diff options
Diffstat (limited to 'sys/i386/isa/sound/CHANGELOG')
-rw-r--r-- | sys/i386/isa/sound/CHANGELOG | 200 |
1 files changed, 200 insertions, 0 deletions
diff --git a/sys/i386/isa/sound/CHANGELOG b/sys/i386/isa/sound/CHANGELOG new file mode 100644 index 0000000..04ff604 --- /dev/null +++ b/sys/i386/isa/sound/CHANGELOG @@ -0,0 +1,200 @@ +Changelog for version 3.5-alpha7 +-------------------------------- + +Since 3.5-alpha6 +- Changed all #ifndef EXCLUDE_xx stuff to #ifdef CONFIG_xx. Modified +configure to handle this. +- Removed initialization messages from the +modularized version. They can be enabled by using init_trace=1 in +the insmod command line (insmod sound init_trace=1). +- More AIX stuff. +- Added support for syncronizing dsp/audio devices with /dev/sequencer. +- mmap() support for dsp/audio devices. + +Since 3.5-alpha5 +- AIX port. +- Changed some xxx_PATCH macros in soundcard.h to work with + big endian machines. + +Since 3.5-alpha4 +- Removed the 'setfx' stuff from the version distributed with kernel + sources. + +Since 3.5-alpha3 +- Moved stuff from the 'setfx' program to the AudioTriX Pro driver. + +Since 3.5-alpha2 +- Modifications to makefile and configure.c. Unnecessary sources + are no longer compiled. Newly created local.h is also copied to + /etc/soundconf. "make oldconfig" reads /etc/soundconf and produces + new local.h which is compatible with current version of the driver. +- Some fixes to the SB16 support. +- Fixed random protection fault in gus_wave.c + +Since 3.5-alpha1 +- Modified to work with Linux-1.3.33 and leater +- Some minor changes + +Since 3.0.2 +- Support for CS4232 based PnP cards (AcerMagic S23 etc). +- Full duplex support for some CS4231, CS4232 and AD1845 based cards +(GUA MAX, AudioTrix Pro, AcerMagic S23 and many MAD16/Mozart cards +having a codec mentioned above). +- Almost fully rewritten loadable modules support. +- Fixed some bugs. +- Huge amount of testing (more testing is still required). +- mmap() support (works with some cards). Requires much more testing. +- Sample/patch/program loading for TB Maui/Tropez. No initialization +since TB doesn't allow me to release that code. +- Using CS4231 compatible codecs as timer for /dev/music. + +Since 3.0.1 +- Added allocation of I/O ports, DMA channels and interrupts +to the initialization code. This may break modules support since +the driver may not free some resources on unload. Should be fixed soon. + +Since 3.0 +- Some important bug fixes. +- select() for /dev/dsp and /dev/audio (Linux only). +(To use select() with read, you have to call read() to start +the recording. Calling write() kills recording immediately so +use select() carefully when you are writing a half duplex app. +Full duplex mode is not implemented yet.) Select works also with +/dev/sequencer and /dev/music. Maybe with /dev/midi## too. + +Since 3.0-beta2 +- Minor fixes. +- Added Readme.cards + +Since 3.0-beta1 +- Minor fixes to the modules support. +- Eliminated call to sb_free_irq() in ad1848.c +- Rewritten MAD16&Mozart support (not tested with MAD16 Pro). +- Fix to DMA initialization of PSS cards. +- Some fixes to ad1848/cs42xx mixer support (GUS MAX, MSS, etc.) +- Fixed some bugs in the PSS driver which caused I/O errors with + the MSS mode (/dev/dsp). + +Since 3.0-950506 +- Recording with GUS MAX fixed. It works when the driver is configured + to use two DMA channels with GUS MAX (16 bit ones recommended). + +Since 3.0-94xxxx +- Too many changes + +Since 3.0-940818 +- Fixes for Linux 1.1.4x. +- Disables Disney Sound System with SG NX Pro 16 (less noise). + +Since 2.90-2 +- Fixes to soundcard.h +- Non blocking mode to /dev/sequencer +- Experimental detection code for Ensoniq Soundscape. + +Since 2.90 +- Minor and major bug fixes + +Since pre-3.0-940712 +- GUS MAX support +- Partially working MSS/WSS support (could work with some cards). +- Hardware u-Law and A-Law support with AD1848/CS4248 and CS4231 codecs + (GUS MAX, GUS16, WSS etc). Hardware ADPCM is possible with GUS16 and + GUS MAX, but it doesn't work yet. +Since pre-3.0-940426 +- AD1848/CS4248/CS4231 codec support (MSS, GUS