diff options
Diffstat (limited to 'sys/sparc64/sbus/sbusreg.h')
| -rw-r--r-- | sys/sparc64/sbus/sbusreg.h | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/sys/sparc64/sbus/sbusreg.h b/sys/sparc64/sbus/sbusreg.h new file mode 100644 index 0000000..6497f2a --- /dev/null +++ b/sys/sparc64/sbus/sbusreg.h @@ -0,0 +1,140 @@ +/* + * Copyright (c) 1996-1999 Eduardo Horvath + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * from: NetBSD: sbusreg.h,v 1.7 1999/06/07 05:28:03 eeh Exp + * + * $FreeBSD$ + */ + +#ifndef _SPARC64_SBUS_SBUSREG_H_ +#define _SPARC64_SBUS_SBUSREG_H_ + +/* + * Sbus device addresses are obtained from the FORTH PROMs. They come + * in `absolute' and `relative' address flavors, so we have to handle both. + * Relative addresses do *not* include the slot number. + */ +#define SBUS_BASE 0xf8000000 +#define SBUS_ADDR(slot, off) (SBUS_BASE + ((slot) << 25) + (off)) +#define SBUS_ABS(a) ((unsigned)(a) >= SBUS_BASE) +#define SBUS_ABS_TO_SLOT(a) (((a) - SBUS_BASE) >> 25) +#define SBUS_ABS_TO_OFFSET(a) (((a) - SBUS_BASE) & 0x1ffffff) + +/* + * Sun4u S-bus definitions. Here's where we deal w/the machine + * dependencies of sysio. + * + * SYSIO implements or is the interface to several things: + * + * o The SBUS interface itself + * o The IOMMU + * o The DVMA units + * o The interrupt controller + * o The counter/timers + * + * Since it has registers to control lots of different things + * as well as several on-board SBUS devices and external SBUS + * slots scattered throughout its address space, it's a pain. + * + * One good point, however, is that all registers are 64-bit. + */ +#define SBR_UPA_PORTID 0x0000 /* UPA port ID register */ +#define SBR_UPA_CONFIG 0x0008 /* UPA config register */ +#define SBR_CS 0x0010 /* SYSIO control/status register */ +#define SBR_ECCC 0x0020 /* ECC control register */ +#define SBR_UE_AFS 0x0030 /* Uncorrectable Error AFSR */ +#define SBR_UE_AFA 0x0038 /* Uncorrectable Error AFAR */ +#define SBR_CE_AFS 0x0040 /* Correctable Error AFSR */ +#define SBR_CE_AFA 0x0048 /* Correctable Error AFAR */ +#define SBR_PM_CTL 0x0100 /* Performance monitor control reg */ +#define SBR_PM_COUNT 0x0108 /* Performance monitor counter reg */ +#define SBR_CTL 0x2000 /* SBUS Control Register */ +#define SBR_AFS 0x2010 /* SBUS AFSR */ +#define SBR_AFA 0x2018 /* SBUS AFAR */ +#define SBR_CONFIG0 0x2020 /* SBUS Slot 0 config register */ +#define SBR_CONFIG1 0x2028 /* SBUS Slot 1 config register */ +#define SBR_CONFIG2 0x2030 /* SBUS Slot 2 config register */ +#define SBR_CONFIG3 0x2038 /* SBUS Slot 3 config register */ +#define SBR_CONFIG13 0x2040 /* Slot 13 config register <audio> */ +#define SBR_CONFIG14 0x2048 /* Slot 14 config register <macio> */ +#define SBR_CONFIG15 0x2050 /* Slot 15 config register <slavio> */ +#define SBR_IOMMU 0x2400 /* IOMMU register block */ +#define SBR_STRBUF 0x2800 /* stream buffer register block */ +#define SBR_SLOT0_INT_MAP 0x2c00 /* SBUS slot 0 interrupt map reg */ +#define SBR_SLOT1_INT_MAP 0x2c08 /* SBUS slot 1 interrupt map reg */ +#define SBR_SLOT2_INT_MAP 0x2c10 /* SBUS slot 2 interrupt map reg */ +#define SBR_SLOT3_INT_MAP 0x2c18 /* SBUS slot 3 interrupt map reg */ +#define SBR_INTR_RETRY_TIM 0x2c20 /* interrupt retry timer reg */ +#define SBR_SCSI_INT_MAP 0x3000 /* SCSI