diff options
Diffstat (limited to 'sys/dev/pcm/pci/es137x.h')
| -rw-r--r-- | sys/dev/pcm/pci/es137x.h | 134 |
1 files changed, 134 insertions, 0 deletions
diff --git a/sys/dev/pcm/pci/es137x.h b/sys/dev/pcm/pci/es137x.h new file mode 100644 index 0000000..6c981e3 --- /dev/null +++ b/sys/dev/pcm/pci/es137x.h @@ -0,0 +1,134 @@ +/* + * This supports the ENSONIQ AudioPCI board based on the ES1370. + * + * Copyright (c) 1998 Joachim Kuebart <joki@kuebart.stuttgart.netsurf.de> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice immediately at the beginning of the file, without modification, + * this list of conditions, and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Absolutely no warranty of function or purpose is made by the author + * Joachim Kuebart. + * 4. Modifications may be freely made to this file if the above conditions + * are met. + * + * $Id: es1370_reg.h,v 1.1 1998/12/31 08:14:27 luigi Exp $ + */ + +#ifndef _ES1370_REG_H +#define _ES1370_REG_H + +#define ES1370_REG_CONTROL 0x00 +#define ES1370_REG_STATUS 0x04 +#define ES1370_REG_UART_DATA 0x08 +#define ES1370_REG_UART_STATUS 0x09 +#define ES1370_REG_UART_CONTROL 0x09 +#define ES1370_REG_UART_TEST 0x0a +#define ES1370_REG_MEMPAGE 0x0c +#define ES1370_REG_CODEC 0x10 +#define CODEC_INDEX_SHIFT 8 +#define ES1370_REG_SERIAL_CONTROL 0x20 +#define ES1370_REG_DAC1_SCOUNT 0x24 +#define ES1370_REG_DAC2_SCOUNT 0x28 +#define ES1370_REG_ADC_SCOUNT 0x2c + +#define ES1370_REG_DAC1_FRAMEADR 0xc30 +#define ES1370_REG_DAC1_FRAMECNT 0xc34 +#define ES1370_REG_DAC2_FRAMEADR 0xc38 +#define ES1370_REG_DAC2_FRAMECNT 0xc3c +#define ES1370_REG_ADC_FRAMEADR 0xd30 +#define ES1370_REG_ADC_FRAMECNT 0xd34 + +#define DAC2_SRTODIV(x) (((1411200 + (x) / 2) / (x) - 2) & 0x1fff) +#define DAC2_DIVTOSR(x) (1411200 / ((x) + 2)) + +#define CTRL_ADC_STOP 0x80000000 /* 1 = ADC stopped */ +#define CTRL_XCTL1 0x40000000 /* SERR pin if enabled */ +#define CTRL_OPEN 0x20000000 /* no function, can be read and + * written */ +#define CTRL_PCLKDIV 0x1fff0000 /* ADC/DAC2 clock divider */ +#define CTRL_SH_PCLKDIV 16 +#define CTRL_MSFMTSEL 0x00008000 /* MPEG serial data fmt: 0 = Sony, 1 + * = I2S */ +#define CTRL_M_SBB 0x00004000 /* DAC2 clock: 0 = PCLKDIV, 1 = MPEG */ +#define CTRL_WTSRSEL 0x00003000 /* DAC1 clock freq: 0=5512, 1=11025, + * 2=22050, 3=44100 */ +#define CTRL_SH_WTSRSEL 12 +#define CTRL_DAC_SYNC 0x00000800 /* 1 = DAC2 runs off DAC1 clock */ +#define CTRL_CCB_INTRM 0x00000400 /* 1 = CCB "voice" ints enabled */ +#define CTRL_M_CB 0x00000200 /* recording source: 0 = ADC, 1 = + * MPEG */ +#define CTRL_XCTL0 0x00000100 /* 0 = Line in, 1 = Line out */ +#define CTRL_BREQ 0x00000080 /* 1 = test mode (internal mem test) */ +#define