diff options
Diffstat (limited to 'usr.sbin/ntp/doc/ntpdc.8')
-rw-r--r-- | usr.sbin/ntp/doc/ntpdc.8 | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/usr.sbin/ntp/doc/ntpdc.8 b/usr.sbin/ntp/doc/ntpdc.8 index febd02d..bca7479 100644 --- a/usr.sbin/ntp/doc/ntpdc.8 +++ b/usr.sbin/ntp/doc/ntpdc.8 @@ -130,7 +130,7 @@ uniquely identify the command need be typed. The output of a command is normally sent to the standard output, but optionally the output of individual commands may be sent to a file by appending a -.Ql \&; , +.Ql \&> , followed by a file name, to the command line. .Pp A number of interactive format commands are executed entirely @@ -378,7 +378,7 @@ signal. The .Sq stability is the residual frequency error remaining -afterthe system frequency correction is applied and is intended for +after the system frequency correction is applied and is intended for maintenance and debugging. In most architectures, this value will initially decrease from as high as 500 ppm to a nominal value in @@ -391,7 +391,7 @@ may be incorrect. .Pp The -.Ic broadcastdelay +.Sq broadcastdelay shows the default broadcast delay, as set by the .Ic broadcastdelay @@ -425,7 +425,7 @@ Obtain and print traffic counts collected and maintained by the monitor facility. The version number should not normally need to be specified. -.It Ic clkbug clock_peer_address ... +.It Ic clkbug Ar clock_peer_address ... Obtain debugging information for a reference clock driver. This information is provided only by some clock drivers and is mostly @@ -548,8 +548,8 @@ is willing to continue on in this fashion. This command provides a way to set certain data for a reference clock. See the source listing for further information. -.It enable Ar flag ... -.It disable Ar flag ... +.It Ic enable Ar flag ... +.It Ic disable Ar flag ... These commands operate in the same way as the .Ic enable and |