diff options
Diffstat (limited to 'sys/dev/mrsas/mrsas.c')
-rw-r--r-- | sys/dev/mrsas/mrsas.c | 3672 |
1 files changed, 3672 insertions, 0 deletions
diff --git a/sys/dev/mrsas/mrsas.c b/sys/dev/mrsas/mrsas.c new file mode 100644 index 0000000..b740128 --- /dev/null +++ b/sys/dev/mrsas/mrsas.c @@ -0,0 +1,3672 @@ +/* + * Copyright (c) 2014, LSI Corp. + * All rights reserved. + * Author: Marian Choy + * Support: freebsdraid@lsi.com + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name of the <ORGANIZATION> nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * The views and conclusions contained in the software and documentation + * are those of the authors and should not be interpreted as representing + * official policies,either expressed or implied, of the FreeBSD Project. + * + * Send feedback to: <megaraidfbsd@lsi.com> + * Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035 + * ATTN: MegaRaid FreeBSD + * + */ + +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +#include <dev/mrsas/mrsas.h> +#include <dev/mrsas/mrsas_ioctl.h> + +#include <cam/cam.h> +#include <cam/cam_ccb.h> + +#include <sys/sysctl.h> +#include <sys/types.h> +#include <sys/kthread.h> +#include <sys/taskqueue.h> + + +/* + * Function prototypes + */ +static d_open_t mrsas_open; +static d_close_t mrsas_close; +static d_read_t mrsas_read; +static d_write_t mrsas_write; +static d_ioctl_t mrsas_ioctl; + +static struct mrsas_ident *mrsas_find_ident(device_t); +static void mrsas_shutdown_ctlr(struct mrsas_softc *sc, u_int32_t opcode); +static void mrsas_flush_cache(struct mrsas_softc *sc); +static void mrsas_reset_reply_desc(struct mrsas_softc *sc); +static void mrsas_ocr_thread(void *arg); +static int mrsas_get_map_info(struct mrsas_softc *sc); +static int mrsas_get_ld_map_info(struct mrsas_softc *sc); +static int mrsas_sync_map_info(struct mrsas_softc *sc); +static int mrsas_get_pd_list(struct mrsas_softc *sc); +static int mrsas_get_ld_list(struct mrsas_softc *sc); +static int mrsas_setup_irq(struct mrsas_softc *sc); +static int mrsas_alloc_mem(struct mrsas_softc *sc); +static int mrsas_init_fw(struct mrsas_softc *sc); +static int mrsas_setup_raidmap(struct mrsas_softc *sc); +static int mrsas_complete_cmd(struct mrsas_softc *sc); +static int mrsas_clear_intr(struct mrsas_softc *sc); +static int mrsas_get_ctrl_info(struct mrsas_softc *sc, + struct mrsas_ctrl_info *ctrl_info); +static int mrsas_issue_blocked_abort_cmd(struct mrsas_softc *sc, + struct mrsas_mfi_cmd *cmd_to_abort); +u_int32_t mrsas_read_reg(struct mrsas_softc *sc, int offset); +u_int8_t mrsas_build_mptmfi_passthru(struct mrsas_softc *sc, + struct mrsas_mfi_cmd *mfi_cmd); +int mrsas_transition_to_ready(struct mrsas_softc *sc, int ocr); +int mrsas_init_adapter(struct mrsas_softc *sc); +int mrsas_alloc_mpt_cmds(struct mrsas_softc *sc); +int mrsas_alloc_ioc_cmd(struct mrsas_softc *sc); +int mrsas_alloc_ctlr_info_cmd(struct mrsas_softc *sc); +int mrsas_ioc_init(struct mrsas_softc *sc); +int mrsas_bus_scan(struct mrsas_softc *sc); +int mrsas_issue_dcmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd); +int mrsas_issue_polled(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd); +int mrsas_reset_ctrl(struct mrsas_softc *sc); +int mrsas_wait_for_outstanding(struct mrsas_softc *sc); +int mrsas_issue_blocked_cmd(struct mrsas_softc *sc, + struct mrsas_mfi_cmd *cmd); +int mrsas_alloc_tmp_dcmd(struct mrsas_softc *sc, struct mrsas_tmp_dcmd *tcmd, + int size); +void mrsas_release_mfi_cmd(struct mrsas_mfi_cmd *cmd); +void mrsas_wakeup(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd); +void mrsas_complete_aen(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd); +void mrsas_complete_abort(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd); +void mrsas_disable_intr(struct mrsas_softc *sc); +void mrsas_enable_intr(struct mrsas_softc *sc); +void mrsas_free_ioc_cmd(struct mrsas_softc *sc); +void mrsas_free_mem(struct mrsas_softc *sc); +void mrsas_free_tmp_dcmd(struct mrsas_tmp_dcmd *tmp); +void mrsas_isr(void *arg); +void mrsas_teardown_intr(struct mrsas_softc *sc); +void mrsas_addr_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error); +void mrsas_kill_hba (struct mrsas_softc *sc); +void mrsas_aen_handler(struct mrsas_softc *sc); +void mrsas_write_reg(struct mrsas_softc *sc, int offset, + u_int32_t value); +void mrsas_fire_cmd(struct mrsas_softc *sc, u_int32_t req_desc_lo, + u_int32_t req_desc_hi); +void mrsas_free_ctlr_info_cmd(struct mrsas_softc *sc); +void mrsas_complete_mptmfi_passthru(struct mrsas_softc *sc, + struct mrsas_mfi_cmd *cmd, u_int8_t status); +void mrsas_map_mpt_cmd_status(struct mrsas_mpt_cmd *cmd, u_int8_t status, + u_int8_t extStatus); +struct mrsas_mfi_cmd* mrsas_get_mfi_cmd(struct mrsas_softc *sc); +MRSAS_REQUEST_DESCRIPTOR_UNION * mrsas_build_mpt_cmd(struct mrsas_softc *sc, + struct mrsas_mfi_cmd *cmd); + +extern int mrsas_cam_attach(struct mrsas_softc *sc); +extern void mrsas_cam_detach(struct mrsas_softc *sc); +extern void mrsas_cmd_done(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd); +extern void mrsas_free_frame(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd); +extern int mrsas_alloc_mfi_cmds(struct mrsas_softc *sc); +extern void mrsas_release_mpt_cmd(struct mrsas_mpt_cmd *cmd); +extern struct mrsas_mpt_cmd *mrsas_get_mpt_cmd(struct mrsas_softc *sc); +extern int mrsas_passthru(struct mrsas_softc *sc, void *arg); +extern uint8_t MR_ValidateMapInfo(struct mrsas_softc *sc); +extern u_int16_t MR_GetLDTgtId(u_int32_t ld, MR_FW_RAID_MAP_ALL *map); +extern MR_LD_RAID *MR_LdRaidGet(u_int32_t ld, MR_FW_RAID_MAP_ALL *map); +extern void mrsas_xpt_freeze(struct mrsas_softc *sc); +extern void mrsas_xpt_release(struct mrsas_softc *sc); +extern MRSAS_REQUEST_DESCRIPTOR_UNION *mrsas_get_request_desc(struct mrsas_softc *sc, + u_int16_t index); +extern int mrsas_bus_scan_sim(struct mrsas_softc *sc, struct cam_sim *sim); +static int mrsas_alloc_evt_log_info_cmd(struct mrsas_softc *sc); +static void mrsas_free_evt_log_info_cmd(struct mrsas_softc *sc); +SYSCTL_NODE(_hw, OID_AUTO, mrsas, CTLFLAG_RD, 0, "MRSAS Driver Parameters"); + + +/** + * PCI device struct and table + * + */ +typedef struct mrsas_ident { + uint16_t vendor; + uint16_t device; + uint16_t subvendor; + uint16_t subdevice; + const char *desc; +} MRSAS_CTLR_ID; + +MRSAS_CTLR_ID device_table[] = { + {0x1000, MRSAS_TBOLT, 0xffff, 0xffff, "LSI Thunderbolt SAS Controller"}, + {0x1000, MRSAS_INVADER, 0xffff, 0xffff, "LSI Invader SAS Controller"}, + {0x1000, MRSAS_FURY, 0xffff, 0xffff, "LSI Fury SAS Controller"}, + {0, 0, 0, 0, NULL} +}; + +/** + * Character device entry points + * + */ +static struct cdevsw mrsas_cdevsw = { + .d_version = D_VERSION, + .d_open = mrsas_open, + .d_close = mrsas_close, + .d_read = mrsas_read, + .d_write = mrsas_write, + .d_ioctl = mrsas_ioctl, + .d_name = "mrsas", +}; + +MALLOC_DEFINE(M_MRSAS, "mrsasbuf", "Buffers for the MRSAS driver"); + +/** + * In the cdevsw routines, we find our softc by using the si_drv1 member + * of struct cdev. We set this variable to point to our softc in our + * attach routine when we create the /dev entry. + */ +int +mrsas_open(struct cdev *dev, int oflags, int devtype, d_thread_t *td) +{ + struct mrsas_softc *sc; + + sc = dev->si_drv1; + return (0); +} + +int +mrsas_close(struct cdev *dev, int fflag, int devtype, d_thread_t *td) +{ + struct mrsas_softc *sc; + + sc = dev->si_drv1; + return (0); +} + +int +mrsas_read(struct cdev *dev, struct uio *uio, int ioflag) +{ + struct mrsas_softc *sc; + + sc = dev->si_drv1; + return (0); +} +int +mrsas_write(struct cdev *dev, struct uio *uio, int ioflag) +{ + struct mrsas_softc *sc; + + sc = dev->si_drv1; + return (0); +} + +/** + * Register Read/Write Functions + * + */ +void +mrsas_write_reg(struct mrsas_softc *sc, int offset, + u_int32_t value) +{ + bus_space_tag_t bus_tag = sc->bus_tag; + bus_space_handle_t bus_handle = sc->bus_handle; + + bus_space_write_4(bus_tag, bus_handle, offset, value); +} + +u_int32_t +mrsas_read_reg(struct mrsas_softc *sc, int offset) +{ + bus_space_tag_t bus_tag = sc->bus_tag; + bus_space_handle_t bus_handle = sc->bus_handle; + + return((u_int32_t)bus_space_read_4(bus_tag, bus_handle, offset)); +} + + +/** + * Interrupt Disable/Enable/Clear Functions + * + */ +void mrsas_disable_intr(struct mrsas_softc *sc) +{ + u_int32_t mask = 0xFFFFFFFF; + u_int32_t status; + + mrsas_write_reg(sc, offsetof(mrsas_reg_set, outbound_intr_mask), mask); + /* Dummy read to force pci flush */ + status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_intr_mask)); +} + +void mrsas_enable_intr(struct mrsas_softc *sc) +{ + u_int32_t mask = MFI_FUSION_ENABLE_INTERRUPT_MASK; + u_int32_t status; + + mrsas_write_reg(sc, offsetof(mrsas_reg_set, outbound_intr_status), ~0); + status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_intr_status)); + + mrsas_write_reg(sc, offsetof(mrsas_reg_set, outbound_intr_mask), ~mask); + status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_intr_mask)); +} + +static int mrsas_clear_intr(struct mrsas_softc *sc) +{ + u_int32_t status, fw_status, fw_state; + + /* Read received interrupt */ + status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_intr_status)); + + /* If FW state change interrupt is received, write to it again to clear */ + if (status & MRSAS_FW_STATE_CHNG_INTERRUPT) { + fw_status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, + outbound_scratch_pad)); + fw_state = fw_status & MFI_STATE_MASK; + if (fw_state == MFI_STATE_FAULT) { + device_printf(sc->mrsas_dev, "FW is in FAULT state!\n"); + if(sc->ocr_thread_active) + wakeup(&sc->ocr_chan); + } + mrsas_write_reg(sc, offsetof(mrsas_reg_set, outbound_intr_status), status); + mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_intr_status)); + return(1); + } + + /* Not our interrupt, so just return */ + if (!(status & MFI_FUSION_ENABLE_INTERRUPT_MASK)) + return(0); + + /* We got a reply interrupt */ + return(1); +} + +/** + * PCI Support Functions + * + */ +static struct mrsas_ident * mrsas_find_ident(device_t dev) +{ + struct mrsas_ident *pci_device; + + for (pci_device=device_table; pci_device->vendor != 0; pci_device++) + { + if ((pci_device->vendor == pci_get_vendor(dev)) && + (pci_device->device == pci_get_device(dev)) && + ((pci_device->subvendor == pci_get_subvendor(dev)) || + (pci_device->subvendor == 0xffff)) && + ((pci_device->subdevice == pci_get_subdevice(dev)) || + (pci_device->subdevice == 0xffff))) + return (pci_device); + } + return (NULL); +} + +static int mrsas_probe(device_t dev) +{ + static u_int8_t first_ctrl = 1; + struct mrsas_ident *id; + + if ((id = mrsas_find_ident(dev)) != NULL) { + if (first_ctrl) { + printf("LSI MegaRAID SAS FreeBSD mrsas driver version: %s\n", MRSAS_VERSION); + first_ctrl = 0; + } + device_set_desc(dev, id->desc); + /* between BUS_PROBE_DEFAULT and BUS_PROBE_LOW_PRIORITY */ + return (-30); + } + return (ENXIO); +} + +/** + * mrsas_setup_sysctl: setup sysctl values for mrsas + * input: Adapter instance soft state + * + * Setup sysctl entries for mrsas driver. + */ +static void +mrsas_setup_sysctl(struct mrsas_softc *sc) +{ + struct sysctl_ctx_list *sysctl_ctx = NULL; + struct sysctl_oid *sysctl_tree = NULL; + char tmpstr[80], tmpstr2[80]; + + /* + * Setup the sysctl variable so the user can change the debug level + * on the fly. + */ + snprintf(tmpstr, sizeof(tmpstr), "MRSAS controller %d", + device_get_unit(sc->mrsas_dev)); + snprintf(tmpstr2, sizeof(tmpstr2), "%d", device_get_unit(sc->mrsas_dev)); + + sysctl_ctx = device_get_sysctl_ctx(sc->mrsas_dev); + if (sysctl_ctx != NULL) + sysctl_tree = device_get_sysctl_tree(sc->mrsas_dev); + + if (sysctl_tree == NULL) { + sysctl_ctx_init(&sc->sysctl_ctx); + sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx, + SYSCTL_STATIC_CHILDREN(_hw_mrsas), OID_AUTO, tmpstr2, + CTLFLAG_RD, 0, tmpstr); + if (sc->sysctl_tree == NULL) + return; + sysctl_ctx = &sc->sysctl_ctx; + sysctl_tree = sc->sysctl_tree; + } + SYSCTL_ADD_UINT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), + OID_AUTO, "disable_ocr", CTLFLAG_RW, &sc->disableOnlineCtrlReset, 0, + "Disable the use of OCR"); + + SYSCTL_ADD_STRING(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), + OID_AUTO, "driver_version", CTLFLAG_RD, MRSAS_VERSION, + strlen(MRSAS_VERSION), "driver version"); + + SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), + OID_AUTO, "reset_count", CTLFLAG_RD, + &sc->reset_count, 0, "number of ocr from start of the day"); + + SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), + OID_AUTO, "fw_outstanding", CTLFLAG_RD, + &sc->fw_outstanding, 0, "FW outstanding commands"); + + SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), + OID_AUTO, "io_cmds_highwater", CTLFLAG_RD, + &sc->io_cmds_highwater, 0, "Max FW outstanding commands"); + + SYSCTL_ADD_UINT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), + OID_AUTO, "mrsas_debug", CTLFLAG_RW, &sc->mrsas_debug, 0, + "Driver debug level"); + + SYSCTL_ADD_UINT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), + OID_AUTO, "mrsas_io_timeout", CTLFLAG_RW, &sc->mrsas_io_timeout, + 0, "Driver IO timeout value in mili-second."); + + SYSCTL_ADD_UINT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), + OID_AUTO, "mrsas_fw_fault_check_delay", CTLFLAG_RW, + &sc->mrsas_fw_fault_check_delay, + 0, "FW fault check thread delay in seconds. <default is 1 sec>"); + + SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), + OID_AUTO, "reset_in_progress", CTLFLAG_RD, + &sc->reset_in_progress, 0, "ocr in progress status"); + +} + +/** + * mrsas_get_tunables: get tunable parameters. + * input: Adapter instance soft state + * + * Get tunable parameters. This will help to debug driver at boot time. + */ +static void +mrsas_get_tunables(struct mrsas_softc *sc) +{ + char tmpstr[80]; + + /* XXX default to some debugging for now */ + sc->mrsas_debug = MRSAS_FAULT; + sc->mrsas_io_timeout = MRSAS_IO_TIMEOUT; + sc->mrsas_fw_fault_check_delay = 1; + sc->reset_count = 0; + sc->reset_in_progress = 0; + + /* + * Grab the global variables. + */ + TUNABLE_INT_FETCH("hw.mrsas.debug_level", &sc->mrsas_debug); + + /* Grab the unit-instance variables */ + snprintf(tmpstr, sizeof(tmpstr), "dev.mrsas.