diff options
Diffstat (limited to 'sys/dev/usb/controller/ehcireg.h')
| -rw-r--r-- | sys/dev/usb/controller/ehcireg.h | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/sys/dev/usb/controller/ehcireg.h b/sys/dev/usb/controller/ehcireg.h new file mode 100644 index 0000000..182d9d6 --- /dev/null +++ b/sys/dev/usb/controller/ehcireg.h @@ -0,0 +1,174 @@ +/* $FreeBSD$ */ +/*- + * Copyright (c) 2001 The NetBSD Foundation, Inc. + * All rights reserved. + * + * This code is derived from software contributed to The NetBSD Foundation + * by Lennart Augustsson (lennart@augustsson.net). + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the NetBSD + * Foundation, Inc. and its contributors. + * 4. Neither the name of The NetBSD Foundation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _EHCIREG_H_ +#define _EHCIREG_H_ + +/* PCI config registers */ +#define PCI_CBMEM 0x10 /* configuration base MEM */ +#define PCI_INTERFACE_EHCI 0x20 +#define PCI_USBREV 0x60 /* RO USB protocol revision */ +#define PCI_USB_REV_MASK 0xff +#define PCI_USB_REV_PRE_1_0 0x00 +#define PCI_USB_REV_1_0 0x10 +#define PCI_USB_REV_1_1 0x11 +#define PCI_USB_REV_2_0 0x20 +#define PCI_EHCI_FLADJ 0x61 /* RW Frame len adj, SOF=59488+6*fladj */ +#define PCI_EHCI_PORTWAKECAP 0x62 /* RW Port wake caps (opt) */ + +/* EHCI Extended Capabilities */ +#define EHCI_EC_LEGSUP 0x01 +#define EHCI_EECP_NEXT(x) (((x) >> 8) & 0xff) +#define EHCI_EECP_ID(x) ((x) & 0xff) + +/* Legacy support extended capability */ +#define EHCI_LEGSUP_BIOS_SEM 0x02 +#define EHCI_LEGSUP_OS_SEM 0x03 +#define EHCI_LEGSUP_USBLEGCTLSTS 0x04 + +/* EHCI capability registers */ +#define EHCI_CAPLENGTH 0x00 /* RO Capability register length field */ +/* reserved 0x01 */ +#define EHCI_HCIVERSION 0x02 /* RO Interface version number */ +#define EHCI_HCSPARAMS 0x04 /* RO Structural parameters */ +#define EHCI_HCS_DEBUGPORT(x) (((x) >> 20) & 0xf) +#define EHCI_HCS_P_INDICATOR(x) ((x) & 0x10000) +#define EHCI_HCS_N_CC(x) (((x) >> 12) & 0xf) /* # of companion ctlrs */ +#define EHCI_HCS_N_PCC(x) (((x) >> 8) & 0xf) /* # of ports per comp. */ +#define EHCI_HCS_PPC(x) ((x) & 0x10) /* port power control */ +#define EHCI_HCS_N_PORTS(x) ((x) & 0xf) /* # of ports */ +#define EHCI_HCCPARAMS 0x08 /* RO Capability parameters */ +#define EHCI_HCC_EECP(x) (((x) >> 8) & 0xff) /* extended ports caps */ +#define EHCI_HCC_IST(x) (((x) >> 4) & 0xf) /* isoc sched threshold */ +#define EHCI_HCC_ASPC(x) ((x) & 0x4) /* async sched park cap */ +#define EHCI_HCC_PFLF(x) ((x) & 0x2) /* prog frame list flag */ +#define EHCI_HCC_64BIT(x) ((x) & 0x1) /* 64 bit address cap */ +#define EHCI_HCSP_PORTROUTE 0x0c /* RO Companion port route description */ + +/* EHCI operational registers. Offset given by EHCI_CAPLENGTH register */ +#define EHCI_USBCMD 0x00 /* RO, RW, WO Command register */ +#define EHCI_CMD_ITC_M 0x00ff0000 /* RW interrupt threshold ctrl */ +#define EHCI_CMD_ITC_1 0x00010000 +#define EHCI_CMD_ITC_2 0x00020000 +#define EHCI_CMD_ITC_4 0x00040000 +#define EHCI_CMD_ITC_8 0x00080000 +#define EHCI_CMD_ITC_16 0x00100000 +#define EHCI_CMD_ITC_32 0x00200000 +#define EHCI_CMD_ITC_64 0x00400000 +#define EHCI_CMD_ASPME 0x00000800 /* RW/RO async park enable */ +#define EHCI_CMD_ASPMC 0x00000300 /* RW/RO async park count */ +#define EHCI_CMD_LHCR 0x00000080 /* RW light host ctrl reset */ +#define EHCI_CMD_IAAD 0x00000040 /* RW intr on async adv door + * bell */ +#define EHCI_CMD_ASE 0x00000020 /* RW async sched enable */ +#define EHCI_CMD_PSE 0x00000010 /* RW periodic sched enable */ +#define EHCI_CMD_FLS_M 0x0000000c /* RW/RO frame list size */ +#define EHCI_CMD_FLS(x) (((x) >> 