diff options
Diffstat (limited to 'sys/dev/usb/serial/umodem.c')
-rw-r--r-- | sys/dev/usb/serial/umodem.c | 788 |
1 files changed, 788 insertions, 0 deletions
diff --git a/sys/dev/usb/serial/umodem.c b/sys/dev/usb/serial/umodem.c new file mode 100644 index 0000000..44813dd --- /dev/null +++ b/sys/dev/usb/serial/umodem.c @@ -0,0 +1,788 @@ +/* $NetBSD: umodem.c,v 1.45 2002/09/23 05:51:23 simonb Exp $ */ + +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +/*- + * Copyright (c) 2003, M. Warner Losh <imp@freebsd.org>. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +/*- + * Copyright (c) 1998 The NetBSD Foundation, Inc. + * All rights reserved. + * + * This code is derived from software contributed to The NetBSD Foundation + * by Lennart Augustsson (lennart@augustsson.net) at + * Carlstedt Research & Technology. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the NetBSD + * Foundation, Inc. and its contributors. + * 4. Neither the name of The NetBSD Foundation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * Comm Class spec: http://www.usb.org/developers/devclass_docs/usbccs10.pdf + * http://www.usb.org/developers/devclass_docs/usbcdc11.pdf + */ + +/* + * TODO: + * - Add error recovery in various places; the big problem is what + * to do in a callback if there is an error. + * - Implement a Call Device for modems without multiplexed commands. + * + */ + +#include "usbdevs.h" +#include <dev/usb/usb.h> +#include <dev/usb/usb_mfunc.h> +#include <dev/usb/usb_error.h> +#include <dev/usb/usb_cdc.h> +#include <dev/usb/usb_ioctl.h> +#include <dev/usb/usb_defs.h> + +#define USB_DEBUG_VAR umodem_debug + +#include <dev/usb/usb_core.h> +#include <dev/usb/usb_debug.h> +#include <dev/usb/usb_process.h> +#include <dev/usb/usb_request.h> +#include <dev/usb/usb_lookup.h> +#include <dev/usb/usb_util.h> +#include <dev/usb/usb_busdma.h> +#include <dev/usb/usb_device.h> + +#include <dev/usb/serial/usb_serial.h> + +#if USB_DEBUG +static int umodem_debug = 0; + +SYSCTL_NODE(_hw_usb2, OID_AUTO, umodem, CTLFLAG_RW, 0, "USB umodem"); +SYSCTL_INT(_hw_usb2_umodem, OID_AUTO, debug, CTLFLAG_RW, + &umodem_debug, 0, "Debug level"); +#endif + +static const struct usb2_device_id umodem_devs[] = { + /* Generic Modem class match */ + {USB_IFACE_CLASS(UICLASS_CDC), + USB_IFACE_SUBCLASS(UISUBCLASS_ABSTRACT_CONTROL_MODEL), + USB_IFACE_PROTOCOL(UIPROTO_CDC_AT)}, + /* Kyocera AH-K3001V */ + {USB_VPI(USB_VENDOR_KYOCERA, USB_PRODUCT_KYOCERA_AHK3001V, 1)}, + {USB_VPI(USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC5720, 1)}, + {USB_VPI(USB_VENDOR_CURITEL, USB_PRODUCT_CURITEL_PC5740, 1)}, +}; + +/* + * As speeds for umodem deivces increase, these numbers will need to + * be increased. They should be good for G3 speeds and below. + * + * TODO: The TTY buffers should be increased! + */ +#define UMODEM_BUF_SIZE 1024 + +enum { + UMODEM_BULK_WR, + UMODEM_BULK_RD, + UMODEM_INTR_RD, + UMODEM_N_TRANSFER, +}; + +#define UMODEM_MODVER 1 /* module version */ + +struct umodem_softc { + struct usb2_com_super_softc sc_super_ucom; + struct usb2_com_softc sc_ucom; + + struct usb2_xfer *sc_xfer[UMODEM_N_TRANSFER]; + struct