diff options
Diffstat (limited to 'sys/gnu/dts/arm/omap-zoom-common.dtsi')
| -rw-r--r-- | sys/gnu/dts/arm/omap-zoom-common.dtsi | 91 |
1 files changed, 91 insertions, 0 deletions
diff --git a/sys/gnu/dts/arm/omap-zoom-common.dtsi b/sys/gnu/dts/arm/omap-zoom-common.dtsi new file mode 100644 index 0000000..46ef3e4 --- /dev/null +++ b/sys/gnu/dts/arm/omap-zoom-common.dtsi @@ -0,0 +1,91 @@ +/* + * Common features on the Zoom debug board + */ + +#include "omap-gpmc-smsc911x.dtsi" + +&gpmc { + ranges = <3 0 0x10000000 0x1000000>, /* CS3: 16MB for UART */ + <7 0 0x2c000000 0x01000000>; + + /* + * Four port TL16CP754C serial port on GPMC, + * they probably share the same GPIO IRQ + * REVISIT: Add timing support from slls644g.pdf + */ + uart@3,0 { + compatible = "ns16550a"; + reg = <3 0 8>; /* CS3, offset 0, IO size 8 */ + bank-width = <2>; + reg-shift = <1>; + reg-io-width = <1>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ + clock-frequency = <1843200>; + current-speed = <115200>; + gpmc,mux-add-data = <0>; + gpmc,device-width = <1>; + gpmc,wait-pin = <1>; + gpmc,cycle2cycle-samecsen = <1>; + gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cs-on-ns = <5>; + gpmc,cs-rd-off-ns = <155>; + gpmc,cs-wr-off-ns = <155>; + gpmc,adv-on-ns = <15>; + gpmc,adv-rd-off-ns = <40>; + gpmc,adv-wr-off-ns = <40>; + gpmc,oe-on-ns = <45>; + gpmc,oe-off-ns = <145>; + gpmc,we-on-ns = <45>; + gpmc,we-off-ns = <145>; + gpmc,rd-cycle-ns = <155>; + gpmc,wr-cycle-ns = <155>; + gpmc,access-ns = <145>; + gpmc,page-burst-access-ns = <20>; + gpmc,bus-turnaround-ns = <20>; + gpmc,cycle2cycle-delay-ns = <20>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-data-mux-bus-ns = <45>; + gpmc,wr-access-ns = <145>; + }; + uart@3,1 { + compatible = "ns16550a"; + reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */ + bank-width = <2>; + reg-shift = <1>; + reg-io-width = <1>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ + clock-frequency = <1843200>; + current-speed = <115200>; + }; + uart@3,2 { + compatible = "ns16550a"; + reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */ + bank-width = <2>; + reg-shift = <1>; + reg-io-width = <1>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ + clock-frequency = <1843200>; + current-speed = <115200>; + }; + uart@3,3 { + compatible = "ns16550a"; + reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */ + bank-width = <2>; + reg-shift = <1>; + reg-io-width = <1>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ + clock-frequency = <1843200>; + current-speed = <115200>; + }; + + ethernet@gpmc { + reg = <7 0 0xff>; + interrupt-parent = <&gpio5>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; /* gpio158 */ + }; +}; |