MAX, Aztec, Orchid etc). +This codec chip is used in various soundcards. This version is developed +for the 16 bit daughtercard of GUS. It should work with other cards also +if the following requirements are met: + - The I/O, IRQ and DMA settings are jumper selectable or + the card is initialized by booting DOS before booting Linux (etc.). + - You add the IO, IRQ and DMA settings manually to the local.h. + (Just define GUS16_BASE, GUS16_IRQ and GUS16_DMA). Note that + the base address bust be the base address of the codec chip not the + card itself. For the GUS16 these are the same but most MSS compatible + cards have the codec located at card_base+4. +- Some minor changes + +Since 2.5 (******* MAJOR REWRITE ***********) + +This version is based on v2.3. I have tried to maintain two versions +together so that this one should have the same features than v2.5. +Something may still be missing. If you notice such things, please let me +know. + +The Readme.v30 contains more details. + +- /dev/midi## devices. +- /dev/sequencer2 + +Since 2.5-beta2 +- Some fine tuning to the GUS v3.7 mixer code. +- Fixed speed limits for the plain SB (1.0 to 2.0). + +Since 2.5-beta +- Fixed OPL-3 detection with SB. Caused problems with PAS16. +- GUS v3.7 mixer support. + +Since 2.4 +- Mixer support for Sound Galaxy NX Pro (define __SGNXPRO__ on your local.h). +- Fixed truncated sound on /dev/dsp when the device is closed. +- Linear volume mode for GUS +- Pitch bends larger than +/- 2 octaves. +- MIDI recording for SB and SB Pro. (Untested). +- Some other fixes. +- SB16 MIDI and DSP drivers only initialized if SB16 actually installed. +- Implemented better detection for OPL-3. This should be useful if you + have an old SB Pro (the non-OPL-3 one) or a SB 2.0 clone which has a OPL-3. +- SVR4.2 support by Ian Hartas. Initial ALPHA TEST version (untested). + +Since 2.3b +- Fixed bug which made it impossible to make long recordings to disk. + Recording was not restarted after a buffer overflow situation. +- Limited mixer support for GUS. +- Numerous improvements to the GUS driver by Andrew Robinson. Including + some click removal etc. + +Since 2.3 +- Fixed some minor bugs in the SB16 driver. + +Since 2.2b +- Full SB16 DSP support. 8/16 bit, mono/stereo +- The SCO and FreeBSD versions should be in sync now. There are some + problems with SB16 and GUS in the freebsd versions. + The DMA buffer allocation of the SCO version has been polished but + there could still be some problems. At least it hogs memory. + The DMA channel + configuration method used in the sco/System is a hack. +- Support for the MPU emulation of the SB16. +- Some big arrays are now allocated boot time. This makes the bss segment + smaller which makes it possible to use the full driver with + NetBSD. These arrays are not allocated if no suitable soundcard is available. +- Fixed a bug in the compute_and_set_volume in gus_wave.c +- Fixed the too fast mono playback problem of SB Pro and PAS16. + +Since 2.2 +- Stereo recording for SB Pro. Somehow it was missing and nobody + had noticed it earlier. +- Minor polishing. +- Interpreting of boot time arguments (sound=) for Linux. +- Breakup of sb_dsp.c. Parts of the code has been moved to + sb_mixer.c and sb_midi.c + +Since 2.1 +- Preliminary support for SB16. + - The SB16 mixer is supported in its native mode. + - Digitized voice capability up to 44.1 kHz/8 bit/mono + (16 bit and stereo support coming in the next release). +- Fixed some bugs in the digitized voice driver for PAS16. +- Proper initialization of the SB emulation of latest PAS16 models. + +- Significantly improved /dev/dsp and /dev/audio support. + - Now supports half duplex mode. It's now possible to record and + playback without closing and reopening the device. + - It's possible to use smaller buffers than earlier. There is a new + ioctl(fd, SNDCTL_DSP_SUBDIVIDE, &n) where n should be 1, 2 or 4. + This call instructs the driver to use smaller buffers. The default + buffer size (0.5 to 1.0 seconds) is divided by n. Should be called + immediately after opening the device. + +Since 2.0 +Just cosmetic changes. |