diff options
Diffstat (limited to 'sys/kern/vfs_aio.c')
-rw-r--r-- | sys/kern/vfs_aio.c | 2370 |
1 files changed, 2370 insertions, 0 deletions
diff --git a/sys/kern/vfs_aio.c b/sys/kern/vfs_aio.c new file mode 100644 index 0000000..16867cd --- /dev/null +++ b/sys/kern/vfs_aio.c @@ -0,0 +1,2370 @@ +/* + * Copyright (c) 1997 John S. Dyson. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. John S. Dyson's name may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * DISCLAIMER: This code isn't warranted to do anything useful. Anything + * bad that happens because of using this software isn't the responsibility + * of the author. This software is distributed AS-IS. + * + * $FreeBSD$ + */ + +/* + * This file contains support for the POSIX 1003.1B AIO/LIO facility. + */ + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/bio.h> +#include <sys/buf.h> +#include <sys/sysproto.h> +#include <sys/filedesc.h> +#include <sys/kernel.h> +#include <sys/fcntl.h> +#include <sys/file.h> +#include <sys/lock.h> +#include <sys/unistd.h> +#include <sys/proc.h> +#include <sys/resourcevar.h> +#include <sys/signalvar.h> +#include <sys/protosw.h> +#include <sys/socketvar.h> +#include <sys/sysctl.h> +#include <sys/vnode.h> +#include <sys/conf.h> +#include <sys/event.h> + +#include <vm/vm.h> +#include <vm/vm_extern.h> +#include <vm/pmap.h> +#include <vm/vm_map.h> +#include <vm/vm_zone.h> +#include <sys/aio.h> + +#include <machine/limits.h> +#include "opt_vfs_aio.h" + +static long jobrefid; + +#define JOBST_NULL 0x0 +#define JOBST_JOBQPROC 0x1 +#define JOBST_JOBQGLOBAL 0x2 +#define JOBST_JOBRUNNING 0x3 +#define JOBST_JOBFINISHED 0x4 +#define JOBST_JOBQBUF 0x5 +#define JOBST_JOBBFINISHED 0x6 + +#ifndef MAX_AIO_PER_PROC +#define MAX_AIO_PER_PROC 32 +#endif + +#ifndef MAX_AIO_QUEUE_PER_PROC +#define MAX_AIO_QUEUE_PER_PROC 256 /* Bigger than AIO_LISTIO_MAX */ +#endif + +#ifndef MAX_AIO_PROCS +#define MAX_AIO_PROCS 32 +#endif + +#ifndef MAX_AIO_QUEUE +#define MAX_AIO_QUEUE 1024 /* Bigger than AIO_LISTIO_MAX */ +#endif + +#ifndef TARGET_AIO_PROCS +#define TARGET_AIO_PROCS 4 +#endif + +#ifndef MAX_BUF_AIO +#define MAX_BUF_AIO 16 +#endif + +#ifndef AIOD_TIMEOUT_DEFAULT +#define AIOD_TIMEOUT_DEFAULT (10 * hz) +#endif + +#ifndef AIOD_LIFETIME_DEFAULT +#define AIOD_LIFETIME_DEFAULT (30 * hz) +#endif + +static int max_aio_procs = MAX_AIO_PROCS; +static int num_aio_procs = 0; +static int target_aio_procs = TARGET_AIO_PROCS; +static int max_queue_count = MAX_AIO_QUEUE; +static int num_queue_count = 0; +static int num_buf_aio = 0; +static int num_aio_resv_start = 0; +static int aiod_timeout; +static int aiod_lifetime; + +static int max_aio_per_proc = MAX_AIO_PER_PROC; +static int max_aio_queue_per_proc = MAX_AIO_QUEUE_PER_PROC; +static int max_buf_aio = MAX_BUF_AIO; + +SYSCTL_NODE(_vfs, OID_AUTO, aio, CTLFLAG_RW, 0, "AIO mgmt"); + +SYSCTL_INT(_vfs_aio, OID_AUTO, max_aio_per_proc, + CTLFLAG_RW, &max_aio_per_proc, 0, ""); + +SYSCTL_INT(_vfs_aio, OID_AUTO, max_aio_queue_per_proc, + CTLFLAG_RW, &max_aio_queue_per_proc, 0, ""); + +SYSCTL_INT(_vfs_aio, OID_AUTO, max_aio_procs, + CTLFLAG_RW, &max_aio_procs, 0, ""); + +SYSCTL_INT(_vfs_aio, OID_AUTO, num_aio_procs, + CTLFLAG_RD, &num_aio_procs, 0, ""); + +SYSCTL_INT(_vfs_aio, OID_AUTO, num_queue_count, + CTLFLAG_RD, &num_queue_count, 0, ""); + +SYSCTL_INT(_vfs_aio, OID_AUTO, max_aio_queue, + CTLFLAG_RW, &max_queue_count, 0, ""); + +SYSCTL_INT(_vfs_aio, OID_AUTO, target_aio_procs, + CTLFLAG_RW, &target_aio_procs, 0, ""); + +SYSCTL_INT(_vfs_aio, OID_AUTO, max_buf_aio, + CTLFLAG_RW, &max_buf_aio, 0, ""); + +SYSCTL_INT(_vfs_aio, OID_AUTO, num_buf_aio, + CTLFLAG_RD, &num_buf_aio, 0, ""); + +SYSCTL_INT(_vfs_aio, OID_AUTO, aiod_lifetime, + CTLFLAG_RW, &aiod_lifetime, 0, ""); + +SYSCTL_INT(_vfs_aio, OID_AUTO, aiod_timeout, + CTLFLAG_RW, &aiod_timeout, 0, ""); + +/* + * AIO process info + */ +#define AIOP_FREE 0x1 /* proc on free queue */ +#define AIOP_SCHED 0x2 /* proc explicitly scheduled */ + +struct aioproclist { + int aioprocflags; /* AIO proc flags */ + TAILQ_ENTRY(aioproclist) list; /* List of processes */ + struct proc *aioproc; /* The AIO thread */ + TAILQ_HEAD (,aiocblist) jobtorun; /* suggested job to run */ +}; + +/* + * data-structure for lio signal management + */ +struct aio_liojob { + int lioj_flags; + int lioj_buffer_count; + int lioj_buffer_finished_count; + int lioj_queue_count; + int lioj_queue_finished_count; + struct sigevent lioj_signal; /* signal on all I/O done */ + TAILQ_ENTRY (aio_liojob) lioj_list; + struct kaioinfo *lioj_ki; +}; +#define LIOJ_SIGNAL 0x1 /* signal on all done (lio) */ +#define LIOJ_SIGNAL_POSTED 0x2 /* signal has been posted */ + +/* + * per process aio data structure + */ +struct kaioinfo { + int kaio_flags; /* per process kaio flags */ + int kaio_maxactive_count; /* maximum number of AIOs */ + int kaio_active_count; /* number of currently used AIOs */ + int kaio_qallowed_count; /* maxiumu size of AIO queue */ + int kaio_queue_count; /* size of AIO queue */ + int kaio_ballowed_count; /* maximum number of buffers */ + int kaio_queue_finished_count; /* number of daemon jobs finished */ + int kaio_buffer_count; /* number of physio buffers */ + int kaio_buffer_finished_count; /* count of I/O done */ + struct proc *kaio_p; /* process that uses this kaio block */ + TAILQ_HEAD (,aio_liojob) kaio_liojoblist; /* list of lio jobs */ + TAILQ_HEAD (,aiocblist) kaio_jobqueue; /* job queue for process */ + TAILQ_HEAD (,aiocblist) kaio_jobdone; /* done queue for process */ + TAILQ_HEAD (,aiocblist) kaio_bufqueue; /* buffer job queue for process */ + TAILQ_HEAD (,aiocblist) kaio_bufdone; /* buffer done queue for process */ + TAILQ_HEAD (,aiocblist) kaio_sockqueue; /* queue for aios waiting on sockets */ +}; + +#define KAIO_RUNDOWN 0x1 /* process is being run down */ +#define KAIO_WAKEUP 0x2 /* wakeup process when there is a significant event */ + +static TAILQ_HEAD(,aioproclist) aio_freeproc, aio_activeproc; +static TAILQ_HEAD(,aiocblist) aio_jobs; /* Async job list */ +static TAILQ_HEAD(,aiocblist) aio_bufjobs; /* Phys I/O job list */ +static TAILQ_HEAD(,aiocblist) aio_freejobs; /* Pool of free jobs */ + +static void aio_init_aioinfo(struct proc *p); +static void aio_onceonly(void *); +static int aio_free_entry(struct aiocblist *aiocbe); +static void aio_process(struct aiocblist *aiocbe); +static int aio_newproc(void); +static int aio_aqueue(struct proc *p, struct aiocb *job, int type); +static void aio_physwakeup(struct buf *bp); +static int aio_fphysio(struct proc *p, struct aiocblist *aiocbe, int type); +static int aio_qphysio(struct proc *p, struct aiocblist *iocb); +static void aio_daemon(void *uproc); + +static int filt_aioattach(struct knote *kn); +static void filt_aiodetach(struct knote *kn); +static int filt_aio(struct knote *kn, long hint); + +struct filterops aio_filtops = + { 0, filt_aioattach, filt_aiodetach, filt_aio }; + +SYSINIT(aio, SI_SUB_VFS, SI_ORDER_ANY, aio_onceonly, NULL); + +static vm_zone_t kaio_zone = 0, aiop_zone = 0, aiocb_zone = 0, aiol_zone = 0; +static vm_zone_t aiolio_zone = 0; + +/* + * Startup initialization + */ +void +aio_onceonly(void *na) +{ + TAILQ_INIT(&aio_freeproc); + TAILQ_INIT(&aio_activeproc); + TAILQ_INIT(&aio_jobs); + TAILQ_INIT(&aio_bufjobs); + TAILQ_INIT(&aio_freejobs); + kaio_zone = zinit("AIO", sizeof (struct kaioinfo), 0, 0, 1); + aiop_zone = zinit("AIOP", sizeof (struct aioproclist), 0, 0, 1); + aiocb_zone = zinit("AIOCB", sizeof (struct aiocblist), 0, 0, 1); + aiol_zone = zinit("AIOL", AIO_LISTIO_MAX * sizeof (int), 0, 0, 1); + aiolio_zone = zinit("AIOLIO", AIO_LISTIO_MAX * sizeof (struct + aio_liojob), 0, 0, 1); + aiod_timeout = AIOD_TIMEOUT_DEFAULT; + aiod_lifetime = AIOD_LIFETIME_DEFAULT; + jobrefid = 1; +} + +/* + * Init the per-process aioinfo structure. The aioinfo limits are set + * per-process for user limit (resource) management. + */ +void +aio_init_aioinfo(struct proc *p) +{ + struct kaioinfo *ki; + if (p->p_aioinfo == NULL) { + ki = zalloc(kaio_zone); + p->p_aioinfo = ki; + ki->kaio_flags = 0; + ki->kaio_maxactive_count = max_aio_per_proc; + ki->kaio_active_count = 0; + ki->kaio_qallowed_count = max_aio_queue_per_proc; + ki->kaio_queue_count = 0; + ki->kaio_ballowed_count = max_buf_aio; + ki->kaio_buffer_count = 0; + ki->kaio_buffer_finished_count = 0; + ki->kaio_p = p; + TAILQ_INIT(&ki->kaio_jobdone); + TAILQ_INIT(&ki->kaio_jobqueue); + TAILQ_INIT(&ki->kaio_bufdone); + TAILQ_INIT(&ki->kaio_bufqueue); + TAILQ_INIT(&ki->kaio_liojoblist); + TAILQ_INIT(&ki->kaio_sockqueue); + } + + while (num_aio_procs < target_aio_procs) + aio_newproc(); +} + +/* + * Free a job entry. Wait for completion if it is currently active, but don't + * delay forever. If we delay, we return a flag that says that we have to + * restart the queue scan. + */ +int +aio_free_entry(struct aiocblist *aiocbe) +{ + struct kaioinfo *ki; + struct aioproclist *aiop; + struct aio_liojob *lj; + struct proc *p; + int error; + int s; + + if (aiocbe->jobstate == JOBST_NULL) + panic("aio_free_entry: freeing already free job"); + + p = aiocbe->userproc; + ki = p->p_aioinfo; + lj = aiocbe->lio; + if (ki == NULL) + panic("aio_free_entry: missing p->p_aioinfo"); + + if (aiocbe->jobstate == JOBST_JOBRUNNING) { + if (aiocbe->jobflags & AIOCBLIST_ASYNCFREE) + return 0; + aiocbe->jobflags |= AIOCBLIST_RUNDOWN; + tsleep(aiocbe, PRIBIO|PCATCH, "jobwai", 0); + } + aiocbe->jobflags &= ~AIOCBLIST_ASYNCFREE; + + if (aiocbe->bp == NULL) { + if (ki->kaio_queue_count <= 0) + panic("aio_free_entry: process queue size <= 0"); + if (num_queue_count <= 0) + panic("aio_free_entry: system wide queue size <= 0"); + + if (lj) { + lj->lioj_queue_count--; + if (aiocbe->jobflags & AIOCBLIST_DONE) + lj->lioj_queue_finished_count--; + } + ki->kaio_queue_count--; + if (aiocbe->jobflags & AIOCBLIST_DONE) + ki->kaio_queue_finished_count--; + num_queue_count--; + } else { + if (lj) { + lj->lioj_buffer_count--; + if (aiocbe->jobflags & AIOCBLIST_DONE) + lj->lioj_buffer_finished_count--; + } + if (aiocbe->jobflags & AIOCBLIST_DONE) + ki->kaio_buffer_finished_count--; + ki->kaio_buffer_count--; + num_buf_aio--; + } + + /* aiocbe is going away, we need to destroy any knotes */ + knote_remove(p, &aiocbe->klist); + + if ((ki->kaio_flags & KAIO_WAKEUP) || ((ki->kaio_flags & KAIO_RUNDOWN) + && ((ki->kaio_buffer_count == 0) && (ki->kaio_queue_count == 0)))) { + ki->kaio_flags &= ~KAIO_WAKEUP; + wakeup(p); + } + + if (aiocbe->jobstate == JOBST_JOBQBUF) { + if ((error = aio_fphysio(p, aiocbe, 1)) != 0) + return error; + if (aiocbe->jobstate != JOBST_JOBBFINISHED) + panic("aio_free_entry: invalid physio finish-up state"); + s = splbio(); + TAILQ_REMOVE(&ki->kaio_bufdone, aiocbe, plist); + splx(s); + } else if (aiocbe->jobstate == JOBST_JOBQPROC) { + aiop = aiocbe->jobaioproc; + TAILQ_REMOVE(&aiop->jobtorun, aiocbe, list); + } else if (aiocbe->jobstate == JOBST_JOBQGLOBAL) + TAILQ_REMOVE(&aio_jobs, aiocbe, list); + else if (aiocbe->jobstate == JOBST_JOBFINISHED) + TAILQ_REMOVE(&ki->kaio_jobdone, aiocbe, plist); + else if (aiocbe->jobstate == JOBST_JOBBFINISHED) { + s = splbio(); + TAILQ_REMOVE(&ki->kaio_bufdone, aiocbe, plist); + splx(s); + if (aiocbe->bp) { + vunmapbuf(aiocbe->bp); + relpbuf(aiocbe->bp, NULL); + aiocbe->bp = NULL; + } + } + if (lj && (lj->lioj_buffer_count == 0) && (lj->lioj_queue_count == 0)) { + TAILQ_REMOVE(&ki->kaio_liojoblist, lj, lioj_list); + zfree(aiolio_zone, lj); + } + TAILQ_INSERT_HEAD(&aio_freejobs, aiocbe, list); + aiocbe->jobstate = JOBST_NULL; + return 0; +} + +/* + * Rundown the jobs for a given process. + */ +void +aio_proc_rundown(struct proc *p) +{ + int s; + struct kaioinfo *ki; + struct aio_liojob *lj, *ljn; + struct aiocblist *aiocbe, *aiocbn; + struct file *fp; + struct filedesc *fdp; + struct socket *so; + + ki = p->p_aioinfo; + if (ki == NULL) + return; + + ki->kaio_flags |= LIOJ_SIGNAL_POSTED; + while ((ki->kaio_active_count > 0) || (ki->kaio_buffer_count > + ki->kaio_buffer_finished_count)) { + ki->kaio_flags |= KAIO_RUNDOWN; + if (tsleep(p, PRIBIO, "kaiowt", aiod_timeout)) + break; + } + + /* + * Move any aio ops that are waiting on socket I/O to the normal job + * queues so they are cleaned up with any others. + */ + fdp = p->p_fd; + + s = splnet(); + for (aiocbe = TAILQ_FIRST(&ki->kaio_sockqueue); aiocbe; aiocbe = + aiocbn) { + aiocbn = TAILQ_NEXT(aiocbe, plist); + fp = fdp->fd_ofiles[aiocbe->uaiocb.aio_fildes]; + + /* + * Under some circumstances, the aio_fildes and the file + * structure don't match. This would leave aiocbe's in the + * TAILQ associated with the socket and cause a panic later. + * + * Detect and fix. + */ + if ((fp == NULL) || (fp != aiocbe->fd_file)) + fp = aiocbe->fd_file; + if (fp) { + so = (struct socket *)fp->f_data; + TAILQ_REMOVE(&so->so_aiojobq, aiocbe, list); + if (TAILQ_EMPTY(&so->so_aiojobq)) { + so->so_snd.sb_flags &= ~SB_AIO; + so->so_rcv.sb_flags &= ~SB_AIO; + } + } + TAILQ_REMOVE(&ki->kaio_sockqueue, aiocbe, plist); + TAILQ_INSERT_HEAD(&aio_jobs, aiocbe, list); + TAILQ_INSERT_HEAD(&ki->kaio_jobqueue, aiocbe, plist); + } + splx(s); + +restart1: + for (aiocbe = TAILQ_FIRST(&ki->kaio_jobdone); aiocbe; aiocbe = aiocbn) { + aiocbn = TAILQ_NEXT(aiocbe, plist); + if (aio_free_entry(aiocbe)) + goto restart1; + } + +restart2: + for (aiocbe = TAILQ_FIRST(&ki->kaio_jobqueue); aiocbe; aiocbe = + aiocbn) { + aiocbn = TAILQ_NEXT(aiocbe, plist); + if (aio_free_entry(aiocbe)) + goto restart2; + } + +/* + * Note the use of lots of splbio here, trying to avoid splbio for long chains + * of I/O. Probably unnecessary. + */ +restart3: + s = splbio(); + while (TAILQ_FIRST(&ki->kaio_bufqueue)) { + ki->kaio_flags |= KAIO_WAKEUP; + tsleep(p, PRIBIO, "aioprn", 0); + splx(s); + goto restart3; + } + splx(s); + +restart4: + s = splbio(); + for (aiocbe = TAILQ_FIRST(&ki->kaio_bufdone); aiocbe; aiocbe = aiocbn) { + aiocbn = TAILQ_NEXT(aiocbe, plist); + if (aio_free_entry(aiocbe)) { + splx(s); + goto restart4; + } + } + splx(s); + + for (lj = TAILQ_FIRST(&ki->kaio_liojoblist); lj; lj = ljn) { + ljn = TAILQ_NEXT(lj, lioj_list); + if ((lj->lioj_buffer_count == 0) && (lj->lioj_queue_count == + 0)) { + TAILQ_REMOVE(&ki->kaio_liojoblist, lj, lioj_list); + zfree(aiolio_zone, lj); + } else { +#ifdef DIAGNOSTIC + printf("LIO job not cleaned up: B:%d, BF:%d, Q:%d, " + "QF:%d\n", lj->lioj_buffer_count, + lj->lioj_buffer_finished_count, + lj->lioj_queue_count, + lj->lioj_queue_finished_count); +#endif + } + } + + zfree(kaio_zone, ki); + p->p_aioinfo = NULL; +} + +/* + * Select a job to run (called by an AIO daemon). + */ +static struct aiocblist * +aio_selectjob(struct aioproclist *aiop) +{ + int s; + struct aiocblist *aiocbe; + struct kaioinfo *ki; + struct proc *userp; + + aiocbe = TAILQ_FIRST(&aiop->jobtorun); + if (aiocbe) { + TAILQ_REMOVE(&aiop->jobtorun, aiocbe, list); + return aiocbe; + } + + s = splnet(); + for (aiocbe = TAILQ_FIRST(&aio_jobs); aiocbe; aiocbe = + TAILQ_NEXT(aiocbe, list)) { + userp = aiocbe->userproc; + ki = userp->p_aioinfo; + + if (ki->kaio_active_count < ki->kaio_maxactive_count) { + TAILQ_REMOVE(&aio_jobs, aiocbe, list); + splx(s); + return aiocbe; + } + } + splx(s); + + return NULL; +} + +/* + * The AIO processing activity. This is the code that does the I/O request for + * the non-physio version of the operations. The normal vn operations are used, + * and this code should work in all instances for every type of file, including + * pipes, sockets, fifos, and regular files. + */ +void +aio_process(struct aiocblist *aiocbe) +{ + struct filedesc *fdp; + struct proc *userp, *mycp; + struct aiocb *cb; + struct file *fp; + struct uio auio; + struct iovec aiov; + unsigned int fd; + int cnt; + int error; + off_t offset; + int oublock_st, oublock_end; + int inblock_st, inblock_end; + + userp = aiocbe->userproc; + cb = &aiocbe->uaiocb; + + mycp = curproc; + + fdp = mycp->p_fd; + fd = cb->aio_fildes; + fp = fdp->fd_ofiles[fd]; + + if ((fp == NULL) || (fp != aiocbe->fd_file)) { + cb->_aiocb_private.error = EBADF; + cb->_aiocb_private.status = -1; + return; + } + + aiov.iov_base = (void *)cb->aio_buf; + aiov.iov_len = cb->aio_nbytes; + + auio.uio_iov = &aiov; + auio.uio_iovcnt = 1; + auio.uio_offset = offset = cb->aio_offset; + auio.uio_resid = cb->aio_nbytes; + cnt = cb->aio_nbytes; + auio.uio_segflg = UIO_USERSPACE; + auio.uio_procp = mycp; + + inblock_st = mycp->p_stats->p_ru.ru_inblock; + oublock_st = mycp->p_stats->p_ru.ru_oublock; + if (cb->aio_lio_opcode == LIO_READ) { + auio.uio_rw = UIO_READ; + error = fo_read(fp, &auio, fp->f_cred, FOF_OFFSET, mycp); + } else { + auio.uio_rw = UIO_WRITE; + error = fo_write(fp, &auio, fp->f_cred, FOF_OFFSET, mycp); + } + inblock_end = mycp->p_stats->p_ru.ru_inblock; + oublock_end = mycp->p_stats->p_ru.ru_oublock; + + aiocbe->inputcharge = inblock_end - inblock_st; + aiocbe->outputcharge = oublock_end - oublock_st; + + if ((error) && (auio.uio_resid != cnt)) { + if (error == ERESTART || error == EINTR || error == EWOULDBLOCK) + error = 0; + if ((error == EPIPE) && (cb->aio_lio_opcode == LIO_WRITE)) + psignal(userp, SIGPIPE); + } + + cnt -= auio.uio_resid; + cb->_aiocb_private.error = error; + cb->_aiocb_private.status = cnt; + + return; +} + +/* + * The AIO daemon, most of the actual work is done in aio_process, + * but the setup (and address space mgmt) is done in this routine. + */ +static void +aio_daemon(void *uproc) +{ + int s; + struct aio_liojob *lj; + struct aiocb *cb; + struct aiocblist *aiocbe; + struct aioproclist *aiop; + struct kaioinfo *ki; + struct proc *curcp, *mycp, *userp; + struct vmspace *myvm, *tmpvm; + + /* + * Local copies of curproc (cp) and vmspace (myvm) + */ + mycp = curproc; + myvm = mycp->p_vmspace; + + if (mycp->p_textvp) { + vrele(mycp->p_textvp); + mycp->p_textvp = NULL; + } + + /* + * Allocate and ready the aio control info. There is one aiop structure + * per daemon. + */ + aiop = zalloc(aiop_zone); + aiop->aioproc = mycp; + aiop->aioprocflags |= AIOP_FREE; + TAILQ_INIT(&aiop->jobtorun); + + s = splnet(); + + /* + * Place thread (lightweight process) onto the AIO free thread list. + */ + if (TAILQ_EMPTY(&aio_freeproc)) + wakeup(&aio_freeproc); + TAILQ_INSERT_HEAD(&aio_freeproc, aiop, list); + + splx(s); + + /* Make up a name for the daemon. */ + strcpy(mycp->p_comm, "aiod"); + + /* + * Get rid of our current filedescriptors. AIOD's don't need any + * filedescriptors, except as temporarily inherited from the client. + * Credentials are also cloned, and made equivalent to "root". + */ + fdfree(mycp); + mycp->p_fd = NULL; + mycp->p_ucred = crcopy(mycp->p_ucred); + mycp->p_ucred->cr_uid = 0; + mycp->p_ucred->cr_ngroups = 1; + mycp->p_ucred->cr_groups[0] = 1; + + /* The daemon resides in its own pgrp. */ + enterpgrp(mycp, mycp->p_pid, 1); + + /* Mark special process type. */ + mycp->p_flag |= P_SYSTEM | P_KTHREADP; + + /* + * Wakeup parent process. (Parent sleeps to keep from blasting away + * creating to many daemons.) + */ + wakeup(mycp); + + for (;;) { + /* + * curcp is the current daemon process context. + * userp is the current user process context. + */ + curcp = mycp; + + /* + * Take daemon off of free queue + */ + if (aiop->aioprocflags & AIOP_FREE) { + s = splnet(); + TAILQ_REMOVE(&aio_freeproc, aiop, list); + TAILQ_INSERT_TAIL(&aio_activeproc, aiop, list); + aiop->aioprocflags &= ~AIOP_FREE; + splx(s); + } + aiop->aioprocflags &= ~AIOP_SCHED; + + /* + * Check for jobs. + */ + while ((aiocbe = aio_selectjob(aiop)) != NULL) { + cb = &aiocbe->uaiocb; + userp = aiocbe->userproc; + + aiocbe->jobstate = JOBST_JOBRUNNING; + + /* + * Connect to process address space for user program. + */ + if (userp != curcp) { + /* + * Save the current address space that we are + * connected to. + */ + tmpvm = mycp->p_vmspace; + + /* + * Point to the new user address space, and + * refer to it. + */ + mycp->p_vmspace = userp->p_vmspace; + mycp->p_vmspace->vm_refcnt++; + + /* Activate the new mapping. */ + pmap_activate(mycp); + + /* + * If the old address space wasn't the daemons + * own address space, then we need to remove the + * daemon's reference from the other process + * that it was acting on behalf of. + */ + if (tmpvm != myvm) { + vmspace_free(tmpvm); + } + + /* + * Disassociate from previous clients file + * descriptors, and associate to the new clients + * descriptors. Note that the daemon doesn't + * need to worry about its orginal descriptors, + * because they were originally freed. + */ + if (mycp->p_fd) + fdfree(mycp); + mycp->p_fd = fdshare(userp); + curcp = userp; + } + + ki = userp->p_aioinfo; + lj = aiocbe->lio; + + /* Account for currently active jobs. */ + ki->kaio_active_count++; + + /* Do the I/O function. */ + aiocbe->jobaioproc = aiop; + aio_process(aiocbe); + + /* Decrement the active job count. */ + ki->kaio_active_count--; + + /* + * Increment the completion count for wakeup/signal + * comparisons. + */ + aiocbe->jobflags |= AIOCBLIST_DONE; + ki->kaio_queue_finished_count++; + if (lj) + lj->lioj_queue_finished_count++; + if ((ki->kaio_flags & KAIO_WAKEUP) || ((ki->kaio_flags + & KAIO_RUNDOWN) && (ki->kaio_active_count == 0))) { + ki->kaio_flags &= ~KAIO_WAKEUP; + wakeup(userp); + } + + s = splbio(); + if (lj && (lj->lioj_flags & + (LIOJ_SIGNAL|LIOJ_SIGNAL_POSTED)) == LIOJ_SIGNAL) { + if ((lj->lioj_queue_finished_count == + lj->lioj_queue_count) && + (lj->lioj_buffer_finished_count == + lj->lioj_buffer_count)) { + psignal(userp, + lj->lioj_signal.sigev_signo); + lj->lioj_flags |= + LIOJ_SIGNAL_POSTED; + } + } + splx(s); + + aiocbe->jobstate = JOBST_JOBFINISHED; + + /* + * If the I/O request should be automatically rundown, + * do the needed cleanup. Otherwise, place the queue + * entry for the just finished I/O request into the done + * queue for the associated client. + */ + s = splnet(); + if (aiocbe->jobflags & AIOCBLIST_ASYNCFREE) { + aiocbe->jobflags &= ~AIOCBLIST_ASYNCFREE; + TAILQ_INSERT_HEAD(&aio_freejobs, aiocbe, list); + } else { + TAILQ_REMOVE(&ki->kaio_jobqueue, aiocbe, plist); + TAILQ_INSERT_TAIL(&ki->kaio_jobdone, aiocbe, + plist); + } + splx(s); + KNOTE(&aiocbe->klist, 0); + + if (aiocbe->jobflags & AIOCBLIST_RUNDOWN) { + wakeup(aiocbe); + aiocbe->jobflags &= ~AIOCBLIST_RUNDOWN; + } + + if (cb->aio_sigevent.sigev_notify == SIGEV_SIGNAL) { + psignal(userp, cb->aio_sigevent.sigev_signo); + } + } + + /* + * Disconnect from user address space. + */ + if (curcp != mycp) { + /* Get the user address space to disconnect from. */ + tmpvm = mycp->p_vmspace; + + /* Get original address space for daemon. */ + mycp->p_vmspace = myvm; + + /* Activate the daemon's address space. */ + pmap_activate(mycp); +#ifdef DIAGNOSTIC + if (tmpvm == myvm) { + printf("AIOD: vmspace problem -- %d\n", + mycp->p_pid); + } +#endif + /* Remove our vmspace reference. */ + vmspace_free(tmpvm); + + /* + * Disassociate from the user process's file + * descriptors. + */ + if (mycp->p_fd) + fdfree(mycp); + mycp->p_fd = NULL; + curcp = mycp; + } + + /* + * If we are the first to be put onto the free queue, wakeup + * anyone waiting for a daemon. + */ + s = splnet(); + TAILQ_REMOVE(&aio_activeproc, aiop, list); + if (TAILQ_EMPTY(&aio_freeproc)) + wakeup(&aio_freeproc); + TAILQ_INSERT_HEAD(&aio_freeproc, aiop, list); + aiop->aioprocflags |= AIOP_FREE; + splx(s); + + /* + * If daemon is inactive for a long time, allow it to exit, + * thereby freeing resources. + */ + if (((aiop->aioprocflags & AIOP_SCHED) == 0) && tsleep(mycp, + PRIBIO, "aiordy", aiod_lifetime)) { + s = splnet(); + if ((TAILQ_FIRST(&aio_jobs) == NULL) && + (TAILQ_FIRST(&aiop->jobtorun) == NULL)) { + if ((aiop->aioprocflags & AIOP_FREE) && + (num_aio_procs > target_aio_procs)) { + TAILQ_REMOVE(&aio_freeproc, aiop, list); + splx(s); + zfree(aiop_zone, aiop); + num_aio_procs--; +#ifdef DIAGNOSTIC + if (mycp->p_vmspace->vm_refcnt <= 1) { + printf("AIOD: bad vm refcnt for" + " exiting daemon: %d\n", + mycp->p_vmspace->vm_refcnt); + } +#endif + exit1(mycp, 0); + } + } + splx(s); + } + } +} + +/* + * Create a new AIO daemon. This is mostly a kernel-thread fork routine. The + * AIO daemon modifies its environment itself. + */ +static int +aio_newproc() +{ + int error; + struct proc *p, *np; + + p = &proc0; + error = fork1(p, RFPROC|RFMEM|RFNOWAIT, &np); + if (error) + return error; + cpu_set_fork_handler(np, aio_daemon, curproc); + + /* + * Wait until daemon is started, but continue on just in case to + * handle error conditions. + */ + error = tsleep(np, PZERO, "aiosta", aiod_timeout); + num_aio_procs++; + + return error; +} + +/* + * Try the high-performance physio method for eligible VCHR devices. This + * routine doesn't require the use of any additional threads, and have overhead. + */ +int +aio_qphysio(struct proc *p, struct aiocblist *aiocbe) +{ + int error; + struct aiocb *cb; + struct file *fp; + struct buf *bp; + struct vnode *vp; + struct kaioinfo *ki; + struct filedesc *fdp; + struct aio_liojob *lj; + int fd; + int s; + int cnt, notify; + + cb = &aiocbe->uaiocb; + fdp = p->p_fd; + fd = cb->aio_fildes; + fp = fdp->fd_ofiles[fd]; + + if (fp->f_type != DTYPE_VNODE) + return (-1); + + vp = (struct vnode *)fp->f_data; + + /* + * If its not a disk, we don't want to return a positive error. + * It causes the aio code to not fall through to try the thread + * way when you're talking to a regular file. + */ + if (!vn_isdisk(vp, &error)) { + if (error == ENOTBLK) + return (-1); + else + return (error); + } + + if (cb->aio_nbytes % vp->v_rdev->si_bsize_phys) + return (-1); + + if ((cb->aio_nbytes > MAXPHYS) && (num_buf_aio >= max_buf_aio)) + return (-1); + + ki = p->p_aioinfo; + if (ki->kaio_buffer_count >= ki->kaio_ballowed_count) + return (-1); + + cnt = cb->aio_nbytes; + if (cnt > MAXPHYS) + return (-1); + + /* + * Physical I/O is charged directly to the process, so we don't have to + * fake it. + */ + aiocbe->inputcharge = 0; + aiocbe->outputcharge = 0; + + ki->kaio_buffer_count++; + + lj = aiocbe->lio; + if (lj) + lj->lioj_buffer_count++; + + /* Create and build a buffer header for a transfer. */ + bp = (struct buf *)getpbuf(NULL); + + /* + * Get a copy of the kva from the physical buffer. + */ + bp->b_caller1 = p; + bp->b_dev = vp->v_rdev; + error = bp->b_error = 0; + + bp->b_bcount = cb->aio_nbytes; + bp->b_bufsize = cb->aio_nbytes; + bp->b_flags = B_PHYS; + bp->b_iodone = aio_physwakeup; + bp->b_saveaddr = bp->b_data; + bp->b_data = (void *)cb->aio_buf; + bp->b_blkno = btodb(cb->aio_offset); + + if (cb->aio_lio_opcode == LIO_WRITE) { + bp->b_iocmd = BIO_WRITE; + if (!useracc(bp->b_data, bp->b_bufsize, VM_PROT_READ)) { + error = EFAULT; + goto doerror; + } + } else { + bp->b_iocmd = BIO_READ; + if (!useracc(bp->b_data, bp->b_bufsize, VM_PROT_WRITE)) { + error = EFAULT; + goto doerror; + } + } + + /* Bring buffer into kernel space. */ + vmapbuf(bp); + + s = splbio(); + aiocbe->bp = bp; + bp->b_spc = (void *)aiocbe; + TAILQ_INSERT_TAIL(&aio_bufjobs, aiocbe, list); + TAILQ_INSERT_TAIL(&ki->kaio_bufqueue, aiocbe, plist); + aiocbe->jobstate = JOBST_JOBQBUF; + cb->_aiocb_private.status = cb->aio_nbytes; + num_buf_aio++; + bp->b_error = 0; + + splx(s); + + /* Perform transfer. */ + DEV_STRATEGY(bp, 0); + + notify = 0; + s = splbio(); + + /* + * If we had an error invoking the request, or an error in processing + * the request before we have returned, we process it as an error in + * transfer. Note that such an I/O error is not indicated immediately, + * but is returned using the aio_error mechanism. In this case, + * aio_suspend will return immediately. + */ + if (bp->b_error || (bp->b_ioflags & BIO_ERROR)) { + struct aiocb *job = aiocbe->uuaiocb; + + aiocbe->uaiocb._aiocb_private.status = 0; + suword(&job->_aiocb_private.status, 0); + aiocbe->uaiocb._aiocb_private.error = bp->b_error; + suword(&job->_aiocb_private.error, bp->b_error); + + ki->kaio_buffer_finished_count++; + + if (aiocbe->jobstate != JOBST_JOBBFINISHED) { + aiocbe->jobstate = JOBST_JOBBFINISHED; + aiocbe->jobflags |= AIOCBLIST_DONE; + TAILQ_REMOVE(&aio_bufjobs, aiocbe, list); + TAILQ_REMOVE(&ki->kaio_bufqueue, aiocbe, plist); + TAILQ_INSERT_TAIL(&ki->kaio_bufdone, aiocbe, plist); + notify = 1; + } + } + splx(s); + if (notify) + KNOTE(&aiocbe->klist, 0); + return 0; + +doerror: + ki->kaio_buffer_count--; + if (lj) + lj->lioj_buffer_count--; + aiocbe->bp = NULL; + relpbuf(bp, NULL); + return error; +} + +/* + * This waits/tests physio completion. + */ +int +aio_fphysio(struct proc *p, struct aiocblist *iocb, int flgwait) +{ + int s; + struct buf *bp; + int error; + + bp = iocb->bp; + + s = splbio(); + if (flgwait == 0) { + if ((bp->b_flags & B_DONE) == 0) { + splx(s); + return EINPROGRESS; + } + } + + while ((bp->b_flags & B_DONE) == 0) { + if (tsleep((caddr_t)bp, PRIBIO, "physstr", aiod_timeout)) { + if ((bp->b_flags & B_DONE) == 0) { + splx(s); + return EINPROGRESS; + } else + break; + } + } + + /* Release mapping into kernel space. */ + vunmapbuf(bp); + iocb->bp = 0; + + error = 0; + + /* Check for an error. */ + if (bp->b_ioflags & BIO_ERROR) + error = bp->b_error; + + relpbuf(bp, NULL); + return (error); +} + +/* + * Wake up aio requests that may be serviceable now. + */ +void +aio_swake(struct socket *so, struct sockbuf *sb) +{ + struct aiocblist *cb,*cbn; + struct proc *p; + struct kaioinfo *ki = NULL; + int opcode, wakecount = 0; + struct aioproclist *aiop; + + if (sb == &so->so_snd) { + opcode = LIO_WRITE; + so->so_snd.sb_flags &= ~SB_AIO; + } else { + opcode = LIO_READ; + so->so_rcv.sb_flags &= ~SB_AIO; + } + + for (cb = TAILQ_FIRST(&so->so_aiojobq); cb; cb = cbn) { + cbn = TAILQ_NEXT(cb, list); + if (opcode == cb->uaiocb.aio_lio_opcode) { + p = cb->userproc; + ki = p->p_aioinfo; + TAILQ_REMOVE(&so->so_aiojobq, cb, list); + TAILQ_REMOVE(&ki->kaio_sockqueue, cb, plist); + TAILQ_INSERT_TAIL(&aio_jobs, cb, list); + TAILQ_INSERT_TAIL(&ki->kaio_jobqueue, cb, plist); + wakecount++; + if (cb->jobstate != JOBST_JOBQGLOBAL) + panic("invalid queue value"); + } + } + + while (wakecount--) { + if ((aiop = TAILQ_FIRST(&aio_freeproc)) != 0) { + TAILQ_REMOVE(&aio_freeproc, aiop, list); + TAILQ_INSERT_TAIL(&aio_activeproc, aiop, list); + aiop->aioprocflags &= ~AIOP_FREE; + wakeup(aiop->aioproc); + } + } +} + +/* + * Queue a new AIO request. Choosing either the threaded or direct physio VCHR + * technique is done in this code. + */ +static int +_aio_aqueue(struct proc *p, struct aiocb *job, struct aio_liojob *lj, int type) +{ + struct filedesc *fdp; + struct file *fp; + unsigned int fd; + struct socket *so; + int s; + int error = 0; + int opcode; + struct aiocblist *aiocbe; + struct aioproclist *aiop; + struct kaioinfo *ki; + + if ((aiocbe = TAILQ_FIRST(&aio_freejobs)) != NULL) + TAILQ_REMOVE(&aio_freejobs, aiocbe, list); + else + aiocbe = zalloc (aiocb_zone); + + aiocbe->inputcharge = 0; + aiocbe->outputcharge = 0; + SLIST_INIT(&aiocbe->klist); + + suword(&job->_aiocb_private.status, -1); + suword(&job->_aiocb_private.error, 0); + suword(&job->_aiocb_private.kernelinfo, -1); + + error = copyin((caddr_t)job, (caddr_t) &aiocbe->uaiocb, sizeof + aiocbe->uaiocb); + if (error) { + suword(&job->_aiocb_private.error, error); + + TAILQ_INSERT_HEAD(&aio_freejobs, aiocbe, list); + return error; + } + + /* Save userspace address of the job info. */ + aiocbe->uuaiocb = job; + + /* Get the opcode. */ + if (type != LIO_NOP) + aiocbe->uaiocb.aio_lio_opcode = type; + opcode = aiocbe->uaiocb.aio_lio_opcode; + + /* Get the fd info for process. */ + fdp = p->p_fd; + + /* + * Range check file descriptor. + */ + fd = aiocbe->uaiocb.aio_fildes; + if (fd >= fdp->fd_nfiles) { + TAILQ_INSERT_HEAD(&aio_freejobs, aiocbe, list); + if (type == 0) + suword(&job->_aiocb_private.error, EBADF); + return EBADF; + } + + fp = aiocbe->fd_file = fdp->fd_ofiles[fd]; + if ((fp == NULL) || ((opcode == LIO_WRITE) && ((fp->f_flag & FWRITE) == + 0))) { + TAILQ_INSERT_HEAD(&aio_freejobs, aiocbe, list); + if (type == 0) + suword(&job->_aiocb_private.error, EBADF); + return EBADF; + } + + if (aiocbe->uaiocb.aio_offset == -1LL) { + TAILQ_INSERT_HEAD(&aio_freejobs, aiocbe, list); + if (type == 0) + suword(&job->_aiocb_private.error, EINVAL); + return EINVAL; + } + + error = suword(&job->_aiocb_private.kernelinfo, jobrefid); + if (error) { + TAILQ_INSERT_HEAD(&aio_freejobs, aiocbe, list); + if (type == 0) + suword(&job->_aiocb_private.error, EINVAL); + return error; + } + + aiocbe->uaiocb._aiocb_private.kernelinfo = (void *)(intptr_t)jobrefid; + if (jobrefid == LONG_MAX) + jobrefid = 1; + else + jobrefid++; + + if (opcode == LIO_NOP) { + TAILQ_INSERT_HEAD(&aio_freejobs, aiocbe, list); + if (type == 0) { + suword(&job->_aiocb_private.error, 0); + suword(&job->_aiocb_private.status, 0); + suword(&job->_aiocb_private.kernelinfo, 0); + } + return 0; + } + + if ((opcode != LIO_READ) && (opcode != LIO_WRITE)) { + TAILQ_INSERT_HEAD(&aio_freejobs, aiocbe, list); + if (type == 0) { + suword(&job->_aiocb_private.status, 0); + suword(&job->_aiocb_private.error, EINVAL); + } + return EINVAL; + } + + /* + * XXX + * Figure out how to do this properly. This currently won't + * work on the alpha, since we're passing in a pointer via + * aio_lio_opcode, which is an int. + */ + { + struct kevent kev, *kevp; + struct kqueue *kq; + + kevp = (struct kevent *)job->aio_lio_opcode; + if (kevp == NULL) + goto no_kqueue; + + error = copyin((caddr_t)kevp, (caddr_t)&kev, sizeof(kev)); + if (error) + goto aqueue_fail; + + if ((u_int)kev.ident >= fdp->fd_nfiles || + (fp = fdp->fd_ofiles[kev.ident]) == NULL || + (fp->f_type != DTYPE_KQUEUE)) { + error = EBADF; + goto aqueue_fail; + } + kq = (struct kqueue *)fp->f_data; + kev.ident = (u_long)aiocbe; + kev.filter = EVFILT_AIO; + kev.flags = EV_ADD | EV_ENABLE | EV_FLAG1; + error = kqueue_register(kq, &kev, p); +aqueue_fail: + if (error) { + TAILQ_INSERT_HEAD(&aio_freejobs, aiocbe, list); + if (type == 0) + suword(&job->_aiocb_private.error, error); + return (error); + } +no_kqueue: + } + + suword(&job->_aiocb_private.error, EINPROGRESS); + aiocbe->uaiocb._aiocb_private.error = EINPROGRESS; + aiocbe->userproc = p; + aiocbe->jobflags = 0; + aiocbe->lio = lj; + ki = p->p_aioinfo; + + if (fp->f_type == DTYPE_SOCKET) { + /* + * Alternate queueing for socket ops: Reach down into the + * descriptor to get the socket data. Then check to see if the + * socket is ready to be read or written (based on the requested + * operation). + * + * If it is not ready for io, then queue the aiocbe on the + * socket, and set the flags so we get a call when sbnotify() + * happens. + */ + so = (struct socket *)fp->f_data; + s = splnet(); + if (((opcode == LIO_READ) && (!soreadable(so))) || ((opcode == + LIO_WRITE) && (!sowriteable(so)))) { + TAILQ_INSERT_TAIL(&so->so_aiojobq, aiocbe, list); + TAILQ_INSERT_TAIL(&ki->kaio_sockqueue, aiocbe, plist); + if (opcode == LIO_READ) + so->so_rcv.sb_flags |= SB_AIO; + else + so->so_snd.sb_flags |= SB_AIO; + aiocbe->jobstate = JOBST_JOBQGLOBAL; /* XXX */ + ki->kaio_queue_count++; + num_queue_count++; + splx(s); + return 0; + } + splx(s); + } + + if ((error = aio_qphysio(p, aiocbe)) == 0) + return 0; + else if (error > 0) { + suword(&job->_aiocb_private.status, 0); + aiocbe->uaiocb._aiocb_private.error = error; + suword(&job->_aiocb_private.error, error); + return error; + } + + /* No buffer for daemon I/O. */ + aiocbe->bp = NULL; + + ki->kaio_queue_count++; + if (lj) + lj->lioj_queue_count++; + s = splnet(); + TAILQ_INSERT_TAIL(&ki->kaio_jobqueue, aiocbe, plist); + TAILQ_INSERT_TAIL(&aio_jobs, aiocbe, list); + splx(s); + aiocbe->jobstate = JOBST_JOBQGLOBAL; + + num_queue_count++; + error = 0; + + /* + * If we don't have a free AIO process, and we are below our quota, then + * start one. Otherwise, depend on the