1 files changed, 419 insertions, 0 deletions

diff --git a/sys/legacy/dev/usb/uslcom.c b/sys/legacy/dev/usb/uslcom.c
new file mode 100644
index 0000000..edb13c5
--- /dev/null
+++ b/sys/legacy/dev/usb/uslcom.c
@@ -0,0 +1,419 @@
+/*	$FreeBSD$ */
+/*	$OpenBSD: uslcom.c,v 1.17 2007/11/24 10:52:12 jsg Exp $	*/
+
+/*
+ * Copyright (c) 2006 Jonathan Gray <jsg@openbsd.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/conf.h>
+#include <sys/bus.h>
+#include <sys/tty.h>
+
+#include <dev/usb/usb.h>
+#include <dev/usb/usbcdc.h>
+
+#include <dev/usb/usb.h>
+#include <dev/usb/usbdi.h>
+#include <dev/usb/usbdi_util.h>
+
+#include "usbdevs.h"
+#include <dev/usb/ucomvar.h>
+
+#ifdef USLCOM_DEBUG
+#define DPRINTFN(n, x)  do { if (uslcomdebug > (n)) printf x; } while (0)
+int	uslcomdebug = 1;
+#else
+#define DPRINTFN(n, x)
+#endif
+#define DPRINTF(x) DPRINTFN(0, x)
+
+#define USLCOMBUFSZ		256
+#define USLCOM_CONFIG_NO	0
+#define USLCOM_IFACE_NO		0
+
+#define USLCOM_SET_DATA_BITS(x)	(x << 8)
+
+#define USLCOM_WRITE		0x41
+#define USLCOM_READ		0xc1
+
+#define USLCOM_UART		0x00
+#define USLCOM_BAUD_RATE	0x01	
+#define USLCOM_DATA		0x03
+#define USLCOM_BREAK		0x05
+#define USLCOM_CTRL		0x07
+
+#define USLCOM_UART_DISABLE	0x00
+#define USLCOM_UART_ENABLE	0x01
+
+#define USLCOM_CTRL_DTR_ON	0x0001	
+#define USLCOM_CTRL_DTR_SET	0x0100
+#define USLCOM_CTRL_RTS_ON	0x0002
+#define USLCOM_CTRL_RTS_SET	0x0200
+#define USLCOM_CTRL_CTS		0x0010
+#define USLCOM_CTRL_DSR		0x0020
+#define USLCOM_CTRL_DCD		0x0080
+
+
+#define USLCOM_BAUD_REF		0x384000
+
+#define USLCOM_STOP_BITS_1	0x00
+#define USLCOM_STOP_BITS_2	0x02
+
+#define USLCOM_PARITY_NONE	0x00
+#define USLCOM_PARITY_ODD	0x10
+#define USLCOM_PARITY_EVEN	0x20
+
+#define USLCOM_BREAK_OFF	0x00
+#define USLCOM_BREAK_ON		0x01
+
+
+struct uslcom_softc {
+	struct ucom_softc	 sc_ucom;
+	device_t		 sc_dev;
+	usbd_device_handle	 sc_udev;
+
+	u_char			 sc_msr;
+	u_char			 sc_lsr;
+
+	u_char			 sc_dying;
+};
+
+void	uslcom_get_status(void *, int portno, u_char *lsr, u_char *msr);
+void	uslcom_set(void *, int, int, int);
+int	uslcom_param(void *, int, struct termios *);
+int	uslcom_open(void *sc, int portno);
