summaryrefslogtreecommitdiffstats
path: root/usr.sbin/bsnmpd/modules/snmp_bridge/BRIDGE-MIB.txt
diff options
context:
space:
mode:
Diffstat (limited to 'usr.sbin/bsnmpd/modules/snmp_bridge/BRIDGE-MIB.txt')
-rw-r--r--usr.sbin/bsnmpd/modules/snmp_bridge/BRIDGE-MIB.txt1483
1 files changed, 1483 insertions, 0 deletions
diff --git a/usr.sbin/bsnmpd/modules/snmp_bridge/BRIDGE-MIB.txt b/usr.sbin/bsnmpd/modules/snmp_bridge/BRIDGE-MIB.txt
new file mode 100644
index 0000000..9f87b65
--- /dev/null
+++ b/usr.sbin/bsnmpd/modules/snmp_bridge/BRIDGE-MIB.txt
@@ -0,0 +1,1483 @@
+--
+-- Copyright (C) The Internet Society (2005).
+--
+-- This document is subject to the rights, licenses and restrictions
+-- contained in BCP 78, and except as set forth therein, the authors
+-- retain all their rights.
+--
+-- This document and the information contained herein are provided on an
+-- "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
+-- OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
+-- ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
+-- INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
+-- INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
+-- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- $FreeBSD$
+--
+
+BRIDGE-MIB DEFINITIONS ::= BEGIN
+
+-- ---------------------------------------------------------- --
+-- MIB for IEEE 802.1D devices
+-- ---------------------------------------------------------- --
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+ Counter32, Integer32, TimeTicks, mib-2
+ FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION, MacAddress
+ FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+ InterfaceIndex FROM IF-MIB
+ ;
+
+dot1dBridge MODULE-IDENTITY
+ LAST-UPDATED "200509190000Z"
+ ORGANIZATION "IETF Bridge MIB Working Group"
+ CONTACT-INFO
+ "Email: bridge-mib@ietf.org
+
+ K.C. Norseth (Editor)
+ L-3 Communications
+ Tel: +1 801-594-2809
+ Email: kenyon.c.norseth@L-3com.com
+ Postal: 640 N. 2200 West.
+ Salt Lake City, Utah 84116-0850
+ Les Bell (Editor)
+ 3Com Europe Limited
+ Phone: +44 1442 438025
+ Email: elbell@ntlworld.com
+ Postal: 3Com Centre, Boundary Way
+ Hemel Hempstead
+ Herts. HP2 7YU
+ UK
+
+ Send comments to <bridge-mib@ietf.org>"
+ DESCRIPTION
+ "The Bridge MIB module for managing devices that support
+ IEEE 802.1D.
+
+ Copyright (C) The Internet Society (2005). This version of
+ this MIB module is part of RFC 4188; see the RFC itself for
+ full legal notices."
+ REVISION "200509190000Z"
+ DESCRIPTION
+ "Third revision, published as part of RFC 4188.
+
+ The MIB module has been converted to SMIv2 format.
+ Conformance statements have been added and some
+ description and reference clauses have been updated.
+
+ The object dot1dStpPortPathCost32 was added to
+ support IEEE 802.1t and the permissible values of
+ dot1dStpPriority and dot1dStpPortPriority have been
+ clarified for bridges supporting IEEE 802.1t or
+ IEEE 802.1w.
+
+ The interpretation of dot1dStpTimeSinceTopologyChange
+ has been clarified for bridges supporting the Rapid
+ Spanning Tree Protocol (RSTP)."
+ REVISION "199307310000Z"
+ DESCRIPTION
+ "Second revision, published as part of RFC 1493."
+ REVISION "199112310000Z"
+ DESCRIPTION
+ "Initial revision, published as part of RFC 1286."
+ ::= { mib-2 17 }
+
+
+-- ---------------------------------------------------------- --
+-- Textual Conventions
+-- ---------------------------------------------------------- --
+
+BridgeId ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The Bridge-Identifier, as used in the Spanning Tree
+ Protocol, to uniquely identify a bridge. Its first two
+ octets (in network byte order) contain a priority value,
+ and its last 6 octets contain the MAC address used to
+ refer to a bridge in a unique fashion (typically, the
+ numerically smallest MAC address of all ports on the
+ bridge)."
+ SYNTAX OCTET STRING (SIZE (8))
+
+Timeout ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "d"
+ STATUS current
+ DESCRIPTION
+ "A Spanning Tree Protocol (STP) timer in units of 1/100
+ seconds. Several objects in this MIB module represent
+ values of timers used by the Spanning Tree Protocol.
+ In this MIB, these timers have values in units of
+ hundredths of a second (i.e., 1/100 secs).
+
+ These timers, when stored in a Spanning Tree Protocol's
+ BPDU, are in units of 1/256 seconds. Note, however, that
+ 802.1D-1998 specifies a settable granularity of no more
+ than one second for these timers. To avoid ambiguity,
+ a conversion algorithm is defined below for converting
+ between the different units, which ensures a timer's
+ value is not distorted by multiple conversions.
+
+ To convert a Timeout value into a value in units of
+ 1/256 seconds, the following algorithm should be used:
+
+ b = floor( (n * 256) / 100)
+
+ where:
+ floor = quotient [ignore remainder]
+ n is the value in 1/100 second units
+ b is the value in 1/256 second units
+
+ To convert the value from 1/256 second units back to
+ 1/100 seconds, the following algorithm should be used:
+
+ n = ceiling( (b * 100) / 256)
+
+ where:
+ ceiling = quotient [if remainder is 0], or
+ quotient + 1 [if remainder is nonzero]
+ n is the value in 1/100 second units
+ b is the value in 1/256 second units
+
+ Note: it is important that the arithmetic operations are
+ done in the order specified (i.e., multiply first,
+ divide second)."