%d.debug_level", + device_get_unit(sc->mrsas_dev)); + TUNABLE_INT_FETCH(tmpstr, &sc->mrsas_debug); +} + +/** + * mrsas_alloc_evt_log_info cmd: Allocates memory to get event log information. + * Used to get sequence number at driver load time. + * input: Adapter soft state + * + * Allocates DMAable memory for the event log info internal command. + */ +int mrsas_alloc_evt_log_info_cmd(struct mrsas_softc *sc) +{ + int el_info_size; + + /* Allocate get event log info command */ + el_info_size = sizeof(struct mrsas_evt_log_info); + if (bus_dma_tag_create( sc->mrsas_parent_tag, // parent + 1, 0, // algnmnt, boundary + BUS_SPACE_MAXADDR_32BIT,// lowaddr + BUS_SPACE_MAXADDR, // highaddr + NULL, NULL, // filter, filterarg + el_info_size, // maxsize + 1, // msegments + el_info_size, // maxsegsize + BUS_DMA_ALLOCNOW, // flags + NULL, NULL, // lockfunc, lockarg + &sc->el_info_tag)) { + device_printf(sc->mrsas_dev, "Cannot allocate event log info tag\n"); + return (ENOMEM); + } + if (bus_dmamem_alloc(sc->el_info_tag, (void **)&sc->el_info_mem, + BUS_DMA_NOWAIT, &sc->el_info_dmamap)) { + device_printf(sc->mrsas_dev, "Cannot allocate event log info cmd mem\n"); + return (ENOMEM); + } + if (bus_dmamap_load(sc->el_info_tag, sc->el_info_dmamap, + sc->el_info_mem, el_info_size, mrsas_addr_cb, + &sc->el_info_phys_addr, BUS_DMA_NOWAIT)) { + device_printf(sc->mrsas_dev, "Cannot load event log info cmd mem\n"); + return (ENOMEM); + } + + memset(sc->el_info_mem, 0, el_info_size); + return (0); +} + +/** + * mrsas_free_evt_info_cmd: Free memory for Event log info command + * input: Adapter soft state + * + * Deallocates memory for the event log info internal command. + */ +void mrsas_free_evt_log_info_cmd(struct mrsas_softc *sc) +{ + if (sc->el_info_phys_addr) + bus_dmamap_unload(sc->el_info_tag, sc->el_info_dmamap); + if (sc->el_info_mem != NULL) + bus_dmamem_free(sc->el_info_tag, sc->el_info_mem, sc->el_info_dmamap); + if (sc->el_info_tag != NULL) + bus_dma_tag_destroy(sc->el_info_tag); +} + +/** + * mrsas_get_seq_num: Get latest event sequence number + * @sc: Adapter soft state + * @eli: Firmware event log sequence number information. + * Firmware maintains a log of all events in a non-volatile area. + * Driver get the sequence number using DCMD + * "MR_DCMD_CTRL_EVENT_GET_INFO" at driver load time. + */ + +static int +mrsas_get_seq_num(struct mrsas_softc *sc, + struct mrsas_evt_log_info *eli) +{ + struct mrsas_mfi_cmd *cmd; + struct mrsas_dcmd_frame *dcmd; + + cmd = mrsas_get_mfi_cmd(sc); + + if (!cmd) { + device_printf(sc->mrsas_dev, "Failed to get a free cmd\n"); + return -ENOMEM; + } + + dcmd = &cmd->frame->dcmd; + + if (mrsas_alloc_evt_log_info_cmd(sc) != SUCCESS) { + device_printf(sc->mrsas_dev, "Cannot allocate evt log info cmd\n"); + mrsas_release_mfi_cmd(cmd); + return -ENOMEM; + } + + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0x0; + dcmd->sge_count = 1; + dcmd->flags = MFI_FRAME_DIR_READ; + dcmd->timeout = 0; + dcmd->pad_0 = 0; + dcmd->data_xfer_len = sizeof(struct mrsas_evt_log_info); + dcmd->opcode = MR_DCMD_CTRL_EVENT_GET_INFO; + dcmd->sgl.sge32[0].phys_addr = sc->el_info_phys_addr; + dcmd->sgl.sge32[0].length = sizeof(struct mrsas_evt_log_info); + + mrsas_issue_blocked_cmd(sc, cmd); + + /* + * Copy the data back into callers buffer + */ + memcpy(eli, sc->el_info_mem, sizeof(struct mrsas_evt_log_info)); + mrsas_free_evt_log_info_cmd(sc); + mrsas_release_mfi_cmd(cmd); + + return 0; +} + + +/** + * mrsas_register_aen: Register for asynchronous event notification + * @sc: Adapter soft state + * @seq_num: Starting sequence number + * @class_locale: Class of the event + * This function subscribes for events beyond the @seq_num + * and type @class_locale. + * + * */ +static int +mrsas_register_aen(struct mrsas_softc *sc, u_int32_t seq_num, + u_int32_t class_locale_word) +{ + int ret_val; + struct mrsas_mfi_cmd *cmd; + struct mrsas_dcmd_frame *dcmd; + union mrsas_evt_class_locale curr_aen; + union mrsas_evt_class_locale prev_aen; + +/* + * If there an AEN pending already (aen_cmd), check if the + * class_locale of that pending AEN is inclusive of the new + * AEN request we currently have. If it is, then we don't have + * to do anything. In other words, whichever events the current + * AEN request is subscribing to, have already been subscribed + * to. + * If the old_cmd is _not_ inclusive, then we have to abort + * that command, form a class_locale that is superset of both + * old and current and re-issue to the FW + * */ + + curr_aen.word = class_locale_word; + + if (sc->aen_cmd) { + + prev_aen.word = sc->aen_cmd->frame->dcmd.mbox.w[1]; + +/* + * A class whose enum value is smaller is inclusive of all + * higher values. If a PROGRESS (= -1) was previously + * registered, then a new registration requests for higher + * classes need not be sent to FW. They are automatically + * included. + * Locale numbers don't have such hierarchy. They are bitmap values + */ + if ((prev_aen.members.class <= curr_aen.members.class) && + !((prev_aen.members.locale & curr_aen.members.locale) ^ + curr_aen.members.locale)) { + /* + * Previously issued event registration includes + * current request. Nothing to do. + */ + return 0; + } else { + curr_aen.members.locale |= prev_aen.members.locale; + + if (prev_aen.members.class < curr_aen.members.class) + curr_aen.members.class = prev_aen.members.class; + + sc->aen_cmd->abort_aen = 1; + ret_val = mrsas_issue_blocked_abort_cmd(sc, + sc->aen_cmd); + + if (ret_val) { + printf("mrsas: Failed to abort " + "previous AEN command\n"); + return ret_val; + } + } + } + + cmd = mrsas_get_mfi_cmd(sc); + + if (!cmd) + return -ENOMEM; + + dcmd = &cmd->frame->dcmd; + + memset(sc->evt_detail_mem, 0, sizeof(struct mrsas_evt_detail)); + +/* + * Prepare DCMD for aen registration + */ + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0x0; + dcmd->sge_count = 1; + dcmd->flags = MFI_FRAME_DIR_READ; + dcmd->timeout = 0; + dcmd->pad_0 = 0; + dcmd->data_xfer_len = sizeof(struct mrsas_evt_detail); + dcmd->opcode = MR_DCMD_CTRL_EVENT_WAIT; + dcmd->mbox.w[0] = seq_num; + sc->last_seq_num = seq_num; + dcmd->mbox.w[1] = curr_aen.word; + dcmd->sgl.sge32[0].phys_addr = (u_int32_t) sc->evt_detail_phys_addr; + dcmd->sgl.sge32[0].length = sizeof(struct mrsas_evt_detail); + + if (sc->aen_cmd != NULL) { + mrsas_release_mfi_cmd(cmd); + return 0; + } + + /* + * Store reference to the cmd used to register for AEN. When an + * application wants us to register for AEN, we have to abort this + * cmd and re-register with a new EVENT LOCALE supplied by that app + */ + sc->aen_cmd = cmd; + + /* + Issue the aen registration frame + */ + if (mrsas_issue_dcmd(sc, cmd)){ + device_printf(sc->mrsas_dev, "Cannot issue AEN DCMD command.\n"); + return(1); + } + + return 0; +} +/** + * mrsas_start_aen - Subscribes to AEN during driver load time + * @instance: Adapter soft state + */ +static int mrsas_start_aen(struct mrsas_softc *sc) +{ + struct mrsas_evt_log_info eli; + union mrsas_evt_class_locale class_locale; + + + /* Get the latest sequence number from FW*/ + + memset(&eli, 0, sizeof(eli)); + + if (mrsas_get_seq_num(sc, &eli)) + return -1; + + /* Register AEN with FW for latest sequence number plus 1*/ + class_locale.members.reserved = 0; + class_locale.members.locale = MR_EVT_LOCALE_ALL; + class_locale.members.class = MR_EVT_CLASS_DEBUG; + + return mrsas_register_aen(sc, eli.newest_seq_num + 1, + class_locale.word); +} + +/** + * mrsas_attach: PCI entry point + * input: device struct pointer + * + * Performs setup of PCI and registers, initializes mutexes and + * linked lists, registers interrupts and CAM, and initializes + * the adapter/controller to its proper state. + */ +static int mrsas_attach(device_t dev) +{ + struct mrsas_softc *sc = device_get_softc(dev); + uint32_t cmd, bar, error; + + /* Look up our softc and initialize its fields. */ + sc->mrsas_dev = dev; + sc->device_id = pci_get_device(dev); + + mrsas_get_tunables(sc); + + /* + * Set up PCI and registers + */ + cmd = pci_read_config(dev, PCIR_COMMAND, 2); + if ( (cmd & PCIM_CMD_PORTEN) == 0) { + return (ENXIO); + } + /* Force the busmaster enable bit on. */ + cmd |= PCIM_CMD_BUSMASTEREN; + pci_write_config(dev, PCIR_COMMAND, cmd, 2); + + //bar = pci_read_config(dev, MRSAS_PCI_BAR0, 4); + bar = pci_read_config(dev, MRSAS_PCI_BAR1, 4); + + sc->reg_res_id = MRSAS_PCI_BAR1; /* BAR1 offset */ + if ((sc->reg_res = bus_alloc_resource(dev, SYS_RES_MEMORY, + &(sc->reg_res_id), 0, ~0, 1, RF_ACTIVE)) + == NULL) { + device_printf(dev, "Cannot allocate PCI registers\n"); + goto attach_fail; + } + sc->bus_tag = rman_get_bustag(sc->reg_res); + sc->bus_handle = rman_get_bushandle(sc->reg_res); + + /* Intialize mutexes */ + mtx_init(&sc->sim_lock, "mrsas_sim_lock", NULL, MTX_DEF); + mtx_init(&sc->pci_lock, "mrsas_pci_lock", NULL, MTX_DEF); + mtx_init(&sc->io_lock, "mrsas_io_lock", NULL, MTX_DEF); + mtx_init(&sc->aen_lock, "mrsas_aen_lock", NULL, MTX_DEF); + mtx_init(&sc->ioctl_lock, "mrsas_ioctl_lock", NULL, MTX_SPIN); + mtx_init(&sc->mpt_cmd_pool_lock, "mrsas_mpt_cmd_pool_lock", NULL, MTX_DEF); + mtx_init(&sc->mfi_cmd_pool_lock, "mrsas_mfi_cmd_pool_lock", NULL, MTX_DEF); + mtx_init(&sc->raidmap_lock, "mrsas_raidmap_lock", NULL, MTX_DEF); + + /* Intialize linked list */ + TAILQ_INIT(&sc->mrsas_mpt_cmd_list_head); + TAILQ_INIT(&sc->mrsas_mfi_cmd_list_head); + + atomic_set(&sc->fw_outstanding,0); + + sc->io_cmds_highwater = 0; + + /* Create a /dev entry for this device. */ + sc->mrsas_cdev = make_dev(&mrsas_cdevsw, device_get_unit(dev), UID_ROOT, + GID_OPERATOR, (S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP), "mrsas%u", + device_get_unit(dev)); + if (sc->mrsas_cdev) + sc->mrsas_cdev->si_drv1 = sc; + + sc->adprecovery = MRSAS_HBA_OPERATIONAL; + sc->UnevenSpanSupport = 0; + + /* Initialize Firmware */ + if (mrsas_init_fw(sc) != SUCCESS) { + goto attach_fail_fw; + } + + /* Register SCSI mid-layer */ + if ((mrsas_cam_attach(sc) != SUCCESS)) { + goto attach_fail_cam; + } + + /* Register IRQs */ + if (mrsas_setup_irq(sc) != SUCCESS) { + goto attach_fail_irq; + } + + /* Enable Interrupts */ + mrsas_enable_intr(sc); + + error = mrsas_kproc_create(mrsas_ocr_thread, sc, + &sc->ocr_thread, 0, 0, "mrsas_ocr%d", + device_get_unit(sc->mrsas_dev)); + if (error) { + printf("Error %d starting rescan thread\n", error); + goto attach_fail_irq; + } + + mrsas_setup_sysctl(sc); + + /* Initiate AEN (Asynchronous Event Notification)*/ + + if (mrsas_start_aen(sc)) { + printf("Error: start aen failed\n"); + goto fail_start_aen; + } + + return (0); + +fail_start_aen: +attach_fail_irq: + mrsas_teardown_intr(sc); +attach_fail_cam: + mrsas_cam_detach(sc); +attach_fail_fw: +//attach_fail_raidmap: + mrsas_free_mem(sc); + mtx_destroy(&sc->sim_lock); + mtx_destroy(&sc->aen_lock); + mtx_destroy(&sc->pci_lock); + mtx_destroy(&sc->io_lock); + mtx_destroy(&sc->ioctl_lock); + mtx_destroy(&sc->mpt_cmd_pool_lock); + mtx_destroy(&sc->mfi_cmd_pool_lock); + mtx_destroy(&sc->raidmap_lock); +attach_fail: + destroy_dev(sc->mrsas_cdev); + if (sc->reg_res){ + bus_release_resource(sc->mrsas_dev, SYS_RES_MEMORY, + sc->reg_res_id, sc->reg_res); + } + return (ENXIO); +} + +/** + * mrsas_detach: De-allocates and teardown resources + * input: device struct pointer + * + * This function is the entry point for device disconnect and detach. It + * performs memory de-allocations, shutdown of the controller and various + * teardown and destroy resource functions. + */ +static int mrsas_detach(device_t dev) +{ + struct mrsas_softc *sc; + int i = 0; + + sc = device_get_softc(dev); + sc->remove_in_progress = 1; + if(sc->ocr_thread_active) + wakeup(&sc->ocr_chan); + while(sc->reset_in_progress){ + i++; + if (!(i % MRSAS_RESET_NOTICE_INTERVAL)) { + mrsas_dprint(sc, MRSAS_INFO, + "[%2d]waiting for ocr to be finished\n",i); + } + pause("mr_shutdown", hz); + } + i = 0; + while(sc->ocr_thread_active){ + i++; + if (!