diff options
Diffstat (limited to 'sys/i386/include/ioctl_bt848.h')
-rw-r--r-- | sys/i386/include/ioctl_bt848.h | 320 |
1 files changed, 30 insertions, 290 deletions
diff --git a/sys/i386/include/ioctl_bt848.h b/sys/i386/include/ioctl_bt848.h index b6646c6..7ef237b 100644 --- a/sys/i386/include/ioctl_bt848.h +++ b/sys/i386/include/ioctl_bt848.h @@ -1,298 +1,38 @@ -/* - * extensions to ioctl_meteor.h for the bt848 cards +/*- + * Copyright (c) 2003 David O'Brien + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ -#ifndef _MACHINE_IOCTL_BT848_H_ -#define _MACHINE_IOCTL_BT848_H_ - -/* - * frequency sets - */ -#define CHNLSET_NABCST 1 -#define CHNLSET_CABLEIRC 2 -#define CHNLSET_CABLEHRC 3 -#define CHNLSET_WEUROPE 4 -#define CHNLSET_JPNBCST 5 -#define CHNLSET_JPNCABLE 6 -#define CHNLSET_XUSSR 7 -#define CHNLSET_AUSTRALIA 8 -#define CHNLSET_FRANCE 9 -#define CHNLSET_MIN CHNLSET_NABCST -#define CHNLSET_MAX CHNLSET_FRANCE - - -/* - * constants for various tuner registers - */ -#define BT848_HUEMIN (-90) -#define BT848_HUEMAX 90 -#define BT848_HUECENTER 0 -#define BT848_HUERANGE 179.3 -#define BT848_HUEREGMIN (-128) -#define BT848_HUEREGMAX 127 -#define BT848_HUESTEPS 256 - -#define BT848_BRIGHTMIN (-50) -#define BT848_BRIGHTMAX 50 -#define BT848_BRIGHTCENTER 0 -#define BT848_BRIGHTRANGE 99.6 -#define BT848_BRIGHTREGMIN (-128) -#define BT848_BRIGHTREGMAX 127 -#define BT848_BRIGHTSTEPS 256 - -#define BT848_CONTRASTMIN 0 -#define BT848_CONTRASTMAX 237 -#define BT848_CONTRASTCENTER 100 -#define BT848_CONTRASTRANGE 236.57 -#define BT848_CONTRASTREGMIN 0 -#define BT848_CONTRASTREGMAX 511 -#define BT848_CONTRASTSTEPS 512 - -#define BT848_CHROMAMIN 0 -#define BT848_CHROMAMAX 284 -#define BT848_CHROMACENTER 100 -#define BT848_CHROMARANGE 283.89 -#define BT848_CHROMAREGMIN 0 -#define BT848_CHROMAREGMAX 511 -#define BT848_CHROMASTEPS 512 - -#define BT848_SATUMIN 0 -#define BT848_SATUMAX 202 -#define BT848_SATUCENTER 100 -#define BT848_SATURANGE 201.18 -#define BT848_SATUREGMIN 0 -#define BT848_SATUREGMAX 511 -#define BT848_SATUSTEPS 512 - -#define BT848_SATVMIN 0 -#define BT848_SATVMAX 284 -#define BT848_SATVCENTER 100 -#define BT848_SATVRANGE 283.89 -#define BT848_SATVREGMIN 0 -#define BT848_SATVREGMAX 511 -#define BT848_SATVSTEPS 512 - - -/* - * audio stuff - */ -#define AUDIO_TUNER 0x00 /* command for the audio routine */ -#define AUDIO_EXTERN 0x01 /* don't confuse them with bit */ -#define AUDIO_INTERN 0x02 /* settings */ -#define AUDIO_MUTE 0x80 -#define AUDIO_UNMUTE 0x81 - - -/* - * EEProm stuff - */ -struct eeProm { - short offset; - short count; - u_char bytes[ 256 ]; -}; - - -/* - * XXX: this is a hack, should be in ioctl_meteor.h - * here to avoid touching that file for now... - */ -#define TVTUNER_SETCHNL _IOW('x', 32, unsigned int) /* set channel */ -#define TVTUNER_GETCHNL _IOR('x', 32, unsigned int) /* get channel */ -#define TVTUNER_SETTYPE _IOW('x', 33, unsigned int) /* set tuner type */ -#define TVTUNER_GETTYPE _IOR('x', 33, unsigned int) /* get tuner type */ -#define TVTUNER_GETSTATUS _IOR('x', 34, unsigned int) /* get tuner status */ -#define TVTUNER_SETFREQ _IOW('x', 35, unsigned int) /* set frequency */ -#define TVTUNER_GETFREQ _IOR('x', 36, unsigned int) /* get frequency */ - - -#define BT848_SHUE _IOW('x', 37, int) /* set hue */ -#define BT848_GHUE _IOR('x', 37, int) /* get hue */ -#define BT848_SBRIG _IOW('x', 38, int) /* set brightness */ -#define BT848_GBRIG _IOR('x', 38, int) /* get brightness */ -#define BT848_SCSAT _IOW('x', 39, int) /* set chroma sat */ -#define BT848_GCSAT _IOR('x', 39, int) /* get UV saturation */ -#define BT848_SCONT _IOW('x', 40, int) /* set contrast */ -#define BT848_GCONT _IOR('x', 40, int) /* get contrast */ -#define BT848_SVSAT _IOW('x', 41, int) /* set chroma V sat */ -#define BT848_GVSAT _IOR('x', 41, int) /* get V saturation */ -#define BT848_SUSAT _IOW('x', 42, int) /* set chroma U sat */ -#define BT848_GUSAT _IOR('x', 42, int) /* get U saturation */ - -#define BT848_SCBARS _IOR('x', 43, int) /* set colorbar */ -#define BT848_CCBARS _IOR('x', 44, int) /* clear colorbar */ - - -#define BT848_SAUDIO _IOW('x', 46, int) /* set audio channel */ -#define BT848_GAUDIO _IOR('x', 47, int) /* get audio channel */ -#define BT848_SBTSC _IOW('x', 48, int) /* set audio channel */ - -#define BT848_GSTATUS _IOR('x', 49, unsigned int) /* reap status */ - -#define BT848_WEEPROM _IOWR('x', 50, struct eeProm) /* write to EEProm */ -#define BT848_REEPROM _IOWR('x', 51, struct eeProm) /* read from EEProm */ - -#define BT848_SIGNATURE _IOWR('x', 52, struct eeProm) /* read card sig */ - -#define TVTUNER_SETAFC _IOW('x', 53, int) /* turn AFC on/off */ -#define TVTUNER_GETAFC _IOR('x', 54, int) /* query AFC on/off */ -#define BT848_SLNOTCH _IOW('x', 55, int) /* set luma notch */ -#define BT848_GLNOTCH _IOR('x', 56, int) /* get luma notch */ - -/* Read/Write the BT848's I2C bus directly - * b7-b0: data (read/write) - * b15-b8: internal peripheral register (write) - * b23-b16: i2c addr (write) - * b31-b24: 1 = write, 0 = read - */ -#define BT848_I2CWR _IOWR('x', 57, u_long) /* i2c read-write */ - -struct bktr_msp_control { - unsigned char function; - unsigned int address; - unsigned int data; -}; - -#define BT848_MSP_RESET _IO('x', 76) /* MSP chip reset */ -#define BT848_MSP_READ _IOWR('x', 77, struct bktr_msp_control) /* MSP chip read */ -#define BT848_MSP_WRITE _IOWR('x', 78, struct bktr_msp_control) /* MSP chip write */ - -/* Support for radio tuner */ -#define RADIO_SETMODE _IOW('x', 58, unsigned int) /* set radio modes */ -#define RADIO_GETMODE _IOR('x', 58, unsigned char) /* get radio modes */ -#define RADIO_AFC 0x01 /* These modes will probably not */ -#define RADIO_MONO 0x02 /* work on the FRxxxx. It does */ -#define RADIO_MUTE 0x08 /* work on the FMxxxx. */ -#define RADIO_SETFREQ _IOW('x', 59, unsigned int) /* set frequency */ -#define RADIO_GETFREQ _IOR('x', 59, unsigned int) /* set frequency */ - /* Argument is frequency*100MHz */ - -/* - * XXX: more bad magic, - * we need to fix the METEORGINPUT to return something public - * duplicate them here for now... - */ -#define METEOR_DEV0 0x00001000 -#define METEOR_DEV1 0x00002000 -#define METEOR_DEV2 0x00004000 -#define METEOR_DEV3 0x00008000 -#define METEOR_DEV_SVIDEO 0x00006000 -/* - * right now I don't know were to put these, but as they are suppose to be - * a part of a common video capture interface, these should be relocated to - * another place. Probably most of the METEOR_xxx defines need to be - * renamed and moved to a common header - */ - -typedef enum { METEOR_PIXTYPE_RGB, METEOR_PIXTYPE_YUV, - METEOR_PIXTYPE_YUV_PACKED, - METEOR_PIXTYPE_YUV_12 } METEOR_PIXTYPE; - - -struct meteor_pixfmt { - u_int index; /* Index in supported pixfmt list */ - METEOR_PIXTYPE type; /* What's the board gonna feed us */ - u_int Bpp; /* Bytes per pixel */ - u_long masks[3]; /* R,G,B or Y,U,V masks, respectively */ - unsigned swap_bytes :1; /* Bytes swapped within shorts */ - unsigned swap_shorts:1; /* Shorts swapped within longs */ -}; - - -struct bktr_clip { - int x_min; - int x_max; - int y_min; - int y_max; -}; - -#define BT848_MAX_CLIP_NODE 100 -struct _bktr_clip { - struct bktr_clip x[BT848_MAX_CLIP_NODE]; -}; - -/* - * I'm using METEOR_xxx just because that will be common to other interface - * and less of a surprise - */ -#define METEORSACTPIXFMT _IOW('x', 64, int ) -#define METEORGACTPIXFMT _IOR('x', 64, int ) -#define METEORGSUPPIXFMT _IOWR('x', 65, struct meteor_pixfmt) - -/* set clip list */ -#define BT848SCLIP _IOW('x', 66, struct _bktr_clip ) -#define BT848GCLIP _IOR('x', 66, struct _bktr_clip ) - - -/* set input format */ -#define BT848SFMT _IOW('x', 67, unsigned long ) -#define BT848GFMT _IOR('x', 67, unsigned long ) - -/* set clear-buffer-on-start */ -#define BT848SCBUF _IOW('x', 68, int) -#define BT848GCBUF _IOR('x', 68, int) - -/* set capture area */ -/* The capture area is the area of the video image which is grabbed */ -/* Usually the capture area is 640x480 (768x576 PAL) pixels */ -/* This area is then scaled to the dimensions the user requires */ -/* using the METEORGEO ioctl */ -/* However, the capture area could be 400x300 pixels from the top right */ -/* corner of the video image */ -struct bktr_capture_area { - int x_offset; - int y_offset; - int x_size; - int y_size; -}; -#define BT848_SCAPAREA _IOW('x', 69, struct bktr_capture_area) -#define BT848_GCAPAREA _IOR('x', 69, struct bktr_capture_area) - - -/* Get channel Set */ -#define BT848_MAX_CHNLSET_NAME_LEN 16 -struct bktr_chnlset { - short index; - short max_channel; - char name[BT848_MAX_CHNLSET_NAME_LEN]; -}; -#define TVTUNER_GETCHNLSET _IOWR('x', 70, struct bktr_chnlset) - +#ifndef _MACHINE_IOCTL_BT848_H_ +#define _MACHINE_IOCTL_BT848_H_ +#ifdef __GNUC__ +#warning Include dev/bktr/ioctl_bt848.h instead of this header. +#endif -/* Infra Red Remote Control */ -struct bktr_remote { - unsigned char data[3]; -}; -#define REMOTE_GETKEY _IOR('x', 71, struct bktr_remote)/*read the remote */ - /*control receiver*/ - /*returns raw data*/ - - -/* - * Direct access to GPIO pins. You must add BKTR_GPIO_ACCESS to your kernel - * configuration file to use these - */ -#define BT848_GPIO_SET_EN _IOW('x', 72, int) /* set gpio_out_en */ -#define BT848_GPIO_GET_EN _IOR('x', 73, int) /* get gpio_out_en */ -#define BT848_GPIO_SET_DATA _IOW('x', 74, int) /* set gpio_data */ -#define BT848_GPIO_GET_DATA _IOR('x', 75, int) /* get gpio_data */ - - - -/* XXX - Copied from /sys/pci/brktree_reg.h */ -#define BT848_IFORM_FORMAT (0x7<<0) -# define BT848_IFORM_F_RSVD (0x7) -# define BT848_IFORM_F_SECAM (0x6) -# define BT848_IFORM_F_PALN (0x5) -# define BT848_IFORM_F_PALM (0x4) -# define BT848_IFORM_F_PALBDGHI (0x3) -# define BT848_IFORM_F_NTSCJ (0x2) -# define BT848_IFORM_F_NTSCM (0x1) -# define BT848_IFORM_F_AUTO (0x0) - +#include <dev/bktr/ioctl_bt848.h> #endif /* _MACHINE_IOCTL_BT848_H_ */ - |