+ SYNTAX Integer32
+
+-- ---------------------------------------------------------- --
+-- subtrees in the Bridge MIB
+-- ---------------------------------------------------------- --
+
+dot1dNotifications OBJECT IDENTIFIER ::= { dot1dBridge 0 }
+
+dot1dBase OBJECT IDENTIFIER ::= { dot1dBridge 1 }
+dot1dStp OBJECT IDENTIFIER ::= { dot1dBridge 2 }
+
+dot1dSr OBJECT IDENTIFIER ::= { dot1dBridge 3 }
+-- documented in RFC 1525
+
+dot1dTp OBJECT IDENTIFIER ::= { dot1dBridge 4 }
+dot1dStatic OBJECT IDENTIFIER ::= { dot1dBridge 5 }
+
+-- Subtrees used by Bridge MIB Extensions:
+-- pBridgeMIB MODULE-IDENTITY ::= { dot1dBridge 6 }
+-- qBridgeMIB MODULE-IDENTITY ::= { dot1dBridge 7 }
+-- Note that the practice of registering related MIB modules
+-- below dot1dBridge has been discouraged since there is no
+-- robust mechanism to track such registrations.
+
+dot1dConformance OBJECT IDENTIFIER ::= { dot1dBridge 8 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dBase subtree
+-- ---------------------------------------------------------- --
+-- Implementation of the dot1dBase subtree is mandatory for all
+-- bridges.
+-- ---------------------------------------------------------- --
+
+dot1dBaseBridgeAddress OBJECT-TYPE
+
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The MAC address used by this bridge when it must be
+ referred to in a unique fashion. It is recommended
+ that this be the numerically smallest MAC address of
+ all ports that belong to this bridge. However, it is only
+ required to be unique. When concatenated with
+ dot1dStpPriority, a unique BridgeIdentifier is formed,
+ which is used in the Spanning Tree Protocol."
+ REFERENCE
+ "IEEE 802.1D-1998: clauses 14.4.1.1.3 and 7.12.5"
+ ::= { dot1dBase 1 }
+
+dot1dBaseNumPorts OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "ports"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of ports controlled by this bridging
+ entity."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 14.4.1.1.3"
+ ::= { dot1dBase 2 }
+
+dot1dBaseType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ transparent-only(2),
+ sourceroute-only(3),
+ srt(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates what type of bridging this bridge can
+ perform. If a bridge is actually performing a
+ certain type of bridging, this will be indicated by
+ entries in the port table for the given type."
+ ::= { dot1dBase 3 }
+
+-- ---------------------------------------------------------- --
+-- The Generic Bridge Port Table
+-- ---------------------------------------------------------- --
+dot1dBasePortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot1dBasePortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains generic information about every
+ port that is associated with this bridge. Transparent,
+ source-route, and srt ports are included."
+ ::= { dot1dBase 4 }
+
+dot1dBasePortEntry OBJECT-TYPE
+ SYNTAX Dot1dBasePortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+
+ DESCRIPTION
+ "A list of information for each port of the bridge."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 14.4.2, 14.6.1"
+ INDEX { dot1dBasePort }
+ ::= { dot1dBasePortTable 1 }
+
+Dot1dBasePortEntry ::=
+ SEQUENCE {
+ dot1dBasePort
+ Integer32,
+ dot1dBasePortIfIndex
+ InterfaceIndex,
+ dot1dBasePortCircuit
+ OBJECT IDENTIFIER,
+ dot1dBasePortDelayExceededDiscards
+ Counter32,
+ dot1dBasePortMtuExceededDiscards
+ Counter32
+ }
+
+dot1dBasePort OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number of the port for which this entry
+ contains bridge management information."
+ ::= { dot1dBasePortEntry 1 }
+
+dot1dBasePortIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the instance of the ifIndex object,
+ defined in IF-MIB, for the interface corresponding
+ to this port."
+ ::= { dot1dBasePortEntry 2 }
+
+dot1dBasePortCircuit OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "For a port that (potentially) has the same value of
+ dot1dBasePortIfIndex as another port on the same bridge.
+ This object contains the name of an object instance
+ unique to this port. For example, in the case where
+ multiple ports correspond one-to-one with multiple X.25
+ virtual circuits, this value might identify an (e.g.,
+ the first) object instance associated with the X.25
+ virtual circuit corresponding to this port.
+
+ For a port which has a unique value of
+ dot1dBasePortIfIndex, this object can have the value
+ { 0 0 }."
+ ::= { dot1dBasePortEntry 3 }
+
+dot1dBasePortDelayExceededDiscards OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of frames discarded by this port due
+ to excessive transit delay through the bridge. It
+ is incremented by both transparent and source
+ route bridges."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 14.6.1.1.3"
+ ::= { dot1dBasePortEntry 4 }
+
+dot1dBasePortMtuExceededDiscards OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of frames discarded by this port due
+ to an excessive size. It is incremented by both
+ transparent and source route bridges."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 14.6.1.1.3"
+ ::= { dot1dBasePortEntry 5 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dStp subtree
+-- ---------------------------------------------------------- --
+-- Implementation of the dot1dStp subtree is optional. It is
+-- implemented by those bridges that support the Spanning Tree
+-- Protocol.
