diff options
Diffstat (limited to 'usr.sbin/sendmail/src/READ_ME')
| -rw-r--r-- | usr.sbin/sendmail/src/READ_ME | 1465 |
1 files changed, 0 insertions, 1465 deletions
diff --git a/usr.sbin/sendmail/src/READ_ME b/usr.sbin/sendmail/src/READ_ME deleted file mode 100644 index 7eea267..0000000 --- a/usr.sbin/sendmail/src/READ_ME +++ /dev/null @@ -1,1465 +0,0 @@ -# Copyright (c) 1983, 1995-1997 Eric P. Allman -# Copyright (c) 1988 The Regents of the University of California. -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by the University of -# California, Berkeley and its contributors. -# 4. Neither the name of the University nor the names of its contributors -# may be used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# @(#)READ_ME 8.156 (Berkeley) 10/23/97 -# - -This directory contains the source files for sendmail. - -********************* -!! DO NOT USE MAKE !! to compile sendmail -- instead, use the -********************* "makesendmail" script located in the src -directory. It will find an appropriate Makefile, and create an -appropriate obj.* subdirectory so that multiplatform support -works easily. - -The Makefile is for the new (4.4BSD) Berkeley make and uses syntax -that is not recognized by older makes. It also has assumptions -about the 4.4 file system layout built in. See below for details -about other Makefiles. - -If you are porting to a new architecture for which there is no existing -Makefile, you might start with Makefile.dist. This works on the old -traditional make, but isn't customized for any particular architecture. - - ************************************************** - ** Read below for more details of Makefiles. ** - ************************************************** - -************************************************************************** -** IMPORTANT: DO NOT USE OPTIMIZATION (``-O'') IF YOU ARE RUNNING ** -** GCC 2.4.x or 2.5.x. THERE IS A BUG IN THE GCC OPTIMIZER THAT ** -** CAUSES SENDMAIL COMPILES TO FAIL MISERABLY. ** -************************************************************************** - -Jim Wilson of Cygnus believes he has found the problem -- it will -probably be fixed in GCC 2.5.6 -- but until this is verified, be -very suspicious of gcc -O. - -This problem is reported to have been fixed in gcc 2.6. - -************************************************************************** -** IMPORTANT: Read the appropriate paragraphs in the section on ** -** ``Operating System and Compile Quirks''. ** -************************************************************************** - -For detailed instructions, please read the document ../doc/op.me: - - eqn ../doc/op.me | pic | ditroff -me - - -+-----------+ -| MAKEFILES | -+-----------+ - -By far, the easiest way to compile sendmail is to use the "makesendmail" -script: - - sh makesendmail - -This uses the "uname" command to figure out what architecture you are -on and selects a proper Makefile accordingly. It also creates a -subdirectory per object format, so that multiarchitecture support is -easy. In general this should be all you need. However, if for some -reason this doesn't work (e.g., NeXT systems don't have the "uname" -command) you may have to set up your compile environment by hand. - -The "Makefile"s in these directories are from 4.4 BSD, and hence -really only work properly if you are on a 4.4 system. In particular, -they use new syntax that will not be recognized on old make programs, -and some of them do things like ``.include ../../Makefile.inc'' to -pick up some system defines. If you are getting sendmail separately, -these files won't be included in the distribution, as they are -outside of the sendmail tree. - -Instead, you should use one of the other Makefiles, such as -Makefile.SunOS for a SunOS system, and so forth. These should -work with the version of make that is appropriate for that -system. All other Makefiles are in the "src/Makefiles" subdirectory. -They use the version of make that is native for that system. These -are the Makefiles that I use, and they have "Berkeley quirks" in them. -I can't guarantee that they will work unmodified in your environment. -In particular, Many of them include -I/usr/sww/include/db and --L/usr/sww/lib -- these are Berkeley's locations in the ``Software -Warehouse'' for the new database libraries, described below. You don't -have to remove these definitions if you don't have these directories, -but you may have to remove -DNEWDB from the DBMDEF definition. - -Please look for an appropriate Makefile before you start trying to -compile with Makefile or Makefile.dist. - -If you want to port the new Berkeley make, you can get it from -ftp.uu.net in the directory /systems/unix/bsd-sources/usr.bin/make. -Diffs and instructions for building this version of make under -SunOS 4.1.x are available on ftp.css.itd.umich.edu in -/pub/systems/sun/Net2-make-sun4.diff.Z. Diffs and instructions -for building this version of make under IBM AIX 3.2.4 are available -on ftp.uni-stuttgart.de in /sw/src/patches/bsd-make-rus-patches. -For Ultrix, try ftp.vix.com:~ftp/pub/patches/pmake-for-ultrix.Z. -Paul Southworth <pauls@umich.edu> published a description of porting -this make in comp.unix.bsd. - -The complete text of the Makefile.inc that is in the parent of the -sendmail directory is: - - # @(#)Makefile.inc 8.1 (Berkeley) 6/6/93 - - BINDIR?= /usr/sbin - - -+----------------------+ -| DATABASE DEFINITIONS | -+----------------------+ - -There are several database formats that can be used for the alias files -and for general maps. When used for alias files they interact in an -attempt to be back compatible. - -The options are: - -NEWDB The new Berkeley DB package. Some systems (e.g., BSD/OS and - Digital UNIX 4.0) have this package pre-installed. If your - system does not have NEWDB installed, get version 1.85 - from http://www.sleepycat.com/packages/db.1.85.tar.gz. - DO NOT use Berkeley DB version 2.X with sendmail. DO NOT - use the version from the Net2 distribution. If you are - still running BSD/386 1.x, you will also need to define - OLD_NEWDB. -NDBM The older NDBM implementation -- the very old V7 DBM - implementation is no longer supported. -NIS Network Information Services. To use this you must have - NIS support on your system. -NISPLUS NIS+ (the revised NIS released with Solaris 2). You must - have NIS+ support on your system to use this flag. -HESIOD Support for Hesiod (from the DEC/Athena distribution). You - must already have Hesiod support on your system for this to - work. You may be able to get this to work with the MIT/Athena - version of Hesiod, but that's likely to be a lot of work. -LDAPMAP Lightweight Directory Lookup Protocol support. You will - have to install the UMich ldap and lber libraries to use - this flag. - ->>> NOTE WELL for NEWDB support: it is CRITICAL that you remove ndbm.o ->>> from libdb.a before you install it and DO NOT install ndbm.h if ->>> you want to get ndbm support. If you don't delete these, there is ->>> absolutely no point to including -DNDBM, since it will just get you ->>> another (inferior) API to the same format database. These files ->>> OVERRIDE calls to ndbm routines -- in particular, if you leave ndbm.h ->>> in, you can find yourself using the new db package even if you don't ->>> define NEWDB. ->>> ->>> Further note: DO NOT remove your existing /usr/include/ndbm.h -- ->>> you need that one. But do not install an updated ndbm.h in ->>> /usr/include, /usr/local/include, or anywhere else. - -If NEWDB and NDBM are defined (but not NIS), then sendmail will read -NDBM format alias files, but the next time a newaliases is run the -format will be converted to NEWDB; that format will be used forever -more. This is intended as a transition feature. - -If NEWDB, NDBM, and NIS are all defined and the name of the file includes -the string "/yp/", sendmail will rebuild BOTH the NEWDB and NDBM format -alias files. However, it will only read the NEWDB file; the NDBM format -file is used only by the NIS subsystem. This is needed because the NIS -maps on an NIS server are built directly from the NDBM files. - -If NDBM and NIS are defined (regardless of the definition of NEWDB), -and the filename includes the string "/yp/", sendmail adds the special -tokens "YP_LAST_MODIFIED" and "YP_MASTER_NAME", both of which are -required if the NDBM file is to be used as an NIS map. - -All of these flags are normally defined in the DBMDEF line in the -Makefile. - -If you define NEWDB or HESIOD you get the User Database (USERDB) -automatically. Generally you do want to have NEWDB for it to do -anything interesting. See above for getting the Berkeley "db" -package (i.e., NEWDB). There is no separate "user database" -package -- don't bother searching for it on the net. - -Hesiod and LDAP require libraries that may not be installed with your -system. These are outside of my ability to provide support. See the -"Quirks" section for more information. - - - -+---------------+ -| COMPILE FLAGS | -+---------------+ - -Whereever possible, I try to make sendmail pull in the correct -compilation options needed to compile on various environments based on -automatically defined symbols. Some machines don't seem to have useful -symbols available, requiring that a compilation flag be defined in -the Makefile; see the Makefiles subdirectory for the supported -architectures. - -If you are a system to which sendmail has already been ported you -should not have to touch the following symbols. But if you are porting, -you may have to tweak the following compilation flags in conf.h in order -to get it to compile and link properly: - -SYSTEM5 Adjust for System V (not necessarily Release 4). -SYS5SIGNALS Use System V signal semantics -- the signal handler - is automatically dropped when the signal is caught. - If this is not set, use POSIX/BSD semantics, where the - signal handler stays in force until an exec or an - explicit delete. Implied by SYSTEM5. -SYS5SETPGRP Use System V setpgrp() semantics. Implied by SYSTEM5. -HASFCHMOD Define this to one if you have the fchmod(2) system call. - This improves security. -HASFLOCK Set this if you prefer to use the flock(2) system call - rather than using fcntl-based locking. Fcntl locking - has some semantic gotchas, but many vendor systems - also interface it to lockd(8) to do NFS-style locking. - Unfortunately, may vendors implementations of fcntl locking - is just plain broken (e.g., locks are never released, - causing your sendmail to deadlock; when the kernel runs - out of locks your system crashes). For this reason, I - recommend always defining this unless you are absolutely - certain that your fcntl locking implementation really works. -HASUNAME Set if you have the "uname" system call. Implied by - SYSTEM5. -HASUNSETENV Define this if your system library has the "unsetenv" - subroutine. -HASSETSID Define this if you have the setsid(2) system call. This - is implied if your system appears to be POSIX compliant. -HASINITGROUPS Define this if you have the initgroups(3) routine. -HASSETVBUF Define this if you have the setvbuf(3) library call. - If you don't, setlinebuf will be used instead. This - defaults on if your compiler defines __STDC__. -HASSETREUID Define this if you have setreuid(2) ***AND*** root can - use setreuid to change to an arbitrary user. This second - condition is not satisfied on AIX 3.x. You may find that - your system has setresuid(2), (for example, on HP-UX) in - which case you will also have to #define setreuid(r, e) - to be the appropriate call. Some systems (such as Solaris) - have a compatibility routine that doesn't work properly, - but may have "saved user ids" properly implemented so you - can ``#define setreuid(r, e) seteuid(e)'' and have it work. - The important thing is that you have a call that will set - the effective uid independently of the real or saved uid - and be able to set the effective uid back again when done. - There's a test program in ../test/t_setreuid.c that will - try things on your system. Setting this improves the - security, since sendmail doesn't have to read .forward - and :include: files as root. There are certain attacks - that may be unpreventable without this call. -USESETEUID Define this to 1 if you have a seteuid(2) system call that - will allow root to set only the effective user id to an - arbitrary value ***AND*** you have saved user ids. This is - preferable to HASSETREUID if these conditions are fulfilled. - These are the semantics of the to-be-released revision of - Posix.1. The test program ../test/t_seteuid.c will try - this out on your system. If you define both HASSETREUID - and USESETEUID, the former is ignored. -HASLSTAT Define this if you have symbolic links (and thus the - lstat(2) system call). This improves security. Unlike - most other options, this one is on by default, so you - need to #undef it in conf.h if you don't have symbolic - links (these days everyone does). -HASSETRLIMIT Define this to 1 if you have the setrlimit(2) syscall. - You can define it to 0 to force it off. It is assumed - if you are running a BSD-like system. -HASULIMIT Define this if you have the ulimit(2) syscall (System V - style systems). HASSETRLIMIT overrides, as it is more - general. -HASWAITPID Define this if you have the waitpid(2) syscall. -HASGETDTABLESIZE - Define this if you have the getdtablesize(2) syscall. -HAS_ST_GEN Define this to 1 if your system has the st_gen field in - the stat structure (see stat(2)). -USESTRERROR Define this if you have the libc strerror function (which - should be declared in <errno.h>), and it should be used - instead of sys_errlist. -NEEDGETOPT Define this if you need a reimplementation of getopt(3). - On some systems, getopt does very odd things if called - to scan the arguments twice. This flag will ask sendmail - to compile in a local version of getopt that works - properly. -NEEDSTRTOL Define this if your standard C library does not define - strtol(3). This will compile in a local version. -NEEDVPRINTF Define this if your standard C library does not define - vprintf(3). Note that the resulting fake implementation - is not very elegant and may not even work on some - architectures. -NEEDFSYNC Define this if your standard C library does not define - fsync(2). This will try to simulate the operation using - fcntl(2); if that is not available it does nothing, which - isn't great, but at least it compiles and runs. -HASGETUSERSHELL Define this to 1 if you have getusershell(3) in your - standard C library. If this is not defined, or is defined - to be 0, sendmail will scan the /etc/shells file (no - NIS-style support, defaults to /bin/sh and /bin/csh if - that file does not exist) to get a list of unrestricted - user shells. This is used to determine whether users - are allowed to forward their mail to a program or a file. -NEEDPUTENV Define this if your system needs am emulation of the - putenv(3) call. Define to 1 to implement it in terms - of setenv(3) or to 2 to do it in terms of primitives. -NOFTRUNCATE Define this if you don't have the ftruncate(2) syscall. - If you don't have this system call, there is an unavoidable - race condition that occurs when creating alias databases. -GIDSET_T The type of entries in a gidset passed as the second - argument to getgroups(2). Historically this has been an - int, so this is the default, but some systems (such as - IRIX) pass it as a gid_t, which is an unsigned short. - This will make a difference, so it is important to get - this right! However, it is only an issue if you have - group sets. -SLEEP_T The type returned by the system sleep() function. - Defaults to "unsigned int". Don't worry about this - if you don't have compilation problems. -ARBPTR_T The type of an arbitrary pointer -- defaults to "void *". - If you are an very old compiler you may need to define - this to be "char *". -SOCKADDR_LEN_T The type used for the third parameter to accept(2), - getsockname(2), and getpeername(2), representing the - length of a struct sockaddr. Defaults to int. -SOCKOPT_LEN_T The type used for the fifth parameter to getsockopt(2) - and setsockopt(2), representing the length of the option - buffer. Defaults to int. -LA_TYPE The type of load average your kernel supports. These - can be one of: - LA_ZERO (1) -- it always returns the load average as - "zero" (and does so on all architectures). - LA_INT (2) to read /dev/kmem for the symbol avenrun and - interpret as a long integer. - LA_FLOAT (3) same, but interpret the result as a floating - point number. - LA_SHORT (6) to interpret as a short integer. - LA_SUBR (4) if you have the getloadavg(3) routine in your - system library. - LA_MACH (5) to use MACH-style load averages (calls - processor_set_info()), - LA_PROCSTR (7) to read /proc/loadavg and interpret it - as a string representing a floating-point - number (Linux-style). - LA_READKSYM (8) is an implementation suitable for some - versions of SVr4 that uses the MIOC_READKSYM ioctl - call to read /dev/kmem. - LA_DGUX (9) is a special implementation for DG/UX that uses - the dg_sys_info system call. - LA_HPUX (10) is an HP-UX specific version that uses the - pstat_getdynamic system call. - LA_IRIX6 (11) is an IRIX 6.x specific version that adapts - to 32 or 64 bit kernels; it is otherwise very similar - to LA_INT. - LA_KSTAT (12) uses the (Solaris-specific) kstat(3k) - implementation. - LA_DEVSHORT (13) reads a short from a system file (default: - /dev/table/avenrun) and scales it in the same manner - as LA_SHORT. - LA_INT, LA_SHORT, LA_FLOAT, and LA_READKSYM have several - other parameters that they try to divine: the name of your - kernel, the name of the variable in the kernel to examine, - the number of bits of precision in a fixed point load average, - and so forth. LA_DEVSHORT uses _PATH_AVENRUN to find the - device to be read to find the load average. - In desperation, use LA_ZERO. The actual code is in - conf.c -- it can be tweaked if you are brave. -FSHIFT For LA_INT, LA_SHORT, and LA_READKSYM, this is the number - of bits of load average after the binary point -- i.e., - the number of bits to shift right in order to scale the - integer to get the true integer load average. Defaults to 8. -_PATH_UNIX The path to your kernel. Needed only for LA_INT, LA_SHORT, - and LA_FLOAT. Defaults to "/unix" on System V, "/vmunix" - everywhere else. -LA_AVENRUN For LA_INT, LA_SHORT, and LA_FLOAT, the name of the kernel - variable that holds the load average. Defaults to "avenrun" - on System V, "_avenrun" everywhere else. -SFS_TYPE Encodes how your kernel can locate the amount of free - space on a disk partition. This can be set to SFS_NONE - (0) if you have no way of getting this information, - SFS_USTAT (1) if you have the ustat(2) system call, - SFS_4ARGS (2) if you have a four-argument statfs(2) - system call (and the include file is <sys/statfs.h>), - SFS_VFS (3), SFS_MOUNT (4), SFS_STATFS (5) if you have - the two-argument statfs(2) system call with includes in - <sys/vfs.h>, <sys/mount.h>, or <sys/statfs.h> respectively, - or SFS_STATVFS (6) if you have the two-argument statvfs(2) - call. The default if nothing is defined is SFS_NONE. -SFS_BAVAIL with SFS_4ARGS you can also set SFS_BAVAIL to the field name - in the statfs structure that holds the useful information; - this defaults to f_bavail. -SPT_TYPE Encodes how your system can display what a process is doing - on a ps(1) command (SPT stands for Set Process Title). Can - be set to: - SPT_NONE (0) -- Don't try to set the process title at all. - SPT_REUSEARGV (1) -- Pad out your argv with the information; - this is the default if none specified. - SPT_BUILTIN (2) -- The system library has setproctitle. - SPT_PSTAT (3) -- Use the PSTAT_SETCMD option to pstat(2) - to set the process title; this is used by HP-UX. - SPT_PSSTRINGS (4) -- Use the magic PS_STRINGS pointer (4.4BSD). - SPT_SYSMIPS (5) -- Use sysmips() supported by NEWS-OS 6. - SPT_SCO (6) -- Write kernel u. area. - SPT_CHANGEARGV (7) -- Write pointers to our own strings into - the existing argv vector. -SPT_PADCHAR Character used to pad the process title; if undefined, - the space character (0x20) is used. This is ignored if - SPT_TYPE != SPT_REUSEARGV -ERRLIST_PREDEFINED - If set, assumes that some header file defines sys_errlist. - This may be needed if you get type conflicts on this - variable -- otherwise don't worry about it. -WAITUNION The wait(2) routine takes a "union wait" argument instead - of an integer argument. This is for compatibility with - old versions of BSD. -SCANF You can set this to extend the F command to accept a - scanf string -- this gives you a primitive parser for - class definitions -- BUT it can make you vulnerable to - core dumps if the target file is poorly formed. -SYSLOG_BUFSIZE You can define this to be the size of the buffer that - syslog accepts. If it is not defined, it assumes a - 1024-byte buffer. If the buffer is very small (under - 256 bytes) the log message format changes -- each - e-mail message will log many more messages, since it - will log each piece of information as a separate line - in syslog. -BROKEN_RES_SEARCH - On Ultrix (and maybe other systems?) if you use the - res_search routine with an unknown host name, it returns - -1 but sets h_errno to 0 instead of HOST_NOT_FOUND. If - you set this, sendmail considers 0 to be the same as - HOST_NOT_FOUND. -NAMELISTMASK If defined, values returned by nlist(3) are masked - against this value before use -- a common value is - 0x7fffffff to strip off the top bit. -BSD4_4_SOCKADDR If defined, socket addresses have an sa_len field that - defines the length of this address. -SAFENFSPATHCONF Set this to 1 if and only if you have verified that a - pathconf(2) call with _PC_CHOWN_RESTRICTED argument on an - NFS filesystem where the underlying system allows users to - give away files to other users returns <= 0. Be sure you - try both on NFS V2 and V3. Some systems assume that their - local policy apply to NFS servers -- this is a bad - assumption! The test/t_pathconf.c program will try this - for you -- you have to run it in a directory that is - mounted from a server that allows file giveaway. -SIOCGIFCONF_IS_BROKEN - Set this if your system has an SIOCGIFCONF ioctl defined, - but it doesn't behave the same way as "most" systems (BSD, - Solaris, SunOS, HP-UX, etc.) -SIOCGIFNUM_IS_BROKEN - Set this if your system has an SIOCGIFNUM ioctl defined, - but it doesn't behave the same way as "most" systems - (Solaris, HP-UX). - - - -+-----------------------+ -| COMPILE-TIME FEATURES | -+-----------------------+ - -There are a bunch of features that you can decide to compile in, such -as selecting various database packages and special protocol support. -Several are assumed based on other compilation flags -- if you want to -"un-assume" something, you probably need to edit conf.h. Compilation -flags that add support for special features include: - -NDBM Include support for "new" DBM library for aliases and maps. - Normally defined in the Makefile. -NEWDB Include support for Berkeley "db" package (hash & btree) - for aliases and maps. Normally defined in the Makefile. -OLD_NEWDB If non-zero, the version of NEWDB you have is the old - one that does not include the "fd" call. This call was - added in version 1.5 of the Berkeley DB code. If you - use -DOLD_NEWDB=0 it forces you to use the new interface. -NIS Define this to get NIS (YP) support for aliases and maps. - Normally defined in the Makefile. -NISPLUS Define this to get NIS+ support for aliases and maps. - Normally defined in the Makefile. -HESIOD Define this to get Hesiod support for aliases and maps. - Normally defined in the Makefile. -NETINFO Define this to get NeXT NetInfo support for aliases and maps. - Normally defined in the Makefile. -USERDB Define this to 1 to include support for the User Information - Database. Implied by NEWDB or HESIOD. You can use - -DUSERDB=0 to explicitly turn it off. -IDENTPROTO Define this as 1 to get IDENT (RFC 1413) protocol support. - This is assumed unless you are running on Ultrix or - HP-UX, both of which have a problem in the UDP - implementation. You can define it to be 0 to explicitly - turn off IDENT protocol support. If defined off, the code - is actually still compiled in, but it defaults off; you - can turn it on by setting the IDENT timeout to 30s in the - configuration file. -IP_SRCROUTE Define this to 1 to