summaryrefslogtreecommitdiffstats
path: root/usr.sbin/i4b/man/daic.4
diff options
context:
space:
mode:
Diffstat (limited to 'usr.sbin/i4b/man/daic.4')
-rw-r--r--usr.sbin/i4b/man/daic.4112
1 files changed, 0 insertions, 112 deletions
diff --git a/usr.sbin/i4b/man/daic.4 b/usr.sbin/i4b/man/daic.4
deleted file mode 100644
index d455022..0000000
--- a/usr.sbin/i4b/man/daic.4
+++ /dev/null
@@ -1,112 +0,0 @@
-.\" Copyright (c) 1997 Martin Husemann <martin@rumolt.teuto.de>
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. The name of the author may not be used to endorse or promote products
-.\" derived from this software withough specific prior written permission
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $Id: daic.4,v 1.2 1999/12/13 22:11:55 hm Exp $
-.\"
-.\" last edit-date: [Tue Dec 14 22:13:53 1999]
-.\"
-.\" $FreeBSD$
-.\"
-.\" -mh writing manual pages
-.\"
-.\"
-.Dd January 30, 1998
-.Dt DAIC 4
-.Os
-.Sh NAME
-.Nm daic
-.Nd isdn4bsd driver for EICON.Diehl active isdn cards
-.Pp
-The
-.Nm
-driver supports the old Diehl active cards:
-.Em S, SX, SXn, SCOM
-and
-.Em QUADRO.
-.Sh SYNOPSIS
-.Pp
-Use a config line like this
-.Cd "daic0 at isa? iomem 0xd8000 irq 10"
-.Pp
-For a
-.Em QUADRO
-card use the same, the driver will detect the board type and use
-all four ports, each attached as a controller of its own to the
-ISDN4BSD system, which can be listed using the isdnctl utility.
-.Sh DESCRIPTION
-The
-.Nm
-driver interfaces the isdn card to the ISDN4BSD kernel subsystem.
-All lower layer isdn control is handled by the card.
-This should
-allow you to run any national isdn protocol delivered by EICON.Diehl
-for your card, but the driver has only been tested with the DSS1
-protocol and some parts of the cards interface are isdn protocol
-dependend.
-.Pp
-The
-.Nm
-driver is written to conform to the software interface documented
-by Diehl in their
-.Nm ISDN-Karten Benutzerhandbuch
-from 1992.
-.Sh MICROCODE DOWNLOAD
-Every active card needs its own operating software before it can
-work.
-You have to download this to the card before using it with
-ISDN4BSD.
-Use the isdnctl utility to do this, i.e. call
-.Nm "isdnctl -d te_etsi.sx 1"
-to download the file
-.Nm te_etsi.sx
-to controller number 1.
-Use
-.Nm "isdnctl -l"
-to list all available controllers (and ports).
-You have to select the
-correct isdn protocol file for your isdn interface, see the Diehl documentation
-for details.
-.Pp
-The cards bootstrap process involves another file, which is independend
-of the card type you use and the protocol you run.
-It is called
-.Nm download.bin
-in current versions of the Diehl software distribution and has to be
-copied to the kernel compile directory under
-.Nm dev/ic/microcode/daic
-and converted into a header file used when compiling the kernel by running
-.Nm make
-in that directory.
-Your kernel compile will fail and remind you of this
-if you forget to do this.
-Due to copright restrictions we cannot distribute
-the driver with this file integrated.
-But if you own a card, you do have
-the file (or can get it from the Diehl web server).
-.Sh BUGS
-The driver is not yet finished.
-It will only compile on NetBSD and
-even there will not work.
-This should be fixed soon and the driver
-will be ported to FreeBSD.
-.Sh SEE ALSO
-.Xr isdnctl 1
OpenPOWER on IntegriCloud