diff options
Diffstat (limited to 'sys/dev/usb/ohci.c')
| -rw-r--r-- | sys/dev/usb/ohci.c | 3466 |
1 files changed, 3466 insertions, 0 deletions
diff --git a/sys/dev/usb/ohci.c b/sys/dev/usb/ohci.c new file mode 100644 index 0000000..cb44d42 --- /dev/null +++ b/sys/dev/usb/ohci.c @@ -0,0 +1,3466 @@ +/* $NetBSD: ohci.c,v 1.125 2002/05/28 12:42:38 augustss Exp $ */ +/* $FreeBSD$ */ + +/* Also, already ported: + * $NetBSD: ohci.c,v 1.127 2002/08/07 20:03:19 augustss Exp $ + */ + +/* + * Copyright (c) 1998 The NetBSD Foundation, Inc. + * All rights reserved. + * + * This code is derived from software contributed to The NetBSD Foundation + * by Lennart Augustsson (lennart@augustsson.net) at + * Carlstedt Research & Technology. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the NetBSD + * Foundation, Inc. and its contributors. + * 4. Neither the name of The NetBSD Foundation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * USB Open Host Controller driver. + * + * OHCI spec: http://www.compaq.com/productinfo/development/openhci.html + * USB spec: http://www.usb.org/developers/data/usbspec.zip + */ + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/malloc.h> +#if defined(__NetBSD__) || defined(__OpenBSD__) +#include <sys/kernel.h> +#include <sys/device.h> +#include <sys/select.h> +#elif defined(__FreeBSD__) +#include <sys/endian.h> +#include <sys/module.h> +#include <sys/bus.h> +#include <machine/bus_pio.h> +#include <machine/bus_memio.h> +#if defined(DIAGNOSTIC) && defined(__i386__) && defined(__FreeBSD__) +#include <machine/cpu.h> +#endif +#endif +#include <sys/proc.h> +#include <sys/queue.h> +#include <sys/sysctl.h> + +#include <machine/bus.h> +#include <machine/endian.h> + +#include <dev/usb/usb.h> +#include <dev/usb/usbdi.h> +#include <dev/usb/usbdivar.h> +#include <dev/usb/usb_mem.h> +#include <dev/usb/usb_quirks.h> + +#include <dev/usb/ohcireg.h> +#include <dev/usb/ohcivar.h> + +#if defined(__FreeBSD__) +#include <machine/clock.h> + +#define delay(d) DELAY(d) +#endif + +#if defined(__OpenBSD__) +struct cfdriver ohci_cd = { + NULL, "ohci", DV_DULL +}; +#endif + +#ifdef USB_DEBUG +#define DPRINTF(x) if (ohcidebug) logprintf x +#define DPRINTFN(n,x) if (ohcidebug>(n)) logprintf x +int ohcidebug = 0; +SYSCTL_NODE(_hw_usb, OID_AUTO, ohci, CTLFLAG_RW, 0, "USB ohci"); +SYSCTL_INT(_hw_usb_ohci, OID_AUTO, debug, CTLFLAG_RW, + &ohcidebug, 0, "ohci debug level"); +#ifndef __NetBSD__ +#define bitmask_snprintf(q,f,b,l) snprintf((b), (l), "%b", (q), (f)) +#endif +#else +#define DPRINTF(x) +#define DPRINTFN(n,x) +#endif + +/* + * The OHCI controller is little endian, so on big endian machines + * the data strored in memory needs to be swapped. + */ +#if defined(__OpenBSD__) +#if BYTE_ORDER == BIG_ENDIAN +#define htole32(x) (bswap32(x)) +#define le32toh(x) (bswap32(x)) +#else +#define htole32(x) (x) +#define le32toh(x) (x) +#endif +#endif + +struct ohci_pipe; + +Static ohci_soft_ed_t *ohci_alloc_sed(ohci_softc_t *); +Static void ohci_free_sed(ohci_softc_t *, ohci_soft_ed_t *); + +Static ohci_soft_td_t *ohci_alloc_std(ohci_softc_t *); +Static void ohci_free_std(ohci_softc_t *, ohci_soft_td_t *); + +Static ohci_soft_itd_t *ohci_alloc_sitd(ohci_softc_t *); +Static void ohci_free_sitd(ohci_softc_t *,ohci_soft_itd_t *); + +#if 0 +Static void ohci_free_std_chain(ohci_softc_t *, ohci_soft_td_t *, + ohci_soft_td_t *); +#endif +Static usbd_status ohci_alloc_std_chain(struct ohci_pipe *, + ohci_softc_t *, int, int, usbd_xfer_handle, + ohci_soft_td_t *, ohci_soft_td_t **); + +#if defined(__NetBSD__) || defined(__OpenBSD__) +Static void ohci_shutdown(void *v); +Static void ohci_power(int, void *); +#endif +Static usbd_status ohci_open(usbd_pipe_handle); +Static void ohci_poll(struct usbd_bus *); +Static void ohci_softintr(void *); +Static void ohci_waitintr(ohci_softc_t *, usbd_xfer_handle); +Static void ohci_add_done(ohci_softc_t *, ohci_physaddr_t); +Static void ohci_rhsc(ohci_softc_t *, usbd_xfer_handle); + +Static usbd_status ohci_device_request(usbd_xfer_handle xfer); +Static void ohci_add_ed(ohci_soft_ed_t *, ohci_soft_ed_t *); +Static void ohci_rem_ed(ohci_soft_ed_t *, ohci_soft_ed_t *); +Static void ohci_hash_add_td(ohci_softc_t *, ohci_soft_td_t *); +Static void ohci_hash_rem_td(ohci_softc_t *, ohci_soft_td_t *); +Static ohci_soft_td_t *ohci_hash_find_td(ohci_softc_t *, ohci_physaddr_t); +Static void ohci_hash_add_itd(ohci_softc_t *, ohci_soft_itd_t *); +Static void ohci_hash_rem_itd(ohci_softc_t *, ohci_soft_itd_t *); +Static ohci_soft_itd_t *ohci_hash_find_itd(ohci_softc_t *, ohci_physaddr_t); + +Static usbd_status ohci_setup_isoc(usbd_pipe_handle pipe); +Static void ohci_device_isoc_enter(usbd_xfer_handle); + +Static usbd_status ohci_allocm(struct usbd_bus *, usb_dma_t *, u_int32_t); +Static void ohci_freem(struct usbd_bus *, usb_dma_t *); + +Static usbd_xfer_handle ohci_allocx(struct usbd_bus *); +Static void ohci_freex(struct usbd_bus *, usbd_xfer_handle); + +Static usbd_status ohci_root_ctrl_transfer(usbd_xfer_handle); +Static usbd_status ohci_root_ctrl_start(usbd_xfer_handle); +Static void ohci_root_ctrl_abort(usbd_xfer_handle); +Static void ohci_root_ctrl_close(usbd_pipe_handle); +Static void ohci_root_ctrl_done(usbd_xfer_handle); + +Static usbd_status ohci_root_intr_transfer(usbd_xfer_handle); +Static usbd_status ohci_root_intr_start(usbd_xfer_handle); +Static void ohci_root_intr_abort(usbd_xfer_handle); +Static void ohci_root_intr_close(usbd_pipe_handle); +Static void ohci_root_intr_done(usbd_xfer_handle); + +Static usbd_status ohci_device_ctrl_transfer(usbd_xfer_handle); +Static usbd_status ohci_device_ctrl_start(usbd_xfer_handle); +Static void ohci_device_ctrl_abort(usbd_xfer_handle); +Static void ohci_device_ctrl_close(usbd_pipe_handle); +Static void ohci_device_ctrl_done(usbd_xfer_handle); + +Static usbd_status ohci_device_bulk_transfer(usbd_xfer_handle); +Static usbd_status ohci_device_bulk_start(usbd_xfer_handle); +Static void ohci_device_bulk_abort(usbd_xfer_handle); +Static void ohci_device_bulk_close(usbd_pipe_handle); +Static void ohci_device_bulk_done(usbd_xfer_handle); + +Static usbd_status ohci_device_intr_transfer(usbd_xfer_handle); +Static usbd_status ohci_device_intr_start(usbd_xfer_handle); +Static void ohci_device_intr_abort(usbd_xfer_handle); +Static void ohci_device_intr_close(usbd_pipe_handle); +Static void ohci_device_intr_done(usbd_xfer_handle); + +Static usbd_status ohci_device_isoc_transfer(usbd_xfer_handle); +Static usbd_status ohci_device_isoc_start(usbd_xfer_handle); +Static void ohci_device_isoc_abort(usbd_xfer_handle); +Static void ohci_device_isoc_close(usbd_pipe_handle); +Static void ohci_device_isoc_done(usbd_xfer_handle); + +Static usbd_status ohci_device_setintr(ohci_softc_t *sc, + struct ohci_pipe *pipe, int ival); + +Static int ohci_str(usb_string_descriptor_t *, int, const char *); + +Static void ohci_timeout(void *); +Static void ohci_timeout_task(void *); +Static void ohci_rhsc_able(ohci_softc_t *, int); +Static void ohci_rhsc_enable(void *); + +Static void ohci_close_pipe(usbd_pipe_handle, ohci_soft_ed_t *); +Static void ohci_abort_xfer(usbd_xfer_handle, usbd_status); + +Static void ohci_device_clear_toggle(usbd_pipe_handle pipe); +Static void ohci_noop(usbd_pipe_handle pipe); + +#ifdef USB_DEBUG +Static void ohci_dumpregs(ohci_softc_t *); +Static void ohci_dump_tds(ohci_soft_td_t *); +Static void ohci_dump_td(ohci_soft_td_t *); +Static void ohci_dump_ed(ohci_soft_ed_t *); +Static void ohci_dump_itd(ohci_soft_itd_t *); +Static void ohci_dump_itds(ohci_soft_itd_t *); +#endif + +#define OBARR(sc) bus_space_barrier((sc)->iot, (sc)->ioh, 0, (sc)->sc_size, \ + BUS_SPACE_BARRIER_READ|BUS_SPACE_BARRIER_WRITE) +#define OWRITE1(sc, r, x) \ + do { OBARR(sc); bus_space_write_1((sc)->iot, (sc)->ioh, (r), (x)); } while (0) +#define OWRITE2(sc, r, x) \ + do { OBARR(sc); bus_space_write_2((sc)->iot, (sc)->ioh, (r), (x)); } while (0) +#define OWRITE4(sc, r, x) \ + do { OBARR(sc); bus_space_write_4((sc)->iot, (sc)->ioh, (r), (x)); } while (0) +#define OREAD1(sc, r) (OBARR(sc), bus_space_read_1((sc)->iot, (sc)->ioh, (r))) +#define OREAD2(sc, r) (OBARR(sc), bus_space_read_2((sc)->iot, (sc)->ioh, (r))) +#define OREAD4(sc, r) (OBARR(sc), bus_space_read_4((sc)->iot, (sc)->ioh, (r))) + +/* Reverse the bits in a value 0 .. 31 */ +Static u_int8_t revbits[OHCI_NO_INTRS] = + { 0x00, 0x10, 0x08, 0x18, 0x04, 0x14, 0x0c, 0x1c, + 0x02, 0x12, 0x0a, 0x1a, 0x06, 0x16, 0x0e, 0x1e, + 0x01, 0x11, 0x09, 0x19, 0x05, 0x15, 0x0d, 0x1d, + 0x03, 0x13, 0x0b, 0x1b, 0x07, 0x17, 0x0f, 0x1f }; + +struct ohci_pipe { + struct usbd_pipe pipe; + ohci_soft_ed_t *sed; + union { + ohci_soft_td_t *td; + ohci_soft_itd_t *itd; + } tail; + /* Info needed for different pipe kinds. */ + union { + /* Control pipe */ + struct { + usb_dma_t reqdma; + u_int length; + ohci_soft_td_t *setup, *data, *stat; + } ctl; + /* Interrupt pipe */ + struct { + int nslots; + int pos; + } intr; + /* Bulk pipe */ + struct { + u_int length; + int isread; + } bulk; + /* Iso pipe */ + struct iso { + int next, inuse; + } iso; + } u; +}; + +#define OHCI_INTR_ENDPT 1 + +Static struct usbd_bus_methods ohci_bus_methods = { + ohci_open, + ohci_softintr, + ohci_poll, + ohci_allocm, + ohci_freem, + ohci_allocx, + ohci_freex, +}; + +Static struct usbd_pipe_methods ohci_root_ctrl_methods = { + ohci_root_ctrl_transfer, + ohci_root_ctrl_start, + ohci_root_ctrl_abort, + ohci_root_ctrl_close, + ohci_noop, + ohci_root_ctrl_done, +}; + +Static struct usbd_pipe_methods ohci_root_intr_methods = { + ohci_root_intr_transfer, + ohci_root_intr_start, + ohci_root_intr_abort, + ohci_root_intr_close, + ohci_noop, + ohci_root_intr_done, +}; + +Static struct usbd_pipe_methods ohci_device_ctrl_methods = { + ohci_device_ctrl_transfer, + ohci_device_ctrl_start, + ohci_device_ctrl_abort, + ohci_device_ctrl_close, + ohci_noop, + ohci_device_ctrl_done, +}; + +Static struct usbd_pipe_methods ohci_device_intr_methods = { + ohci_device_intr_transfer, + ohci_device_intr_start, + ohci_device_intr_abort, + ohci_device_intr_close, + ohci_device_clear_toggle, + ohci_device_intr_done, +}; + +Static struct usbd_pipe_methods ohci_device_bulk_methods = { + ohci_device_bulk_transfer, + ohci_device_bulk_start, + ohci_device_bulk_abort, + ohci_device_bulk_close, + ohci_device_clear_toggle, + ohci_device_bulk_done, +}; + +Static struct usbd_pipe_methods ohci_device_isoc_methods = { + ohci_device_isoc_transfer, + ohci_device_isoc_start, + ohci_device_isoc_abort, + ohci_device_isoc_close, + ohci_noop, + ohci_device_isoc_done, +}; + +#if defined(__NetBSD__) || defined(__OpenBSD__) +int +ohci_activate(device_ptr_t self, enum devact act) +{ + struct ohci_softc *sc = (struct ohci_softc *)self; + int rv = 0; + + switch (act) { + case DVACT_ACTIVATE: + return (EOPNOTSUPP); + break; + + case DVACT_DEACTIVATE: + if (sc->sc_child != NULL) + rv = config_deactivate(sc->sc_child); + sc->sc_dying = 1; + break; + } + return (rv); +} + +int +ohci_detach(struct ohci_softc *sc, int flags) +{ + int rv = 0; + + if (sc->sc_child != NULL) + rv = config_detach(sc->sc_child, flags); + + if (rv != 0) + return (rv); + + usb_uncallout(sc->sc_tmo_rhsc, ohci_rhsc_enable, sc); + +#if defined(__NetBSD__) || defined(__OpenBSD__) + powerhook_disestablish(sc->sc_powerhook); + shutdownhook_disestablish(sc->sc_shutdownhook); +#endif + + usb_delay_ms(&sc->sc_bus, 300); /* XXX let stray task complete */ + + /* free data structures XXX */ + + return (rv); +} +#endif + +ohci_soft_ed_t * +ohci_alloc_sed(ohci_softc_t *sc) +{ + ohci_soft_ed_t *sed; + usbd_status err; + int i, offs; + usb_dma_t dma; + + if (sc->sc_freeeds == NULL) { + DPRINTFN(2, ("ohci_alloc_sed: allocating chunk\n")); + err = usb_allocmem(&sc->sc_bus, OHCI_SED_SIZE * OHCI_SED_CHUNK, + OHCI_ED_ALIGN, &dma); + if (err) + return (NULL); + for(i = 0; i < OHCI_SED_CHUNK; i++) { + offs = i * OHCI_SED_SIZE; + sed = KERNADDR(&dma, offs); + sed->physaddr = DMAADDR(&dma, offs); + sed->next = sc->sc_freeeds; + sc->sc_freeeds = sed; + } + } + sed = sc->sc_freeeds; + sc->sc_freeeds = sed->next; + memset(&sed->ed, 0, sizeof(ohci_ed_t)); + sed->next = 0; + return (sed); +} + +void +ohci_free_sed(ohci_softc_t *sc, ohci_soft_ed_t *sed) +{ + sed->next = sc->sc_freeeds; + sc->sc_freeeds = sed; +} + +ohci_soft_td_t * +ohci_alloc_std(ohci_softc_t *sc) +{ + ohci_soft_td_t *std; + usbd_status err; + int i, offs; + usb_dma_t dma; + int s; + + if (sc->sc_freetds == NULL) { + DPRINTFN(2, ("ohci_alloc_std: allocating chunk\n")); + err = usb_allocmem(&sc->sc_bus, OHCI_STD_SIZE * OHCI_STD_CHUNK, + OHCI_TD_ALIGN, &dma); + if (err) + return (NULL); + s = splusb(); + for(i = 0; i < OHCI_STD_CHUNK; i++) { + offs = i * OHCI_STD_SIZE; + std = KERNADDR(&dma, offs); + std->physaddr = DMAADDR(&dma, offs); + std->nexttd = sc->sc_freetds; + sc->sc_freetds = std; + } + splx(s); + } + + s = splusb(); + std = sc->sc_freetds; + sc->sc_freetds = std->nexttd; + memset(&std->td, 0, sizeof(ohci_td_t)); + std->nexttd = NULL; + std->xfer = NULL; + ohci_hash_add_td(sc, std); + splx(s); + + return (std); +} + +void +ohci_free_std(ohci_softc_t *sc, ohci_soft_td_t *std) +{ + int s; + + s = splusb(); + ohci_hash_rem_td(sc, std); + std->nexttd = sc->sc_freetds; + sc->sc_freetds = std; + splx(s); +} + +usbd_status +ohci_alloc_std_chain(struct ohci_pipe *opipe, ohci_softc_t *sc, + int alen, int rd, usbd_xfer_handle xfer, + ohci_soft_td_t *sp, ohci_soft_td_t **ep) +{ + ohci_soft_td_t *next, *cur; + ohci_physaddr_t dataphys, dataphysend; + u_int32_t intr, tdflags; + int offset = 0; + int len, curlen; + usb_dma_t *dma = &xfer->dmabuf; + u_int16_t flags = xfer->flags; + + DPRINTFN(alen < 4096,("ohci_alloc_std_chain: start len=%d\n", alen)); + + len = alen; + cur = sp; + + dataphys = DMAADDR(dma, 0); + dataphysend = OHCI_PAGE(DMAADDR(dma, len - 1)); + tdflags = htole32( + (rd ? OHCI_TD_IN : OHCI_TD_OUT) | + (flags & USBD_SHORT_XFER_OK ? OHCI_TD_R : 0) | + OHCI_TD_NOCC | OHCI_TD_TOGGLE_CARRY); + + for (;;) { + next = ohci_alloc_std(sc); + if (next == NULL) + goto nomem; + + dataphys = DMAADDR(dma, offset); + + /* The OHCI hardware can handle at most one page crossing. */ +#if defined(__NetBSD__) || defined(__OpenBSD__) + if (OHCI_PAGE(dataphys) == dataphysend || + OHCI_PAGE(dataphys) + OHCI_PAGE_SIZE == dataphysend) +#elif defined(__FreeBSD__) + /* XXX This is pretty broken: Because we do not allocate + * a contiguous buffer (contiguous in physical pages) we + * can only transfer one page in one go. + * So check whether the start and end of the buffer are on + * the same page. + */ + if (OHCI_PAGE(dataphys) == dataphysend) +#endif + { + /* we can handle it in this TD */ + curlen = len; + } else { + /* XXX The calculation below is wrong and could + * result in a packet that is not a multiple of the + * MaxPacketSize in the case where the buffer does not + * start on an appropriate address (like for example in + * the case of an mbuf cluster). You'll get an early + * short packet. + */ +#if defined(__NetBSD__) || defined(__OpenBSD__) + /* must use multiple TDs, fill as much as possible. */ + curlen = 2 * OHCI_PAGE_SIZE - + OHCI_PAGE_MASK(dataphys); + if (curlen > len) /* may have fit in one page */ + curlen = len; +#elif defined(__FreeBSD__) + /* See comment above (XXX) */ + curlen = OHCI_PAGE_SIZE - + OHCI_PAGE_MASK(dataphys); +#endif + } + DPRINTFN(4,("ohci_alloc_std_chain: dataphys=0x%08x " + "dataphysend=0x%08x len=%d curlen=%d\n", + dataphys, dataphysend, + len, curlen)); + len -= curlen; + + intr = len == 0 ? OHCI_TD_SET_DI(1) : OHCI_TD_NOINTR; + cur->td.td_flags = htole32(tdflags | intr); + cur->td.td_cbp = htole32(dataphys); + cur->nexttd = next; + cur->td.td_nexttd = htole32(next->physaddr); + cur->td.td_be = htole32(dataphys + curlen - 1); + cur->len = curlen; + cur->flags = OHCI_ADD_LEN; + DPRINTFN(10,("ohci_alloc_std_chain: cbp=0x%08x be=0x%08x\n", + dataphys, dataphys + curlen - 1)); + if (len == 0) + break; + if (len < 0) + panic("Length went negative: %d curlen %d dma %p offset %08x", len, curlen, *dma, (int)offset); + + DPRINTFN(10,("ohci_alloc_std_chain: extend chain\n")); + offset += curlen; + cur = next; + } + if ((flags & USBD_FORCE_SHORT_XFER) && + alen % UGETW(opipe->pipe.endpoint->edesc->wMaxPacketSize) == 0) { + /* Force a 0 length transfer at the end. */ + + cur->td.td_flags = htole32(tdflags | OHCI_TD_NOINTR); + cur = next; + + next = ohci_alloc_std(sc); + if (next == NULL) + goto nomem; + + cur->td.td_flags = htole32(tdflags | OHCI_TD_SET_DI(1)); + cur->td.td_cbp = 0; /* indicate 0 length packet */ + cur->nexttd = next; + cur->td.td_nexttd = htole32(next->physaddr); + cur->td.td_be = ~0; + cur->len = 0; + cur->flags = 0; + cur->xfer = xfer; + DPRINTFN(2,("ohci_alloc_std_chain: add 0 xfer\n")); + } + cur->flags = OHCI_CALL_DONE | OHCI_ADD_LEN; + *ep = next; + + return (USBD_NORMAL_COMPLETION); + + nomem: + /* XXX free chain */ + return (USBD_NOMEM); +} + +#if 0 +Static void +ohci_free_std_chain(ohci_softc_t *sc, ohci_soft_td_t *std, + ohci_soft_td_t *stdend) +{ + ohci_soft_td_t *p; + + for (; std != stdend; std = p) { + p = std->nexttd; + ohci_free_std(sc, std); + } +} +#endif + +ohci_soft_itd_t * +ohci_alloc_sitd(ohci_softc_t *sc) +{ + ohci_soft_itd_t *sitd; + usbd_status err; + int i, s, offs; + usb_dma_t dma; + + if (sc->sc_freeitds == NULL) { + DPRINTFN(2, ("ohci_alloc_sitd: allocating chunk\n")); + err = usb_allocmem(&sc->sc_bus, OHCI_SITD_SIZE * OHCI_SITD_CHUNK, + OHCI_ITD_ALIGN, &dma); + if (err) + return (NULL); + for(i = 0; i < OHCI_SITD_CHUNK; i++) { + offs = i * OHCI_SITD_SIZE; + sitd = KERNADDR(&dma, offs); + sitd->physaddr = DMAADDR(&dma, offs); + sitd->nextitd = sc->sc_freeitds; + sc->sc_freeitds = sitd; + } + } + + s = splusb(); + sitd = sc->sc_freeitds; + sc->sc_freeitds = sitd->nextitd; + memset(&sitd->itd, 0, sizeof(ohci_itd_t)); + sitd->nextitd = NULL; + sitd->xfer = NULL; + ohci_hash_add_itd(sc, sitd); + splx(s); + +#ifdef DIAGNOSTIC + sitd->isdone = 0; +#endif + + return (sitd); +} + +void +ohci_free_sitd(ohci_softc_t *sc, ohci_soft_itd_t *sitd) +{ + int s; + + DPRINTFN(10,("ohci_free_sitd: sitd=%p\n", sitd)); + +#ifdef DIAGNOSTIC + if (!sitd->isdone) { + panic("ohci_free_sitd: sitd=%p not done\n", sitd); + return; + } +#endif + + s = splusb(); + ohci_hash_rem_itd(sc, sitd); + sitd->nextitd = sc->sc_freeitds; + sc->sc_freeitds = sitd; + splx(s); +} + +usbd_status +ohci_init(ohci_softc_t *sc) +{ + ohci_soft_ed_t *sed, *psed; + usbd_status err; + int i; + u_int32_t s, ctl, ival, hcr, fm, per, rev, desca; + + DPRINTF(("ohci_init: start\n")); +#if defined(__OpenBSD__) + printf(","); +#else + printf("%s:", USBDEVNAME(sc->sc_bus.bdev)); +#endif + rev = OREAD4(sc, OHCI_REVISION); + printf(" OHCI version %d.%d%s\n", OHCI_REV_HI(rev), OHCI_REV_LO(rev), + OHCI_REV_LEGACY(rev) ? ", legacy support" : ""); + + if (OHCI_REV_HI(rev) != 1 || OHCI_REV_LO(rev) != 0) { + printf("%s: unsupported OHCI revision\n", + USBDEVNAME(sc->sc_bus.bdev)); + sc->sc_bus.usbrev = USBREV_UNKNOWN; + return (USBD_INVAL); + } + sc->sc_bus.usbrev = USBREV_1_0; + + for (i = 0; i < OHCI_HASH_SIZE; i++) + LIST_INIT(&sc->sc_hash_itds[i]); + + SIMPLEQ_INIT(&sc->sc_free_xfers); + + /* XXX determine alignment by R/W */ + /* Allocate the HCCA area. */ + err = usb_allocmem(&sc->sc_bus, OHCI_HCCA_SIZE, + OHCI_HCCA_ALIGN, &sc->sc_hccadma); + if (err) + return (err); + sc->sc_hcca = KERNADDR(&sc->sc_hccadma, 0); + memset(sc->sc_hcca, 0, OHCI_HCCA_SIZE); + + sc->sc_eintrs = OHCI_NORMAL_INTRS; + + /* Allocate dummy ED that starts the control list. */ + sc->sc_ctrl_head = ohci_alloc_sed(sc); + if (sc->sc_ctrl_head == NULL) { + err = USBD_NOMEM; + goto bad1; + } + sc->sc_ctrl_head->ed.ed_flags |= htole32(OHCI_ED_SKIP); + + /* Allocate dummy ED that starts the bulk list. */ + sc->sc_bulk_head = ohci_alloc_sed(sc); + if (sc->sc_bulk_head == NULL) { + err = USBD_NOMEM; + goto bad2; + } + sc->sc_bulk_head->ed.ed_flags |= htole32(OHCI_ED_SKIP); + + /* Allocate dummy ED that starts the isochronous list. */ + sc->sc_isoc_head = ohci_alloc_sed(sc); + if (sc->sc_isoc_head == NULL) { + err = USBD_NOMEM; + goto bad3; + } + sc->sc_isoc_head->ed.ed_flags |= htole32(OHCI_ED_SKIP); + + /* Allocate all the dummy EDs that make up the interrupt tree. */ + for (i = 0; i < OHCI_NO_EDS; i++) { + sed = ohci_alloc_sed(sc); + if (sed == NULL) { + while (--i >= 0) + ohci_free_sed(sc, sc->sc_eds[i]); + err = USBD_NOMEM; + goto bad4; + } + /* All ED fields are set to 0. */ + sc->sc_eds[i] = sed; + sed->ed.ed_flags |= htole32(OHCI_ED_SKIP); + if (i != 0) + psed = sc->sc_eds[(i-1) / 2]; + else + psed= sc->sc_isoc_head; + sed->next = psed; + sed->ed.ed_nexted = htole32(psed->physaddr); + } + /* + * Fill HCCA interrupt table. The bit reversal is to get + * the tree set up properly to spread the interrupts. + */ + for (i = 0; i < OHCI_NO_INTRS; i++) + sc->sc_hcca->hcca_interrupt_table[revbits[i]] = + htole32(sc->sc_eds[OHCI_NO_EDS-OHCI_NO_INTRS+i]->physaddr); + +#ifdef USB_DEBUG + if (ohcidebug > 15) { + for (i = 0; i < OHCI_NO_EDS; i++) { + printf("ed#%d ", i); + ohci_dump_ed(sc->sc_eds[i]); + } + printf("iso "); + ohci_dump_ed(sc->sc_isoc_head); + } +#endif + + /* Determine in what context we are running. */ + ctl = OREAD4(sc, OHCI_CONTROL); + if (ctl & OHCI_IR) { + /* SMM active, request change */ + DPRINTF(("ohci_init: SMM active, request owner change\n")); + s = OREAD4(sc, OHCI_COMMAND_STATUS); + OWRITE4(sc, OHCI_COMMAND_STATUS, s | OHCI_OCR); + for (i = 0; i < 100 && (ctl & OHCI_IR); i++) { + usb_delay_ms(&sc->sc_bus, 1); + ctl = OREAD4(sc, OHCI_CONTROL); + } + if ((ctl & OHCI_IR) == 0) { + printf("%s: SMM does not respond, resetting\n", + USBDEVNAME(sc->sc_bus.bdev)); + OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); + goto reset; + } +#if 0 +/* Don't bother trying to reuse the BIOS init, we'll reset it anyway. */ + } else if ((ctl & OHCI_HCFS_MASK) != OHCI_HCFS_RESET) { + /* BIOS started controller. */ + DPRINTF(("ohci_init: BIOS active\n")); + if ((ctl & OHCI_HCFS_MASK) != OHCI_HCFS_OPERATIONAL) { + OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_OPERATIONAL); + usb_delay_ms(&sc->sc_bus, USB_RESUME_DELAY); + } +#endif + } else { + DPRINTF(("ohci_init: cold started\n")); + reset: + /* Controller was cold started. */ + usb_delay_ms(&sc->sc_bus, USB_BUS_RESET_DELAY); + } + + /* + * This reset should not be necessary according to the OHCI spec, but + * without it some controllers do not start. + */ + DPRINTF(("%s: resetting\n", USBDEVNAME(sc->sc_bus.bdev))); + OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); + usb_delay_ms(&sc->sc_bus, USB_BUS_RESET_DELAY); + + /* We now own the host controller and the bus has been reset. */ + ival = OHCI_GET_IVAL(OREAD4(sc, OHCI_FM_INTERVAL)); + + OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_HCR); /* Reset HC */ + /* Nominal time for a reset is 10 us. */ + for (i = 0; i < 10; i++) { + delay(10); + hcr = OREAD4(sc, OHCI_COMMAND_STATUS) & OHCI_HCR; + if (!hcr) + break; + } + if (hcr) { + printf("%s: reset timeout\n", USBDEVNAME(sc->sc_bus.bdev)); + err = USBD_IOERROR; + goto bad5; + } +#ifdef USB_DEBUG + if (ohcidebug > 15) + ohci_dumpregs(sc); +#endif + + /* The controller is now in SUSPEND state, we have 2ms to finish. */ + + /* Set up HC registers. */ + OWRITE4(sc, OHCI_HCCA, DMAADDR(&sc->sc_hccadma, 0)); + OWRITE4(sc, OHCI_CONTROL_HEAD_ED, sc->sc_ctrl_head->physaddr); + OWRITE4(sc, OHCI_BULK_HEAD_ED, sc->sc_bulk_head->physaddr); + /* disable all interrupts and then switch on all desired interrupts */ + OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_ALL_INTRS); + OWRITE4(sc, OHCI_INTERRUPT_ENABLE, sc->sc_eintrs | OHCI_MIE); + /* switch on desired functional features */ + ctl = OREAD4(sc, OHCI_CONTROL); + ctl &= ~(OHCI_CBSR_MASK | OHCI_LES | OHCI_HCFS_MASK | OHCI_IR); + ctl |= OHCI_PLE | OHCI_IE | OHCI_CLE | OHCI_BLE | + OHCI_RATIO_1_4 | OHCI_HCFS_OPERATIONAL; + /* And finally start it! */ + OWRITE4(sc, OHCI_CONTROL, ctl); + + /* + * The controller is now OPERATIONAL. Set a some final + * registers that should be set earlier, but that the + * controller ignores when in the SUSPEND state. + */ + fm = (OREAD4(sc, OHCI_FM_INTERVAL) & OHCI_FIT) ^ OHCI_FIT; + fm |= OHCI_FSMPS(ival) | ival; + OWRITE4(sc, OHCI_FM_INTERVAL, fm); + per = OHCI_PERIODIC(ival); /* 90% periodic */ + OWRITE4(sc, OHCI_PERIODIC_START, per); + + /* Fiddle the No OverCurrent Protection bit to avoid chip bug. */ + desca = OREAD4(sc, OHCI_RH_DESCRIPTOR_A); + OWRITE4(sc, OHCI_RH_DESCRIPTOR_A, desca | OHCI_NOCP); + OWRITE4(sc, OHCI_RH_STATUS, OHCI_LPSC); /* Enable port power */ + usb_delay_ms(&sc->sc_bus, OHCI_ENABLE_POWER_DELAY); + OWRITE4(sc, OHCI_RH_DESCRIPTOR_A, desca); + + /* + * The AMD756 requires a delay before re-reading the register, + * otherwise it will occasionally report 0 ports. + */ + usb_delay_ms(&sc->sc_bus, OHCI_READ_DESC_DELAY); + sc->sc_noport = OHCI_GET_NDP(OREAD4(sc, OHCI_RH_DESCRIPTOR_A)); + +#ifdef USB_DEBUG + if (ohcidebug > 5) + ohci_dumpregs(sc); +#endif + + /* Set up the bus struct. */ + sc->sc_bus.methods = &ohci_bus_methods; + sc->sc_bus.pipe_size = sizeof(struct ohci_pipe); + +#if defined(__NetBSD__) || defined(__OpenBSD__) + sc->sc_control = sc->sc_intre = 0; + sc->sc_powerhook = powerhook_establish(ohci_power, sc); + sc->sc_shutdownhook = shutdownhook_establish(ohci_shutdown, sc); +#endif + + usb_callout_init(sc->sc_tmo_rhsc); + + return (USBD_NORMAL_COMPLETION); + + bad5: + for (i = 0; i < OHCI_NO_EDS; i++) + ohci_free_sed(sc, sc->sc_eds[i]); + bad4: + ohci_free_sed(sc, sc->sc_isoc_head); + bad3: + ohci_free_sed(sc, sc->sc_ctrl_head); + bad2: + ohci_free_sed(sc, sc->sc_bulk_head); + bad1: + usb_freemem(&sc->sc_bus, &sc->sc_hccadma); + return (err); +} + +usbd_status +ohci_allocm(struct usbd_bus *bus, usb_dma_t *dma, u_int32_t size) +{ +#if defined(__NetBSD__) || defined(__OpenBSD__) + struct ohci_softc *sc = (struct ohci_softc *)bus; +#endif + + return (usb_allocmem(&sc->sc_bus, size, 0, dma)); +} + +void +ohci_freem(struct usbd_bus *bus, usb_dma_t *dma) +{ +#if defined(__NetBSD__) || defined(__OpenBSD__) + struct ohci_softc *sc = (struct ohci_softc *)bus; +#endif + + usb_freemem(&sc->sc_bus, dma); +} + +usbd_xfer_handle +ohci_allocx(struct usbd_bus *bus) +{ + struct ohci_softc *sc = (struct ohci_softc *)bus; + usbd_xfer_handle xfer; + + xfer = SIMPLEQ_FIRST(&sc->sc_free_xfers); + if (xfer != NULL) { + SIMPLEQ_REMOVE_HEAD(&sc->sc_free_xfers, xfer, next); +#ifdef DIAGNOSTIC + if (xfer->busy_free != XFER_FREE) { + printf("ohci_allocx: xfer=%p not free, 0x%08x\n", xfer, + xfer->busy_free); + } +#endif + } else { + xfer = malloc(sizeof(struct ohci_xfer), M_USB, M_NOWAIT); + } + if (xfer != NULL) { + memset(xfer, 0, sizeof (struct ohci_xfer)); +#ifdef DIAGNOSTIC + xfer->busy_free = XFER_BUSY; +#endif + } + return (xfer); +} + +void +ohci_freex(struct usbd_bus *bus, usbd_xfer_handle xfer) +{ + struct ohci_softc *sc = (struct ohci_softc *)bus; + +#ifdef DIAGNOSTIC + if (xfer->busy_free != XFER_BUSY) { + printf("ohci_freex: xfer=%p not busy, 0x%08x\n", xfer, + xfer->busy_free); + return; + } + xfer->busy_free = XFER_FREE; +#endif + SIMPLEQ_INSERT_HEAD(&sc->sc_free_xfers, xfer, next); +} + +/* + * Shut down the controller when the system is going down. + */ +#if defined(__NetBSD__) || defined(__OpenBSD__) +void +ohci_shutdown(void *v) +{ + ohci_softc_t *sc = v; + + DPRINTF(("ohci_shutdown: stopping the HC\n")); + OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); +} + +/* + * Handle suspend/resume. + * + * We need to switch to polling mode here, because this routine is + * called from an intterupt context. This is all right since we + * are almost suspended anyway. + */ +void +ohci_power(int why, void *v) +{ + ohci_softc_t *sc = v; + u_int32_t ctl; + int s; + +#ifdef USB_DEBUG + DPRINTF(("ohci_power: sc=%p, why=%d\n", sc, why)); + ohci_dumpregs(sc); +#endif + + s = splhardusb(); + switch (why) { + case PWR_SUSPEND: + case PWR_STANDBY: + sc->sc_bus.use_polling++; + ctl = OREAD4(sc, OHCI_CONTROL) & ~OHCI_HCFS_MASK; + if (sc->sc_control == 0) { + /* + * Preserve register values, in case that APM BIOS + * does not recover them. + */ + sc->sc_control = ctl; + sc->sc_intre = OREAD4(sc, OHCI_INTERRUPT_ENABLE); + } + ctl |= OHCI_HCFS_SUSPEND; + OWRITE4(sc, OHCI_CONTROL, ctl); + usb_delay_ms(&sc->sc_bus, USB_RESUME_WAIT); + sc->sc_bus.use_polling--; + break; + case PWR_RESUME: + sc->sc_bus.use_polling++; + /* Some broken BIOSes do not recover these values */ + OWRITE4(sc, OHCI_HCCA, DMAADDR(&sc->sc_hccadma, 0)); + OWRITE4(sc, OHCI_CONTROL_HEAD_ED, sc->sc_ctrl_head->physaddr); + OWRITE4(sc, OHCI_BULK_HEAD_ED, sc->sc_bulk_head->physaddr); + if (sc->sc_intre) + OWRITE4(sc, OHCI_INTERRUPT_ENABLE, + sc->sc_intre & (OHCI_ALL_INTRS | OHCI_MIE)); + if (sc->sc_control) + ctl = sc->sc_control; + else + ctl = OREAD4(sc, OHCI_CONTROL); + ctl |= OHCI_HCFS_RESUME; + OWRITE4(sc, OHCI_CONTROL, ctl); + usb_delay_ms(&sc->sc_bus, USB_RESUME_DELAY); + ctl = (ctl & ~OHCI_HCFS_MASK) | OHCI_HCFS_OPERATIONAL; + OWRITE4(sc, OHCI_CONTROL, ctl); + usb_delay_ms(&sc->sc_bus, USB_RESUME_RECOVERY); + sc->sc_control = sc->sc_intre = 0; + sc->sc_bus.use_polling--; + break; + case PWR_SOFTSUSPEND: + case PWR_SOFTSTANDBY: + case PWR_SOFTRESUME: + break; + } + splx(s); +} +#endif + +#ifdef USB_DEBUG +void +ohci_dumpregs(ohci_softc_t *sc) +{ + DPRINTF(("ohci_dumpregs: rev=0x%08x control=0x%08x command=0x%08x\n", + OREAD4(sc, OHCI_REVISION), + OREAD4(sc, OHCI_CONTROL), + OREAD4(sc, OHCI_COMMAND_STATUS))); + DPRINTF((" intrstat=0x%08x intre=0x%08x intrd=0x%08x\n", + OREAD4(sc, OHCI_INTERRUPT_STATUS), + OREAD4(sc, OHCI_INTERRUPT_ENABLE), + OREAD4(sc, OHCI_INTERRUPT_DISABLE))); + DPRINTF((" hcca=0x%08x percur=0x%08x ctrlhd=0x%08x\n", + OREAD4(sc, OHCI_HCCA), + OREAD4(sc, OHCI_PERIOD_CURRENT_ED), + OREAD4(sc, OHCI_CONTROL_HEAD_ED))); + DPRINTF((" ctrlcur=0x%08x bulkhd=0x%08x bulkcur=0x%08x\n", + OREAD4(sc, OHCI_CONTROL_CURRENT_ED), + OREAD4(sc, OHCI_BULK_HEAD_ED), + OREAD4(sc, OHCI_BULK_CURRENT_ED))); + DPRINTF((" done=0x%08x fmival=0x%08x fmrem=0x%08x\n", + OREAD4(sc, OHCI_DONE_HEAD), + OREAD4(sc, OHCI_FM_INTERVAL), + OREAD4(sc, OHCI_FM_REMAINING))); + DPRINTF((" fmnum=0x%08x perst=0x%08x lsthrs=0x%08x\n", + OREAD4(sc, OHCI_FM_NUMBER), + OREAD4(sc, OHCI_PERIODIC_START), + OREAD4(sc, OHCI_LS_THRESHOLD))); + DPRINTF((" desca=0x%08x descb=0x%08x stat=0x%08x\n", + OREAD4(sc, OHCI_RH_DESCRIPTOR_A), + OREAD4(sc, OHCI_RH_DESCRIPTOR_B), + OREAD4(sc, OHCI_RH_STATUS))); + DPRINTF((" port1=0x%08x port2=0x%08x\n", + OREAD4(sc, OHCI_RH_PORT_STATUS(1)), + OREAD4(sc, OHCI_RH_PORT_STATUS(2)))); + DPRINTF((" HCCA: frame_number=0x%04x done_head=0x%08x\n", + le32toh(sc->sc_hcca->hcca_frame_number), + le32toh(sc->sc_hcca->hcca_done_head))); +} +#endif + +Static int ohci_intr1(ohci_softc_t *); + +int +ohci_intr(void *p) +{ + ohci_softc_t *sc = p; + + if (sc == NULL || sc->sc_dying) + return (0); + + /* If we get an interrupt while polling, then just ignore it. */ + if (sc->sc_bus.use_polling) { +#ifdef DIAGNOSTIC + printf("ohci_intr: ignored interrupt while polling\n"); +#endif + return (0); + } + + return (ohci_intr1(sc)); +} + +Static int +ohci_intr1(ohci_softc_t *sc) +{ + u_int32_t intrs, eintrs; + ohci_physaddr_t done; + + DPRINTFN(14,("ohci_intr1: enter\n")); + + /* In case the interrupt occurs before initialization has completed. */ + if (sc == NULL || sc->sc_hcca == NULL) { +#ifdef DIAGNOSTIC + printf("ohci_intr: sc->sc_hcca == NULL\n"); +#endif + return (0); + } + + intrs = 0; + done = le32toh(sc->sc_hcca->hcca_done_head); + + /* The LSb of done is used to inform the HC Driver that an interrupt + * condition exists for both the Done list and for another event + * recorded in HcInterruptStatus. On an interrupt from the HC, the HC + * Driver checks the HccaDoneHead Value. If this value is 0, then the + * interrupt was caused by other than the HccaDoneHead update and the + * HcInterruptStatus register needs to be accessed to determine that + * exact interrupt cause. If HccaDoneHead is nonzero, then a Done list + * update interrupt is indicated and if the LSb of done is nonzero, + * then an additional interrupt event is indicated and + * HcInterruptStatus should be checked to determine its cause. + */ + if (done != 0) { + if (done & ~OHCI_DONE_INTRS) + intrs = OHCI_WDH; + if (done & OHCI_DONE_INTRS) { + intrs |= OREAD4(sc, OHCI_INTERRUPT_STATUS); + done &= ~OHCI_DONE_INTRS; + } + sc->sc_hcca->hcca_done_head = 0; + } else + intrs = OREAD4(sc, OHCI_INTERRUPT_STATUS); + + if (intrs == 0) /* nothing to be done (PCI shared interrupt) */ + return (0); + + intrs &= ~OHCI_MIE; + OWRITE4(sc, OHCI_INTERRUPT_STATUS, intrs); /* Acknowledge */ + eintrs = intrs & sc->sc_eintrs; + if (!eintrs) + return (0); + + sc->sc_bus.intr_context++; + sc->sc_bus.no_intrs++; + DPRINTFN(7, ("ohci_intr: sc=%p intrs=0x%x(0x%x) eintrs=0x%x\n", + sc, (u_int)intrs, OREAD4(sc, OHCI_INTERRUPT_STATUS), + (u_int)eintrs)); + + if (eintrs & OHCI_SO) { + sc->sc_overrun_cnt++; + if (usbd_ratecheck(&sc->sc_overrun_ntc)) { + printf("%s: %u scheduling overruns\n", + USBDEVNAME(sc->sc_bus.bdev), sc->sc_overrun_cnt); + sc->sc_overrun_cnt = 0; + } + /* XXX do what */ + eintrs &= ~OHCI_SO; + } + if (eintrs & OHCI_WDH) { + ohci_add_done(sc, done &~ OHCI_DONE_INTRS); + usb_schedsoftintr(&sc->sc_bus); + eintrs &= ~OHCI_WDH; + } + if (eintrs & OHCI_RD) { + printf("%s: resume