diff options
Diffstat (limited to 'usr.sbin/xntpd/Config.local.dist')
-rw-r--r-- | usr.sbin/xntpd/Config.local.dist | 89 |
1 files changed, 44 insertions, 45 deletions
diff --git a/usr.sbin/xntpd/Config.local.dist b/usr.sbin/xntpd/Config.local.dist index 7e540a3..2f73866 100644 --- a/usr.sbin/xntpd/Config.local.dist +++ b/usr.sbin/xntpd/Config.local.dist @@ -114,17 +114,10 @@ DEFS_LOCAL= $(DEFS_OPT) #GREEN -DREFCLOCK #TEST -DPPSPPS -DKERNEL_PLL # by default when using the "make makeconfig" script and greenhorn # configuraiton. # -# Define -DTRAK for a 8810 GPS Receiver with Buffered RS-232-C Interface -# Module. The driver supports both the CLK and PPS modes. It should work -# in all systems with a serial port. -# -# Define -DPST for a PST/Traconex 1020 WWV/H receiver. The driver -# supports both the CLK and PPS modes. It should work in all systems -# with a serial port. -# -# Define -DWWVB for a Spectracom 8170 or Netclock/2 WWVB receiver. It -# should work in all systems with a serial port. The driver supports -# both the CLK and PPS modes if the requisite kernel support is installed. +# Define -DAS2201 for an Austron 2200A or 2201A GPS receiver. It should +# work in all systems with a serial port. The driver does not support the +# CLK mode, but does support the PPS mode. If the radio is connected to +# more than one machine, the PPS mode is required. # # Define -DCHU for a special CHU receiver using an ordinary shortwave # radio. This requires the chu_clk line discipline or chu_clk_STREAMS @@ -133,25 +126,6 @@ DEFS_LOCAL= $(DEFS_OPT) #GREEN -DREFCLOCK #TEST -DPPSPPS -DKERNEL_PLL # Construction details for a suitable modem can be found in the ./gadget # directory. The driver supports # neither the CLK nor PPS modes. # -# Define -DPARSE for a DCF77/GPS(GENERIC) receiver. For best performance -# this requires a special parsestreams STREAMS (SunOS 4.x) module in the -# ./parse directory. Define -DPARSEPPS for PPS support via the -# DCF77/GPS (GENERIC) receiver; also, define -DPPS in the DEFS above. -# Define: -DCLOCK_MEINBERG for Meinberg clocks -# -DCLOCK_SCHMID for Schmid receivers -# -DCLOCK_DCF7000 for ELV DCF7000 -# -DCLOCK_RAWDCF for simple receivers (100/200ms pulses on Rx) -# -DCLOCK_TRIMSV6 for Trimble SV6 GPS receiver -# -# Define -DMX4200PPS for a Magnavox 4200 GPS receiver. At present, this -# driver works only on SunOS4.1.x with CPU serial ports only. The PPS -# mode is required. -# -# Define -DAS2201 for an Austron 2200A or 2201A GPS receiver. It should -# work in all systems with a serial port. The driver does not support the -# CLK mode, but does support the PPS mode. If the radio is connected to -# more than one machine, the PPS mode is required. -# # Define -DGOES for a Kinemetrics/TrueTime 468-DC GOES receiver. This # driver is known to work with some other TrueTime products as well, # including the GPS-DC GPS receiver. It should work in all systems with @@ -161,37 +135,62 @@ DEFS_LOCAL= $(DEFS_OPT) #GREEN -DREFCLOCK #TEST -DPPSPPS -DKERNEL_PLL # Define -DGPSTM for a Kinemetrics/TrueTime GPS-TM/TMD receiver. It # should work in all systems with a serial port. # -# Define -DOMEGA for a Kinemetrics/TrueTime OM-DC OMEGA receiver. It -# should work in all systems with a serial port. The driver does not -# support the CLK mode, but does support the PPS mode. -# -# Define -DTPRO for a KSI/Odetics TPRO-S IRIG-B timecode reader. This -# requires the SunOS interface driver available from KSI. The driver -# supports neither the CLK nor PPS modes. +# Define -DIRIG for a IRIG-B timecode timecode using the audio codec of +# the Sun SPARCstations. This