get IP source routing information - displayed in the Received: header. This is assumed on - most systems, but some (e.g., Ultrix) apparently have a - broken version of getsockopt that doesn't properly - support the IP_OPTIONS call. You probably want this if - your OS can cope with it. Symptoms of failure will be that - it won't compile properly (that is, no support for fetching - IP_OPTIONs), or it compiles but source-routed TCP connections - either refuse to open or open and hang for no apparent reason. - Ultrix and AIX3 are known to fail this way. -LOG Set this to get syslog(3) support. Defined by default - in conf.h. You want this if at all possible. -NETINET Set this to get TCP/IP support. Defined by default - in conf.h. You probably want this. -NETISO Define this to get ISO networking support. -NETUNIX Define this to get Unix domain networking support. Defined - by default. A few bizarre systems (SCO, ISC, Altos) don't - support this networking domain. -SMTP Define this to get the SMTP code. Implied by NETINET - or NETISO. -NAMED_BIND If non-zero, include DNS (name daemon) support, including - MX support. The specs say you must use this if you run - SMTP. You don't have to be running a name server daemon - on your machine to need this -- any use of the DNS resolver, - including remote access to another machine, requires this - option. Defined by default in conf.h. Define it to zero - ONLY on machines that do not use DNS in any way. -QUEUE Define this to get queueing code. Implied by NETINET - or NETISO; required by SMTP. This gives you other good - stuff -- it should be on. -DAEMON Define this to get general network support. Implied by - NETINET or NETISO. Defined by default in conf.h. You - almost certainly want it on. -MATCHGECOS Permit fuzzy matching of user names against the full - name (GECOS) field in the /etc/passwd file. This should - probably be on, since you can disable it from the config - file if you want to. Defined by default in conf.h. -MIME8TO7 If non-zero, include 8 to 7 bit MIME conversions. This - also controls advertisement of 8BITMIME in the ESMTP - startup dialogue. -MIME7TO8 If non-zero, include 7 to 8 bit MIME conversions. -HES_GETMAILHOST Define this to 1 if you are using Hesiod with the - hes_getmailhost() routine. This is included with the MIT - Hesiod distribution, but not with the DEC Hesiod distribution. -XDEBUG Do additional internal checking. These don't cost too - much; you might as well leave this on. -TCPWRAPPERS Turns on support for the TCP wrappers library (-lwrap). - See below for further information. -SECUREWARE Enable calls to the SecureWare luid enabling/changing routines. - SecureWare is a C2 security package added to several UNIX's - (notably ConvexOS) to get a C2 Secure system. This - option causes mail delivery to be done with the luid of the - recipient. -SHARE_V1 Support for the fair share scheduler, version 1. Setting to - 1 causes final delivery to be done using the recipients - resource limitations. So far as I know, this is only - supported on ConvexOS. - - -+---------------------+ -| DNS/RESOLVER ISSUES | -+---------------------+ - -Many systems have old versions of the resolver library. At a minimum, -you should be running BIND 4.8.3; older versions may compile, but they -have known bugs that should give you pause. - -Common problems in old versions include "undefined" errors for -dn_skipname. - -Some people have had a problem with BIND 4.9; it uses some routines -that it expects to be externally defined such as strerror(). It may -help to link with "-l44bsd" to solve this problem. This has apparently -been fixed in later versions of BIND, starting around 4.9.3. In other -words, if you use 4.9.0 through 4.9.2, you need -l44bsd; for earlier or -later versions, you do not. - -!PLEASE! be sure to link with the same version of the resolver as -the header files you used -- some people have used the 4.9 headers -and linked with BIND 4.8 or vice versa, and it doesn't work. -Unfortunately, it doesn't fail in an obvious way -- things just -subtly don't work. - -WILDCARD MX RECORDS ARE A BAD IDEA! The only situation in which they -work reliably is if you have two versions of DNS, one in the real world -which has a wildcard pointing to your firewall, and a completely -different version of the database internally that does not include -wildcard MX records that match your domain. ANYTHING ELSE WILL GIVE -YOU HEADACHES! - - -+-------------------------------------+ -| OPERATING SYSTEM AND COMPILE QUIRKS | -+-------------------------------------+ - -GCC 2.5.x problems *** IMPORTANT *** - Date: Mon, 29 Nov 93 19:08:44 PST - From: wilson@cygnus.com (Jim Wilson) - Message-Id: <9311300308.AA04608@cygnus.com> - To: kenner@vlsi1.ultra.nyu.edu - Subject: [cattelan@thebarn.com: gcc 2.5.4-2.5.5 -O bug] - Cc: cattelan@thebarn.com, rms@gnu.ai.mit.edu, sendmail@cs.berkeley.edu - - This fixes a problem that occurs when gcc 2.5.5 is used to compile - sendmail 8.6.4 with optimization on a sparc. - - Mon Nov 29 19:00:14 1993 Jim Wilson (wilson@sphagnum.cygnus.com) - - * reload.c (find_reloads_toplev): Replace obsolete reference to - BYTE_LOADS_*_EXTEND with LOAD_EXTEND_OP. - - *** clean-ss-931128/reload.c Sun Nov 14 16:20:01 1993 - --- ss-931128/reload.c Mon Nov 29 18:52:55 1993 - *************** find_reloads_toplev (x, opnum, type, ind - *** 3888,3894 **** - force a reload in that case. So we should not do anything here. */ - - else if (regno >= FIRST_PSEUDO_REGISTER - ! #if defined(BYTE_LOADS_ZERO_EXTEND) || defined(BYTE_LOADS_SIGN_EXTEND) - && (GET_MODE_SIZE (GET_MODE (x)) - <= GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)))) - #endif - --- 3888,3894 ---- - force a reload in that case. So we should not do anything here. */ - - else if (regno >= FIRST_PSEUDO_REGISTER - ! #ifdef LOAD_EXTEND_OP - && (GET_MODE_SIZE (GET_MODE (x)) - <= GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)))) - #endif - -GCC 2.7.x problems - Apparently GCC 2.7.0 on the Pentium processor has optimization - problems. I recommend against using -O on that architecture. This - has been seen on FreeBSD 2.0.5 RELEASE. - -GDBM GDBM does not work with sendmail 8.8 because the additional - security checks and file locking cause problems. Unfortunately, - gdbm does not provide a compile flag in its version of ndbm.h so - the code can adapt. We expect this to be fixed in 8.9, but - probably at the cost of a new command line compile flag. - -Configuration file location - Up to 8.6, sendmail tried to find the sendmail.cf file in the same - place as the vendors had put it, even when this was obviously - stupid. As of 8.7, sendmail ALWAYS looks for /etc/sendmail.cf. - You can get sendmail to use the stupid vendor .cf location by - adding -DUSE_VENDOR_CF_PATH during compilation, but this may break - support programs and scripts that need to find sendmail.cf. You - are STRONGLY urged to use symbolic links if you want to use the - vendor location rather than changing the location in the sendmail - binary. - -ld: fatal: library -l44bsd: not found - Most of the Makefiles include -l44bsd in the LIBS= definition; - this is because several versions of BIND (4.9.0, 4.9.1, 4.9.2) - require this library. If you are running one of these versions, - install this library. Otherwise, just delete "-l44bsd" from the - LIBS= line in the Makefile. - -SunOS 4.x (Solaris 1.x) - You may have to use -lresolv on SunOS. However, beware that - this links in a new version of gethostbyname that does not - understand NIS, so you must have all of your hosts in DNS. - - Some people have reported problems with the SunOS version of - -lresolv and/or in.named, and suggest that you get a newer - version. The symptoms are delays when you connect to the - SMTP server on a SunOS machine or having your domain added to - addresses inappropriately. There is a version of BIND - version 4.9 on gatekeeper.DEC.COM in pub/BSD/bind/4.9. - - There is substantial disagreement about whether you can make - this work with resolv+, which allows you to specify a search-path - of services. Some people report that it works fine, others - claim it doesn't