detect\n", USBDEVNAME(sc->sc_bus.bdev)); + /* XXX process resume detect */ + } + if (eintrs & OHCI_UE) { + printf("%s: unrecoverable error, controller halted\n", + USBDEVNAME(sc->sc_bus.bdev)); + OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); + /* XXX what else */ + } + if (eintrs & OHCI_RHSC) { + ohci_rhsc(sc, sc->sc_intrxfer); + /* + * Disable RHSC interrupt for now, because it will be + * on until the port has been reset. + */ + ohci_rhsc_able(sc, 0); + /* Do not allow RHSC interrupts > 1 per second */ + usb_callout(sc->sc_tmo_rhsc, hz, ohci_rhsc_enable, sc); + eintrs &= ~OHCI_RHSC; + } + + sc->sc_bus.intr_context--; + + if (eintrs != 0) { + /* Block unprocessed interrupts. XXX */ + OWRITE4(sc, OHCI_INTERRUPT_DISABLE, eintrs); + sc->sc_eintrs &= ~eintrs; + printf("%s: blocking intrs 0x%x\n", + USBDEVNAME(sc->sc_bus.bdev), eintrs); + } + + return (1); +} + +void +ohci_rhsc_able(ohci_softc_t *sc, int on) +{ + DPRINTFN(4, ("ohci_rhsc_able: on=%d\n", on)); + if (on) { + sc->sc_eintrs |= OHCI_RHSC; + OWRITE4(sc, OHCI_INTERRUPT_ENABLE, OHCI_RHSC); + } else { + sc->sc_eintrs &= ~OHCI_RHSC; + OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_RHSC); + } +} + +void +ohci_rhsc_enable(void *v_sc) +{ + ohci_softc_t *sc = v_sc; + + ohci_rhsc_able(sc, 1); +} + +#ifdef USB_DEBUG +char *ohci_cc_strs[] = { + "NO_ERROR", + "CRC", + "BIT_STUFFING", + "DATA_TOGGLE_MISMATCH", + "STALL", + "DEVICE_NOT_RESPONDING", + "PID_CHECK_FAILURE", + "UNEXPECTED_PID", + "DATA_OVERRUN", + "DATA_UNDERRUN", + "BUFFER_OVERRUN", + "BUFFER_UNDERRUN", + "reserved", + "reserved", + "NOT_ACCESSED", + "NOT_ACCESSED" +}; +#endif + +void +ohci_add_done(ohci_softc_t *sc, ohci_physaddr_t done) +{ + ohci_soft_itd_t *sitd, *sidone, **ip; + ohci_soft_td_t *std, *sdone, **p; + + /* Reverse the done list. */ + for (sdone = NULL, sidone = NULL; done != 0; ) { + std = ohci_hash_find_td(sc, done); + if (std != NULL) { + std->dnext = sdone; + done = le32toh(std->td.td_nexttd); + sdone = std; + DPRINTFN(10,("add TD %p\n", std)); + continue; + } + sitd = ohci_hash_find_itd(sc, done); + if (sitd != NULL) { + sitd->dnext = sidone; + done = le32toh(sitd->itd.itd_nextitd); + sidone = sitd; + DPRINTFN(5,("add ITD %p\n", sitd)); + continue; + } + panic("ohci_add_done: addr 0x%08lx not found\n", (u_long)done); + } + + /* sdone & sidone now hold the done lists. */ + /* Put them on the already processed lists. */ + for (p = &sc->sc_sdone; *p != NULL; p = &(*p)->dnext) + ; + *p = sdone; + for (ip = &sc->sc_sidone; *ip != NULL; ip = &(*ip)->dnext) + ; + *ip = sidone; +} + +void +ohci_softintr(void *v) +{ + ohci_softc_t *sc = v; + ohci_soft_itd_t *sitd, *sidone, *sitdnext; + ohci_soft_td_t *std, *sdone, *stdnext; + usbd_xfer_handle xfer; + int len, cc, s; + + DPRINTFN(10,("ohci_softintr: enter\n:")); + + sc->sc_bus.intr_context++; + + s = splhardusb(); + sdone = sc->sc_sdone; + sc->sc_sdone = NULL; + sidone = sc->sc_sidone; + sc->sc_sidone = NULL; + splx(s); + + DPRINTFN(10,("ohci_softintr: sdone=%p sidone=%p\n", sdone, sidone)); + +#ifdef USB_DEBUG + if (ohcidebug > 10) { + DPRINTF(("ohci_process_done: TD done:\n")); + ohci_dump_tds(sdone); + } +#endif + + for (std = sdone; std; std = stdnext) { + xfer = std->xfer; + stdnext = std->dnext; + DPRINTFN(10, ("ohci_process_done: std=%p xfer=%p hcpriv=%p\n", + std, xfer, (xfer ? xfer->hcpriv : NULL))); + if (xfer == NULL || (std->flags & OHCI_TD_HANDLED)) { + /* + * xfer == NULL: There seems to be no xfer associated + * with this TD. It is tailp that happened to end up on + * the done queue. + * flags & OHCI_TD_HANDLED: The TD has already been + * handled by process_done and should not be done again. + * Shouldn't happen, but some chips are broken(?). + */ + continue; + } + if (xfer->status == USBD_CANCELLED || + xfer->status == USBD_TIMEOUT) { + DPRINTF(("ohci_process_done: cancel/timeout %p\n", + xfer)); + /* Handled by abort routine. */ + continue; + } + usb_uncallout(xfer->timeout_handle, ohci_timeout, xfer); + cc = OHCI_TD_GET_CC(le32toh(std->td.td_flags)); + if (cc == OHCI_CC_NO_ERROR) { + len = std->len; + if (std->td.td_cbp != 0) + len -= le32toh(std->td.td_be) - + le32toh(std->td.td_cbp) + 1; + DPRINTFN(10, ("ohci_process_done: len=%d, flags=0x%x\n", + len, std->flags)); + if (std->flags & OHCI_ADD_LEN) + xfer->actlen += len; + if (std->flags & OHCI_CALL_DONE) { + xfer->status = USBD_NORMAL_COMPLETION; + usb_transfer_complete(xfer); + } + ohci_free_std(sc, std); + } else { + /* + * Endpoint is halted. First unlink all the TDs + * belonging to the failed transfer, and then restart + * the endpoint. + */ + ohci_soft_td_t *p, *n; + struct ohci_pipe *opipe = + (struct ohci_pipe *)xfer->pipe; + + DPRINTFN(15,("ohci_process_done: error cc=%d (%s)\n", + OHCI_TD_GET_CC(le32toh(std->td.td_flags)), + ohci_cc_strs[OHCI_TD_GET_CC(le32toh(std->td.td_flags))])); + + + /* Mark all the TDs in the done queue for the current + * xfer as handled + */ + for (p = stdnext; p; p = p->dnext) { + if (p->xfer == xfer) + p->flags |= OHCI_TD_HANDLED; + } + + /* remove TDs */ + for (p = std; p->xfer == xfer; p = n) { + n = p->nexttd; + ohci_free_std(sc, p); + } + + /* clear halt */ + opipe->sed->ed.ed_headp = htole32(p->physaddr); + OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF); + + if (cc == OHCI_CC_STALL) + xfer->status = USBD_STALLED; + else + xfer->status = USBD_IOERROR; + usb_transfer_complete(xfer); + } + } + +#ifdef USB_DEBUG + if (ohcidebug > 10) { + DPRINTF(("ohci_softintr: ITD done:\n")); + ohci_dump_itds(sidone); + } +#endif + + for (sitd = sidone; sitd != NULL; sitd = sitdnext) { + xfer = sitd->xfer; + sitdnext = sitd->dnext; + DPRINTFN(1, ("ohci_process_done: sitd=%p xfer=%p hcpriv=%p\n", + sitd, xfer, xfer ? xfer->hcpriv : 0)); + if (xfer == NULL) + continue; + if (xfer->status == USBD_CANCELLED || + xfer->status == USBD_TIMEOUT) { + DPRINTF(("ohci_process_done: cancel/timeout %p\n", + xfer)); + /* Handled by abort routine. */ + continue; + } +#ifdef DIAGNOSTIC + if (sitd->isdone) + printf("ohci_softintr: sitd=%p is done\n", sitd); + sitd->isdone = 1; +#endif + cc = OHCI_ITD_GET_CC(le32toh(sitd->itd.itd_flags)); + if (cc == OHCI_CC_NO_ERROR) { + /* XXX compute length for input */ + struct ohci_pipe *opipe = + (struct ohci_pipe *)xfer->pipe; + if (sitd->flags & OHCI_CALL_DONE) { + opipe->u.iso.inuse -= xfer->nframes; + /* XXX update frlengths with actual length */ + /* XXX xfer->actlen = actlen; */ + xfer->status = USBD_NORMAL_COMPLETION; + usb_transfer_complete(xfer); + } + } else { + /* XXX Do more */ + xfer->status = USBD_IOERROR; + usb_transfer_complete(xfer); + } + } + +#ifdef USB_USE_SOFTINTR + if (sc->sc_softwake) { + sc->sc_softwake = 0; + wakeup(&sc->sc_softwake); + } +#endif /* USB_USE_SOFTINTR */ + + sc->sc_bus.intr_context--; + DPRINTFN(10,("ohci_softintr: done:\n")); +} + +void +ohci_device_ctrl_done(usbd_xfer_handle xfer) +{ + DPRINTFN(10,("ohci_ctrl_done: xfer=%p\n", xfer)); + +#ifdef DIAGNOSTIC + if (!(xfer->rqflags & URQ_REQUEST)) { + panic("ohci_ctrl_done: not a request\n"); + } +#endif + xfer->hcpriv = NULL; +} + +void +ohci_device_intr_done(usbd_xfer_handle xfer) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; + ohci_softc_t *sc = (ohci_softc_t *)opipe->pipe.device->bus; + ohci_soft_ed_t *sed = opipe->sed; + ohci_soft_td_t *data, *tail; + + + DPRINTFN(10,("ohci_intr_done: xfer=%p, actlen=%d\n", + xfer, xfer->actlen)); + + xfer->hcpriv = NULL; + + if (xfer->pipe->repeat) { + data = opipe->tail.td; + tail = ohci_alloc_std(sc); /* XXX should reuse TD */ + if (tail == NULL) { + xfer->status = USBD_NOMEM; + return; + } + tail->xfer = NULL; + + data->td.td_flags = htole32( + OHCI_TD_IN | OHCI_TD_NOCC | + OHCI_TD_SET_DI(1) | OHCI_TD_TOGGLE_CARRY); + if (xfer->flags & USBD_SHORT_XFER_OK) + data->td.td_flags |= htole32(OHCI_TD_R); + data->td.td_cbp = htole32(DMAADDR(&xfer->dmabuf, 0)); + data->nexttd = tail; + data->td.td_nexttd = htole32(tail->physaddr); + data->td.td_be = htole32(le32toh(data->td.td_cbp) + + xfer->length - 1); + data->len = xfer->length; + data->xfer = xfer; + data->flags = OHCI_CALL_DONE | OHCI_ADD_LEN; + xfer->hcpriv = data; + xfer->actlen = 0; + + sed->ed.ed_tailp = htole32(tail->physaddr); + opipe->tail.td = tail; + } +} + +void +ohci_device_bulk_done(usbd_xfer_handle xfer) +{ + DPRINTFN(10,("ohci_bulk_done: xfer=%p, actlen=%d\n", + xfer, xfer->actlen)); + + xfer->hcpriv = NULL; +} + +void +ohci_rhsc(ohci_softc_t *sc, usbd_xfer_handle xfer) +{ + usbd_pipe_handle pipe; + struct ohci_pipe *opipe; + u_char *p; + int i, m; + int hstatus; + + hstatus = OREAD4(sc, OHCI_RH_STATUS); + DPRINTF(("ohci_rhsc: sc=%p xfer=%p hstatus=0x%08x\n", + sc, xfer, hstatus)); + + if (xfer == NULL) { + /* Just ignore the change. */ + return; + } + + pipe = xfer->pipe; + opipe = (struct ohci_pipe *)pipe; + + p = KERNADDR(&xfer->dmabuf, 0); + m = min(sc->sc_noport, xfer->length * 8 - 1); + memset(p, 0, xfer->length); + for (i = 1; i <= m; i++) { + /* Pick out CHANGE bits from the status reg. */ + if (OREAD4(sc, OHCI_RH_PORT_STATUS(i)) >> 16) + p[i/8] |= 1 << (i%8); + } + DPRINTF(("ohci_rhsc: change=0x%02x\n", *p)); + xfer->actlen = xfer->length; + xfer->status = USBD_NORMAL_COMPLETION; + + usb_transfer_complete(xfer); +} + +void +ohci_root_intr_done(usbd_xfer_handle xfer) +{ + xfer->hcpriv = NULL; +} + +void +ohci_root_ctrl_done(usbd_xfer_handle xfer) +{ + xfer->hcpriv = NULL; +} + +/* + * Wait here until controller claims to have an interrupt. + * Then call ohci_intr and return. Use timeout to avoid waiting + * too long. + */ +void +ohci_waitintr(ohci_softc_t *sc, usbd_xfer_handle xfer) +{ + int timo = xfer->timeout; + int usecs; + u_int32_t intrs; + + xfer->status = USBD_IN_PROGRESS; + for (usecs = timo * 1000000 / hz; usecs > 0; usecs -= 1000) { + usb_delay_ms(&sc->sc_bus, 1); + if (sc->sc_dying) + break; + intrs = OREAD4(sc, OHCI_INTERRUPT_STATUS) & sc->sc_eintrs; + DPRINTFN(15,("ohci_waitintr: 0x%04x\n", intrs)); +#ifdef USB_DEBUG + if (ohcidebug > 15) + ohci_dumpregs(sc); +#endif + if (intrs) { + ohci_intr1(sc); + if (xfer->status != USBD_IN_PROGRESS) + return; + } + } + + /* Timeout */ + DPRINTF(("ohci_waitintr: timeout\n")); + xfer->status = USBD_TIMEOUT; + usb_transfer_complete(xfer); + /* XXX should free TD */ +} + +void +ohci_poll(struct usbd_bus *bus) +{ + ohci_softc_t *sc = (ohci_softc_t *)bus; +#ifdef USB_DEBUG + static int last; + int new; + new = OREAD4(sc, OHCI_INTERRUPT_STATUS); + if (new != last) { + DPRINTFN(10,("ohci_poll: intrs=0x%04x\n", new)); + last = new; + } +#endif + + if (OREAD4(sc, OHCI_INTERRUPT_STATUS) & sc->sc_eintrs) + ohci_intr1(sc); +} + +usbd_status +ohci_device_request(usbd_xfer_handle xfer) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; + usb_device_request_t *req = &xfer->request; + usbd_device_handle dev = opipe->pipe.device; + ohci_softc_t *sc = (ohci_softc_t *)dev->bus; + int addr = dev->address; + ohci_soft_td_t *data = 0; + ohci_soft_td_t *setup, *stat, *next, *tail; + ohci_soft_ed_t *sed; + int isread; + int len; + usbd_status err; + int s; + + isread = req->bmRequestType & UT_READ; + len = UGETW(req->wLength); + + DPRINTFN(3,("ohci_device_control