diff options
Diffstat (limited to 'sys/i386/pci/ncrreg.h')
| -rw-r--r-- | sys/i386/pci/ncrreg.h | 547 |
1 files changed, 0 insertions, 547 deletions
diff --git a/sys/i386/pci/ncrreg.h b/sys/i386/pci/ncrreg.h deleted file mode 100644 index 1a22aee..0000000 --- a/sys/i386/pci/ncrreg.h +++ /dev/null @@ -1,547 +0,0 @@ -/************************************************************************** -** -** $Id: ncrreg.h,v 2.3 94/10/09 21:10:34 wolf Oct11 $ -** -** Device driver for the NCR 53C810 PCI-SCSI-Controller. -** -** 386bsd / FreeBSD / NetBSD -** -**------------------------------------------------------------------------- -** -** Written for 386bsd and FreeBSD by -** wolf@dentaro.gun.de Wolfgang Stanglmeier -** se@mi.Uni-Koeln.de Stefan Esser -** -** Ported to NetBSD by -** mycroft@gnu.ai.mit.edu -** -**------------------------------------------------------------------------- -** -** Copyright (c) 1994 Wolfgang Stanglmeier. All rights reserved. -** -** Redistribution and use in source and binary forms, with or without -** modification, are permitted provided that the following conditions -** are met: -** 1. Redistributions of source code must retain the above copyright -** notice, this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright -** notice, this list of conditions and the following disclaimer in the -** documentation and/or other materials provided with the distribution. -** 3. The name of the author may not be used to endorse or promote products -** derived from this software without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -*************************************************************************** -*/ - -#ifndef __NCR_REG_H__ -#define __NCR_REG_H__ - - -/*----------------------------------------------------------------- -** -** The ncr 53c810 register structure. -** -**----------------------------------------------------------------- -*/ - -struct ncr_reg { -/*00*/ u_char nc_scntl0; /* full arb., ena parity, par->ATN */ - -/*01*/ u_char nc_scntl1; /* no reset */ - #define ISCON 0x10 /* connected to scsi */ - #define CRST 0x08 /* force reset */ - -/*02*/ u_char nc_scntl2; /* no disconnect expected */ - #define SDU 0x80 /* cmd: disconnect will raise error */ - #define CHM 0x40 /* sta: chained mode */ - #define WSS 0x08 /* sta: wide scsi send [W]*/ - #define WSR 0x01 /* sta: wide scsi received [W]*/ - -/*03*/ u_char nc_scntl3; /* cnf system clock dependent */ - #define EWS 0x08 /* cmd: enable wide scsi [W]*/ - -/*04*/ u_char nc_scid; /* cnf host adapter scsi address */ - #define RRE 0x40 /* r/w:e enable response to resel. */ - #define SRE 0x20 /* r/w:e enable response to select */ - -/*05*/ u_char nc_sxfer; /* ### Sync speed and count */ - -/*06*/ u_char nc_sdid; /* ### Destination-ID */ - -/*07*/ u_char nc_gpreg; /* ??? IO-Pins */ - -/*08*/ u_char nc_sfbr; /* ### First byte in phase */ - -/*09*/ u_char nc_socl; - #define CREQ 0x80 /* r/w: SCSI-REQ */ - #define CACK 0x40 /* r/w: SCSI-ACK */ - #define CBSY 0x20 /* r/w: SCSI-BSY */ - #define CSEL 0x10 /* r/w: SCSI-SEL */ - #define CATN 0x08 /* r/w: SCSI-ATN */ - #define CMSG 0x04 /* r/w: SCSI-MSG */ - #define CC_D 0x02 /* r/w: SCSI-C_D */ - #define CI_O 0x01 /* r/w: SCSI-I_O */ - -/*0a*/ u_char nc_ssid; - -/*0b*/ u_char nc_sbcl; - -/*0c*/ u_char nc_dstat; - #define DFE 0x80 /* sta: dma fifo empty */ - #define MDPE 0x40 /* int: master data parity error */ - #define BF 0x20 /* int: script: bus fault */ - #define ABRT 0x10 /* int: script: command aborted */ - #define SSI 0x08 /* int: script: single step */ - #define SIR 0x04 /* int: script: interrupt instruct. */ - #define IID 0x01 /* int: script: illegal instruct. */ - -/*0d*/ u_char nc_sstat0; - #define ILF 0x80 /* sta: data in SIDL register lsb */ - #define ORF 