+void	uslcom_close(void *, int);
+void	uslcom_break(void *sc, int portno, int onoff);
+
+struct ucom_callback uslcom_callback = {
+	uslcom_get_status,
+	uslcom_set,
+	uslcom_param,
+	NULL,
+	uslcom_open,
+	uslcom_close,
+	NULL,
+	NULL,
+};
+
+static const struct usb_devno uslcom_devs[] = {
+	{ USB_VENDOR_BALTECH,		USB_PRODUCT_BALTECH_CARDREADER },
+	{ USB_VENDOR_DYNASTREAM,	USB_PRODUCT_DYNASTREAM_ANTDEVBOARD },
+	{ USB_VENDOR_JABLOTRON,		USB_PRODUCT_JABLOTRON_PC60B },
+	{ USB_VENDOR_SILABS,		USB_PRODUCT_SILABS_ARGUSISP },
+	{ USB_VENDOR_SILABS,		USB_PRODUCT_SILABS_CRUMB128 },
+	{ USB_VENDOR_SILABS,		USB_PRODUCT_SILABS_DEGREE },
+	{ USB_VENDOR_SILABS,		USB_PRODUCT_SILABS_BURNSIDE },
+	{ USB_VENDOR_SILABS,		USB_PRODUCT_SILABS_HELICOM },
+	{ USB_VENDOR_SILABS,		USB_PRODUCT_SILABS_LIPOWSKY_HARP },
+	{ USB_VENDOR_SILABS,		USB_PRODUCT_SILABS_LIPOWSKY_JTAG },
+	{ USB_VENDOR_SILABS,		USB_PRODUCT_SILABS_LIPOWSKY_LIN },
+	{ USB_VENDOR_SILABS,		USB_PRODUCT_SILABS_POLOLU },
+	{ USB_VENDOR_SILABS,		USB_PRODUCT_SILABS_CP2102 },
+	{ USB_VENDOR_SILABS,		USB_PRODUCT_SILABS_CP210X_2 },
+	{ USB_VENDOR_SILABS,		USB_PRODUCT_SILABS_SUUNTO },
+	{ USB_VENDOR_SILABS,		USB_PRODUCT_SILABS_TRAQMATE },
+	{ USB_VENDOR_SILABS2,		USB_PRODUCT_SILABS2_DCU11CLONE },
+	{ USB_VENDOR_USI,		USB_PRODUCT_USI_MC60 }
+};
+
+static device_probe_t uslcom_match;
+static device_attach_t uslcom_attach;
+static device_detach_t uslcom_detach;
+
+static device_method_t uslcom_methods[] = {
+	/* Device interface */
+	DEVMETHOD(device_probe, uslcom_match),
+	DEVMETHOD(device_attach, uslcom_attach),
+	DEVMETHOD(device_detach, uslcom_detach),
+	{ 0, 0 }
+};
+
+static driver_t uslcom_driver = {
+	"ucom",
+	uslcom_methods,
+	sizeof (struct uslcom_softc)
+};
+
+DRIVER_MODULE(uslcom, uhub, uslcom_driver, ucom_devclass, usbd_driver_load, 0);
+MODULE_DEPEND(uslcom, usb, 1, 1, 1);
+MODULE_DEPEND(uslcom, ucom, UCOM_MINVER, UCOM_PREFVER, UCOM_MAXVER);
+MODULE_VERSION(uslcom, 1);
+
+static int
+uslcom_match(device_t self)
+{
+	struct usb_attach_arg *uaa = device_get_ivars(self);
+
+	if (uaa->iface != NULL)
+		return UMATCH_NONE;
+
+	return (usb_lookup(uslcom_devs, uaa->vendor, uaa->product) != NULL) ?
