1 files changed, 107 insertions, 0 deletions
diff --git a/usr.sbin/pim6sd/pim6sd.conf.sample b/usr.sbin/pim6sd/pim6sd.conf.sample
new file mode 100644
index 0000000..21cf8e4
--- /dev/null
+++ b/usr.sbin/pim6sd/pim6sd.conf.sample
@@ -0,0 +1,107 @@
+# $FreeBSD$
+#
+#The timer granularity.
+#More this value is small,more pim6sd will be accurate
+#default if not specified : 5
+#BE SURE to have to same granularity on ALL routers,
+#otherwise....
+
+#granularity 5;
+
+#syntax : phyint <interface> <disable> <metric> [metric] <preference> [preference]
+#metric and pref are for the asserts messages
+#samples :
+
+#phyint ed1 disable;
+#phyint de0 disable;
+#phyint ed0 disable;
+#phyint gif0 disable;
+
+#---------------Protocol timer specifications---------------------------#
+#Notes : theses value are the default spec value!
+#do not touch it if you don't know what you do!!
+#you MUST change theses values according to the granularity value!
+#syntax :  'hello_period <number> <coef>'.
+# number is the period in second between 2 hello messages
+# and coef is the coef to deterimine the hello holdtime=hello_period*coef
+# default if not specified: 30 3.5
+
+#hello_period 30 3.5;
+
+#syntax :  'join_prune_period <number> <coef>'.
+# number is the period in second between 2 join/prune messages
+# and coef is the coef to deterimine the join/prune holdtime=join_prune_period*coef
+# default if not specified : 60 3.5
+
+#join_prune_period 60 3.5;
+
+#syntax :  'data_timeout <number>'.
+# number is the time after which (S,G) state for a silent source will be deleted
+# default if not specified  : 210
+
+#data_timeout 210;
+
+#syntax :  'register_suppression_timeout <number>'.
+# This is the mean interval between receiving a Register-Stop and allowing
+#Register to be send again.
+# default if not specified  : 60
+
+#register_suppression_timeout 60;
+
+#syntax :  'probe_time <number>'.
+#This is the time between sending a null Register and the Register-Suppression-Timer
+#expiring unless it is restarted by receiving a Register-Stop.
+#default if not specified : 5
+
+#probe_time 5;
+
+#syntax :  'assert_timeout <number>'.
+#this is the interval between the last time an Assert is received and the time at wich the
+#assert is timeout
+#default if not specified : 180
+
+#assert_timeout 180;
+
+#syntax : <cand_rp> <interface> <time> [time] <priority> [priority]
+#and time can't be <  10
+#you can just type cand_rp,
+#samples :
+#cand_rp;
+#cand_rp de0;
+#cand_rp ed0 priority 0 time 6;
+
+#syntax : <group_prefix> <multicast address>/<prefix length>
+#group_prefix ff06::15
+#default if not specified : ff00::/8
+#samples:
+#group_prefix ff1e::15/128;
+#group_prefix ff2e::/16;
+
+#syntax : <cand_bootstrap_router> <interface> <priority> [priority] <time> [time]
+#Typically, you can simply set cand_bootstrap_router for a candidate bootstrap
+#router. All other parameters are optional.
+#the bootstrap period is configurable, BUT the holdtime of a bootstrap
+#router is not in the fields of a bootstrap message : it is hardcoded
+#in the pim6sd include file!
+#So be sure to have a time < PIM_BOOSTRAP_TIMEOUT (file pimd.h )
+#cand_bootstrap_router de0 priority 15 time 5;
+
+#syntax : <switch_register_threshold> <rate> [number] <interval> [number]
+#default rate = 50000 interval = 20s
+#samples :
+#TODO : not tested
+#switch_register_threshold rate 54389 interval 45;
+#switch_register_threshold;
+
+#syntax : <switch_data_threshold> <rate> [number] <interval> [number]
+#default rate = 50000 interval = 20s
+#TODO : not tested
+#samples:
+#switch_data_threshold interval 100 rate 1000;
+
+#syntax : <default_source_metric> [number]
+
+#default_source_metric 1243;
+#syntax : <default_source_preference> [number]
+
+#default_source_preference 123 ;