usb2_device *sc_udev; + + uint16_t sc_line; + + uint8_t sc_lsr; /* local status register */ + uint8_t sc_msr; /* modem status register */ + uint8_t sc_ctrl_iface_no; + uint8_t sc_data_iface_no; + uint8_t sc_iface_index[2]; + uint8_t sc_cm_over_data; + uint8_t sc_cm_cap; /* CM capabilities */ + uint8_t sc_acm_cap; /* ACM capabilities */ +}; + +static device_probe_t umodem_probe; +static device_attach_t umodem_attach; +static device_detach_t umodem_detach; + +static usb2_callback_t umodem_intr_callback; +static usb2_callback_t umodem_write_callback; +static usb2_callback_t umodem_read_callback; + +static void umodem_start_read(struct usb2_com_softc *); +static void umodem_stop_read(struct usb2_com_softc *); +static void umodem_start_write(struct usb2_com_softc *); +static void umodem_stop_write(struct usb2_com_softc *); +static void umodem_get_caps(struct usb2_attach_arg *, uint8_t *, uint8_t *); +static void umodem_cfg_get_status(struct usb2_com_softc *, uint8_t *, + uint8_t *); +static int umodem_pre_param(struct usb2_com_softc *, struct termios *); +static void umodem_cfg_param(struct usb2_com_softc *, struct termios *); +static int umodem_ioctl(struct usb2_com_softc *, uint32_t, caddr_t, int, + struct thread *); +static void umodem_cfg_set_dtr(struct usb2_com_softc *, uint8_t); +static void umodem_cfg_set_rts(struct usb2_com_softc *, uint8_t); +static void umodem_cfg_set_break(struct usb2_com_softc *, uint8_t); +static void *umodem_get_desc(struct usb2_attach_arg *, uint8_t, uint8_t); +static usb2_error_t umodem_set_comm_feature(struct usb2_device *, uint8_t, + uint16_t, uint16_t); + +static const struct usb2_config umodem_config[UMODEM_N_TRANSFER] = { + + [UMODEM_BULK_WR] = { + .type = UE_BULK, + .endpoint = UE_ADDR_ANY, + .direction = UE_DIR_OUT, + .if_index = 0, + .mh.bufsize = UMODEM_BUF_SIZE, + .mh.flags = {.pipe_bof = 1,.force_short_xfer = 1,}, + .mh.callback = &umodem_write_callback, + }, + + [UMODEM_BULK_RD] = { + .type = UE_BULK, + .endpoint = UE_ADDR_ANY, + .direction = UE_DIR_IN, + .if_index = 0, + .mh.bufsize = UMODEM_BUF_SIZE, + .mh.flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, + .mh.callback = &umodem_read_callback, + }, + + [UMODEM_INTR_RD] = { + .type = UE_INTERRUPT, + .endpoint = UE_ADDR_ANY, + .direction = UE_DIR_IN, + .if_index = 1, + .mh.flags = {.pipe_bof = 1,.short_xfer_ok = 1,.no_pipe_ok = 1,}, + .mh.bufsize = 0, /* use wMaxPacketSize */ + .mh.callback = &umodem_intr_callback, + }, +}; + +static const struct usb2_com_callback umodem_callback = { + .usb2_com_cfg_get_status = &umodem_cfg_get_status, + .usb2_com_cfg_set_dtr = &umodem_cfg_set_dtr, + .usb2_com_cfg_set_rts = &umodem_cfg_set_rts, + .usb2_com_cfg_set_break = &umodem_cfg_set_break, + .usb2_com_cfg_param = &umodem_cfg_param, + .usb2_com_pre_param = &umodem_pre_param, + .usb2_com_ioctl = &umodem_ioctl, + .usb2_com_start_read = &umodem_start_read, + .usb2_com_stop_read = &umodem_stop_read, + .usb2_com_start_write = &umodem_start_write, + .usb2_com_stop_write = &umodem_stop_write, +}; + +static device_method_t