summaryrefslogtreecommitdiffstats
path: root/sys/dev/usb/usb.h
diff options
context:
space:
mode:
Diffstat (limited to 'sys/dev/usb/usb.h')
-rw-r--r--sys/dev/usb/usb.h619
1 files changed, 619 insertions, 0 deletions
diff --git a/sys/dev/usb/usb.h b/sys/dev/usb/usb.h
new file mode 100644
index 0000000..104ee36
--- /dev/null
+++ b/sys/dev/usb/usb.h
@@ -0,0 +1,619 @@
+/* $FreeBSD$ */
+/*-
+ * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
+ * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved.
+ * Copyright (c) 1998 Lennart Augustsson. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * This file contains standard definitions for the following USB
+ * protocol versions:
+ *
+ * USB v1.0
+ * USB v1.1
+ * USB v2.0
+ * USB v3.0
+ */
+
+#ifndef _USB2_STANDARD_H_
+#define _USB2_STANDARD_H_
+
+#include <dev/usb/usb_endian.h>
+
+/*
+ * Minimum time a device needs to be powered down to go through a
+ * power cycle. These values are not in the USB specification.
+ */
+#define USB_POWER_DOWN_TIME 200 /* ms */
+#define USB_PORT_POWER_DOWN_TIME 100 /* ms */
+
+/* Definition of software USB power modes */
+#define USB_POWER_MODE_OFF 0 /* turn off device */
+#define USB_POWER_MODE_ON 1 /* always on */
+#define USB_POWER_MODE_SAVE 2 /* automatic suspend and resume */
+#define USB_POWER_MODE_SUSPEND 3 /* force suspend */
+#define USB_POWER_MODE_RESUME 4 /* force resume */
+
+#if 0
+/* These are the values from the USB specification. */
+#define USB_PORT_RESET_DELAY 10 /* ms */
+#define USB_PORT_ROOT_RESET_DELAY 50 /* ms */
+#define USB_PORT_RESET_RECOVERY 10 /* ms */
+#define USB_PORT_POWERUP_DELAY 100 /* ms */
+#define USB_PORT_RESUME_DELAY 20 /* ms */
+#define USB_SET_ADDRESS_SETTLE 2 /* ms */
+#define USB_RESUME_DELAY (20*5) /* ms */
+#define USB_RESUME_WAIT 10 /* ms */
+#define USB_RESUME_RECOVERY 10 /* ms */
+#define USB_EXTRA_POWER_UP_TIME 0 /* ms */
+#else
+/* Allow for marginal and non-conforming devices. */
+#define USB_PORT_RESET_DELAY 50 /* ms */
+#define USB_PORT_ROOT_RESET_DELAY 250 /* ms */
+#define USB_PORT_RESET_RECOVERY 250 /* ms */
+#define USB_PORT_POWERUP_DELAY 300 /* ms */
+#define USB_PORT_RESUME_DELAY (20*2) /* ms */
+#define USB_SET_ADDRESS_SETTLE 10 /* ms */
+#define USB_RESUME_DELAY (50*5) /* ms */
+#define USB_RESUME_WAIT 50 /* ms */
+#define USB_RESUME_RECOVERY 50 /* ms */
+#define USB_EXTRA_POWER_UP_TIME 20 /* ms */
+#endif
+
+#define USB_MIN_POWER 100 /* mA */
+#define USB_MAX_POWER 500 /* mA */
+
+#define USB_BUS_RESET_DELAY 100 /* ms */
+
+/*
+ * USB record layout in memory:
+ *
+ * - USB config 0
+ * - USB interfaces
+ * - USB alternative interfaces
+ * - USB pipes
+ *
+ * - USB config 1
+ * - USB interfaces
+ * - USB alternative interfaces
+ * - USB pipes
+ */
+
+/* Declaration of USB records */
+
+struct usb2_device_request {
+ uByte bmRequestType;
+ uByte bRequest;
+ uWord wValue;
+ uWord wIndex;
+ uWord wLength;
+} __packed;
+
+#define UT_WRITE 0x00
+#define UT_READ 0x80
+#define UT_STANDARD 0x00