work at all (including causing sendmail to - drop core when it tries to do multiple resolv+ lookups for a - single job). I haven't tried resolv+, as we use DNS exclusively. - - Should you want to try resolv+, it is on ftp.uu.net in - /networking/ip/dns. - - Apparently getservbyname() can fail under moderate to high - load under some circumstances. This will exhibit itself as - the message ``554 makeconnection: service "smtp" unknown''. - The problem has been traced to one or more blank lines in - /etc/services on the NIS server machine. Delete these - and it should work. This info is thanks to Brian Bartholomew - <bb@math.ufl.edu> of I-Kinetics, Inc. - -SunOS 4.0.2 (Sun 386i) - Date: Fri, 25 Aug 1995 11:13:58 +0200 (MET DST) - From: teus@oce.nl - - Sendmail 8.7.Beta.12 compiles and runs nearly out of the box with the - following changes: - * Don't use /usr/5bin in your PATH, but make /usr/5bin/uname - available as "uname" command. - * Use the defines "-DBSD4_3 -DNAMED_BIND=0" in the - Makefile.SunOS.4.0, which is selected via the "uname" command. - I recommend to make available the db-library on the system first - (and change the Makefile to use this library). - Note that the sendmail.cf and aliases files are found in /etc. - -SunOS 4.1.3, 4.1.3_U1 - Sendmail causes crashes on SunOS 4.1.3 and 4.1.3_U1. According - to Sun bug number 1077939: - - If an application does a getsockopt() on a SOCK_STREAM (TCP) socket - after the other side of the connection has sent a TCP RESET for - the stream, the kernel gets a Bus Trap in the tcp_ctloutput() or - ip_ctloutput() routine. - - For 4.1.3, this is fixed in patch 100584-08, available on the - Sunsolve 2.7.1 or later CDs. For 4.1.3_U1, this is fixed in patch - 101790-01 (SunOS 4.1.3_U1: TCP socket and reset problems). - -Solaris 2.x (SunOS 5.x) - To compile for Solaris, the Makefile chosen by makesendmail must - include a SOLARIS definition which reflects the Solaris version - (i.e. -DSOLARIS=20400 for 2.4 or -DSOLARIS=20501 for 2.5.1). - If you are using gcc, make sure -I/usr/include is not used (or - it might complain about TopFrame). If you are using Sun's cc, - make sure /opt/SUNWspro/bin/cc is used instead of /usr/ucb/cc - (or it might complain about tm_zone). - - To the best of my knowledge, Solaris does not have the - gethostbyname problem described above. However, it does - have another one: - - From a correspondent: - - For solaris 2.2, I have - - hosts: files dns - - in /etc/nsswitch.conf and /etc/hosts has to have the fully - qualified host name. I think "files" has to be before "dns" - in /etc/nsswitch.conf during bootup. - - From another correspondent: - - When running sendmail under Solaris, the gethostbyname() - hack in conf.c which should perform proper canonicalization - of host names could fail. Result: the host name is not - canonicalized despite the hack, and you'll have to define $j - and $m in sendmail.cf somewhere. - - The reason could be that /etc/nsswitch.conf is improperly - configured (at least from sendmail's point of view). For - example, the line - - hosts: files nisplus dns - - will make gethostbyname() look in /etc/hosts first, then ask - nisplus, then dns. However, if /etc/hosts does not contain - the full canonicalized hostname, then no amount of - gethostbyname()s will work. - - Solution (or rather, a workaround): Ask nisplus first, then - dns, then local files: - - hosts: nisplus dns [NOTFOUND=return] files - - The Solaris "syslog" function is apparently limited to something - about 90 characters because of a kernel limitation. If you have - source code, you can probably up this number. You can get patches - that fix this problem: the patch ids are: - - Solaris 2.1 100834 - Solaris 2.2 100999 - Solaris 2.3 101318 - - Be sure you have the appropriate patch installed or you won't - see system logging. - -Solaris 2.4 (SunOS 5.4) - If you include /usr/lib at the end of your LD_LIBRARY_PATH you run - the risk of getting the wrong libraries under some circumstances. - This is because of a new feature in Solaris 2.4, described by - Rod.Evans@Eng.Sun.COM: - - >> Prior to SunOS 5.4, any LD_LIBRARY_PATH setting was ignored by the - >> runtime linker if the application was setxid (secure), thus your - >> applications search path would be: - >> - >> /usr/local/lib LD_LIBRARY_PATH component - IGNORED - >> /usr/lib LD_LIBRARY_PATH component - IGNORED - >> /usr/local/lib RPATH - honored - >> /usr/lib RPATH - honored - >> - >> the effect is that path 3 would be the first used, and this would - >> satisfy your resolv.so lookup. - >> - >> In SunOS 5.4 we made the LD_LIBRARY_PATH a little more flexible. - >> People who developed setxid applications wanted to be able to alter - >> the library search path to some degree to allow for their own - >> testing and debugging mechanisms. It was decided that the only - >> secure way to do this was to allow a `trusted' path to be used in - >> LD_LIBRARY_PATH. The only trusted directory we presently define - >> is /usr/lib. Thus a setuid root developer could play with some - >> alternative shared object implementations and place them in - >> /usr/lib (being root we assume they'ed have access to write in this - >> directory). This change was made as part of 1155380 - after a - >> *huge* amount of discussion regarding the security aspect of things. - >> - >> So, in SunOS 5.4 your applications search path would be: - >> - >> /usr/local/lib from LD_LIBRARY_PATH - IGNORED (untrustworthy) - >> /usr/lib from LD_LIBRARY_PATH - honored (trustworthy) - >> /usr/local/lib from RPATH - honored - >> /usr/lib from RPATH - honored - >> - >> here, path 2 would be the first used. - -Solaris 2.6 (SunOS 5.6) - If you built sendmail 8.8.1 through 8.8.4 inclusive on a Solaris 2.5 - system, that binary will not run on Solaris 2.6, due to problems with - incompatible snprintf(3s) calls. This problem is fixed in sendmail - 8.8.5. - -Solaris 2.5.1 (SunOS 5.5.1) and 2.6 (SunOS 5.6) - Apparently Solaris 2.5.1 patch 103663-01 installs a new - /usr/include/resolv.h file that defines the __P macro without - checking to see if it is already defined. This new resolv.h is also - included in the Solaris 2.6 distribution. This causes compile - warnings such as: - - In file included from daemon.c:51: - /usr/include/resolv.h:208: warning: `__P' redefined - cdefs.h:58: warning: this is the location of the previous definition - - These warnings can be safely ignored or you can create a resolv.h - file in the obj.SunOS.5.5.1.* or obj.SunOS.5.6.* directory that reads: - - #undef __P - #include "/usr/include/resolv.h" - - Sun is aware of the problem (Sun bug ID 4081053) and it will be fixed - in a to-be-released patch. - -Ultrix - By default, the IDENT protocol is turned off on Ultrix. If you - are running Ultrix 4.4 or later, or if you have included patch - CXO-8919 for Ultrix 4.2 or 4.3 to fix the TCP problem, you can turn - IDENT on in the configuration file by setting the "ident" timeout - to 30 seconds. - -Digital UNIX (formerly DEC OSF/1) - If you are compiling on OSF/1 (DEC Alpha), you must use - -L/usr/shlib (otherwise it core dumps on startup). You may also - need -mld to get the nlist() function, although some versions - apparently don't need this. - - Also, the enclosed makefile removed /usr/sbin/smtpd; if you need - it, just create the link to the sendmail binary. - - On DEC OSF/1 3.2 or earlier, the MatchGECOS option doesn't work - properly due to a bug in the getpw* routines. If you want to use - this, use -DDEC_OSF_BROKEN_GETPWENT=1. The problem is fixed in 3.2C. - - On Digital UNIX 4.0 and later, Berkeley DB is included with the - operating system and already has the ndbm.o module removed. However, - Digital has modified the original Berkeley DB db.h include file. - This results in the following warning while compiling map.c and udb.c: - - cc: Warning: /usr/include/db.h, line 74: The redefinition of the macro - "__signed" conflicts with a current definition because the replacement - lists differ. The redefinition is now in effect. - #define __signed signed - ------------------------^ - - This warning can be ignored. - -IRIX - The