+-- ---------------------------------------------------------- --
+dot1dStpProtocolSpecification OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ decLb100(2),
+ ieee8021d(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An indication of what version of the Spanning Tree
+ Protocol is being run. The value 'decLb100(2)'
+ indicates the DEC LANbridge 100 Spanning Tree protocol.
+ IEEE 802.1D implementations will return 'ieee8021d(3)'.
+ If future versions of the IEEE Spanning Tree Protocol
+ that are incompatible with the current version
+ are released a new value will be defined."
+ ::= { dot1dStp 1 }
+
+dot1dStpPriority OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the write-able portion of the Bridge ID
+ (i.e., the first two octets of the (8 octet long) Bridge
+ ID). The other (last) 6 octets of the Bridge ID are
+ given by the value of dot1dBaseBridgeAddress.
+ On bridges supporting IEEE 802.1t or IEEE 802.1w,
+ permissible values are 0-61440, in steps of 4096."
+ REFERENCE
+ "IEEE 802.1D-1998 clause 8.10.2, Table 8-4,
+ IEEE 802.1t clause 8.10.2, Table 8-4, clause 14.3."
+ ::= { dot1dStp 2 }
+
+dot1dStpTimeSinceTopologyChange OBJECT-TYPE
+ SYNTAX TimeTicks
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time (in hundredths of a second) since the
+ last time a topology change was detected by the
+ bridge entity.
+ For RSTP, this reports the time since the tcWhile
+ timer for any port on this Bridge was nonzero."
+ REFERENCE
+ "IEEE 802.1D-1998 clause 14.8.1.1.,
+ IEEE 802.1w clause 14.8.1.1."
+ ::= { dot1dStp 3 }
+
+dot1dStpTopChanges OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of topology changes detected by
+ this bridge since the management entity was last
+ reset or initialized."
+ REFERENCE
+ "IEEE 802.1D-1998 clause 14.8.1.1."
+ ::= { dot1dStp 4 }
+
+dot1dStpDesignatedRoot OBJECT-TYPE
+ SYNTAX BridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The bridge identifier of the root of the spanning
+ tree, as determined by the Spanning Tree Protocol,
+ as executed by this node. This value is used as
+ the Root Identifier parameter in all Configuration
+ Bridge PDUs originated by this node."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.3.1"
+ ::= { dot1dStp 5 }
+
+dot1dStpRootCost OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The cost of the path to the root as seen from
+ this bridge."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.3.2"
+ ::= { dot1dStp 6 }
+
+dot1dStpRootPort OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number of the port that offers the lowest
+ cost path from this bridge to the root bridge."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.3.3"
+ ::= { dot1dStp 7 }
+
+dot1dStpMaxAge OBJECT-TYPE
+ SYNTAX Timeout
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum age of Spanning Tree Protocol information
+ learned from the network on any port before it is
+ discarded, in units of hundredths of a second. This is
+ the actual value that this bridge is currently using."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.3.4"
+ ::= { dot1dStp 8 }
+
+dot1dStpHelloTime OBJECT-TYPE
+ SYNTAX Timeout
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The amount of time between the transmission of
+ Configuration bridge PDUs by this node on any port when
+ it is the root of the spanning tree, or trying to become
+ so, in units of hundredths of a second. This is the
+ actual value that this bridge is currently using."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.3.5"
+ ::= { dot1dStp 9 }
+
+dot1dStpHoldTime OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This time value determines the interval length
+ during which no more than two Configuration bridge
+ PDUs shall be transmitted by this node, in units
+ of hundredths of a second."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.3.14"
+ ::= { dot1dStp 10 }
+
+dot1dStpForwardDelay OBJECT-TYPE
+ SYNTAX Timeout
+ UNITS "centi-seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This time value, measured in units of hundredths of a
+ second, controls how fast a port changes its spanning
+ state when moving towards the Forwarding state. The
+ value determines how long the port stays in each of the
+ Listening and Learning states, which precede the
+ Forwarding state. This value is also used when a
+ topology change has been detected and is underway, to
+ age all dynamic entries in the Forwarding Database.
+ [Note that this value is the one that this bridge is
+ currently using, in contrast to
+ dot1dStpBridgeForwardDelay, which is the value that this
+ bridge and all others would start using if/when this
+ bridge were to become the root.]"
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.3.6"
+ ::= { dot1dStp 11 }
+
+dot1dStpBridgeMaxAge OBJECT-TYPE
+ SYNTAX Timeout (600..4000)
+ UNITS "centi-seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value that all bridges use for MaxAge when this
+ bridge is acting as the root. Note that 802.1D-1998
+ specifies that the range for this parameter is related
+ to the value of dot1dStpBridgeHelloTime. The
+ granularity of this timer is specified by 802.1D-1998 to
+ be 1 second. An agent may return a badValue error if a
+ set is attempted to a value that is not a whole number
+ of seconds."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.3.8"
+ ::= { dot1dStp 12 }
+
+dot1dStpBridgeHelloTime OBJECT-TYPE
+ SYNTAX Timeout (100..1000)
+ UNITS "centi-seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value that all bridges use for HelloTime when this
+ bridge is acting as the root. The granularity of this
+ timer is specified by 802.1D-1998 to be 1 second. An
+ agent may return a badValue error if a set is attempted
+ to a value that is not a whole number of seconds."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.3.9"
+ ::= { dot1dStp 13 }
+
+dot1dStpBridgeForwardDelay OBJECT-TYPE
+ SYNTAX Timeout (400..3000)
+ UNITS "centi-seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value that all bridges use for ForwardDelay when
+ this bridge is acting as the root. Note that
+ 802.1D-1998 specifies that the range for this parameter
+ is related to the value of dot1dStpBridgeMaxAge. The
+ granularity of this timer is specified by 802.1D-1998 to
+ be 1 second. An agent may return a badValue error if a
+ set is attempted to a value that is not a whole number
+ of seconds."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.3.10"
+ ::= { dot1dStp 14 }
+
+-- ---------------------------------------------------------- --
+-- The Spanning Tree Port Table
+-- ---------------------------------------------------------- --
+
+dot1dStpPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot1dStpPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains port-specific information
+ for the Spanning Tree Protocol."