+#define UT_CLASS 0x20
+#define UT_VENDOR 0x40
+#define UT_DEVICE 0x00
+#define UT_INTERFACE 0x01
+#define UT_ENDPOINT 0x02
+#define UT_OTHER 0x03
+
+#define UT_READ_DEVICE (UT_READ | UT_STANDARD | UT_DEVICE)
+#define UT_READ_INTERFACE (UT_READ | UT_STANDARD | UT_INTERFACE)
+#define UT_READ_ENDPOINT (UT_READ | UT_STANDARD | UT_ENDPOINT)
+#define UT_WRITE_DEVICE (UT_WRITE | UT_STANDARD | UT_DEVICE)
+#define UT_WRITE_INTERFACE (UT_WRITE | UT_STANDARD | UT_INTERFACE)
+#define UT_WRITE_ENDPOINT (UT_WRITE | UT_STANDARD | UT_ENDPOINT)
+#define UT_READ_CLASS_DEVICE (UT_READ | UT_CLASS | UT_DEVICE)
+#define UT_READ_CLASS_INTERFACE (UT_READ | UT_CLASS | UT_INTERFACE)
+#define UT_READ_CLASS_OTHER (UT_READ | UT_CLASS | UT_OTHER)
+#define UT_READ_CLASS_ENDPOINT (UT_READ | UT_CLASS | UT_ENDPOINT)
+#define UT_WRITE_CLASS_DEVICE (UT_WRITE | UT_CLASS | UT_DEVICE)
+#define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE)
+#define UT_WRITE_CLASS_OTHER (UT_WRITE | UT_CLASS | UT_OTHER)
+#define UT_WRITE_CLASS_ENDPOINT (UT_WRITE | UT_CLASS | UT_ENDPOINT)
+#define UT_READ_VENDOR_DEVICE (UT_READ | UT_VENDOR | UT_DEVICE)
+#define UT_READ_VENDOR_INTERFACE (UT_READ | UT_VENDOR | UT_INTERFACE)
+#define UT_READ_VENDOR_OTHER (UT_READ | UT_VENDOR | UT_OTHER)
+#define UT_READ_VENDOR_ENDPOINT (UT_READ | UT_VENDOR | UT_ENDPOINT)
+#define UT_WRITE_VENDOR_DEVICE (UT_WRITE | UT_VENDOR | UT_DEVICE)
+#define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE)
+#define UT_WRITE_VENDOR_OTHER (UT_WRITE | UT_VENDOR | UT_OTHER)
+#define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT)
+
+/* Requests */
+#define UR_GET_STATUS 0x00
+#define UR_CLEAR_FEATURE 0x01
+#define UR_SET_FEATURE 0x03
+#define UR_SET_ADDRESS 0x05
+#define UR_GET_DESCRIPTOR 0x06
+#define UDESC_DEVICE 0x01
+#define UDESC_CONFIG 0x02
+#define UDESC_STRING 0x03
+#define USB_LANGUAGE_TABLE 0x00 /* language ID string index */
+#define UDESC_INTERFACE 0x04
+#define UDESC_ENDPOINT 0x05
+#define UDESC_DEVICE_QUALIFIER 0x06
+#define UDESC_OTHER_SPEED_CONFIGURATION 0x07
+#define UDESC_INTERFACE_POWER 0x08
+#define UDESC_OTG 0x09
+#define UDESC_DEBUG 0x0A
+#define UDESC_IFACE_ASSOC 0x0B /* interface association */
+#define UDESC_BOS 0x0F /* binary object store */
+#define UDESC_DEVICE_CAPABILITY 0x10
+#define UDESC_CS_DEVICE 0x21 /* class specific */
+#define UDESC_CS_CONFIG 0x22
+#define UDESC_CS_STRING 0x23
+#define UDESC_CS_INTERFACE 0x24
+#define UDESC_CS_ENDPOINT 0x25
+#define UDESC_HUB 0x29
+#define UDESC_ENDPOINT_SS_COMP 0x30 /* super speed */
+#define UR_SET_DESCRIPTOR 0x07
+#define UR_GET_CONFIG 0x08
+#define UR_SET_CONFIG 0x09
+#define UR_GET_INTERFACE 0x0a
+#define UR_SET_INTERFACE 0x0b
+#define UR_SYNCH_FRAME 0x0c
+#define UR_SET_SEL 0x30
+#define UR_ISOCH_DELAY 0x31
+
+/* HUB specific request */
+#define UR_GET_BUS_STATE 0x02
+#define UR_CLEAR_TT_BUFFER 0x08
+#define UR_RESET_TT 0x09
+#define UR_GET_TT_STATE 0x0a
+#define UR_STOP_TT 0x0b
+#define UR_SET_HUB_DEPTH 0x0c