header files on SGI IRIX are completely prototyped, and as - a result you can sometimes get some warning messages during - compilation. These can be ignored. There are two errors in - deliver only if you are using gcc, both of the form ``warning: - passing arg N of `execve' from incompatible pointer type''. - Also, if you compile with -DNIS, you will get a complaint - about a declaration of struct dom_binding in a prototype - when compiling map.c; this is not important because the - function being prototyped is not used in that file. - - In order to compile sendmail you will have had to install - the developers' option in order to get the necessary include - files. - - If you compile with -lmalloc (the fast memory allocator), you may - get warning messages such as the following: - - ld32: WARNING 85: definition of _calloc in /usr/lib32/libmalloc.so - preempts that definition in /usr/lib32/mips3/libc.so. - ld32: WARNING 85: definition of _malloc in /usr/lib32/libmalloc.so - preempts that definition in /usr/lib32/mips3/libc.so. - ld32: WARNING 85: definition of _realloc in /usr/lib32/libmalloc.so - preempts that definition in /usr/lib32/mips3/libc.so. - ld32: WARNING 85: definition of _free in /usr/lib32/libmalloc.so - preempts that definition in /usr/lib32/mips3/libc.so. - ld32: WARNING 85: definition of _cfree in /usr/lib32/libmalloc.so - preempts that definition in /usr/lib32/mips3/libc.so. - - These are unavoidable and innocuous -- just ignore them. - - According to Dave Sill <de5@ornl.gov>, there is a version of the - Berkeley db library patched to run on Irix 6.2 available from - http://reality.sgi.com/ariel/db-1.85-irix.tar.Z . - -NeXT or NEXTSTEP - NEXTSTEP 3.3 and earlier ship with the old DBM library. You will - need to acquire the new Berkeley DB from ftp.cs.berkeley.edu. - Install it in /usr/local/{lib,include}. - - If you are compiling on NEXTSTEP, you will have to create an - empty file "unistd.h" and create a file "dirent.h" containing: - - #include <sys/dir.h> - #define dirent direct - - (The Makefile.NeXT should try to do both of these for you.) - - Apparently, there is a bug in getservbyname on Nextstep 3.0 - that causes it to fail under some circumstances with the - message "SYSERR: service "smtp" unknown" logged. You should - be able to work around this by including the line: - - OOPort=25 - - in your .cf file. - - You may have to use -DNeXT. - -BSDI (BSD/386) 1.0, NetBSD 0.9, FreeBSD 1.0 - The "m4" from BSDI won't handle the config files properly. - I haven't had a chance to test this myself. - - The M4 shipped in FreeBSD and NetBSD 0.9 don't handle the config - files properly. One must use either GNU m4 1.1 or the PD-M4 - recently posted in comp.os.386bsd.bugs (and maybe others). - NetBSD-current includes the PD-M4 (as stated in the NetBSD file - CHANGES). - - FreeBSD 1.0 RELEASE has uname(2) now. Use -DUSEUNAME in order to - use it (look into Makefile.FreeBSD). NetBSD-current may have - it too but it has not been verified. - - You cannot port the latest version of the Berkeley db library - and use it with sendmail without recompiling the world. This - is because C library routines use the older version which have - incompatible header files -- the result is that it can't read - other system files, such as /etc/passwd, unless you use the - new db format throughout your system. You should normally just - use the version of db supplied in your release. You may need - to use -DOLD_NEWDB=1 to make this work -- this turns off some - new interface calls (for file locking) that are not in older - versions of db. You'll get compile errors if you need this - flag and don't have it set. - -4.3BSD - If you are running a "virgin" version of 4.3BSD, you'll have - a very old resolver and be missing some header files. The - header files are simple -- create empty versions and everything - will work fine. For the resolver you should really port a new - version (4.8.3 or later) of the resolver; 4.9 is available on - gatekeeper.DEC.COM in pub/BSD/bind/4.9. If you are really - determined to continue to use your old, buggy version (or as - a shortcut to get sendmail working -- I'm sure you have the - best intentions to port a modern version of BIND), you can - copy ../contrib/oldbind.compat.c into src and add - oldbind.compat.o to OBJADD in the Makefile. - -A/UX - Date: Tue, 12 Oct 1993 18:28:28 -0400 (EDT) - From: "Eric C. Hagberg" <hagberg@med.cornell.edu> - Subject: Fix for A/UX ndbm - - I guess this isn't really a sendmail bug, however, it is something - that A/UX users should be aware of when compiling sendmail 8.6. - - Apparently, the calls that sendmail is using to the ndbm routines - in A/UX 3.0.x contain calls to "broken" routines, in that the - aliases database will break when it gets "just a little big" - (sorry I don't have exact numbers here, but it broke somewhere - around 20-25 aliases for me.), making all aliases non-functional - after exceeding this point. - - What I did was to get the gnu-dbm-1.6 package, compile it, and - then re-compile sendmail with "-lgdbm", "-DNDBM", and using the - ndbm.h header file that comes with the gnu-package. This makes - things behave properly. - [NOTE: see comment above about GDBM] - - I suppose porting the New Berkeley db package is another route, - however, I made a quick attempt at it, and found it difficult - (not easy at least); the gnu-dbm package "configured" and - compiled easily. - -SCO Unix - From: Thomas Essebier <tom@stallion.oz.au> - Organisation: Stallion Technologies Pty Ltd. - - It will probably help those who are trying to configure sendmail 8.6.9 - to know that if they are on SCO, they had better set - OI-dnsrch - or they will core dump as soon as they try to use the resolver. - ie. although SCO has _res.dnsrch defined, and is kinda BIND 4.8.3, it - does not inititialise it, nor does it understand 'search' in - /etc/named.boot. - - sigh - - -DG/UX - Doug Anderson <dlander@afterlife.ncsc.mil> has successfully run - V8 on the DG/UX 5.4.2 and 5.4R3.x platforms under heavy usage. - Originally, the DG /bin/mail program wasn't compatible with - the V8 sendmail, since the DG /bin/mail requires the environment - variable "_FORCE_MAIL_LOCAL_=yes" be set. Version 8.7 now includes - this in the environment before invoking the local mailer. Some - have used procmail to avoid this problem in the past. It works - but some have experienced file locking problems with their DG/UX - ports of procmail. - -Apollo DomainOS - If you are compiling on Apollo, you will have to create an empty - file "unistd.h" and create a file "dirent.h" containing: - - #include <sys/dir.h> - #define dirent direct - - (The Makefile.DomainOS will attempt to do both of these for you.) - -HP-UX 8.00 - Date: Mon, 24 Jan 1994 13:25:45 +0200 - From: Kimmo Suominen <Kimmo.Suominen@lut.fi> - Subject: 8.6.5 w/ HP-UX 8.00 on s300 - - Just compiled and fought with sendmail 8.6.5 on a HP9000/360 (ie. a - series 300 machine) running HP-UX 8.00. - - I was getting segmentation fault when delivering to a local user. - With debugging I saw it was faulting when doing _free@libc... *sigh* - It seems the new implementation of malloc on s300 is buggy as of 8.0, - so I tried out the one in -lmalloc (malloc(3X)). With that it seems - to work just dandy. - - When linking, you will get the following error: - - ld: multiply defined symbol _freespace in file /usr/lib/libmalloc.a - - but you can just ignore it. You might want to add this info to the - README file for the future... - -Linux - Something broke between versions 0.99.13 and 0.99.14 of Linux: - the flock() system call gives errors. If you are running .14, - you must not use flock. You can do this with -DHASFLOCK=0. - - Around the inclusion of bind-4.9.3 & linux libc-4.6.20, the - initialization of the _res structure changed. If /etc/hosts.conf - was configured as "hosts, bind" the resolver code could return - "Name server failure" errors. This is supposedly fixed in - later versions of libc (>= 4.6.29?), and later versions of - sendmail (> 8.6.10) try to work around the problem. - - Some older versions (< 4.6.20?) of the libc/include files