+ ::= { dot1dStp 15 }
+
+dot1dStpPortEntry OBJECT-TYPE
+ SYNTAX Dot1dStpPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information maintained by every port about
+ the Spanning Tree Protocol state for that port."
+ INDEX { dot1dStpPort }
+ ::= { dot1dStpPortTable 1 }
+
+Dot1dStpPortEntry ::=
+ SEQUENCE {
+ dot1dStpPort
+ Integer32,
+ dot1dStpPortPriority
+ Integer32,
+ dot1dStpPortState
+ INTEGER,
+ dot1dStpPortEnable
+ INTEGER,
+ dot1dStpPortPathCost
+ Integer32,
+ dot1dStpPortDesignatedRoot
+ BridgeId,
+ dot1dStpPortDesignatedCost
+ Integer32,
+ dot1dStpPortDesignatedBridge
+ BridgeId,
+ dot1dStpPortDesignatedPort
+ OCTET STRING,
+ dot1dStpPortForwardTransitions
+ Counter32,
+ dot1dStpPortPathCost32
+ Integer32
+ }
+
+dot1dStpPort OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number of the port for which this entry
+ contains Spanning Tree Protocol management information."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 14.8.2.1.2"
+ ::= { dot1dStpPortEntry 1 }
+
+dot1dStpPortPriority OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The value of the priority field that is contained in
+ the first (in network byte order) octet of the (2 octet
+ long) Port ID. The other octet of the Port ID is given
+ by the value of dot1dStpPort.
+ On bridges supporting IEEE 802.1t or IEEE 802.1w,
+ permissible values are 0-240, in steps of 16."
+ REFERENCE
+ "IEEE 802.1D-1998 clause 8.10.2, Table 8-4,
+ IEEE 802.1t clause 8.10.2, Table 8-4, clause 14.3."
+ ::= { dot1dStpPortEntry 2 }
+
+dot1dStpPortState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ blocking(2),
+ listening(3),
+ learning(4),
+ forwarding(5),
+ broken(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port's current state, as defined by application of
+ the Spanning Tree Protocol. This state controls what
+ action a port takes on reception of a frame. If the
+ bridge has detected a port that is malfunctioning, it
+ will place that port into the broken(6) state. For
+ ports that are disabled (see dot1dStpPortEnable), this
+ object will have a value of disabled(1)."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.5.2"
+ ::= { dot1dStpPortEntry 3 }
+
+dot1dStpPortEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The enabled/disabled status of the port."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.5.2"
+ ::= { dot1dStpPortEntry 4 }
+
+dot1dStpPortPathCost OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The contribution of this port to the path cost of
+ paths towards the spanning tree root which include
+ this port. 802.1D-1998 recommends that the default
+ value of this parameter be in inverse proportion to
+ the speed of the attached LAN.
+
+ New implementations should support dot1dStpPortPathCost32.
+ If the port path costs exceeds the maximum value of this
+ object then this object should report the maximum value,
+ namely 65535. Applications should try to read the
+ dot1dStpPortPathCost32 object if this object reports
+ the maximum value."
+ REFERENCE "IEEE 802.1D-1998: clause 8.5.5.3"
+ ::= { dot1dStpPortEntry 5 }
+
+dot1dStpPortDesignatedRoot OBJECT-TYPE
+ SYNTAX BridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The unique Bridge Identifier of the Bridge
+ recorded as the Root in the Configuration BPDUs
+ transmitted by the Designated Bridge for the
+ segment to which the port is attached."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.5.4"
+ ::= { dot1dStpPortEntry 6 }
+
+dot1dStpPortDesignatedCost OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The path cost of the Designated Port of the segment
+ connected to this port. This value is compared to the
+ Root Path Cost field in received bridge PDUs."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.5.5"
+ ::= { dot1dStpPortEntry 7 }
+
+dot1dStpPortDesignatedBridge OBJECT-TYPE
+ SYNTAX BridgeId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Bridge Identifier of the bridge that this
+ port considers to be the Designated Bridge for
+ this port's segment."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.5.6"
+ ::= { dot1dStpPortEntry 8 }
+
+dot1dStpPortDesignatedPort OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (2))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Port Identifier of the port on the Designated
+ Bridge for this port's segment."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 8.5.5.7"
+ ::= { dot1dStpPortEntry 9 }
+
+dot1dStpPortForwardTransitions OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this port has transitioned
+ from the Learning state to the Forwarding state."
+ ::= { dot1dStpPortEntry 10 }
+
+dot1dStpPortPathCost32 OBJECT-TYPE
+ SYNTAX Integer32 (1..200000000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The contribution of this port to the path cost of
+ paths towards the spanning tree root which include
+ this port. 802.1D-1998 recommends that the default
+ value of this parameter be in inverse proportion to
+ the speed of the attached LAN.
+
+ This object replaces dot1dStpPortPathCost to support
+ IEEE 802.1t."
+ REFERENCE
+ "IEEE 802.1t clause 8.10.2, Table 8-5."
