diff options
Diffstat (limited to 'sys/dev/mpr/mpi/mpi2_ioc.h')
| -rw-r--r-- | sys/dev/mpr/mpi/mpi2_ioc.h | 158 |
1 files changed, 147 insertions, 11 deletions
diff --git a/sys/dev/mpr/mpi/mpi2_ioc.h b/sys/dev/mpr/mpi/mpi2_ioc.h index 54f39a5..37f01c6 100644 --- a/sys/dev/mpr/mpi/mpi2_ioc.h +++ b/sys/dev/mpr/mpi/mpi2_ioc.h @@ -1,6 +1,6 @@ /*- * Copyright (c) 2012-2015 LSI Corp. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -34,14 +34,15 @@ /* * Copyright (c) 2000-2015 LSI Corporation. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies + * All rights reserved. * * * Name: mpi2_ioc.h * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * - * mpi2_ioc.h Version: 02.00.24 + * mpi2_ioc.h Version: 02.00.27 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -168,6 +169,17 @@ * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY. * Added Encrypted Hash Extended Image. * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS. + * 11-18-14 02.00.25 Updated copyright information. + * 03-16-15 02.00.26 Updated for MPI v2.6. + * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and + * MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT. + * Added MPI2_EVENT_PCIE_LINK_COUNTER and + * MPI26_EVENT_DATA_PCIE_LINK_COUNTER. + * Added MPI26_CTRL_OP_SHUTDOWN. + * Added MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG + * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS + * 08-25-15 02.00.27 Added IC ARCH Class based signature defines + * * -------------------------------------------------------------------------- */ @@ -200,8 +212,8 @@ typedef struct _MPI2_IOC_INIT_REQUEST U16 MsgVersion; /* 0x0C */ U16 HeaderVersion; /* 0x0E */ U32 Reserved5; /* 0x10 */ - U16 Reserved6; /* 0x14 */ - U8 Reserved7; /* 0x16 */ + U16 ConfigurationFlags; /* 0x14 */ + U8 HostPageSize; /* 0x16 */ U8 HostMSIxVectors; /* 0x17 */ U16 Reserved8; /* 0x18 */ U16 SystemRequestFrameSize; /* 0x1A */ @@ -329,7 +341,12 @@ typedef struct _MPI2_IOC_FACTS_REPLY U16 MaxDevHandle; /* 0x38 */ U16 MaxPersistentEntries; /* 0x3A */ U16 MinDevHandle; /* 0x3C */ - U16 Reserved4; /* 0x3E */ + U8 CurrentHostPageSize; /* 0x3E */ + U8 Reserved4; /* 0x3F */ + U8 SGEModifierMask; /* 0x40 */ + U8 SGEModifierValue; /* 0x41 */ + U8 SGEModifierShift; /* 0x42 */ + U8 Reserved5; /* 0x43 */ } MPI2_IOC_FACTS_REPLY, MPI2_POINTER PTR_MPI2_IOC_FACTS_REPLY, Mpi2IOCFactsReply_t, MPI2_POINTER pMpi2IOCFactsReply_t; @@ -383,8 +400,8 @@ typedef struct _MPI2_IOC_FACTS_REPLY #define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) /* ProtocolFlags */ -#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) #define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) +#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) /**************************************************************************** @@ -559,6 +576,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY #define MPI2_EVENT_TEMP_THRESHOLD (0x0027) #define MPI2_EVENT_HOST_MESSAGE (0x0028) #define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029) +#define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034) /* MPI v2.6 and later */ #define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E) #define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F) @@ -630,7 +648,7 @@ typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t; -/* Power Performance Change Event */ +/* Power Performance Change Event data */ typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE { @@ -656,6 +674,23 @@ typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE #define MPI2_EVENT_PM_MODE_STANDBY (0x06) +/* Active Cable Exception Event data */ + +typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT +{ + U32 ActiveCablePowerRequirement; /* 0x00 */ + U8 ReasonCode; /* 0x04 */ + U8 ReceptacleID; /* 0x05 */ + U16 Reserved1; /* 0x06 */ +} MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, + MPI2_POINTER PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, + Mpi26EventDataActiveCableExcept_t, + MPI2_POINTER pMpi26EventDataActiveCableExcept_t; + +/* defines for ReasonCode field */ +#define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) + + /* Hard Reset Received Event data */ typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED @@ -1130,7 +1165,6 @@ typedef struct _MPI2_EVENT_DATA_HBD_PHY #define MPI2_EVENT_HBD_DT_SAS (0x01) - /**************************************************************************** * EventAck message ****************************************************************************/ @@ -1348,6 +1382,7 @@ typedef struct _MPI2_FW_UPLOAD_REQUEST #define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) #define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) #define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) +#define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D) /* MPI v2.0 FWUpload TransactionContext Element */ typedef struct _MPI2_FW_UPLOAD_TCSGE @@ -1436,7 +1471,7 @@ typedef struct _MPI2_FW_IMAGE_HEADER U32 Reserved54; /* 0x54 */ U32 Reserved58; /* 0x58 */ U32 Reserved5C; /* 0x5C */ - U32 Reserved60; /* 0x60 */ + U32 BootFlags; /* 0x60 */ /* reserved in MPI v2.5 and earlier */ U32 FirmwareVersionNameWhat; /* 0x64 */ U8 FirmwareVersionName[32]; /* 0x68 */ U32 VendorNameWhat; /* 0x88 */ @@ -1462,18 +1497,27 @@ typedef struct _MPI2_FW_IMAGE_HEADER #define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00) #define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000) #define MPI2_FW_HEADER_SIGNATURE (0xEA000000) +#define