umodem_methods[] = { + DEVMETHOD(device_probe, umodem_probe), + DEVMETHOD(device_attach, umodem_attach), + DEVMETHOD(device_detach, umodem_detach), + {0, 0} +}; + +static devclass_t umodem_devclass; + +static driver_t umodem_driver = { + .name = "umodem", + .methods = umodem_methods, + .size = sizeof(struct umodem_softc), +}; + +DRIVER_MODULE(umodem, ushub, umodem_driver, umodem_devclass, NULL, 0); +MODULE_DEPEND(umodem, ucom, 1, 1, 1); +MODULE_DEPEND(umodem, usb, 1, 1, 1); +MODULE_VERSION(umodem, UMODEM_MODVER); + +static int +umodem_probe(device_t dev) +{ + struct usb2_attach_arg *uaa = device_get_ivars(dev); + uint8_t cm; + uint8_t acm; + int error; + + DPRINTFN(11, "\n"); + + if (uaa->usb2_mode != USB_MODE_HOST) { + return (ENXIO); + } + error = usb2_lookup_id_by_uaa(umodem_devs, sizeof(umodem_devs), uaa); + if (error) { + return (error); + } + if (uaa->driver_info == NULL) { + /* some modems do not have any capabilities */ + return (error); + } + umodem_get_caps(uaa, &cm, &acm); + if (!(cm & USB_CDC_CM_DOES_CM) || + !(cm & USB_CDC_CM_OVER_DATA) || + !(acm & USB_CDC_ACM_HAS_LINE)) { + error = ENXIO; + } + return (error); +} + +static int +umodem_attach(device_t dev) +{ + struct usb2_attach_arg *uaa = device_get_ivars(dev); + struct umodem_softc *sc = device_get_softc(dev); + struct usb2_cdc_cm_descriptor *cmd; + uint8_t i; + int error; + + device_set_usb2_desc(dev); + + sc->sc_ctrl_iface_no = uaa->info.bIfaceNum; + sc->sc_iface_index[1] = uaa->info.bIfaceIndex; + sc->sc_udev = uaa->device; + + umodem_get_caps(uaa, &sc->sc_cm_cap, &sc->sc_acm_cap); + + /* get the data interface number */ + + cmd = umodem_get_desc(uaa, UDESC_CS_INTERFACE, UDESCSUB_CDC_CM); + + if ((cmd == NULL) || (cmd->bLength < sizeof(*cmd))) { + device_printf(dev, "no CM descriptor!\n"); + goto detach; + } + sc->sc_data_iface_no = cmd->bDataInterface; + + device_printf(dev, "data interface %d, has %sCM over " + "data, has %sbreak\n", + sc->sc_data_iface_no, + sc->sc_cm_cap & USB_CDC_CM_OVER_DATA ? "" : "no ", + sc->sc_acm_cap & USB_CDC_ACM_HAS_BREAK ? "" : "no "); + + /* get the data interface too */ + + for (i = 0;; i++) { + struct usb2_interface *iface; + struct usb2_interface_descriptor *id; + + iface = usb2_get_iface(uaa->device, i); + + if (iface) { + + id = usb2_get_interface_descriptor(iface); + + if (id && (id->bInterfaceNumber == sc->sc_data_iface_no)) { + sc->sc_iface_index[0] = i; + usb2_set_parent_iface(uaa->device, i, uaa->info.bIfaceIndex); + break; + } + } else { + device_printf(dev, "no data interface!\n"); + goto detach; + } + } + + if (sc->sc_cm_cap & USB_CDC_CM_OVER_DATA) { + if (sc->sc_acm_cap & USB_CDC_ACM_HAS_FEATURE) { + + error = umodem_set_comm_feature + (uaa->device, sc->sc_ctrl_iface_no, + UCDC_ABSTRACT_STATE, UCDC_DATA_MULTIPLEXED); + + /* ignore any errors */ + } + sc->sc_cm_over_data = 1; + } + error = usb2_transfer_setup(uaa->device, + sc->sc_iface_index, sc->sc_xfer, + umodem_config, UMODEM_N_TRANSFER, + sc, &Giant); + if (error) { + goto detach; + } + + /* clear stall at first run */ + usb2_transfer_set_stall(sc->sc_xfer[UMODEM_BULK_WR]); + usb2_transfer_set_stall(sc->sc_xfer[UMODEM_BULK_RD]); + + error = usb2_com_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc, + &umodem_callback, &Giant); + if (error) { + goto detach; + } + return (0); + +detach: + umodem_detach(dev); + return (ENXIO); +} + +static void +umodem_start_read(struct usb2_com_softc *ucom) +{ + struct umodem_softc *sc = ucom->sc_parent; + + /* start interrupt endpoint, if any */ + usb2_transfer_start(sc->sc_xfer[UMODEM_INTR_RD]); + + /* start read endpoint */ + usb2_transfer_start(sc->sc_xfer[UMODEM_BULK_RD]); +} + +static void +umodem_stop_read(struct usb2_com_softc *ucom) +{ + struct umodem_softc *sc = ucom->sc_parent; + + /* stop interrupt endpoint, if any */ + usb2_transfer_stop(sc->sc_xfer[UMODEM_INTR_RD]); + + /* stop read endpoint */ + usb2_transfer_stop(sc->sc_xfer[UMODEM_BULK_RD]); +} + +static void +umodem_start_write(struct usb2_com_softc *ucom) +{ + struct umodem_softc *sc = ucom->sc_parent; + + usb2_transfer_start(sc->sc_xfer[UMODEM_BULK_WR]); +} + +static void +umodem_stop_write(struct usb2_com_softc *ucom) +{ + struct umodem_softc *sc = ucom->sc_parent; + + usb2_transfer_stop(sc->sc_xfer[UMODEM_BULK_WR]); +} + +static void +umodem_get_caps(struct usb2_attach_arg *uaa, uint8_t *cm, uint8_t *acm) +{ + struct usb2_cdc_cm_descriptor *cmd; + struct usb2_cdc_acm_descriptor *cad; + + *cm = *acm = 0; + + cmd = umodem_get_desc(uaa, UDESC_CS_INTERFACE, UDESCSUB_CDC_CM); + if ((cmd == NULL) || (cmd->bLength < sizeof(*cmd))) { + DPRINTF("no CM desc\n"); + return; + } + *cm = cmd->bmCapabilities; + + cad = umodem_get_desc(uaa, UDESC_CS_INTERFACE, UDESCSUB_CDC_ACM); + if ((cad == NULL) || (cad->bLength < sizeof(*cad))) { + DPRINTF("no ACM desc\n"); + return; + } + *acm = cad->bmCapabilities; +} + +static void +umodem_cfg_get_status(struct usb2_com_softc *ucom, uint8_t *lsr, uint8_t *msr) +{ + struct umodem_softc *sc = ucom->sc_parent; + + DPRINTF("\n"); + + *lsr = sc->sc_lsr; + *msr = sc->sc_msr; +} + +static int +umodem_pre_param(struct usb2_com_softc *ucom, struct termios *t) +{ + return (0); /* we accept anything */ +} + +static void +umodem_cfg_param(struct usb2_com_softc *ucom, struct termios *t) +{ + struct umodem_softc *sc = ucom->sc_parent; + struct usb2_cdc_line_state ls; + struct usb2_device_request req; + + DPRINTF("sc=%p\n", sc); + + bzero(&ls, sizeof(ls)); + + USETDW(ls.dwDTERate, t->c_ospeed); + + ls.bCharFormat = (t->c_cflag & CSTOPB) ? + UCDC_STOP_BIT_2 : UCDC_STOP_BIT_1; + + ls.bParityType = (t->c_cflag & PARENB) ? + ((t->c_cflag & PARODD) ? + UCDC_PARITY_ODD : UCDC_PARITY_EVEN) : UCDC_PARITY_NONE; + + switch (t->c_cflag & CSIZE) { + case CS5: + ls.bDataBits = 5; + break; + case CS6: + ls.bDataBits = 6; + break; + case CS7: + ls.bDataBits = 7; + break; + case CS8: + ls.bDataBits = 8; + break; + } + + DPRINTF("rate=%d fmt=%d parity=%d bits=%d\n", + UGETDW(ls.dwDTERate), ls.bCharFormat, + ls.bParityType, ls.bDataBits); + + req.bmRequestType = UT_WRITE_CLASS_INTERFACE; + req.bRequest = UCDC_SET_LINE_CODING; + USETW(req.wValue, 0); + req.wIndex[0] = sc->sc_ctrl_iface_no; + req.wIndex[1] = 0; + USETW(req.wLength, sizeof(ls)); + + usb2_com_cfg_do_request(sc->sc_udev, &sc->sc_ucom, + &req, &ls, 0, 1000); +} + +static