diff options
Diffstat (limited to 'sys/dev/usb/usb_controller.h')
-rw-r--r-- | sys/dev/usb/usb_controller.h | 199 |
1 files changed, 199 insertions, 0 deletions
diff --git a/sys/dev/usb/usb_controller.h b/sys/dev/usb/usb_controller.h new file mode 100644 index 0000000..80633d9 --- /dev/null +++ b/sys/dev/usb/usb_controller.h @@ -0,0 +1,199 @@ +/* $FreeBSD$ */ +/*- + * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef _USB2_CONTROLLER_H_ +#define _USB2_CONTROLLER_H_ + +/* defines */ + +#define USB_BUS_DMA_TAG_MAX 8 + +/* structure prototypes */ + +struct usb2_bus; +struct usb2_page; +struct usb2_pipe; +struct usb2_page_cache; +struct usb2_setup_params; +struct usb2_hw_ep_profile; +struct usb2_fs_isoc_schedule; +struct usb2_config_descriptor; +struct usb2_endpoint_descriptor; + +/* typedefs */ + +typedef void (usb2_bus_mem_sub_cb_t)(struct usb2_bus *bus, struct usb2_page_cache *pc, struct usb2_page *pg, uint32_t size, uint32_t align); +typedef void (usb2_bus_mem_cb_t)(struct usb2_bus *bus, usb2_bus_mem_sub_cb_t *scb); + +/* + * The following structure is used to define all the USB BUS + * callbacks. + */ +struct usb2_bus_methods { + + /* USB Device and Host mode - Mandatory */ + + void (*pipe_init) (struct usb2_device *udev, struct usb2_endpoint_descriptor *edesc, struct usb2_pipe *pipe); + void (*do_poll) (struct usb2_bus *); + void (*xfer_setup) (struct usb2_setup_params *parm); + void (*xfer_unsetup) (struct usb2_xfer *xfer); + void (*get_dma_delay) (struct usb2_bus *, uint32_t *pdelay); + void (*device_suspend) (struct usb2_device *udev); + void (*device_resume) (struct usb2_device *udev); + void (*set_hw_power) (struct usb2_bus *bus); + /* + * The following flag is set if one or more control transfers are + * active: + */ +#define USB_HW_POWER_CONTROL 0x01 + /* + * The following flag is set if one or more bulk transfers are + * active: + */ +#define USB_HW_POWER_BULK 0x02 + /* + * The following flag is set if one or more interrupt transfers are + * active: + */ +#define USB_HW_POWER_INTERRUPT 0x04 + /* + * The following flag is set if one or more isochronous transfers + * are active: + */ +#define USB_HW_POWER_ISOC 0x08 + /* + * The following flag is set if one or more non-root-HUB devices + * are present on the given USB bus: + */ +#define USB_HW_POWER_NON_ROOT_HUB 0x10 + + /* USB Device mode only - Mandatory */ + + void (*get_hw_ep_profile) (struct usb2_device *udev, const struct usb2_hw_ep_profile **ppf, uint8_t ep_addr); + void (*set_stall) (struct usb2_device *udev, struct usb2_xfer *xfer, struct usb2_pipe *pipe); + void (*clear_stall) (struct usb2_device *udev, struct usb2_pipe *pipe); + + /* USB Device and Host mode - Optional */ + + void (*roothub_exec) (struct usb2_bus *); +}; + +/* + * The following structure is used to define all the USB pipe + * callbacks. + */ +struct usb2_pipe_methods { + + /* Mandatory USB Device and Host mode callbacks: */ + + void (*open) (struct usb2_xfer *xfer); + void (*close) (struct usb2_xfer *xfer); + + void (*enter) (struct usb2_xfer *xfer); + void (*start) (struct usb2_xfer *xfer); + + /* Optional */ + + void *info; + + /* Flags */ + + uint8_t enter_is_cancelable:1; + uint8_t start_is_cancelable:1; +}; + +/* + * The following structure keeps information about what a hardware USB + * endpoint supports. + */ +struct usb2_hw_ep_profile { + uint16_t max_in_frame_size; /* IN-token direction */ + uint16_t max_out_frame_size; /* OUT-token direction */ + uint8_t is_simplex:1; + uint8_t support_multi_buffer:1; + uint8_t support_bulk:1; + uint8_t support_control:1; + uint8_t support_interrupt:1; + uint8_t support_isochronous:1; + uint8_t support_in:1; /* IN-token is supported */ + uint8_t support_out:1; /* OUT-token is supported */ +}; + +/* + * The following structure is used when trying to allocate hardware + * endpoints for an USB configuration in USB device side mode. + */ +struct usb2_hw_ep_scratch_sub { + const struct usb2_hw_ep_profile *pf; + uint16_t max_frame_size; + uint8_t hw_endpoint_out; + uint8_t hw_endpoint_in; + uint8_t needs_ep_type; + uint8_t needs_in:1; + uint8_t needs_out:1; +}; + +/* + * The following structure is used when trying to allocate hardware + * endpoints for an USB configuration in USB device side mode. + */ +struct usb2_hw_ep_scratch { + struct usb2_hw_ep_scratch_sub ep[USB_EP_MAX]; + struct usb2_hw_ep_scratch_sub *ep_max; + struct usb2_config_descriptor *cd; + struct usb2_device *udev; + struct usb2_bus_methods *methods; + uint8_t bmOutAlloc[(USB_EP_MAX + 15) / 16]; + uint8_t bmInAlloc[(USB_EP_MAX + 15) / 16]; +}; + +/* + * The following structure is used when generating USB descriptors + * from USB templates. + */ +struct usb2_temp_setup { + void *buf; + uint32_t size; + uint8_t usb2_speed; + uint8_t self_powered; + uint8_t bNumEndpoints; + uint8_t bInterfaceNumber; + uint8_t bAlternateSetting; + uint8_t bConfigurationValue; + usb2_error_t err; +}; + +/* prototypes */ + +void usb2_bus_mem_flush_all(struct usb2_bus *bus, usb2_bus_mem_cb_t *cb); +uint8_t usb2_bus_mem_alloc_all(struct usb2_bus *bus, bus_dma_tag_t dmat, usb2_bus_mem_cb_t *cb); +void usb2_bus_mem_free_all(struct usb2_bus *bus, usb2_bus_mem_cb_t *cb); +void usb2_bus_roothub_exec(struct usb2_bus *bus); +uint16_t usb2_isoc_time_expand(struct usb2_bus *bus, uint16_t isoc_time_curr); +uint16_t usb2_fs_isoc_schedule_isoc_time_expand(struct usb2_device *udev, struct usb2_fs_isoc_schedule **pp_start, struct usb2_fs_isoc_schedule **pp_end, uint16_t isoc_time); +uint8_t usb2_fs_isoc_schedule_alloc(struct usb2_fs_isoc_schedule *fss, uint8_t *pstart, uint16_t len); + +#endif /* _USB2_CONTROLLER_H_ */ |