diff options
Diffstat (limited to 'usr.sbin/bluetooth/rfcomm_pppd/rfcomm_pppd.8')
| -rw-r--r-- | usr.sbin/bluetooth/rfcomm_pppd/rfcomm_pppd.8 | 354 |
1 files changed, 354 insertions, 0 deletions
diff --git a/usr.sbin/bluetooth/rfcomm_pppd/rfcomm_pppd.8 b/usr.sbin/bluetooth/rfcomm_pppd/rfcomm_pppd.8 new file mode 100644 index 0000000..0588d0c --- /dev/null +++ b/usr.sbin/bluetooth/rfcomm_pppd/rfcomm_pppd.8 @@ -0,0 +1,354 @@ +.\" Copyright (c) 2001-2003 Maksim Yevmenkin <m_evmenkin@yahoo.com> +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $Id: rfcomm_pppd.8,v 1.7 2003/09/07 18:32:11 max Exp $ +.\" $FreeBSD$ +.\" +.Dd February 4, 2003 +.Dt RFCOMM_PPPD 8 +.Os +.Sh NAME +.Nm rfcomm_pppd +.Nd RFCOMM PPP daemon +.Sh SYNOPSIS +.Nm +.Fl c +.Op Fl dh +.Fl a Ar address +.Fl C Ar channel +.Fl l Ar label +.Fl u Ar N +.Nm +.Fl s +.Op Fl dDhS +.Op Fl a Ar address +.Fl C Ar channel +.Fl l Ar label +.Sh DESCRIPTION +The +.Nm +daemon is a simple wrapper daemon that allows the use of +.Xr ppp 8 +via an RFCOMM connection. +It can operate in two modes: client and server. +.Pp +In client mode, +.Nm +opens an RFCOMM connection to the specified server's +.Ar BD_ADRR +and +.Ar channel . +Once the RFCOMM connection is established, +.Nm +executes +.Xr ppp 8 +in +.Fl direct +mode with the specified +.Ar label . +Likewise, +.Xr ppp 8 +operates over the RFCOMM connection just like it would over a standard serial +port, thus allowing a user to +.Dq "dial out" +and connect to the Internet. +.Pp +In server mode, +.Nm +opens an RFCOMM socket and listens for incoming connections from remote clients. +Once the new incoming connection is accepted, +.Nm +forks and executes +.Xr ppp 8 +in +.Fl direct +mode with the specified +.Ar label . +Likewise, +.Xr ppp 8 +operates over the RFCOMM connection just like it would over a standard serial +port, thus providing network connectivity to remote clients. +.Pp +The options are as follows: +.Bl -tag -width indent +.It Fl a Ar address +In client mode, this required option specifies the address of the remote +RFCOMM server. +In server mode, this option can be used to specify the local +address to listen on. +By default, in server mode, the daemon will listen on +.Dv ANY +address. +The address can be specified as BD_ADDR or name. +If a name was specified, the +.Nm +utility will attempt to resolve the name via +.Xr bt_gethostbyname 3 . +.It Fl C Ar channel +In both client and server mode, this required option specifies the RFCOMM +channel to connect to or listen on. +In server mode, the channel should be a number between 1 and 30. +In client mode, the channel could either be a number between 1 and 30 +or a service name. +Supported service names are: +.Cm DUN +(Dial-Up Networking) and +.Cm LAN +(LAN Access Using PPP). +If a service name is used instead of a numeric channel number, then +.Nm +will try to obtain an RFCOMM channel number via SDP +(Service Discovery Protocol). +.It Fl c +Act as an RFCOMM client. +This is the default mode. +.It Fl d +Do not detach from the controlling terminal, i.e., run in foreground. +.It Fl D +In server mode, register the +.Cm DUN +(Dial-Up Networking) service in addition to the +.Cm LAN +(LAN Access Using PPP) service. +AT-command exchange can be faked with +.Xr ppp 8 +chat script. +.It Fl h +Display usage message and exit. +.It Fl l Ar label +In both client and server mode, this required option specifies which +.Xr ppp 8 +label will be used. +.It Fl S +In server mode, register the +.Cm SP +(Serial Port) service in addition to the +.Cm LAN +(LAN Access Using PPP) service. +.Pp +It appears that some cell phones are using the so-called +.Dq "callback mechanism" . +In this scenario, the user is trying to connect his cell phone to the Internet, +while the user's host computer is acting as the gateway server. +It seems that it is not possible to tell the phone to just connect and start +using the +.Cm LAN +service. +Instead, the user's host computer must +.Dq "jump start" +the phone by connecting to the phone's +.Cm SP +service. +What happens next is the phone kills the existing connection and opens another +connection back to the user's host computer. +The phone really wants to use the +.Cm LAN +service, but for whatever reason it looks for the +.Cm SP +service on the user's host computer. +This brain-damaged behavior was reported for the Nokia 6600 and the +Sony/Ericsson P900. +.It Fl s +Act