 |
5 files changed, 734 insertions, 65 deletions
diff --git a/usr.sbin/sesutil/Makefile b/usr.sbin/sesutil/Makefile index 39ca86b..e7e7089 100644 --- a/usr.sbin/sesutil/Makefile +++ b/usr.sbin/sesutil/Makefile @@ -1,6 +1,10 @@ # $FreeBSD$ PROG= sesutil +SRCS= sesutil.c eltsub.c MAN= sesutil.8 +DPADD= ${LIBSBUF} +LDADD= -lsbuf + .include <bsd.prog.mk> diff --git a/usr.sbin/sesutil/eltsub.c b/usr.sbin/sesutil/eltsub.c new file mode 100644 index 0000000..287530d --- /dev/null +++ b/usr.sbin/sesutil/eltsub.c @@ -0,0 +1,235 @@ +/* $FreeBSD$ */ +/* + * Copyright (c) 2000 by Matthew Jacob + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification, immediately at the beginning of the file. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * the GNU Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Matthew Jacob + * Feral Software + * mjacob@feral.com + */ + +#include <sys/endian.h> +#include <sys/types.h> +#include <sys/sbuf.h> + +#include <err.h> +#include <unistd.h> +#include <stddef.h> +#include <stdint.h> +#include <stdlib.h> +#include <stdio.h> +#include <sys/ioctl.h> +#include <cam/scsi/scsi_all.h> +#include <cam/scsi/scsi_enc.h> + +#include "eltsub.h" + +/* + * offset by +20 degrees. + * The range of the value expresses a temperature between -19 and +235 degrees + * Celsius. A value of 00h is reserved. + */ +#define TEMPERATURE_OFFSET 20 + +char * +geteltnm(int type) +{ + static char rbuf[132]; + + switch (type) { + case ELMTYP_UNSPECIFIED: + sprintf(rbuf, "Unspecified"); + break; + case ELMTYP_DEVICE: + sprintf(rbuf, "Device Slot"); + break; + case ELMTYP_POWER: + sprintf(rbuf, "Power Supply"); + break; + case ELMTYP_FAN: + sprintf(rbuf, "Cooling"); + break; + case ELMTYP_THERM: + sprintf(rbuf, "Temperature Sensors"); + break; + case ELMTYP_DOORLOCK: + sprintf(rbuf, "Door Lock"); + break; + case ELMTYP_ALARM: + sprintf(rbuf, "Audible alarm"); + break; + case ELMTYP_ESCC: + sprintf(rbuf, "Enclosure Services Controller Electronics"); + break; + case ELMTYP_SCC: + sprintf(rbuf, "SCC Controller Electronics"); + break; + case ELMTYP_NVRAM: + sprintf(rbuf, "Nonvolatile Cache"); + break; + case ELMTYP_INV_OP_REASON: + sprintf(rbuf, "Invalid Operation Reason"); + break; + case ELMTYP_UPS: + sprintf(rbuf, "Uninterruptible Power Supply"); + break; + case ELMTYP_DISPLAY: + sprintf(rbuf, "Display"); + break; + case ELMTYP_KEYPAD: + sprintf(rbuf, "Key Pad Entry"); + break; + case ELMTYP_ENCLOSURE: + sprintf(rbuf, "Enclosure"); + break; + case ELMTYP_SCSIXVR: + sprintf(rbuf, "SCSI Port/Transceiver"); + break; + case ELMTYP_LANGUAGE: + sprintf(rbuf, "Language"); + break; + case ELMTYP_COMPORT: + sprintf(rbuf, "Communication Port"); + break; + case ELMTYP_VOM: + sprintf(rbuf, "Voltage Sensor"); + break; + case ELMTYP_AMMETER: + sprintf(rbuf, "Current Sensor"); + break; + case ELMTYP_SCSI_TGT: + sprintf(rbuf, "SCSI Target Port"); + break; + case ELMTYP_SCSI_INI: + sprintf(rbuf, "SCSI Initiator Port"); + break; + case ELMTYP_SUBENC: + sprintf(rbuf, "Simple Subenclosure"); + break; + case ELMTYP_ARRAY_DEV: + sprintf(rbuf, "Array Device Slot"); + break; + case ELMTYP_SAS_EXP: + sprintf(rbuf, "SAS Expander"); + break; + case ELMTYP_SAS_CONN: + sprintf(rbuf, "SAS Connector"); + break; + default: + (void) sprintf(rbuf, "<Type 0x%x>", type); + break; + } + return (rbuf); +} + +char * +scode2ascii(u_char code) +{ + static char rbuf[32]; + switch (code & 0xf) { + case SES_OBJSTAT_UNSUPPORTED: + sprintf(rbuf, "Unsupported"); + break; + case SES_OBJSTAT_OK: + sprintf(rbuf, "OK"); + break; + case SES_OBJSTAT_CRIT: + sprintf(rbuf, "Critical"); + break; + case SES_OBJSTAT_NONCRIT: + sprintf(rbuf, "Noncritical"); + break; + case SES_OBJSTAT_UNRECOV: + sprintf(rbuf, "Unrecoverable"); + break; + case SES_OBJSTAT_NOTINSTALLED: + sprintf(rbuf, "Not Installed"); + break; + case SES_OBJSTAT_UNKNOWN: + sprintf(rbuf, "Unknown"); + break; + case SES_OBJSTAT_NOTAVAIL: + sprintf(rbuf, "Not Available"); + break; + case SES_OBJSTAT_NOACCESS: + sprintf(rbuf, "No Access Allowed"); + break; + default: + sprintf(rbuf, "<Status 0x%x>", code & 0xf); + break; + } + return (rbuf); +} + +struct sbuf * +stat2sbuf(int eletype, u_char *cstat) +{ + struct sbuf *buf; + + buf = sbuf_new_auto(); + if (buf == NULL) + err(EXIT_FAILURE, "sbuf_new_auto()"); + + if (cstat[0] & 0x40) + sbuf_printf(buf, "\t\t- Predicted Failure\n"); + if (cstat[0] & 0x20) + sbuf_printf(buf, "\t\t- Disabled\n"); + if (cstat[0] & 0x10) + sbuf_printf(buf, "\t\t- Swapped\n"); + switch (eletype) { + case ELMTYP_DEVICE: + if (cstat[2] & 0x02) + sbuf_printf(buf, "\t\t- LED=locate\n"); + if (cstat[2] & 0x20) + sbuf_printf(buf, "\t\t- LED=fault\n"); + break; + case ELMTYP_ARRAY_DEV: + if (cstat[2] & 0x02) + sbuf_printf(buf, "\t\t- LED=locate\n"); + if (cstat[2] & 0x20) + sbuf_printf(buf, "\t\t- LED=fault\n"); + break; + case ELMTYP_FAN: + sbuf_printf(buf, "\t\t- Speed: %d rpm\n", + (((0x7 & cstat[1]) << 8) + cstat[2]) * 10); + break; + case ELMTYP_THERM: + if (cstat[2]) { + sbuf_printf(buf, "\t\t- Temperature: %d C\n", + cstat[2] - TEMPERATURE_OFFSET); + } else { + sbuf_printf(buf, "\t\t- Temperature: -reserved-\n"); + } + break; + case ELMTYP_VOM: + sbuf_printf(buf, "\t\t- Voltage: %.2f V\n", + be16dec(cstat + 2) / 100.0); + break; + } + sbuf_finish(buf); + return (buf); +} diff --git a/usr.sbin/sesutil/eltsub.h b/usr.sbin/sesutil/eltsub.h new file mode 100644 index 0000000..299ada3 --- /dev/null +++ b/usr.sbin/sesutil/eltsub.h @@ -0,0 +1,37 @@ +/* $FreeBSD$ */ +/* + * Copyright (c) 2000 by Matthew Jacob + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification, immediately at the beginning of the file. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * the GNU Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Matthew Jacob + * Feral Software + * mjacob@feral.com + */ + +char *geteltnm(int); +char *scode2ascii(u_char); +struct sbuf *stat2sbuf(int, u_char *); diff --git a/usr.sbin/sesutil/sesutil.8 b/usr.sbin/sesutil/sesutil.8 index 8c64922..79d0f66 100644 --- a/usr.sbin/sesutil/sesutil.8 +++ b/usr.sbin/sesutil/sesutil.8 @@ -24,7 +24,7 @@ .\" .\" $FreeBSD$ .