+	    UMATCH_VENDOR_PRODUCT : UMATCH_NONE;
+}
+
+static int
+uslcom_attach(device_t self)
+{
+	struct uslcom_softc *sc = device_get_softc(self);
+	struct usb_attach_arg *uaa = device_get_ivars(self);
+	usbd_device_handle dev = uaa->device;
+	struct ucom_softc* ucom;
+	usb_interface_descriptor_t *id;
+	usb_endpoint_descriptor_t *ed;
+	usbd_status error;
+	int i;
+
+	ucom = &sc->sc_ucom;
+	ucom->sc_dev = self;
+	ucom->sc_udev = dev;
+	ucom->sc_iface = uaa->iface;
+	
+	sc->sc_dev = self;
+	sc->sc_udev = uaa->device;
+
+	if (usbd_set_config_index(sc->sc_udev, USLCOM_CONFIG_NO, 1) != 0) {
+		device_printf(self, "could not set configuration no\n");
+		sc->sc_dying = 1;
+		return ENXIO;
+	}
+
+	/* get the first interface handle */
+	error = usbd_device2interface_handle(sc->sc_udev, USLCOM_IFACE_NO,
+	    &ucom->sc_iface);
+	if (error != 0) {
+		device_printf(self, "could not get interface handle\n");
+		sc->sc_dying = 1;
+		return ENXIO;
+	}
+
+	id = usbd_get_interface_descriptor(ucom->sc_iface);
+
+	ucom->sc_bulkin_no = ucom->sc_bulkout_no = -1;
+	for (i = 0; i < id->bNumEndpoints; i++) {
+		ed = usbd_interface2endpoint_descriptor(ucom->sc_iface, i);
+		if (ed == NULL) {
+			device_printf(self, "no endpoint descriptor found for %d\n",
+			    i);
+			sc->sc_dying = 1;
+			return ENXIO;
+		}
+
+		if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
+		    UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK)
+			ucom->sc_bulkin_no = ed->bEndpointAddress;
+		else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
+		    UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK)
+			ucom->sc_bulkout_no = ed->bEndpointAddress;
+	}
+
+	if (ucom->sc_bulkin_no == -1 || ucom->sc_bulkout_no == -1) {
+		device_printf(self, "missing endpoint\n");
+		sc->sc_dying = 1;
+		return ENXIO;
+	}
+
+	ucom->sc_parent = sc;
+	ucom->sc_portno = UCOM_UNK_PORTNO;
+	/* bulkin, bulkout set above */
+	ucom->sc_ibufsize = USLCOMBUFSZ;
+	ucom->sc_obufsize = USLCOMBUFSZ;
+	ucom->sc_ibufsizepad = USLCOMBUFSZ;
+	ucom->sc_opkthdrlen = 0;
+	ucom->sc_callback = &uslcom_callback;
+
+        DPRINTF(("uslcom: in = 0x%x, out = 0x%x\n",
+                 ucom->sc_bulkin_no, ucom->sc_bulkout_no));
+
+        ucom_attach(&sc->sc_ucom);
+        return 0;
+}
+
+static int
+uslcom_detach(device_t self)
+{
+	struct uslcom_softc *sc = device_get_softc(self);
+
+	sc->sc_dying = 1;
+	return ucom_detach(&sc->sc_ucom);
+}
+
+int
+uslcom_open(void *vsc, int portno)
+{
+	struct uslcom_softc *sc = vsc;
+	usb_device_request_t req;
+	usbd_status err;
+
+	if (sc->sc_dying)
+		return (EIO);
+
+	req.bmRequestType = USLCOM_WRITE;
+	req.bRequest = USLCOM_UART;
+	USETW(req.wValue, USLCOM_UART_ENABLE);
+	USETW(req.wIndex, portno);
+	USETW(req.wLength, 0);
+	err = usbd_do_request(sc->sc_udev, &req, NULL);
+	if (err)
+		return (EIO);
+
+	return (0);
+}
+
+void
+uslcom_close(void *vsc, int portno)
+{
+	struct uslcom_softc *sc = vsc;
+	usb_device_request_t req;
+
+	if (sc->sc_dying)