+ ::= { dot1dStpPortEntry 11 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dTp subtree
+-- ---------------------------------------------------------- --
+-- Implementation of the dot1dTp subtree is optional. It is
+-- implemented by those bridges that support the transparent
+-- bridging mode. A transparent or SRT bridge will implement
+-- this subtree.
+-- ---------------------------------------------------------- --
+
+dot1dTpLearnedEntryDiscards OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of Forwarding Database entries that
+ have been or would have been learned, but have been
+ discarded due to a lack of storage space in the
+ Forwarding Database. If this counter is increasing, it
+ indicates that the Forwarding Database is regularly
+ becoming full (a condition that has unpleasant
+ performance effects on the subnetwork). If this counter
+ has a significant value but is not presently increasing,
+ it indicates that the problem has been occurring but is
+ not persistent."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 14.7.1.1.3"
+ ::= { dot1dTp 1 }
+
+dot1dTpAgingTime OBJECT-TYPE
+ SYNTAX Integer32 (10..1000000)
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The timeout period in seconds for aging out
+ dynamically-learned forwarding information.
+ 802.1D-1998 recommends a default of 300 seconds."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 14.7.1.1.3"
+ ::= { dot1dTp 2 }
+
+
+-- ---------------------------------------------------------- --
+-- The Forwarding Database for Transparent Bridges
+-- ---------------------------------------------------------- --
+
+dot1dTpFdbTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot1dTpFdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains information about unicast
+ entries for which the bridge has forwarding and/or
+ filtering information. This information is used
+ by the transparent bridging function in
+ determining how to propagate a received frame."
+ ::= { dot1dTp 3 }
+
+dot1dTpFdbEntry OBJECT-TYPE
+ SYNTAX Dot1dTpFdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a specific unicast MAC address
+ for which the bridge has some forwarding and/or
+ filtering information."
+ INDEX { dot1dTpFdbAddress }
+ ::= { dot1dTpFdbTable 1 }
+
+Dot1dTpFdbEntry ::=
+ SEQUENCE {
+ dot1dTpFdbAddress
+ MacAddress,
+ dot1dTpFdbPort
+ Integer32,
+ dot1dTpFdbStatus
+ INTEGER
+ }
+
+dot1dTpFdbAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unicast MAC address for which the bridge has
+ forwarding and/or filtering information."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 7.9.1, 7.9.2"
+ ::= { dot1dTpFdbEntry 1 }
+
+dot1dTpFdbPort OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Either the value '0', or the port number of the port on
+ which a frame having a source address equal to the value
+ of the corresponding instance of dot1dTpFdbAddress has
+ been seen. A value of '0' indicates that the port
+ number has not been learned, but that the bridge does
+ have some forwarding/filtering information about this
+ address (e.g., in the dot1dStaticTable). Implementors
+ are encouraged to assign the port value to this object
+ whenever it is learned, even for addresses for which the
+ corresponding value of dot1dTpFdbStatus is not
+ learned(3)."
+ ::= { dot1dTpFdbEntry 2 }
+dot1dTpFdbStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ invalid(2),
+ learned(3),
+ self(4),
+ mgmt(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of this entry. The meanings of the
+ values are:
+ other(1) - none of the following. This would
+ include the case where some other MIB object
+ (not the corresponding instance of
+ dot1dTpFdbPort, nor an entry in the
+ dot1dStaticTable) is being used to determine if
+ and how frames addressed to the value of the
+ corresponding instance of dot1dTpFdbAddress are
+ being forwarded.
+ invalid(2) - this entry is no longer valid (e.g.,
+ it was learned but has since aged out), but has
+ not yet been flushed from the table.
+ learned(3) - the value of the corresponding instance
+ of dot1dTpFdbPort was learned, and is being
+ used.
+ self(4) - the value of the corresponding instance of
+ dot1dTpFdbAddress represents one of the bridge's
+ addresses. The corresponding instance of
+ dot1dTpFdbPort indicates which of the bridge's
+ ports has this address.
+ mgmt(5) - the value of the corresponding instance of
+ dot1dTpFdbAddress is also the value of an
+ existing instance of dot1dStaticAddress."
+ ::= { dot1dTpFdbEntry 3 }
+
+-- ---------------------------------------------------------- --
+-- Port Table for Transparent Bridges
+-- ---------------------------------------------------------- --
+
+dot1dTpPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot1dTpPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains information about every port that
+ is associated with this transparent bridge."
+ ::= { dot1dTp 4 }
+
+dot1dTpPortEntry OBJECT-TYPE
+ SYNTAX Dot1dTpPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information for each port of a transparent
+ bridge."
+ INDEX { dot1dTpPort }
+ ::= { dot1dTpPortTable 1 }
+
+Dot1dTpPortEntry ::=
+ SEQUENCE {
+ dot1dTpPort
+ Integer32,
+ dot1dTpPortMaxInfo
+ Integer32,
+ dot1dTpPortInFrames
+ Counter32,
+ dot1dTpPortOutFrames
+ Counter32,
+ dot1dTpPortInDiscards
+ Counter32
+ }
+
+dot1dTpPort OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number of the port for which this entry
+ contains Transparent bridging management information."
+ ::= { dot1dTpPortEntry 1 }
+
+-- It would be nice if we could use ifMtu as the size of the
+-- largest INFO field, but we can't because ifMtu is defined
+-- to be the size that the (inter-)network layer can use, which
+-- can differ from the MAC layer (especially if several layers
+-- of encapsulation are used).
+
+dot1dTpPortMaxInfo OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum size of the INFO (non-MAC) field that
+ this port will receive or transmit."
