diff options
Diffstat (limited to 'sys/dev/ti/if_tireg.h')
| -rw-r--r-- | sys/dev/ti/if_tireg.h | 1067 |
1 files changed, 1067 insertions, 0 deletions
diff --git a/sys/dev/ti/if_tireg.h b/sys/dev/ti/if_tireg.h new file mode 100644 index 0000000..b15b28b --- /dev/null +++ b/sys/dev/ti/if_tireg.h @@ -0,0 +1,1067 @@ +/* + * Copyright (c) 1997, 1998, 1999 + * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD$ + */ + +/* + * Tigon register offsets. These are memory mapped registers + * which can be accessed with the CSR_READ_4()/CSR_WRITE_4() macros. + * Each register must be accessed using 32 bit operations. + * + * All reegisters are accessed through a 16K shared memory block. + * The first group of registers are actually copies of the PCI + * configuration space registers. + */ + +#define TI_PCI_ID 0x000 /* PCI device/vendor ID */ +#define TI_PCI_CMDSTAT 0x004 +#define TI_PCI_CLASSCODE 0x008 +#define TI_PCI_BIST 0x00C +#define TI_PCI_LOMEM 0x010 /* Shared memory base address */ +#define TI_PCI_SUBSYS 0x02C +#define TI_PCI_ROMBASE 0x030 +#define TI_PCI_INT 0x03C + +#ifndef PCIM_CMD_MWIEN +#define PCIM_CMD_MWIEN 0x0010 +#endif + +/* + * Alteon AceNIC PCI vendor/device ID. + */ +#define ALT_VENDORID 0x12AE +#define ALT_DEVICEID_ACENIC 0x0001 +#define ALT_DEVICEID_ACENIC_COPPER 0x0002 + +/* + * 3Com 3c985 PCI vendor/device ID. + */ +#define TC_VENDORID 0x10B7 +#define TC_DEVICEID_3C985 0x0001 + +/* + * Netgear GA620 PCI vendor/device ID. + */ +#define NG_VENDORID 0x1385 +#define NG_DEVICEID_GA620 0x620A +#define NG_DEVICEID_GA620T 0x630A + +/* + * SGI device/vendor ID. + */ +#define SGI_VENDORID 0x10A9 +#define SGI_DEVICEID_TIGON 0x0009 + +/* + * DEC vendor ID, Farallon device ID. Apparently, Farallon used + * the DEC vendor ID in their cards by mistake. + */ +#define DEC_VENDORID 0x1011 +#define DEC_DEVICEID_FARALLON_PN9000SX 0x001a + +/* + * Tigon configuration and control registers. + */ +#define TI_MISC_HOST_CTL 0x040 +#define TI_MISC_LOCAL_CTL 0x044 +#define TI_SEM_AB 0x048 /* Tigon 2 only */ +#define TI_MISC_CONF 0x050 /* Tigon 2 only */ +#define TI_TIMER_BITS 0x054 +#define TI_TIMERREF 0x058 +#define TI_PCI_STATE 0x05C +#define TI_MAIN_EVENT_A 0x060 +#define TI_MAILBOX_EVENT_A 0x064 +#define TI_WINBASE 0x068 +#define TI_WINDATA 0x06C +#define TI_MAIN_EVENT_B 0x070 /* Tigon 2 only */ +#define TI_MAILBOX_EVENT_B 0x074 /* Tigon 2 only */ +#define TI_TIMERREF_B 0x078 /* Tigon 2 only */ +#define TI_SERIAL 0x07C + +/* + * Misc host control bits. + */ +#define TI_MHC_INTSTATE 0x00000001 +#define TI_MHC_CLEARINT 0x00000002 +#define TI_MHC_RESET 0x00000008 +#define TI_MHC_BYTE_SWAP_ENB 0x00000010 +#define TI_MHC_WORD_SWAP_ENB 0x00000020 +#define TI_MHC_MASK_INTS 0x00000040 +#define TI_MHC_CHIP_REV_MASK 0xF0000000 + +#define TI_MHC_BIGENDIAN_INIT \ + (TI_MHC_BYTE_SWAP_ENB|TI_MHC_WORD_SWAP_ENB|TI_MHC_CLEARINT) + +#define TI_MHC_LITTLEENDIAN_INIT \ + (TI_MHC_WORD_SWAP_ENB|TI_MHC_CLEARINT) + +/* + * Tigon chip rev values. Rev 4 is the Tigon 1. Rev 6 is the Tigon 2. + * Rev 5 is also the Tigon 2, but is a broken version which was never + * used in any actual hardware, so we ignore it. + */ +#define TI_REV_TIGON_I 0x40000000 +#define TI_REV_TIGON_II 0x60000000 + +/* + * Firmware revision that we want. + */ +#define TI_FIRMWARE_MAJOR 0xc +#define TI_FIRMWARE_MINOR 0x4 +#define TI_FIRMWARE_FIX 0xb + +/* + * Miscelaneous Local Control register. + */ +#define TI_MLC_EE_WRITE_ENB 0x00000010 +#define TI_MLC_SRAM_BANK_SIZE 0x00000300 /* Tigon 2 only */ +#define TI_MLC_LOCALADDR_21 0x00004000 +#define TI_MLC_LOCALADDR_22 0x00008000 +#define TI_MLC_SBUS_WRITEERR 0x00080000 +#define TI_MLC_EE_CLK 0x00100000 +#define TI_MLC_EE_TXEN 0x00200000 +#define TI_MLC_EE_DOUT 0x00400000 +#define TI_MLC_EE_DIN 0x00800000 + +/* Possible memory sizes. */ +#define TI_MLC_SRAM_BANK_DISA 0x00000000 +#define TI_MLC_SRAM_BANK_1024K 0x00000100 +#define