requires a modified BSD audio driver and +# exclusive access to the audio port. A memo describing how it works and +# how to install the driver is in the README.irig file in the ./doc +# directory. # # Define -DLEITCH for a Leitch CSD 5300 Master Clock System Driver for # the HP 5061B Cesium Clock. It should work in all systems with a serial # port. The driver does not support the CLK mode, but does support the # PPS mode. # +# Define -DMX4200PPS for a Magnavox 4200 GPS receiver. At present, this +# driver works only on SunOS4.1.x with CPU serial ports only. The PPS +# mode is required. +# # Define -DMSFEESPPS for an EES M201 MSF receiver. It currently only works # under SunOS 4.x with the PPSCD (ppsclock) STREAMS module, but the RCS # files on cl.cam.ac.uk still has support for CLK and CBREAK modes. # -# Define -DIRIG for a IRIG-B timecode timecode using the audio codec of -# the Sun SPARCstations. This requires a modified BSD audio driver and -# exclusive access to the audio port. A memo describing how it works and -# how to install the driver is in the README.irig file in the ./doc -# directory. +# Define -DOMEGA for a Kinemetrics/TrueTime OM-DC OMEGA receiver. It +# should work in all systems with a serial port. The driver does not +# support the CLK mode, but does support the PPS mode. +# +# Define -DPARSE for a DCF77/GPS(GENERIC) receiver. For best performance +# this requires a special parsestreams STREAMS (SunOS 4.x) module in the +# ./parse directory. Define -DPARSEPPS for PPS support via the +# DCF77/GPS (GENERIC) receiver; also, define -DPPS in the DEFS above. +# Define: -DCLOCK_MEINBERG for Meinberg clocks +# -DCLOCK_SCHMID for Schmid receivers +# -DCLOCK_DCF7000 for ELV DCF7000 +# -DCLOCK_RAWDCF for simple receivers (100/200ms pulses on Rx) +# -DCLOCK_TRIMSV6 for Trimble SV6 GPS receiver +# +# Define -DPST for a PST/Traconex 1020 WWV/H receiver. The driver +# supports both the CLK and PPS modes. It should work in all systems +# with a serial port. +# +# Define -DTPRO for a KSI/Odetics TPRO-S IRIG-B timecode reader. This +# requires the SunOS interface driver available from KSI. The driver +# supports neither the CLK nor PPS modes. +# +# Define -DTRAK for a 8810 GPS Receiver with Buffered RS-232-C Interface +# Module. The driver supports both the CLK and PPS modes. It should work +# in all systems with a serial port. +# +# Define -DWWVB for a Spectracom 8170 or Netclock/2 WWVB receiver. It +# should work in all systems with a serial port. The driver supports +# both the CLK and PPS modes if the requisite kernel support is installed. # # Note: The following defines result in compilation of all the above radio # clocks. This works on a Sun 4.1.x system which has tty_clk, chu_clk and # ppsclock STREAMS modules installed. If the trailing CLK and PPS suffixes # are removed and the IRIG, PARSE* and CLOCK* deleted, all of the rest compile -# under Ultrix 4.2a/3. If the MX4200 is removed, all the rest compile on a DEC -# OSF/1 Alpha. +# under Ultrix 4.2a/3 and DEC # OSF/1 Alpha. # -CLOCKDEFS= #GREEN -DLOCAL_CLOCK #TEST -DAS2201PPS -DCHU -DGOES -DIRIG -DMX4200PPS -DOMEGA -DPST -DPSTCLK -DTPRO -DWWVBCLK -DMSFEESPPS -DLEITCH -DPARSE -DPARSEPPS -DCLOCK_MEINBERG -DCLOCK_RAWDCF -DCLOCK_SCHMID -DCLOCK_DCF7000 -DCLOCK_TRIMSV6 +CLOCKDEFS= #GREEN -DLOCAL_CLOCK #TEST -DAS2201PPS -DCHU -DATUM -DGOES -DGPSTM -DIRIG -DLEITCH -DMSFEES -DMX4200PPS -DOMEGA -DPST -DTPRO -TRAK -DWWVB -DPARSE -DPARSEPPS -DCLOCK_MEINBERG -DCLOCK_RAWDCF -DCLOCK_SCHMID -DCLOCK_DCF7000 -DCLOCK_TRIMSV6 # # Directory into which binaries should be installed (default /usr/local) |