type=0x%02x, request=0x%02x, " + "wValue=0x%04x, wIndex=0x%04x len=%d, addr=%d, endpt=%d\n", + req->bmRequestType, req->bRequest, UGETW(req->wValue), + UGETW(req->wIndex), len, addr, + opipe->pipe.endpoint->edesc->bEndpointAddress)); + + setup = opipe->tail.td; + stat = ohci_alloc_std(sc); + if (stat == NULL) { + err = USBD_NOMEM; + goto bad1; + } + tail = ohci_alloc_std(sc); + if (tail == NULL) { + err = USBD_NOMEM; + goto bad2; + } + tail->xfer = NULL; + + sed = opipe->sed; + opipe->u.ctl.length = len; + + /* Update device address and length since they may have changed. */ + /* XXX This only needs to be done once, but it's too early in open. */ + /* XXXX Should not touch ED here! */ + sed->ed.ed_flags = htole32( + (le32toh(sed->ed.ed_flags) & ~(OHCI_ED_ADDRMASK | OHCI_ED_MAXPMASK)) | + OHCI_ED_SET_FA(addr) | + OHCI_ED_SET_MAXP(UGETW(opipe->pipe.endpoint->edesc->wMaxPacketSize))); + + /* Set up data transaction */ + if (len != 0) { + data = ohci_alloc_std(sc); + if (data == NULL) { + err = USBD_NOMEM; + goto bad3; + } + data->td.td_flags = htole32( + (isread ? OHCI_TD_IN : OHCI_TD_OUT) | OHCI_TD_NOCC | + OHCI_TD_TOGGLE_1 | OHCI_TD_NOINTR | + (xfer->flags & USBD_SHORT_XFER_OK ? OHCI_TD_R : 0)); + data->td.td_cbp = htole32(DMAADDR(&xfer->dmabuf, 0)); + data->nexttd = stat; + data->td.td_nexttd = htole32(stat->physaddr); + data->td.td_be = htole32(le32toh(data->td.td_cbp) + len - 1); + data->len = len; + data->xfer = xfer; + data->flags = OHCI_ADD_LEN; + + next = data; + stat->flags = OHCI_CALL_DONE; + } else { + next = stat; + /* XXX ADD_LEN? */ + stat->flags = OHCI_CALL_DONE | OHCI_ADD_LEN; + } + + memcpy(KERNADDR(&opipe->u.ctl.reqdma, 0), req, sizeof *req); + + setup->td.td_flags = htole32(OHCI_TD_SETUP | OHCI_TD_NOCC | + OHCI_TD_TOGGLE_0 | OHCI_TD_NOINTR); + setup->td.td_cbp = htole32(DMAADDR(&opipe->u.ctl.reqdma, 0)); + setup->nexttd = next; + setup->td.td_nexttd = htole32(next->physaddr); + setup->td.td_be = htole32(le32toh(setup->td.td_cbp) + sizeof *req - 1); + setup->len = 0; + setup->xfer = xfer; + setup->flags = 0; + xfer->hcpriv = setup; + + stat->td.td_flags = htole32( + (isread ? OHCI_TD_OUT : OHCI_TD_IN) | + OHCI_TD_NOCC | OHCI_TD_TOGGLE_1 | OHCI_TD_SET_DI(1)); + stat->td.td_cbp = 0; + stat->nexttd = tail; + stat->td.td_nexttd = htole32(tail->physaddr); + stat->td.td_be = 0; + stat->len = 0; + stat->xfer = xfer; + +#ifdef USB_DEBUG + if (ohcidebug > 5) { + DPRINTF(("ohci_device_request:\n")); + ohci_dump_ed(sed); + ohci_dump_tds(setup); + } +#endif + + /* Insert ED in schedule */ + s = splusb(); + sed->ed.ed_tailp = htole32(tail->physaddr); + opipe->tail.td = tail; + OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF); + if (xfer->timeout && !sc->sc_bus.use_polling) { + usb_callout(xfer->timeout_handle, MS_TO_TICKS(xfer->timeout), + ohci_timeout, xfer); + } + splx(s); + +#ifdef USB_DEBUG + if (ohcidebug > 20) { + delay(10000); + DPRINTF(("ohci_device_request: status=%x\n", + OREAD4(sc, OHCI_COMMAND_STATUS))); + ohci_dumpregs(sc); + printf("ctrl head:\n"); + ohci_dump_ed(sc->sc_ctrl_head); + printf("sed:\n"); + ohci_dump_ed(sed); + ohci_dump_tds(setup); + } +#endif + + return (USBD_NORMAL_COMPLETION); + + bad3: + ohci_free_std(sc, tail); + bad2: + ohci_free_std(sc, stat); + bad1: + return (err); +} + +/* + * Add an ED to the schedule. Called at splusb(). + */ +void +ohci_add_ed(ohci_soft_ed_t *sed, ohci_soft_ed_t *head) +{ + DPRINTFN(8,("ohci_add_ed: sed=%p head=%p\n", sed, head)); + + SPLUSBCHECK; + sed->next = head->next; + sed->ed.ed_nexted = head->ed.ed_nexted; + head->next = sed; + head->ed.ed_nexted = htole32(sed->physaddr); +} + +/* + * Remove an ED from the schedule. Called at splusb(). + */ +void +ohci_rem_ed(ohci_soft_ed_t *sed, ohci_soft_ed_t *head) +{ + ohci_soft_ed_t *p; + + SPLUSBCHECK; + + /* XXX */ + for (p = head; p != NULL && p->next != sed; p = p->next) + ; + if (p == NULL) + panic("ohci_rem_ed: ED not found\n"); + p->next = sed->next; + p->ed.ed_nexted = sed->ed.ed_nexted; +} + +/* + * When a transfer is completed the TD is added to the done queue by + * the host controller. This queue is the processed by software. + * Unfortunately the queue contains the physical address of the TD + * and we have no simple way to translate this back to a kernel address. + * To make the translation possible (and fast) we use a hash table of + * TDs currently in the schedule. The physical address is used as the + * hash value. + */ + +#define HASH(a) (((a) >> 4) % OHCI_HASH_SIZE) +/* Called at splusb() */ +void +ohci_hash_add_td(ohci_softc_t *sc, ohci_soft_td_t *std) +{ + int h = HASH(std->physaddr); + + SPLUSBCHECK; + + LIST_INSERT_HEAD(&sc->sc_hash_tds[h], std, hnext); +} + +/* Called at splusb() */ +void +ohci_hash_rem_td(ohci_softc_t *sc, ohci_soft_td_t *std) +{ + SPLUSBCHECK; + + LIST_REMOVE(std, hnext); +} + +ohci_soft_td_t * +ohci_hash_find_td(ohci_softc_t *sc, ohci_physaddr_t a) +{ + int h = HASH(a); + ohci_soft_td_t *std; + + /* if these are present they should be masked out at an earlier + * stage. + */ + KASSERT((a&~OHCI_HEADMASK) == 0, ("%s: 0x%b has lower bits set\n", + USBDEVNAME(sc->sc_bus.bdev), + (int) a, "\20\1HALT\2TOGGLE")); + + for (std = LIST_FIRST(&sc->sc_hash_tds[h]); + std != NULL; + std = LIST_NEXT(std, hnext)) + if (std->physaddr == a) + return (std); + + DPRINTF(("%s: ohci_hash_find_td: addr 0x%08lx not found\n", + USBDEVNAME(sc->sc_bus.bdev), (u_long) a)); + return (NULL); +} + +/* Called at splusb() */ +void +ohci_hash_add_itd(ohci_softc_t *sc, ohci_soft_itd_t *sitd) +{ + int h = HASH(sitd->physaddr); + + SPLUSBCHECK; + + DPRINTFN(10,("ohci_hash_add_itd: sitd=%p physaddr=0x%08lx\n", + sitd, (u_long)sitd->physaddr)); + + LIST_INSERT_HEAD(&sc->sc_hash_itds[h], sitd, hnext); +} + +/* Called at splusb() */ +void +ohci_hash_rem_itd(ohci_softc_t *sc, ohci_soft_itd_t *sitd) +{ + SPLUSBCHECK; + + DPRINTFN(10,("ohci_hash_rem_itd: sitd=%p physaddr=0x%08lx\n", + sitd, (u_long)sitd->physaddr)); + + LIST_REMOVE(sitd, hnext); +} + +ohci_soft_itd_t * +ohci_hash_find_itd(ohci_softc_t *sc, ohci_physaddr_t a) +{ + int h = HASH(a); + ohci_soft_itd_t *sitd; + + for (sitd = LIST_FIRST(&sc->sc_hash_itds[h]); + sitd != NULL; + sitd = LIST_NEXT(sitd, hnext)) + if (sitd->physaddr == a) + return (sitd); + return (NULL); +} + +void +ohci_timeout(void *addr) +{ + struct ohci_xfer *oxfer = addr; + struct ohci_pipe *opipe = (struct ohci_pipe *)oxfer->xfer.pipe; + ohci_softc_t *sc = (ohci_softc_t *)opipe->pipe.device->bus; + + DPRINTF(("ohci_timeout: oxfer=%p\n", oxfer)); + + if (sc->sc_dying) { + ohci_abort_xfer(&oxfer->xfer, USBD_TIMEOUT); + return; + } + + /* Execute the abort in a process context. */ + usb_init_task(&oxfer->abort_task, ohci_timeout_task, addr); + usb_add_task(oxfer->xfer.pipe->device, &oxfer->abort_task); +} + +void +ohci_timeout_task(void *addr) +{ + usbd_xfer_handle xfer = addr; + int s; + + DPRINTF(("ohci_timeout_task: xfer=%p\n", xfer)); + + s = splusb(); + ohci_abort_xfer(xfer, USBD_TIMEOUT); + splx(s); +} + +#ifdef USB_DEBUG +void +ohci_dump_tds(ohci_soft_td_t *std) +{ + for (; std; std = std->nexttd) + ohci_dump_td(std); +} + +void +ohci_dump_td(ohci_soft_td_t *std) +{ + char sbuf[128]; + + bitmask_snprintf((u_int32_t)le32toh(std->td.td_flags), + "\20\23R\24OUT\25IN\31TOG1\32SETTOGGLE", + sbuf, sizeof(sbuf)); + + printf("TD(%p) at %08lx: %s delay=%d ec=%d cc=%d\ncbp=0x%08lx " + "nexttd=0x%08lx be=0x%08lx\n", + std, (u_long)std->physaddr, sbuf, + OHCI_TD_GET_DI(le32toh(std->td.td_flags)), + OHCI_TD_GET_EC(le32toh(std->td.td_flags)), + OHCI_TD_GET_CC(le32toh(std->td.td_flags)), + (u_long)le32toh(std->td.td_cbp), + (u_long)le32toh(std->td.td_nexttd), + (u_long)le32toh(std->td.td_be)); +} + +void +ohci_dump_itd(ohci_soft_itd_t *sitd) +{ + int i; + + printf("ITD(%p) at %08lx: sf=%d di=%d fc=%d cc=%d\n" + "bp0=0x%08lx next=0x%08lx be=0x%08lx\n", + sitd, (u_long)sitd->physaddr, + OHCI_ITD_GET_SF(le32toh(sitd->itd.itd_flags)), + OHCI_ITD_GET_DI(le32toh(sitd->itd.itd_flags)), + OHCI_ITD_GET_FC(le32toh(sitd->itd.itd_flags)), + OHCI_ITD_GET_CC(le32toh(sitd->itd.itd_flags)), + (u_long)le32toh(sitd->itd.itd_bp0), + (u_long)le32toh(sitd->itd.itd_nextitd), + (u_long)le32toh(sitd->itd.itd_be)); + for (i = 0; i < OHCI_ITD_NOFFSET; i++) + printf("offs[%d]=0x%04x ", i, + (u_int)le16toh(sitd->itd.itd_offset[i])); + printf("\n"); +} + +void +ohci_dump_itds(ohci_soft_itd_t *sitd) +{ + for (; sitd; sitd = sitd->nextitd) + ohci_dump_itd(sitd); +} + +void +ohci_dump_ed(ohci_soft_ed_t *sed) +{ + char sbuf[128], sbuf2[128]; + + bitmask_snprintf((u_int32_t)le32toh(sed->ed.ed_flags), + "\20\14OUT\15IN\16LOWSPEED\17SKIP\20ISO", + sbuf, sizeof(sbuf)); + bitmask_snprintf((u_int32_t)le32toh(sed->ed.ed_headp), + "\20\1HALT\2CARRY", sbuf2, sizeof(sbuf2)); + + printf("ED(%p) at 0x%08lx: addr=%d endpt=%d maxp=%d flags=%s\ntailp=0x%08lx " + "headflags=%s headp=0x%08lx nexted=0x%08lx\n", + sed, (u_long)sed->physaddr, + OHCI_ED_GET_FA(le32toh(sed->ed.ed_flags)), + OHCI_ED_GET_EN(le32toh(sed->ed.ed_flags)), + OHCI_ED_GET_MAXP(le32toh(sed->ed.ed_flags)), sbuf, + (u_long)le32toh(sed->ed.ed_tailp), sbuf2, + (u_long)le32toh(sed->ed.ed_headp), + (u_long)le32toh(sed->ed.ed_nexted)); +} +#endif + +usbd_status +ohci_open(usbd_pipe_handle pipe) +{ + usbd_device_handle dev = pipe->device; + ohci_softc_t *sc = (ohci_softc_t *)dev->bus; + usb_endpoint_descriptor_t *ed = pipe->endpoint->edesc; + struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; + u_int8_t addr = dev->address; + u_int8_t xfertype = ed->bmAttributes & UE_XFERTYPE; + ohci_soft_ed_t *sed; + ohci_soft_td_t *std; + ohci_soft_itd_t *sitd; + ohci_physaddr_t tdphys; + u_int32_t fmt; + usbd_status err; + int s; + int ival; + + DPRINTFN(1, ("ohci_open: pipe=%p, addr=%d, endpt=%d (%d)\n", + pipe, addr, ed->bEndpointAddress, sc->sc_addr)); + + if (sc->sc_dying) + return (USBD_IOERROR); + + std = NULL; + sed = NULL; + + if (addr == sc->sc_addr) { + switch (ed->bEndpointAddress) { + case USB_CONTROL_ENDPOINT: + pipe->methods = &ohci_root_ctrl_methods; + break; + case UE_DIR_IN | OHCI_INTR_ENDPT: + pipe->methods = &ohci_root_intr_methods; + break; + default: + return (USBD_INVAL); + } + } else { + sed = ohci_alloc_sed(sc); + if (sed == NULL) + goto bad0; + opipe->sed = sed; + if (xfertype == UE_ISOCHRONOUS) { + sitd = ohci_alloc_sitd(sc); + if (sitd == NULL) + goto bad1; + opipe->tail.itd = sitd; + tdphys = sitd->physaddr; + fmt = OHCI_ED_FORMAT_ISO; + if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN) + fmt |= OHCI_ED_DIR_IN; + else + fmt |= OHCI_ED_DIR_OUT; + } else { + std = ohci_alloc_std(sc); + if (std == NULL) + goto bad1; + opipe->tail.td = std; + tdphys = std->physaddr; + fmt = OHCI_ED_FORMAT_GEN | OHCI_ED_DIR_TD; + } + sed->ed.ed_flags = htole32( + OHCI_ED_SET_FA(addr) | + OHCI_ED_SET_EN(ed->bEndpointAddress) | + (dev->speed == USB_SPEED_LOW ? OHCI_ED_SPEED : 0) | + fmt | + OHCI_ED_SET_MAXP(UGETW(ed->wMaxPacketSize))); + sed->ed.ed_headp = sed->ed.ed_tailp = htole32(tdphys); + + switch (xfertype) { + case UE_CONTROL: + pipe->methods = &ohci_device_ctrl_methods; + err = usb_allocmem(&sc->sc_bus, + sizeof(usb_device_request_t), + 