+#define UR_GET_PORT_ERR_COUNT 0x0d
+
+/* Feature numbers */
+#define UF_ENDPOINT_HALT 0
+#define UF_DEVICE_REMOTE_WAKEUP 1
+#define UF_TEST_MODE 2
+#define UF_U1_ENABLE 0x30
+#define UF_U2_ENABLE 0x31
+#define UF_LTM_ENABLE 0x32
+
+/* HUB specific features */
+#define UHF_C_HUB_LOCAL_POWER 0
+#define UHF_C_HUB_OVER_CURRENT 1
+#define UHF_PORT_CONNECTION 0
+#define UHF_PORT_ENABLE 1
+#define UHF_PORT_SUSPEND 2
+#define UHF_PORT_OVER_CURRENT 3
+#define UHF_PORT_RESET 4
+#define UHF_PORT_LINK_STATE 5
+#define UHF_PORT_POWER 8
+#define UHF_PORT_LOW_SPEED 9
+#define UHF_C_PORT_CONNECTION 16
+#define UHF_C_PORT_ENABLE 17
+#define UHF_C_PORT_SUSPEND 18
+#define UHF_C_PORT_OVER_CURRENT 19
+#define UHF_C_PORT_RESET 20
+#define UHF_PORT_TEST 21
+#define UHF_PORT_INDICATOR 22
+
+/* SuperSpeed HUB specific features */
+#define UHF_PORT_U1_TIMEOUT 23
+#define UHF_PORT_U2_TIMEOUT 24
+#define UHF_C_PORT_LINK_STATE 25
+#define UHF_C_PORT_CONFIG_ERROR 26
+#define UHF_PORT_REMOTE_WAKE_MASK 27
+#define UHF_BH_PORT_RESET 28
+#define UHF_C_BH_PORT_RESET 29
+#define UHF_FORCE_LINKPM_ACCEPT 30
+
+struct usb2_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uByte bDescriptorSubtype;
+} __packed;
+
+struct usb2_device_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uWord bcdUSB;
+#define UD_USB_2_0 0x0200
+#define UD_USB_3_0 0x0300
+#define UD_IS_USB2(d) ((d)->bcdUSB[1] == 0x02)
+#define UD_IS_USB3(d) ((d)->bcdUSB[1] == 0x03)
+ uByte bDeviceClass;
+ uByte bDeviceSubClass;
+ uByte bDeviceProtocol;
+ uByte bMaxPacketSize;
+ /* The fields below are not part of the initial descriptor. */
+ uWord idVendor;
+ uWord idProduct;
+ uWord bcdDevice;
+ uByte iManufacturer;
+ uByte iProduct;
+ uByte iSerialNumber;
+ uByte bNumConfigurations;
+} __packed;
+
+/* Binary Device Object Store (BOS) */
+struct usb2_bos_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uWord wTotalLength;
+ uByte bNumDeviceCaps;
+} __packed;
+
+/* Binary Device Object Store Capability */
+struct usb2_bos_cap_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uByte bDevCapabilityType;
+#define USB_DEVCAP_RESERVED 0x00
+#define USB_DEVCAP_WUSB 0x01
+#define USB_DEVCAP_USB2EXT 0x02
+#define USB_DEVCAP_SUPER_SPEED 0x03
+#define USB_DEVCAP_CONTAINER_ID 0x04
+ /* data ... */
+} __packed;
+
+struct usb2_devcap_usb2ext_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uByte bDevCapabilityType;
+ uByte bmAttributes;
+#define USB_V2EXT_LPM 0x02
+} __packed;
+
+struct usb2_devcap_ss_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uByte bDevCapabilityType;
+ uByte bmAttributes;
+ uWord wSpeedsSupported;
+ uByte bFunctionaltySupport;
+ uByte bU1DevExitLat;
+ uByte bU2DevExitLat;
+} __packed;
+
+struct usb2_devcap_container_id_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uByte bDevCapabilityType;
+ uByte bReserved;
+ uByte ContainerID;
+} __packed;
+
+/* Device class codes */
+#define UDCLASS_IN_INTERFACE 0x00
+#define UDCLASS_COMM 0x02
+#define UDCLASS_HUB 0x09