(i % MRSAS_RESET_NOTICE_INTERVAL)) { + mrsas_dprint(sc, MRSAS_INFO, + "[%2d]waiting for " + "mrsas_ocr thread to quit ocr %d\n",i, + sc->ocr_thread_active); + } + pause("mr_shutdown", hz); + } + mrsas_flush_cache(sc); + mrsas_shutdown_ctlr(sc, MR_DCMD_CTRL_SHUTDOWN); + mrsas_disable_intr(sc); + mrsas_cam_detach(sc); + mrsas_teardown_intr(sc); + mrsas_free_mem(sc); + mtx_destroy(&sc->sim_lock); + mtx_destroy(&sc->aen_lock); + mtx_destroy(&sc->pci_lock); + mtx_destroy(&sc->io_lock); + mtx_destroy(&sc->ioctl_lock); + mtx_destroy(&sc->mpt_cmd_pool_lock); + mtx_destroy(&sc->mfi_cmd_pool_lock); + mtx_destroy(&sc->raidmap_lock); + if (sc->reg_res){ + bus_release_resource(sc->mrsas_dev, + SYS_RES_MEMORY, sc->reg_res_id, sc->reg_res); + } + destroy_dev(sc->mrsas_cdev); + if (sc->sysctl_tree != NULL) + sysctl_ctx_free(&sc->sysctl_ctx); + return (0); +} + +/** + * mrsas_free_mem: Frees allocated memory + * input: Adapter instance soft state + * + * This function is called from mrsas_detach() to free previously allocated + * memory. + */ +void mrsas_free_mem(struct mrsas_softc *sc) +{ + int i; + u_int32_t max_cmd; + struct mrsas_mfi_cmd *mfi_cmd; + struct mrsas_mpt_cmd *mpt_cmd; + + /* + * Free RAID map memory + */ + for (i=0; i < 2; i++) + { + if (sc->raidmap_phys_addr[i]) + bus_dmamap_unload(sc->raidmap_tag[i], sc->raidmap_dmamap[i]); + if (sc->raidmap_mem[i] != NULL) + bus_dmamem_free(sc->raidmap_tag[i], sc->raidmap_mem[i], sc->raidmap_dmamap[i]); + if (sc->raidmap_tag[i] != NULL) + bus_dma_tag_destroy(sc->raidmap_tag[i]); + } + + /* + * Free version buffer memroy + */ + if (sc->verbuf_phys_addr) + bus_dmamap_unload(sc->verbuf_tag, sc->verbuf_dmamap); + if (sc->verbuf_mem != NULL) + bus_dmamem_free(sc->verbuf_tag, sc->verbuf_mem, sc->verbuf_dmamap); + if (sc->verbuf_tag != NULL) + bus_dma_tag_destroy(sc->verbuf_tag); + + + /* + * Free sense buffer memory + */ + if (sc->sense_phys_addr) + bus_dmamap_unload(sc->sense_tag, sc->sense_dmamap); + if (sc->sense_mem != NULL) + bus_dmamem_free(sc->sense_tag, sc->sense_mem, sc->sense_dmamap); + if (sc->sense_tag != NULL) + bus_dma_tag_destroy(sc->sense_tag); + + /* + * Free chain frame memory + */ + if (sc->chain_frame_phys_addr) + bus_dmamap_unload(sc->chain_frame_tag, sc->chain_frame_dmamap); + if (sc->chain_frame_mem != NULL) + bus_dmamem_free(sc->chain_frame_tag, sc->chain_frame_mem, sc->chain_frame_dmamap); + if (sc->chain_frame_tag != NULL) + bus_dma_tag_destroy(sc->chain_frame_tag); + + /* + * Free IO Request memory + */ + if (sc->io_request_phys_addr) + bus_dmamap_unload(sc->io_request_tag, sc->io_request_dmamap); + if (sc->io_request_mem != NULL) + bus_dmamem_free(sc->io_request_tag, sc->io_request_mem, sc->io_request_dmamap); + if (sc->io_request_tag != NULL) + bus_dma_tag_destroy(sc->io_request_tag); + + /* + * Free Reply Descriptor memory + */ + if (sc->reply_desc_phys_addr) + bus_dmamap_unload(sc->reply_desc_tag, sc->reply_desc_dmamap); + if (sc->reply_desc_mem != NULL) + bus_dmamem_free(sc->reply_desc_tag, sc->reply_desc_mem, sc->reply_desc_dmamap); + if (sc->reply_desc_tag != NULL) + bus_dma_tag_destroy(sc->reply_desc_tag); + + /* + * Free event detail memory + */ + if (sc->evt_detail_phys_addr) + bus_dmamap_unload(sc->evt_detail_tag, sc->evt_detail_dmamap); + if (sc->evt_detail_mem != NULL) + bus_dmamem_free(sc->evt_detail_tag, sc->evt_detail_mem, sc->evt_detail_dmamap); + if (sc->evt_detail_tag != NULL) + bus_dma_tag_destroy(sc->evt_detail_tag); + + /* + * Free MFI frames + */ + if (sc->mfi_cmd_list) { + for (i = 0; i < MRSAS_MAX_MFI_CMDS; i++) { + mfi_cmd = sc->mfi_cmd_list[i]; + mrsas_free_frame(sc, mfi_cmd); + } + } + if (sc->mficmd_frame_tag != NULL) + bus_dma_tag_destroy(sc->mficmd_frame_tag); + + /* + * Free MPT internal command list + */ + max_cmd = sc->max_fw_cmds; + if (sc->mpt_cmd_list) { + for (i = 0; i < max_cmd; i++) { + mpt_cmd = sc->mpt_cmd_list[i]; + bus_dmamap_destroy(sc->data_tag, mpt_cmd->data_dmamap); + free(sc->mpt_cmd_list[i], M_MRSAS); + } + free(sc->mpt_cmd_list, M_MRSAS); + sc->mpt_cmd_list = NULL; + } + + /* + * Free MFI internal command list + */ + + if (sc->mfi_cmd_list) { + for (i = 0; i < MRSAS_MAX_MFI_CMDS; i++) { + free(sc->mfi_cmd_list[i], M_MRSAS); + } + free(sc->mfi_cmd_list, M_MRSAS); + sc->mfi_cmd_list = NULL; + } + + /* + * Free request descriptor memory + */ + free(sc->req_desc, M_MRSAS); + sc->req_desc = NULL; + + /* + * Destroy parent tag + */ + if (sc->mrsas_parent_tag != NULL) + bus_dma_tag_destroy(sc->mrsas_parent_tag); +} + +/** + * mrsas_teardown_intr: Teardown interrupt + * input: Adapter instance soft state + * + * This function is called from mrsas_detach() to teardown and release + * bus interrupt resourse. + */ +void mrsas_teardown_intr(struct mrsas_softc *sc) +{ + if (sc->intr_handle) + bus_teardown_intr(sc->mrsas_dev, sc->mrsas_irq, sc->intr_handle); + if (sc->mrsas_irq != NULL) + bus_release_resource(sc->mrsas_dev, SYS_RES_IRQ, sc->irq_id, sc->mrsas_irq); + sc->intr_handle = NULL; +} + +/** + * mrsas_suspend: Suspend entry point + * input: Device struct pointer + * + * This function is the entry point for system suspend from the OS. + */ +static int mrsas_suspend(device_t dev) +{ + struct mrsas_softc *sc; + + sc = device_get_softc(dev); + return (0); +} + +/** + * mrsas_resume: Resume entry point + * input: Device struct pointer + * + * This function is the entry point for system resume from the OS. + */ +static int mrsas_resume(device_t dev) +{ + struct mrsas_softc *sc; + + sc = device_get_softc(dev); + return (0); +} + +/** + * mrsas_ioctl: IOCtl commands entry point. + * + * This function is the entry point for IOCtls from the OS. It calls the + * appropriate function for processing depending on the command received. + */ +static int +mrsas_ioctl(struct cdev *dev, u_long cmd, caddr_t arg, int flag, d_thread_t *td) +{ + struct mrsas_softc *sc; + int ret = 0, i = 0; + + sc = (struct mrsas_softc *)(dev->si_drv1); + + if (sc->remove_in_progress) { + mrsas_dprint(sc, MRSAS_INFO, + "Driver remove or shutdown called.\n"); + return ENOENT; + } + + mtx_lock_spin(&sc->ioctl_lock); + if (!sc->reset_in_progress) { + mtx_unlock_spin(&sc->ioctl_lock); + goto do_ioctl; + } + + /* Release ioclt_lock, and wait for OCR + * to be finished */ + mtx_unlock_spin(&sc->ioctl_lock); + while(sc->reset_in_progress){ + i++; + if (!(i % MRSAS_RESET_NOTICE_INTERVAL)) { + mrsas_dprint(sc, MRSAS_INFO, + "[%2d]waiting for " + "OCR to be finished %d\n",i, + sc->ocr_thread_active); + } + pause("mr_ioctl", hz); + } + +do_ioctl: + switch (cmd) { + case MRSAS_IOC_FIRMWARE_PASS_THROUGH: + ret = mrsas_passthru(sc, (void *)arg); + break; + case MRSAS_IOC_SCAN_BUS: + ret = mrsas_bus_scan(sc); + break; + } + + return (ret); +} + +/** + * mrsas_setup_irq: Set up interrupt. + * input: Adapter instance soft state + * + * This function sets up interrupts as a bus resource, with flags indicating + * resource permitting contemporaneous sharing and for resource to activate + * atomically. + */ +static int mrsas_setup_irq(struct mrsas_softc *sc) +{ + sc->irq_id = 0; + sc->mrsas_irq = bus_alloc_resource_any(sc->mrsas_dev, SYS_RES_IRQ, + &sc->irq_id, RF_SHAREABLE | RF_ACTIVE); + if (sc->mrsas_irq == NULL){ + device_printf(sc->mrsas_dev, "Cannot allocate interrupt\n"); + return (FAIL); + } + if (bus_setup_intr(sc->mrsas_dev, sc->mrsas_irq, INTR_MPSAFE|INTR_TYPE_CAM, + NULL, mrsas_isr, sc, &sc->intr_handle)) { + device_printf(sc->mrsas_dev, "Cannot set up interrupt\n"); + return (FAIL); + } + + return (0); +} + +/* + * mrsas_isr: ISR entry point + * input: argument pointer + * + * This function is the interrupt service routine entry point. There + * are two types of interrupts, state change interrupt and response + * interrupt. If an interrupt is not ours, we just return. + */ +void mrsas_isr(void *arg) +{ + struct mrsas_softc *sc = (struct mrsas_softc *)arg; + int status; + + /* Clear FW state change interrupt */ + status = mrsas_clear_intr(sc); + + /* Not our interrupt */ + if (!status) + return; + + /* If we are resetting, bail */ + if (test_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags)) { + printf(" Entered into ISR when OCR is going active. \n"); + mrsas_clear_intr(sc); + return; + } + /* Process for reply request and clear response interrupt */ + if (mrsas_complete_cmd(sc) != SUCCESS) + mrsas_clear_intr(sc); + + return; +} + +/* + * mrsas_complete_cmd: Process reply request + * input: Adapter instance soft state + * + * This function is called from mrsas_isr() to process reply request and + * clear response interrupt. Processing of the reply request entails + * walking through the reply descriptor array for the command request + * pended from Firmware. We look at the Function field to determine + * the command type and perform the appropriate action. Before we + * return, we clear the response interrupt. + */ +static int mrsas_complete_cmd(struct mrsas_softc *sc) +{ + Mpi2ReplyDescriptorsUnion_t *desc; + MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *reply_desc; + MRSAS_RAID_SCSI_IO_REQUEST *scsi_io_req; + struct mrsas_mpt_cmd *cmd_mpt; + struct mrsas_mfi_cmd *cmd_mfi; + u_int8_t arm, reply_descript_type; + u_int16_t smid, num_completed; + u_int8_t status, extStatus; + union desc_value desc_val; + PLD_LOAD_BALANCE_INFO lbinfo; + u_int32_t device_id; + int threshold_reply_count = 0; + + + /* If we have a hardware error, not need to continue */ + if (sc->adprecovery == MRSAS_HW_CRITICAL_ERROR) + return (DONE); + + desc = sc->reply_desc_mem; + desc += sc->last_reply_idx; + + reply_desc = (MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *)desc; + + desc_val.word = desc->Words; + num_completed = 0; + + reply_descript_type = reply_desc->ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; + + /* Find our reply descriptor for the command and process */ + while((desc_val.u.low != 0xFFFFFFFF) && (desc_val.u.high != 0xFFFFFFFF)) + { + smid = reply_desc->SMID; + cmd_mpt = sc->mpt_cmd_list[smid -1]; + scsi_io_req = (MRSAS_RAID_SCSI_IO_REQUEST *)cmd_mpt->io_request; + + status = scsi_io_req->RaidContext.status; + extStatus = scsi_io_req->RaidContext.exStatus; + + switch (scsi_io_req->Function) + { + case MPI2_FUNCTION_SCSI_IO_REQUEST : /*Fast Path IO.*/ + device_id = cmd_mpt->ccb_ptr->ccb_h.target_id; + lbinfo = &sc->load_balance_info[device_id]; + if (cmd_mpt->load_balance == MRSAS_LOAD_BALANCE_FLAG) { + arm = lbinfo->raid1DevHandle[0] == scsi_io_req->DevHandle ? 0 : 1; + atomic_dec(&lbinfo->scsi_pending_cmds[arm]); + cmd_mpt->load_balance &= ~MRSAS_LOAD_BALANCE_FLAG; + } + //Fall thru and complete IO + case MRSAS_MPI2_FUNCTION_LD_IO_REQUEST: + mrsas_map_mpt_cmd_status(cmd_mpt, status, extStatus); + mrsas_cmd_done(sc, cmd_mpt); + scsi_io_req->RaidContext.status = 0; + scsi_io_req->RaidContext.exStatus = 0; + atomic_dec(&sc->fw_outstanding); + break; + case MRSAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST: /*MFI command */ + cmd_mfi = sc->mfi_cmd_list[cmd_mpt->sync_cmd_idx]; + mrsas_complete_mptmfi_passthru(sc, cmd_mfi, status); + cmd_mpt->flags = 0; + mrsas_release_mpt_cmd(cmd_mpt); + break; + } + + sc->last_reply_idx++; + if (sc->last_reply_idx >= sc->reply_q_depth) + sc->last_reply_idx = 0; + + desc->Words = ~((uint64_t)0x00); /* set it back to all 0xFFFFFFFFs */ + num_completed++; + threshold_reply_count++; + + /* Get the next reply descriptor */ + if (!sc->last_reply_idx) + desc = sc->reply_desc_mem; + else + desc++; + + reply_desc = (MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *)desc; + desc_val.word = desc->Words; + + reply_descript_type = reply_desc->ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; + + if(reply_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) + break; + + /* + * Write to reply post index after completing threshold reply count + * and still there are more replies in reply queue pending to be + * completed. + */ + if (threshold_reply_count >= THRESHOLD_REPLY_COUNT) { + mrsas_write_reg(sc, offsetof(mrsas_reg_set, reply_post_host_index), + sc->last_reply_idx); + threshold_reply_count = 0; + } + } + + /* No match, just return */ + if (num_completed == 0) + return (DONE); + + /* Clear response interrupt */ + mrsas_write_reg(sc, offsetof(mrsas_reg_set, reply_post_host_index),sc->last_reply_idx); + + return(0); +} + +/* + * mrsas_map_mpt_cmd_status: Allocate DMAable memory. + * input: Adapter instance soft state + * + * This function is called from mrsas_complete_cmd(), for LD IO and FastPath IO. + * It checks the command status and maps the appropriate CAM status for the CCB. + */ +void mrsas_map_mpt_cmd_status(struct mrsas_mpt_cmd *cmd, u_int8_t status, u_int8_t extStatus) +{ + struct mrsas_softc *sc = cmd->sc; + u_int8_t *sense_data; + + switch (status) { + case MFI_STAT_OK: + cmd->ccb_ptr->ccb_h.status = CAM_REQ_CMP; + break; + case MFI_STAT_SCSI_IO_FAILED: + case MFI_STAT_SCSI_DONE_WITH_ERROR: + cmd->ccb_ptr->ccb_h.status = CAM_SCSI_STATUS_ERROR; + sense_data = (u_int8_t *)&cmd->ccb_ptr->csio.sense_data; + if (sense_data) { + /* For now just copy 18 bytes back */ + memcpy(sense_data, cmd->sense, 18); + cmd->ccb_ptr->csio.sense_len = 18; + cmd->ccb_ptr->ccb_h.status |= CAM_AUTOSNS_VALID; + } + break; + case MFI_STAT_LD_OFFLINE: + case MFI_STAT_DEVICE_NOT_FOUND: + if (cmd->ccb_ptr->ccb_h.target_lun) + cmd->ccb_ptr->ccb_h.status |= CAM_LUN_INVALID; + else + cmd->ccb_ptr->ccb_h.status |= CAM_DEV_NOT_THERE; + break; + case MFI_STAT_CONFIG_SEQ_MISMATCH: + /*send status to CAM layer to retry sending command without + * decrementing retry counter*/ + cmd->ccb_ptr->ccb_h.status |= CAM_REQUEUE_REQ; + break; + default: + device_printf(sc->mrsas_dev, "FW cmd complete status %x\n", status); + cmd->ccb_ptr->ccb_h.status = CAM_REQ_CMP_ERR; + cmd->ccb_ptr->csio.scsi_status = status; + } + return; +} + +/* + * mrsas_alloc_mem: Allocate DMAable memory. + * input: Adapter instance soft state + * + * This function creates the parent DMA tag and allocates DMAable memory. + * DMA tag describes constraints of DMA mapping. Memory allocated is mapped + * into Kernel virtual address. Callback argument is physical memory address. + */ +static int mrsas_alloc_mem(struct mrsas_softc *sc) +{ + u_int32_t verbuf_size, io_req_size, reply_desc_size, sense_size, + chain_frame_size, evt_detail_size; + + /* + * Allocate parent DMA tag + */ + if (bus_dma_tag_create(NULL, /* parent */ + 1, /* alignment */ + 0, /* boundary */ + BUS_SPACE_MAXADDR, /* lowaddr */ + BUS_SPACE_MAXADDR, /* highaddr */ + NULL, NULL, /* filter, filterarg */ + MRSAS_MAX_IO_SIZE,/* maxsize */ + MRSAS_MAX_SGL, /* nsegments */ + MRSAS_MAX_IO_SIZE,/* maxsegsize */ + 0, /* flags */ + NULL, NULL, /* lockfunc, lockarg */ + &sc->mrsas_parent_tag /* tag */ + )) { + device_printf(sc->mrsas_dev, "Cannot allocate parent DMA tag\n"); + return(ENOMEM); + } + + /* + * Allocate for version buffer + */ + verbuf_size = MRSAS_MAX_NAME_LENGTH*(sizeof(bus_addr_t)); + if (bus_dma_tag_create(sc->mrsas_parent_tag, // parent + 1, 0, // algnmnt, boundary + BUS_SPACE_MAXADDR_32BIT,// lowaddr + BUS_SPACE_MAXADDR, // highaddr + NULL, NULL, // filter, filterarg + verbuf_size, // maxsize + 1, // msegments + verbuf_size, // maxsegsize + BUS_DMA_ALLOCNOW, // flags + NULL, NULL, // lockfunc, lockarg + &sc->verbuf_tag)) { + device_printf(sc->mrsas_dev, "Cannot allocate verbuf DMA tag\n"); + return (ENOMEM); + } + if (bus_dmamem_alloc(sc->verbuf_tag, (void **)&sc->verbuf_mem, + BUS_DMA_NOWAIT, &sc->verbuf_dmamap)) { + device_printf(sc->mrsas_dev, "Cannot allocate verbuf memory\n"); + return (ENOMEM); + } + bzero(sc->verbuf_mem, verbuf_size); + if (bus_dmamap_load(sc->verbuf_tag, sc->verbuf_dmamap, sc->verbuf_mem, + verbuf_size, mrsas_addr_cb, &sc->verbuf_phys_addr, BUS_DMA_NOWAIT)){ + device_printf(sc->mrsas_dev, "Cannot load verbuf DMA map\n"); + return(ENOMEM); + } + + /* + * Allocate IO Request Frames + */ + io_req_size = sc->io_frames_alloc_sz; + if (bus_dma_tag_create( sc->mrsas_parent_tag, // parent + 16, 0, // algnmnt, boundary + BUS_SPACE_MAXADDR_32BIT,// lowaddr + BUS_SPACE_MAXADDR, // highaddr + NULL, NULL, // filter, filterarg + io_req_size, // maxsize + 1, // msegments + io_req_size, // maxsegsize + BUS_DMA_ALLOCNOW, // flags + NULL, NULL, // lockfunc, lockarg + &sc->io_request_tag)) { + device_printf(sc->mrsas_dev, "Cannot create IO request tag\n"); + return (ENOMEM); + } + if (bus_dmamem_alloc(sc->io_request_tag, (void **)&sc->io_request_mem, + BUS_DMA_NOWAIT, &sc->io_request_dmamap)) { + device_printf(sc->mrsas_dev, "Cannot alloc IO request memory\n"); + return (ENOMEM); + } + bzero(sc->io_request_mem, io_req_size); + if (bus_dmamap_load(sc->io_request_tag, sc->io_request_dmamap, + sc->io_request_mem, io_req_size, mrsas_addr_cb, + &sc->io_request_phys_addr, BUS_DMA_NOWAIT)) { + device_printf(sc->mrsas_dev, "Cannot load IO request memory\n"); + return (ENOMEM); + } + + /* + * Allocate Chain Frames + */ + chain_frame_size = sc->chain_frames_alloc_sz; + if (bus_dma_tag_create( sc->mrsas_parent_tag, // parent + 4, 0, // algnmnt, boundary + BUS_SPACE_MAXADDR_32BIT,// lowaddr + BUS_SPACE_MAXADDR, // highaddr + NULL, NULL, // filter, filterarg + chain_frame_size, // maxsize + 1, // msegments + chain_frame_size, // maxsegsize + BUS_DMA_ALLOCNOW, // flags + NULL, NULL, // lockfunc, lockarg + &sc->chain_frame_tag)) { + device_printf(sc->mrsas_dev, "Cannot create chain frame tag\n"); + return (ENOMEM); + } + if (bus_dmamem_alloc(sc->chain_frame_tag, (void **)&sc->chain_frame_mem, + BUS_DMA_NOWAIT, &sc->chain_frame_dmamap)) { + device_printf(sc->mrsas_dev, "Cannot alloc chain frame memory\n"); + return (ENOMEM); + } + bzero(sc->chain_frame_mem, chain_frame_size); + if (bus_dmamap_load(sc->chain_frame_tag, sc->chain_frame_dmamap, + sc->chain_frame_mem, chain_frame_size, mrsas_addr_cb, + &sc->chain_frame_phys_addr, BUS_DMA_NOWAIT)) { + device_printf(sc->mrsas_dev, "Cannot load chain frame memory\n"); + return (ENOMEM); + } + + /* + * Allocate Reply Descriptor Array + */ + reply_desc_size = sc->reply_alloc_sz; + if (bus_dma_tag_create( sc->mrsas_parent_tag, // parent + 16, 0, // algnmnt, boundary + BUS_SPACE_MAXADDR_32BIT,// lowaddr + BUS_SPACE_MAXADDR, // highaddr + NULL, NULL, // filter, filterarg + reply_desc_size, // maxsize + 1, // msegments + reply_desc_size, // maxsegsize + BUS_DMA_ALLOCNOW, // flags + NULL, NULL, // lockfunc, lockarg + &sc->reply_desc_tag)) { + device_printf(sc->mrsas_dev, "Cannot create reply descriptor tag\n"); + return (ENOMEM); + } + if (bus_dmamem_alloc(sc->reply_desc_tag, (void **)&sc->reply_desc_mem, + BUS_DMA_NOWAIT, &sc->reply_desc_dmamap)) { + device_printf(sc->mrsas_dev, "Cannot alloc reply descriptor memory\n"); + return (ENOMEM); + } + if (bus_dmamap_load(sc->reply_desc_tag, sc->reply_desc_dmamap, + sc->reply_desc_mem, reply_desc_size, mrsas_addr_cb, + &sc->reply_desc_phys_addr, BUS_DMA_NOWAIT)) { + device_printf(sc->mrsas_dev, "Cannot load reply descriptor memory\n"); + return (ENOMEM); + } + + /* + * Allocate Sense Buffer Array. Keep in lower 4GB + */ + sense_size = sc->max_fw_cmds * MRSAS_SENSE_LEN; + if (bus_dma_tag_create(sc->mrsas_parent_tag, // parent + 64, 0, // algnmnt, boundary + BUS_SPACE_MAXADDR_32BIT,// lowaddr + BUS_SPACE_MAXADDR, // highaddr + NULL, NULL, // filter, filterarg + sense_size, // maxsize + 1, // nsegments + sense_size, // maxsegsize + BUS_DMA_ALLOCNOW, // flags + NULL, NULL, // lockfunc, lockarg + &sc->sense_tag)) { + device_printf(sc->mrsas_dev, "Cannot allocate sense buf tag\n"); + return (ENOMEM); + } + if (bus_dmamem_alloc(sc->sense_tag, (void **)&sc->sense_mem, + BUS_DMA_NOWAIT, &sc->sense_dmamap)) { + device_printf(sc->mrsas_dev, "Cannot allocate sense buf memory\n"); + return (ENOMEM); + } + if (bus_dmamap_load(sc->sense_tag, sc->sense_dmamap, + sc->sense_mem, sense_size, mrsas_addr_cb, &sc->sense_phys_addr, + BUS_DMA_NOWAIT)){ + device_printf(sc->mrsas_dev, "Cannot load sense buf memory\n"); + return (ENOMEM); + } + + /* + * Allocate for Event detail structure + */ + evt_detail_size = sizeof(struct mrsas_evt_detail); + if (bus_dma_tag_create( sc->mrsas_parent_tag, // parent + 1, 0, // algnmnt, boundary + BUS_SPACE_MAXADDR_32BIT,// lowaddr + BUS_SPACE_MAXADDR, // highaddr + NULL, NULL, // filter, filterarg + evt_detail_size, // maxsize + 1, // msegments + evt_detail_size, // maxsegsize + BUS_DMA_ALLOCNOW, // flags + NULL, NULL, // lockfunc, lockarg + &sc->evt_detail_tag)) { + device_printf(sc->mrsas_dev, "Cannot create Event detail tag\n"); + return (ENOMEM); + } + if (bus_dmamem_alloc(sc->evt_detail_tag, (void **)&sc->evt_detail_mem, + BUS_DMA_NOWAIT, &sc->evt_detail_dmamap)) { + device_printf(sc->mrsas_dev, "Cannot alloc Event detail buffer memory\n"); + return (ENOMEM); + } + bzero(sc->evt_detail_mem, evt_detail_size); + if (bus_dmamap_load(sc->evt_detail_tag, sc->evt_detail_dmamap, + sc->evt_detail_mem, evt_detail_size, mrsas_addr_cb, + &sc->evt_detail_phys_addr, BUS_DMA_NOWAIT)) { + device_printf(sc->mrsas_dev, "Cannot load Event detail buffer memory\n"); + return (ENOMEM); + } + + + /* + * Create a dma tag for data buffers; size will be the maximum + * possible I/O size (280kB). + */ + if (bus_dma_tag_create(sc->mrsas_parent_tag, // parent + 1, // alignment + 0, // boundary + BUS_SPACE_MAXADDR, // lowaddr + BUS_SPACE_MAXADDR, // highaddr + NULL, NULL, // filter, filterarg + MRSAS_MAX_IO_SIZE, // maxsize + MRSAS_MAX_SGL, // nsegments + MRSAS_MAX_IO_SIZE, // maxsegsize + BUS_DMA_ALLOCNOW, // flags + busdma_lock_mutex, // lockfunc + &sc->io_lock, // lockfuncarg + &sc->data_tag)) { + device_printf(sc->mrsas_dev, "Cannot create data dma tag\n"); + return(ENOMEM); + } + + return(0); +} + +/* + * mrsas_addr_cb: Callback function of bus_dmamap_load() + * input: callback argument, + * machine dependent type that describes DMA segments, + * number of segments, + * error code. + * + * This function is for the driver to receive mapping information resultant + * of the bus_dmamap_load(). The information is actually not being used, + * but the address is saved anyway. + */ +void +mrsas_addr_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) +{ + bus_addr_t *addr; + + addr = arg; + *addr = segs[0].ds_addr; +} + +/* + * mrsas_setup_raidmap: Set up RAID map. + * input: Adapter instance soft state + * + * Allocate DMA memory for the RAID maps and perform setup. + */ +static int mrsas_setup_raidmap(struct mrsas_softc *sc) +{ + sc->map_sz = sizeof(MR_FW_RAID_MAP) + + (sizeof(MR_LD_SPAN_MAP) * (MAX_LOGICAL_DRIVES - 1)); + + for (int i=0; i < 2; i++) + { + if (bus_dma_tag_create(sc->mrsas_parent_tag, // parent + 4, 0, // algnmnt, boundary + BUS_SPACE_MAXADDR_32BIT,// lowaddr + BUS_SPACE_MAXADDR, // highaddr + NULL, NULL, // filter, filterarg + sc->map_sz, // maxsize + 1, // nsegments + sc->map_sz, // maxsegsize + BUS_DMA_ALLOCNOW, // flags + NULL, NULL, // lockfunc, lockarg + &sc->raidmap_tag[i])) { + device_printf(sc->mrsas_dev, "Cannot allocate raid map tag.\n"); + return (ENOMEM); + } + if (bus_dmamem_alloc(sc->raidmap_tag[i], (void **)&sc->raidmap_mem[i], + BUS_DMA_NOWAIT, &sc->raidmap_dmamap[i])) { + device_printf(sc->mrsas_dev, "Cannot allocate raidmap memory.\n"); + return (ENOMEM); + } + if (bus_dmamap_load(sc->raidmap_tag[i], sc->raidmap_dmamap[i], + sc->raidmap_mem[i], sc->map_sz, mrsas_addr_cb, &sc->raidmap_phys_addr[i], + BUS_DMA_NOWAIT)){ + device_printf(sc->mrsas_dev, "Cannot load raidmap memory.\n"); + return (ENOMEM); + } + if (!sc->raidmap_mem[i]) { + device_printf(sc->mrsas_dev, "Cannot allocate memory for raid map.\n"); + return (ENOMEM); + } + } + + if (!mrsas_get_map_info(sc)) + mrsas_sync_map_info(sc); + + return (0); +} + +/** + * mrsas_init_fw: Initialize Firmware + * input: Adapter soft state + * + * Calls transition_to_ready() to make sure Firmware is in operational + * state and calls mrsas_init_adapter() to send IOC_INIT command to + * Firmware. It issues internal commands to get the controller info + * after the IOC_INIT command response is received by Firmware. + * Note: code relating to get_pdlist, get_ld_list and max_sectors + * are currently not being used, it is left here as placeholder. + */ +static int mrsas_init_fw(struct mrsas_softc *sc) +{ + u_int32_t max_sectors_1; + u_int32_t max_sectors_2; + u_int32_t tmp_sectors; + struct mrsas_ctrl_info *ctrl_info; + + int ret, ocr = 0; + + + /* Make sure Firmware is ready */ + ret = mrsas_transition_to_ready(sc, ocr); + if (ret != SUCCESS) { + return(ret); + } + + /* Get operational params, sge flags, send init cmd to ctlr */ + if (mrsas_init_adapter(sc) != SUCCESS){ + device_printf(sc->mrsas_dev, "Adapter initialize Fail.\n"); + return(1); + } + + /* Allocate internal commands for pass-thru */ + if (mrsas_alloc_mfi_cmds(sc) != SUCCESS){ + device_printf(sc->mrsas_dev, "Allocate MFI cmd failed.\n"); + return(1); + } + + if (mrsas_setup_raidmap(sc) != SUCCESS) { + device_printf(sc->mrsas_dev, "Set up RAID map failed.\n"); + return(1); + } + + /* For pass-thru, get PD/LD list and controller info */ + memset(sc->pd_list, 0, MRSAS_MAX_PD * sizeof(struct mrsas_pd_list)); + mrsas_get_pd_list(sc); + + memset(sc->ld_ids, 0xff, MRSAS_MAX_LD); + mrsas_get_ld_list(sc); + + //memset(sc->log_to_span, 0, MRSAS_MAX_LD * sizeof(LD_SPAN_INFO)); + + ctrl_info = malloc(sizeof(struct mrsas_ctrl_info), M_MRSAS, M_NOWAIT); + + /* + * Compute the max allowed sectors per IO: The controller info has two + * limits on max sectors. Driver should use the minimum of these two. + * + * 1 << stripe_sz_ops.min = max sectors per strip + * + * Note that older firmwares ( < FW ver 30) didn't report information + * to calculate max_sectors_1. So the number ended up as zero always. + */ + tmp_sectors = 0; + if (ctrl_info && !mrsas_get_ctrl_info(sc, ctrl_info)) { + max_sectors_1 = (1 << ctrl_info->stripe_sz_ops.min) * + ctrl_info->max_strips_per_io; + max_sectors_2 = ctrl_info->max_request_size; + tmp_sectors = min(max_sectors_1 , max_sectors_2); + sc->disableOnlineCtrlReset = + ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset; + sc->UnevenSpanSupport = + ctrl_info->adapterOperations2.supportUnevenSpans; + if(sc->UnevenSpanSupport) { + device_printf(sc->mrsas_dev, "FW supports: UnevenSpanSupport=%x\n", + sc->UnevenSpanSupport); + if (MR_ValidateMapInfo(sc)) + sc->fast_path_io = 1; + else + sc->fast_path_io = 0; + + } + } + sc->max_sectors_per_req = sc->max_num_sge * MRSAS_PAGE_SIZE / 512; + + if (tmp_sectors && (sc->max_sectors_per_req > tmp_sectors)) + sc->max_sectors_per_req = tmp_sectors; + + if (ctrl_info) + free(ctrl_info, M_MRSAS); + + return(0); +} + +/** + * mrsas_init_adapter: Initializes the adapter/controller + * input: Adapter soft state + * + * Prepares for the issuing of the IOC Init cmd to FW for initializing the + * ROC/controller. The FW register is read to determined the number of + * commands that is supported. All memory allocations for IO is based on + * max_cmd. Appropriate calculations are performed in this function. + */ +int mrsas_init_adapter(struct mrsas_softc *sc) +{ + uint32_t status; + u_int32_t max_cmd; + int ret; + + /* Read FW status register */ + status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)); + + /* Get operational params from status register */ + sc->max_fw_cmds = status & MRSAS_FWSTATE_MAXCMD_MASK; + + /* Decrement the max supported by 1, to correlate with FW */ + sc->max_fw_cmds = sc->max_fw_cmds-1; + max_cmd = sc->max_fw_cmds; + + /* Determine allocation size of command frames */ + sc->reply_q_depth = ((max_cmd *2 +1 +15)/16*16); + sc->request_alloc_sz = sizeof(MRSAS_REQUEST_DESCRIPTOR_UNION) * max_cmd; + sc->reply_alloc_sz = sizeof(MPI2_REPLY_DESCRIPTORS_UNION) * (sc->reply_q_depth); + sc->io_frames_alloc_sz = MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE + (MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE * (max_cmd + 1)); + sc->chain_frames_alloc_sz = 1024 * max_cmd; + sc->max_sge_in_main_msg = (MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE - + offsetof(MRSAS_RAID_SCSI_IO_REQUEST, SGL))/16; + + sc->max_sge_in_chain = MRSAS_MAX_SZ_CHAIN_FRAME / sizeof(MPI2_SGE_IO_UNION); + sc->max_num_sge = sc->max_sge_in_main_msg + sc->max_sge_in_chain - 2; + + /* Used for pass thru MFI frame (DCMD) */ + sc->chain_offset_mfi_pthru = offsetof(MRSAS_RAID_SCSI_IO_REQUEST, SGL)/16; + + sc->chain_offset_io_request = (MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE - + sizeof(MPI2_SGE_IO_UNION))/16; + + sc->last_reply_idx = 0; + + ret = mrsas_alloc_mem(sc); + if (ret != SUCCESS) + return(ret); + + ret = mrsas_alloc_mpt_cmds(sc); + if (ret != SUCCESS) + return(ret); + + ret = mrsas_ioc_init(sc); + if (ret != SUCCESS) + return(ret); + + + return(0); +} + +/** + * mrsas_alloc_ioc_cmd: Allocates memory for IOC Init command + * input: Adapter soft state + * + * Allocates for the IOC Init cmd to FW to initialize the ROC/controller. + */ +int mrsas_alloc_ioc_cmd(struct mrsas_softc *sc) +{ + int ioc_init_size; + + /* Allocate IOC INIT command */ + ioc_init_size = 1024 + sizeof(MPI2_IOC_INIT_REQUEST); + if (bus_dma_tag_create( sc->mrsas_parent_tag, // parent + 1, 0, // algnmnt, boundary + BUS_SPACE_MAXADDR_32BIT,// lowaddr + BUS_SPACE_MAXADDR, // highaddr + NULL, NULL, // filter, filterarg + ioc_init_size, // maxsize + 1, // msegments + ioc_init_size, // maxsegsize + BUS_DMA_ALLOCNOW, // flags + NULL, NULL, // lockfunc, lockarg + &sc->ioc_init_tag)) { + device_printf(sc->mrsas_dev, "Cannot allocate ioc init tag\n"); + return (ENOMEM); + } + if (bus_dmamem_alloc(sc->ioc_init_tag, (void **)&sc->ioc_init_mem, + BUS_DMA_NOWAIT, &sc->ioc_init_dmamap)) { + device_printf(sc->mrsas_dev, "Cannot allocate ioc init cmd mem\n"); + return (ENOMEM); + } + bzero(sc->ioc_init_mem, ioc_init_size); + if (bus_dmamap_load(sc->ioc_init_tag, sc->ioc_init_dmamap, + sc->ioc_init_mem, ioc_init_size, mrsas_addr_cb, + &sc->ioc_init_phys_mem, BUS_DMA_NOWAIT)) { + device_printf(sc->mrsas_dev, "Cannot load ioc init cmd mem\n"); + return (ENOMEM); + } + + return (0); +} + +/** + * mrsas_free_ioc_cmd: Allocates memory for IOC Init command + * input: Adapter soft state + * + * Deallocates memory of the IOC Init cmd. + */ +void mrsas_free_ioc_cmd(struct mrsas_softc *sc) +{ + if (sc->ioc_init_phys_mem) + bus_dmamap_unload(sc->ioc_init_tag, sc->ioc_init_dmamap); + if (sc->ioc_init_mem != NULL) + bus_dmamem_free(sc->ioc_init_tag, sc->ioc_init_mem, sc->ioc_init_dmamap); + if (sc->ioc_init_tag != NULL) + bus_dma_tag_destroy(sc->ioc_init_tag); +} + +/** + * mrsas_ioc_init: Sends IOC Init command to FW + * input: Adapter soft state + * + * Issues the IOC Init cmd to FW to initialize the ROC/controller. + */ +int mrsas_ioc_init(struct mrsas_softc *sc) +{ + struct mrsas_init_frame *init_frame; + pMpi2IOCInitRequest_t IOCInitMsg; + MRSAS_REQUEST_DESCRIPTOR_UNION req_desc; + u_int8_t max_wait = MRSAS_IOC_INIT_WAIT_TIME; + bus_addr_t phys_addr; + int i, retcode = 0; + + /* Allocate memory for the IOC INIT command */ + if (mrsas_alloc_ioc_cmd(sc)) { + device_printf(sc->mrsas_dev, "Cannot allocate IOC command.\n"); + return(1); + } + + IOCInitMsg = (pMpi2IOCInitRequest_t)(((char *)sc->ioc_init_mem) +1024); + IOCInitMsg->Function = MPI2_FUNCTION_IOC_INIT; + IOCInitMsg->WhoInit = MPI2_WHOINIT_HOST_DRIVER; + IOCInitMsg->MsgVersion = MPI2_VERSION; + IOCInitMsg->HeaderVersion = MPI2_HEADER_VERSION; + IOCInitMsg->SystemRequestFrameSize = MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE / 4; + IOCInitMsg->ReplyDescriptorPostQueueDepth = sc->reply_q_depth; + IOCInitMsg->ReplyDescriptorPostQueueAddress = sc->reply_desc_phys_addr; + IOCInitMsg->SystemRequestFrameBaseAddress = sc->io_request_phys_addr; + + init_frame = (struct mrsas_init_frame *)sc->ioc_init_mem; + init_frame->cmd = MFI_CMD_INIT; + init_frame->cmd_status = 0xFF; + init_frame->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE; + + if (sc->verbuf_mem) { + snprintf((char *)sc->verbuf_mem, strlen(MRSAS_VERSION)+2,"%s\n", + MRSAS_VERSION); + init_frame->driver_ver_lo = (bus_addr_t)sc->verbuf_phys_addr; + init_frame->driver_ver_hi = 0; + } + + phys_addr = (bus_addr_t)sc->ioc_init_phys_mem + 1024; + init_frame->queue_info_new_phys_addr_lo = phys_addr; + init_frame->data_xfer_len = sizeof(Mpi2IOCInitRequest_t); + + req_desc.addr.Words = (bus_addr_t)sc->ioc_init_phys_mem; + req_desc.MFAIo.RequestFlags = + (MRSAS_REQ_DESCRIPT_FLAGS_MFA << MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); + + mrsas_disable_intr(sc); + mrsas_dprint(sc, MRSAS_OCR, "Issuing IOC INIT command to FW.\n"); + //device_printf(sc->mrsas_dev, "Issuing IOC INIT command to FW.\n");del? + mrsas_fire_cmd(sc, req_desc.addr.u.low, req_desc.addr.u.high); + + /* + * Poll response timer to wait for Firmware response. While this + * timer with the DELAY call could block CPU, the time interval for + * this is only 1 millisecond. + */ + if (init_frame->cmd_status == 0xFF) { + for (i=0; i < (max_wait * 1000); i++){ + if (init_frame->cmd_status == 0xFF) + DELAY(1000); + else + break; + } + } + + if (init_frame->cmd_status == 0) + mrsas_dprint(sc, MRSAS_OCR, + "IOC INIT response received from FW.\n"); + //device_printf(sc->mrsas_dev, "IOC INIT response received from FW.\n");del? + else + { + if (init_frame->cmd_status == 0xFF) + device_printf(sc->mrsas_dev, "IOC Init timed out after %d seconds.\n", max_wait); + else + device_printf(sc->mrsas_dev, "IOC Init failed, status = 0x%x\n", init_frame->cmd_status); + retcode = 1; + } + + mrsas_free_ioc_cmd(sc); + return (retcode); +} + +/** + * mrsas_alloc_mpt_cmds: Allocates the command packets + * input: Adapter instance soft state + * + * This function allocates the internal commands for IOs. Each command that is + * issued to FW is wrapped in a local data structure called mrsas_mpt_cmd. + * An array is allocated with mrsas_mpt_cmd context. The free commands are + * maintained in a linked list (cmd pool). SMID value range is from 1 to + * max_fw_cmds. + */ +int mrsas_alloc_mpt_cmds(struct mrsas_softc *sc) +{ + int i, j; + u_int32_t max_cmd; + struct mrsas_mpt_cmd *cmd; + pMpi2ReplyDescriptorsUnion_t reply_desc; + u_int32_t offset, chain_offset, sense_offset; + bus_addr_t io_req_base_phys, chain_frame_base_phys, sense_base_phys; + u_int8_t *io_req_base, *chain_frame_base, *sense_base; + + max_cmd = sc->max_fw_cmds; + + sc->req_desc = malloc(sc->request_alloc_sz, M_MRSAS, M_NOWAIT); + if (!sc->req_desc) { + device_printf(sc->mrsas_dev, "Out of memory, cannot alloc req desc\n"); + return(ENOMEM); + } + memset(sc->req_desc, 0, sc->request_alloc_sz); + + /* + * sc->mpt_cmd_list is an array of struct mrsas_mpt_cmd pointers. Allocate the + * dynamic array first and then allocate individual commands. + */ + sc->mpt_cmd_list = malloc(sizeof(struct mrsas_mpt_cmd*)*max_cmd, M_MRSAS, M_NOWAIT); + if (!sc->mpt_cmd_list) { + device_printf(sc->mrsas_dev, "Cannot alloc memory for mpt_cmd_list.\n"); + return(ENOMEM); + } + memset(sc->mpt_cmd_list, 0, sizeof(struct mrsas_mpt_cmd *)*max_cmd); + for (i = 0; i < max_cmd; i++) { + sc->mpt_cmd_list[i] = malloc(sizeof(struct mrsas_mpt_cmd), + M_MRSAS, M_NOWAIT); + if (!sc->mpt_cmd_list[i]) { + for (j = 0; j < i; j++) + free(sc->mpt_cmd_list[j],M_MRSAS); + free(sc->mpt_cmd_list, M_MRSAS); + sc->mpt_cmd_list = NULL; + return(ENOMEM); + } + } + + io_req_base = (u_int8_t*)sc->io_request_mem + MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE; + io_req_base_phys = (bus_addr_t)sc->io_request_phys_addr + MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE; + chain_frame_base = (u_int8_t*)sc->chain_frame_mem; + chain_frame_base_phys = (bus_addr_t)sc->chain_frame_phys_addr; + sense_base = (u_int8_t*)sc->sense_mem; + sense_base_phys = (bus_addr_t)sc->sense_phys_addr; + for (i = 0; i < max_cmd; i++) { + cmd = sc->mpt_cmd_list[i]; + offset = MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE * i; + chain_offset = 1024 * i; + sense_offset = MRSAS_SENSE_LEN * i; + memset(cmd, 0, sizeof(struct mrsas_mpt_cmd)); + cmd->index = i + 1; + cmd->ccb_ptr = NULL; + callout_init(&cmd->cm_callout, 0); + cmd->sync_cmd_idx = (u_int32_t)MRSAS_ULONG_MAX; + cmd->sc = sc; + cmd->io_request = (MRSAS_RAID_SCSI_IO_REQUEST *) (io_req_base + offset); + memset(cmd->io_request, 0, sizeof(MRSAS_RAID_SCSI_IO_REQUEST)); + cmd->io_request_phys_addr = io_req_base_phys + offset; + cmd->chain_frame = (MPI2_SGE_IO_UNION *) (chain_frame_base + chain_offset); + cmd->chain_frame_phys_addr = chain_frame_base_phys + chain_offset; + cmd->sense = sense_base + sense_offset; + cmd->sense_phys_addr = sense_base_phys + sense_offset; + if (bus_dmamap_create(sc->data_tag, 0, &cmd->data_dmamap)) { + return(FAIL); + } + TAILQ_INSERT_TAIL(&(sc->mrsas_mpt_cmd_list_head), cmd, next); + } + + /* Initialize reply descriptor array to 0xFFFFFFFF */ + reply_desc = sc->reply_desc_mem; + for (i = 0; i < sc->reply_q_depth; i++, reply_desc++) { + reply_desc->Words = MRSAS_ULONG_MAX; + } + return(0); +} + +/** + * mrsas_fire_cmd: Sends command to FW + * input: Adapter soft state + * request descriptor address low + * request descriptor address high + * + * This functions fires the command to Firmware by writing to the + * inbound_low_queue_port and inbound_high_queue_port. + */ +void mrsas_fire_cmd(struct mrsas_softc *sc, u_int32_t req_desc_lo, + u_int32_t req_desc_hi) +{ + mtx_lock(&sc->pci_lock); + mrsas_write_reg(sc, offsetof(mrsas_reg_set, inbound_low_queue_port), + req_desc_lo); + mrsas_write_reg(sc, offsetof(mrsas_reg_set, inbound_high_queue_port), + req_desc_hi); + mtx_unlock(&sc->pci_lock); +} + +/** + * mrsas_transition_to_ready: Move FW to Ready state + * input: Adapter instance soft state + * + * During the initialization, FW passes can potentially be in any one of + * several possible states. If the FW in operational, waiting-for-handshake + * states, driver must take steps to bring it to ready state. Otherwise, it + * has to wait for the ready state. + */ +int mrsas_transition_to_ready(struct mrsas_softc *sc, int ocr) +{ + int i; + u_int8_t max_wait; + u_int32_t val, fw_state; + u_int32_t cur_state; + u_int32_t abs_state, curr_abs_state; + + val = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)); + fw_state = val & MFI_STATE_MASK; + max_wait = MRSAS_RESET_WAIT_TIME; + + if (fw_state != MFI_STATE_READY) + device_printf(sc->mrsas_dev, "Waiting for FW to come to ready state\n"); + + while (fw_state != MFI_STATE_READY) { + abs_state = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)); + switch (fw_state) { + case MFI_STATE_FAULT: + device_printf(sc->mrsas_dev, "FW is in FAULT state!!\n"); + if (ocr) { + cur_state = MFI_STATE_FAULT; + break; + } + else + return -ENODEV; + case MFI_STATE_WAIT_HANDSHAKE: + /* Set the CLR bit in inbound doorbell */ + mrsas_write_reg(sc, offsetof(mrsas_reg_set, doorbell), + MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG); + cur_state = MFI_STATE_WAIT_HANDSHAKE; + break; + case MFI_STATE_BOOT_MESSAGE_PENDING: + mrsas_write_reg(sc, offsetof(mrsas_reg_set, doorbell), + MFI_INIT_HOTPLUG); + cur_state = MFI_STATE_BOOT_MESSAGE_PENDING; + break; + case MFI_STATE_OPERATIONAL: + /* Bring it to READY state; assuming max wait 10 secs */ + mrsas_disable_intr(sc); + mrsas_write_reg(sc, offsetof(mrsas_reg_set, doorbell), MFI_RESET_FLAGS); + for (i=0; i < max_wait * 1000; i++) { + if (mrsas_read_reg(sc, offsetof(mrsas_reg_set, doorbell)) & 1) + DELAY(1000); + else + break; + } + cur_state = MFI_STATE_OPERATIONAL; + break; + case MFI_STATE_UNDEFINED: + /* This state should not last for more than 2 seconds */ + cur_state = MFI_STATE_UNDEFINED; + break; + case MFI_STATE_BB_INIT: + cur_state = MFI_STATE_BB_INIT; + break; + case MFI_STATE_FW_INIT: + cur_state = MFI_STATE_FW_INIT; + break; + case MFI_STATE_FW_INIT_2: + cur_state = MFI_STATE_FW_INIT_2; + break; + case MFI_STATE_DEVICE_SCAN: + cur_state = MFI_STATE_DEVICE_SCAN; + break; + case MFI_STATE_FLUSH_CACHE: + cur_state = MFI_STATE_FLUSH_CACHE; + break; + default: + device_printf(sc->mrsas_dev, "Unknown state 0x%x\n", fw_state); + return -ENODEV; + } + + /* + * The cur_state should not last for more than max_wait secs + */ + for (i = 0; i < (max_wait * 1000); i++) { + fw_state = (mrsas_read_reg(sc, offsetof(mrsas_reg_set, + outbound_scratch_pad))& MFI_STATE_MASK); + curr_abs_state = mrsas_read_reg(sc, offsetof(mrsas_reg_set, + outbound_scratch_pad)); + if (abs_state == curr_abs_state) + DELAY(1000); + else + break; + } + + /* + * Return error if fw_state hasn't changed after max_wait + */ + if (curr_abs_state == abs_state) { + device_printf(sc->mrsas_dev, "FW state [%d] hasn't changed " + "in %d secs\n", fw_state, max_wait); + return -ENODEV; + } + } + mrsas_dprint(sc, MRSAS_OCR, "FW now in Ready state\n"); + //device_printf(sc->mrsas_dev, "FW now in Ready state\n");del? + return 0; +} + +/** + * mrsas_get_mfi_cmd: Get a cmd from free command pool + * input: Adapter soft state + * + * This function removes an MFI command from the command list. + */ +struct mrsas_mfi_cmd* mrsas_get_mfi_cmd(struct mrsas_softc *sc) +{ + struct mrsas_mfi_cmd *cmd = NULL; + + mtx_lock(&sc->mfi_cmd_pool_lock); + if (!TAILQ_EMPTY(&sc->mrsas_mfi_cmd_list_head)){ + cmd = TAILQ_FIRST(&sc->mrsas_mfi_cmd_list_head); + TAILQ_REMOVE(&sc->mrsas_mfi_cmd_list_head, cmd, next); + } + mtx_unlock(&sc->mfi_cmd_pool_lock); + + return cmd; +} + +/** + * mrsas_ocr_thread Thread to handle OCR/Kill Adapter. + * input: Adapter Context. + * + * This function will check FW status register and flag + * do_timeout_reset flag. It will do OCR/Kill adapter if + * FW is in fault state or IO timed out has trigger reset. + */ +static void +mrsas_ocr_thread(void *arg) +{ + struct mrsas_softc *sc; + u_int32_t fw_status, fw_state; + + sc = (struct mrsas_softc *)arg; + + mrsas_dprint(sc, MRSAS_TRACE, "%s\n", __func__); + + sc->ocr_thread_active = 1; + mtx_lock(&sc->sim_lock); + for (;;) { + /* Sleep for 1 second and check the queue status*/ + msleep(&sc->ocr_chan, &sc->sim_lock, PRIBIO, + "mrsas_ocr", sc->mrsas_fw_fault_check_delay * hz); + if (sc->remove_in_progress) { + mrsas_dprint(sc, MRSAS_OCR, + "Exit due to shutdown from %s\n", __func__); + break; + } + fw_status = mrsas_read_reg(sc, + offsetof(mrsas_reg_set, outbound_scratch_pad)); + fw_state = fw_status & MFI_STATE_MASK; + if (fw_state == MFI_STATE_FAULT || sc->do_timedout_reset) { + device_printf(sc->mrsas_dev, "OCR started due to %s!