0, &opipe->u.ctl.reqdma); + if (err) + goto bad; + s = splusb(); + ohci_add_ed(sed, sc->sc_ctrl_head); + splx(s); + break; + case UE_INTERRUPT: + pipe->methods = &ohci_device_intr_methods; + ival = pipe->interval; + if (ival == USBD_DEFAULT_INTERVAL) + ival = ed->bInterval; + return (ohci_device_setintr(sc, opipe, ival)); + case UE_ISOCHRONOUS: + pipe->methods = &ohci_device_isoc_methods; + return (ohci_setup_isoc(pipe)); + case UE_BULK: + pipe->methods = &ohci_device_bulk_methods; + s = splusb(); + ohci_add_ed(sed, sc->sc_bulk_head); + splx(s); + break; + } + } + return (USBD_NORMAL_COMPLETION); + + bad: + if (std != NULL) + ohci_free_std(sc, std); + bad1: + if (sed != NULL) + ohci_free_sed(sc, sed); + bad0: + return (USBD_NOMEM); + +} + +/* + * Close a reqular pipe. + * Assumes that there are no pending transactions. + */ +void +ohci_close_pipe(usbd_pipe_handle pipe, ohci_soft_ed_t *head) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; + ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; + ohci_soft_ed_t *sed = opipe->sed; + int s; + + s = splusb(); +#ifdef DIAGNOSTIC + sed->ed.ed_flags |= htole32(OHCI_ED_SKIP); + if ((le32toh(sed->ed.ed_tailp) & OHCI_HEADMASK) != + (le32toh(sed->ed.ed_headp) & OHCI_HEADMASK)) { + ohci_soft_td_t *std; + std = ohci_hash_find_td(sc, le32toh(sed->ed.ed_headp)); + printf("ohci_close_pipe: pipe not empty sed=%p hd=0x%x " + "tl=0x%x pipe=%p, std=%p\n", sed, + (int)le32toh(sed->ed.ed_headp), + (int)le32toh(sed->ed.ed_tailp), + pipe, std); +#ifdef USB_DEBUG + usbd_dump_pipe(&opipe->pipe); +#endif +#ifdef USB_DEBUG + ohci_dump_ed(sed); + if (std) + ohci_dump_td(std); +#endif + usb_delay_ms(&sc->sc_bus, 2); + if ((le32toh(sed->ed.ed_tailp) & OHCI_HEADMASK) != + (le32toh(sed->ed.ed_headp) & OHCI_HEADMASK)) + printf("ohci_close_pipe: pipe still not empty\n"); + } +#endif + ohci_rem_ed(sed, head); + /* Make sure the host controller is not touching this ED */ + usb_delay_ms(&sc->sc_bus, 1); + splx(s); + ohci_free_sed(sc, opipe->sed); +} + +/* + * Abort a device request. + * If this routine is called at splusb() it guarantees that the request + * will be removed from the hardware scheduling and that the callback + * for it will be called with USBD_CANCELLED status. + * It's impossible to guarantee that the requested transfer will not + * have happened since the hardware runs concurrently. + * If the transaction has already happened we rely on the ordinary + * interrupt processing to process it. + */ +void +ohci_abort_xfer(usbd_xfer_handle xfer, usbd_status status) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; + ohci_softc_t *sc = (ohci_softc_t *)opipe->pipe.device->bus; + ohci_soft_ed_t *sed = opipe->sed; + ohci_soft_td_t *p, *n; + ohci_physaddr_t headp; + int s, hit; + + DPRINTF(("ohci_abort_xfer: xfer=%p pipe=%p sed=%p\n", xfer, opipe,sed)); + + if (sc->sc_dying) { + /* If we're dying, just do the software part. */ + s = splusb(); + xfer->status = status; /* make software ignore it */ + usb_uncallout(xfer->timeout_handle, ohci_timeout, xfer); + usb_transfer_complete(xfer); + splx(s); + } + + if (xfer->device->bus->intr_context || !curproc) + panic("ohci_abort_xfer: not in process context\n"); + + /* + * Step 1: Make interrupt routine and hardware ignore xfer. + */ + s = splusb(); + xfer->status = status; /* make software ignore it */ + usb_uncallout(xfer->timeout_handle, ohci_timeout, xfer); + splx(s); + DPRINTFN(1,("ohci_abort_xfer: stop ed=%p\n", sed)); + sed->ed.ed_flags |= htole32(OHCI_ED_SKIP); /* force hardware skip */ + + /* + * Step 2: Wait until we know hardware has finished any possible + * use of the xfer. Also make sure the soft interrupt routine + * has run. + */ + usb_delay_ms(opipe->pipe.device->bus, 20); /* Hardware finishes in 1ms */ + s = splusb(); +#ifdef USB_USE_SOFTINTR + sc->sc_softwake = 1; +#endif /* USB_USE_SOFTINTR */ + usb_schedsoftintr(&sc->sc_bus); +#ifdef USB_USE_SOFTINTR + tsleep(&sc->sc_softwake, PZERO, "ohciab", 0); +#endif /* USB_USE_SOFTINTR */ + splx(s); + + /* + * Step 3: Remove any vestiges of the xfer from the hardware. + * The complication here is that the hardware may have executed + * beyond the xfer we're trying to abort. So as we're scanning + * the TDs of this xfer we check if the hardware points to + * any of them. + */ + s = splusb(); /* XXX why? */ + p = xfer->hcpriv; +#ifdef DIAGNOSTIC + if (p == NULL) { + splx(s); + printf("ohci_abort_xfer: hcpriv is NULL\n"); + return; + } +#endif +#ifdef USB_DEBUG + if (ohcidebug > 1) { + DPRINTF(("ohci_abort_xfer: sed=\n")); + ohci_dump_ed(sed); + ohci_dump_tds(p); + } +#endif + headp = le32toh(sed->ed.ed_headp) & OHCI_HEADMASK; + hit = 0; + for (; p->xfer == xfer; p = n) { + hit |= headp == p->physaddr; + n = p->nexttd; + ohci_free_std(sc, p); + } + /* Zap headp register if hardware pointed inside the xfer. */ + if (hit) { + DPRINTFN(1,("ohci_abort_xfer: set hd=0x08%x, tl=0x%08x\n", + (int)p->physaddr, (int)le32toh(sed->ed.ed_tailp))); + sed->ed.ed_headp = htole32(p->physaddr); /* unlink TDs */ + } else { + DPRINTFN(1,("ohci_abort_xfer: no hit\n")); + } + + /* + * Step 4: Turn on hardware again. + */ + sed->ed.ed_flags &= htole32(~OHCI_ED_SKIP); /* remove hardware skip */ + + /* + * Step 5: Execute callback. + */ + usb_transfer_complete(xfer); + + splx(s); +} + +/* + * Data structures and routines to emulate the root hub. + */ +Static usb_device_descriptor_t ohci_devd = { + USB_DEVICE_DESCRIPTOR_SIZE, + UDESC_DEVICE, /* type */ + {0x00, 0x01}, /* USB version */ + UDCLASS_HUB, /* class */ + UDSUBCLASS_HUB, /* subclass */ + UDPROTO_FSHUB, /* protocol */ + 64, /* max packet */ + {0},{0},{0x00,0x01}, /* device id */ + 1,2,0, /* string indicies */ + 1 /* # of configurations */ +}; + +Static usb_config_descriptor_t ohci_confd = { + USB_CONFIG_DESCRIPTOR_SIZE, + UDESC_CONFIG, + {USB_CONFIG_DESCRIPTOR_SIZE + + USB_INTERFACE_DESCRIPTOR_SIZE + + USB_ENDPOINT_DESCRIPTOR_SIZE}, + 1, + 1, + 0, + UC_SELF_POWERED, + 0 /* max power */ +}; + +Static usb_interface_descriptor_t ohci_ifcd = { + USB_INTERFACE_DESCRIPTOR_SIZE, + UDESC_INTERFACE, + 0, + 0, + 1, + UICLASS_HUB, + UISUBCLASS_HUB, + UIPROTO_FSHUB, + 0 +}; + +Static usb_endpoint_descriptor_t ohci_endpd = { + USB_ENDPOINT_DESCRIPTOR_SIZE, + UDESC_ENDPOINT, + UE_DIR_IN | OHCI_INTR_ENDPT, + UE_INTERRUPT, + {8, 0}, /* max packet */ + 255 +}; + +Static usb_hub_descriptor_t ohci_hubd = { + USB_HUB_DESCRIPTOR_SIZE, + UDESC_HUB, + 0, + {0,0}, + 0, + 0, + {0}, +}; + +Static int +ohci_str(usb_string_descriptor_t *p, int l, const char *s) +{ + int i; + + if (l == 0) + return (0); + p->bLength = 2 * strlen(s) + 2; + if (l == 1) + return (1); + p->bDescriptorType = UDESC_STRING; + l -= 2; + for (i = 0; s[i] && l > 1; i++, l -= 2) + USETW2(p->bString[i], 0, s[i]); + return (2*i+2); +} + +/* + * Simulate a hardware hub by handling all the necessary requests. + */ +Static usbd_status +ohci_root_ctrl_transfer(usbd_xfer_handle xfer) +{ + usbd_status err; + + /* Insert last in queue. */ + err = usb_insert_transfer(xfer); + if (err) + return (err); + + /* Pipe isn't running, start first */ + return (ohci_root_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); +} + +Static usbd_status +ohci_root_ctrl_start(usbd_xfer_handle xfer) +{ + ohci_softc_t *sc = (ohci_softc_t *)xfer->pipe->device->bus; + usb_device_request_t *req; + void *buf = NULL; + int port, i; + int s, len, value, index, l, totlen = 0; + usb_port_status_t ps; + usb_hub_descriptor_t hubd; + usbd_status err; + u_int32_t v; + + if (sc->sc_dying) + return (USBD_IOERROR); + +#ifdef DIAGNOSTIC + if (!(xfer->rqflags & URQ_REQUEST)) + /* XXX panic */ + return (USBD_INVAL); +#endif + req = &xfer->request; + + DPRINTFN(4,("ohci_root_ctrl_control type=0x%02x request=%02x\n", + req->bmRequestType, req->bRequest)); + + len = UGETW(req->wLength); + value = UGETW(req->wValue); + index = UGETW(req->wIndex); + + if (len != 0) + buf = KERNADDR(&xfer->dmabuf, 0); + +#define C(x,y) ((x) | ((y) << 8)) + switch(C(req->bRequest, req->bmRequestType)) { + case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE): + case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE): + case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT): + /* + * DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops + * for the integrated root hub. + */ + break; + case C(UR_GET_CONFIG, UT_READ_DEVICE): + if (len > 0) { + *(u_int8_t *)buf = sc->sc_conf; + totlen = 1; + } + break; + case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): + DPRINTFN(8,("ohci_root_ctrl_control wValue=0x%04x\n", value)); + switch(value >> 8) { + case UDESC_DEVICE: + if ((value & 0xff) != 0) { + err = USBD_IOERROR; + goto ret; + } + totlen = l = min(len, USB_DEVICE_DESCRIPTOR_SIZE); + USETW(ohci_devd.idVendor, sc->sc_id_vendor); + memcpy(buf, &ohci_devd, l); + break; + case UDESC_CONFIG: + if ((value & 0xff) != 0) { + err = USBD_IOERROR; + goto ret; + } + totlen = l = min(len, USB_CONFIG_DESCRIPTOR_SIZE); + memcpy(buf, &ohci_confd, l); + buf = (char *)buf + l; + len -= l; + l = min(len, USB_INTERFACE_DESCRIPTOR_SIZE); + totlen += l; + memcpy(buf, &ohci_ifcd, l); + buf = (char *)buf + l; + len -= l; + l = min(len, USB_ENDPOINT_DESCRIPTOR_SIZE); + totlen += l; + memcpy(buf, &ohci_endpd, l); + break; + case UDESC_STRING: + if (len == 0) + break; + *(u_int8_t *)buf = 0; + totlen = 1; + switch (value & 0xff) { + case 1: /* Vendor */ + totlen = ohci_str(buf, len, sc->sc_vendor); + break; + case 2: /* Product */ + totlen = ohci_str(buf, len, "OHCI root hub"); + break; + } + break; + default: + err = USBD_IOERROR; + goto ret; + } + break; + case C(UR_GET_INTERFACE, UT_READ_INTERFACE): + if (len > 0) { + *(u_int8_t *)buf = 0; + totlen = 1; + } + break; + case C(UR_GET_STATUS, UT_READ_DEVICE): + if (len > 1) { + USETW(((usb_status_t *)buf)->wStatus,UDS_SELF_POWERED); + totlen = 2; + } + break; + case C(UR_GET_STATUS, UT_READ_INTERFACE): + case C(UR_GET_STATUS, UT_READ_ENDPOINT): + if (len > 1) { + USETW(((usb_status_t *)buf)->wStatus, 0); + totlen = 2; + } + break; + case C(UR_SET_ADDRESS, UT_WRITE_DEVICE): + if (value >= USB_MAX_DEVICES) { + err = USBD_IOERROR; + goto ret; + } + sc->sc_addr = value; + break; + case C(UR_SET_CONFIG, UT_WRITE_DEVICE): + if (value != 0 && value != 1) { + err = USBD_IOERROR; + goto ret; + } + sc->sc_conf = value; + break; + case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE): + break; + case C(UR_SET_FEATURE, UT_WRITE_DEVICE): + case C(UR_SET_FEATURE, UT_WRITE_INTERFACE): + case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT): + err = USBD_IOERROR; + goto ret; + case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE): + break; + case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT): + break; + /* Hub requests */ + case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): + break; + case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): + DPRINTFN(8, ("ohci_root_ctrl_control: UR_CLEAR_PORT_FEATURE " + "port=%d feature=%d\n", + index, value)); + if (index < 1 || index > sc->sc_noport) { + err = USBD_IOERROR; + goto ret; + } + port = OHCI_RH_PORT_STATUS(index); + switch(value) { + case