2) & 3) /* RW/RO frame list size */ +#define EHCI_CMD_HCRESET 0x00000002 /* RW reset */ +#define EHCI_CMD_RS 0x00000001 /* RW run/stop */ +#define EHCI_USBSTS 0x04 /* RO, RW, RWC Status register */ +#define EHCI_STS_ASS 0x00008000 /* RO async sched status */ +#define EHCI_STS_PSS 0x00004000 /* RO periodic sched status */ +#define EHCI_STS_REC 0x00002000 /* RO reclamation */ +#define EHCI_STS_HCH 0x00001000 /* RO host controller halted */ +#define EHCI_STS_IAA 0x00000020 /* RWC interrupt on async adv */ +#define EHCI_STS_HSE 0x00000010 /* RWC host system error */ +#define EHCI_STS_FLR 0x00000008 /* RWC frame list rollover */ +#define EHCI_STS_PCD 0x00000004 /* RWC port change detect */ +#define EHCI_STS_ERRINT 0x00000002 /* RWC error interrupt */ +#define EHCI_STS_INT 0x00000001 /* RWC interrupt */ +#define EHCI_STS_INTRS(x) ((x) & 0x3f) + +/* + * NOTE: the doorbell interrupt is enabled, but the doorbell is never + * used! SiS chipsets require this. + */ +#define EHCI_NORMAL_INTRS (EHCI_STS_IAA | EHCI_STS_HSE | \ + EHCI_STS_PCD | EHCI_STS_ERRINT | EHCI_STS_INT) + +#define EHCI_USBINTR 0x08 /* RW Interrupt register */ +#define EHCI_INTR_IAAE 0x00000020 /* interrupt on async advance + * ena */ +#define EHCI_INTR_HSEE 0x00000010 /* host system error ena */ +#define EHCI_INTR_FLRE 0x00000008 /* frame list rollover ena */ +#define EHCI_INTR_PCIE 0x00000004 /* port change ena */ +#define EHCI_INTR_UEIE 0x00000002 /* USB error intr ena */ +#define EHCI_INTR_UIE 0x00000001 /* USB intr ena */ + +#define EHCI_FRINDEX 0x0c /* RW Frame Index register */ + +#define EHCI_CTRLDSSEGMENT 0x10 /* RW Control Data Structure Segment */ + +#define EHCI_PERIODICLISTBASE 0x14 /* RW Periodic List Base */ +#define EHCI_ASYNCLISTADDR 0x18 /* RW Async List Base */ + +#define EHCI_CONFIGFLAG 0x40 /* RW Configure Flag register */ +#define EHCI_CONF_CF 0x00000001 /* RW configure flag */ + +#define EHCI_PORTSC(n) (0x40+(4*(n))) /* RO, RW, RWC Port Status reg */ +#define EHCI_PS_WKOC_E 0x00400000 /* RW wake on over current ena */ +#define EHCI_PS_WKDSCNNT_E 0x00200000 /* RW wake on disconnect ena */ +#define EHCI_PS_WKCNNT_E 0x00100000 /* RW wake on connect ena */ +#define EHCI_PS_PTC 0x000f0000 /* RW port test control */ +#define EHCI_PS_PIC 0x0000c000 /* RW port indicator control */ +#define EHCI_PS_PO 0x00002000 /* RW port owner */ +#define EHCI_PS_PP 0x00001000 /* RW,RO port power */ +#define EHCI_PS_LS 0x00000c00 /* RO line status */ +#define EHCI_PS_IS_LOWSPEED(x) (((x) & EHCI_PS_LS) == 0x00000400) +#define EHCI_PS_PR 0x00000100 /* RW port reset */ +#define EHCI_PS_SUSP 0x00000080 /* RW suspend */ +#define EHCI_PS_FPR 0x00000040 /* RW force port resume */ +#define EHCI_PS_OCC 0x00000020 /* RWC over current change */ +#define EHCI_PS_OCA 0x00000010 /* RO over current active */ +#define EHCI_PS_PEC 0x00000008 /* RWC port enable change */ +#define EHCI_PS_PE 0x00000004 /* RW port enable */ +#define EHCI_PS_CSC 0x00000002 /* RWC connect status change */ +#define EHCI_PS_CS 0x00000001 /* RO connect status */ +#define EHCI_PS_CLEAR (EHCI_PS_OCC | EHCI_PS_PEC | EHCI_PS_CSC) + +#define EHCI_USBMODE 0x68 /* RW USB Device mode register */ +#define EHCI_UM_CM 0x00000003 /* R/WO Controller Mode */ +#define EHCI_UM_CM_IDLE 0x0 /* Idle */ +#define EHCI_UM_CM_HOST 0x3 /* Host Controller */ +#define EHCI_UM_ES 0x00000004 /* R/WO Endian Select */ +#define EHCI_UM_ES_LE 0x0 /* Little-endian byte alignment */ +#define EHCI_UM_ES_BE 0x4 /* Big-endian byte alignment */ +#define EHCI_UM_SDIS 0x00000010 /* R/WO Stream Disable Mode */ + +#define EHCI_PORT_RESET_COMPLETE 2 /* ms */ + +#endif /* _EHCIREG_H_ */ |