TI_MLC_SRAM_BANK_512K 0x00000200 +#define TI_MLC_SRAM_BANK_256K 0x00000300 + +/* + * Offset of MAC address inside EEPROM. + */ +#define TI_EE_MAC_OFFSET 0x8c + +#define TI_DMA_ASSIST 0x11C +#define TI_CPU_STATE 0x140 +#define TI_CPU_PROGRAM_COUNTER 0x144 +#define TI_SRAM_ADDR 0x154 +#define TI_SRAM_DATA 0x158 +#define TI_GEN_0 0x180 +#define TI_GEN_X 0x1FC +#define TI_MAC_TX_STATE 0x200 +#define TI_MAC_RX_STATE 0x220 +#define TI_CPU_CTL_B 0x240 /* Tigon 2 only */ +#define TI_CPU_PROGRAM_COUNTER_B 0x244 /* Tigon 2 only */ +#define TI_SRAM_ADDR_B 0x254 /* Tigon 2 only */ +#define TI_SRAM_DATA_B 0x258 /* Tigon 2 only */ +#define TI_GEN_B_0 0x280 /* Tigon 2 only */ +#define TI_GEN_B_X 0x2FC /* Tigon 2 only */ + +/* + * Misc config register. + */ +#define TI_MCR_SRAM_SYNCHRONOUS 0x00100000 /* Tigon 2 only */ + +/* + * PCI state register. + */ +#define TI_PCISTATE_FORCE_RESET 0x00000001 +#define TI_PCISTATE_PROVIDE_LEN 0x00000002 +#define TI_PCISTATE_READ_MAXDMA 0x0000001C +#define TI_PCISTATE_WRITE_MAXDMA 0x000000E0 +#define TI_PCISTATE_MINDMA 0x0000FF00 +#define TI_PCISTATE_FIFO_RETRY_ENB 0x00010000 +#define TI_PCISTATE_USE_MEM_RD_MULT 0x00020000 +#define TI_PCISTATE_NO_SWAP_READ_DMA 0x00040000 +#define TI_PCISTATE_NO_SWAP_WRITE_DMA 0x00080000 +#define TI_PCISTATE_66MHZ_BUS 0x00080000 /* Tigon 2 only */ +#define TI_PCISTATE_32BIT_BUS 0x00100000 /* Tigon 2 only */ +#define TI_PCISTATE_ENB_BYTE_ENABLES 0x00800000 /* Tigon 2 only */ +#define TI_PCISTATE_READ_CMD 0x0F000000 +#define TI_PCISTATE_WRITE_CMD 0xF0000000 + +#define TI_PCI_READMAX_4 0x04 +#define TI_PCI_READMAX_16 0x08 +#define TI_PCI_READMAX_32 0x0C +#define TI_PCI_READMAX_64 0x10 +#define TI_PCI_READMAX_128 0x14 +#define TI_PCI_READMAX_256 0x18 +#define TI_PCI_READMAX_1024 0x1C + +#define TI_PCI_WRITEMAX_4 0x20 +#define TI_PCI_WRITEMAX_16 0x40 +#define TI_PCI_WRITEMAX_32 0x60 +#define TI_PCI_WRITEMAX_64 0x80 +#define TI_PCI_WRITEMAX_128 0xA0 +#define TI_PCI_WRITEMAX_256 0xC0 +#define TI_PCI_WRITEMAX_1024 0xE0 + +#define TI_PCI_READ_CMD 0x06000000 +#define TI_PCI_WRITE_CMD 0x70000000 + +/* + * DMA state register. + */ +#define TI_DMASTATE_ENABLE 0x00000001 +#define TI_DMASTATE_PAUSE 0x00000002 + +/* + * CPU state register. + */ +#define TI_CPUSTATE_RESET 0x00000001 +#define TI_CPUSTATE_STEP 0x00000002 +#define TI_CPUSTATE_ROMFAIL 0x00000010 +#define TI_CPUSTATE_HALT 0x00010000 +/* + * MAC TX state register + */ +#define TI_TXSTATE_RESET 0x00000001 +#define TI_TXSTATE_ENB 0x00000002 +#define TI_TXSTATE_STOP 0x00000004 + +/* + * MAC RX state register + */ +#define TI_RXSTATE_RESET 0x00000001 +#define TI_RXSTATE_ENB 0x00000002 +#define TI_RXSTATE_STOP 0x00000004 + +/* + * Tigon 2 mailbox registers. The mailbox area consists of 256 bytes + * split into 64 bit registers. Only the lower 32 bits of each mailbox + * are used. + */ +#define TI_MB_HOSTINTR_HI 0x500 +#define TI_MB_HOSTINTR_LO 0x504 +#define TI_MB_HOSTINTR TI_MB_HOSTINTR_LO +#define TI_MB_CMDPROD_IDX_HI 0x508 +#define TI_MB_CMDPROD_IDX_LO 0x50C +#define TI_MB_CMDPROD_IDX TI_MB_CMDPROD_IDX_LO +#define TI_MB_SENDPROD_IDX_HI 0x510 +#define TI_MB_SENDPROD_IDX_LO 0x514 +#define TI_MB_SENDPROD_IDX TI_MB_SENDPROD_IDX_LO +#define TI_MB_STDRXPROD_IDX_HI 0x518 /* Tigon 2 only */ +#define TI_MB_STDRXPROD_IDX_LO 0x51C /* Tigon 2 only */ +#define TI_MB_STDRXPROD_IDX TI_MB_STDRXPROD_IDX_LO +#define TI_MB_JUMBORXPROD_IDX_HI 0x520 /* Tigon 2 only */ +#define TI_MB_JUMBORXPROD_IDX_LO 0x524 /* Tigon 2 only */ +#define TI_MB_JUMBORXPROD_IDX TI_MB_JUMBORXPROD_IDX_LO +#define TI_MB_MINIRXPROD_IDX_HI 0x528 /* Tigon 2 only */ +#define TI_MB_MINIRXPROD_IDX_LO 0x52C /* Tigon 2 only */ +#define TI_MB_MINIRXPROD_IDX TI_MB_MINIRXPROD_IDX_LO +#define TI_MB_RSVD 0x530 + +/* + * Tigon 2 general communication registers. These are 64 and 32 bit + * registers which are only valid after the firmware has been + * loaded and started. They actually exist in NIC