+#define UDSUBCLASS_HUB 0x00
+#define UDPROTO_FSHUB 0x00
+#define UDPROTO_HSHUBSTT 0x01
+#define UDPROTO_HSHUBMTT 0x02
+#define UDCLASS_DIAGNOSTIC 0xdc
+#define UDCLASS_WIRELESS 0xe0
+#define UDSUBCLASS_RF 0x01
+#define UDPROTO_BLUETOOTH 0x01
+#define UDCLASS_VENDOR 0xff
+
+struct usb2_config_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uWord wTotalLength;
+ uByte bNumInterface;
+ uByte bConfigurationValue;
+#define USB_UNCONFIG_NO 0
+ uByte iConfiguration;
+ uByte bmAttributes;
+#define UC_BUS_POWERED 0x80
+#define UC_SELF_POWERED 0x40
+#define UC_REMOTE_WAKEUP 0x20
+ uByte bMaxPower; /* max current in 2 mA units */
+#define UC_POWER_FACTOR 2
+} __packed;
+
+struct usb2_interface_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uByte bInterfaceNumber;
+ uByte bAlternateSetting;
+ uByte bNumEndpoints;
+ uByte bInterfaceClass;
+ uByte bInterfaceSubClass;
+ uByte bInterfaceProtocol;
+ uByte iInterface;
+} __packed;
+
+struct usb2_interface_assoc_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uByte bFirstInterface;
+ uByte bInterfaceCount;
+ uByte bFunctionClass;
+ uByte bFunctionSubClass;
+ uByte bFunctionProtocol;
+ uByte iFunction;
+} __packed;
+
+/* Interface class codes */
+#define UICLASS_UNSPEC 0x00
+#define UICLASS_AUDIO 0x01 /* audio */
+#define UISUBCLASS_AUDIOCONTROL 1
+#define UISUBCLASS_AUDIOSTREAM 2
+#define UISUBCLASS_MIDISTREAM 3
+
+#define UICLASS_CDC 0x02 /* communication */
+#define UISUBCLASS_DIRECT_LINE_CONTROL_MODEL 1
+#define UISUBCLASS_ABSTRACT_CONTROL_MODEL 2
+#define UISUBCLASS_TELEPHONE_CONTROL_MODEL 3
+#define UISUBCLASS_MULTICHANNEL_CONTROL_MODEL 4
+#define UISUBCLASS_CAPI_CONTROLMODEL 5
+#define UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6
+#define UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7
+#define UISUBCLASS_WIRELESS_HANDSET_CM 8
+#define UISUBCLASS_DEVICE_MGMT 9
+#define UISUBCLASS_MOBILE_DIRECT_LINE_MODEL 10
+#define UISUBCLASS_OBEX 11
+#define UISUBCLASS_ETHERNET_EMULATION_MODEL 12
+
+#define UIPROTO_CDC_AT 1
+#define UIPROTO_CDC_ETH_512X4 0x76 /* FreeBSD specific */
+
+#define UICLASS_HID 0x03
+#define UISUBCLASS_BOOT 1
+#define UIPROTO_BOOT_KEYBOARD 1
+#define UIPROTO_MOUSE 2
+
+#define UICLASS_PHYSICAL 0x05
+#define UICLASS_IMAGE 0x06
+#define UISUBCLASS_SIC 1 /* still image class */
+#define UICLASS_PRINTER 0x07
+#define UISUBCLASS_PRINTER 1
+#define UIPROTO_PRINTER_UNI 1
+#define UIPROTO_PRINTER_BI 2
+#define UIPROTO_PRINTER_1284 3
+
+#define UICLASS_MASS 0x08
+#define UISUBCLASS_RBC 1
+#define UISUBCLASS_SFF8020I 2
+#define UISUBCLASS_QIC157 3
+#define UISUBCLASS_UFI 4
+#define UISUBCLASS_SFF8070I 5
+#define UISUBCLASS_SCSI 6
+#define UIPROTO_MASS_CBI_I 0
+#define UIPROTO_MASS_CBI 1
+#define UIPROTO_MASS_BBB_OLD 2 /* Not in the spec anymore */
+#define UIPROTO_MASS_BBB 80 /* 'P' for the Iomega Zip drive */
+
+#define UICLASS_HUB 0x09
+#define UISUBCLASS_HUB 0
+#define UIPROTO_FSHUB 0
+#define UIPROTO_HSHUBSTT 0 /* Yes, same as previous */
