diff options
Diffstat (limited to 'sys/i386/isa/if_fereg.h')
| -rw-r--r-- | sys/i386/isa/if_fereg.h | 118 |
1 files changed, 0 insertions, 118 deletions
diff --git a/sys/i386/isa/if_fereg.h b/sys/i386/isa/if_fereg.h deleted file mode 100644 index 7e28201..0000000 --- a/sys/i386/isa/if_fereg.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - * Hardware specification of various 8696x based Ethernet cards. - * Contributed by M. Sekiguchi <seki@sysrap.cs.fujitsu.co.jp> - * - * All Rights Reserved, Copyright (C) Fujitsu Limited 1995 - * - * This software may be used, modified, copied, distributed, and sold, - * in both source and binary form provided that the above copyright, - * these terms and the following disclaimer are retained. The name of - * the author and/or the contributor may not be used to endorse or - * promote products derived from this software without specific prior - * written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -/* $FreeBSD$ */ - -/* - * Registers on FMV-180 series' ISA bus interface ASIC. - * I'm not sure the following register names are appropriate. - * Doesn't it look silly, eh? FIXME. - */ - -#define FE_FMV0 16 /* Card status register #0 */ -#define FE_FMV1 17 /* Card status register #1 */ -#define FE_FMV2 18 /* Card config register #0 */ -#define FE_FMV3 19 /* Card config register #1 */ -#define FE_FMV4 20 /* Station address #1 */ -#define FE_FMV5 21 /* Station address #2 */ -#define FE_FMV6 22 /* Station address #3 */ -#define FE_FMV7 23 /* Station address #4 */ -#define FE_FMV8 24 /* Station address #5 */ -#define FE_FMV9 25 /* Station address #6 */ -#define FE_FMV10 26 /* Buffer RAM control register */ -#define FE_FMV11 27 /* Buffer RAM data register */ - -/* - * FMV-180 series' ASIC register values. - */ - -/* FMV0: Card status register #0: Misc info? */ -#define FE_FMV0_MEDIA 0x07 /* Supported physical media. */ -#define FE_FMV0_PRRDY 0x10 /* ??? */ -#define FE_FMV0_PRERR 0x20 /* ??? */ -#define FE_FMV0_ERRDY 0x40 /* ??? */ -#define FE_FMV0_IREQ 0x80 /* ??? */ - -#define FE_FMV0_MEDIUM_5 0x01 /* 10base5/Dsub */ -#define FE_FMV0_MEDIUM_2 0x02 /* 10base2/BNC */ -#define FE_FMV0_MEDIUM_T 0x04 /* 10baseT/RJ45 */ - -/* Card status register #1: Hardware revision. */ -#define FE_FMV1_REV 0x0F /* Card revision */ -#define FE_FMV1_UPPER 0xF0 /* Usage unknown */ - -/* Card config register #0: I/O port address assignment. */ -#define FE_FMV2_IOS 0x07 /* I/O selection. */ -#define FE_FMV2_MES 0x38 /* ??? boot ROM? */ -#define FE_FMV2_IRS 0xC0 /* IRQ selection. */ - -#define FE_FMV2_IOS_SHIFT 0 -#define FE_FMV2_MES_SHIFT 3 -#define FE_FMV2_IRS_SHIFT 6 - -/* Card config register #1: IRQ enable */ -#define FE_FMV3_IRQENB 0x80 /* IRQ enable. */ - -/* - * Register(?) specific to AT1700/RE2000. - */ - -#define FE_ATI_RESET 0x1F /* Write to reset the 86965. */ - -/* EEPROM allocation (offsets) of AT1700/RE2000. */ -#define FE_ATI_EEP_ADDR 0x08 /* Station address. (8-13) */ -#define FE_ATI_EEP_MEDIA 0x18 /* Media type. */ -#define FE_ATI_EEP_MAGIC 0x19 /* XXX Magic. */ -#define FE_ATI_EEP_MODEL 0x1e /* Hardware type. */ -#define FE_ATI_EEP_REVISION 0x1f /* Hardware revision. */ - -/* Value for FE_ATI_EEP_MODEL. */ -#define FE_ATI_MODEL_AT1700T 0x00 -#define FE_ATI_MODEL_AT1700BT 0x01 -#define FE_ATI_MODEL_AT1700FT 0x02 -#define FE_ATI_MODEL_AT1700AT 0x03 - -/* - * Registers on MBH10302. - */ - -#define FE_MBH0 0x10 /* ??? Including interrupt. */ -#define FE_MBH1 0x11 /* ??? */ -#define FE_MBH10 0x1A /* Station address. (10 - 15) */ - -/* Values to be set in MBH0 register. */ -#define FE_MBH0_MAGIC 0x0D /* Just a magic constant? */ -#define FE_MBH0_INTR 0x10 /* Master interrupt control. */ - -#define FE_MBH0_INTR_ENABLE 0x10 /* Enable interrupts. */ -#define FE_MBH0_INTR_DISABLE 0x00 /* Disable interrupts. */ - -/* - * Registers on RE1000. (*NOT* on RE1000 Plus.) - */ - -/* IRQ configuration. */ -#define FE_RE1000_IRQCONF 0x10 |