int +umodem_ioctl(struct usb2_com_softc *ucom, uint32_t cmd, caddr_t data, + int flag, struct thread *td) +{ + struct umodem_softc *sc = ucom->sc_parent; + int error = 0; + + DPRINTF("cmd=0x%08x\n", cmd); + + switch (cmd) { + case USB_GET_CM_OVER_DATA: + *(int *)data = sc->sc_cm_over_data; + break; + + case USB_SET_CM_OVER_DATA: + if (*(int *)data != sc->sc_cm_over_data) { + /* XXX change it */ + } + break; + + default: + DPRINTF("unknown\n"); + error = ENOIOCTL; + break; + } + + return (error); +} + +static void +umodem_cfg_set_dtr(struct usb2_com_softc *ucom, uint8_t onoff) +{ + struct umodem_softc *sc = ucom->sc_parent; + struct usb2_device_request req; + + DPRINTF("onoff=%d\n", onoff); + + if (onoff) + sc->sc_line |= UCDC_LINE_DTR; + else + sc->sc_line &= ~UCDC_LINE_DTR; + + req.bmRequestType = UT_WRITE_CLASS_INTERFACE; + req.bRequest = UCDC_SET_CONTROL_LINE_STATE; + USETW(req.wValue, sc->sc_line); + req.wIndex[0] = sc->sc_ctrl_iface_no; + req.wIndex[1] = 0; + USETW(req.wLength, 0); + + usb2_com_cfg_do_request(sc->sc_udev, &sc->sc_ucom, + &req, NULL, 0, 1000); +} + +static void +umodem_cfg_set_rts(struct usb2_com_softc *ucom, uint8_t onoff) +{ + struct umodem_softc *sc = ucom->sc_parent; + struct usb2_device_request req; + + DPRINTF("onoff=%d\n", onoff); + + if (onoff) + sc->sc_line |= UCDC_LINE_RTS; + else + sc->sc_line &= ~UCDC_LINE_RTS; + + req.bmRequestType = UT_WRITE_CLASS_INTERFACE; + req.bRequest = UCDC_SET_CONTROL_LINE_STATE; + USETW(req.wValue, sc->sc_line); + req.wIndex[0] = sc->sc_ctrl_iface_no; + req.wIndex[1] = 0; + USETW(req.wLength, 0); + + usb2_com_cfg_do_request(sc->sc_udev, &sc->sc_ucom, + &req, NULL, 0, 1000); +} + +static void +umodem_cfg_set_break(struct usb2_com_softc *ucom, uint8_t onoff) +{ + struct umodem_softc *sc = ucom->sc_parent; + struct usb2_device_request req; + uint16_t temp; + + DPRINTF("onoff=%d\n", onoff); + + if (sc->sc_acm_cap & USB_CDC_ACM_HAS_BREAK) { + + temp = onoff ? UCDC_BREAK_ON : UCDC_BREAK_OFF; + + req.bmRequestType = UT_WRITE_CLASS_INTERFACE; + req.bRequest = UCDC_SEND_BREAK; + USETW(req.wValue, temp); + req.wIndex[0] = sc->sc_ctrl_iface_no; + req.wIndex[1] = 0; + USETW(req.wLength, 0); + + usb2_com_cfg_do_request(sc->sc_udev, &sc->sc_ucom, + &req, NULL, 0, 1000); + } +} + +static void +umodem_intr_callback(struct usb2_xfer *xfer) +{ + struct usb2_cdc_notification pkt; + struct umodem_softc *sc = xfer->priv_sc; + uint16_t wLen; + + switch (USB_GET_STATE(xfer)) { + case USB_ST_TRANSFERRED: + + if (xfer->actlen < 8) { + DPRINTF("received short packet, " + "%d bytes\n", xfer->actlen); + goto tr_setup; + } + if (xfer->actlen > sizeof(pkt)) { + DPRINTF("truncating message\n"); + xfer->actlen = sizeof(pkt); + } + usb2_copy_out(xfer->frbuffers, 0, &pkt, xfer->actlen); + + xfer->actlen -= 8; + + wLen = UGETW(pkt.wLength); + if (xfer->actlen > wLen) { + xfer->actlen = wLen; + } + if (pkt.bmRequestType != UCDC_NOTIFICATION) { + DPRINTF("unknown message type, " + "0x%02x, on notify pipe!