subsequent I/O completions to + * pick-up this job. If we don't sucessfully create the new process + * (thread) due to resource issues, we return an error for now (EAGAIN), + * which is likely not the correct thing to do. + */ +retryproc: + s = splnet(); + if ((aiop = TAILQ_FIRST(&aio_freeproc)) != NULL) { + TAILQ_REMOVE(&aio_freeproc, aiop, list); + TAILQ_INSERT_TAIL(&aio_activeproc, aiop, list); + aiop->aioprocflags &= ~AIOP_FREE; + wakeup(aiop->aioproc); + } else if (((num_aio_resv_start + num_aio_procs) < max_aio_procs) && + ((ki->kaio_active_count + num_aio_resv_start) < + ki->kaio_maxactive_count)) { + num_aio_resv_start++; + if ((error = aio_newproc()) == 0) { + num_aio_resv_start--; + p->p_retval[0] = 0; + goto retryproc; + } + num_aio_resv_start--; + } + splx(s); + return error; +} + +/* + * This routine queues an AIO request, checking for quotas. + */ +static int +aio_aqueue(struct proc *p, struct aiocb *job, int type) +{ + struct kaioinfo *ki; + + if (p->p_aioinfo == NULL) + aio_init_aioinfo(p); + + if (num_queue_count >= max_queue_count) + return EAGAIN; + + ki = p->p_aioinfo; + if (ki->kaio_queue_count >= ki->kaio_qallowed_count) + return EAGAIN; + + return _aio_aqueue(p, job, NULL, type); +} + +/* + * Support the aio_return system call, as a side-effect, kernel resources are + * released. + */ +int +aio_return(struct proc *p, struct aio_return_args *uap) +{ +#ifndef VFS_AIO + return ENOSYS; +#else + int s; + int jobref; + struct aiocblist *cb, *ncb; + struct aiocb *ujob; + struct kaioinfo *ki; + + ki = p->p_aioinfo; + if (ki == NULL) + return EINVAL; + + ujob = uap->aiocbp; + + jobref = fuword(&ujob->_aiocb_private.kernelinfo); + if (jobref == -1 || jobref == 0) + return EINVAL; + + s = splnet(); + for (cb = TAILQ_FIRST(&ki->kaio_jobdone); cb; cb = TAILQ_NEXT(cb, + plist)) { + if (((intptr_t) cb->uaiocb._aiocb_private.kernelinfo) == + jobref) { + splx(s); + if (ujob == cb->uuaiocb) { + p->p_retval[0] = + cb->uaiocb._aiocb_private.status; + } else + p->p_retval[0] = EFAULT; + if (cb->uaiocb.aio_lio_opcode == LIO_WRITE) { + curproc->p_stats->p_ru.ru_oublock += + cb->outputcharge; + cb->outputcharge = 0; + } else if (cb->uaiocb.aio_lio_opcode == LIO_READ) { + curproc->p_stats->p_ru.ru_inblock += + cb->inputcharge; + cb->inputcharge = 0; + } + aio_free_entry(cb); + return 0; + } + } + splx(s); + + s = splbio(); + for (cb = TAILQ_FIRST(&ki->kaio_bufdone); cb; cb = ncb) { + ncb = TAILQ_NEXT(cb, plist); + if (((intptr_t) cb->uaiocb._aiocb_private.kernelinfo) + == jobref) { + splx(s); + if (ujob == cb->uuaiocb) { + p->p_retval[0] = + cb->uaiocb._aiocb_private.status; + } else + p->p_retval[0] = EFAULT; + aio_free_entry(cb); + return 0; + } + } + splx(s); + + return (EINVAL); +#endif /* VFS_AIO */ +} + +/* + * Allow a process to wakeup when any of the I/O requests are completed. + */ +int +aio_suspend(struct proc *p, struct aio_suspend_args *uap) +{ +#ifndef VFS_AIO + return ENOSYS; +#else + struct timeval atv; + struct timespec ts; + struct aiocb *const *cbptr, *cbp; + struct kaioinfo *ki; + struct aiocblist *cb; + int i; + int njoblist; + int error, s, timo; + int *ijoblist; + struct aiocb **ujoblist; + + if (uap->nent >= AIO_LISTIO_MAX) + return EINVAL; + + timo = 0; + if (uap->timeout) { + /* Get timespec struct. */ + if ((error = copyin(uap->timeout, &ts, sizeof(ts))) != 0) + return error; + + if (ts.tv_nsec < 0 || ts.tv_nsec >= 1000000000) + return (EINVAL); + + TIMESPEC_TO_TIMEVAL(&atv, &ts); + if (itimerfix(&atv)) + return (EINVAL); + timo = tvtohz(&atv); + } + + ki = p->p_aioinfo; + if (ki == NULL) + return EAGAIN; + + njoblist = 0; + ijoblist = zalloc(aiol_zone); + ujoblist = zalloc(aiol_zone); + cbptr = uap->aiocbp; + + for (i = 0; i < uap->nent; i++) { + cbp = (struct aiocb *)(intptr_t)fuword((caddr_t)&cbptr[i]); + if (cbp == 0) + continue; + ujoblist[njoblist] = cbp; + ijoblist[njoblist] = fuword(&cbp->_aiocb_private.kernelinfo); + njoblist++; + } + + if (njoblist == 0) { + zfree(aiol_zone, ijoblist); + zfree(aiol_zone, ujoblist); + return 0; + } + + error = 0; + for (;;) { + for (cb = TAILQ_FIRST(&ki->kaio_jobdone); cb; cb = + TAILQ_NEXT(cb, plist)) { + for (i = 0; i < njoblist; i++) { + if (((intptr_t) + cb->uaiocb._aiocb_private.kernelinfo) == + ijoblist[i]) { + if (ujoblist[i] != cb->uuaiocb) + error = EINVAL; + zfree(aiol_zone, ijoblist); + zfree(aiol_zone, ujoblist); + return error; + } + } + } + + s = splbio(); + for (cb = TAILQ_FIRST(&ki->kaio_bufdone); cb; cb = + TAILQ_NEXT(cb, plist)) { + for (i = 0; i < njoblist; i++) { + if (((intptr_t) + cb->uaiocb._aiocb_private.kernelinfo) == + ijoblist[i]) { + splx(s); + if (ujoblist[i] != cb->uuaiocb) + error = EINVAL; + zfree(aiol_zone, ijoblist); + zfree(aiol_zone, ujoblist); + return error; + } + } + } + + ki->kaio_flags |= KAIO_WAKEUP; + error = tsleep(p, PRIBIO | PCATCH, "aiospn", timo); + splx(s); + + if (error == ERESTART || error == EINTR) { + zfree(aiol_zone, ijoblist); + zfree(aiol_zone, ujoblist); + return EINTR; + } else if (error == EWOULDBLOCK) { + zfree(aiol_zone, ijoblist); + zfree(aiol_zone, ujoblist); + return EAGAIN; + } + } + +/* NOTREACHED */ + return EINVAL; +#endif /* VFS_AIO */ +} + +/* + * aio_cancel cancels any non-physio aio operations not currently in + * progress. + */ +int +aio_cancel(struct proc *p, struct aio_cancel_args *uap) +{ +#ifndef VFS_AIO + return ENOSYS; +#else + struct kaioinfo *ki; + struct aiocblist *cbe, *cbn; + struct file *fp; + struct filedesc *fdp; + struct socket *so; + struct proc *po; + int s,error; + int cancelled=0; + int notcancelled=0; + struct vnode *vp; + + fdp = p->p_fd; + + fp = fdp->fd_ofiles[uap->fd]; + + if (fp == NULL) { + return EBADF; + } + + if (fp->f_type == DTYPE_VNODE) { + vp = (struct vnode *)fp->f_data; + + if (vn_isdisk(vp,&error)) { + p->p_retval[0] = AIO_NOTCANCELED; + return 0; + } + } else if (fp->f_type == DTYPE_SOCKET) { + so = (struct socket *)fp->f_data; + + s = splnet(); + + for (cbe = TAILQ_FIRST(&so->so_aiojobq); cbe; cbe = cbn) { + cbn = TAILQ_NEXT(cbe, list); + if ((uap->aiocbp == NULL) || + (uap->aiocbp == cbe->uuaiocb) ) { + po = cbe->userproc; + ki = po->p_aioinfo; + TAILQ_REMOVE(&so->so_aiojobq, cbe, list); + TAILQ_REMOVE(&ki->kaio_sockqueue, cbe, plist); + TAILQ_INSERT_TAIL(&ki->kaio_jobdone, cbe, plist); + if (ki->kaio_flags & KAIO_WAKEUP) { + wakeup(po); + } + cbe->jobstate = JOBST_JOBFINISHED; + cbe->uaiocb._aiocb_private.status=-1; + cbe->uaiocb._aiocb_private.error=ECANCELED; + cancelled++; +/* XXX cancelled, knote? */ + if (cbe->uaiocb.aio_sigevent.sigev_notify == + SIGEV_SIGNAL) + psignal(cbe->userproc, cbe->uaiocb.aio_sigevent.sigev_signo); + if (uap->aiocbp) + break; + } + } + + splx(s); + + if ((cancelled) && (uap->aiocbp)) { + p->p_retval[0] = AIO_CANCELED; + return 0; + } + + } + + ki=p->p_aioinfo; + + s = splnet(); + + for (cbe = TAILQ_FIRST(&ki->kaio_jobqueue); cbe; cbe = cbn) { + cbn = TAILQ_NEXT(cbe, plist); + + if ((uap->fd == cbe->uaiocb.aio_fildes) && + ((uap->aiocbp == NULL ) || + (uap->aiocbp == cbe->uuaiocb))) { + + if (cbe->jobstate == JOBST_JOBQGLOBAL) { + TAILQ_REMOVE(&aio_jobs, cbe, list); + TAILQ_REMOVE(&ki->kaio_jobqueue, cbe, plist); + TAILQ_INSERT_TAIL(&ki->kaio_jobdone, cbe, + plist); + cancelled++; + ki->kaio_queue_finished_count++; + cbe->jobstate = JOBST_JOBFINISHED; + cbe->uaiocb._aiocb_private.status = -1; + cbe->uaiocb._aiocb_private.error = ECANCELED; +/* XXX cancelled, knote? */ + if (cbe->uaiocb.aio_sigevent.sigev_notify == + SIGEV_SIGNAL) + psignal(cbe->userproc, cbe->uaiocb.aio_sigevent.sigev_signo); + } else { + notcancelled++; + } + } + } + + splx(s); + + + if (notcancelled) { + p->p_retval[0] = AIO_NOTCANCELED; + return 0; + } + + if (cancelled) { + p->p_retval[0] = AIO_CANCELED; + return 0; + } + + p->p_retval[0] = AIO_ALLDONE; + + return 0; +#endif /* VFS_AIO */ +} + +/* + * aio_error is implemented in the kernel level for compatibility purposes only. + * For a user mode async implementation, it would be best to do it in a userland + * subroutine. + */ +int +aio_error(struct proc *p, struct aio_error_args *uap) +{ +#ifndef VFS_AIO + return ENOSYS; +#else + int s; + struct aiocblist *cb; + struct kaioinfo *ki; + int jobref; + + ki = p->p_aioinfo; + if (ki == NULL) + return EINVAL; + + jobref = fuword(&uap->aiocbp->_aiocb_private.kernelinfo); + if ((jobref == -1) || (jobref == 0)) + return EINVAL; + + for (cb = TAILQ_FIRST(&ki->kaio_jobdone); cb; cb = TAILQ_NEXT(cb, + plist)) { + if (((intptr_t)cb->uaiocb._aiocb_private.kernelinfo) == + jobref) { + p->p_retval[0] = cb->uaiocb._aiocb_private.error; + return 0; + } + } + + s = splnet(); + + for (cb = TAILQ_FIRST(&ki->kaio_jobqueue); cb; cb = TAILQ_NEXT(cb, + plist)) { + if (((intptr_t)cb->uaiocb._aiocb_private.kernelinfo) == + jobref) { + p->p_retval[0] = EINPROGRESS; + splx(s); + return 0; + } + } + + for (cb = TAILQ_FIRST(&ki->kaio_sockqueue); cb; cb = TAILQ_NEXT(cb, + plist)) { + if (((intptr_t)cb->uaiocb._aiocb_private.kernelinfo) == + jobref) { + p->p_retval[0] = EINPROGRESS; + splx(s); + return 0; + } + } + splx(s); + + s = splbio(); + for (cb = TAILQ_FIRST(&ki->kaio_bufdone); cb; cb = TAILQ_NEXT(cb, + plist)) { + if (((intptr_t)cb->uaiocb._aiocb_private.kernelinfo) == + jobref) { + p->p_retval[0] = cb->uaiocb._aiocb_private.error; + splx(s); + return 0; + } + } + + for (cb = TAILQ_FIRST(&ki->kaio_bufqueue); cb; cb = TAILQ_NEXT(cb, + plist)) { + if (((intptr_t)cb->uaiocb._aiocb_private.kernelinfo) == + jobref) { + p->p_retval[0] = EINPROGRESS; + splx(s); + return 0; + } + } + splx(s); + +#if (0) + /* + * Hack for lio. + */ + status = fuword(&uap->aiocbp->_aiocb_private.status); + if (status == -1) + return fuword(&uap->aiocbp->_aiocb_private.error); +#endif + return EINVAL; +#endif /* VFS_AIO */ +} + +int +aio_read(struct proc *p, struct aio_read_args *uap) +{ +#ifndef VFS_AIO + return ENOSYS; +#else + struct filedesc *fdp; + struct file *fp; + struct uio auio; + struct iovec aiov; + unsigned int fd; + int cnt; + struct aiocb iocb; + int error, pmodes; + + pmodes = fuword(&uap->aiocbp->_aiocb_private.privatemodes); + if ((pmodes & AIO_PMODE_SYNC) == 0) + return aio_aqueue(p, (struct aiocb *)uap->aiocbp, LIO_READ); + + /* Get control block. */ + if ((error = copyin((caddr_t)uap->aiocbp, (caddr_t)&iocb, sizeof iocb)) + != 0) + return error; + + /* Get the fd info for process. */ + fdp = p->p_fd; + + /* + * Range check file descriptor. + */ + fd = iocb.aio_fildes; + if (fd >= fdp->fd_nfiles) + return EBADF; + fp = fdp->fd_ofiles[fd]; + if ((fp == NULL) || ((fp->f_flag & FREAD) == 0)) + return EBADF; + if (iocb.aio_offset == -1LL) + return EINVAL; + + auio.uio_resid = iocb.aio_nbytes; + if (auio.uio_resid < 0) + return (EINVAL); + + /* + * Process sync simply -- queue async request. + */ + if ((iocb._aiocb_private.privatemodes & AIO_PMODE_SYNC) == 0) + return aio_aqueue(p, (struct aiocb *)uap->aiocbp, LIO_READ); + + aiov.iov_base = (void *)iocb.aio_buf; + aiov.iov_len = iocb.aio_nbytes; + + auio.uio_iov = &aiov; + auio.uio_iovcnt = 1; + auio.uio_offset = iocb.aio_offset; + auio.uio_rw = UIO_READ; + auio.uio_segflg = UIO_USERSPACE; + auio.uio_procp = p; + + cnt = iocb.aio_nbytes; + error = fo_read(fp, &auio, fp->f_cred, FOF_OFFSET, p); + if (error && (auio.uio_resid != cnt) && (error == ERESTART || error == + EINTR || error == EWOULDBLOCK)) + error = 0; + cnt -= auio.uio_resid; + p->p_retval[0] = cnt; + return error; +#endif /* VFS_AIO */ +} + +int +aio_write(struct proc *p, struct aio_write_args *uap) +{ +#ifndef VFS_AIO + return ENOSYS; +#else + struct filedesc *fdp; + struct file *fp; + struct uio auio; + struct iovec aiov; + unsigned int fd; + int cnt; + struct aiocb iocb; + int error; + int pmodes; + + /* + * Process sync simply -- queue async request. + */ + pmodes = fuword(&uap->aiocbp->_aiocb_private.privatemodes); + if ((pmodes & AIO_PMODE_SYNC) == 0) + return aio_aqueue(p, (struct aiocb *)uap->aiocbp, LIO_WRITE); + + if ((error = copyin((caddr_t)uap->aiocbp, (caddr_t)&iocb, sizeof iocb)) + != 0) + return error; + + /* Get the fd info for process. */ + fdp = p->p_fd; + + /* + * Range check file descriptor. + */ + fd = iocb.aio_fildes; + if (fd >= fdp->fd_nfiles) + return EBADF; + fp = fdp->fd_ofiles[fd]; + if ((fp == NULL) || ((fp->f_flag & FWRITE) == 0)) + return EBADF; + if (iocb.aio_offset == -1LL) + return EINVAL; + + aiov.iov_base = (void *)iocb.aio_buf; + aiov.iov_len = iocb.aio_nbytes; + auio.uio_iov = &aiov; + auio.uio_iovcnt = 1; + auio.uio_offset = iocb.aio_offset; + + auio.uio_resid = iocb.aio_nbytes; + if (auio.uio_resid < 0) + return (EINVAL); + + auio.uio_rw = UIO_WRITE; + auio.uio_segflg = UIO_USERSPACE; + auio.uio_procp = p; + + cnt = iocb.aio_nbytes; + error = fo_write(fp, &auio, fp->f_cred, FOF_OFFSET, p); + if (error) { + if (auio.uio_resid != cnt) { + if (error == ERESTART || error == EINTR || error == + EWOULDBLOCK) + error = 0; + if (error == EPIPE) + psignal(p, SIGPIPE); + } + } + cnt -= auio.uio_resid; + p->p_retval[0] = cnt; + return error; +#endif /* VFS_AIO */ +} + +int +lio_listio(struct proc *p, struct lio_listio_args *uap) +{ +#ifndef VFS_AIO + return ENOSYS; +#else + int nent, nentqueued; + struct aiocb *iocb, * const *cbptr; + struct aiocblist *cb; + struct kaioinfo *ki; + struct aio_liojob *lj; + int error, runningcode; + int nerror; + int i; + int s; + + if ((uap->mode != LIO_NOWAIT) && (uap->mode != LIO_WAIT)) + return EINVAL; + + nent = uap->nent; + if (nent > AIO_LISTIO_MAX) + return EINVAL; + + if (p->p_aioinfo == NULL) + aio_init_aioinfo(p); + + if ((nent + num_queue_count) > max_queue_count) + return EAGAIN; + + ki = p->p_aioinfo; + if ((nent + ki->kaio_queue_count) > ki->kaio_qallowed_count) + return EAGAIN; + + lj = zalloc(aiolio_zone); + if (!lj) + return EAGAIN; + + lj->lioj_flags = 0; + lj->lioj_buffer_count = 0; + lj->lioj_buffer_finished_count = 0; + lj->lioj_queue_count = 0; + lj->lioj_queue_finished_count = 0; + lj->lioj_ki = ki; + TAILQ_INSERT_TAIL(&ki->kaio_liojoblist, lj, lioj_list); + + /* + * Setup signal. + */ + if (uap->sig && (uap->mode == LIO_NOWAIT)) { + error = copyin(uap->sig, &lj->lioj_signal, + sizeof(lj->lioj_signal)); + if (error) + return error; + lj->lioj_flags |= LIOJ_SIGNAL; + lj->lioj_flags &= ~LIOJ_SIGNAL_POSTED; + } else + lj->lioj_flags &= ~LIOJ_SIGNAL; + + /* + * Get pointers to the list of I/O requests. + */ + nerror = 0; + nentqueued = 0; + cbptr = uap->acb_list; + for (i = 0; i < uap->nent; i++) { + iocb = (struct aiocb *)(intptr_t)fuword((caddr_t)&cbptr[i]); + if (((intptr_t)iocb != -1) && ((intptr_t)iocb != NULL)) { + error = _aio_aqueue(p, iocb, lj, 0); + if (error == 0) + nentqueued++; + else + nerror++; + } + } + + /* + * If we haven't queued any, then just return error. + */ + if (nentqueued == 0) + return 0; + + /* + * Calculate the appropriate error return. + */ + runningcode = 0; + if (nerror) + runningcode = EIO; + + if (uap->mode == LIO_WAIT) { + int command, found, jobref; + + for (;;) { + found = 0; + for (i = 0; i < uap->nent; i++) { + /* + * Fetch address of the control buf pointer in + * user space. + */ + iocb = (struct aiocb *)(intptr_t)fuword((caddr_t)&cbptr[i]); + if (((intptr_t)iocb == -1) || ((intptr_t)iocb + == 0)) + continue; + + /* + * Fetch the associated command from user space. + */ + command = fuword(&iocb->aio_lio_opcode); + if (command == LIO_NOP) { + found++; + continue; + } + + jobref = fuword(&iocb->_aiocb_private.kernelinfo); + + for (cb = TAILQ_FIRST(&ki->kaio_jobdone); cb; + cb = TAILQ_NEXT(cb, plist)) { + if (((intptr_t)cb->uaiocb._aiocb_private.kernelinfo) + == jobref) { + if (cb->uaiocb.aio_lio_opcode + == LIO_WRITE) { + curproc->p_stats->p_ru.ru_oublock + += + cb->outputcharge; + cb->outputcharge = 0; + } else if (cb->uaiocb.aio_lio_opcode + == LIO_READ) { + curproc->p_stats->p_ru.ru_inblock + += cb->inputcharge; + cb->inputcharge = 0; + } + found++; + break; + } + } + + s = splbio(); + for (cb = TAILQ_FIRST(&ki->kaio_bufdone); cb; + cb = TAILQ_NEXT(cb, plist)) { + if (((intptr_t)cb->uaiocb._aiocb_private.kernelinfo) + == jobref) { + found++; + break; + } + } + splx(s); + } + + /* + * If all I/Os have been disposed of, then we can + * return. + */ + if (found == nentqueued) + return runningcode; + + ki->kaio_flags |= KAIO_WAKEUP; + error = tsleep(p, PRIBIO | PCATCH, "aiospn", 0); + + if (error == EINTR) + return EINTR; + else if (error == EWOULDBLOCK) + return EAGAIN; + } + } + + return runningcode; +#endif /* VFS_AIO */ +} + +/* + * This is a wierd hack so that we can post a signal. It is safe to do so from + * a timeout routine, but *not* from an interrupt routine. + */ +static void +process_signal(void *aioj) +{ + struct aiocblist *aiocbe = aioj; + struct aio_liojob *lj = aiocbe->lio; + struct aiocb *cb = &aiocbe->uaiocb; + + if ((lj) && (lj->lioj_signal.sigev_notify == SIGEV_SIGNAL) && + (lj->lioj_queue_count == lj->lioj_queue_finished_count)) { + psignal(lj->lioj_ki->kaio_p, lj->lioj_signal.sigev_signo); + lj->lioj_flags |= LIOJ_SIGNAL_POSTED; + } + + if (cb->aio_sigevent.sigev_notify == SIGEV_SIGNAL) + psignal(aiocbe->userproc, cb->aio_sigevent.sigev_signo); +} + +/* + * Interrupt handler for physio, performs the necessary process wakeups, and + * signals. + */ +static void +aio_physwakeup(struct buf *bp) +{ + struct aiocblist *aiocbe; + struct proc *p; + struct kaioinfo *ki; + struct aio_liojob *lj; + int s; + s = splbio(); + + wakeup((caddr_t)bp); + bp->b_flags |= B_DONE; + + aiocbe = (struct aiocblist *)bp->b_spc; + if (aiocbe) { + p = bp->b_caller1; + + aiocbe->jobstate = JOBST_JOBBFINISHED; + aiocbe->uaiocb._aiocb_private.status -= bp->b_resid; + aiocbe->uaiocb._aiocb_private.error = 0; + aiocbe->jobflags |= AIOCBLIST_DONE; + + if (bp->b_ioflags & BIO_ERROR) + aiocbe->uaiocb._aiocb_private.error = bp->b_error; + + lj = aiocbe->lio; + if (lj) { + lj->lioj_buffer_finished_count++; + + /* + * wakeup/signal if all of the interrupt jobs are done. + */ + if (lj->lioj_buffer_finished_count == + lj->lioj_buffer_count) { + /* + * Post a signal if it is called for. + */ + if ((lj->lioj_flags & + (LIOJ_SIGNAL|LIOJ_SIGNAL_POSTED)) == + LIOJ_SIGNAL) { + lj->lioj_flags |= LIOJ_SIGNAL_POSTED; + timeout(process_signal, aiocbe, 0); + } + } + } + + ki = p->p_aioinfo; + if (ki) { + ki->kaio_buffer_finished_count++; + TAILQ_REMOVE(&aio_bufjobs, aiocbe, list); + TAILQ_REMOVE(&ki->kaio_bufqueue, aiocbe, plist); + TAILQ_INSERT_TAIL(&ki->kaio_bufdone, aiocbe, plist); + + KNOTE(&aiocbe->klist, 0); + /* Do the wakeup. */ + if (ki->kaio_flags & (KAIO_RUNDOWN|KAIO_WAKEUP)) { + ki->kaio_flags &= ~KAIO_WAKEUP; + wakeup(p); + } + } + + if (aiocbe->uaiocb.aio_sigevent.sigev_notify == SIGEV_SIGNAL) + timeout(process_signal, aiocbe, 0); + } + splx(s); +} + +int +aio_waitcomplete(struct proc *p, struct aio_waitcomplete_args *uap) +{ +#ifndef VFS_AIO + return ENOSYS; +#else + struct timeval atv; + struct timespec ts; + struct aiocb **cbptr; + struct kaioinfo *ki; + struct aiocblist *cb = NULL; + int error, s, timo; + + suword(uap->aiocbp, (int)NULL); + + timo = 0; + if (uap->timeout) { + /* Get timespec struct. */ + error = copyin((caddr_t)uap->timeout, (caddr_t)&ts, + sizeof(ts)); + if (error) + return error; + + if ((ts.tv_nsec < 0) || (ts.tv_nsec >= 1000000000)) + return (EINVAL); + + TIMESPEC_TO_TIMEVAL(&atv, &ts); + if (itimerfix(&atv)) + return (EINVAL); + timo = tvtohz(&atv); + } + + ki = p->p_aioinfo; + if (ki == NULL) + return EAGAIN; + + cbptr = uap->aiocbp; + + for (;;) { + if ((cb = TAILQ_FIRST(&ki->kaio_jobdone)) != 0) { + suword(uap->aiocbp, (int)cb->uuaiocb); + p->p_retval[0] = cb->uaiocb._aiocb_private.status; + if (cb->uaiocb.aio_lio_opcode == LIO_WRITE) { + curproc->p_stats->p_ru.ru_oublock += + cb->outputcharge; + cb->outputcharge = 0; + } else if (cb->uaiocb.aio_lio_opcode == LIO_READ) { + curproc->p_stats->p_ru.ru_inblock += + cb->inputcharge; + cb->inputcharge = 0; + } + aio_free_entry(cb); + return cb->uaiocb._aiocb_private.error; + } + + s = splbio(); + if ((cb = TAILQ_FIRST(&ki->kaio_bufdone)) != 0 ) { + splx(s); + suword(uap->aiocbp, (int)cb->uuaiocb); + p->p_retval[0] = cb->uaiocb._aiocb_private.status; + aio_free_entry(cb); + return cb->uaiocb._aiocb_private.error; + } + + ki->kaio_flags |= KAIO_WAKEUP; + error = tsleep(p, PRIBIO | PCATCH, "aiowc", timo); + splx(s); + + if (error == ERESTART) + return EINTR; + else if (error < 0) + return error; + else if (error == EINTR) + return EINTR; + else if (error == EWOULDBLOCK) + return EAGAIN; + } +#endif /* VFS_AIO */ +} + +static int +filt_aioattach(struct knote *kn) +{ + struct aiocblist *aiocbe = (struct aiocblist *)kn->kn_id; + + /* + * The aiocbe pointer must be validated before using it, so + * registration is restricted to the kernel; the user cannot + * set EV_FLAG1. + */ + if ((kn->kn_flags & EV_FLAG1) == 0) + return (EPERM); + kn->kn_flags &= ~EV_FLAG1; + + SLIST_INSERT_HEAD(&aiocbe->klist, kn, kn_selnext); + + return (0); +} + +static void +filt_aiodetach(struct knote *kn) +{ + struct aiocblist *aiocbe = (struct aiocblist *)kn->kn_id; + int s = splhigh(); /* XXX no clue, so overkill */ + + SLIST_REMOVE(&aiocbe->klist, kn, knote, kn_selnext); + splx(s); +} + +/*ARGSUSED*/ +static int +filt_aio(struct knote *kn, long hint) +{ + struct aiocblist *aiocbe = (struct aiocblist *)kn->kn_id; + + kn->kn_data = 0; /* XXX data returned? */ + if (aiocbe->jobstate != JOBST_JOBFINISHED) + return (0); + kn->kn_flags |= EV_EOF; + return (1); +} |