+ ::= { dot1dTpPortEntry 2 }
+
+dot1dTpPortInFrames OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of frames that have been received by this
+ port from its segment. Note that a frame received on the
+ interface corresponding to this port is only counted by
+ this object if and only if it is for a protocol being
+ processed by the local bridging function, including
+ bridge management frames."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 14.6.1.1.3"
+ ::= { dot1dTpPortEntry 3 }
+
+dot1dTpPortOutFrames OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of frames that have been transmitted by this
+ port to its segment. Note that a frame transmitted on
+ the interface corresponding to this port is only counted
+ by this object if and only if it is for a protocol being
+ processed by the local bridging function, including
+ bridge management frames."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 14.6.1.1.3"
+ ::= { dot1dTpPortEntry 4 }
+
+dot1dTpPortInDiscards OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Count of received valid frames that were discarded
+ (i.e., filtered) by the Forwarding Process."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 14.6.1.1.3"
+ ::= { dot1dTpPortEntry 5 }
+
+-- ---------------------------------------------------------- --
+-- The Static (Destination-Address Filtering) Database
+-- ---------------------------------------------------------- --
+-- Implementation of this subtree is optional.
+-- ---------------------------------------------------------- --
+
+dot1dStaticTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot1dStaticEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing filtering information configured
+ into the bridge by (local or network) management
+ specifying the set of ports to which frames received
+ from specific ports and containing specific destination
+ addresses are allowed to be forwarded. The value of
+ zero in this table, as the port number from which frames
+ with a specific destination address are received, is
+ used to specify all ports for which there is no specific
+ entry in this table for that particular destination
+ address. Entries are valid for unicast and for
+ group/broadcast addresses."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 14.7.2"
+ ::= { dot1dStatic 1 }
+
+dot1dStaticEntry OBJECT-TYPE
+ SYNTAX Dot1dStaticEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Filtering information configured into the bridge by
+ (local or network) management specifying the set of
+ ports to which frames received from a specific port and
+ containing a specific destination address are allowed to
+ be forwarded."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 14.7.2"
+ INDEX { dot1dStaticAddress, dot1dStaticReceivePort }
+ ::= { dot1dStaticTable 1 }
+
+Dot1dStaticEntry ::=
+ SEQUENCE {
+ dot1dStaticAddress MacAddress,
+ dot1dStaticReceivePort Integer32,
+ dot1dStaticAllowedToGoTo OCTET STRING,
+ dot1dStaticStatus INTEGER
+ }
+
+dot1dStaticAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The destination MAC address in a frame to which this
+ entry's filtering information applies. This object can
+ take the value of a unicast address, a group address, or
+ the broadcast address."
+ REFERENCE
+ "IEEE 802.1D-1998: clause 7.9.1, 7.9.2"
+ ::= { dot1dStaticEntry 1 }
+
+dot1dStaticReceivePort OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Either the value '0', or the port number of the port
+ from which a frame must be received in order for this
+ entry's filtering information to apply. A value of zero
+ indicates that this entry applies on all ports of the
+ bridge for which there is no other applicable entry."
+ ::= { dot1dStaticEntry 2 }
+
+dot1dStaticAllowedToGoTo OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..512))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The set of ports to which frames received from a
+ specific port and destined for a specific MAC address,
+ are allowed to be forwarded. Each octet within the
+ value of this object specifies a set of eight ports,
+ with the first octet specifying ports 1 through 8, the
+ second octet specifying ports 9 through 16, etc. Within
+ each octet, the most significant bit represents the
+ lowest numbered port, and the least significant bit
+ represents the highest numbered port. Thus, each port
+ of the bridge is represented by a single bit within the
+ value of this object. If that bit has a value of '1',
+ then that port is included in the set of ports; the port
+ is not included if its bit has a value of '0'. (Note
+ that the setting of the bit corresponding to the port
+ from which a frame is received is irrelevant.) The
+ default value of this object is a string of ones of
+ appropriate length.
+
+ The value of this object may exceed the required minimum
+ maximum message size of some SNMP transport (484 bytes,
+ in the case of SNMP over UDP, see RFC 3417, section 3.2).
+ SNMP engines on bridges supporting a large number of
+ ports must support appropriate maximum message sizes."
+ ::= { dot1dStaticEntry 3 }
+
+dot1dStaticStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ invalid(2),
+ permanent(3),
+ deleteOnReset(4),
+ deleteOnTimeout(5)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry.
+ The default value is permanent(3).
+ other(1) - this entry is currently in use but the
+ conditions under which it will remain so are
+ different from each of the following values.
+ invalid(2) - writing this value to the object
+ removes the corresponding entry.
+ permanent(3) - this entry is currently in use and
+ will remain so after the next reset of the
+ bridge.
+ deleteOnReset(4) - this entry is currently in use
+ and will remain so until the next reset of the
+ bridge.
+ deleteOnTimeout(5) - this entry is currently in use
+ and will remain so until it is aged out."
+ ::= { dot1dStaticEntry 4 }
+
+-- ---------------------------------------------------------- --
+-- Notifications for use by Bridges
+-- ---------------------------------------------------------- --
+-- Notifications for the Spanning Tree Protocol
+-- ---------------------------------------------------------- --
+
+newRoot NOTIFICATION-TYPE
+ -- OBJECTS { }
+ STATUS current
+ DESCRIPTION
+ "The newRoot trap indicates that the sending agent has
+ become the new root of the Spanning Tree; the trap is
+ sent by a bridge soon after its election as the new
+ root, e.g., upon expiration of the Topology Change Timer,
+ immediately subsequent to its election. Implementation
+ of this trap is optional."
