diff options
Diffstat (limited to 'sys/gnu/dts/arm/at91-sama5d3_xplained.dts')
| -rw-r--r-- | sys/gnu/dts/arm/at91-sama5d3_xplained.dts | 229 |
1 files changed, 0 insertions, 229 deletions
diff --git a/sys/gnu/dts/arm/at91-sama5d3_xplained.dts b/sys/gnu/dts/arm/at91-sama5d3_xplained.dts deleted file mode 100644 index ce13755..0000000 --- a/sys/gnu/dts/arm/at91-sama5d3_xplained.dts +++ /dev/null @@ -1,229 +0,0 @@ -/* - * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board - * - * Copyright (C) 2014 Atmel, - * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * Licensed under GPLv2 or later. - */ -/dts-v1/; -#include "sama5d36.dtsi" - -/ { - model = "SAMA5D3 Xplained"; - compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - memory { - reg = <0x20000000 0x10000000>; - }; - - ahb { - apb { - mmc0: mmc@f0000000 { - pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <8>; - cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>; - }; - }; - - spi0: spi@f0004000 { - cs-gpios = <&pioD 13 0>; - status = "okay"; - }; - - can0: can@f000c000 { - status = "okay"; - }; - - i2c0: i2c@f0014000 { - status = "okay"; - }; - - i2c1: i2c@f0018000 { - status = "okay"; - }; - - macb0: ethernet@f0028000 { - phy-mode = "rgmii"; - status = "okay"; - }; - - usart0: serial@f001c000 { - status = "okay"; - }; - - usart1: serial@f0020000 { - pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; - status = "okay"; - }; - - uart0: serial@f0024000 { - status = "okay"; - }; - - mmc1: mmc@f8000000 { - pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; - status = "okay"; - slot@0 { - reg = <0>; - bus-width = <4>; - cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>; - }; - }; - - spi1: spi@f8008000 { - cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>; - status = "okay"; - }; - - adc0: adc@f8018000 { - pinctrl-0 = < - &pinctrl_adc0_adtrg - &pinctrl_adc0_ad0 - &pinctrl_adc0_ad1 - &pinctrl_adc0_ad2 - &pinctrl_adc0_ad3 - &pinctrl_adc0_ad4 - &pinctrl_adc0_ad5 - &pinctrl_adc0_ad6 - &pinctrl_adc0_ad7 - &pinctrl_adc0_ad8 - &pinctrl_adc0_ad9 - >; - status = "okay"; - }; - - i2c2: i2c@f801c000 { - dmas = <0>, <0>; /* Do not use DMA for i2c2 */ - status = "okay"; - }; - - macb1: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - - dbgu: serial@ffffee00 { - status = "okay"; - }; - - pinctrl@fffff200 { - board { - pinctrl_mmc0_cd: mmc0_cd { - atmel,pins = - <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - - pinctrl_mmc1_cd: mmc1_cd { - atmel,pins = - <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - - pinctrl_usba_vbus: usba_vbus { - atmel,pins = - <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */ - }; - }; - }; - - pmc: pmc@fffffc00 { - main: mainck { - clock-frequency = <12000000>; - }; - }; - }; - - nand0: nand@60000000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - atmel,has-pmecc; - atmel,pmecc-cap = <4>; - atmel,pmecc-sector-size = <512>; - nand-on-flash-bbt; - status = "okay"; - - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; - }; - - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; - }; - - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x600000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; - }; - }; - - usb0: gadget@00500000 { - atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usba_vbus>; - status = "okay"; - }; - - usb1: ohci@00600000 { - num-ports = <3>; - atmel,vbus-gpio = <0 - &pioE 3 GPIO_ACTIVE_LOW - &pioE 4 GPIO_ACTIVE_LOW - >; - status = "okay"; - }; - - usb2: ehci@00700000 { - status = "okay"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - - bp3 { - label = "PB_USER"; - gpios = <&pioE 29 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; - gpio-key,wakeup; - }; - }; - - leds { - compatible = "gpio-leds"; - - d2 { - label = "d2"; - gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */ - linux,default-trigger = "heartbeat"; - }; - - d3 { - label = "d3"; - gpios = <&pioE 24 GPIO_ACTIVE_HIGH>; - }; - }; -}; |