UHF_PORT_ENABLE: + OWRITE4(sc, port, UPS_CURRENT_CONNECT_STATUS); + break; + case UHF_PORT_SUSPEND: + OWRITE4(sc, port, UPS_OVERCURRENT_INDICATOR); + break; + case UHF_PORT_POWER: + /* Yes, writing to the LOW_SPEED bit clears power. */ + OWRITE4(sc, port, UPS_LOW_SPEED); + break; + case UHF_C_PORT_CONNECTION: + OWRITE4(sc, port, UPS_C_CONNECT_STATUS << 16); + break; + case UHF_C_PORT_ENABLE: + OWRITE4(sc, port, UPS_C_PORT_ENABLED << 16); + break; + case UHF_C_PORT_SUSPEND: + OWRITE4(sc, port, UPS_C_SUSPEND << 16); + break; + case UHF_C_PORT_OVER_CURRENT: + OWRITE4(sc, port, UPS_C_OVERCURRENT_INDICATOR << 16); + break; + case UHF_C_PORT_RESET: + OWRITE4(sc, port, UPS_C_PORT_RESET << 16); + break; + default: + err = USBD_IOERROR; + goto ret; + } + switch(value) { + case UHF_C_PORT_CONNECTION: + case UHF_C_PORT_ENABLE: + case UHF_C_PORT_SUSPEND: + case UHF_C_PORT_OVER_CURRENT: + case UHF_C_PORT_RESET: + /* Enable RHSC interrupt if condition is cleared. */ + if ((OREAD4(sc, port) >> 16) == 0) + ohci_rhsc_able(sc, 1); + break; + default: + break; + } + break; + case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): + if (value != 0) { + err = USBD_IOERROR; + goto ret; + } + v = OREAD4(sc, OHCI_RH_DESCRIPTOR_A); + hubd = ohci_hubd; + hubd.bNbrPorts = sc->sc_noport; + USETW(hubd.wHubCharacteristics, + (v & OHCI_NPS ? UHD_PWR_NO_SWITCH : + v & OHCI_PSM ? UHD_PWR_GANGED : UHD_PWR_INDIVIDUAL) + /* XXX overcurrent */ + ); + hubd.bPwrOn2PwrGood = OHCI_GET_POTPGT(v); + v = OREAD4(sc, OHCI_RH_DESCRIPTOR_B); + for (i = 0, l = sc->sc_noport; l > 0; i++, l -= 8, v >>= 8) + hubd.DeviceRemovable[i++] = (u_int8_t)v; + hubd.bDescLength = USB_HUB_DESCRIPTOR_SIZE + i; + l = min(len, hubd.bDescLength); + totlen = l; + memcpy(buf, &hubd, l); + break; + case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): + if (len != 4) { + err = USBD_IOERROR; + goto ret; + } + memset(buf, 0, len); /* ? XXX */ + totlen = len; + break; + case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): + DPRINTFN(8,("ohci_root_ctrl_transfer: get port status i=%d\n", + index)); + if (index < 1 || index > sc->sc_noport) { + err = USBD_IOERROR; + goto ret; + } + if (len != 4) { + err = USBD_IOERROR; + goto ret; + } + v = OREAD4(sc, OHCI_RH_PORT_STATUS(index)); + DPRINTFN(8,("ohci_root_ctrl_transfer: port status=0x%04x\n", + v)); + USETW(ps.wPortStatus, v); + USETW(ps.wPortChange, v >> 16); + l = min(len, sizeof ps); + memcpy(buf, &ps, l); + totlen = l; + break; + case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): + err = USBD_IOERROR; + goto ret; + case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): + break; + case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): + if (index < 1 || index > sc->sc_noport) { + err = USBD_IOERROR; + goto ret; + } + port = OHCI_RH_PORT_STATUS(index); + switch(value) { + case UHF_PORT_ENABLE: + OWRITE4(sc, port, UPS_PORT_ENABLED); + break; + case UHF_PORT_SUSPEND: + OWRITE4(sc, port, UPS_SUSPEND); + break; + case UHF_PORT_RESET: + DPRINTFN(5,("ohci_root_ctrl_transfer: reset port %d\n", + index)); + OWRITE4(sc, port, UPS_RESET); + for (i = 0; i < 5; i++) { + usb_delay_ms(&sc->sc_bus, + USB_PORT_ROOT_RESET_DELAY); + if (sc->sc_dying) { + err = USBD_IOERROR; + goto ret; + } + if ((OREAD4(sc, port) & UPS_RESET) == 0) + break; + } + DPRINTFN(8,("ohci port %d reset, status = 0x%04x\n", + index, OREAD4(sc, port))); + break; + case UHF_PORT_POWER: + DPRINTFN(2,("ohci_root_ctrl_transfer: set port power " + "%d\n", index)); + OWRITE4(sc, port, UPS_PORT_POWER); + break; + default: + err = USBD_IOERROR; + goto ret; + } + break; + default: + err = USBD_IOERROR; + goto ret; + } + xfer->actlen = totlen; + err = USBD_NORMAL_COMPLETION; + ret: + xfer->status = err; + s = splusb(); + usb_transfer_complete(xfer); + splx(s); + return (USBD_IN_PROGRESS); +} + +/* Abort a root control request. */ +Static void +ohci_root_ctrl_abort(usbd_xfer_handle xfer) +{ + /* Nothing to do, all transfers are synchronous. */ +} + +/* Close the root pipe. */ +Static void +ohci_root_ctrl_close(usbd_pipe_handle pipe) +{ + DPRINTF(("ohci_root_ctrl_close\n")); + /* Nothing to do. */ +} + +Static usbd_status +ohci_root_intr_transfer(usbd_xfer_handle xfer) +{ + usbd_status err; + + /* Insert last in queue. */ + err = usb_insert_transfer(xfer); + if (err) + return (err); + + /* Pipe isn't running, start first */ + return (ohci_root_intr_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); +} + +Static usbd_status +ohci_root_intr_start(usbd_xfer_handle xfer) +{ + usbd_pipe_handle pipe = xfer->pipe; + ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; + + if (sc->sc_dying) + return (USBD_IOERROR); + + sc->sc_intrxfer = xfer; + + return (USBD_IN_PROGRESS); +} + +/* Abort a root interrupt request. */ +Static void +ohci_root_intr_abort(usbd_xfer_handle xfer) +{ + int s; + + if (xfer->pipe->intrxfer == xfer) { + DPRINTF(("ohci_root_intr_abort: remove\n")); + xfer->pipe->intrxfer = NULL; + } + xfer->status = USBD_CANCELLED; + s = splusb(); + usb_transfer_complete(xfer); + splx(s); +} + +/* Close the root pipe. */ +Static void +ohci_root_intr_close(usbd_pipe_handle pipe) +{ + ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; + + DPRINTF(("ohci_root_intr_close\n")); + + sc->sc_intrxfer = NULL; +} + +/************************/ + +Static usbd_status +ohci_device_ctrl_transfer(usbd_xfer_handle xfer) +{ + usbd_status err; + + /* Insert last in queue. */ + err = usb_insert_transfer(xfer); + if (err) + return (err); + + /* Pipe isn't running, start first */ + return (ohci_device_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); +} + +Static usbd_status +ohci_device_ctrl_start(usbd_xfer_handle xfer) +{ + ohci_softc_t *sc = (ohci_softc_t *)xfer->pipe->device->bus; + usbd_status err; + + if (sc->sc_dying) + return (USBD_IOERROR); + +#ifdef DIAGNOSTIC + if (!(xfer->rqflags & URQ_REQUEST)) { + /* XXX panic */ + printf("ohci_device_ctrl_transfer: not a request\n"); + return (USBD_INVAL); + } +#endif + + err = ohci_device_request(xfer); + if (err) + return (err); + + if (sc->sc_bus.use_polling) + ohci_waitintr(sc, xfer); + return (USBD_IN_PROGRESS); +} + +/* Abort a device control request. */ +Static void +ohci_device_ctrl_abort(usbd_xfer_handle xfer) +{ + DPRINTF(("ohci_device_ctrl_abort: xfer=%p\n", xfer)); + ohci_abort_xfer(xfer, USBD_CANCELLED); +} + +/* Close a device control pipe. */ +Static void +ohci_device_ctrl_close(usbd_pipe_handle pipe) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; + ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; + + DPRINTF(("ohci_device_ctrl_close: pipe=%p\n", pipe)); + ohci_close_pipe(pipe, sc->sc_ctrl_head); + ohci_free_std(sc, opipe->tail.td); +} + +/************************/ + +Static void +ohci_device_clear_toggle(usbd_pipe_handle pipe) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; + + opipe->sed->ed.ed_headp &= htole32(~OHCI_TOGGLECARRY); +} + +Static void +ohci_noop(usbd_pipe_handle pipe) +{ +} + +Static usbd_status +ohci_device_bulk_transfer(usbd_xfer_handle xfer) +{ + usbd_status err; + + /* Insert last in queue. */ + err = usb_insert_transfer(xfer); + if (err) + return (err); + + /* Pipe isn't running, start first */ + return (ohci_device_bulk_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); +} + +Static usbd_status +ohci_device_bulk_start(usbd_xfer_handle xfer) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; + usbd_device_handle dev = opipe->pipe.device; + ohci_softc_t *sc = (ohci_softc_t *)dev->bus; + int addr = dev->address; + ohci_soft_td_t *data, *tail, *tdp; + ohci_soft_ed_t *sed; + int s, len, isread, endpt; + usbd_status err; + + if (sc->sc_dying) + return (USBD_IOERROR); + +#ifdef DIAGNOSTIC + if (xfer->rqflags & URQ_REQUEST) { + /* XXX panic */ + printf("ohci_device_bulk_start: a request\n"); + return (USBD_INVAL); + } +#endif + + len = xfer->length; + endpt = xfer->pipe->endpoint->edesc->bEndpointAddress; + isread = UE_GET_DIR(endpt) == UE_DIR_IN; + sed = opipe->sed; + + DPRINTFN(4,("ohci_device_bulk_start: xfer=%p len=%d isread=%d " + "flags=%d endpt=%d\n", xfer, len, isread, xfer->flags, + endpt)); + + opipe->u.bulk.isread = isread; + opipe->u.bulk.length = len; + + /* Update device address */ + sed->ed.ed_flags = htole32( + (le32toh(sed->ed.ed_flags) & ~OHCI_ED_ADDRMASK) | + OHCI_ED_SET_FA(addr)); + + /* Allocate a chain of new TDs (including a new tail). */ + data = opipe->tail.td; + err = ohci_alloc_std_chain(opipe, sc, len, isread, xfer, + data, &tail); + if (err) + return (err); + + tail->xfer = NULL; + xfer->hcpriv = data; + + DPRINTFN(4,("ohci_device_bulk_start: ed_flags=0x%08x td_flags=0x%08x " + "td_cbp=0x%08x td_be=0x%08x\n", + (int)le32toh(sed->ed.ed_flags), + (int)le32toh(data->td.td_flags), + (int)le32toh(data->td.td_cbp), + (int)le32toh(data->td.td_be))); + +#ifdef USB_DEBUG + if (ohcidebug > 5) { + ohci_dump_ed(sed); + ohci_dump_tds(data); + } +#endif + + /* Insert ED in schedule */ + s = splusb(); + for (tdp = data; tdp != tail; tdp = tdp->nexttd) { + tdp->xfer = xfer; + } + sed->ed.ed_tailp = htole32(tail->physaddr); + opipe->tail.td = tail; + sed->ed.ed_flags &= htole32(~OHCI_ED_SKIP); + OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_BLF); + if (xfer->timeout && !sc->sc_bus.use_polling) { + usb_callout(xfer->timeout_handle, MS_TO_TICKS(xfer->timeout), + ohci_timeout, xfer); + } + +#if 0 +/* This goes wrong if we are too slow. */ + if (ohcidebug > 10) { + delay(10000); + DPRINTF(("ohci_device_intr_transfer: status=%x\n", + OREAD4(sc, OHCI_COMMAND_STATUS))); + ohci_dump_ed(sed); + ohci_dump_tds(data); + } +#endif + + splx(s); + + return (USBD_IN_PROGRESS); +} + +Static void +ohci_device_bulk_abort(usbd_xfer_handle xfer) +{ + DPRINTF(("ohci_device_bulk_abort: xfer=%p\n", xfer)); + ohci_abort_xfer(xfer, USBD_CANCELLED); +} + +/* + * Close a device bulk pipe. + */ +Static void +ohci_device_bulk_close(usbd_pipe_handle pipe) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; + ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; + + DPRINTF(("ohci_device_bulk_close: pipe=%p\n", pipe)); + ohci_close_pipe(pipe, sc->sc_bulk_head); + ohci_free_std(sc, opipe->tail.td); +} + +/************************/ + +Static usbd_status +ohci_device_intr_transfer(usbd_xfer_handle xfer) +{ + usbd_status err; + + /* Insert last in queue. */ + err = usb_insert_transfer(xfer); + if (err) + return (err); + + /* Pipe isn't running, start first */ + return (ohci_device_intr_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); +} + +Static usbd_status +ohci_device_intr_start(usbd_xfer_handle xfer) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; + usbd_device_handle dev = opipe->pipe.device; + ohci_softc_t *sc = (ohci_softc_t *)dev->bus; + ohci_soft_ed_t *sed = opipe->sed; + ohci_soft_td_t *data, *tail; + int len; + int s; + + if (sc->sc_dying) + return (USBD_IOERROR); + + DPRINTFN(3, ("ohci_device_intr_transfer: xfer=%p len=%d " + "flags=%d priv=%p\n", + xfer, xfer->length, xfer->flags, xfer->priv)); + +#ifdef DIAGNOSTIC + if (xfer->rqflags & URQ_REQUEST) + panic("ohci_device_intr_transfer: a request\n"); +#endif + + len = xfer->length; + + data = opipe->tail.td; + tail = ohci_alloc_std(sc); + if (tail == NULL) + return (USBD_NOMEM); + tail->xfer = NULL; + + data->td.td_flags = htole32( + OHCI_TD_IN | OHCI_TD_NOCC | + OHCI_TD_SET_DI(1) | OHCI_TD_TOGGLE_CARRY); + if (xfer->flags & USBD_SHORT_XFER_OK) + data->td.td_flags |= htole32(OHCI_TD_R); + data->td.td_cbp = htole32(DMAADDR(&xfer->dmabuf, 0)); + data->nexttd = tail; + data->td.td_nexttd = htole32(tail->physaddr); + data->td.td_be = htole32(le32toh(data->td.td_cbp) + len - 1); + data->len = len; + data->xfer = xfer; + data->flags = OHCI_CALL_DONE | OHCI_ADD_LEN; + xfer->hcpriv = data; + +#ifdef USB_DEBUG + if (ohcidebug > 5) { + DPRINTF(("ohci_device_intr_transfer:\n")); + ohci_dump_ed(sed); + ohci_dump_tds(data); + } +#endif + + /* Insert ED in schedule */ + s = splusb(); + sed->ed.ed_tailp = htole32(tail->physaddr); + opipe->tail.td = tail; + sed->ed.ed_flags &= htole32(~OHCI_ED_SKIP); + +#if 0 +/* + * This goes horribly wrong, printing thousands of descriptors, + * because false references are followed due to the fact that the + * TD is gone. + */ + if (ohcidebug > 5) { + usb_delay_ms(&sc->sc_bus, 5); + DPRINTF(("ohci_device_intr_transfer: status=%x\n", + OREAD4(sc, OHCI_COMMAND_STATUS))); + ohci_dump_ed(sed); + ohci_dump_tds(data); + } +#endif + splx(s); + + return (USBD_IN_PROGRESS); +} + +/* Abort a device control request. */ +Static void +ohci_device_intr_abort(usbd_xfer_handle xfer) +{ + if (xfer->pipe->intrxfer == xfer) { + DPRINTF(("ohci_device_intr_abort: remove\n")); + xfer->pipe->intrxfer = NULL; + } + ohci_abort_xfer(xfer, USBD_CANCELLED); +} + +/* Close a device interrupt pipe. */ +Static void +ohci_device_intr_close(usbd_pipe_handle pipe) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; + ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; + int nslots = opipe->u.intr.nslots; + int pos = opipe->u.intr.pos; + int j; + ohci_soft_ed_t *p, *sed = opipe->sed; + int s; + + DPRINTFN(1,("ohci_device_intr_close: pipe=%p nslots=%d pos=%d\n", + pipe, nslots, pos)); + s = splusb(); + sed->ed.ed_flags |= htole32(OHCI_ED_SKIP); + if ((le32toh(sed->ed.ed_tailp) & OHCI_HEADMASK) != + (le32toh(sed->ed.ed_headp) & OHCI_HEADMASK)) + usb_delay_ms(&sc->sc_bus, 2); +#ifdef DIAGNOSTIC + if ((le32toh(sed->ed.ed_tailp) & OHCI_HEADMASK) != + (le32toh(sed->ed.ed_headp) & OHCI_HEADMASK)) + panic("%s: Intr pipe %p still has TDs queued\n", + USBDEVNAME(sc->sc_bus.bdev), pipe); +#endif + + for (p = sc->sc_eds[pos]; p && p->next != sed; p = p->next) + ; +#ifdef DIAGNOSTIC + if (p == NULL) + panic("ohci_device_intr_close: ED not found\n"); +#endif + p->next = sed->next; + p->ed.ed_nexted = sed->ed.ed_nexted; + splx(s); + + for (j = 0; j < nslots; j++) + --sc->sc_bws[(pos * nslots + j) % OHCI_NO_INTRS]; + + ohci_free_std(sc, opipe->tail.td); + ohci_free_sed(sc, opipe->sed); +} + +Static usbd_status +ohci_device_setintr(ohci_softc_t *sc, struct ohci_pipe *opipe, int ival) +{ + int i, j, s, best; + u_int npoll, slow, shigh, nslots; + u_int bestbw, bw; + ohci_soft_ed_t *hsed, *sed = opipe->sed; + + DPRINTFN(2, ("ohci_setintr: pipe=%p\n", opipe)); + if (ival == 0) { + printf("ohci_setintr: 0 interval\n"); + return (USBD_INVAL); + } + + npoll = OHCI_NO_INTRS; + while (npoll > ival) + npoll /= 2; + DPRINTFN(2, ("ohci_setintr: ival=%d npoll=%d\n", ival, npoll)); + + /* + * We now know which level in the tree the ED must go into. + * Figure out which slot has most bandwidth left over. + * Slots to examine: + * npoll + * 1 0 + * 2 1 2 + * 4 3 4 5 6 + * 8 7 8 9 10 11 12 13 14 + * N (N-1) .. (N-1+N-1) + */ + slow = npoll-1; + shigh = slow + npoll; + nslots = OHCI_NO_INTRS / npoll; + for (best = i = slow, bestbw = ~0; i < shigh; i++) { + bw = 0; + for (j = 0; j < nslots; j++) + bw += sc->sc_bws[(i * nslots + j) % OHCI_NO_INTRS]; + if (bw < bestbw) { + best = i; + bestbw = bw; + } + } + DPRINTFN(2, ("ohci_setintr: best=%d(%d..%d) bestbw=%d\n", + best, slow, shigh, bestbw)); + + s = splusb(); + hsed = sc->sc_eds[best]; + sed->next = hsed->next; + sed->ed.ed_nexted = hsed->ed.ed_nexted; + hsed->next = sed; + hsed->ed.ed_nexted = htole32(sed->physaddr); + splx(s); + + for (j = 0; j < nslots; j++) + ++sc->sc_bws[(best * nslots + j) % OHCI_NO_INTRS]; + opipe->u.intr.nslots = nslots; + opipe->u.intr.pos = best; + + DPRINTFN(5, ("ohci_setintr: returns %p\n", opipe)); + return (USBD_NORMAL_COMPLETION); +} + +/***********************/ + +usbd_status +ohci_device_isoc_transfer(usbd_xfer_handle xfer) +{ + usbd_status err; + + DPRINTFN(5,("ohci_device_isoc_transfer: xfer=%p\n", xfer)); + + /* Put it on our queue, */ + err = usb_insert_transfer(xfer); + + /* bail out on error, */ + if (err && err != USBD_IN_PROGRESS) + return (err); + + /* XXX should check inuse here */ + + /* insert into schedule, */ + ohci_device_isoc_enter(xfer); + + /* and start if the pipe wasn't running */ + if (!err) + ohci_device_isoc_start(SIMPLEQ_FIRST(&xfer->pipe->queue)); + + return (err); +} + +void +ohci_device_isoc_enter(usbd_xfer_handle xfer) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; + usbd_device_handle dev = opipe->pipe.device; + ohci_softc_t *sc = (ohci_softc_t *)dev->bus; + ohci_soft_ed_t *sed = opipe->sed; + struct iso *iso = &opipe->u.iso; + ohci_soft_itd_t *sitd, *nsitd; + ohci_physaddr_t buf, offs, noffs, bp0; + int i, ncur, nframes; + int s; + + DPRINTFN(1,("ohci_device_isoc_enter: used=%d next=%d xfer=%p " + "nframes=%d\n", + iso->inuse, iso->next, xfer, xfer->nframes)); + + if (sc->sc_dying) + return; + + if (iso->next == -1) { + /* Not in use yet, schedule it a few frames ahead. */ + iso->next = le32toh(sc->sc_hcca->hcca_frame_number) + 5; + DPRINTFN(2,("ohci_device_isoc_enter: start next=%d\n", + iso->next)); + } + + sitd = opipe->tail.itd; + buf = DMAADDR(&xfer->dmabuf, 0); + bp0 = OHCI_PAGE(buf); + offs = OHCI_PAGE_OFFSET(buf); + nframes = xfer->nframes; + xfer->hcpriv = sitd; + for (i = ncur = 0; i < nframes; i++, ncur++) { + noffs = offs + xfer->frlengths[i]; + if (ncur == OHCI_ITD_NOFFSET || /* all offsets used */ + OHCI_PAGE(buf + noffs) > bp0 + OHCI_PAGE_SIZE) { /* too many page crossings */ + + /* Allocate next ITD */ + nsitd = ohci_alloc_sitd(sc); + if (nsitd == NULL) { + /* XXX what now? */ + printf("%s: isoc TD alloc failed\n", + USBDEVNAME(sc->sc_bus.bdev)); + return; + } + + /* Fill current ITD */ + sitd->itd.itd_flags = htole32( + OHCI_ITD_NOCC | + OHCI_ITD_SET_SF(iso->next) | + OHCI_ITD_SET_DI(6) | /* delay intr a little */ + OHCI_ITD_SET_FC(ncur)); + sitd->itd.itd_bp0 = htole32(bp0); + sitd->nextitd = nsitd; + sitd->itd.itd_nextitd = htole32(nsitd->physaddr); + sitd->itd.itd_be = htole32(bp0 + offs - 1); + sitd->xfer = xfer; + sitd->flags = 0; + + sitd = nsitd; + iso->next = iso->next + ncur; + bp0 = OHCI_PAGE(buf + offs); + ncur = 0; + } + sitd->itd.itd_offset[ncur] = htole16(OHCI_ITD_MK_OFFS(offs)); + offs = noffs; + } + nsitd = ohci_alloc_sitd(sc); + if (nsitd == NULL) { + /* XXX what now? */ + printf("%s: isoc TD alloc failed\n", + USBDEVNAME(sc->sc_bus.bdev)); + return; + } + /* Fixup last used ITD */ + sitd->itd.itd_flags = htole32( + OHCI_ITD_NOCC | + OHCI_ITD_SET_SF(iso->next) | + OHCI_ITD_SET_DI(0) | + OHCI_ITD_SET_FC(ncur)); + sitd->itd.itd_bp0 = htole32(bp0); + sitd->nextitd = nsitd; + sitd->itd.itd_nextitd = htole32(nsitd->physaddr); + sitd->itd.itd_be = htole32(bp0 + offs - 1); + sitd->xfer = xfer; + sitd->flags = OHCI_CALL_DONE; + + iso->next = iso->next + ncur; + iso->inuse += nframes; + + xfer->actlen = offs; /* XXX pretend we did it all */ + + xfer->status = USBD_IN_PROGRESS; + +#ifdef USB_DEBUG + if (ohcidebug > 5) { + DPRINTF(("ohci_device_isoc_enter: frame=%d\n", + le32toh(sc->sc_hcca->hcca_frame_number))); + ohci_dump_itds(xfer->hcpriv); + ohci_dump_ed(sed); + } +#endif + + s = splusb(); + opipe->tail.itd = nsitd; + sed->ed.ed_tailp = htole32(nsitd->physaddr); + splx(s); + +#ifdef USB_DEBUG + if (ohcidebug > 5) { + delay(150000); + DPRINTF(("ohci_device_isoc_enter: after frame=%d\n", + le32toh(sc->sc_hcca->hcca_frame_number))); + ohci_dump_itds(xfer->hcpriv); + ohci_dump_ed(sed); + } +#endif +} + +usbd_status +ohci_device_isoc_start(usbd_xfer_handle xfer) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; + ohci_softc_t *sc = (ohci_softc_t *)opipe->pipe.device->bus; + + DPRINTFN(5,("ohci_device_isoc_start: xfer=%p\n", xfer)); + + if (sc->sc_dying) + return (USBD_IOERROR); + +#ifdef DIAGNOSTIC + if (xfer->status != USBD_IN_PROGRESS) + printf("ohci_device_isoc_start: not in progress %p\n", xfer); +#endif + + /* XXX anything to do? */ + + return (USBD_IN_PROGRESS); +} + +void +ohci_device_isoc_abort(usbd_xfer_handle xfer) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; + ohci_softc_t *sc = (ohci_softc_t *)opipe->pipe.device->bus; + ohci_soft_ed_t *sed; + ohci_soft_itd_t *sitd; + int s; + + s = splusb(); + + DPRINTFN(1,("ohci_device_isoc_abort: xfer=%p\n", xfer)); + + /* Transfer is already done. */ + if (xfer->status != USBD_NOT_STARTED && + xfer->status != USBD_IN_PROGRESS) { + splx(s); + printf("ohci_device_isoc_abort: early return\n"); + return; + } + + /* Give xfer the requested abort code. */ + xfer->status = USBD_CANCELLED; + + sed = opipe->sed; + sed->ed.ed_flags |= htole32(OHCI_ED_SKIP); /* force hardware skip */ + + sitd = xfer->hcpriv; +#ifdef DIAGNOSTIC + if (sitd == NULL) { + splx(s); + printf("ohci_device_isoc_abort: hcpriv==0\n"); + return; + } +#endif + for (; sitd->xfer == xfer; sitd = sitd->nextitd) { +#ifdef DIAGNOSTIC + DPRINTFN(1,("abort sets done sitd=%p\n", sitd)); + sitd->isdone = 1; +#endif + } + + splx(s); + + usb_delay_ms(&sc->sc_bus, OHCI_ITD_NOFFSET); + + s = splusb(); + + /* Run callback. */ + usb_transfer_complete(xfer); + + sed->ed.ed_headp = htole32(sitd->physaddr); /* unlink TDs */ + sed->ed.ed_flags &= htole32(~OHCI_ED_SKIP); /* remove hardware skip */ + + splx(s); +} + +void +ohci_device_isoc_done(usbd_xfer_handle xfer) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; + ohci_softc_t *sc = (ohci_softc_t *)opipe->pipe.device->bus; + ohci_soft_itd_t *sitd, *nsitd; + + DPRINTFN(1,("ohci_device_isoc_done: xfer=%p\n", xfer)); + + for (sitd = xfer->hcpriv; + !(sitd->flags & OHCI_CALL_DONE); + sitd = nsitd) { + nsitd = sitd->nextitd; + DPRINTFN(1,("ohci_device_isoc_done: free sitd=%p\n", sitd)); + ohci_free_sitd(sc, sitd); + } + ohci_free_sitd(sc, sitd); + xfer->hcpriv = NULL; +} + +usbd_status +ohci_setup_isoc(usbd_pipe_handle pipe) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; + ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; + struct iso *iso = &opipe->u.iso; + int s; + + iso->next = -1; + iso->inuse = 0; + + s = splusb(); + ohci_add_ed(opipe->sed, sc->sc_isoc_head); + splx(s); + + return (USBD_NORMAL_COMPLETION); +} + +void +ohci_device_isoc_close(usbd_pipe_handle pipe) +{ + struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; + ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus; + + DPRINTF(("ohci_device_isoc_close: pipe=%p\n", pipe)); + ohci_close_pipe(pipe, sc->sc_isoc_head); +#ifdef DIAGNOSTIC + opipe->tail.itd->isdone = 1; +#endif + ohci_free_sitd(sc, opipe->tail.itd); +} |