+ ::= { dot1dNotifications 1 }
+
+topologyChange NOTIFICATION-TYPE
+ -- OBJECTS { }
+ STATUS current
+ DESCRIPTION
+ "A topologyChange trap is sent by a bridge when any of
+ its configured ports transitions from the Learning state
+ to the Forwarding state, or from the Forwarding state to
+ the Blocking state. The trap is not sent if a newRoot
+ trap is sent for the same transition. Implementation of
+ this trap is optional."
+ ::= { dot1dNotifications 2 }
+
+-- ---------------------------------------------------------- --
+-- IEEE 802.1D MIB - Conformance Information
+-- ---------------------------------------------------------- --
+
+dot1dGroups OBJECT IDENTIFIER ::= { dot1dConformance 1 }
+dot1dCompliances OBJECT IDENTIFIER ::= { dot1dConformance 2 }
+
+-- ---------------------------------------------------------- --
+-- units of conformance
+-- ---------------------------------------------------------- --
+
+-- ---------------------------------------------------------- --
+-- the dot1dBase group
+-- ---------------------------------------------------------- --
+
+dot1dBaseBridgeGroup OBJECT-GROUP
+ OBJECTS {
+ dot1dBaseBridgeAddress,
+ dot1dBaseNumPorts,
+ dot1dBaseType
+ }
+ STATUS current
+ DESCRIPTION
+ "Bridge level information for this device."
+ ::= { dot1dGroups 1 }
+
+dot1dBasePortGroup OBJECT-GROUP
+ OBJECTS {
+ dot1dBasePort,
+ dot1dBasePortIfIndex,
+ dot1dBasePortCircuit,
+ dot1dBasePortDelayExceededDiscards,
+ dot1dBasePortMtuExceededDiscards
+ }
+ STATUS current
+ DESCRIPTION
+ "Information for each port on this device."
+ ::= { dot1dGroups 2 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dStp group
+-- ---------------------------------------------------------- --
+
+dot1dStpBridgeGroup OBJECT-GROUP
+ OBJECTS {
+ dot1dStpProtocolSpecification,
+ dot1dStpPriority,
+ dot1dStpTimeSinceTopologyChange,
+ dot1dStpTopChanges,
+ dot1dStpDesignatedRoot,
+ dot1dStpRootCost,
+ dot1dStpRootPort,
+ dot1dStpMaxAge,
+ dot1dStpHelloTime,
+ dot1dStpHoldTime,
+ dot1dStpForwardDelay,
+ dot1dStpBridgeMaxAge,
+ dot1dStpBridgeHelloTime,
+ dot1dStpBridgeForwardDelay
+ }
+ STATUS current
+ DESCRIPTION
+ "Bridge level Spanning Tree data for this device."
+ ::= { dot1dGroups 3 }
+
+dot1dStpPortGroup OBJECT-GROUP
+ OBJECTS {
+ dot1dStpPort,
+ dot1dStpPortPriority,
+ dot1dStpPortState,
+ dot1dStpPortEnable,
+ dot1dStpPortPathCost,
+ dot1dStpPortDesignatedRoot,
+ dot1dStpPortDesignatedCost,
+ dot1dStpPortDesignatedBridge,
+ dot1dStpPortDesignatedPort,
+ dot1dStpPortForwardTransitions
+ }
+ STATUS current
+ DESCRIPTION
+ "Spanning Tree data for each port on this device."
+ ::= { dot1dGroups 4 }
+
+dot1dStpPortGroup2 OBJECT-GROUP
+ OBJECTS {
+ dot1dStpPort,
+ dot1dStpPortPriority,
+ dot1dStpPortState,
+ dot1dStpPortEnable,
+ dot1dStpPortDesignatedRoot,
+ dot1dStpPortDesignatedCost,
+ dot1dStpPortDesignatedBridge,
+ dot1dStpPortDesignatedPort,
+ dot1dStpPortForwardTransitions,
+ dot1dStpPortPathCost32
+ }
+ STATUS current
+ DESCRIPTION
+ "Spanning Tree data for each port on this device."
+ ::= { dot1dGroups 5 }
+
+dot1dStpPortGroup3 OBJECT-GROUP
+ OBJECTS {
+ dot1dStpPortPathCost32
+ }
+ STATUS current
+ DESCRIPTION
+ "Spanning Tree data for devices supporting 32-bit
+ path costs."
+ ::= { dot1dGroups 6 }
+
+-- ---------------------------------------------------------- --
+-- the dot1dTp group
+-- ---------------------------------------------------------- --
+
+dot1dTpBridgeGroup OBJECT-GROUP
+ OBJECTS {
+ dot1dTpLearnedEntryDiscards,
+ dot1dTpAgingTime
+ }
+ STATUS current
+ DESCRIPTION
+ "Bridge level Transparent Bridging data."
+ ::= { dot1dGroups 7 }
+
+dot1dTpFdbGroup OBJECT-GROUP
+ OBJECTS {
+ dot1dTpFdbAddress,
+ dot1dTpFdbPort,
+ dot1dTpFdbStatus
+ }
+
+ STATUS current
+ DESCRIPTION
+ "Filtering Database information for the Bridge."
+ ::= { dot1dGroups 8 }
+
+dot1dTpGroup OBJECT-GROUP
+ OBJECTS {
+ dot1dTpPort,
+ dot1dTpPortMaxInfo,
+ dot1dTpPortInFrames,
+ dot1dTpPortOutFrames,
+ dot1dTpPortInDiscards
+ }
+ STATUS current
+ DESCRIPTION
+ "Dynamic Filtering Database information for each port of
+ the Bridge."