\" -.Dd September 1, 2015 +.Dd September 6, 2015 .Dt SESUTIL 8 .Os .Sh NAME @@ -32,34 +32,87 @@ .Nd Utility for managing SCSI Enclosure Services (SES) device .Sh SYNOPSIS .Nm -.Cm locate Ar disk Bq on|off +.Cm fault +.Op Fl u Ar /dev/sesN +.Aq Ar disk | Ar sesid | Li all +.Op on | off +.Nm +.Cm locate +.Op Fl u Ar /dev/sesN +.Aq Ar disk | Ar sesid | Li all +.Op on | off +.Nm +.Cm map +.Op Fl u Ar /dev/sesN +.Nm +.Cm status +.Op Fl u Ar /dev/sesN .Sh DESCRIPTION The .Nm -utility can be used to modify various parameter on SCSI Enclosure Services -(SES) device. +utility can be used to query and modify various parameter of SCSI Enclosure +Services (SES) devices. .Pp List of supported commands: .Bl -tag -width indent -.It Cm locate Ar disk Bq on|off -Change the state of the external LED associated with +.It Cm fault Oo Fl u Ar /dev/sesN Oc Ao Ar disk | Li all Ac Op on | off +Change the state of the external fault LED associated with +.Ar disk . +.Ar disk +can be the device name of the disk, like +.Cm da12 , +or +.Ql all . +to indicate all disks attached to SES controllers. +.It Cm fault Fl u Ar /dev/sesN Ar sesid Op on | off +Change the state of the external fault LED associated with an element +connected to the SES controller. +.Ar sesid +must be the element ID of a valid item attached to the controller. +Use the +.Cm map +command to list the elements attached to a controller. +.It Cm locate Oo Fl u Ar /dev/sesN Oc Ao Ar disk | Li all Ac Op on | off +Change the state of the external locate LED associated with .Ar disk . .Ar disk can be the device name of the disk, like .Cm da12 , or -.Cm all . +.Ql all . to indicate all disks attached to SES controllers. +.It Cm locate Fl u Ar /dev/sesN Ar sesid Op on | off +Change the state of the external locate LED associated with an element +connected to the SES controller. +.Ar sesid +must be the element ID of a valid item attached to the controller. +Use the +.Cm map +command to list the elements attached to a controller. +.It Cm map Op Fl u Ar /dev/sesN +Display a map of all elements connected to the specified +.Xr ses 4 +controller. +If no controller is specified, all controllers are mapped. +.It Cm status Op Fl u Ar /dev/sesN +Display the status of the specified +.Xr ses 4 +controller. +If no controller is specified, the status of each controller is returned. .El .Sh EXAMPLES -Turn off all external LEDs: +Turn off all locate LEDs: .Pp .Dl Nm Cm locate all off .Pp -Turn on the external LED of drive +Turn on the locate LED for the drive bay corresponding to .Pa da15 : .Pp .Dl Nm Cm locate da15 on +.Pp +Turn on the fault LED for a drive bay not associated with a device: +.Pp +.Dl Nm Cm fault -u /dev/ses2 7 on .Sh SEE ALSO .Xr ses 4 .Sh HISTORY @@ -68,6 +121,10 @@ The utility first appeared in .Fx 11.0 . .Sh AUTHORS +.An -nosplit The -.Nm utility was written by -.An Baptiste Daroussin Aq Mt bapt@FreeBSD.org . +.Nm +utility was written by +.An Baptiste Daroussin Aq Mt bapt@FreeBSD.org +and +.An Allan Jude Aq Mt allanjude@FreeBSD.org . diff --git a/usr.sbin/sesutil/sesutil.c b/usr.sbin/sesutil/sesutil.c index 1b38143..0f04c07 100644 --- a/usr.sbin/sesutil/sesutil.c +++ b/usr.sbin/sesutil/sesutil.c @@ -1,5 +1,7 @@ /*- * Copyright (c) 2015 Baptiste Daroussin <bapt@FreeBSD.org> + * Copyright (c) 2015 Allan Jude <allanjude@FreeBSD.org> + * Copyright (c) 2000 by Matthew Jacob * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -29,10 +31,13 @@ __FBSDID("$FreeBSD$"); #include <sys/param.h> #include <sys/ioctl.h> +#include <sys/types.h> +#include <sys/sbuf.h> #include <err.h> #include <errno.h> #include <fcntl.h> +#include <getopt.h> #include <glob.h> #include <stdbool.h> #include <stddef.h> @@ -45,21 +50,66 @@ __FBSDID("$FreeBSD$"); #include <cam/scsi/scsi_all.h> #include <cam/scsi/scsi_enc.h> +#include "eltsub.h" + +static int encstatus(int argc, char **argv); +static int fault(int argc, char **argv); static int locate(int argc, char **argv); +static int objmap(int argc, char **argv); +static int sesled(int argc, char **argv, bool fault); static struct command { const char *name; + const char *param; const char *desc; int (*exec)(int argc, char **argv); } cmds[] = { - { "locate", "Change the state of the external LED associated with a" - " disk", locate} , + { "fault", + "(<disk>|<sesid>|all) (on|off)", + "Change the state of the fault LED associated with a disk", + fault }, + { "locate", + "(<disk>|<sesid>|all) (on|off)", + "Change the state of the locate LED associated with a disk", + locate }, + { "map", "", + "Print a map of the devices managed by the enclosure", objmap } , + { "status", "", "Print the status of the enclosure", + encstatus }, }; static const int nbcmds = nitems(cmds); +static const char *uflag; static void -do_locate(int fd, unsigned int idx, bool onoff) +usage(FILE *out, const char *subcmd) +{ + int i; + + if (subcmd == NULL) { + fprintf(out, "Usage: %s [-u /dev/ses<N>] <command> [options]\n", + getprogname()); + fprintf(out, "Commands supported:\n"); + } + for (i = 0; i < nbcmds; i++) { + if (subcmd != NULL) { + if (strcmp(subcmd, cmds[i].name) == 0) { + fprintf(out, "Usage: %s %s [-u /dev/ses<N>] " + "%s\n\t%s\n", getprogname(), subcmd, + cmds[i].param, cmds[i].desc); + break; + } + continue; + } + fprintf(out, " %-12s%s\n\t\t%s\n\n", cmds[i].name, + cmds[i].param, cmds[i].desc); + } + + exit(EXIT_FAILURE); +} + +static void +do_led(int fd, unsigned int idx, bool onoff, bool setfault) { encioc_elm_status_t o; @@ -69,10 +119,11 @@ do_locate(int fd, unsigned int idx, bool onoff) err(EXIT_FAILURE, "ENCIOC_GETELMSTAT"); } o.cstat[0] |= 0x80; - if (onoff) - o.cstat[2] |= 0x02; - else - o.cstat[2] &= 0xfd; + if (onoff) { + o.cstat[2] |= (setfault ? 0x20 : 0x02); + } else { + o.cstat[2] &= (setfault ? 0xdf : 0xfd); + } if (ioctl(fd, ENCIOC_SETELMSTAT, (caddr_t) &o) < 0) { close(fd); @@ -87,39 +138,54 @@ disk_match(const char *devnames, const char *disk, size_t len) dname = devnames; while ((dname = strstr(dname, disk)) != NULL) { - if (dname[len] == '\0' || dname[len] == ',') + if (dname[len] == '\0' || dname[len] == ',') { return (true); + } dname++; } + return (false); } static int -locate(int argc, char **argv) +sesled(int argc, char **argv, bool setfault) { encioc_elm_devnames_t objdn; encioc_element_t *objp; glob_t g; - char *disk; - size_t len, i; - int fd, nobj, j; - bool all = false; - bool onoff; - - if (argc != 2) { - errx(EXIT_FAILURE, "usage: %s locate [disk] [on|off]", - getprogname()); + char *disk, *endptr; + size_t len, i, ndisks; + int fd; + unsigned int nobj, j, sesid; + bool all, isses, onoff; + + isses = false; + all = false; + onoff = false; + + if (argc != 3) { + usage(stderr, (setfault ? "fault" : "locate")); } - disk = argv[0]; + disk = argv[1]; - if (strcmp(argv[1], "on") == 0) { + sesid = strtoul(disk, &endptr, 10); + if (*endptr == '\0') { + endptr = strrchr(uflag, '*'); + if (endptr != NULL && *endptr == '*') { + warnx("Must specifying a SES device (-u) to use a SES " + "id# to identify a disk"); + usage(stderr, (setfault ? "fault" : "locate")); + } + isses = true; + } + + if (strcmp(argv[2], "on") == 0) { onoff = true; - } else if (strcmp(argv[1], "off") == 0) { + } else if (strcmp(argv[2], "off") == 0) { onoff = false; } else { - errx(EXIT_FAILURE, "usage: %s locate [disk] [on|off]", - getprogname()); + usage(stderr, (setfault ? "fault" : "locate")); } if (strcmp(disk, "all") == 0) { @@ -128,97 +194,367 @@ locate(int argc, char **argv) len = strlen(disk); /* Get the list of ses devices */ - if (glob("/dev/ses[0-9]*", 0, NULL, &g) == GLOB_NOMATCH) { + if (glob((uflag != NULL ? uflag : "/dev/ses[0-9]*"), 0, NULL, &g) == + GLOB_NOMATCH) { globfree(&g); errx(EXIT_FAILURE, "No SES devices found"); } + + ndisks = 0; for (i = 0; i < g.gl_pathc; i++) { /* ensure we only got numbers after ses */ if (strspn(g.gl_pathv[i] + 8, "0123456789") != - strlen(g.gl_pathv[i] + 8)) + strlen(g.gl_pathv[i] + 8)) { continue; + } if ((fd = open(g.gl_pathv[i], O_RDWR)) < 0) { - if (errno == EACCES) - err(EXIT_FAILURE, "enable to access SES device"); - break; + /* + * Don't treat non-access errors as critical if we are + * accessing all devices + */ + if (errno == EACCES && g.gl_pathc > 1) { + err(EXIT_FAILURE, "unable to access SES device"); + } + warn("unable to access SES device: %s", g.gl_pathv[i]); + continue; } - if (ioctl(fd, ENCIOC_GETNELM, (caddr_t) &nobj) < 0) + if (ioctl(fd, ENCIOC_GETNELM, (caddr_t) &nobj) < 0) { + close(fd); err(EXIT_FAILURE, "ENCIOC_GETNELM"); + } objp = calloc(nobj, sizeof(encioc_element_t)); - if (objp == NULL) + if (objp == NULL) { + close(fd); err(EXIT_FAILURE, "calloc()"); + } - if (ioctl(fd, ENCIOC_GETELMMAP, (caddr_t) objp) < 0) + if (ioctl(fd, ENCIOC_GETELMMAP, (caddr_t) objp) < 0) { + close(fd); err(EXIT_FAILURE, "ENCIOC_GETELMMAP"); + } + if (isses) { + if (sesid > nobj) { + close(fd); + errx(EXIT_FAILURE, + "Requested SES ID does not exist"); + } + do_led(fd, sesid, onoff, setfault); + ndisks++; + close(fd); + break; + } for (j = 0; j < nobj; j++) { memset(&objdn, 0, sizeof(objdn)); objdn.elm_idx = objp[j].elm_idx; objdn.elm_names_size = 128; objdn.elm_devnames = calloc(128, sizeof(char)); - if (objdn.elm_devnames == NULL) + if (objdn.elm_devnames == NULL) { + close(fd); err(EXIT_FAILURE, "calloc()"); + } if (ioctl(fd, ENCIOC_GETELMDEVNAMES, - (caddr_t) &objdn) <0) + (caddr_t) &objdn) <0) { continue; + } if (objdn.elm_names_len > 0) { if (all) { - do_locate(fd, objdn.elm_idx, onoff); + do_led(fd, objdn.elm_idx, + onoff, setfault); continue; } if (disk_match(objdn.elm_devnames, disk, len)) { - do_locate(fd, objdn.elm_idx, onoff); + do_led(fd, objdn.elm_idx, + onoff, setfault); + ndisks++; break; } } - } + } close(fd); } globfree(&g); + if (ndisks == 0 && all == false) { + errx(EXIT_FAILURE, "Count not find the SES id of device '%s'", + disk); + } return (EXIT_SUCCESS); } -static void -usage(FILE *out) +static int +locate(int argc, char **argv) { - int i; - fprintf(out, "Usage: %s [command] [options]\n", getprogname()); - fprintf(out, "Commands supported:\n"); - for (i = 0; i < nbcmds; i++) - fprintf(out, "\t%-15s%s\n", cmds[i].name, cmds[i].desc); + return (sesled(argc, argv, false)); +} + +static int +fault(int argc, char **argv) +{ + + return (sesled(argc, argv, true)); +} + +static int +objmap(int argc, char **argv __unused) +{ + struct sbuf *extra; + encioc_string_t stri; + encioc_elm_devnames_t e_devname; + encioc_elm_status_t e_status; + encioc_elm_desc_t e_desc; + encioc_element_t *e_ptr; + glob_t g; + int fd; + unsigned int j, nobj; + size_t i; + char str[32]; + + if (argc != 1) { + usage(stderr, "map"); + } + + /* Get the list of ses devices */ + if (glob(uflag, 0, NULL, &g) == GLOB_NOMATCH) { + globfree(&g); + errx(EXIT_FAILURE, "No SES devices found"); + } + for (i = 0; i < g.gl_pathc; i++) { + /* ensure we only got numbers after ses */ + if (strspn(g.gl_pathv[i] + 8, "0123456789") != + strlen(g.gl_pathv[i] + 8)) { + continue; + } + if ((fd = open(g.gl_pathv[i], O_RDWR)) < 0) { + /* + * Don't treat non-access errors as critical if we are + * accessing all devices + */ + if (errno == EACCES && g.gl_pathc > 1) { + err(EXIT_FAILURE, "unable to access SES device"); + } + warn("unable to access SES device: %s", g.gl_pathv[i]); + continue; + } + + if (ioctl(fd, ENCIOC_GETNELM, (caddr_t) &nobj) < 0) { + close(fd); + err(EXIT_FAILURE, "ENCIOC_GETNELM"); + } + + e_ptr = calloc(nobj, sizeof(encioc_element_t)); + if (e_ptr == NULL) { + close(fd); + err(EXIT_FAILURE, "calloc()"); + } + + if (ioctl(fd, ENCIOC_GETELMMAP, (caddr_t) e_ptr) < 0) { + close(fd); + err(EXIT_FAILURE, "ENCIOC_GETELMMAP"); + } + + printf("%s:\n", g.gl_pathv[i] + 5); + stri.bufsiz = sizeof(str); + stri.buf = &str[0]; + if (ioctl(fd, ENCIOC_GETENCNAME, (caddr_t) &stri) == 0) + printf("\tEnclosure Name: %s\n", stri.buf); + stri.bufsiz = sizeof(str); + stri.buf = &str[0]; + if (ioctl(fd, ENCIOC_GETENCID, (caddr_t) &stri) == 0) + printf("\tEnclosure ID: %s\n", stri.buf); + + for (j = 0; j < nobj; j++) { + /* Get the status of the element */ + memset(&e_status, 0, sizeof(e_status)); + e_status.elm_idx = e_ptr[j].elm_idx; + if (ioctl(fd, ENCIOC_GETELMSTAT, + (caddr_t) &e_status) < 0) { + close(fd); + err(EXIT_FAILURE, "ENCIOC_GETELMSTAT"); + } + /* Get the description of the element */ + memset(&e_desc, 0, sizeof(e_desc)); + e_desc.elm_idx = e_ptr[j].elm_idx; + e_desc.elm_desc_len = UINT16_MAX; + e_desc.elm_desc_str = calloc(UINT16_MAX, sizeof(char)); + if (e_desc.elm_desc_str == NULL) { + close(fd); + err(EXIT_FAILURE, "calloc()"); + } + if (ioctl(fd, ENCIOC_GETELMDESC, + (caddr_t) &e_desc) < 0) { + close(fd); + err(EXIT_FAILURE, "ENCIOC_GETELMDESC"); + } + /* Get the device name(s) of the element */ + memset(&e_devname, 0, sizeof(e_devname)); + e_devname.elm_idx = e_ptr[j].elm_idx; + e_devname.elm_names_size = 128; + e_devname.elm_devnames = calloc(128, sizeof(char)); + if (e_devname.elm_devnames == NULL) { + close(fd); + err(EXIT_FAILURE, "calloc()"); + } + if (ioctl(fd, ENCIOC_GETELMDEVNAMES, + (caddr_t) &e_devname) <0) { + /* We don't care if this fails */ + e_devname.elm_devnames[0] = '\0'; + } + printf("\tElement %u, Type: %s\n", e_ptr[j].elm_idx, + geteltnm(e_ptr[j].elm_type)); + printf("\t\tStatus: %s (0x%02x 0x%02x 0x%02x 0x%02x)\n", + scode2ascii(e_status.cstat[0]), e_status.cstat[0], + e_status.cstat[1], e_status.cstat[2], + e_status.cstat[3]); + if (e_desc.elm_desc_len > 0) { + printf("\t\tDescription: %s\n", + e_desc.elm_desc_str); + } + if (e_devname.elm_names_len > 0) { + printf("\t\tDevice Names: %s\n", + e_devname.elm_devnames); + } + extra = stat2sbuf(e_ptr[j].elm_type, e_status.cstat); + if (sbuf_len(extra) > 0) { + printf("\t\tExtra status:\n%s", + sbuf_data(extra)); + } + sbuf_delete(extra); + free(e_devname.elm_devnames); + } + close(fd); + } + globfree(&g); + + return (EXIT_SUCCESS); +} + +static int +encstatus(int argc, char **argv __unused) +{ + glob_t g; + int fd, status; + size_t i, e; + u_char estat; + + status = 0; + if (argc != 1) { + usage(stderr, "status"); + } + + /* Get the list of ses devices */ + if (glob(uflag, 0, NULL, &g) == GLOB_NOMATCH) { + globfree(&g); + errx(EXIT_FAILURE, "No SES devices found"); + } + for (i = 0; i < g.gl_pathc; i++) { + /* ensure we only got numbers after ses */ + if (strspn(g.gl_pathv[i] + 8, "0123456789") != + strlen(g.gl_pathv[i] + 8)) { + continue; + } + if ((fd = open(g.gl_pathv[i], O_RDWR)) < 0) { + /* + * Don't treat non-access errors as critical if we are + * accessing all devices + */ + if (errno == EACCES && g.gl_pathc > 1) { + err(EXIT_FAILURE, "unable to access SES device"); + } + warn("unable to access SES device: %s", g.gl_pathv[i]); + continue; + } + + if (ioctl(fd, ENCIOC_GETENCSTAT, (caddr_t) &estat) < 0) { + close(fd); + err(EXIT_FAILURE, "ENCIOC_GETENCSTAT"); + } + + printf("%s: ", g.gl_pathv[i] + 5); + e = 0; + if (estat == 0) { + if (status == 0) { + status = 1; + } + printf("OK"); + } else { + if (estat & SES_ENCSTAT_INFO) { + printf("INFO"); + e++; + } + if (estat & SES_ENCSTAT_NONCRITICAL) { + if (e) + printf(","); + printf("NONCRITICAL"); + e++; + } + if (estat & SES_ENCSTAT_CRITICAL) { + if (e) + printf(","); + printf("CRITICAL"); + e++; + status = -1; + } + if (estat & SES_ENCSTAT_UNRECOV) { + if (e) + printf(","); + printf("UNRECOV"); + e++; + status = -1; + } + } + printf("\n"); + + close(fd); + } + globfree(&g); + + if (status == 1) { + return (EXIT_SUCCESS); + } else { + return (EXIT_FAILURE); + } } int main(int argc, char **argv) { - int i; + int i, ch; struct command *cmd = NULL; - if (argc < 2) { + uflag = "/dev/ses[0-9]*"; + while ((ch = getopt_long(argc, argv, "u:", NULL, NULL)) != -1) { + switch (ch) { + case 'u': + uflag = optarg; + break; + case '?': + default: + usage(stderr, NULL); + } + } + argc -= optind; + argv += optind; + + if (argc < 1) { warnx("Missing command"); - usage(stderr); - return (EXIT_FAILURE); + usage(stderr, NULL); } for (i = 0; i < nbcmds; i++) { - if (strcmp(argv[1], cmds[i].name) == 0) { + if (strcmp(argv[0], cmds[i].name) == 0) { cmd = &cmds[i]; break; } } if (cmd == NULL) { - warnx("unknown command %s", argv[1]); - usage(stderr); - return (EXIT_FAILURE); + warnx("unknown command %s", argv[0]); + usage(stderr, NULL); } - argc-=2; - argv+=2; - return (cmd->exec(argc, argv)); } |