conflict - with sendmail's version of cdefs.h. Deleting sendmail's version - on those systems should be non-harmful, and new versions don't care. - - Sendmail assumes that libc has snprintf, which has been true since - libc 4.7.0. If you are running an older version, you will need to - use -DHASSNPRINTF=0 in the Makefile. If may be able to use -lbsd - (which includes snprintf) instead of turning this off on versions - of libc between 4.4.4 and 4.7.0 (snprintf improves security, so - you want to use this if at all possible). - - NOTE ON LINUX & BIND: By default, the Makefiles for linux include - header files in /usr/local/include and libraries in /usr/local/lib. - If you've installed BIND on your system, the header files typically - end up in the search path and you need to add "-lresolv" to the - LIBS line in your Makefile. Really old versions may need to include - "-l44bsd" as well (particularly if the link phase complains about - missing strcasecmp, strncasecmp or strpbrk). Complaints about an - undefined reference to `__dn_skipname' in domain.o are a sure sign - that you need to add -lresolv to LIBS. Newer versions of linux - are basically threaded BIND, so you may or may not see complaints - if you accidentally mix BIND headers/libraries with virginal libc. - If you have BIND headers in /usr/local/include (resolv.h, etc) - you *should* be adding -lresolv to LIBS. Data structures may change - and you'd be asking for a core dump. - -AIX 3.x - This version of sendmail does not support MB, MG, and MR resource - records, which are supported by AIX sendmail. - - Several people have reported that the IBM-supplied named returns - fairly random results -- the named should be replaced. It is not - necessary to replace the resolver, which will simplify installation. - A new BIND resolver can be found at http://www.isc.org/isc/. - -AIX 3.1.x - The supplied load average code only works correctly for AIX 3.2.x. - For 3.1, use -DLA_TYPE=LA_SUBR and get the latest ``monitor'' - package by Jussi Maki <jmaki@hut.fi> from ftp.funet.fi in the - directory pub/unix/AIX/rs6000/monitor-1.12.tar.Z; use the loadavgd - daemon, and the getloadavg subroutine supplied with that package. - If you don't care about load average throttling, just turn off - load average checking using -DLA_TYPE=LA_ZERO. - -AIX 2.2.1 - Date: Mon Dec 4 14:14:56 CST 1995 - From: Mark Whetzel <markw@antimatr.houston.tx.us> - Subject: Porting sendmail 8.7.2 to AIX V2 on the RT. - - This version of sendmail does not support MB, MG, and MR resource - records, which are supported by AIX sendmail. - - AIX V2 on the RT does not have 'paths.h'. Create a null - file in the 'obj' directory to remove this compile error. - - A patch file is needed to get the BSD 'db' library to compile - for AIX/RT. I have sent the necessary updates to the author, - but they may not be immediately available. - - The original AIX/RT resolver libraries are very old, and you - should get the latest BIND to replace it. The 4.8.3 version - has been tested, but 4.9.x is out and should work. - - To make the load average code work correctly requires an - external routine, as the kernel does not maintain system - load averages, similar to AIX V3.1.x. A reverse port of the - older 1.05 'monitor' load average daemon code written by - Jussi Maki that will work on AIX V2 for the RT is available - by E-mail to Mark Whetzel <markw@antimatr.houston.tx.us>. - That code depends on an external daemon to collect system - load information, and the external routine 'getloadavg', - that will return that information. The 'LA_SUBR' define - will handle this for AIX V2 on the RT. - - Note: You will have to change the Makefile.AIX.2 to correctly - point to the locatons of the updated BIND source tree and - the location of the 'newdb' tree and library location. - You will also have to change the Makefile.AIX.2 to know - about the location of the 'getloadavg' routine if you use - the LA_SUBR define. - - - Manual pages will format correctly if given the mandoc macros - and used with nroff. I have not tried groff. - -RISC/os - RISC/os from MIPS is a merged AT&T/Berkeley system. When you - compile on that platform you will get duplicate definitions - on many files. You can ignore these. - -System V Release 4 Based Systems - There is a single Makefile that is intended for all SVR4-based - systems (called Makefile.SVR4). It defines __svr4__, which is - predefined by some compilers. If your compiler already defines - this compile variable, you can delete the definition from the - Makefile. - - It's been tested on Dell Issue 2.2. - -DELL SVR4 - Date: Mon, 06 Dec 1993 10:42:29 EST - From: "Kimmo Suominen" <kim@grendel.lut.fi> - Message-ID: <2d0352f9.lento29@lento29.UUCP> - To: eric@cs.berkeley.edu - Cc: sendmail@cs.berkeley.edu - Subject: Notes for DELL SVR4 - - Eric, - - Here are some notes for compiling Sendmail 8.6.4 on DELL SVR4. I ran - across these things when helping out some people who contacted me by - e-mail. - - 1) Use gcc 2.4.5 (or later?). Dell distributes gcc 2.1 with their - Issue 2.2 Unix. It is too old, and gives you problems with - clock.c, because sigset_t won't get defined in <sys/signal.h>. - This is due to a problematic protection rule in there, and is - fixed with gcc 2.4.5. - - 2) If you don't use the new Berkeley DB (-DNEWDB), then you need - to add "-lc -lucb" to the libraries to link with. This is because - the -ldbm distributed by Dell needs the bcopy, bcmp and bzero - functions. It is important that you specify both libraries in - the given order to be sure you only get the BSTRING functions - from the UCB library (and not the signal routines etc.). - - 3) Don't leave out "-lelf" even if compiling with "-lc -lucb". - The UCB library also has another copy of the nlist routines, - but we do want the ones from "-lelf". - - If anyone needs a compiled gcc 2.4.5 and/or a ported DB library, they - can use anonymous ftp to fetch them from lut.fi in the /kim directory. - They are copies of what I use on grendel.lut.fi, and offering them - does not imply that I would also support them. I have sent the DB - port for SVR4 back to Keith Bostic for inclusion in the official - distribution, but I haven't heard anything from him as of today. - - - gcc-2.4.5-svr4.tar.gz (gcc 2.4.5 and the corresponding libg++) - - db-1.72.tar.gz (with source, objects and a installed copy) - - Cheers - + Kim - -- - * Kimmo.Suominen@lut.fi * SysVr4 enthusiast at GRENDEL.LUT.FI * - * KIM@FINFILES.BITNET * Postmaster and Hostmaster at LUT.FI * - * + 358 200 865 718 * Unix area moderator at NIC.FUNET.FI * - -ConvexOS 10.1 and below - In order to use the name server, you must create the file - /etc/use_nameserver. If this file does not exist, the call - to res_init() will fail and you will have absolutely no - access to DNS, including MX records. - -Amdahl UTS 2.1.5 - In order to get UTS to work, you will have to port BIND 4.9. - The vendor's BIND is reported to be ``totally inadequate.'' - See sendmail/contrib/AmdahlUTS.patch for the patches necessary - to get BIND 4.9 compiled for UTS. - -UnixWare 2.0 - According to Alexander Kolbasov <sasha@unitech.gamma.ru>, - the m4 on UnixWare 2.0 (still in Beta) will core dump on the - config files. GNU m4 and the m4 from UnixWare 1.x both work. - -UNICOS 8.0.3.4 - Some people have reported that the -O flag on UNICOS can cause - problems. You may want to turn this off if you have problems - running sendmail. Reported by Jerry G. DeLapp <jgd@acl.lanl.gov>. - -Non-DNS based sites - This version of sendmail always tries to connect to the Domain - Name System (DNS) to resolve names, regardless of the setting - of the `I' option. On most systems that are not running DNS, - this will fail quickly and sendmail will continue, but on some - systems it has a long timeout. If you have this problem, you - will have to recompile without NAMED_BIND. Some people have - claimed that they have successfully used "OI+USEVC" to force - sendmail to use a virtual circuit -- this will always time out - quickly, but also tells sendmail that a failed connection - should requeue the message (probably not what