0x40 /* sta: data in SODR register lsb */ - #define OLF 0x20 /* sta: data in SODL register lsb */ - #define AIP 0x10 /* sta: arbitration in progress */ - #define LOA 0x08 /* sta: arbitration lost */ - #define WOA 0x04 /* sta: arbitration won */ - #define IRST 0x02 /* sta: scsi reset signal */ - #define SDP 0x01 /* sta: scsi parity signal */ - -/*0e*/ u_char nc_sstat1; - #define FF3210 0xf0 /* sta: bytes in the scsi fifo */ - -/*0f*/ u_char nc_sstat2; - #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/ - #define ORF1 0x40 /* sta: data in SODR register msb[W]*/ - #define OLF1 0x20 /* sta: data in SODL register msb[W]*/ - -/*10*/ u_long nc_dsa; /* --> Base page */ - -/*14*/ u_char nc_istat; /* --> Main Command and status */ - #define CABRT 0x80 /* cmd: abort current operation */ - #define SRST 0x40 /* mod: reset chip */ - #define SIGP 0x20 /* r/w: message from host to ncr */ - #define SEM 0x10 /* r/w: message between host + ncr */ - #define CON 0x08 /* sta: connected to scsi */ - #define INTF 0x04 /* sta: int on the fly (reset by wr)*/ - #define SIP 0x02 /* sta: scsi-interrupt */ - #define DIP 0x01 /* sta: host/script interrupt */ - -/*15*/ u_char nc_15_; -/*16*/ u_char nc_16_; -/*17*/ u_char nc_17_; - -/*18*/ u_char nc_ctest0; -/*19*/ u_char nc_ctest1; - -/*1a*/ u_char nc_ctest2; - #define CSIGP 0x40 - -/*1b*/ u_char nc_ctest3; - #define CLF 0x04 /* clear scsi fifo */ - -/*1c*/ u_long nc_temp; /* ### Temporary stack */ - -/*20*/ u_char nc_dfifo; -/*21*/ u_char nc_ctest4; -/*22*/ u_char nc_ctest5; -/*23*/ u_char nc_ctest6; - -/*24*/ u_long nc_dbc; /* ### Byte count and command */ -/*28*/ u_long nc_dnad; /* ### Next command register */ -/*2c*/ u_long nc_dsp; /* --> Script Pointer */ -/*30*/ u_long nc_dsps; /* --> Script pointer save/opcode#2 */ -/*34*/ u_long nc_scratcha; /* ??? Temporary register a */ - -/*38*/ u_char nc_dmode; -/*39*/ u_char nc_dien; -/*3a*/ u_char nc_dwt; - -/*3b*/ u_char nc_dcntl; /* --> Script execution control */ - #define SSM 0x10 /* mod: single step mode */ - #define STD 0x04 /* cmd: start dma mode */ - #define NOCOM 0x01 /* cmd: protect sfbr while reselect */ - -/*3c*/ u_long nc_adder; - -/*40*/ u_short nc_sien; /* -->: interrupt enable */ -/*42*/ u_short nc_sist; /* <--: interrupt status */ - #define STO 0x0400/* sta: timeout (select) */ - #define GEN 0x0200/* sta: timeout (general) */ - #define HTH 0x0100/* sta: timeout (handshake) */ - #define MA 0x80 /* sta: phase mismatch */ - #define CMP 0x40 /* sta: arbitration complete */ - #define SEL 0x20 /* sta: selected by another device */ - #define RSL 0x10 /* sta: reselected by another device*/ - #define SGE 0x08 /* sta: gross error (over/underflow)*/ - #define UDC 0x04 /* sta: unexpected disconnect */ - #define RST 0x02 /* sta: scsi bus reset detected */ - #define PAR 0x01 /* sta: scsi parity error */ - -/*44*/ u_char nc_slpar; -/*45*/ u_char nc_swide; -/*46*/ u_char nc_macntl; -/*47*/ u_char nc_gpcntl; -/*48*/ u_char nc_stime0; /* cmd: timeout for select&handshake*/ -/*49*/ u_char nc_stime1; /* cmd: timeout user defined */ -/*4a*/ u_short nc_respid; /* sta: Reselect-IDs */ - -/*4c*/ u_char nc_stest0; - -/*4d*/ u_char nc_stest1; - -/*4e*/ u_char nc_stest2; - #define ROF 0x40 /* reset scsi offset (after gross error!) */ - #define EXT 0x02 /* extended filtering */ - -/*4f*/ u_char nc_stest3; - #define TE 0x80 /* c: tolerAnt enable */ - #define CSF 0x02 /* c: clear scsi fifo */ - -/*50*/ u_short nc_sidl; /* Lowlevel: latched from scsi data */ -/*52*/ u_short nc_52_; -/*54*/ u_short nc_sodl; /* Lowlevel: data out to scsi data */ -/*56*/ u_short nc_56_; -/*58*/ u_short nc_sbdl; /* Lowlevel: data from scsi data */ -/*5a*/ u_short nc_5a_; -/*5c*/ u_char nc_scr0; /* Working register B */ -/*5d*/ u_char nc_scr1; /* */ -/*5e*/ u_char nc_scr2; /* */ -/*5f*/ u_char nc_scr3; /* */ -/*60*/ -}; - -/*----------------------------------------------------------- -** -** Utility macros for the script. -** -**----------------------------------------------------------- -*/ - -#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r)) -#define REG(r) REGJ (nc_, r) - -#ifndef TARGET_MODE -#define TARGET_MODE 0 -#endif - -typedef unsigned long ncrcmd; - -/*----------------------------------------------------------- -** -** SCSI phases -** -**----------------------------------------------------------- -*/ - -#define SCR_DATA_OUT 0x00000000 -#define SCR_DATA_IN 0x01000000 -#define SCR_COMMAND 0x02000000 -#define SCR_STATUS 0x03000000 -#define SCR_ILG_OUT 0x04000000 -#define SCR_ILG_IN 0x05000000 -#define SCR_MSG_OUT 0x06000000 -#define SCR_MSG_IN 0x07000000 - -/*----------------------------------------------------------- -** -** Data transfer via SCSI. -** -**----------------------------------------------------------- -** -** MOVE_ABS (LEN) -** <<start address>> -** -** MOVE_IND (LEN) -** <<dnad_offset>> -** -** MOVE_TBL -** <<dnad_offset>> -** -**----------------------------------------------------------- -*/ - -#define SCR_MOVE_ABS(l) ((0x08000000 ^ (TARGET_MODE << 1ul)) | (l)) -#define SCR_MOVE_IND(l) ((0x28000000 ^ (TARGET_MODE << 1ul)) | (l)) -#define SCR_MOVE_TBL (0x18000000 ^ (TARGET_MODE << 1ul)) - -struct scr_tblmove { - u_long size; - u_long addr; -}; - -/*----------------------------------------------------------- -** -** Selection -** -**----------------------------------------------------------- -** -** SEL_ABS | SCR_ID (0..7) [ | REL_JMP] -** <<alternate_address>> -** -** SEL_TBL | << dnad_offset>> [ | REL_JMP] -** <<alternate_address>> -** -**----------------------------------------------------------- -*/ - -#define SCR_SEL_ABS 0x40000000 -#define SCR_SEL_ABS_ATN 0x41000000 -#define SCR_SEL_TBL 0x42000000 -#define SCR_SEL_TBL_ATN 0x43000000 - -struct scr_tblsel { - u_char sel_0; - u_char sel_sxfer; - u_char sel_id; - u_char sel_scntl3; -}; - -#define SCR_JMP_REL 0x04000000 -#define SCR_ID(id) (((u_long)(id)) << 16) - -/*----------------------------------------------------------- -** -** Waiting for Disconnect or Reselect -** -**----------------------------------------------------------- -** -** WAIT_DISC -** dummy: <<alternate_address>> -** -** WAIT_RESEL -** <<alternate_address>> -** -**----------------------------------------------------------- -*/ - -#define SCR_WAIT_DISC 0x48000000 -#define SCR_WAIT_RESEL 0x50000000 - -/*----------------------------------------------------------- -** -** Bit Set / Reset -** -**----------------------------------------------------------- -** -** SET (flags {|.. }) -** -** CLR (flags {|.. }) -** -**----------------------------------------------------------- -*/ - -#define SCR_SET(f) (0x58000000 | (f)) -#define SCR_CLR(f) (0x60000000 | (f)) - -#define SCR_CARRY 0x00000400 -#define SCR_TRG 0x00000200 -#define SCR_ACK 0x00000040 -#define SCR_ATN 0x00000008 - - - - -/*----------------------------------------------------------- -** -** Memory to memory move -** -**----------------------------------------------------------- -** -** COPY (bytecount) -** << source_address >> -** << destination_address >> -** -**----------------------------------------------------------- -*/ - -#define SCR_COPY(n) (0xc0000000 | (n)) - -/*----------------------------------------------------------- -** -** Register move and binary operations -** -**----------------------------------------------------------- -** -** SFBR_REG (reg, op, data) reg = SFBR op data -** << 0 >> -** -** REG_SFBR (reg, op, data) SFBR = reg op data -** << 0 >> -** -** REG_REG (reg, op, data) reg = reg op data -** << 0 >> -** -**----------------------------------------------------------- -*/ - -#define SCR_REG_OFS(ofs) ((ofs) << 16ul) - -#define SCR_SFBR_REG(reg,op,data) \ - (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul)) - -#define SCR_REG_SFBR(reg,op,data) \ - (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul)) - -#define SCR_REG_REG(reg,op,data) \ - (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul)) - - -#define SCR_LOAD 0x00000000 -#define SCR_SHL 0x01000000 -#define SCR_OR 0x02000000 -#define SCR_XOR 0x03000000 -#define SCR_AND 0x04000000 -#define SCR_SHR 0x05000000 -#define SCR_ADD 0x06000000 -#define SCR_ADDC 0x07000000 - -/*----------------------------------------------------------- -** -** FROM_REG (reg) reg = SFBR -** << 0 >> -** -** TO_REG (reg) SFBR = reg -** << 0 >> -** -** LOAD_REG (reg, data) reg = <data> -** << 0 >> -** -** LOAD_SFBR(data) SFBR = <data> -** << 0 >> -** -**----------------------------------------------------------- -*/ - -#define SCR_FROM_REG(reg) \ - SCR_REG_SFBR(reg,SCR_OR,0) - -#define SCR_TO_REG(reg) \ - SCR_SFBR_REG(reg,SCR_OR,0) - -#define SCR_LOAD_REG(reg,data) \ - SCR_REG_REG(reg,SCR_LOAD,data) - -#define SCR_LOAD_SFBR(data) \ - (SCR_REG_SFBR (gpreg, SCR_LOAD, data)) - -/*----------------------------------------------------------- -** -** Waiting for Disconnect or Reselect -** -**----------------------------------------------------------- -** -** JUMP [ | IFTRUE/IFFALSE ( ... ) ] -** <<address>> -** -** JUMPR [ | IFTRUE/IFFALSE ( ... ) ] -** <<distance>> -** -** CALL [ | IFTRUE/IFFALSE ( ... ) ] -** <<address>> -** -** CALLR [ | IFTRUE/IFFALSE ( ... ) ] -** <<distance>> -** -** RETURN [ | IFTRUE/IFFALSE ( ... ) ] -** <<dummy>> -** -** INT [ | IFTRUE/IFFALSE ( ... ) ] -** <<ident>> -** -** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ] -** <<ident>> -** -** Conditions: -** WHEN (phase) -** IF (phase) -** CARRY -** DATA (data, mask) -** -**----------------------------------------------------------- -*/ - -#define SCR_JUMP 0x80080000 -#define SCR_JUMPR 0x80880000 -#define SCR_CALL 0x88080000 -#define SCR_CALLR 0x88880000 -#define SCR_RETURN 0x90080000 -#define SCR_INT 0x98080000 -#define SCR_INT_FLY 0x98180000 - -#define IFFALSE(arg) (0x00080000 | (arg)) -#define IFTRUE(arg) (0x00000000 | (arg)) - -#define WHEN(phase) (0x00030000 | (phase)) -#define IF(phase) (0x00020000 | (phase)) - -#define DATA(D) (0x00040000 | ((D) & 0xff)) -#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff)) - -#define CARRYSET (0x00200000) - -/*----------------------------------------------------------- -** -** SCSI constants. -** -**----------------------------------------------------------- -*/ - -/* -** Messages -*/ - -#define M_COMPLETE (0x00) -#define M_EXTENDED (0x01) -#define M_SAVE_DP (0x02) -#define M_RESTORE_DP (0x03) -#define M_DISCONNECT (0x04) -#define M_ID_ERROR (0x05) -#define M_ABORT (0x06) -#define M_REJECT (0x07) -#define M_NOOP (0x08) -#define M_PARITY (0x09) -#define M_LCOMPLETE (0x0a) -#define M_FCOMPLETE (0x0b) -#define M_RESET (0x0c) -#define M_ABORT_TAG (0x0d) -#define M_CLEAR_QUEUE (0x0e) -#define M_INIT_REC (0x0f) -#define M_REL_REC (0x10) -#define M_TERMINATE (0x11) -#define M_SIMPLE_TAG (0x20) -#define M_HEAD_TAG (0x21) -#define M_ORDERED_TAG (0x22) -#define M_IGN_RESIDUE (0x23) -#define M_IDENTIFY (0x80) - -#define M_X_MODIFY_DP (0x00) -#define M_X_SYNC_REQ (0x01) -#define M_X_WIDE_REQ (0x03) - -/* -** Status -*/ - -#define S_GOOD (0x00) -#define S_CHECK_COND (0x02) -#define S_COND_MET (0x04) -#define S_BUSY (0x08) -#define S_INT (0x10) -#define S_INT_COND_MET (0x14) -#define S_CONFLICT (0x18) -#define S_TERMINATED (0x20) -#define S_QUEUE_FULL (0x28) -#define S_ILLEGAL (0xff) -#define S_SENSE (0x80) - -#endif /*__NCR_REG_H__*/ |