memory but are + * mapped into the host memory via the shared memory region. + * + * The NIC internally maps these registers starting at address 0, + * so to determine the NIC address of any of these registers, we + * subtract 0x600 (the address of the first register). + */ + +#define TI_GCR_BASE 0x600 +#define TI_GCR_MACADDR 0x600 +#define TI_GCR_PAR0 0x600 +#define TI_GCR_PAR1 0x604 +#define TI_GCR_GENINFO_HI 0x608 +#define TI_GCR_GENINFO_LO 0x60C +#define TI_GCR_MCASTADDR 0x610 /* obsolete */ +#define TI_GCR_MAR0 0x610 /* obsolete */ +#define TI_GCR_MAR1 0x614 /* obsolete */ +#define TI_GCR_OPMODE 0x618 +#define TI_GCR_DMA_READCFG 0x61C +#define TI_GCR_DMA_WRITECFG 0x620 +#define TI_GCR_TX_BUFFER_RATIO 0x624 +#define TI_GCR_EVENTCONS_IDX 0x628 +#define TI_GCR_CMDCONS_IDX 0x62C +#define TI_GCR_TUNEPARMS 0x630 +#define TI_GCR_RX_COAL_TICKS 0x630 +#define TI_GCR_TX_COAL_TICKS 0x634 +#define TI_GCR_STAT_TICKS 0x638 +#define TI_GCR_TX_MAX_COAL_BD 0x63C +#define TI_GCR_RX_MAX_COAL_BD 0x640 +#define TI_GCR_NIC_TRACING 0x644 +#define TI_GCR_GLINK 0x648 +#define TI_GCR_LINK 0x64C +#define TI_GCR_NICTRACE_PTR 0x650 +#define TI_GCR_NICTRACE_START 0x654 +#define TI_GCR_NICTRACE_LEN 0x658 +#define TI_GCR_IFINDEX 0x65C +#define TI_GCR_IFMTU 0x660 +#define TI_GCR_MASK_INTRS 0x664 +#define TI_GCR_GLINK_STAT 0x668 +#define TI_GCR_LINK_STAT 0x66C +#define TI_GCR_RXRETURNCONS_IDX 0x680 +#define TI_GCR_CMDRING 0x700 + +#define TI_GCR_NIC_ADDR(x) (x - TI_GCR_BASE); + +/* + * Local memory window. The local memory window is a 2K shared + * memory region which can be used to access the NIC's internal + * SRAM. The window can be mapped to a given 2K region using + * the TI_WINDOW_BASE register. + */ +#define TI_WINDOW 0x800 +#define TI_WINLEN 0x800 + +#define TI_TICKS_PER_SEC 1000000 + +/* + * Operation mode register. + */ +#define TI_OPMODE_BYTESWAP_BD 0x00000002 +#define TI_OPMODE_WORDSWAP_BD 0x00000004 +#define TI_OPMODE_WARN_ENB 0x00000008 /* not yet implimented */ +#define TI_OPMODE_BYTESWAP_DATA 0x00000010 +#define TI_OPMODE_1_DMA_ACTIVE 0x00000040 +#define TI_OPMODE_SBUS 0x00000100 +#define TI_OPMODE_DONT_FRAG_JUMBO 0x00000200 +#define TI_OPMODE_INCLUDE_CRC 0x00000400 +#define TI_OPMODE_RX_BADFRAMES 0x00000800 +#define TI_OPMODE_NO_EVENT_INTRS 0x00001000 +#define TI_OPMODE_NO_TX_INTRS 0x00002000 +#define TI_OPMODE_NO_RX_INTRS 0x00004000 +#define TI_OPMODE_FATAL_ENB 0x40000000 /* not yet implimented */ +#define TI_OPMODE_JUMBO_HDRSPLIT 0x00008000 + +/* + * DMA configuration thresholds. + */ +#define TI_DMA_STATE_THRESH_16W 0x00000100 +#define TI_DMA_STATE_THRESH_8W 0x00000080 +#define TI_DMA_STATE_THRESH_4W 0x00000040 +#define TI_DMA_STATE_THRESH_2W 0x00000020 +#define TI_DMA_STATE_THRESH_1W 0x00000010 + +#define TI_DMA_STATE_FORCE_32_BIT 0x00000008 + +/* + * Gigabit link status bits. + */ +#define TI_GLNK_SENSE_NO_BEG 0x00002000 +#define TI_GLNK_LOOPBACK 0x00004000 +#define TI_GLNK_PREF 0x00008000 +#define TI_GLNK_1000MB 0x00040000 +#define TI_GLNK_FULL_DUPLEX 0x00080000 +#define TI_GLNK_TX_FLOWCTL_Y 0x00200000 /* Tigon 2 only */ +#define TI_GLNK_RX_FLOWCTL_Y 0x00800000 +#define TI_GLNK_AUTONEGENB 0x20000000 +#define TI_GLNK_ENB 0x40000000 + +/* + * Link status bits. + */ +#define TI_LNK_LOOPBACK 0x00004000 +#define TI_LNK_PREF 0x00008000 +#define TI_LNK_10MB 0x00010000 +#define TI_LNK_100MB 0x00020000 +#define TI_LNK_1000MB 0x00040000 +#define TI_LNK_FULL_DUPLEX 0x00080000 +#define TI_LNK_HALF_DUPLEX 0x00100000 +#define TI_LNK_TX_FLOWCTL_Y 0x00200000 /* Tigon 2 only */ +#define TI_LNK_RX_FLOWCTL_Y 0x00800000 +#define TI_LNK_AUTONEGENB 0x20000000 +#define TI_LNK_ENB 0x40000000 + +/* + * Ring size constants. + */ +#define TI_EVENT_RING_CNT 256 +#define TI_CMD_RING_CNT 64 +#define TI_STD_RX_RING_CNT 512 +#define TI_JUMBO_RX_RING_CNT 256 +#define TI_MINI_RX_RING_CNT 1024 +#define TI_RETURN_RING_CNT 2048 + +/* + * Possible TX ring sizes. + */ +#define TI_TX_RING_CNT_128 128 +#define TI_TX_RING_BASE_128 0x3800 + +#define TI_TX_RING_CNT_256 256 +#define TI_TX_RING_BASE_256 0x3000 + +#define TI_TX_RING_CNT_512 512 +#define TI_TX_RING_BASE_512 0x2000 + +#define TI_TX_RING_CNT TI_TX_RING_CNT_512 +#define TI_TX_RING_BASE TI_TX_RING_BASE_512 + +/* + * The Tigon can have up to 8MB of external SRAM, however the Tigon 1 + * is limited to 2MB total, and in general I think most adapters have + * around 1MB. We use this value for zeroing the NIC's SRAM, so to + * be safe we use the largest possible value (zeroing memory that + * isn't there doesn't hurt anything). + */ +#define TI_MEM_MAX 0x7FFFFF + +/* + * Maximum register address on the Tigon. + */ +#define TI_REG_MAX 0x3fff + +/* + * These values were taken from Alteon's tg.h. + */ +#define TI_BEG_SRAM 0x0 /* host thinks it's here */ +#define TI_BEG_SCRATCH 0xc00000 /* beg of scratch pad area */ +#define TI_END_SRAM_II 0x800000 /* end of SRAM, for 2 MB stuffed */ +#define TI_END_SCRATCH_II 0xc04000 /* end of scratch pad CPU A (16KB) */ +#define TI_END_SCRATCH_B 0xc02000 /* end of scratch pad CPU B (8KB) */ +#define TI_BEG_SCRATCH_B_DEBUG 0xd00000 /* beg of scratch pad for ioctl */ +#define TI_END_SCRATCH_B_DEBUG 0xd02000 /* end of scratch pad for ioctl */ +#define TI_SCRATCH_DEBUG_OFF 0x100000 /* offset for ioctl usage */ +#define TI_END_SRAM_I 0x200000 /* end of SRAM, for 2 MB stuffed */ +#define TI_END_SCRATCH_I 0xc00800 /* end of scratch pad area (2KB) */ +#define TI_BEG_PROM 0x40000000 /* beg of PROM, special access */ +#define TI_BEG_FLASH 0x80000000 /* beg of EEPROM, special access */ +#define TI_END_FLASH 0x80100000 /* end of EEPROM for 1 MB stuff */ +#define TI_BEG_SER_EEPROM 0xa0000000 /* beg of Serial EEPROM (fake out) */ +#define TI_END_SER_EEPROM 0xa0002000 /* end of Serial EEPROM (fake out) */ +#define TI_BEG_REGS 0xc0000000 /* beg of register area */ +#define TI_END_REGS 0xc0000400 /* end of register area */ +#define TI_END_WRITE_REGS 0xc0000180 /* can't write GPRs currently */ +#define TI_BEG_REGS2 0xc0000200 /* beg of second writeable reg area */ +/* the EEPROM is byte addressable in a pretty odd way */ +#define EEPROM_BYTE_LOC 0xff000000 + +/* + * From Alteon's tg.h. + */ +#define TI_PROCESSOR_A 0 +#define TI_PROCESSOR_B 1 +#define TI_CPU_A TG_PROCESSOR_A +#define TI_CPU_B TG_PROCESSOR_B + +/* + * Following macro can be used to access to any of the CPU registers + * It will adjust the address appropriately. + * Parameters: + * reg - The register to access, e.g TI_CPU_CONTROL + * cpu - cpu, i.e PROCESSOR_A or PROCESSOR_B (or TI_CPU_A or TI_CPU_B) + */ +#define CPU_REG(reg, cpu) ((reg) + (cpu) * 0x100) + +/* + * Even on the alpha, pci addresses are 32-bit quantities + */ + +#ifdef __64_bit_pci_addressing__ +typedef struct { + u_int64_t ti_addr; +} ti_hostaddr; +#define TI_HOSTADDR(x) x.ti_addr +#else +typedef struct { + u_int32_t ti_addr_hi; + u_int32_t ti_addr_lo; +} ti_hostaddr; +#define TI_HOSTADDR(x) x.ti_addr_lo +#endif + +/* + * Ring control block structure. The rules for the max_len field + * are as follows: + * + * For the send ring, max_len indicates the number of entries in the + * ring (128, 256 or 512). + * + * For the standard receive ring, max_len indicates the threshold + * used to decide when a frame should be put in the jumbo receive ring + * instead of the standard one. + * + * For the mini ring, max_len indicates the size of the buffers in the + * ring. This is the value used to decide when a frame is small enough + * to be placed in the mini ring. + * + * For the return receive ring, max_len indicates the number of entries + * in the ring. It can be one of 2048, 1024 or 0 (which is the same as + * 2048 for backwards compatibility). The value 1024 can only be used + * if the mini ring is disabled. + */ +struct ti_rcb { + ti_hostaddr ti_hostaddr; +#if BYTE_ORDER == BIG_ENDIAN + u_int16_t