\n", + sc->do_timedout_reset?"IO Timeout": + "FW fault detected"); + mtx_lock_spin(&sc->ioctl_lock); + sc->reset_in_progress = 1; + sc->reset_count++; + mtx_unlock_spin(&sc->ioctl_lock); + mrsas_xpt_freeze(sc); + mrsas_reset_ctrl(sc); + mrsas_xpt_release(sc); + sc->reset_in_progress = 0; + sc->do_timedout_reset = 0; + } + } + mtx_unlock(&sc->sim_lock); + sc->ocr_thread_active = 0; + mrsas_kproc_exit(0); +} + +/** + * mrsas_reset_reply_desc Reset Reply descriptor as part of OCR. + * input: Adapter Context. + * + * This function will clear reply descriptor so that post OCR + * driver and FW will lost old history. + */ +void mrsas_reset_reply_desc(struct mrsas_softc *sc) +{ + int i; + pMpi2ReplyDescriptorsUnion_t reply_desc; + + sc->last_reply_idx = 0; + reply_desc = sc->reply_desc_mem; + for (i = 0; i < sc->reply_q_depth; i++, reply_desc++) { + reply_desc->Words = MRSAS_ULONG_MAX; + } +} + +/** + * mrsas_reset_ctrl Core function to OCR/Kill adapter. + * input: Adapter Context. + * + * This function will run from thread context so that it can sleep. + * 1. Do not handle OCR if FW is in HW critical error. + * 2. Wait for outstanding command to complete for 180 seconds. + * 3. If #2 does not find any outstanding command Controller is in working + * state, so skip OCR. + * Otherwise, do OCR/kill Adapter based on flag disableOnlineCtrlReset. + * 4. Start of the OCR, return all SCSI command back to CAM layer which has + * ccb_ptr. + * 5. Post OCR, Re-fire Managment command and move Controller to Operation + * state. + */ +int mrsas_reset_ctrl(struct mrsas_softc *sc) +{ + int retval = SUCCESS, i, j, retry = 0; + u_int32_t host_diag, abs_state, status_reg, reset_adapter; + union ccb *ccb; + struct mrsas_mfi_cmd *mfi_cmd; + struct mrsas_mpt_cmd *mpt_cmd; + MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc; + + if (sc->adprecovery == MRSAS_HW_CRITICAL_ERROR) { + device_printf(sc->mrsas_dev, + "mrsas: Hardware critical error, returning FAIL.\n"); + return FAIL; + } + + set_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags); + sc->adprecovery = MRSAS_ADPRESET_SM_INFAULT; + mrsas_disable_intr(sc); + DELAY(1000 * 1000); + + /* First try waiting for commands to complete */ + if (mrsas_wait_for_outstanding(sc)) { + mrsas_dprint(sc, MRSAS_OCR, + "resetting adapter from %s.\n", + __func__); + /* Now return commands back to the CAM layer */ + for (i = 0 ; i < sc->max_fw_cmds; i++) { + mpt_cmd = sc->mpt_cmd_list[i]; + if (mpt_cmd->ccb_ptr) { + ccb = (union ccb *)(mpt_cmd->ccb_ptr); + ccb->ccb_h.status = CAM_SCSI_BUS_RESET; + mrsas_cmd_done(sc, mpt_cmd); + atomic_dec(&sc->fw_outstanding); + } + } + + status_reg = mrsas_read_reg(sc, offsetof(mrsas_reg_set, + outbound_scratch_pad)); + abs_state = status_reg & MFI_STATE_MASK; + reset_adapter = status_reg & MFI_RESET_ADAPTER; + if (sc->disableOnlineCtrlReset || + (abs_state == MFI_STATE_FAULT && !reset_adapter)) { + /* Reset not supported, kill adapter */ + mrsas_dprint(sc, MRSAS_OCR,"Reset not supported, killing adapter.\n"); + mrsas_kill_hba(sc); + sc->adprecovery = MRSAS_HW_CRITICAL_ERROR; + retval = FAIL; + goto out; + } + + /* Now try to reset the chip */ + for (i = 0; i < MRSAS_FUSION_MAX_RESET_TRIES; i++) { + mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset), + MPI2_WRSEQ_FLUSH_KEY_VALUE); + mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset), + MPI2_WRSEQ_1ST_KEY_VALUE); + mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset), + MPI2_WRSEQ_2ND_KEY_VALUE); + mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset), + MPI2_WRSEQ_3RD_KEY_VALUE); + mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset), + MPI2_WRSEQ_4TH_KEY_VALUE); + mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset), + MPI2_WRSEQ_5TH_KEY_VALUE); + mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset), + MPI2_WRSEQ_6TH_KEY_VALUE); + + /* Check that the diag write enable (DRWE) bit is on */ + host_diag = mrsas_read_reg(sc, offsetof(mrsas_reg_set, + fusion_host_diag)); + retry = 0; + while (!(host_diag & HOST_DIAG_WRITE_ENABLE)) { + DELAY(100 * 1000); + host_diag = mrsas_read_reg(sc, offsetof(mrsas_reg_set, + fusion_host_diag)); + if (retry++ == 100) { + mrsas_dprint(sc, MRSAS_OCR, + "Host diag unlock failed!\n"); + break; + } + } + if (!(host_diag & HOST_DIAG_WRITE_ENABLE)) + continue; + + /* Send chip reset command */ + mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_host_diag), + host_diag | HOST_DIAG_RESET_ADAPTER); + DELAY(3000 * 1000); + + /* Make sure reset adapter bit is cleared */ + host_diag = mrsas_read_reg(sc, offsetof(mrsas_reg_set, + fusion_host_diag)); + retry = 0; + while (host_diag & HOST_DIAG_RESET_ADAPTER) { + DELAY(100 * 1000); + host_diag = mrsas_read_reg(sc, offsetof(mrsas_reg_set, + fusion_host_diag)); + if (retry++ == 1000) { + mrsas_dprint(sc, MRSAS_OCR, + "Diag reset adapter never cleared!\n"); + break; + } + } + if (host_diag & HOST_DIAG_RESET_ADAPTER) + continue; + + abs_state = mrsas_read_reg(sc, offsetof(mrsas_reg_set, + outbound_scratch_pad)) & MFI_STATE_MASK; + retry = 0; + + while ((abs_state <= MFI_STATE_FW_INIT) && (retry++ < 1000)) { + DELAY(100 * 1000); + abs_state = mrsas_read_reg(sc, offsetof(mrsas_reg_set, + outbound_scratch_pad)) & MFI_STATE_MASK; + } + if (abs_state <= MFI_STATE_FW_INIT) { + mrsas_dprint(sc, MRSAS_OCR, "firmware state < MFI_STATE_FW_INIT," + " state = 0x%x\n", abs_state); + continue; + } + + /* Wait for FW to become ready */ + if (mrsas_transition_to_ready(sc, 1)) { + mrsas_dprint(sc, MRSAS_OCR, + "mrsas: Failed to transition controller to ready.\n"); + continue; + } + + mrsas_reset_reply_desc(sc); + if (mrsas_ioc_init(sc)) { + mrsas_dprint(sc, MRSAS_OCR, "mrsas_ioc_init() failed!\n"); + continue; + } + + clear_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags); + mrsas_enable_intr(sc); + sc->adprecovery = MRSAS_HBA_OPERATIONAL; + + /* Re-fire management commands */ + for (j = 0 ; j < sc->max_fw_cmds; j++) { + mpt_cmd = sc->mpt_cmd_list[j]; + if (mpt_cmd->sync_cmd_idx != (u_int32_t)MRSAS_ULONG_MAX) { + mfi_cmd = sc->mfi_cmd_list[mpt_cmd->sync_cmd_idx]; + if (mfi_cmd->frame->dcmd.opcode == + MR_DCMD_LD_MAP_GET_INFO) { + mrsas_release_mfi_cmd(mfi_cmd); + mrsas_release_mpt_cmd(mpt_cmd); + } else { + req_desc = mrsas_get_request_desc(sc, + mfi_cmd->cmd_id.context.smid - 1); + mrsas_dprint(sc, MRSAS_OCR, + "Re-fire command DCMD opcode 0x%x index %d\n ", + mfi_cmd->frame->dcmd.opcode, j); + if (!req_desc) + device_printf(sc->mrsas_dev, + "Cannot build MPT cmd.\n"); + else + mrsas_fire_cmd(sc, req_desc->addr.u.low, + req_desc->addr.u.high); + } + } + } + + /* Reset load balance info */ + memset(sc->load_balance_info, 0, + sizeof(LD_LOAD_BALANCE_INFO) * MAX_LOGICAL_DRIVES); + + if (!mrsas_get_map_info(sc)) + mrsas_sync_map_info(sc); + + /* Adapter reset completed successfully */ + device_printf(sc->mrsas_dev, "Reset successful\n"); + retval = SUCCESS; + goto out; + } + /* Reset failed, kill the adapter */ + device_printf(sc->mrsas_dev, "Reset failed, killing adapter.\n"); + mrsas_kill_hba(sc); + retval = FAIL; + } else { + clear_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags); + mrsas_enable_intr(sc); + sc->adprecovery = MRSAS_HBA_OPERATIONAL; + } +out: + clear_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags); + mrsas_dprint(sc, MRSAS_OCR, + "Reset Exit with %d.\n", retval); + return retval; +} + +/** + * mrsas_kill_hba Kill HBA when OCR is not supported. + * input: Adapter Context. + * + * This function will kill HBA when OCR is not supported. + */ +void mrsas_kill_hba (struct mrsas_softc *sc) +{ + mrsas_dprint(sc, MRSAS_OCR, "%s\n", __func__); + mrsas_write_reg(sc, offsetof(mrsas_reg_set, doorbell), + MFI_STOP_ADP); + /* Flush */ + mrsas_read_reg(sc, offsetof(mrsas_reg_set, doorbell)); +} + +/** + * mrsas_wait_for_outstanding Wait for outstanding commands + * input: Adapter Context. + * + * This function will wait for 180 seconds for outstanding + * commands to be completed. + */ +int mrsas_wait_for_outstanding(struct mrsas_softc *sc) +{ + int i, outstanding, retval = 0; + u_int32_t fw_state; + + for (i = 0; i < MRSAS_RESET_WAIT_TIME; i++) { + if (sc->remove_in_progress) { + mrsas_dprint(sc, MRSAS_OCR, + "Driver remove or shutdown called.\n"); + retval = 1; + goto out; + } + /* Check if firmware is in fault state */ + fw_state = mrsas_read_reg(sc, offsetof(mrsas_reg_set, + outbound_scratch_pad)) & MFI_STATE_MASK; + if (fw_state == MFI_STATE_FAULT) { + mrsas_dprint(sc, MRSAS_OCR, + "Found FW in FAULT state, will reset adapter.\n"); + retval = 1; + goto out; + } + outstanding = atomic_read(&sc->fw_outstanding); + if (!outstanding) + goto out; + + if (!(i % MRSAS_RESET_NOTICE_INTERVAL)) { + mrsas_dprint(sc, MRSAS_OCR, "[%2d]waiting for %d " + "commands to complete\n",i,outstanding); + mrsas_complete_cmd(sc); + } + DELAY(1000 * 1000); + } + + if (atomic_read(&sc->fw_outstanding)) { + mrsas_dprint(sc, MRSAS_OCR, + " pending commands remain after waiting," + " will reset adapter.\n"); + retval = 1; + } +out: + return retval; +} + +/** + * mrsas_release_mfi_cmd: Return a cmd to free command pool + * input: Command packet for return to free cmd pool + * + * This function returns the MFI command to the command list. + */ +void mrsas_release_mfi_cmd(struct mrsas_mfi_cmd *cmd) +{ + struct mrsas_softc *sc = cmd->sc; + + mtx_lock(&sc->mfi_cmd_pool_lock); + cmd->ccb_ptr = NULL; + cmd->cmd_id.frame_count = 0; + TAILQ_INSERT_TAIL(&(sc->mrsas_mfi_cmd_list_head), cmd, next); + mtx_unlock(&sc->mfi_cmd_pool_lock); + + return; +} + +/** + * mrsas_get_controller_info - Returns FW's controller structure + * input: Adapter soft state + * Controller information structure + * + * Issues an internal command (DCMD) to get the FW's controller structure. + * This information is mainly used to find out the maximum IO transfer per + * command supported by the FW. + */ +static int mrsas_get_ctrl_info(struct mrsas_softc *sc, + struct mrsas_ctrl_info *ctrl_info) +{ + int retcode = 0; + struct mrsas_mfi_cmd *cmd; + struct mrsas_dcmd_frame *dcmd; + + cmd = mrsas_get_mfi_cmd(sc); + + if (!cmd) { + device_printf(sc->mrsas_dev, "Failed to get a free cmd\n"); + return -ENOMEM; + } + dcmd = &cmd->frame->dcmd; + + if (mrsas_alloc_ctlr_info_cmd(sc) != SUCCESS) { + device_printf(sc->mrsas_dev, "Cannot allocate get ctlr info cmd\n"); + mrsas_release_mfi_cmd(cmd); + return -ENOMEM; + } + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0xFF; + dcmd->sge_count = 1; + dcmd->flags = MFI_FRAME_DIR_READ; + dcmd->timeout = 0; + dcmd->pad_0 = 0; + dcmd->data_xfer_len = sizeof(struct mrsas_ctrl_info); + dcmd->opcode = MR_DCMD_CTRL_GET_INFO; + dcmd->sgl.sge32[0].phys_addr = sc->ctlr_info_phys_addr; + dcmd->sgl.sge32[0].length = sizeof(struct mrsas_ctrl_info); + + if (!mrsas_issue_polled(sc, cmd)) + memcpy(ctrl_info, sc->ctlr_info_mem, sizeof(struct mrsas_ctrl_info)); + else + retcode = 1; + + mrsas_free_ctlr_info_cmd(sc); + mrsas_release_mfi_cmd(cmd); + return(retcode); +} + +/** + * mrsas_alloc_ctlr_info_cmd: Allocates memory for controller info command + * input: Adapter soft state + * + * Allocates DMAable memory for the controller info internal command. + */ +int mrsas_alloc_ctlr_info_cmd(struct mrsas_softc *sc) +{ + int ctlr_info_size; + + /* Allocate get controller info command */ + ctlr_info_size = sizeof(struct mrsas_ctrl_info); + if (bus_dma_tag_create( sc->mrsas_parent_tag, // parent + 1, 0, // algnmnt, boundary + BUS_SPACE_MAXADDR_32BIT,// lowaddr + BUS_SPACE_MAXADDR, // highaddr + NULL, NULL, // filter, filterarg + ctlr_info_size, // maxsize + 1, // msegments + ctlr_info_size, // maxsegsize + BUS_DMA_ALLOCNOW, // flags + NULL, NULL, // lockfunc, lockarg + &sc->ctlr_info_tag)) { + device_printf(sc->mrsas_dev, "Cannot allocate ctlr info tag\n"); + return (ENOMEM); + } + if (bus_dmamem_alloc(sc->ctlr_info_tag, (void **)&sc->ctlr_info_mem, + BUS_DMA_NOWAIT, &sc->ctlr_info_dmamap)) { + device_printf(sc->mrsas_dev, "Cannot allocate ctlr info cmd mem\n"); + return (ENOMEM); + } + if (bus_dmamap_load(sc->ctlr_info_tag, sc->ctlr_info_dmamap, + sc->ctlr_info_mem, ctlr_info_size, mrsas_addr_cb, + &sc->ctlr_info_phys_addr, BUS_DMA_NOWAIT)) { + device_printf(sc->mrsas_dev, "Cannot load ctlr info cmd mem\n"); + return (ENOMEM); + } + + memset(sc->ctlr_info_mem, 0, ctlr_info_size); + return (0); +} + +/** + * mrsas_free_ctlr_info_cmd: Free memory for controller info command + * input: Adapter soft state + * + * Deallocates memory of the get controller info cmd. + */ +void mrsas_free_ctlr_info_cmd(struct mrsas_softc *sc) +{ + if (sc->ctlr_info_phys_addr) + bus_dmamap_unload(sc->ctlr_info_tag, sc->ctlr_info_dmamap); + if (sc->ctlr_info_mem != NULL) + bus_dmamem_free(sc->ctlr_info_tag, sc->ctlr_info_mem, sc->ctlr_info_dmamap); + if (sc->ctlr_info_tag != NULL) + bus_dma_tag_destroy(sc->ctlr_info_tag); +} + +/** + * mrsas_issue_polled: Issues a polling command + * inputs: Adapter soft state + * Command packet to be issued + * + * This function is for posting of internal commands to Firmware. MFI + * requires the cmd_status to be set to 0xFF before posting. The maximun + * wait time of the poll response timer is 180 seconds. + */ +int mrsas_issue_polled(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd) +{ + struct mrsas_header *frame_hdr = &cmd->frame->hdr; + u_int8_t max_wait = MRSAS_INTERNAL_CMD_WAIT_TIME; + int i, retcode = 0; + + frame_hdr->cmd_status = 0xFF; + frame_hdr->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE; + + /* Issue the frame using inbound queue port */ + if (mrsas_issue_dcmd(sc, cmd)) { + device_printf(sc->mrsas_dev, "Cannot issue DCMD internal command.