+		return;
+
+	req.bmRequestType = USLCOM_WRITE;
+	req.bRequest = USLCOM_UART;
+	USETW(req.wValue, USLCOM_UART_DISABLE);
+	USETW(req.wIndex, portno);
+	USETW(req.wLength, 0);
+	usbd_do_request(sc->sc_udev, &req, NULL);
+}
+
+void
+uslcom_set(void *vsc, int portno, int reg, int onoff)
+{
+	struct uslcom_softc *sc = vsc;
+	usb_device_request_t req;
+	int ctl;
+
+	switch (reg) {
+	case UCOM_SET_DTR:
+		ctl = onoff ? USLCOM_CTRL_DTR_ON : 0;
+		ctl |= USLCOM_CTRL_DTR_SET;
+		break;
+	case UCOM_SET_RTS:
+		ctl = onoff ? USLCOM_CTRL_RTS_ON : 0;
+		ctl |= USLCOM_CTRL_RTS_SET;
+		break;
+	case UCOM_SET_BREAK:
+		uslcom_break(sc, portno, onoff);
+		return;
+	default:
+		return;
+	}
+	req.bmRequestType = USLCOM_WRITE;
+	req.bRequest = USLCOM_CTRL;
+	USETW(req.wValue, ctl);
+	USETW(req.wIndex, portno);
+	USETW(req.wLength, 0);
+	usbd_do_request(sc->sc_udev, &req, NULL);
+}
+
+int
+uslcom_param(void *vsc, int portno, struct termios *t)
+{
+	struct uslcom_softc *sc = (struct uslcom_softc *)vsc;
+	usbd_status err;
+	usb_device_request_t req;
+	int data;
+
+	if (t->c_ospeed <= 0 || t->c_ospeed > 921600)
+		return (EINVAL);
+
+	req.bmRequestType = USLCOM_WRITE;
+	req.bRequest = USLCOM_BAUD_RATE;
+	USETW(req.wValue, USLCOM_BAUD_REF / t->c_ospeed);
+	USETW(req.wIndex, portno);
+	USETW(req.wLength, 0);
+	err = usbd_do_request(sc->sc_udev, &req, NULL);
+	if (err)
+		return (EIO);
+
+	if (ISSET(t->c_cflag, CSTOPB))
+		data = USLCOM_STOP_BITS_2;
+	else
+		data = USLCOM_STOP_BITS_1;
+	if (ISSET(t->c_cflag, PARENB)) {
+		if (ISSET(t->c_cflag, PARODD))
+			data |= USLCOM_PARITY_ODD;
+		else
+			data |= USLCOM_PARITY_EVEN;
+	} else
+		data |= USLCOM_PARITY_NONE;
+	switch (ISSET(t->c_cflag, CSIZE)) {
+	case CS5:
+		data |= USLCOM_SET_DATA_BITS(5);
+		break;
+	case CS6:
+		data |= USLCOM_SET_DATA_BITS(6);
+		break;
+	case CS7:
+		data |= USLCOM_SET_DATA_BITS(7);
+		break;
+	case CS8:
+		data |= USLCOM_SET_DATA_BITS(8);
+		break;
+	}
+
+	req.bmRequestType = USLCOM_WRITE;
+	req.bRequest = USLCOM_DATA;
+	USETW(req.wValue, data);
+	USETW(req.wIndex, portno);
+	USETW(req.wLength, 0);
+	err = usbd_do_request(sc->sc_udev, &req, NULL);
+	if (err)
+		return (EIO);
+
+#if 0
+	/* XXX flow control */
+	if (ISSET(t->c_cflag, CRTSCTS))
+		/*  rts/cts flow ctl */
+	} else if (ISSET(t->c_iflag, IXON|IXOFF)) {
+		/*  xon/xoff flow ctl */
+	} else {
+		/* disable flow ctl */
+	}
+#endif
+
+	return (0);
+}
+
+void
+uslcom_get_status(void *vsc, int portno, u_char *lsr, u_char *msr)
+{
+	struct uslcom_softc *sc = vsc;
+	
+	if (msr != NULL)
+		*msr = sc->sc_msr;
+	if (lsr != NULL)
+		*lsr = sc->sc_lsr;
+}
+
+void
+uslcom_break(void *vsc, int portno, int onoff)
+{
+	struct uslcom_softc *sc = vsc;
+	usb_device_request_t req;
+	int brk = onoff ? USLCOM_BREAK_ON : USLCOM_BREAK_OFF;	
+
+	req.bmRequestType = USLCOM_WRITE;
+	req.bRequest = USLCOM_BREAK;
+	USETW(req.wValue, brk);
+	USETW(req.wIndex, portno);
+	USETW(req.wLength, 0);
+	usbd_do_request(sc->sc_udev, &req, NULL);
+}