diff options
Diffstat (limited to 'usr.sbin/sade/help/partition.hlp')
-rw-r--r-- | usr.sbin/sade/help/partition.hlp | 169 |
1 files changed, 0 insertions, 169 deletions
diff --git a/usr.sbin/sade/help/partition.hlp b/usr.sbin/sade/help/partition.hlp deleted file mode 100644 index 3d13b34..0000000 --- a/usr.sbin/sade/help/partition.hlp +++ /dev/null @@ -1,169 +0,0 @@ -This is the FreeBSD DiskLabel Editor. - -NOTE: If you're entering this editor from the update procedure then -you probably shouldn't (C)reate anything at all but rather use only -the (M)ount command to check and mount existing partitions for -upgrading. - -If you would like the label editor to do most of the following for -you, simply type `A' for automatic partitioning of the disk. - -If you wish to create partitions manually you may do so by moving the -highlighted selection bar with the arrow keys over the FreeBSD -partition(s) displayed at the top of the screen. Typing (C)reate -while a partition with available free space is selected will allow you -to create a BSD partition inside of it using some or all of its -available space. - -Typing (M)ount over an existing partition entry (displayed in the -middle of the screen) will allow you to set a mount point for it -without initializing it. If you want it initialized, use the (T)oggle -command to flip the Newfs flag. When Newfs is set to "Y", the -filesystem in question will be ERASED and rebuilt from scratch! - - -You should use this editor to create at least the following -filesystems: - - Name Purpose Min Size? Optional? - ---- ------- --------- --------- - / Root filesystem 118MB No - swap Swap space 2 * MEM No - /usr System & user files 128MB or more Yes - -Note: If you do not create a /usr filesystem then your / filesystem -will need to be bigger - at least 240MB. This is not recommended as -any media errors that may occur during disk I/O to user files will -corrupt the filesystem containing vital system files as well. It is -for this reason that / is generally kept on its own filesystem, where -it should be considered essentially "read only" in your administration -of it. - -Swap space is a little tricker, and the rule of "2 * MEM" is simply a -best-guess approximation and not necessarily accurate for your -intended usage of the system. If you intend to use the system heavily -in a server or multi-user application, you may be well advised to -increase this size. You may also create swap space on multiple drives -for a larger "total" swap and this is, in fact, recommended if you -have multiple, fast drives for which such load-balancing can only help -overall I/O performance. - -The /usr filesystem should be sized according to what kind of -distributions you're trying to load and how many packages you intend -to install in locations like /usr/local. You can also make /usr/local -a separate filesystem if you don't want to risk filling up your /usr -by mistake. - -Another useful filesystem to create is /var, which contains mail, news -printer spool files and other temporary items. It is a popular -candidate for a separate partition and should be sized according to -your estimates of the amount of mail, news or spooled print jobs that -may be stored there. - -WARNING: If you do not create a separate filesystem for /var, space -for such files will be allocated out of the root (/) filesystem -instead. You may therefore wish to make the / partition bigger if you -expect a lot of mail or news and do not want to make /var its own -partition. - -If you're new to this installation, you might also want to read the -following explanation of how FreeBSD's new "slice" paradigm for -looking at disk storage works: - - -In FreeBSD's new system, a device name can be broken up into up to 3 -parts. Take a typical name like ``/dev/da0s1a'': - - The first three characters represent the drive name. If we had - a system with two SCSI drives on it then we'd see /dev/da0 and - /dev/da1 as the device entries representing the entire drives. - - Next you have the "slice" (or "FDISK Partition") number, - as seen in the Partition Editor. Assuming that our da0 - contained two slices, a FreeBSD slice and a DOS slice, that - would give us /dev/da0s1 and /dev/da0s2 as device entries pointing - to the entire slices. - - Next, if a slice is a FreeBSD slice, you can have a number of - (confusingly named) "partitions" inside of it. - - These partitions are where various filesystems or swap areas live, - and using our hypothetical two-SCSI-disk machine again, we might - have something like the following layout on da0: - - Name Mountpoint - ---- ---------- - da0s1a / - da0s1b <swap space> - da0s1e /usr - -Once you understand all this, then the purpose of the label editor -becomes fairly clear: You're carving up the FreeBSD slices displayed -at the top of the screen into smaller pieces, which are displayed in -the middle of the screen, and then assigning FreeBSD file system names -(mount points) to them. - -You can also use the label editor to mount existing partitions/slices -into your filesystem hierarchy, as is frequently done for DOS FAT -slices. For FreeBSD partitions, you can also toggle the "newfs" state -so that the partitions are either (re)created from scratch or simply -checked and mounted (the contents are preserved). - -If you set (S)oftUpdates on a filesystem, it will cause the -"Soft Updates" policy to be in effect for it. This basically causes -both metadata and data blocks to be written asynchronously to disk, -but with extra state information which causes the metadata and any -related data blocks to be committed in a single transaction. This -results in async metadata update speeds (which are considerably -faster than the default sync) without the potential for data loss -which could occur if you simply mounted the filesystem with purely -"async" update policy and then had a power failure. If you wish -to later turn the softupdates policy back off, use the command -"tunefs -n disable devicename". NOTE: It is probably not wise -to use this on your root filesystem unless you have a large -(e.g. non-standard size) root. The reason is that smaller filesystems -with significant activity can temporarily overflow if the soft updates -policy results in free'd blocks not being "garbage collected" as fast -as they're being requested. - -The UNIX File System (UFS) on FreeBSD supports two different on-disk -layouts: UFS1 and UFS2. UFS1 was the default file system in use -through FreeBSD 5.0-RELEASE; as of FreeBSD 5.1-RELEASE, the default -is now UFS2, with the exception of the PC98 platform. UFS2 provides -sparse inode allocation (faster fsck), 64-bit storage pointers (larger -maximum size), and native extended attributes (required for ACLs, MAC, -and other advanced security and file system services). The selection -of UFS1 or UFS2 must be made when the file system is created--later -conversion is not currently possible. UFS2 is the recommended file -system, but if disks are to be used on older FreeBSD systems, UFS1 -improves portability. When dual-booting between FreeBSD 4.x or -earlier and FreeBSD 5.x, UFS1 file systems will be accessible from -both. To toggle a file system to UFS1, press '1'. To restore it to -UFS2, press '2'. - -WARNING: FreeBSD on i386 is currently unable to boot from root file -systems larger than 1.5TB. - -To add additional flags to the newfs command line for UFS file -systems, press 'N'. These options will be specified before the -device argument of the command line, but after any other options -placed there by sysinstall, such as the UFS version and soft -updates flag; as such, arguments provided may override existing -settings. To completely replace the newfs command used by -sysinstall, press 'Z' to convert a partition to a Custom -partition type. Sysinstall will prompt you with the newfs -command line that it would have used based on existing settings -prior to the change, but allow you to modify any aspect of the -command line. Once a partition has been converted to a custom -partition in the label editor, you will need to restart the -labeling process or delete and recreate the partition to restore -it to a non-custom state. Custom partitions are represented by -the letters "CST" instead of "UFS" or "FAT. - -When you're done, type `Q' to exit. - -No actual changes will be made to the disk until you (C)ommit from the -Install menu or (W)rite directly from this one. You're working with -what is essentially a copy of the disk label(s), both here and in the -FDISK Partition Editor, and the actual on-disk labels won't be -affected by any changes you make until you explicitly say so. |