diff options
Diffstat (limited to 'sys/i386/isa/if_cx.c')
-rw-r--r-- | sys/i386/isa/if_cx.c | 818 |
1 files changed, 818 insertions, 0 deletions
diff --git a/sys/i386/isa/if_cx.c b/sys/i386/isa/if_cx.c new file mode 100644 index 0000000..d6c0367 --- /dev/null +++ b/sys/i386/isa/if_cx.c @@ -0,0 +1,818 @@ +/* + * Cronyx-Sigma adapter driver for FreeBSD. + * Supports PPP/HDLC and Cisco/HDLC protocol in synchronous mode, + * and asyncronous channels with full modem control. + * Keepalive protocol implemented in both Cisco and PPP modes. + * + * Copyright (C) 1994 Cronyx Ltd. + * Author: Serge Vakulenko, <vak@zebub.msk.su> + * + * This software is distributed with NO WARRANTIES, not even the implied + * warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Authors grant any other persons or organisations permission to use + * or modify this software as long as this message is kept with the software, + * all derivative works or modified versions. + * + * Version 1.2, Tue Nov 22 18:57:27 MSK 1994 + */ +#undef DEBUG + +#include "cx.h" +#if NCX > 0 +#include <bpfilter.h> + +#include <sys/param.h> +#include <systm.h> +#include <kernel.h> +#include <sys/mbuf.h> +#include <sys/ioctl.h> +#include <sys/socket.h> +#include <sys/conf.h> +#include <sys/errno.h> + +#include <net/if.h> +#include <net/if_types.h> + +#if NBPFILTER > 0 +#include <net/bpf.h> +#include <net/bpfdesc.h> +#endif + +#ifdef __FreeBSD__ +# include <i386/isa/isa_device.h> +# if __FreeBSD__ < 2 +# include <i386/include/pio.h> +# else +# include <i386/include/cpufunc.h> +# include <sys/devconf.h> +# endif +# define init_func_t void(*)(int) +# define watchdog_func_t void(*)(int) +# define start_func_t void(*)(struct ifnet*) +#endif + +#ifdef __bsdi__ +# if INET +# include <netinet/in.h> +# include <netinet/in_systm.h> +# include <netinet/ip.h> +# endif +# include <sys/device.h> +# include <i386/isa/isavar.h> +# include <i386/isa/icu.h> +# include <i386/include/inline.h> +# include <net/if_slvar.h> +# include <net/if_p2p.h> +# define timeout_func_t void(*)() +# define init_func_t int(*)() +# define watchdog_func_t int(*)() +# define start_func_t int(*)() +struct cxsoftc { + struct device dev; /* base device */ + struct isadev isadev; /* ISA device */ + struct intrhand intr; /* interrupt vectoring */ +}; +#endif + +#include <net/if_sppp.h> +#include <sys/cronyx.h> +#include <i386/isa/cxreg.h> + +#ifdef DEBUG +# define print(s) printf s +#else +# define print(s) /*void*/ +#endif + +#define TXTIMEOUT 2 /* transmit timeout in seconds */ +#define DMABUFSZ (6*256) /* buffer size */ +#define PPP_HEADER_LEN 4 /* size of PPP header */ + +/* + * Under BSDI it's possible to use general p2p protocol scheme, + * as well as our own one. Switching is done via IFF_ALTPHYS flag. + * Our ifnet pointer holds the buffer large enough to contain + * any of sppp and p2p structures. + */ +#ifdef __bsdi__ +# define SPPPSZ (sizeof (struct sppp)) +# define P2PSZ (sizeof (struct p2pcom)) +# define IFSTRUCTSZ (SPPPSZ>P2PSZ ? SPPPSZ : P2PSZ) +#else +# define IFSTRUCTSZ (sizeof (struct sppp)) +#endif +#define IFNETSZ (sizeof (struct ifnet)) + +int cxoutput (struct ifnet *ifp, struct mbuf *m, struct sockaddr *dst, struct rtentry *rt); +int cxsioctl (struct ifnet *ifp, int cmd, caddr_t data); +void cxinit (int unit); +void cxstart (struct ifnet *ifp); +void cxwatchdog (int unit); +void cxinput (cx_chan_t *c, void *buf, unsigned len); +int cxrinta (cx_chan_t *c); +void cxtinta (cx_chan_t *c); +void cxmint (cx_chan_t *c); +void cxtimeout (caddr_t a); + +cx_board_t cxboard [NCX]; /* adapter state structures */ +cx_chan_t *cxchan [NCX*NCHAN]; /* unit to channel struct pointer */ + +static unsigned short irq_valid_values [] = { 3, 5, 7, 10, 11, 12, 15, 0 }; +static unsigned short drq_valid_values [] = { 5, 6, 7, 0 }; +static unsigned short port_valid_values [] = { + 0x240, 0x260, 0x280, 0x300, 0x320, 0x380, 0x3a0, 0, +}; + +#if __FreeBSD__ >= 2 +static char cxdescription [80]; +struct kern_devconf kdc_cx [NCX] = { { + 0, 0, 0, "cx", 0, { MDDT_ISA, 0, "net" }, + isa_generic_externalize, 0, 0, ISA_EXTERNALLEN, &kdc_isa0, 0, + DC_IDLE, cxdescription, +} }; +#endif + +/* + * Check that the value is contained in the list of correct values. + */ +static int valid (unsigned short value, unsigned short *list) +{ + while (*list) + if (value == *list++) + return (1); + return (0); +} + +/* + * Print the mbuf chain, for debug purposes only. + */ +static void printmbuf (struct mbuf *m) +{ + printf ("mbuf:"); + for (; m; m=m->m_next) { + if (m->m_flags & M_PKTHDR) + printf (" HDR %d:", m->m_pkthdr.len); + if (m->m_flags & M_EXT) + printf (" EXT:"); + printf (" %d", m->m_len); + } + printf ("\n"); +} + +/* + * Make an mbuf from data. + */ +static struct mbuf *makembuf (void *buf, unsigned len) +{ + struct mbuf *m, *o, *p; + + MGETHDR (m, M_DONTWAIT, MT_DATA); + if (! m) + return (0); + if (len >= MINCLSIZE) + MCLGET (m, M_DONTWAIT); + m->m_pkthdr.len = len; + m->m_len = 0; + + p = m; + while (len) { + unsigned n = M_TRAILINGSPACE (p); + if (n > len) + n = len; + + if (! n) { + /* Allocate new mbuf. */ + o = p; + MGET (p, M_DONTWAIT, MT_DATA); + if (! p) { + m_freem (m); + return (0); + } + if (len >= MINCLSIZE) + MCLGET (p, M_DONTWAIT); + p->m_len = 0; + o->m_next = p; + + n = M_TRAILINGSPACE (p); + if (n > len) + n = len; + } + + bcopy (buf, mtod (p, caddr_t) + p->m_len, n); + + p->m_len += n; + buf += n; + len -= n; + } + return (m); +} + +/* + * Test the presence of the adapter on the given i/o port. + */ +#ifdef __FreeBSD__ +int cxprobe (struct isa_device *id) +{ + int unit = id->id_unit; + int iobase = id->id_iobase; + int irq = id->id_irq; + int drq = id->id_drq; + int irqnum; +#endif +#ifdef __bsdi__ +int cxprobe (struct device *parent, struct cfdata *cf, void *aux) +{ + int unit = cf->cf_unit; + int iobase = ((struct isa_attach_args*)aux)->ia_iobase; + int irq = ((struct isa_attach_args*)aux)->ia_irq; + int drq = ((struct isa_attach_args*)aux)->ia_drq; + int irqnum, i; + + for (i=0; i<NCX; ++i) + if (i != unit && cxboard[i].port == iobase) + return (0); + if (irq == IRQUNK) { + irq = isa_irqalloc (IRQ3|IRQ5|IRQ7|IRQ10|IRQ11|IRQ12|IRQ15); + if (! irq) + return (0); + ((struct isa_attach_args*)aux)->ia_irq = irq; + } +#endif + irqnum = ffs (irq) - 1; + + print (("cx%d: probe iobase=0x%x irq=%d drq=%d\n", + unit, iobase, irqnum, drq)); + if (! valid (irqnum, irq_valid_values)) { + printf ("cx%d: Incorrect IRQ: %d\n", unit, irqnum); + return (0); + } + if (! valid (iobase, port_valid_values)) { + printf ("cx%d: Incorrect port address: 0x%x\n", unit, iobase); + return (0); + } + if (! valid (drq, drq_valid_values)) { + printf ("cx%d: Incorrect DMA channel: %d\n", unit, drq); + return (0); + } + if (! cx_probe_board (iobase)) + return (0); + return (1); +} + +/* + * The adapter is present, initialize the driver structures. + */ +#ifdef __FreeBSD__ +int cxattach (struct isa_device *id) +{ + int unit = id->id_unit; + int iobase = id->id_iobase; + int irq = id->id_irq; + int drq = id->id_drq; +#endif +#ifdef __bsdi__ +void cxattach (struct device *parent, struct device *self, void *aux) +{ + int unit = self->dv_unit; + int iobase = ((struct isa_attach_args*)aux)->ia_iobase; + int irq = ((struct isa_attach_args*)aux)->ia_irq; + int drq = ((struct isa_attach_args*)aux)->ia_drq; + struct cxsoftc *sc = (struct cxsoftc*) self; + void cxintr (cx_board_t *b); +#endif + cx_board_t *b = cxboard + unit; + int i; + + /* Initialize the board structure. */ + cx_init (b, unit, iobase, ffs(irq)-1, drq); + + for (i=0; i<NCHAN; ++i) { + cx_chan_t *c = b->chan + i; + int u = b->num*NCHAN + i; + cxchan[u] = c; + + if (c->type == T_NONE) + continue; + + /* Allocate the buffer memory. */ + c->arbuf = malloc (DMABUFSZ, M_DEVBUF, M_NOWAIT); + c->brbuf = malloc (DMABUFSZ, M_DEVBUF, M_NOWAIT); + c->atbuf = malloc (DMABUFSZ, M_DEVBUF, M_NOWAIT); + c->btbuf = malloc (DMABUFSZ, M_DEVBUF, M_NOWAIT); + + /* All buffers should be located in lower 16M of memory! */ + if (!c->arbuf || !c->brbuf || !c->atbuf || !c->btbuf) { + printf ("cx%d.%d: No memory for channel buffers\n", + c->board->num, c->num); + c->type = T_NONE; + } + + switch (c->type) { + case T_SYNC_RS232: + case T_SYNC_V35: + case T_SYNC_RS449: + case T_UNIV_RS232: + case T_UNIV_RS449: + case T_UNIV_V35: + c->ifp = malloc (IFSTRUCTSZ, M_DEVBUF, M_NOWAIT); + if (! c->ifp) { + printf ("cx%d.%d: No memory for ifnet buffer\n", + c->board->num, c->num); + c->type = T_NONE; + continue; + } + c->ifp->if_unit = u; + c->ifp->if_name = "cx"; + c->ifp->if_mtu = PP_MTU; + c->ifp->if_flags = IFF_POINTOPOINT|IFF_MULTICAST; + c->ifp->if_ioctl = cxsioctl; + c->ifp->if_start = (start_func_t) cxstart; + c->ifp->if_watchdog = (watchdog_func_t) cxwatchdog; + /* Init routine is never called by upper level? */ + c->ifp->if_init = (init_func_t) cxinit; + sppp_attach (c->ifp); + if_attach (c->ifp); +#if NBPFILTER > 0 + /* If BPF is in the kernel, call the attach for it. */ + bpfattach (&c->bpf, c->ifp, DLT_PPP, PPP_HEADER_LEN); +#endif + } + } + + /* Reset the adapter. */ + cx_setup_board (b); + + /* Activate the timeout routine. */ + if (unit == 0) + timeout ((timeout_func_t) cxtimeout, 0, hz*5); + +#if __FreeBSD__ >= 2 + if (unit != 0) + kdc_cx[unit] = kdc_cx[0]; + kdc_cx[unit].kdc_unit = unit; + kdc_cx[unit].kdc_isa = id; + sprintf (cxdescription, "Cronyx-Sigma-%s sync/async serial adapter", + b->name); + dev_attach (&kdc_cx[unit]); +#endif +#ifdef __FreeBSD__ + printf ("cx%d: <Cronyx-%s>\n", unit, b->name); + return (1); +#endif +#ifdef __bsdi__ + printf (": <Cronyx-%s>\n", b->name); + isa_establish (&sc->isadev, &sc->dev); + sc->intr.ih_fun = (int(*)()) cxintr; + sc->intr.ih_arg = (void*) b; + intr_establish (irq, &sc->intr, DV_NET); +#endif +} + +#ifdef __FreeBSD__ +struct isa_driver cxdriver = { cxprobe, cxattach, "cx" }; +#endif +#ifdef __bsdi__ +struct cfdriver cxcd = { 0, "cx", cxprobe, cxattach, sizeof (struct cxsoftc) }; +#endif + +/* + * Process an ioctl request. + */ +int cxsioctl (struct ifnet *ifp, int cmd, caddr_t data) +{ + cx_chan_t *c = cxchan[ifp->if_unit]; + int error, s; + + if (c->type==T_NONE || c->mode==M_ASYNC) + return (EINVAL); +#ifdef __bsdi__ + if (c->sopt.ext) { + /* Save RUNNING flag. */ + int running = (ifp->if_flags & IFF_RUNNING); + error = p2p_ioctl (ifp, cmd, data); + ifp->if_flags &= ~IFF_RUNNING; + ifp->if_flags |= running; + } else +#endif + error = sppp_ioctl (ifp, cmd, data); + if (error) + return (error); + if (cmd != SIOCSIFFLAGS) + return (0); + + s = splimp (); + if (! (ifp->if_flags & IFF_UP) && (ifp->if_flags & IFF_RUNNING)) + /* Interface is down and running -- stop it. */ + cxinit (ifp->if_unit); + else if ((ifp->if_flags & IFF_UP) && ! (ifp->if_flags & IFF_RUNNING)) + /* Interface is up and not running -- start it. */ + cxinit (ifp->if_unit); + splx (s); + return (0); +} + +/* + * Initialization of interface. + */ +void cxinit (int unit) +{ + cx_chan_t *c = cxchan[unit]; + unsigned short port = c->chip->port; + int s; + + print (("cx%d.%d: cxinit\n", c->board->num, c->num)); + + /* Disable interrupts */ + s = splimp(); + + /* Reset the channel (for sync modes only) */ + if (c->ifp->if_flags & IFF_OACTIVE) { + outb (CAR(port), c->num & 3); + outb (STCR(port), STC_ABORTTX | STC_SNDSPC); + } + cx_setup_chan (c); + c->ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); + + if (c->ifp->if_flags & IFF_UP) { + /* The interface is up, start it */ + c->ifp->if_flags |= IFF_RUNNING; + +#if __FreeBSD__ >= 2 + /* Mark the board busy on the first startup. + * Never goes idle. */ + kdc_cx[c->board->num].kdc_state = DC_BUSY; +#endif + /* Initialize channel, enable receiver and transmitter */ + cx_cmd (port, CCR_INITCH | CCR_ENRX | CCR_ENTX); + /* Repeat the command, to avoid the rev.H bug */ + cx_cmd (port, CCR_INITCH | CCR_ENRX | CCR_ENTX); + + /* Start receiver */ + outw (ARBCNT(port), DMABUFSZ); + outb (ARBSTS(port), BSTS_OWN24); + outw (BRBCNT(port), DMABUFSZ); + outb (BRBSTS(port), BSTS_OWN24); + + /* Raise DTR and RTS */ + cx_chan_dtr (c, 1); + cx_chan_rts (c, 1); + + /* Enable interrupts */ + outb (IER(port), IER_RXD | IER_TXD); + + cxstart (c->ifp); + + } else if (! c->sopt.ext) + /* Flush the interface output queue, if it is down */ + sppp_flush (c->ifp); + + splx (s); +} + +/* + * Fill transmitter buffer with data. + */ +void cxput (cx_chan_t *c, char b) +{ + struct mbuf *m; + unsigned char *buf; + unsigned short port = c->chip->port, len, cnt_port, sts_port; + + /* Choose the buffer. */ + if (b == 'A') { + buf = c->atbuf; + cnt_port = ATBCNT(port); + sts_port = ATBSTS(port); + } else { + buf = c->btbuf; + cnt_port = BTBCNT(port); + sts_port = BTBSTS(port); + } + + /* Is it busy? */ + if (inb (sts_port) & BSTS_OWN24) { + c->ifp->if_flags |= IFF_OACTIVE; + return; + } + + /* Get the packet to send. */ +#ifdef __bsdi__ + if (c->sopt.ext) { + struct p2pcom *p = (struct p2pcom*) c->ifp; + int s = splimp (); + + IF_DEQUEUE (&p->p2p_isnd, m) + if (! m) + IF_DEQUEUE (&c->ifp->if_snd, m) + splx (s); + } else +#endif + m = sppp_dequeue (c->ifp); + if (! m) + return; + len = m->m_pkthdr.len; + if (len >= DMABUFSZ) { + printf ("cx%d.%d: too long packet: %d bytes\n", + c->board->num, c->num, len); + printmbuf (m); + m_freem (m); + return; + } + m_copydata (m, 0, len, buf); +#if NBPFILTER > 0 + if (c->bpf) + bpf_mtap (c->bpf, m); +#endif + m_freem (m); + + /* Start transmitter. */ + outw (cnt_port, len); + outb (sts_port, BSTS_EOFR | BSTS_INTR | BSTS_OWN24); +#ifdef DEBUG + if (c->ifp->if_flags & IFF_DEBUG) + printf ("cx%d.%d: enqueue %d bytes to %c\n", + c->board->num, c->num, len, buf==c->atbuf ? 'A' : 'B'); +#endif + c->ifp->if_flags |= IFF_OACTIVE; +} + +/* + * Start output on interface. Get another datagram to send + * off of the interface queue, and copy it to the interface + * before starting the output. + */ +void cxstart (struct ifnet *ifp) +{ + cx_chan_t *c = cxchan[ifp->if_unit]; + unsigned short port = c->chip->port; + + /* No output if the interface is down. */ + if (! (ifp->if_flags & IFF_RUNNING)) + return; + + /* Set the current channel number. */ + outb (CAR(port), c->num & 3); + + /* Determine the buffer order. */ + if (inb (DMABSTS(port)) & DMABSTS_NTBUF) { + cxput (c, 'B'); + cxput (c, 'A'); + } else { + cxput (c, 'A'); + cxput (c, 'B'); + } + + /* Set up transmit timeout. */ + if (c->ifp->if_flags & IFF_OACTIVE) + c->ifp->if_timer = TXTIMEOUT; + + /* + * Enable TXMPTY interrupt, + * to catch the case when the second buffer is empty. + */ + if ((inb (ATBSTS(port)) & BSTS_OWN24) && + (inb (BTBSTS(port)) & BSTS_OWN24)) { + outb (IER(port), IER_RXD | IER_TXD | IER_TXMPTY); + } else + outb (IER(port), IER_RXD | IER_TXD); +} + +/* + * Handle transmit timeouts. + * Recover after lost transmit interrupts. + */ +void cxwatchdog (int unit) +{ + cx_chan_t *c = cxchan[unit]; + + if (c->ifp->if_flags & IFF_OACTIVE) { + c->ifp->if_flags &= ~IFF_OACTIVE; + cxstart (c->ifp); + } +} + +/* + * Handle receive interrupts, including receive errors and + * receive timeout interrupt. + */ +void cxrinth (cx_chan_t *c) +{ + unsigned short port = c->chip->port; + unsigned short len, risr = inw (RISR(port)); + + print (("cx%d.