summaryrefslogtreecommitdiffstats
path: root/sys/dev/sio/siovar.h
diff options
context:
space:
mode:
Diffstat (limited to 'sys/dev/sio/siovar.h')
-rw-r--r--sys/dev/sio/siovar.h112
1 files changed, 0 insertions, 112 deletions
diff --git a/sys/dev/sio/siovar.h b/sys/dev/sio/siovar.h
index 7d95fe9..ebc2968 100644
--- a/sys/dev/sio/siovar.h
+++ b/sys/dev/sio/siovar.h
@@ -33,118 +33,6 @@
* $FreeBSD$
*/
-#define SET_FLAG(dev, bit) device_set_flags(dev, device_get_flags(dev) | (bit))
-#define CLR_FLAG(dev, bit) device_set_flags(dev, device_get_flags(dev) & ~(bit))
-
-#define CE_NTYPES 3
-
-/* types. XXX - should be elsewhere */
-typedef u_int Port_t; /* hardware port */
-typedef u_char bool_t; /* boolean */
-
-/* queue of linear buffers */
-struct lbq {
- u_char *l_head; /* next char to process */
- u_char *l_tail; /* one past the last char to process */
- struct lbq *l_next; /* next in queue */
- bool_t l_queued; /* nonzero if queued */
-};
-
-/* com device structure */
-struct com_s {
- u_int flags; /* Copy isa device flags */
- u_char state; /* miscellaneous flag bits */
- bool_t active_out; /* nonzero if the callout device is open */
- u_char cfcr_image; /* copy of value written to CFCR */
-#ifdef COM_ESP
- bool_t esp; /* is this unit a hayes esp board? */
-#endif
- u_char extra_state; /* more flag bits, separate for order trick */
- u_char fifo_image; /* copy of value written to FIFO */
- bool_t hasfifo; /* nonzero for 16550 UARTs */
- bool_t st16650a; /* Is a Startech 16650A or RTS/CTS compat */
- bool_t loses_outints; /* nonzero if device loses output interrupts */
- u_char mcr_image; /* copy of value written to MCR */
-#ifdef COM_MULTIPORT
- bool_t multiport; /* is this unit part of a multiport device? */
-#endif /* COM_MULTIPORT */
- bool_t no_irq; /* nonzero if irq is not attached */
- bool_t gone; /* hardware disappeared */
- bool_t poll; /* nonzero if polling is required */
- bool_t poll_output; /* nonzero if polling for output is required */
- int unit; /* unit number */
- int dtr_wait; /* time to hold DTR down on close (* 1/hz) */
- u_int tx_fifo_size;
- u_int wopeners; /* # processes waiting for DCD in open() */
-
- /*
- * The high level of the driver never reads status registers directly
- * because there would be too many side effects to handle conveniently.
- * Instead, it reads copies of the registers stored here by the
- * interrupt handler.
- */
- u_char last_modem_status; /* last MSR read by intr handler */
- u_char prev_modem_status; /* last MSR handled by high level */
-
- u_char hotchar; /* ldisc-specific char to be handled ASAP */
- u_char *ibuf; /* start of input buffer */
- u_char *ibufend; /* end of input buffer */
- u_char *ibufold; /* old input buffer, to be freed */
- u_char *ihighwater; /* threshold in input buffer */
- u_char *iptr; /* next free spot in input buffer */
- int ibufsize; /* size of ibuf (not include error bytes) */
- int ierroff; /* offset of error bytes in ibuf */
-
- struct lbq obufq; /* head of queue of output buffers */
- struct lbq obufs[2]; /* output buffers */
-
- bus_space_tag_t bst;
- bus_space_handle_t bsh;
-
- Port_t data_port; /* i/o ports */
-#ifdef COM_ESP
- Port_t esp_port;
-#endif
- Port_t int_id_port;
- Port_t modem_ctl_port;
- Port_t line_status_port;
- Port_t modem_status_port;
- Port_t intr_ctl_port; /* Ports of IIR register */
-
- struct tty *tp; /* cross reference */
-
- /* Initial state. */
- struct termios it_in; /* should be in struct tty */
- struct termios it_out;
-
- /* Lock state. */
- struct termios lt_in; /* should be in struct tty */
- struct termios lt_out;
-
- bool_t do_timestamp;
- bool_t do_dcd_timestamp;
- struct timeval timestamp;
- struct timeval dcd_timestamp;
- struct pps_state pps;
-
- u_long bytes_in; /* statistics */
- u_long bytes_out;
- u_int delta_error_counts[CE_NTYPES];
- u_long error_counts[CE_NTYPES];
-
- struct resource *irqres;
- struct resource *ioportres;
- void *cookie;
- dev_t devs[6];
-
- /*
- * Data area for output buffers. Someday we should build the output
- * buffer queue without copying data.
- */
- u_char obuf1[256];
- u_char obuf2[256];
-};
-
int sioattach __P((device_t dev, int xrid));
int siodetach __P((device_t dev));
int sioprobe __P((device_t dev, int xrid, int noprobe));
OpenPOWER on IntegriCloud