you intended). - A future release of sendmail will correct this problem. - -Both NEWDB and NDBM - If you use both -DNDBM and -DNEWDB, you must delete the module - ndbm.o from libdb.a and delete the file "ndbm.h" from the files - that get installed (that is, use the OLD ndbm.h, not the new - ndbm.h). This compatibility module maps ndbm calls into DB - calls, and breaks things rather badly. - -GNU getopt - I'm told that GNU getopt has a problem in that it gets confused - by the double call. Use the version in conf.c instead. - -BIND 4.9.2 and Ultrix - If you are running on Ultrix, be sure you read conf/Info.Ultrix - in the BIND distribution very carefully -- there is information - in there that you need to know in order to avoid errors of the - form: - - /lib/libc.a(gethostent.o): sethostent: multiply defined - /lib/libc.a(gethostent.o): endhostent: multiply defined - /lib/libc.a(gethostent.o): gethostbyname: multiply defined - /lib/libc.a(gethostent.o): gethostbyaddr: multiply defined - - during the link stage. - -strtoul - Some compilers (notably gcc) claim to be ANSI C but do not - include the ANSI-required routine "strtoul". If your compiler - has this problem, you will get an error in srvrsmtp.c on the - code: - - # ifdef defined(__STDC__) && !defined(BROKEN_ANSI_LIBRARY) - e->e_msgsize = strtoul(vp, (char **) NULL, 10); - # else - e->e_msgsize = strtol(vp, (char **) NULL, 10); - # endif - - You can use -DBROKEN_ANSI_LIBRARY to get around this problem. - -Listproc 6.0c - Date: 23 Sep 1995 23:56:07 GMT - Message-ID: <95925101334.~INN-AUMa00187.comp-news@dl.ac.uk> - From: alansz@mellers1.psych.berkeley.edu (Alan Schwartz) - Subject: Listproc 6.0c + Sendmail 8.7 [Helpful hint] - - Just upgraded to sendmail 8.7, and discovered that listproc 6.0c - breaks, because it, by default, sends a blank "HELO" rather than - a "HELO hostname" when using the 'system' or 'telnet' mailmethod. - - The fix is to include -DZMAILER in the compilation, which will - cause it to use "HELO hostname" (which Z-mail apparently requires - as well. :) - -LDAP - LDAP was provided by Booker Bense <bbense@networking.stanford.edu> of - Stanford University. From Booker: - - - The patch attached to this message implements an Ldap map class. - Currently we are using this at stanford to support campus-wide - email addressing. This project is discussed at - http://www-leland.stanford.edu/group/networking/project/sunetid.html - - - Currently we are using the ldap map as follows: - - Kluser ldapx - -h"localhost borax.stanford.edu borate.stanford.edu boron.stanford.edu" - -k"mailacceptinggeneralid=%s" -v maildrop - - and in Rule set S5 - - # Now attempt to lookup in luser (ldap map) - R< $L > $+ $: < $L > $( luser $1 $) - R< $* > $+ @ $+ $: < $3 > $2 Rewrite if forward - - - The map definition supports most of the standard Map args plus most - of the command line options of ldapsearch. The software is currently - limited to only accepting the first entry returned. It expects that - the map defines an ldap filter that returns at most 1 valid entry. - It requires the ldap and lber libraries from the Umich Ldap3.2 - release. - - I've tested the software on Solaris.2.4 with gcc and on NeXTStep3.2 - and it runs without problems. If you have any questions, please - send them along. - -TCP Wrappers - If you are using -DTCPWRAPPERS to get TCP Wrappers support you will - also need to install libwrap.a and modify the Makefile to include - -lwrap in the LIBS line (make sure that INCDIRS and LIBDIRS point - to where the tcpd.h and libwrap.a can be found). - - TCP Wrappers is available on ftp.win.tue.nl in /pub/security; - grab tcp_wrappers_<VER>.tar.gz (where <VER> is the highest - numbered version). - - If you have alternate MX sites for your site, be sure that all of - your MX sites reject the same set of hosts. If not, a bad guy whom - you reject will connect to your site, fail, and move on to the next - MX site, which will accept the mail for you and forward it on to you. - - -+--------------+ -| MANUAL PAGES | -+--------------+ - -The manual pages have been written against the -mandoc macros -instead of the -man macros. The latest version of groff has them -included. You can also get a copy from FTP.UU.NET in directory -/systems/unix/bsd-sources/share/tmac. - - -+-----------------+ -| DEBUGGING HOOKS | -+-----------------+ - -As of 8.6.5, sendmail daemons will catch a SIGUSR1 signal and log -some debugging output (logged at LOG_DEBUG severity). The -information dumped is: - - * The value of the $j macro. - * A warning if $j is not in the set $=w. - * A list of the open file descriptors. - * The contents of the connection cache. - * If ruleset 89 is defined, it is evaluated and the results printed. - -This allows you to get information regarding the runtime state of the -daemon on the fly. This should not be done too frequently, since -the process of rewriting may lose memory which will not be recovered. -Also, ruleset 89 may call non-reentrant routines, so there is a small -non-zero probability that this will cause other problems. It is -really only for debugging serious problems. - -A typical formulation of ruleset 89 would be: - - R$* $@ $>0 some test address - - -+-----------------------------+ -| DESCRIPTION OF SOURCE FILES | -+-----------------------------+ - -The following list describes the files in this directory: - -Makefile The makefile used here; this version only works with - the new Berkeley make. -Makefile.dist A trimmed down version of the makefile that works with - the old make. -READ_ME This file. -TRACEFLAGS My own personal list of the trace flags -- not guaranteed - to be particularly up to date. -alias.c Does name aliasing in all forms. -arpadate.c A subroutine which creates ARPANET standard dates. -clock.c Routines to implement real-time oriented functions - in sendmail -- e.g., timeouts. -collect.c The routine that actually reads the mail into a temp - file. It also does a certain amount of parsing of - the header, etc. -conf.c The configuration file. This contains information - that is presumed to be quite static and non- - controversial, or code compiled in for efficiency - reasons. Most of the configuration is in sendmail.cf. -conf.h Configuration that must be known everywhere. -convtime.c A routine to sanely process times. -daemon.c Routines to implement daemon mode. This version is - specifically for Berkeley 4.1 IPC. -deliver.c Routines to deliver mail. -domain.c Routines that interface with DNS (the Domain Name - System). -err.c Routines to print error messages. -envelope.c Routines to manipulate the envelope structure. -headers.c Routines to process message headers. -macro.c The macro expander. This is used internally to - insert information from the configuration file. -main.c The main routine to sendmail. This file also - contains some miscellaneous routines. -map.c Support for database maps. -mci.c Routines that handle mail connection information caching. -mime.c MIME conversion routines. -parseaddr.c The routines which do address parsing. -queue.c Routines to implement message queueing. -readcf.c The routine that reads the configuration file and - translates it to internal form. -recipient.c Routines that manipulate the recipient list. -safefile.c Routines to do careful checking of file modes and permissions - when opening or creating files. -savemail.c Routines which save the letter on processing errors. -sendmail.h Main header file for sendmail. -srvrsmtp.c Routines to implement server SMTP. -stab.c Routines to manage the symbol table. -stats.c Routines to collect and post the statistics. -sysexits.c List of error messages associated with error codes - in sysexits.h. -trace.c The trace package. These routines allow setting and - testing of trace flags with a high granularity. -udb.c The user database interface module. -usersmtp.c Routines to implement user SMTP. -util.c Some general purpose routines used by sendmail. -version.c The version number and information about this - version of sendmail. Theoretically, this gets - modified on every change. - -Eric Allman - -(Version 8.156, last update 10/23/97 12:53:12) |