+ ::= { dot1dGroups 9 }
+
+-- ---------------------------------------------------------- --
+-- The Static (Destination-Address Filtering) Database
+-- ---------------------------------------------------------- --
+
+dot1dStaticGroup OBJECT-GROUP
+ OBJECTS {
+ dot1dStaticAddress,
+ dot1dStaticReceivePort,
+ dot1dStaticAllowedToGoTo,
+ dot1dStaticStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "Static Filtering Database information for each port of
+ the Bridge."
+ ::= { dot1dGroups 10 }
+
+-- ---------------------------------------------------------- --
+-- The Trap Notification Group
+-- ---------------------------------------------------------- --
+
+dot1dNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS {
+ newRoot,
+ topologyChange
+ }
+ STATUS current
+ DESCRIPTION
+ "Group of objects describing notifications (traps)."
+ ::= { dot1dGroups 11 }
+
+-- ---------------------------------------------------------- --
+-- compliance statements
+-- ---------------------------------------------------------- --
+
+bridgeCompliance1493 MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for device support of bridging
+ services, as per RFC1493."
+
+ MODULE
+ MANDATORY-GROUPS {
+ dot1dBaseBridgeGroup,
+ dot1dBasePortGroup
+ }
+
+ GROUP dot1dStpBridgeGroup
+ DESCRIPTION
+ "Implementation of this group is mandatory for bridges
+ that support the Spanning Tree Protocol."
+
+ GROUP dot1dStpPortGroup
+ DESCRIPTION
+ "Implementation of this group is mandatory for bridges
+ that support the Spanning Tree Protocol."
+
+ GROUP dot1dTpBridgeGroup
+ DESCRIPTION
+ "Implementation of this group is mandatory for bridges
+ that support the transparent bridging mode. A
+ transparent or SRT bridge will implement this group."
+
+ GROUP dot1dTpFdbGroup
+ DESCRIPTION
+ "Implementation of this group is mandatory for bridges
+ that support the transparent bridging mode. A
+ transparent or SRT bridge will implement this group."
+
+ GROUP dot1dTpGroup
+ DESCRIPTION
+ "Implementation of this group is mandatory for bridges
+ that support the transparent bridging mode. A
+ transparent or SRT bridge will implement this group."
+
+ GROUP dot1dStaticGroup
+ DESCRIPTION
+ "Implementation of this group is optional."
+
+ GROUP dot1dNotificationGroup
+ DESCRIPTION
+ "Implementation of this group is optional."
+ ::= { dot1dCompliances 1 }
+
+bridgeCompliance4188 MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for device support of bridging
+ services. This supports 32-bit Path Cost values and the
+ more restricted bridge and port priorities, as per IEEE
+ 802.1t.
+
+ Full support for the 802.1D management objects requires that
+ the SNMPv2-MIB [RFC3418] objects sysDescr, and sysUpTime, as
+ well as the IF-MIB [RFC2863] objects ifIndex, ifType,
+ ifDescr, ifPhysAddress, and ifLastChange are implemented."
+
+ MODULE
+ MANDATORY-GROUPS {
+ dot1dBaseBridgeGroup,
+ dot1dBasePortGroup
+ }
+
+ GROUP dot1dStpBridgeGroup
+ DESCRIPTION
+ "Implementation of this group is mandatory for
+ bridges that support the Spanning Tree Protocol."
+
+ OBJECT dot1dStpPriority
+ SYNTAX Integer32 (0|4096|8192|12288|16384|20480|24576
+ |28672|32768|36864|40960|45056|49152
+ |53248|57344|61440)
+ DESCRIPTION
+ "The possible values defined by IEEE 802.1t."
+
+ GROUP dot1dStpPortGroup2
+ DESCRIPTION
+ "Implementation of this group is mandatory for
+ bridges that support the Spanning Tree Protocol."
+
+ GROUP dot1dStpPortGroup3
+ DESCRIPTION
+ "Implementation of this group is mandatory for bridges
+ that support the Spanning Tree Protocol and 32-bit path
+ costs. In particular, this includes devices supporting
+ IEEE 802.1t and IEEE 802.1w."
+
+ OBJECT dot1dStpPortPriority
+ SYNTAX Integer32 (0|16|32|48|64|80|96|112|128
+ |144|160|176|192|208|224|240)
+ DESCRIPTION
+ "The possible values defined by IEEE 802.1t."
+
+ GROUP dot1dTpBridgeGroup
+ DESCRIPTION
+ "Implementation of this group is mandatory for
+ bridges that support the transparent bridging
+ mode. A transparent or SRT bridge will implement
+ this group."
+
+ GROUP dot1dTpFdbGroup
+ DESCRIPTION
+ "Implementation of this group is mandatory for
+ bridges that support the transparent bridging
+ mode. A transparent or SRT bridge will implement
+ this group."
+
+ GROUP dot1dTpGroup
+ DESCRIPTION
+ "Implementation of this group is mandatory for
+ bridges that support the transparent bridging
+ mode. A transparent or SRT bridge will implement
+ this group."
+
+ GROUP dot1dStaticGroup
+ DESCRIPTION
+ "Implementation of this group is optional."
+
+ GROUP dot1dNotificationGroup
+ DESCRIPTION
+ "Implementation of this group is optional."
+
+ ::= { dot1dCompliances 2 }
+
+END
OpenPOWER on IntegriCloud