\n"); + return(1); + } + + /* + * Poll response timer to wait for Firmware response. While this + * timer with the DELAY call could block CPU, the time interval for + * this is only 1 millisecond. + */ + if (frame_hdr->cmd_status == 0xFF) { + for (i=0; i < (max_wait * 1000); i++){ + if (frame_hdr->cmd_status == 0xFF) + DELAY(1000); + else + break; + } + } + if (frame_hdr->cmd_status != 0) + { + if (frame_hdr->cmd_status == 0xFF) + device_printf(sc->mrsas_dev, "DCMD timed out after %d seconds.\n", max_wait); + else + device_printf(sc->mrsas_dev, "DCMD failed, status = 0x%x\n", frame_hdr->cmd_status); + retcode = 1; + } + return(retcode); +} + +/** + * mrsas_issue_dcmd - Issues a MFI Pass thru cmd + * input: Adapter soft state + * mfi cmd pointer + * + * This function is called by mrsas_issued_blocked_cmd() and + * mrsas_issued_polled(), to build the MPT command and then fire the + * command to Firmware. + */ +int +mrsas_issue_dcmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd) +{ + MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc; + + req_desc = mrsas_build_mpt_cmd(sc, cmd); + if (!req_desc) { + device_printf(sc->mrsas_dev, "Cannot build MPT cmd.\n"); + return(1); + } + + mrsas_fire_cmd(sc, req_desc->addr.u.low, req_desc->addr.u.high); + + return(0); +} + +/** + * mrsas_build_mpt_cmd - Calls helper function to build Passthru cmd + * input: Adapter soft state + * mfi cmd to build + * + * This function is called by mrsas_issue_cmd() to build the MPT-MFI + * passthru command and prepares the MPT command to send to Firmware. + */ +MRSAS_REQUEST_DESCRIPTOR_UNION * +mrsas_build_mpt_cmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd) +{ + MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc; + u_int16_t index; + + if (mrsas_build_mptmfi_passthru(sc, cmd)) { + device_printf(sc->mrsas_dev, "Cannot build MPT-MFI passthru cmd.\n"); + return NULL; + } + + index = cmd->cmd_id.context.smid; + + req_desc = mrsas_get_request_desc(sc, index-1); + if(!req_desc) + return NULL; + + req_desc->addr.Words = 0; + req_desc->SCSIIO.RequestFlags = (MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO << MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); + + req_desc->SCSIIO.SMID = index; + + return(req_desc); +} + +/** + * mrsas_build_mptmfi_passthru - Builds a MPT MFI Passthru command + * input: Adapter soft state + * mfi cmd pointer + * + * The MPT command and the io_request are setup as a passthru command. + * The SGE chain address is set to frame_phys_addr of the MFI command. + */ +u_int8_t +mrsas_build_mptmfi_passthru(struct mrsas_softc *sc, struct mrsas_mfi_cmd *mfi_cmd) +{ + MPI25_IEEE_SGE_CHAIN64 *mpi25_ieee_chain; + PTR_MRSAS_RAID_SCSI_IO_REQUEST io_req; + struct mrsas_mpt_cmd *mpt_cmd; + struct mrsas_header *frame_hdr = &mfi_cmd->frame->hdr; + + mpt_cmd = mrsas_get_mpt_cmd(sc); + if (!mpt_cmd) + return(1); + + /* Save the smid. To be used for returning the cmd */ + mfi_cmd->cmd_id.context.smid = mpt_cmd->index; + + mpt_cmd->sync_cmd_idx = mfi_cmd->index; + + /* + * For cmds where the flag is set, store the flag and check + * on completion. For cmds with this flag, don't call + * mrsas_complete_cmd. + */ + + if (frame_hdr->flags & MFI_FRAME_DONT_POST_IN_REPLY_QUEUE) + mpt_cmd->flags = MFI_FRAME_DONT_POST_IN_REPLY_QUEUE; + + io_req = mpt_cmd->io_request; + + if ((sc->device_id == MRSAS_INVADER) || (sc->device_id == MRSAS_FURY)) { + pMpi25IeeeSgeChain64_t sgl_ptr_end = (pMpi25IeeeSgeChain64_t) &io_req->SGL; + sgl_ptr_end += sc->max_sge_in_main_msg - 1; + sgl_ptr_end->Flags = 0; + } + + mpi25_ieee_chain = (MPI25_IEEE_SGE_CHAIN64 *)&io_req->SGL.IeeeChain; + + io_req->Function = MRSAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST; + io_req->SGLOffset0 = offsetof(MRSAS_RAID_SCSI_IO_REQUEST, SGL) / 4; + io_req->ChainOffset = sc->chain_offset_mfi_pthru; + + mpi25_ieee_chain->Address = mfi_cmd->frame_phys_addr; + + mpi25_ieee_chain->Flags= IEEE_SGE_FLAGS_CHAIN_ELEMENT | + MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR; + + mpi25_ieee_chain->Length = MRSAS_MAX_SZ_CHAIN_FRAME; + + return(0); +} + +/** + * mrsas_issue_blocked_cmd - Synchronous wrapper around regular FW cmds + * input: Adapter soft state + * Command to be issued + * + * This function waits on an event for the command to be returned + * from the ISR. Max wait time is MRSAS_INTERNAL_CMD_WAIT_TIME secs. + * Used for issuing internal and ioctl commands. + */ +int mrsas_issue_blocked_cmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd) +{ + u_int8_t max_wait = MRSAS_INTERNAL_CMD_WAIT_TIME; + unsigned long total_time = 0; + int retcode = 0; + + /* Initialize cmd_status */ + cmd->cmd_status = ECONNREFUSED; + + /* Build MPT-MFI command for issue to FW */ + if (mrsas_issue_dcmd(sc, cmd)){ + device_printf(sc->mrsas_dev, "Cannot issue DCMD internal command.\n"); + return(1); + } + + sc->chan = (void*)&cmd; + + /* The following is for debug only... */ + //device_printf(sc->mrsas_dev,"DCMD issued to FW, about to sleep-wait...\n"); + //device_printf(sc->mrsas_dev,"sc->chan = %p\n", sc->chan); + + while (1) { + if (cmd->cmd_status == ECONNREFUSED){ + tsleep((void *)&sc->chan, 0, "mrsas_sleep", hz); + } + else + break; + total_time++; + if (total_time >= max_wait) { + device_printf(sc->mrsas_dev, "Internal command timed out after %d seconds.\n", max_wait); + retcode = 1; + break; + } + } + return(retcode); +} + +/** + * mrsas_complete_mptmfi_passthru - Completes a command + * input: sc: Adapter soft state + * cmd: Command to be completed + * status: cmd completion status + * + * This function is called from mrsas_complete_cmd() after an interrupt + * is received from Firmware, and io_request->Function is + * MRSAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST. + */ +void +mrsas_complete_mptmfi_passthru(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd, + u_int8_t status) +{ + struct mrsas_header *hdr = &cmd->frame->hdr; + u_int8_t cmd_status = cmd->frame->hdr.cmd_status; + + /* Reset the retry counter for future re-tries */ + cmd->retry_for_fw_reset = 0; + + if (cmd->ccb_ptr) + cmd->ccb_ptr = NULL; + + switch (hdr->cmd) { + case MFI_CMD_INVALID: + device_printf(sc->mrsas_dev, "MFI_CMD_INVALID command.\n"); + break; + case MFI_CMD_PD_SCSI_IO: + case MFI_CMD_LD_SCSI_IO: + /* + * MFI_CMD_PD_SCSI_IO and MFI_CMD_LD_SCSI_IO could have been + * issued either through an IO path or an IOCTL path. If it + * was via IOCTL, we will send it to internal completion. + */ + if (cmd->sync_cmd) { + cmd->sync_cmd = 0; + mrsas_wakeup(sc, cmd); + break; + } + case MFI_CMD_SMP: + case MFI_CMD_STP: + case MFI_CMD_DCMD: + /* Check for LD map update */ + if ((cmd->frame->dcmd.opcode == MR_DCMD_LD_MAP_GET_INFO) && + (cmd->frame->dcmd.mbox.b[1] == 1)) { + sc->fast_path_io = 0; + mtx_lock(&sc->raidmap_lock); + if (cmd_status != 0) { + if (cmd_status != MFI_STAT_NOT_FOUND) + device_printf(sc->mrsas_dev, "map sync failed, status=%x\n",cmd_status); + else { + mrsas_release_mfi_cmd(cmd); + mtx_unlock(&sc->raidmap_lock); + break; + } + } + else + sc->map_id++; + mrsas_release_mfi_cmd(cmd); + if (MR_ValidateMapInfo(sc)) + sc->fast_path_io = 0; + else + sc->fast_path_io = 1; + mrsas_sync_map_info(sc); + mtx_unlock(&sc->raidmap_lock); + break; + } +#if 0 //currently not supporting event handling, so commenting out + if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET_INFO || + cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET) { + mrsas_poll_wait_aen = 0; + } +#endif + /* See if got an event notification */ + if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_WAIT) + mrsas_complete_aen(sc, cmd); + else + mrsas_wakeup(sc, cmd); + break; + case MFI_CMD_ABORT: + /* Command issued to abort another cmd return */ + mrsas_complete_abort(sc, cmd); + break; + default: + device_printf(sc->mrsas_dev,"Unknown command completed! [0x%X]\n", hdr->cmd); + break; + } +} + +/** + * mrsas_wakeup - Completes an internal command + * input: Adapter soft state + * Command to be completed + * + * In mrsas_issue_blocked_cmd(), after a command is issued to Firmware, + * a wait timer is started. This function is called from + * mrsas_complete_mptmfi_passthru() as it completes the command, + * to wake up from the command wait. + */ +void mrsas_wakeup(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd) +{ + cmd->cmd_status = cmd->frame->io.cmd_status; + + if (cmd->cmd_status == ECONNREFUSED) + cmd->cmd_status = 0; + + /* For debug only ... */ + //device_printf(sc->mrsas_dev,"DCMD rec'd for wakeup, sc->chan=%p\n", sc->chan); + + sc->chan = (void*)&cmd; + wakeup_one((void *)&sc->chan); + return; +} + +/** + * mrsas_shutdown_ctlr: Instructs FW to shutdown the controller + * input: Adapter soft state + * Shutdown/Hibernate + * + * This function issues a DCMD internal command to Firmware to initiate + * shutdown of the controller. + */ +static void mrsas_shutdown_ctlr(struct mrsas_softc *sc, u_int32_t opcode) +{ + struct mrsas_mfi_cmd *cmd; + struct mrsas_dcmd_frame *dcmd; + + if (sc->adprecovery == MRSAS_HW_CRITICAL_ERROR) + return; + + cmd = mrsas_get_mfi_cmd(sc); + if (!cmd) { + device_printf(sc->mrsas_dev,"Cannot allocate for shutdown cmd.\n"); + return; + } + + if (sc->aen_cmd) + mrsas_issue_blocked_abort_cmd(sc, sc->aen_cmd); + + if (sc->map_update_cmd) + mrsas_issue_blocked_abort_cmd(sc, sc->map_update_cmd); + + dcmd = &cmd->frame->dcmd; + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0x0; + dcmd->sge_count = 0; + dcmd->flags = MFI_FRAME_DIR_NONE; + dcmd->timeout = 0; + dcmd->pad_0 = 0; + dcmd->data_xfer_len = 0; + dcmd->opcode = opcode; + + device_printf(sc->mrsas_dev,"Preparing to shut down controller.\n"); + + mrsas_issue_blocked_cmd(sc, cmd); + mrsas_release_mfi_cmd(cmd); + + return; +} + +/** + * mrsas_flush_cache: Requests FW to flush all its caches + * input: Adapter soft state + * + * This function is issues a DCMD internal command to Firmware to initiate + * flushing of all caches. + */ +static void mrsas_flush_cache(struct mrsas_softc *sc) +{ + struct mrsas_mfi_cmd *cmd; + struct mrsas_dcmd_frame *dcmd; + + if (sc->adprecovery == MRSAS_HW_CRITICAL_ERROR) + return; + + cmd = mrsas_get_mfi_cmd(sc); + if (!cmd) { + device_printf(sc->mrsas_dev,"Cannot allocate for flush cache cmd.\n"); + return; + } + + dcmd = &cmd->frame->dcmd; + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0x0; + dcmd->sge_count = 0; + dcmd->flags = MFI_FRAME_DIR_NONE; + dcmd->timeout = 0; + dcmd->pad_0 = 0; + dcmd->data_xfer_len = 0; + dcmd->opcode = MR_DCMD_CTRL_CACHE_FLUSH; + dcmd->mbox.b[0] = MR_FLUSH_CTRL_CACHE | MR_FLUSH_DISK_CACHE; + + mrsas_issue_blocked_cmd(sc, cmd); + mrsas_release_mfi_cmd(cmd); + + return; +} + +/** + * mrsas_get_map_info: Load and validate RAID map + * input: Adapter instance soft state + * + * This function calls mrsas_get_ld_map_info() and MR_ValidateMapInfo() + * to load and validate RAID map. It returns 0 if successful, 1 other- + * wise. + */ +static int mrsas_get_map_info(struct mrsas_softc *sc) +{ + uint8_t retcode = 0; + + sc->fast_path_io = 0; + if (!mrsas_get_ld_map_info(sc)) { + retcode = MR_ValidateMapInfo(sc); + if (retcode == 0) { + sc->fast_path_io = 1; + return 0; + } + } + return 1; +} + +/** + * mrsas_get_ld_map_info: Get FW's ld_map structure + * input: Adapter instance soft state + * + * Issues an internal command (DCMD) to get the FW's controller PD + * list structure. + */ +static int mrsas_get_ld_map_info(struct mrsas_softc *sc) +{ + int retcode = 0; + struct mrsas_mfi_cmd *cmd; + struct mrsas_dcmd_frame *dcmd; + MR_FW_RAID_MAP_ALL *map; + bus_addr_t map_phys_addr = 0; + + cmd = mrsas_get_mfi_cmd(sc); + if (!cmd) { + device_printf(sc->mrsas_dev, "Cannot alloc for ld map info cmd.\n"); + return 1; + } + + dcmd = &cmd->frame->dcmd; + + map = sc->raidmap_mem[(sc->map_id & 1)]; + map_phys_addr = sc->raidmap_phys_addr[(sc->map_id & 1)]; + if (!map) { + device_printf(sc->mrsas_dev, "Failed to alloc mem for ld map info.\n"); + mrsas_release_mfi_cmd(cmd); + return (ENOMEM); + } + memset(map, 0, sizeof(*map)); + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0xFF; + dcmd->sge_count = 1; + dcmd->flags = MFI_FRAME_DIR_READ; + dcmd->timeout = 0; + dcmd->pad_0 = 0; + dcmd->data_xfer_len = sc->map_sz; + dcmd->opcode = MR_DCMD_LD_MAP_GET_INFO; + dcmd->sgl.sge32[0].phys_addr = map_phys_addr; + dcmd->sgl.sge32[0].length = sc->map_sz; + if (!mrsas_issue_polled(sc, cmd)) + retcode = 0; + else + { + device_printf(sc->mrsas_dev, "Fail to send get LD map info cmd.