+#define UIPROTO_HSHUBMTT 1
+
+#define UICLASS_CDC_DATA 0x0a
+#define UISUBCLASS_DATA 0
+#define UIPROTO_DATA_ISDNBRI 0x30 /* Physical iface */
+#define UIPROTO_DATA_HDLC 0x31 /* HDLC */
+#define UIPROTO_DATA_TRANSPARENT 0x32 /* Transparent */
+#define UIPROTO_DATA_Q921M 0x50 /* Management for Q921 */
+#define UIPROTO_DATA_Q921 0x51 /* Data for Q921 */
+#define UIPROTO_DATA_Q921TM 0x52 /* TEI multiplexer for Q921 */
+#define UIPROTO_DATA_V42BIS 0x90 /* Data compression */
+#define UIPROTO_DATA_Q931 0x91 /* Euro-ISDN */
+#define UIPROTO_DATA_V120 0x92 /* V.24 rate adaption */
+#define UIPROTO_DATA_CAPI 0x93 /* CAPI 2.0 commands */
+#define UIPROTO_DATA_HOST_BASED 0xfd /* Host based driver */
+#define UIPROTO_DATA_PUF 0xfe /* see Prot. Unit Func. Desc. */
+#define UIPROTO_DATA_VENDOR 0xff /* Vendor specific */
+
+#define UICLASS_SMARTCARD 0x0b
+#define UICLASS_FIRM_UPD 0x0c
+#define UICLASS_SECURITY 0x0d
+#define UICLASS_DIAGNOSTIC 0xdc
+#define UICLASS_WIRELESS 0xe0
+#define UISUBCLASS_RF 0x01
+#define UIPROTO_BLUETOOTH 0x01
+
+#define UICLASS_APPL_SPEC 0xfe
+#define UISUBCLASS_FIRMWARE_DOWNLOAD 1
+#define UISUBCLASS_IRDA 2
+#define UIPROTO_IRDA 0
+
+#define UICLASS_VENDOR 0xff
+#define UISUBCLASS_XBOX360_CONTROLLER 0x5d
+#define UIPROTO_XBOX360_GAMEPAD 0x01
+
+struct usb2_endpoint_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uByte bEndpointAddress;
+#define UE_GET_DIR(a) ((a) & 0x80)
+#define UE_SET_DIR(a,d) ((a) | (((d)&1) << 7))
+#define UE_DIR_IN 0x80
+#define UE_DIR_OUT 0x00
+#define UE_DIR_ANY 0xff /* for internal use only! */
+#define UE_ADDR 0x0f
+#define UE_ADDR_ANY 0xff /* for internal use only! */
+#define UE_GET_ADDR(a) ((a) & UE_ADDR)
+ uByte bmAttributes;
+#define UE_XFERTYPE 0x03
+#define UE_CONTROL 0x00
+#define UE_ISOCHRONOUS 0x01
+#define UE_BULK 0x02
+#define UE_INTERRUPT 0x03
+#define UE_BULK_INTR 0xfe /* for internal use only! */
+#define UE_TYPE_ANY 0xff /* for internal use only! */
+#define UE_GET_XFERTYPE(a) ((a) & UE_XFERTYPE)
+#define UE_ISO_TYPE 0x0c
+#define UE_ISO_ASYNC 0x04
+#define UE_ISO_ADAPT 0x08
+#define UE_ISO_SYNC 0x0c
+#define UE_GET_ISO_TYPE(a) ((a) & UE_ISO_TYPE)
+ uWord wMaxPacketSize;
+#define UE_ZERO_MPS 0xFFFF /* for internal use only */
+ uByte bInterval;
+} __packed;
+
+struct usb2_endpoint_ss_comp_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uWord bMaxBurst;
+ uByte bmAttributes;
+ uWord wBytesPerInterval;
+} __packed;
+
+struct usb2_string_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uWord bString[126];
+ uByte bUnused;
+} __packed;
+
+#define USB_MAKE_STRING_DESC(m,name) \
+struct name { \
+ uByte bLength; \
+ uByte bDescriptorType; \
+ uByte bData[sizeof((uint8_t []){m})]; \
+} __packed; \
+static const struct name name = { \
+ .bLength = sizeof(struct name), \
+ .bDescriptorType = UDESC_STRING, \
+ .bData = { m }, \
+}
+
+struct usb2_hub_descriptor {
+ uByte bDescLength;
+ uByte bDescriptorType;
+ uByte bNbrPorts;
+ uWord wHubCharacteristics;