%d: hdlc receive interrupt, risr=%b, arbsts=%b, brbsts=%b\n", + c->board->num, c->num, risr, RISH_BITS, + inb (ARBSTS(port)), BSTS_BITS, inb (BRBSTS(port)), BSTS_BITS)); + + /* Receive errors. */ + if (risr & (RIS_BUSERR | RIS_OVERRUN | RISH_CRCERR | RISH_RXABORT)) { + if (c->ifp->if_flags & IFF_DEBUG) + printf ("cx%d.%d: receive error, risr=%b\n", + c->board->num, c->num, risr, RISH_BITS); + ++c->ifp->if_ierrors; + if (risr & RIS_OVERRUN) + ++c->ifp->if_collisions; + } else if (risr & RIS_EOBUF) { + /* Handle received data. */ + len = (risr & RIS_BB) ? inw(BRBCNT(port)) : inw(ARBCNT(port)); + if (len > DMABUFSZ) { + /* Fatal error: actual DMA transfer size + * exceeds our buffer size. It could be caused + * by incorrectly programmed DMA register or + * hardware fault. Possibly, should panic here. */ + printf ("cx%d.%d: panic! DMA buffer overflow: %d bytes\n", + c->board->num, c->num, len); + ++c->ifp->if_ierrors; + } else if (! (risr & RIS_EOFR)) { + /* The received frame does not fit in the DMA buffer. + * It could be caused by serial lie noise, + * or if the peer has too big MTU. */ + if (c->ifp->if_flags & IFF_DEBUG) + printf ("cx%d.%d: received frame length exceeds MTU, risr=%b\n", + c->board->num, c->num, risr, RISH_BITS); + ++c->ifp->if_ierrors; + } else { + /* Valid frame received. */ + print (("cx%d.%d: HDLC: %d bytes received\n", + c->board->num, c->num, len)); + cxinput (c, (risr & RIS_BB) ? c->brbuf : c->arbuf, len); + ++c->ifp->if_ipackets; + } + } + + /* Restart receiver. */ + if (! (inb (ARBSTS(port)) & BSTS_OWN24)) { + outw (ARBCNT(port), DMABUFSZ); + outb (ARBSTS(port), BSTS_OWN24); + } + if (! (inb (BRBSTS(port)) & BSTS_OWN24)) { + outw (BRBCNT(port), DMABUFSZ); + outb (BRBSTS(port), BSTS_OWN24); + } +} + +/* + * Handle transmit interrupt. + */ +int cxtinth (cx_chan_t *c) +{ + unsigned short port = c->chip->port; + unsigned char tisr = inb (TISR(port)); + unsigned char teoir = 0; + + print (("cx%d.%d: hdlc transmit interrupt, tisr=%b, atbsts=%b, btbsts=%b\n", + c->board->num, c->num, tisr, TIS_BITS, + inb (ATBSTS(port)), BSTS_BITS, inb (BTBSTS(port)), BSTS_BITS)); + + if (tisr & (TIS_BUSERR | TIS_UNDERRUN)) { + if (c->ifp->if_flags & IFF_DEBUG) + printf ("cx%d.%d: transmit error, tisr=%b\n", + c->board->num, c->num, tisr, TIS_BITS); + ++c->ifp->if_oerrors; + /* Terminate the failed buffer. */ + teoir |= TEOI_TERMBUFF; + } else if (tisr & (TIS_EOFR)) + ++c->ifp->if_opackets; + + c->ifp->if_flags &= ~IFF_OACTIVE; + cxstart (c->ifp); + return (teoir); +} + +#ifdef __FreeBSD__ +void cxintr (int bnum) +{ + cx_board_t *b = cxboard + bnum; +#endif +#ifdef __bsdi__ +void cxintr (cx_board_t *b) +{ +#endif + while (! (inw (BSR(b->port)) & BSR_NOINTR)) { + /* Acknowledge the interrupt to enter the interrupt context. */ + /* Read the local interrupt vector register. */ + unsigned char livr = inb (IACK(b->port, BRD_INTR_LEVEL)); + cx_chan_t *c = b->chan + (livr>>2 & 0xf); + unsigned short port = c->chip->port; + unsigned short eoiport = REOIR(port); + unsigned char eoi = 0; + + if (c->type == T_NONE) { + printf ("cx%d.