\n"); + retcode = 1; + } + mrsas_release_mfi_cmd(cmd); + return(retcode); +} + +/** + * mrsas_sync_map_info: Get FW's ld_map structure + * input: Adapter instance soft state + * + * Issues an internal command (DCMD) to get the FW's controller PD + * list structure. + */ +static int mrsas_sync_map_info(struct mrsas_softc *sc) +{ + int retcode = 0, i; + struct mrsas_mfi_cmd *cmd; + struct mrsas_dcmd_frame *dcmd; + uint32_t size_sync_info, num_lds; + MR_LD_TARGET_SYNC *target_map = NULL; + MR_FW_RAID_MAP_ALL *map; + MR_LD_RAID *raid; + MR_LD_TARGET_SYNC *ld_sync; + bus_addr_t map_phys_addr = 0; + + cmd = mrsas_get_mfi_cmd(sc); + if (!cmd) { + device_printf(sc->mrsas_dev, "Cannot alloc for sync map info cmd\n"); + return 1; + } + + map = sc->raidmap_mem[sc->map_id & 1]; + num_lds = map->raidMap.ldCount; + + dcmd = &cmd->frame->dcmd; + size_sync_info = sizeof(MR_LD_TARGET_SYNC) * num_lds; + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + target_map = (MR_LD_TARGET_SYNC *)sc->raidmap_mem[(sc->map_id - 1) & 1]; + memset(target_map, 0, sizeof(MR_FW_RAID_MAP_ALL)); + + map_phys_addr = sc->raidmap_phys_addr[(sc->map_id - 1) & 1]; + + ld_sync = (MR_LD_TARGET_SYNC *)target_map; + + for (i = 0; i < num_lds; i++, ld_sync++) { + raid = MR_LdRaidGet(i, map); + ld_sync->targetId = MR_GetLDTgtId(i, map); + ld_sync->seqNum = raid->seqNum; + } + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0xFF; + dcmd->sge_count = 1; + dcmd->flags = MFI_FRAME_DIR_WRITE; + dcmd->timeout = 0; + dcmd->pad_0 = 0; + dcmd->data_xfer_len = sc->map_sz; + dcmd->mbox.b[0] = num_lds; + dcmd->mbox.b[1] = MRSAS_DCMD_MBOX_PEND_FLAG; + dcmd->opcode = MR_DCMD_LD_MAP_GET_INFO; + dcmd->sgl.sge32[0].phys_addr = map_phys_addr; + dcmd->sgl.sge32[0].length = sc->map_sz; + + sc->map_update_cmd = cmd; + if (mrsas_issue_dcmd(sc, cmd)) { + device_printf(sc->mrsas_dev, "Fail to send sync map info command.\n"); + return(1); + } + return(retcode); +} + +/** + * mrsas_get_pd_list: Returns FW's PD list structure + * input: Adapter soft state + * + * Issues an internal command (DCMD) to get the FW's controller PD + * list structure. This information is mainly used to find out about + * system supported by Firmware. + */ +static int mrsas_get_pd_list(struct mrsas_softc *sc) +{ + int retcode = 0, pd_index = 0, pd_count=0, pd_list_size; + struct mrsas_mfi_cmd *cmd; + struct mrsas_dcmd_frame *dcmd; + struct MR_PD_LIST *pd_list_mem; + struct MR_PD_ADDRESS *pd_addr; + bus_addr_t pd_list_phys_addr = 0; + struct mrsas_tmp_dcmd *tcmd; + + cmd = mrsas_get_mfi_cmd(sc); + if (!cmd) { + device_printf(sc->mrsas_dev, "Cannot alloc for get PD list cmd\n"); + return 1; + } + + dcmd = &cmd->frame->dcmd; + + tcmd = malloc(sizeof(struct mrsas_tmp_dcmd), M_MRSAS, M_NOWAIT); + pd_list_size = MRSAS_MAX_PD * sizeof(struct MR_PD_LIST); + if (mrsas_alloc_tmp_dcmd(sc, tcmd, pd_list_size) != SUCCESS) { + device_printf(sc->mrsas_dev, "Cannot alloc dmamap for get PD list cmd\n"); + mrsas_release_mfi_cmd(cmd); + return(ENOMEM); + } + else { + pd_list_mem = tcmd->tmp_dcmd_mem; + pd_list_phys_addr = tcmd->tmp_dcmd_phys_addr; + } + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->mbox.b[0] = MR_PD_QUERY_TYPE_EXPOSED_TO_HOST; + dcmd->mbox.b[1] = 0; + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0xFF; + dcmd->sge_count = 1; + dcmd->flags = MFI_FRAME_DIR_READ; + dcmd->timeout = 0; + dcmd->pad_0 = 0; + dcmd->data_xfer_len = MRSAS_MAX_PD * sizeof(struct MR_PD_LIST); + dcmd->opcode = MR_DCMD_PD_LIST_QUERY; + dcmd->sgl.sge32[0].phys_addr = pd_list_phys_addr; + dcmd->sgl.sge32[0].length = MRSAS_MAX_PD * sizeof(struct MR_PD_LIST); + + if (!mrsas_issue_polled(sc, cmd)) + retcode = 0; + else + retcode = 1; + + /* Get the instance PD list */ + pd_count = MRSAS_MAX_PD; + pd_addr = pd_list_mem->addr; + if (retcode == 0 && pd_list_mem->count < pd_count) { + memset(sc->local_pd_list, 0, MRSAS_MAX_PD * sizeof(struct mrsas_pd_list)); + for (pd_index = 0; pd_index < pd_list_mem->count; pd_index++) { + sc->local_pd_list[pd_addr->deviceId].tid = pd_addr->deviceId; + sc->local_pd_list[pd_addr->deviceId].driveType = pd_addr->scsiDevType; + sc->local_pd_list[pd_addr->deviceId].driveState = MR_PD_STATE_SYSTEM; + pd_addr++; + } + } + + /* Use mutext/spinlock if pd_list component size increase more than 32 bit. */ + memcpy(sc->pd_list, sc->local_pd_list, sizeof(sc->local_pd_list)); + mrsas_free_tmp_dcmd(tcmd); + mrsas_release_mfi_cmd(cmd); + free(tcmd, M_MRSAS); + return(retcode); +} + +/** + * mrsas_get_ld_list: Returns FW's LD list structure + * input: Adapter soft state + * + * Issues an internal command (DCMD) to get the FW's controller PD + * list structure. This information is mainly used to find out about + * supported by the FW. + */ +static int mrsas_get_ld_list(struct mrsas_softc *sc) +{ + int ld_list_size, retcode = 0, ld_index = 0, ids = 0; + struct mrsas_mfi_cmd *cmd; + struct mrsas_dcmd_frame *dcmd; + struct MR_LD_LIST *ld_list_mem; + bus_addr_t ld_list_phys_addr = 0; + struct mrsas_tmp_dcmd *tcmd; + + cmd = mrsas_get_mfi_cmd(sc); + if (!cmd) { + device_printf(sc->mrsas_dev, "Cannot alloc for get LD list cmd\n"); + return 1; + } + + dcmd = &cmd->frame->dcmd; + + tcmd = malloc(sizeof(struct mrsas_tmp_dcmd), M_MRSAS, M_NOWAIT); + ld_list_size = sizeof(struct MR_LD_LIST); + if (mrsas_alloc_tmp_dcmd(sc, tcmd, ld_list_size) != SUCCESS) { + device_printf(sc->mrsas_dev, "Cannot alloc dmamap for get LD list cmd\n"); + mrsas_release_mfi_cmd(cmd); + return(ENOMEM); + } + else { + ld_list_mem = tcmd->tmp_dcmd_mem; + ld_list_phys_addr = tcmd->tmp_dcmd_phys_addr; + } + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0xFF; + dcmd->sge_count = 1; + dcmd->flags = MFI_FRAME_DIR_READ; + dcmd->timeout = 0; + dcmd->data_xfer_len = sizeof(struct MR_LD_LIST); + dcmd->opcode = MR_DCMD_LD_GET_LIST; + dcmd->sgl.sge32[0].phys_addr = ld_list_phys_addr; + dcmd->sgl.sge32[0].length = sizeof(struct MR_LD_LIST); + dcmd->pad_0 = 0; + + if (!mrsas_issue_polled(sc, cmd)) + retcode = 0; + else + retcode = 1; + + /* Get the instance LD list */ + if ((retcode == 0) && (ld_list_mem->ldCount <= (MAX_LOGICAL_DRIVES))){ + sc->CurLdCount = ld_list_mem->ldCount; + memset(sc->ld_ids, 0xff, MRSAS_MAX_LD); + for (ld_index = 0; ld_index < ld_list_mem->ldCount; ld_index++) { + if (ld_list_mem->ldList[ld_index].state != 0) { + ids = ld_list_mem->ldList[ld_index].ref.ld_context.targetId; + sc->ld_ids[ids] = ld_list_mem->ldList[ld_index].ref.ld_context.targetId; + } + } + } + + mrsas_free_tmp_dcmd(tcmd); + mrsas_release_mfi_cmd(cmd); + free(tcmd, M_MRSAS); + return(retcode); +} + +/** + * mrsas_alloc_tmp_dcmd: Allocates memory for temporary command + * input: Adapter soft state + * Temp command + * Size of alloction + * + * Allocates DMAable memory for a temporary internal command. The allocated + * memory is initialized to all zeros upon successful loading of the dma + * mapped memory. + */ +int mrsas_alloc_tmp_dcmd(struct mrsas_softc *sc, struct mrsas_tmp_dcmd *tcmd, + int size) +{ + if (bus_dma_tag_create( sc->mrsas_parent_tag, // parent + 1, 0, // algnmnt, boundary + BUS_SPACE_MAXADDR_32BIT,// lowaddr + BUS_SPACE_MAXADDR, // highaddr + NULL, NULL, // filter, filterarg + size, // maxsize + 1, // msegments + size, // maxsegsize + BUS_DMA_ALLOCNOW, // flags + NULL, NULL, // lockfunc, lockarg + &tcmd->tmp_dcmd_tag)) { + device_printf(sc->mrsas_dev, "Cannot allocate tmp dcmd tag\n"); + return (ENOMEM); + } + if (bus_dmamem_alloc(tcmd->tmp_dcmd_tag, (void **)&tcmd->tmp_dcmd_mem, + BUS_DMA_NOWAIT, &tcmd->tmp_dcmd_dmamap)) { + device_printf(sc->mrsas_dev, "Cannot allocate tmp dcmd mem\n"); + return (ENOMEM); + } + if (bus_dmamap_load(tcmd->tmp_dcmd_tag, tcmd->tmp_dcmd_dmamap, + tcmd->tmp_dcmd_mem, size, mrsas_addr_cb, + &tcmd->tmp_dcmd_phys_addr, BUS_DMA_NOWAIT)) { + device_printf(sc->mrsas_dev, "Cannot load tmp dcmd mem\n"); + return (ENOMEM); + } + + memset(tcmd->tmp_dcmd_mem, 0, size); + return (0); +} + +/** + * mrsas_free_tmp_dcmd: Free memory for temporary command + * input: temporary dcmd pointer + * + * Deallocates memory of the temporary command for use in the construction + * of the internal DCMD. + */ +void mrsas_free_tmp_dcmd(struct mrsas_tmp_dcmd *tmp) +{ + if (tmp->tmp_dcmd_phys_addr) + bus_dmamap_unload(tmp->tmp_dcmd_tag, tmp->tmp_dcmd_dmamap); + if (tmp->tmp_dcmd_mem != NULL) + bus_dmamem_free(tmp->tmp_dcmd_tag, tmp->tmp_dcmd_mem, tmp->tmp_dcmd_dmamap); + if (tmp->tmp_dcmd_tag != NULL) + bus_dma_tag_destroy(tmp->tmp_dcmd_tag); +} + +/** + * mrsas_issue_blocked_abort_cmd: Aborts previously issued cmd + * input: Adapter soft state + * Previously issued cmd to be aborted + * + * This function is used to abort previously issued commands, such as AEN and + * RAID map sync map commands. The abort command is sent as a DCMD internal + * command and subsequently the driver will wait for a return status. The + * max wait time is MRSAS_INTERNAL_CMD_WAIT_TIME seconds. + */ +static int mrsas_issue_blocked_abort_cmd(struct mrsas_softc *sc, + struct mrsas_mfi_cmd *cmd_to_abort) +{ + struct mrsas_mfi_cmd *cmd; + struct mrsas_abort_frame *abort_fr; + u_int8_t retcode = 0; + unsigned long total_time = 0; + u_int8_t max_wait = MRSAS_INTERNAL_CMD_WAIT_TIME; + + cmd = mrsas_get_mfi_cmd(sc); + if (!cmd) { + device_printf(sc->mrsas_dev, "Cannot alloc for abort cmd\n"); + return(1); + } + + abort_fr = &cmd->frame->abort; + + /* Prepare and issue the abort frame */ + abort_fr->cmd = MFI_CMD_ABORT; + abort_fr->cmd_status = 0xFF; + abort_fr->flags = 0; + abort_fr->abort_context = cmd_to_abort->index; + abort_fr->abort_mfi_phys_addr_lo = cmd_to_abort->frame_phys_addr; + abort_fr->abort_mfi_phys_addr_hi = 0; + + cmd->sync_cmd = 1; + cmd->cmd_status = 0xFF; + + if (mrsas_issue_dcmd(sc, cmd)) { + device_printf(sc->mrsas_dev, "Fail to send abort command.\n"); + return(1); + } + + /* Wait for this cmd to complete */ + sc->chan = (void*)&cmd; + while (1) { + if (cmd->cmd_status == 0xFF){ + tsleep((void *)&sc->chan, 0, "mrsas_sleep", hz); + } + else + break; + total_time++; + if (total_time >= max_wait) { + device_printf(sc->mrsas_dev, "Abort cmd timed out after %d sec.\n", max_wait); + retcode = 1; + break; + } + } + + cmd->sync_cmd = 0; + mrsas_release_mfi_cmd(cmd); + return(retcode); +} + +/** + * mrsas_complete_abort: Completes aborting a command + * input: Adapter soft state + * Cmd that was issued to abort another cmd + * + * The mrsas_issue_blocked_abort_cmd() function waits for the command status + * to change after sending the command. This function is called from + * mrsas_complete_mptmfi_passthru() to wake up the sleep thread associated. + */ +void mrsas_complete_abort(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd) +{ + if (cmd->sync_cmd) { + cmd->sync_cmd = 0; + cmd->cmd_status = 0; + sc->chan = (void*)&cmd; + wakeup_one((void *)&sc->chan); + } + return; +} + +/** + * mrsas_aen_handler: Callback function for AEN processing from thread context. + * input: Adapter soft state + * + */ +void mrsas_aen_handler(struct mrsas_softc *sc) +{ + union mrsas_evt_class_locale class_locale; + int doscan = 0; + u_int32_t seq_num; + int error; + + if (!sc) { + device_printf(sc->mrsas_dev, "invalid instance!\n"); + return; + } + + if (sc->evt_detail_mem) { + switch (sc->evt_detail_mem->code) { + case MR_EVT_PD_INSERTED: + mrsas_get_pd_list(sc); + mrsas_bus_scan_sim(sc, sc->sim_1); + doscan = 0; + break; + case MR_EVT_PD_REMOVED: + mrsas_get_pd_list(sc); + mrsas_bus_scan_sim(sc, sc->sim_1); + doscan = 0; + break; + case MR_EVT_LD_OFFLINE: + case MR_EVT_CFG_CLEARED: + case MR_EVT_LD_DELETED: + mrsas_bus_scan_sim(sc, sc->sim_0); + doscan = 0; + break; + case MR_EVT_LD_CREATED: + mrsas_get_ld_list(sc); + mrsas_bus_scan_sim(sc, sc->sim_0); + doscan = 0; + break; + case MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED: + case MR_EVT_FOREIGN_CFG_IMPORTED: + case MR_EVT_LD_STATE_CHANGE: + doscan = 1; + break; + default: + doscan = 0; + break; + } + } else { + device_printf(sc->mrsas_dev, "invalid evt_detail\n"); + return; + } + if (doscan) { + mrsas_get_pd_list(sc); + mrsas_dprint(sc, MRSAS_AEN, "scanning ...sim 1\n"); + mrsas_bus_scan_sim(sc, sc->sim_1); + mrsas_get_ld_list(sc); + mrsas_dprint(sc, MRSAS_AEN, "scanning ...sim 0\n"); + mrsas_bus_scan_sim(sc, sc->sim_0); + } + + seq_num = sc->evt_detail_mem->seq_num + 1; + + // Register AEN with FW for latest sequence number plus 1 + class_locale.members.reserved = 0; + class_locale.members.locale = MR_EVT_LOCALE_ALL; + class_locale.members.class = MR_EVT_CLASS_DEBUG; + + if (sc->aen_cmd != NULL ) + return ; + + mtx_lock(&sc->aen_lock); + error = mrsas_register_aen(sc, seq_num, + class_locale.word); + mtx_unlock(&sc->aen_lock); + + if (error) + device_printf(sc->mrsas_dev, "register aen failed error %x\n", error); + +} + + +/** + * mrsas_complete_aen: Completes AEN command + * input: Adapter soft state + * Cmd that was issued to abort another cmd + * + * This function will be called from ISR and will continue + * event processing from thread context by enqueuing task + * in ev_tq (callback function "mrsas_aen_handler"). + */ +void mrsas_complete_aen(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd) +{ + /* + * Don't signal app if it is just an aborted previously registered aen + */ + if ((!cmd->abort_aen) && (sc->remove_in_progress == 0)) { + /* TO DO (?) */ + } + else + cmd->abort_aen = 0; + + sc->aen_cmd = NULL; + mrsas_release_mfi_cmd(cmd); + + if (!sc->remove_in_progress) + taskqueue_enqueue(sc->ev_tq, &sc->ev_task); + + return; +} + +static device_method_t mrsas_methods[] = { + DEVMETHOD(device_probe, mrsas_probe), + DEVMETHOD(device_attach, mrsas_attach), + DEVMETHOD(device_detach, mrsas_detach), + DEVMETHOD(device_suspend, mrsas_suspend), + DEVMETHOD(device_resume, mrsas_resume), + DEVMETHOD(bus_print_child, bus_generic_print_child), + DEVMETHOD(bus_driver_added, bus_generic_driver_added), + { 0, 0 } +}; + +static driver_t mrsas_driver = { + "mrsas", + mrsas_methods, + sizeof(struct mrsas_softc) +}; + +static devclass_t mrsas_devclass; +DRIVER_MODULE(mrsas, pci, mrsas_driver, mrsas_devclass, 0, 0); +MODULE_DEPEND(mrsas, cam, 1,1,1); + |