+#define UHD_PWR 0x0003
+#define UHD_PWR_GANGED 0x0000
+#define UHD_PWR_INDIVIDUAL 0x0001
+#define UHD_PWR_NO_SWITCH 0x0002
+#define UHD_COMPOUND 0x0004
+#define UHD_OC 0x0018
+#define UHD_OC_GLOBAL 0x0000
+#define UHD_OC_INDIVIDUAL 0x0008
+#define UHD_OC_NONE 0x0010
+#define UHD_TT_THINK 0x0060
+#define UHD_TT_THINK_8 0x0000
+#define UHD_TT_THINK_16 0x0020
+#define UHD_TT_THINK_24 0x0040
+#define UHD_TT_THINK_32 0x0060
+#define UHD_PORT_IND 0x0080
+ uByte bPwrOn2PwrGood; /* delay in 2 ms units */
+#define UHD_PWRON_FACTOR 2
+ uByte bHubContrCurrent;
+ uByte DeviceRemovable[32]; /* max 255 ports */
+#define UHD_NOT_REMOV(desc, i) \
+ (((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1)
+ uByte PortPowerCtrlMask[1]; /* deprecated */
+} __packed;
+
+struct usb2_hub_ss_descriptor {
+ uByte bDescLength;
+ uByte bDescriptorType;
+ uByte bNbrPorts; /* max 15 */
+ uWord wHubCharacteristics;
+ uByte bPwrOn2PwrGood; /* delay in 2 ms units */
+ uByte bHubContrCurrent;
+ uByte bHubHdrDecLat;
+ uWord wHubDelay;
+ uByte DeviceRemovable[2]; /* max 15 ports */
+} __packed;
+
+/* minimum HUB descriptor (8-ports maximum) */
+struct usb2_hub_descriptor_min {
+ uByte bDescLength;
+ uByte bDescriptorType;
+ uByte bNbrPorts;
+ uWord wHubCharacteristics;
+ uByte bPwrOn2PwrGood;
+ uByte bHubContrCurrent;
+ uByte DeviceRemovable[1];
+ uByte PortPowerCtrlMask[1];
+} __packed;
+
+struct usb2_device_qualifier {
+ uByte bLength;
+ uByte bDescriptorType;
+ uWord bcdUSB;
+ uByte bDeviceClass;
+ uByte bDeviceSubClass;
+ uByte bDeviceProtocol;
+ uByte bMaxPacketSize0;
+ uByte bNumConfigurations;
+ uByte bReserved;
+} __packed;
+
+struct usb2_otg_descriptor {
+ uByte bLength;
+ uByte bDescriptorType;
+ uByte bmAttributes;
+#define UOTG_SRP 0x01
+#define UOTG_HNP 0x02
+} __packed;
+
+/* OTG feature selectors */
+#define UOTG_B_HNP_ENABLE 3
+#define UOTG_A_HNP_SUPPORT 4
+#define UOTG_A_ALT_HNP_SUPPORT 5
+
+struct usb2_status {
+ uWord wStatus;
+/* Device status flags */
+#define UDS_SELF_POWERED 0x0001
+#define UDS_REMOTE_WAKEUP 0x0002
+/* Endpoint status flags */
+#define UES_HALT 0x0001
+} __packed;
+
+struct usb2_hub_status {
+ uWord wHubStatus;
+#define UHS_LOCAL_POWER 0x0001
+#define UHS_OVER_CURRENT 0x0002
+ uWord wHubChange;
+} __packed;
+
+struct usb2_port_status {
+ uWord wPortStatus;
+#define UPS_CURRENT_CONNECT_STATUS 0x0001
+#define UPS_PORT_ENABLED 0x0002
+#define UPS_SUSPEND 0x0004
+#define UPS_OVERCURRENT_INDICATOR 0x0008
+#define UPS_RESET 0x0010
+#define UPS_PORT_POWER 0x0100
+#define UPS_LOW_SPEED 0x0200
+#define UPS_HIGH_SPEED 0x0400
+#define UPS_PORT_TEST 0x0800
+#define UPS_PORT_INDICATOR 0x1000
+#define UPS_PORT_MODE_DEVICE 0x8000 /* currently FreeBSD specific */
+ uWord wPortChange;
+#define UPS_C_CONNECT_STATUS 0x0001
+#define UPS_C_PORT_ENABLED 0x0002
+#define UPS_C_SUSPEND 0x0004
+#define UPS_C_OVERCURRENT_INDICATOR 0x0008
+#define UPS_C_PORT_RESET 0x0010
+} __packed;
+
+#endif /* _USB2_STANDARD_H_ */
OpenPOWER on IntegriCloud