diff options
Diffstat (limited to 'sys/dev/mpr/mpi/mpi2.h')
| -rw-r--r-- | sys/dev/mpr/mpi/mpi2.h | 79 |
1 files changed, 67 insertions, 12 deletions
diff --git a/sys/dev/mpr/mpi/mpi2.h b/sys/dev/mpr/mpi/mpi2.h index 42fdec2..7084a85 100644 --- a/sys/dev/mpr/mpi/mpi2.h +++ b/sys/dev/mpr/mpi/mpi2.h @@ -1,6 +1,6 @@ /*- * Copyright (c) 2012-2015 LSI Corp. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -34,7 +34,8 @@ /* * Copyright (c) 2000-2015 LSI Corporation. - * Copyright (c) 2013-2015 Avago Technologies + * Copyright (c) 2013-2016 Avago Technologies + * All rights reserved. * * * Name: mpi2.h @@ -43,7 +44,7 @@ * scatter/gather formats. * Creation Date: June 21, 2006 * - * mpi2.h Version: 02.00.33 + * mpi2.h Version: 02.00.42 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -125,6 +126,22 @@ * 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT. * 08-19-13 02.00.32 Bumped MPI2_HEADER_VERSION_UNIT. * 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT. + * 01-08-14 02.00.34 Bumped MPI2_HEADER_VERSION_UNIT. + * 06-13-14 02.00.35 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-18-14 02.00.36 Updated copyright information. + * Bumped MPI2_HEADER_VERSION_UNIT. + * 03-16-15 02.00.37 Updated for MPI v2.6. + * Bumped MPI2_HEADER_VERSION_UNIT. + * Added Scratchpad registers to + * MPI2_SYSTEM_INTERFACE_REGS. + * Added MPI2_DIAG_SBR_RELOAD. + * Added MPI2_IOCSTATUS_INSUFFICIENT_POWER. + * 03-19-15 02.00.38 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-25-15 02.00.39 Bumped MPI2_HEADER_VERSION_UNIT + * 08-25-15 02.00.40 Bumped MPI2_HEADER_VERSION_UNIT. + * Added V7 HostDiagnostic register defines + * 12-15-15 02.00.41 Bumped MPI_HEADER_VERSION_UNIT + * 01-01-16 02.00.42 Bumped MPI_HEADER_VERSION_UNIT * -------------------------------------------------------------------------- */ @@ -160,8 +177,15 @@ #define MPI2_VERSION_02_05 (0x0205) +/* minor version for MPI v2.6 compatible products */ +#define MPI26_VERSION_MINOR (0x06) +#define MPI26_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \ + MPI26_VERSION_MINOR) +#define MPI2_VERSION_02_06 (0x0206) + + /* Unit and Dev versioning for this MPI header set */ -#define MPI2_HEADER_VERSION_UNIT (0x21) +#define MPI2_HEADER_VERSION_UNIT (0x2A) #define MPI2_HEADER_VERSION_DEV (0x00) #define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI2_HEADER_VERSION_UNIT_SHIFT (8) @@ -217,7 +241,8 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS U32 HCBSize; /* 0x74 */ U32 HCBAddressLow; /* 0x78 */ U32 HCBAddressHigh; /* 0x7C */ - U32 Reserved6[16]; /* 0x80 */ + U32 Reserved6[12]; /* 0x80 */ + U32 Scratchpad[4]; /* 0xB0 */ U32 RequestDescriptorPostLow; /* 0xC0 */ U32 RequestDescriptorPostHigh; /* 0xC4 */ U32 Reserved7[14]; /* 0xC8 */ @@ -261,10 +286,17 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS */ #define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008) +#define MPI2_DIAG_SBR_RELOAD (0x00002000) + #define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800) #define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000) #define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800) +/* Defines for V7A/V7R HostDiagnostic Register */ +#define MPI26_DIAG_BOOT_DEVICE_SELECT_FLASH64 (0x00000000) +#define MPI26_DIAG_BOOT_DEVICE_SELECT_HCDW64 (0x00000800) +#define MPI26_DIAG_BOOT_DEVICE_SELECT_FLASH32 (0x00001000) +#define MPI26_DIAG_BOOT_DEVICE_SELECT_HCDW32 (0x00001800) #define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400) #define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200) #define MPI2_DIAG_HCB_MODE (0x00000100) @@ -335,7 +367,15 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS #define MPI2_HCB_ADDRESS_HIGH_OFFSET (0x0000007C) /* - * Offsets for the Request Queue + * Offsets for the Scratchpad registers + */ +#define MPI26_SCRATCHPAD0_OFFSET (0x000000B0) +#define MPI26_SCRATCHPAD1_OFFSET (0x000000B4) +#define MPI26_SCRATCHPAD2_OFFSET (0x000000B8) +#define MPI26_SCRATCHPAD3_OFFSET (0x000000BC) + +/* + * Offsets for the Request Descriptor Post Queue */ #define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET (0x000000C0) #define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4) @@ -367,7 +407,8 @@ typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR Mpi2DefaultRequestDescriptor_t, MPI2_POINTER pMpi2DefaultRequestDescriptor_t; /* defines for the RequestFlags field */ -#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E) +#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x1E) +#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_RSHIFT (1) /* use carefully; values below are pre-shifted left */ #define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00) #define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02) #define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06) @@ -455,6 +496,10 @@ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t; + +/* for the RequestFlags field, use the same defines as MPI2_DEFAULT_REQUEST_DESCRIPTOR */ + + /* Reply Descriptors */ /* Default Reply Descriptor */ @@ -603,7 +648,8 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION #define MPI2_FUNCTION_TOOLBOX (0x17) /* Toolbox */ #define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) /* SCSI Enclosure Processor */ #define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A) /* SMP Passthrough */ -#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) /* SAS IO Unit Control */ +#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) /* SAS IO Unit Control */ /* for MPI v2.5 and earlier */ +#define MPI2_FUNCTION_IO_UNIT_CONTROL (0x1B) /* IO Unit Control */ /* for MPI v2.6 and later */ #define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C) /* SATA Passthrough */ #define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D) /* Diagnostic Buffer Post */ #define MPI2_FUNCTION_DIAG_RELEASE (0x1E) /* Diagnostic Release */ @@ -646,6 +692,7 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION #define MPI2_IOCSTATUS_INVALID_FIELD (0x0007) #define MPI2_IOCSTATUS_INVALID_STATE (0x0008) #define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009) +#define MPI2_IOCSTATUS_INSUFFICIENT_POWER (0x000A) /* MPI v2.6 and later */ /**************************************************************************** * Config IOCStatus values @@ -1123,7 +1170,7 @@ typedef union _MPI2_IEEE_SGE_CHAIN_UNION } MPI2_IEEE_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_CHAIN_UNION, Mpi2IeeeSgeChainUnion_t, MPI2_POINTER pMpi2IeeeSgeChainUnion_t; -/* MPI25_IEEE_SGE_CHAIN64 is for MPI v2.5 products only */ +/* MPI25_IEEE_SGE_CHAIN64 is for MPI v2.5 and later */ typedef struct _MPI25_IEEE_SGE_CHAIN64 { U64 Address; @@ -1181,16 +1228,23 @@ typedef union _MPI25_SGE_IO_UNION #define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00) #define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80) +/* Next Segment Format */ + +#define MPI26_IEEE_SGE_FLAGS_NSF_MASK (0x1C) +#define MPI26_IEEE_SGE_FLAGS_NSF_MPI_IEEE (0x00) + /* Data Location Address Space */ #define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03) -#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00) /* for MPI v2.0, use in IEEE Simple Element only; for MPI v2.5, use in IEEE Simple or Chain element */ +#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00) /* for MPI v2.0, use in IEEE Simple Element only; for MPI v2.5 and later, use in IEEE Simple or Chain element */ #define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01) /* use in IEEE Simple Element only */ #define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02) #define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03) /* for MPI v2.0, use in IEEE Simple Element only; for MPI v2.5, use in IEEE Simple or Chain element */ #define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR (0x03) /* use in MPI v2.0 IEEE Chain Element only */ #define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR (MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR) /* typo in name */ +#define MPI26_IEEE_SGE_FLAGS_IOCCTL_ADDR (0x02) /* for MPI v2.6 only */ + /**************************************************************************** * IEEE SGE operation Macros ****************************************************************************/ @@ -1246,8 +1300,9 @@ typedef union _MPI2_SGE_IO_UNION #define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK (0x0C) #define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE (0x00) #define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE (0x04) -#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08) -#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C) +#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08) /* only for MPI v2.5 and earlier */ +#define MPI26_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08) /* only for MPI v2.6 */ +#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C) /* only for MPI v2.5 and earlier */ /* values for SGL Type subfield */ #define MPI2_SGLFLAGS_SGL_TYPE_MASK (0x03) #define MPI2_SGLFLAGS_SGL_TYPE_MPI (0x00) |