CTRL_DAC1_EN 0x00000040 /* enable DAC1 */ +#define CTRL_DAC2_EN 0x00000020 /* enable DAC2 */ +#define CTRL_ADC_EN 0x00000010 /* enable ADC */ +#define CTRL_UART_EN 0x00000008 /* enable MIDI uart */ +#define CTRL_JYSTK_EN 0x00000004 /* enable Joystick port (presumably + * at address 0x200) */ +#define CTRL_CDC_EN 0x00000002 /* enable serial (CODEC) interface */ +#define CTRL_SERR_DIS 0x00000001 /* 1 = disable PCI SERR signal */ + +#define SCTRL_P2ENDINC 0x00380000 /* */ +#define SCTRL_SH_P2ENDINC 19 +#define SCTRL_P2STINC 0x00070000 /* */ +#define SCTRL_SH_P2STINC 16 +#define SCTRL_R1LOOPSEL 0x00008000 /* 0 = loop mode */ +#define SCTRL_P2LOOPSEL 0x00004000 /* 0 = loop mode */ +#define SCTRL_P1LOOPSEL 0x00002000 /* 0 = loop mode */ +#define SCTRL_P2PAUSE 0x00001000 /* 1 = pause mode */ +#define SCTRL_P1PAUSE 0x00000800 /* 1 = pause mode */ +#define SCTRL_R1INTEN 0x00000400 /* enable interrupt */ +#define SCTRL_P2INTEN 0x00000200 /* enable interrupt */ +#define SCTRL_P1INTEN 0x00000100 /* enable interrupt */ +#define SCTRL_P1SCTRLD 0x00000080 /* reload sample count register for + * DAC1 */ +#define SCTRL_P2DACSEN 0x00000040 /* 1 = DAC2 play back last sample + * when disabled */ +#define SCTRL_R1SEB 0x00000020 /* 1 = 16bit */ +#define SCTRL_R1SMB 0x00000010 /* 1 = stereo */ +#define SCTRL_R1FMT 0x00000030 /* format mask */ +#define SCTRL_SH_R1FMT 4 +#define SCTRL_P2SEB 0x00000008 /* 1 = 16bit */ +#define SCTRL_P2SMB 0x00000004 /* 1 = stereo */ +#define SCTRL_P2FMT 0x0000000c /* format mask */ +#define SCTRL_SH_P2FMT 2 +#define SCTRL_P1SEB 0x00000002 /* 1 = 16bit */ +#define SCTRL_P1SMB 0x00000001 /* 1 = stereo */ +#define SCTRL_P1FMT 0x00000003 /* format mask */ +#define SCTRL_SH_P1FMT 0 + +#define STAT_INTR 0x80000000 /* wired or of all interrupt bits */ +#define STAT_CSTAT 0x00000400 /* 1 = codec busy or codec write in + * progress */ +#define STAT_CBUSY 0x00000200 /* 1 = codec busy */ +#define STAT_CWRIP 0x00000100 /* 1 = codec write in progress */ +#define STAT_VC 0x00000060 /* CCB int source, 0=DAC1, 1=DAC2, + * 2=ADC, 3=undef */ +#define STAT_SH_VC 5 +#define STAT_MCCB 0x00000010 /* CCB int pending */ +#define STAT_UART 0x00000008 /* UART int pending */ +#define STAT_DAC1 0x00000004 /* DAC1 int pending */ +#define STAT_DAC2 0x00000002 /* DAC2 int pending */ +#define STAT_ADC 0x00000001 /* ADC int pending */ + +#define CODEC_OMIX1 0x10 +#define CODEC_OMIX2 0x11 +#define CODEC_LIMIX1 0x12 +#define CODEC_RIMIX1 0x13 +#define CODEC_LIMIX2 0x14 +#define CODEC_RIMIX2 0x15 +#define CODEC_RES_PD 0x16 +#define CODEC_CSEL 0x17 +#define CODEC_ADSEL 0x18 +#define CODEC_MGAIN 0x19 + +#define ES_BUFFSIZE 0x20000 /* We're PCI! Use a large buffer */ + +#endif |