\n", + pkt.bmRequestType); + goto tr_setup; + } + switch (pkt.bNotification) { + case UCDC_N_SERIAL_STATE: + /* + * Set the serial state in ucom driver based on + * the bits from the notify message + */ + if (xfer->actlen < 2) { + DPRINTF("invalid notification " + "length, %d bytes!\n", xfer->actlen); + break; + } + DPRINTF("notify bytes = %02x%02x\n", + pkt.data[0], + pkt.data[1]); + + /* Currently, lsr is always zero. */ + sc->sc_lsr = 0; + sc->sc_msr = 0; + + if (pkt.data[0] & UCDC_N_SERIAL_RI) { + sc->sc_msr |= SER_RI; + } + if (pkt.data[0] & UCDC_N_SERIAL_DSR) { + sc->sc_msr |= SER_DSR; + } + if (pkt.data[0] & UCDC_N_SERIAL_DCD) { + sc->sc_msr |= SER_DCD; + } + usb2_com_status_change(&sc->sc_ucom); + break; + + default: + DPRINTF("unknown notify message: 0x%02x\n", + pkt.bNotification); + break; + } + + case USB_ST_SETUP: +tr_setup: + xfer->frlengths[0] = xfer->max_data_length; + usb2_start_hardware(xfer); + return; + + default: /* Error */ + if (xfer->error != USB_ERR_CANCELLED) { + /* try to clear stall first */ + xfer->flags.stall_pipe = 1; + goto tr_setup; + } + return; + + } +} + +static void +umodem_write_callback(struct usb2_xfer *xfer) +{ + struct umodem_softc *sc = xfer->priv_sc; + uint32_t actlen; + + switch (USB_GET_STATE(xfer)) { + case USB_ST_SETUP: + case USB_ST_TRANSFERRED: +tr_setup: + if (usb2_com_get_data(&sc->sc_ucom, xfer->frbuffers, 0, + UMODEM_BUF_SIZE, &actlen)) { + + xfer->frlengths[0] = actlen; + usb2_start_hardware(xfer); + } + return; + + default: /* Error */ + if (xfer->error != USB_ERR_CANCELLED) { + /* try to clear stall first */ + xfer->flags.stall_pipe = 1; + goto tr_setup; + } + return; + } +} + +static void +umodem_read_callback(struct usb2_xfer *xfer) +{ + struct umodem_softc *sc = xfer->priv_sc; + + switch (USB_GET_STATE(xfer)) { + case USB_ST_TRANSFERRED: + + DPRINTF("actlen=%d\n", xfer->actlen); + + usb2_com_put_data(&sc->sc_ucom, xfer->frbuffers, 0, + xfer->actlen); + + case USB_ST_SETUP: +tr_setup: + xfer->frlengths[0] = xfer->max_data_length; + usb2_start_hardware(xfer); + return; + + default: /* Error */ + if (xfer->error != USB_ERR_CANCELLED) { + /* try to clear stall first */ + xfer->flags.stall_pipe = 1; + goto tr_setup; + } + return; + } +} + +static void * +umodem_get_desc(struct usb2_attach_arg *uaa, uint8_t type, uint8_t subtype) +{ + return (usb2_find_descriptor(uaa->device, NULL, uaa->info.bIfaceIndex, + type, 0 - 1, subtype, 0 - 1)); +} + +static usb2_error_t +umodem_set_comm_feature(struct usb2_device *udev, uint8_t iface_no, + uint16_t feature, uint16_t state) +{ + struct usb2_device_request req; + struct usb2_cdc_abstract_state ast; + + DPRINTF("feature=%d state=%d\n", + feature, state); + + req.bmRequestType = UT_WRITE_CLASS_INTERFACE; + req.bRequest = UCDC_SET_COMM_FEATURE; + USETW(req.wValue, feature); + req.wIndex[0] = iface_no; + req.wIndex[1] = 0; + USETW(req.wLength, UCDC_ABSTRACT_STATE_LENGTH); + USETW(ast.wState, state); + + return (usb2_do_request(udev, &Giant, &req, &ast)); +} + +static int +umodem_detach(device_t dev) +{ + struct umodem_softc *sc = device_get_softc(dev); + + DPRINTF("sc=%p\n", sc); + + usb2_com_detach(&sc->sc_super_ucom, &sc->sc_ucom, 1); + + usb2_transfer_unsetup(sc->sc_xfer, UMODEM_N_TRANSFER); + + return (0); +} |