MPI26_FW_HEADER_SIGNATURE (0xEB000000) /* Signature0 field */ #define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04) #define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A) +#define MPI26_FW_HEADER_SIGNATURE0_BASE (0x5AEAA500) /* Last byte is defined by architecture */ +#define MPI26_FW_HEADER_SIGNATURE0_ARC_0 (0x5A) +#define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00) +#define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01) +#define MPI26_FW_HEADER_SIGNATURE0 (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0) // legacy (0x5AEAA55A) +#define MPI26_FW_HEADER_SIGNATURE0_3516 (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1) /* Signature1 field */ #define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08) #define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5) +#define MPI26_FW_HEADER_SIGNATURE1 (0xA55AEAA5) /* Signature2 field */ #define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C) #define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA) +#define MPI26_FW_HEADER_SIGNATURE2 (0x5AA55AEA) /* defines for using the ProductID field */ @@ -1491,6 +1535,8 @@ typedef struct _MPI2_FW_IMAGE_HEADER #define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013) #define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014) #define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021) +#define MPI26_FW_HEADER_PID_FAMILY_3324_SAS (0x0028) +#define MPI26_FW_HEADER_PID_FAMILY_3516_SAS (0x0031) /* use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */ @@ -1499,6 +1545,7 @@ typedef struct _MPI2_FW_IMAGE_HEADER #define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C) #define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30) +#define MPI26_FW_HEADER_BOOTFLAGS_OFFSET (0x60) #define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64) #define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840) @@ -1612,7 +1659,10 @@ typedef struct _MPI2_FLASH_LAYOUT_DATA #define MPI2_FLASH_REGION_CONFIG_1 (0x07) #define MPI2_FLASH_REGION_CONFIG_2 (0x08) #define MPI2_FLASH_REGION_MEGARAID (0x09) -#define MPI2_FLASH_REGION_INIT (0x0A) +#define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A) +#define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK) /* older name */ +#define MPI2_FLASH_REGION_CBB_BACKUP (0x0D) + /* ImageRevision */ #define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00) @@ -1854,5 +1904,91 @@ typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY Mpi2PwrMgmtControlReply_t, MPI2_POINTER pMpi2PwrMgmtControlReply_t; +/**************************************************************************** +* IO Unit Control messages (MPI v2.6 and later only.) +****************************************************************************/ + +/* IO Unit Control Request Message */ +typedef struct _MPI26_IOUNIT_CONTROL_REQUEST +{ + U8 Operation; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 DevHandle; /* 0x04 */ + U8 IOCParameter; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U8 PhyNum; /* 0x0E */ + U8 PrimFlags; /* 0x0F */ + U32 Primitive; /* 0x10 */ + U8 LookupMethod; /* 0x14 */ + U8 Reserved5; /* 0x15 */ + U16 SlotNumber; /* 0x16 */ + U64 LookupAddress; /* 0x18 */ + U32 IOCParameterValue; /* 0x20 */ + U32 Reserved7; /* 0x24 */ + U32 Reserved8; /* 0x28 */ +} MPI26_IOUNIT_CONTROL_REQUEST, + MPI2_POINTER PTR_MPI26_IOUNIT_CONTROL_REQUEST, + Mpi26IoUnitControlRequest_t, MPI2_POINTER pMpi26IoUnitControlRequest_t; + +/* values for the Operation field */ +#define MPI26_CTRL_OP_CLEAR_ALL_PERSISTENT (0x02) +#define MPI26_CTRL_OP_SAS_PHY_LINK_RESET (0x06) +#define MPI26_CTRL_OP_SAS_PHY_HARD_RESET (0x07) +#define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG (0x08) +#define MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG (0x09) +#define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE (0x0A) +#define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY (0x0B) +#define MPI26_CTRL_OP_REMOVE_DEVICE (0x0D) +#define MPI26_CTRL_OP_LOOKUP_MAPPING (0x0E) +#define MPI26_CTRL_OP_SET_IOC_PARAMETER (0x0F) +#define MPI26_CTRL_OP_ENABLE_FP_DEVICE (0x10) +#define MPI26_CTRL_OP_DISABLE_FP_DEVICE (0x11) +#define MPI26_CTRL_OP_ENABLE_FP_ALL (0x12) +#define MPI26_CTRL_OP_DISABLE_FP_ALL (0x13) +#define MPI26_CTRL_OP_DEV_ENABLE_NCQ (0x14) +#define MPI26_CTRL_OP_DEV_DISABLE_NCQ (0x15) +#define MPI26_CTRL_OP_SHUTDOWN (0x16) +#define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17) +#define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18) +#define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19) +#define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80) + +/* values for the PrimFlags field */ +#define MPI26_CTRL_PRIMFLAGS_SINGLE (0x08) +#define MPI26_CTRL_PRIMFLAGS_TRIPLE (0x02) +#define MPI26_CTRL_PRIMFLAGS_REDUNDANT (0x01) + +/* values for the LookupMethod field */ +#define MPI26_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01) +#define MPI26_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02) +#define MPI26_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) + + +/* IO Unit Control Reply Message */ +typedef struct _MPI26_IOUNIT_CONTROL_REPLY +{ + U8 Operation; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 DevHandle; /* 0x04 */ + U8 IOCParameter; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI26_IOUNIT_CONTROL_REPLY, MPI2_POINTER PTR_MPI26_IOUNIT_CONTROL_REPLY, + Mpi26IoUnitControlReply_t, MPI2_POINTER pMpi26IoUnitControlReply_t; + + #endif |