as an RFCOMM server. +.It Fl u Ar N +This option maps directly to the +.Fl unit +.Xr ppp 8 +command-line option and tells +.Nm +to instruct +.Xr ppp 8 +to only attempt to open +.Pa /dev/tun Ns Ar N . +This option only works in client mode. +.El +.Sh PPP CONFIGURATION +.Ss Important Notes on PPP Configuration +Special attention is required when adding new RFCOMM configurations to the +existing PPP configuration. +Please keep in mind that PPP will +.Em always +execute commands in the +.Dq Li default +label of your +.Pa /etc/ppp/ppp.conf +file. +Please make sure that the +.Dq Li default +label +.Em only +contains commands that apply to +.Em every +other label. +If you need to use PPP for both dialing out and accepting incoming +RFCOMM connections, please make sure you have moved all commands related to +dialing out from the +.Dq Li default +section into an appropriate outgoing label. +.Ss RFCOMM Server +One of the typical examples is the LAN access. +In this example, an RFCOMM connection +is used as a null-modem connection between a client and a server. +Both client and server will start talking PPP right after the RFCOMM +connection has been established. +.Bd -literal -offset indent +rfcomm-server: + set timeout 0 + set lqrperiod 10 + set ifaddr 10.0.0.1 10.0.0.2 255.255.255.0 + enable lqr + accept lqr + accept dns + # Do not use PPP authentication. Assume that + # Bluetooth connection was authenticated already + disable pap + deny pap + disable chap + deny chap +.Ed +.Ss RFCOMM Client +The +.Nm +utility supports both +.Cm LAN +(LAN Access Using PPP) and +.Cm DUN +(Dial-Up Networking) access. +The client's configuration for +.Cm LAN +access is very similar to the server's and might look like this: +.Bd -literal -offset indent +rfcomm-client: + enable lqr + accept lqr + set dial + set timeout 0 + disable iface-alias + set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 + # Do not use PPP authentication. Assume that + # Bluetooth connection was authenticated already + deny pap + disable pap + deny chap + disable chap +.Ed +.Pp +The client's configuration for +.Cm DUN +access is different. +In this scenario, the client gets connected to the virtual serial port on the +server. +To open a PPP session, the client must dial a number. +Note that by default +.Xr ppp 8 +will not execute any configured chat scripts. +The +.Ic force-scripts +option can be used to override this behavior. +An example configuration is shown below: +.Bd -literal -offset indent +rfcomm-dialup: + # This is IMPORTANT option + enable force-scripts + + # You might want to change these + set authname + set authkey + set phone "*99***1#" + + # You might want to adjust dial string as well + set dial "ABORT BUSY ABORT NO\\\\sCARRIER TIMEOUT 5 \\ + \\"\\" AT OK-AT-OK ATE1Q0 OK \\\\dATDT\\\\T TIMEOUT 40 CONNECT" + set login + set timeout 30 + enable dns + resolv rewrite + + set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 + add default HISADDR +.Ed +.Pp +Note that by adjusting the initialization string, one can make a CSD (Circuit +Switched Data), HSCSD (High Speed Circuit Switched Data) or GPRS (General +Packet Radio Service) connection. +The availability of the particular connection +type depends on the phone model and service plan activated on the phone. +.Sh EXIT STATUS +.Ex -std +.Sh EXAMPLES +.Dl "rfcomm_pppd -s -a 00:01:02:03:04:05 -C 1 -l rfcomm-server" +.Pp +This command will start +.Nm +in the server mode. +The RFCOMM server will listen on local address +.Li 00:01:02:03:04:05 +and channel +.Li 1 . +Once the incoming connection has been accepted, +.Nm +will execute +.Xr ppp 8 +in +.Fl direct +mode with the +.Dq Li rfcomm-server +label. +.Pp +.Dl "rfcomm_pppd -c -a 00:01:02:03:04:05 -C 1 -l rfcomm-client" +.Pp +This command will start +.Nm +in the client mode. +.Nm +will try to connect to the RFCOMM server at +.Li 00:01:02:03:04:05 +address and channel +.Li 1 . +Once connected, +.Nm +will execute +.Xr ppp 8 +in +.Fl direct +mode with the +.Dq Li rfcomm-client +label. +.Sh SEE ALSO +.Xr rfcomm_sppd 1 , +.Xr bluetooth 3 , +.Xr ng_btsocket 4 , +.Xr ppp 8 , +.Xr sdpcontrol 8 , +.Xr sdpd 8 +.Sh AUTHORS +.An Maksim Yevmenkin Aq m_evmenkin@yahoo.com +.Sh CAVEATS +The +.Nm +utility in server mode will try to register the Bluetooth LAN Access Over PPP +service with the local SPD daemon. +If the local SDP daemon is not running, +.Nm +will exit with an error. |