ti_max_len; + u_int16_t ti_flags; +#else + u_int16_t ti_flags; + u_int16_t ti_max_len; +#endif + u_int32_t ti_unused; +}; + +#define TI_RCB_FLAG_TCP_UDP_CKSUM 0x00000001 +#define TI_RCB_FLAG_IP_CKSUM 0x00000002 +#define TI_RCB_FLAG_NO_PHDR_CKSUM 0x00000008 +#define TI_RCB_FLAG_VLAN_ASSIST 0x00000010 +#define TI_RCB_FLAG_COAL_UPD_ONLY 0x00000020 +#define TI_RCB_FLAG_HOST_RING 0x00000040 +#define TI_RCB_FLAG_IEEE_SNAP_CKSUM 0x00000080 +#define TI_RCB_FLAG_USE_EXT_RX_BD 0x00000100 +#define TI_RCB_FLAG_RING_DISABLED 0x00000200 + +struct ti_producer { + u_int32_t ti_idx; + u_int32_t ti_unused; +}; + +/* + * Tigon general information block. This resides in host memory + * and contains the status counters, ring control blocks and + * producer pointers. + */ + +struct ti_gib { + struct ti_stats ti_stats; + struct ti_rcb ti_ev_rcb; + struct ti_rcb ti_cmd_rcb; + struct ti_rcb ti_tx_rcb; + struct ti_rcb ti_std_rx_rcb; + struct ti_rcb ti_jumbo_rx_rcb; + struct ti_rcb ti_mini_rx_rcb; + struct ti_rcb ti_return_rcb; + ti_hostaddr ti_ev_prodidx_ptr; + ti_hostaddr ti_return_prodidx_ptr; + ti_hostaddr ti_tx_considx_ptr; + ti_hostaddr ti_refresh_stats_ptr; +}; + +/* + * Buffer descriptor structures. There are basically three types + * of structures: normal receive descriptors, extended receive + * descriptors and transmit descriptors. The extended receive + * descriptors are optionally used only for the jumbo receive ring. + */ + +struct ti_rx_desc { + ti_hostaddr ti_addr; +#if BYTE_ORDER == BIG_ENDIAN + u_int16_t ti_idx; + u_int16_t ti_len; +#else + u_int16_t ti_len; + u_int16_t ti_idx; +#endif +#if BYTE_ORDER == BIG_ENDIAN + u_int16_t ti_type; + u_int16_t ti_flags; +#else + u_int16_t ti_flags; + u_int16_t ti_type; +#endif +#if BYTE_ORDER == BIG_ENDIAN + u_int16_t ti_ip_cksum; + u_int16_t ti_tcp_udp_cksum; +#else + u_int16_t ti_tcp_udp_cksum; + u_int16_t ti_ip_cksum; +#endif +#if BYTE_ORDER == BIG_ENDIAN + u_int16_t ti_error_flags; + u_int16_t ti_vlan_tag; +#else + u_int16_t ti_vlan_tag; + u_int16_t ti_error_flags; +#endif + u_int32_t ti_rsvd; + u_int32_t ti_opaque; +}; + +struct ti_rx_desc_ext { + ti_hostaddr ti_addr1; + ti_hostaddr ti_addr2; + ti_hostaddr ti_addr3; +#if BYTE_ORDER == BIG_ENDIAN + u_int16_t ti_len1; + u_int16_t ti_len2; +#else + u_int16_t ti_len2; + u_int16_t ti_len1; +#endif +#if BYTE_ORDER == BIG_ENDIAN + u_int16_t ti_len3; + u_int16_t ti_rsvd0; +#else + u_int16_t ti_rsvd0; + u_int16_t ti_len3; +#endif + ti_hostaddr ti_addr0; +#if BYTE_ORDER == BIG_ENDIAN + u_int16_t ti_idx; + u_int16_t ti_len0; +#else + u_int16_t ti_len0; + u_int16_t ti_idx; +#endif +#if BYTE_ORDER == BIG_ENDIAN + u_int16_t ti_type; + u_int16_t ti_flags; +#else + u_int16_t ti_flags; + u_int16_t ti_type; +#endif +#if BYTE_ORDER == BIG_ENDIAN + u_int16_t ti_ip_cksum; + u_int16_t ti_tcp_udp_cksum; +#else + u_int16_t ti_tcp_udp_cksum; + u_int16_t ti_ip_cksum; +#endif +#if BYTE_ORDER == BIG_ENDIAN + u_int16_t ti_error_flags; + u_int16_t ti_vlan_tag; +#else + u_int16_t ti_vlan_tag; + u_int16_t ti_error_flags; +#endif + u_int32_t ti_rsvd1; + u_int32_t ti_opaque; +}; + +/* + * Transmit descriptors are, mercifully, very small. + */ +struct ti_tx_desc { + ti_hostaddr ti_addr; +#if BYTE_ORDER == BIG_ENDIAN + u_int16_t ti_len; + u_int16_t ti_flags; +#else + u_int16_t ti_flags; + u_int16_t ti_len; +#endif +#if BYTE_ORDER == BIG_ENDIAN + u_int16_t ti_rsvd; + u_int16_t ti_vlan_tag; +#else + u_int16_t ti_vlan_tag; + u_int16_t ti_rsvd; +#endif +}; + +/* + * NOTE! On the Alpha, we have an alignment constraint. + * The first thing in the packet is a 14-byte Ethernet header. + * This means that the packet is misaligned. To compensate, + * we actually offset the data 2 bytes into the cluster. This + * alignes the packet after the Ethernet header at a 32-bit + * boundary. + */ + +#define ETHER_ALIGN 2 + +#define TI_FRAMELEN 1518 +#define TI_JUMBO_FRAMELEN 9018 +#define