interrupt map reg */ +#define SBR_ETHER_INT_MAP 0x3008 /* ethernet interrupt map reg */ +#define SBR_BPP_INT_MAP 0x3010 /* parallel interrupt map reg */ +#define SBR_AUDIO_INT_MAP 0x3018 /* audio interrupt map reg */ +#define SBR_POWER_INT_MAP 0x3020 /* power fail interrupt map reg */ +#define SBR_SKBDMS_INT_MAP 0x3028 /* serial/kbd/mouse interrupt map reg */ +#define SBR_FD_INT_MAP 0x3030 /* floppy interrupt map reg */ +#define SBR_THERM_INT_MAP 0x3038 /* thermal warn interrupt map reg */ +#define SBR_KBD_INT_MAP 0x3040 /* kbd [unused] interrupt map reg */ +#define SBR_MOUSE_INT_MAP 0x3048 /* mouse [unused] interrupt map reg */ +#define SBR_SERIAL_INT_MAP 0x3050 /* second serial interrupt map reg */ +#define SBR_TIMER0_INT_MAP 0x3060 /* timer 0 interrupt map reg */ +#define SBR_TIMER1_INT_MAP 0x3068 /* timer 1 interrupt map reg */ +#define SBR_UE_INT_MAP 0x3070 /* UE interrupt map reg */ +#define SBR_CE_INT_MAP 0x3078 /* CE interrupt map reg */ +#define SBR_ASYNC_INT_MAP 0x3080 /* SBUS error interrupt map reg */ +#define SBR_PWRMGT_INT_MAP 0x3088 /* power mgmt wake interrupt map reg */ +#define SBR_UPAGR_INT_MAP 0x3090 /* UPA graphics interrupt map reg */ +#define SBR_RESERVED_INT_MAP 0x3098 /* reserved interrupt map reg */ +/* + * Note: clear interrupt 0 registers are not really used + */ +#define SBR_SLOT0_INT_CLR 0x3400 /* SBUS slot 0 clear int regs 0..7 */ +#define SBR_SLOT1_INT_CLR 0x3440 /* SBUS slot 1 clear int regs 0..7 */ +#define SBR_SLOT2_INT_CLR 0x3480 /* SBUS slot 2 clear int regs 0..7 */ +#define SBR_SLOT3_INT_CLR 0x34c0 /* SBUS slot 3 clear int regs 0..7 */ +#define SBR_SCSI_INT_CLR 0x3800 /* SCSI clear int reg */ +#define SBR_ETHER_INT_CLR 0x3808 /* ethernet clear int reg */ +#define SBR_BPP_INT_CLR 0x3810 /* parallel clear int reg */ +#define SBR_AUDIO_INT_CLR 0x3818 /* audio clear int reg */ +#define SBR_POWER_INT_CLR 0x3820 /* power fail clear int reg */ +#define SBR_SKBDMS_INT_CLR 0x3828 /* serial/kbd/mouse clear int reg */ +#define SBR_FD_INT_CLR 0x3830 /* floppy clear int reg */ +#define SBR_THERM_INT_CLR 0x3838 /* thermal warn clear int reg */ +#define SBR_KBD_INT_CLR 0x3840 /* kbd [unused] clear int reg */ +#define SBR_MOUSE_INT_CLR 0x3848 /* mouse [unused] clear int reg */ +#define SBR_SERIAL_INT_CLR 0x3850 /* second serial clear int reg */ +#define SBR_TIMER0_INT_CLR 0x3860 /* timer 0 clear int reg */ +#define SBR_TIMER1_INT_CLR 0x3868 /* timer 1 clear int reg */ +#define SBR_UE_INT_CLR 0x3870 /* UE clear int reg */ +#define SBR_CE_INT_CLR 0x3878 /* CE clear int reg */ +#define SBR_ASYNC_INT_CLR 0x3880 /* SBUS error clr interrupt reg */ +#define SBR_PWRMGT_INT_CLR 0x3888 /* power mgmt wake clr interrupt reg */ +#define SBR_TC0 0x3c00 /* timer/counter 0 */ +#define SBR_TC1 0x3c10 /* timer/counter 1 */ +#define SBR_IOMMU_SVADIAG 0x4400 /* SBUS virtual addr diag reg */ +#define SBR_IOMMU_QUEUE_DIAG 0x4500 /* IOMMU LRU queue diag 0..15 */ +#define SBR_IOMMU_TLB_TAG_DIAG 0x4580 /* TLB tag diag 0..15 */ +#define SBR_IOMMU_TLB_DATA_DIAG 0x4600 /* TLB data RAM diag 0..31 */ +#define SBR_INT_DIAG 0x4800 /* SBUS int state diag reg */ +#define SBR_OBIO_DIAG 0x4808 /* OBIO and misc int state diag reg */ +#define SBR_STRBUF_DIAG 0x5000 /* Streaming buffer diag regs */ + +#endif /* _SPARC64_SBUS_SBUSREG_H_ */ + |
