diff options
Diffstat (limited to 'sys/mips')
| -rw-r--r-- | sys/mips/conf/ONIONOMEGA | 53 | ||||
| -rw-r--r-- | sys/mips/conf/ONIONOMEGA.hints | 94 |
2 files changed, 147 insertions, 0 deletions
diff --git a/sys/mips/conf/ONIONOMEGA b/sys/mips/conf/ONIONOMEGA new file mode 100644 index 0000000..94c8a33 --- /dev/null +++ b/sys/mips/conf/ONIONOMEGA @@ -0,0 +1,53 @@ +# +# Onion Omega - an AR9330 based SoC +# +# https://onion.io/omega/ +# +# * AR9330 SoC +# * 64MB RAM +# * 16MB flash +# * Integrated 1x1 2GHz wifi and optional 10/100 ethernet +# +# $FreeBSD$ +# + +# Include the default AR933x parameters +include "AR933X_BASE" + +ident ONIONOMEGA + +# Override hints with board values +hints "ONIONOMEGA.hints" + +# Board memory - 64MB +options AR71XX_REALMEM=(64*1024*1024) + +# i2c GPIO bus +#device gpioiic +#device iicbb +#device iicbus +#device iic + +# Options required for miiproxy and mdiobus +options ARGE_MDIO # Export an MDIO bus separate from arge +device miiproxy # MDIO bus <-> MII PHY rendezvous + +device etherswitch +device arswitch + +# read MSDOS formatted disks - USB +#options MSDOSFS + +# Enable the uboot environment stuff rather then the +# redboot stuff. +options AR71XX_ENV_UBOOT + +# uzip - to boot natively from flash +device geom_uncompress +options GEOM_UNCOMPRESS + +# Used for the static uboot partition map +device geom_map + +# Boot off of the rootfs, as defined in the geom_map setup. +options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\" diff --git a/sys/mips/conf/ONIONOMEGA.hints b/sys/mips/conf/ONIONOMEGA.hints new file mode 100644 index 0000000..d3a6869 --- /dev/null +++ b/sys/mips/conf/ONIONOMEGA.hints @@ -0,0 +1,94 @@ +# +# This file adds to the values in AR933X_BASE.hints. +# +# $FreeBSD$ + +# mdiobus on arge1 +hint.argemdio.0.at="nexus0" +hint.argemdio.0.maddr=0x1a000000 +hint.argemdio.0.msize=0x1000 +hint.argemdio.0.order=0 + +# Embedded Atheros Switch +hint.arswitch.0.at="mdio0" + +# XXX this should really say it's an AR933x switch, as there +# are some vlan specific differences here! +hint.arswitch.0.is_7240=1 +hint.arswitch.0.numphys=4 +hint.arswitch.0.phy4cpu=1 # phy 4 is a "CPU" separate PHY +hint.arswitch.0.is_rgmii=0 +hint.arswitch.0.is_gmii=1 # arge1 <-> switch PHY is GMII + +# arge0 - MII, autoneg, phy(4) +hint.arge.0.phymask=0x10 # PHY4 +hint.arge.0.mdio=mdioproxy1 # .. off of the switch mdiobus +hint.arge.0.eeprommac=0x1fff0000 + +# arge1 - GMII, 1000/full +hint.arge.1.phymask=0x0 # No directly mapped PHYs +hint.arge.1.media=1000 +hint.arge.1.fduplex=1 +hint.arge.1.eeprommac=0x1fff0006 + +# 16MB flash layout: +# [ 0.510000] 5 tp-link partitions found on MTD device spi0.0 +# [ 0.510000] Creating 5 MTD partitions on "spi0.0": +# [ 0.520000] 0x000000000000-0x000000020000 : "u-boot" +# [ 0.520000] 0x000000020000-0x000000136468 : "kernel" +# [ 0.530000] 0x000000136468-0x000000ff0000 : "rootfs" +# [ 0.530000] mtd: device 2 (rootfs) set to be root filesystem +# [ 0.540000] 1 squashfs-split partitions found on MTD device rootfs +# [ 0.540000] 0x000000730000-0x000000fe0000 : "rootfs_data" +# [ 0.540000] 0x000000fe0000-0x000000ff0000 : "nvram" +# [ 0.550000] 0x000000ff0000-0x000001000000 : "art" +# [ 0.560000] 0x000000020000-0x000000fe0000 : "firmware" + +# 64KiB uboot +hint.map.0.at="flash/spi0" +hint.map.0.start=0x00000000 +hint.map.0.end=0x00010000 +hint.map.0.name="u-boot" +hint.map.0.readonly=1 + +# 64KiB uboot +hint.map.1.at="flash/spi0" +hint.map.1.start=0x00010000 +hint.map.1.end=0x00020000 +hint.map.1.name="uboot-env" +hint.map.1.readonly=1 + +# kernel +hint.map.2.at="flash/spi0" +hint.map.2.start=0x00020000 +hint.map.2.end="search:0x00020000:0x10000:.!/bin/sh" +hint.map.2.name="kernel" +hint.map.2.readonly=1 + +# rootfs ulzma +hint.map.3.at="flash/spi0" +hint.map.3.start="search:0x00020000:0x10000:.!/bin/sh" +hint.map.3.end=0x00fe0000 +hint.map.3.name="rootfs" +hint.map.3.readonly=1 + +# 64KiB cfg +hint.map.4.at="flash/spi0" +hint.map.4.start=0x00fe0000 +hint.map.4.end=0x00ff0000 +hint.map.4.name="cfg" +hint.map.4.readonly=0 + +# all firmware 16000KiB +hint.map.5.at="flash/spi0" +hint.map.5.start=0x00020000 +hint.map.5.end=0x00ff0000 +hint.map.5.name="firmware" +hint.map.5.readonly=0 + +# 64KiB ART +hint.map.6.at="flash/spi0" +hint.map.6.start=0x00ff0000 +hint.map.6.end=0x01000000 +hint.map.6.name="ART" +hint.map.6.readonly=1 |