%d: unexpected interrupt, livr=0x%x\n", + c->board->num, c->num, livr); + continue; /* incorrect channel number? */ + } + /* print (("cx%d.%d: interrupt, livr=0x%x\n", + c->board->num, c->num, livr)); */ + + /* Clear RTS to stop receiver data flow while we are busy + * processing the interrupt, thus avoiding underruns. */ + if (! c->sopt.norts) { + outb (MSVR_RTS(port), 0); + c->rts = 0; + } + + switch (livr & 3) { + case LIV_EXCEP: /* receive exception */ + case LIV_RXDATA: /* receive interrupt */ + switch (c->mode) { + case M_ASYNC: eoi = cxrinta (c); break; + case M_HDLC: cxrinth (c); break; + default:; /* No bisync and X.21 yet */ + } + break; + case LIV_TXDATA: /* transmit interrupt */ + eoiport = TEOIR(port); + switch (c->mode) { + case M_ASYNC: cxtinta (c); break; + case M_HDLC: eoi = cxtinth (c); break; + default:; /* No bisync and X.21 yet */ + } + break; + case LIV_MODEM: /* modem/timer interrupt */ + eoiport = MEOIR(port); + cxmint (c); + break; + } + + /* Raise RTS for this channel if and only if + * both receive buffers are empty. */ + if (! c->sopt.norts && (inb (CSR(port)) & CSRA_RXEN) && + (inb (ARBSTS(port)) & BSTS_OWN24) && + (inb (BRBSTS(port)) & BSTS_OWN24)) { + outb (MSVR_RTS(port), MSV_RTS); + c->rts = 1; + } + + /* Exit from interrupt context. */ + outb (eoiport, eoi); + } +} + +/* + * Process the received packet. + */ +void cxinput (cx_chan_t *c, void *buf, unsigned len) +{ + /* Make an mbuf. */ + struct mbuf *m = makembuf (buf, len); + if (! m) { + if (c->ifp->if_flags & IFF_DEBUG) + printf ("cx%d.%d: no memory for packet\n", + c->board->num, c->num); + ++c->ifp->if_iqdrops; + return; + } + m->m_pkthdr.rcvif = c->ifp; +#ifdef DEBUG + printmbuf (m); +#endif + +#if NBPFILTER > 0 + /* + * Check if there's a BPF listener on this interface. + * If so, hand off the raw packet to bpf. + */ + if (c->bpf) + bpf_tap (c->bpf, buf, len); +#endif +#ifdef __bsdi__ + if (c->sopt.ext) { + struct p2pcom *p = (struct p2pcom*) c->ifp; + (*p->p2p_input) (p, m); + } else +#endif + sppp_input (c->ifp, m); +} + +void cxswitch (cx_chan_t *c, cx_soft_opt_t new) +{ +#ifdef __bsdi__ + if (new.ext && ! c->sopt.ext) { + /* Switch to external ppp implementation (BSDI) */ + sppp_detach (c->ifp); + bzero ((void*) c->ifp + IFNETSZ, IFSTRUCTSZ-IFNETSZ); + } else if (! new.ext && c->sopt.ext) { + /* Switch to built-in ppp implementation */ + bzero ((void*) c->ifp + IFNETSZ, IFSTRUCTSZ-IFNETSZ); + sppp_attach (c->ifp); + } +#else + new.ext = 0; +#endif + if (! new.ext) { + struct sppp *sp = (struct sppp*) c->ifp; + + if (new.cisco) + sp->pp_flags |= PP_CISCO; + else + sp->pp_flags &= ~PP_CISCO; + if (new.keepalive) + sp->pp_flags |= PP_KEEPALIVE; + else + sp->pp_flags &= ~PP_KEEPALIVE; + } + c->sopt = new; +} +#endif /* NCX */ |