TI_JUMBO_MTU (TI_JUMBO_FRAMELEN-ETHER_HDR_LEN-ETHER_CRC_LEN) +#define TI_PAGE_SIZE PAGE_SIZE +#define TI_MIN_FRAMELEN 60 + +/* + * Buffer descriptor error flags. + */ +#define TI_BDERR_CRC 0x0001 +#define TI_BDERR_COLLDETECT 0x0002 +#define TI_BDERR_LINKLOST 0x0004 +#define TI_BDERR_DECODE 0x0008 +#define TI_BDERR_ODD_NIBBLES 0x0010 +#define TI_BDERR_MAC_ABRT 0x0020 +#define TI_BDERR_RUNT 0x0040 +#define TI_BDERR_TRUNC 0x0080 +#define TI_BDERR_GIANT 0x0100 + +/* + * Buffer descriptor flags. + */ +#define TI_BDFLAG_TCP_UDP_CKSUM 0x0001 +#define TI_BDFLAG_IP_CKSUM 0x0002 +#define TI_BDFLAG_END 0x0004 +#define TI_BDFLAG_MORE 0x0008 +#define TI_BDFLAG_JUMBO_RING 0x0010 +#define TI_BDFLAG_UCAST_PKT 0x0020 +#define TI_BDFLAG_MCAST_PKT 0x0040 +#define TI_BDFLAG_BCAST_PKT 0x0060 +#define TI_BDFLAG_IP_FRAG 0x0080 +#define TI_BDFLAG_IP_FRAG_END 0x0100 +#define TI_BDFLAG_VLAN_TAG 0x0200 +#define TI_BDFLAG_ERROR 0x0400 +#define TI_BDFLAG_COAL_NOW 0x0800 +#define TI_BDFLAG_MINI_RING 0x1000 + +/* + * Descriptor type flags. I think these only have meaning for + * the Tigon 1. I had to extract them from the sample driver source + * since they aren't in the manual. + */ +#define TI_BDTYPE_TYPE_NULL 0x0000 +#define TI_BDTYPE_SEND_BD 0x0001 +#define TI_BDTYPE_RECV_BD 0x0002 +#define TI_BDTYPE_RECV_JUMBO_BD 0x0003 +#define TI_BDTYPE_RECV_BD_LAST 0x0004 +#define TI_BDTYPE_SEND_DATA 0x0005 +#define TI_BDTYPE_SEND_DATA_LAST 0x0006 +#define TI_BDTYPE_RECV_DATA 0x0007 +#define TI_BDTYPE_RECV_DATA_LAST 0x000b +#define TI_BDTYPE_EVENT_RUPT 0x000c +#define TI_BDTYPE_EVENT_NO_RUPT 0x000d +#define TI_BDTYPE_ODD_START 0x000e +#define TI_BDTYPE_UPDATE_STATS 0x000f +#define TI_BDTYPE_SEND_DUMMY_DMA 0x0010 +#define TI_BDTYPE_EVENT_PROD 0x0011 +#define TI_BDTYPE_TX_CONS 0x0012 +#define TI_BDTYPE_RX_PROD 0x0013 +#define TI_BDTYPE_REFRESH_STATS 0x0014 +#define TI_BDTYPE_SEND_DATA_LAST_VLAN 0x0015 +#define TI_BDTYPE_SEND_DATA_COAL 0x0016 +#define TI_BDTYPE_SEND_DATA_LAST_COAL 0x0017 +#define TI_BDTYPE_SEND_DATA_LAST_VLAN_COAL 0x0018 +#define TI_BDTYPE_TX_CONS_NO_INTR 0x0019 + +/* + * Tigon command structure. + */ +struct ti_cmd_desc { +#if BYTE_ORDER == BIG_ENDIAN + u_int32_t ti_cmd:8; + u_int32_t ti_code:12; + u_int32_t ti_idx:12; +#else + u_int32_t ti_idx:12; + u_int32_t ti_code:12; + u_int32_t ti_cmd:8; +#endif +}; + +#define TI_CMD_HOST_STATE 0x01 +#define TI_CMD_CODE_STACK_UP 0x01 +#define TI_CMD_CODE_STACK_DOWN 0x02 + +/* + * This command enables software address filtering. It's a workaround + * for a bug in the Tigon 1 and not implemented for the Tigon 2. + */ +#define TI_CMD_FDR_FILTERING 0x02 +#define TI_CMD_CODE_FILT_ENB 0x01 +#define TI_CMD_CODE_FILT_DIS 0x02 + +#define TI_CMD_SET_RX_PROD_IDX 0x03 /* obsolete */ +#define TI_CMD_UPDATE_GENCOM 0x04 +#define TI_CMD_RESET_JUMBO_RING 0x05 +#define TI_CMD_SET_PARTIAL_RX_CNT 0x06 +#define TI_CMD_ADD_MCAST_ADDR 0x08 /* obsolete */ +#define TI_CMD_DEL_MCAST_ADDR 0x09 /* obsolete */ + +#define TI_CMD_SET_PROMISC_MODE 0x0A +#define TI_CMD_CODE_PROMISC_ENB 0x01 +#define TI_CMD_CODE_PROMISC_DIS 0x02 + +#define TI_CMD_LINK_NEGOTIATION 0x0B +#define TI_CMD_CODE_NEGOTIATE_BOTH 0x00 +#define TI_CMD_CODE_NEGOTIATE_GIGABIT 0x01 +#define TI_CMD_CODE_NEGOTIATE_10_100 0x02 + +#define TI_CMD_SET_MAC_ADDR 0x0C +#define TI_CMD_CLR_PROFILE 0x0D + +#define TI_CMD_SET_ALLMULTI 0x0E +#define TI_CMD_CODE_ALLMULTI_ENB 0x01 +#define TI_CMD_CODE_ALLMULTI_DIS 0x02 + +#define TI_CMD_CLR_STATS 0x0F +#define TI_CMD_SET_RX_JUMBO_PROD_IDX 0x10 /* obsolete */ +#define TI_CMD_RFRSH_STATS 0x11 + +#define TI_CMD_EXT_ADD_MCAST 0x12 +#define TI_CMD_EXT_DEL_MCAST 0x13 + +/* + * Utility macros to make issuing commands a little simpler. Assumes + * that 'sc' and 'cmd' are in local scope. + */ +#define TI_DO_CMD(x, y, z) \ + cmd.ti_cmd = (x); \ + cmd.ti_code = (y); \ + cmd.ti_idx = (z); \ + ti_cmd(sc, &cmd); + +#define TI_DO_CMD_EXT(x, y, z, v, w) \ + cmd.ti_cmd = (x); \ + cmd.ti_code = (y); \ + cmd.ti_idx = (z); \ + ti_cmd_ext(sc, &cmd, (v), (w)); + +/* + * Other utility macros. + */ +#define TI_INC(x, y) (x) = (x + 1) % y + +#define TI_UPDATE_JUMBOPROD(x, y) \ + if (x->ti_hwrev == TI_HWREV_TIGON) { \ + TI_DO_CMD(TI_CMD_SET_RX_JUMBO_PROD_IDX, 0, y); \ + } else { \ + CSR_WRITE_4(x, TI_MB_JUMBORXPROD_IDX, y); \ + } + +#define TI_UPDATE_MINIPROD(x, y) \ + CSR_WRITE_4(x, TI_MB_MINIRXPROD_IDX, y); + +#define TI_UPDATE_STDPROD(x, y) \ + if (x->ti_hwrev == TI_HWREV_TIGON) { \ + TI_DO_CMD(TI_CMD_SET_RX_PROD_IDX, 0, y); \ + } else { \ + CSR_WRITE_4(x, TI_MB_STDRXPROD_IDX, y); \ + } + + +/* + * Tigon event structure. + */ +struct ti_event_desc { +#if BYTE_ORDER == BIG_ENDIAN + u_int32_t ti_event:8; + u_int32_t ti_code:12; + u_int32_t ti_idx:12; +#else + u_int32_t ti_idx:12; + u_int32_t ti_code:12; + u_int32_t ti_event:8; +#endif + u_int32_t ti_rsvd; +}; + +/* + * Tigon events. + */ +#define TI_EV_FIRMWARE_UP 0x01 +#define TI_EV_STATS_UPDATED 0x04 + +#define TI_EV_LINKSTAT_CHANGED 0x06 +#define TI_EV_CODE_GIG_LINK_UP 0x01 +#define TI_EV_CODE_LINK_DOWN 0x02 +#define TI_EV_CODE_LINK_UP 0x03 + +#define TI_EV_ERROR 0x07 +#define TI_EV_CODE_ERR_INVAL_CMD 0x01 +#define TI_EV_CODE_ERR_UNIMP_CMD 0x02 +#define TI_EV_CODE_ERR_BADCFG 0x03 + +#define TI_EV_MCAST_UPDATED 0x08 +#define TI_EV_CODE_MCAST_ADD 0x01 +#define TI_EV_CODE_MCAST_DEL 0x02 + +#define TI_EV_RESET_JUMBO_RING 0x09 +/* + * Register access macros. The Tigon always uses memory mapped register + * accesses and all registers must be accessed with 32 bit operations. + */ + +#define CSR_WRITE_4(sc, reg, val) \ + bus_space_write_4(sc->ti_btag, sc->ti_bhandle, reg, val) + +#define CSR_READ_4(sc, reg) \ + bus_space_read_4(sc->ti_btag, sc->ti_bhandle, reg) + +#define TI_SETBIT(sc, reg, x) \ + CSR_WRITE_4(sc, reg, (CSR_READ_4(sc, reg) | x)) +#define TI_CLRBIT(sc, reg, x) \ + CSR_WRITE_4(sc, reg, (CSR_READ_4(sc, reg) & ~x)) + +/* + * Memory management stuff. Note: the SSLOTS, MSLOTS and JSLOTS + * values are tuneable. They control the actual amount of buffers + * allocated for the standard, mini and jumbo receive rings. + */ + +#define TI_SSLOTS 256 +#define TI_MSLOTS 256 +#define TI_JSLOTS 384 + +#define TI_JRAWLEN (TI_JUMBO_FRAMELEN + ETHER_ALIGN) +#define TI_JLEN (TI_JRAWLEN + (sizeof(u_int64_t) - \ + (TI_JRAWLEN % sizeof(u_int64_t)))) +#define TI_JPAGESZ PAGE_SIZE +#define TI_RESID (TI_JPAGESZ - (TI_JLEN * TI_JSLOTS) % TI_JPAGESZ) +#define TI_JMEM ((TI_JLEN * TI_JSLOTS) + TI_RESID) + +/* + * Ring structures. Most of these reside in host memory and we tell + * the NIC where they are via the ring control blocks. The exceptions + * are the tx and command rings, which live in NIC memory and which + * we access via the shared memory window. + */ +struct ti_ring_data { + struct ti_rx_desc ti_rx_std_ring[TI_STD_RX_RING_CNT]; +#ifdef PRIVATE_JUMBOS + struct ti_rx_desc ti_rx_jumbo_ring[TI_JUMBO_RX_RING_CNT]; +#else + struct ti_rx_desc_ext ti_rx_jumbo_ring[TI_JUMBO_RX_RING_CNT]; +#endif + struct ti_rx_desc ti_rx_mini_ring[TI_MINI_RX_RING_CNT]; + struct ti_rx_desc ti_rx_return_ring[TI_RETURN_RING_CNT]; + struct ti_event_desc ti_event_ring[TI_EVENT_RING_CNT]; + struct ti_tx_desc ti_tx_ring[TI_TX_RING_CNT]; + /* + * Make sure producer structures are aligned on 32-byte cache + * line boundaries. + */ + struct ti_producer ti_ev_prodidx_r; + u_int32_t ti_pad0[6]; + struct ti_producer ti_return_prodidx_r; + u_int32_t ti_pad1[6]; + struct ti_producer ti_tx_considx_r; + u_int32_t ti_pad2[6]; + struct ti_tx_desc *ti_tx_ring_nic;/* pointer to shared mem */ + struct ti_cmd_desc *ti_cmd_ring; /* pointer to shared mem */ + struct ti_gib ti_info; +}; + +/* + * Mbuf pointers. We need these to keep track of the virtual addresses + * of our mbuf chains since we can only convert from physical to virtual, + * not the other way around. + */ +struct ti_chain_data { + struct mbuf *ti_tx_chain[TI_TX_RING_CNT]; + struct mbuf *ti_rx_std_chain[TI_STD_RX_RING_CNT]; + struct mbuf *ti_rx_jumbo_chain[TI_JUMBO_RX_RING_CNT]; + struct mbuf *ti_rx_mini_chain[TI_MINI_RX_RING_CNT]; + /* Stick the jumbo mem management stuff here too. */ + caddr_t ti_jslots[TI_JSLOTS]; + void *ti_jumbo_buf; +}; + +struct ti_type { + u_int16_t ti_vid; + u_int16_t ti_did; + char *ti_name; +}; + +#define TI_HWREV_TIGON 0x01 +#define TI_HWREV_TIGON_II 0x02 +#define TI_TIMEOUT 1000 +#define TI_TXCONS_UNSET 0xFFFF /* impossible value */ + +struct ti_mc_entry { + struct ether_addr mc_addr; + SLIST_ENTRY(ti_mc_entry) mc_entries; +}; + +struct ti_jpool_entry { + int slot; + SLIST_ENTRY(ti_jpool_entry) jpool_entries; +}; + +typedef enum { + TI_FLAG_NONE = 0x00, + TI_FLAG_DEBUGING = 0x01, + TI_FLAG_WAIT_FOR_LINK = 0x02 +} ti_flag_vals; + +struct ti_softc { + STAILQ_ENTRY(ti_softc) ti_links; + struct arpcom arpcom; /* interface info */ + bus_space_handle_t ti_bhandle; + vm_offset_t ti_vhandle; + bus_space_tag_t ti_btag; + void *ti_intrhand; + struct resource *ti_irq; + struct resource *ti_res; + struct ifmedia ifmedia; /* media info */ + u_int8_t ti_unit; /* interface number */ + u_int8_t ti_hwrev; /* Tigon rev (1 or 2) */ + u_int8_t ti_copper; /* 1000baseTX card */ + u_int8_t ti_linkstat; /* Link state */ + int ti_hdrsplit; /* enable header splitting */ + struct ti_ring_data *ti_rdata; /* rings */ + struct ti_chain_data ti_cdata; /* mbufs */ +#define ti_ev_prodidx ti_rdata->ti_ev_prodidx_r +#define ti_return_prodidx ti_rdata->ti_return_prodidx_r +#define ti_tx_considx ti_rdata->ti_tx_considx_r + u_int16_t ti_tx_saved_considx; + u_int16_t ti_rx_saved_considx; + u_int16_t ti_ev_saved_considx; + u_int16_t ti_cmd_saved_prodidx; + u_int16_t ti_std; /* current std ring head */ + u_int16_t ti_mini; /* current mini ring head */ + u_int16_t ti_jumbo; /* current jumo ring head */ + SLIST_HEAD(__ti_mchead, ti_mc_entry) ti_mc_listhead; + SLIST_HEAD(__ti_jfreehead, ti_jpool_entry) ti_jfree_listhead; + SLIST_HEAD(__ti_jinusehead, ti_jpool_entry) ti_jinuse_listhead; + u_int32_t ti_stat_ticks; + u_int32_t ti_rx_coal_ticks; + u_int32_t ti_tx_coal_ticks; + u_int32_t ti_rx_max_coal_bds; + u_int32_t ti_tx_max_coal_bds; + u_int32_t ti_tx_buf_ratio; + int ti_if_flags; + int ti_txcnt; + struct mtx ti_mtx; + ti_flag_vals ti_flags; + dev_t dev; +}; + +#define TI_LOCK(_sc) mtx_lock(&(_sc)->ti_mtx) +#define TI_UNLOCK(_sc) mtx_unlock(&(_sc)->ti_mtx) + +/* + * Microchip Technology 24Cxx EEPROM control bytes + */ +#define EEPROM_CTL_READ 0xA1 /* 0101 0001 */ +#define EEPROM_CTL_WRITE 0xA0 /* 0101 0000 */ + +/* + * Note that EEPROM_START leaves transmission enabled. + */ +#define EEPROM_START \ + TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock pin high */\ + TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Set DATA bit to 1 */ \ + TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Enable xmit to write bit */\ + TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Pull DATA bit to 0 again */\ + TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock low again */ + +/* + * EEPROM_STOP ends access to the EEPROM and clears the ETXEN bit so + * that no further data can be written to the EEPROM I/O pin. + */ +#define EEPROM_STOP \ + TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Disable xmit */ \ + TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Pull DATA to 0 */ \ + TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock high */ \ + TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Enable xmit */ \ + TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Toggle DATA to 1 */ \ + TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Disable xmit. */ \ + TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock low again */ + + +#ifdef __alpha__ +#undef vtophys +#define vtophys(va) alpha_XXX_dmamap((vm_offset_t)va) +#endif |
