diff options
Diffstat (limited to 'sys/dev/mlx/mlxvar.h')
-rw-r--r-- | sys/dev/mlx/mlxvar.h | 247 |
1 files changed, 247 insertions, 0 deletions
diff --git a/sys/dev/mlx/mlxvar.h b/sys/dev/mlx/mlxvar.h new file mode 100644 index 0000000..f5b68e5 --- /dev/null +++ b/sys/dev/mlx/mlxvar.h @@ -0,0 +1,247 @@ +/*- + * Copyright (c) 1999 Michael Smith + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +/* + * Debugging levels: + * 0 - quiet, only emit warnings + * 1 - noisy, emit major function points and things done + * 2 - extremely noisy, emit trace items in loops, etc. + */ +#ifdef MLX_DEBUG +#define debug(level, fmt, args...) do { if (level <= MLX_DEBUG) printf("%s: " fmt "\n", __func__ , ##args); } while(0) +#define debug_called(level) do { if (level <= MLX_DEBUG) printf(__func__ ": called\n"); } while(0) +#else +#define debug(level, fmt, args...) +#define debug_called(level) +#endif + +/* + * Regardless of the actual capacity of the controller, we will allocate space + * for 64 s/g entries. Typically controllers support 17 or 33 entries (64k or + * 128k maximum transfer assuming 4k page size and non-optimal alignment), but + * making that fit cleanly without crossing page boundaries requires rounding up + * to the next power of two. + */ +#define MLX_NSEG 64 + +#define MLX_NSLOTS 256 /* max number of command slots */ + +#define MLX_MAXDRIVES 32 /* max number of system drives */ + +/* + * Structure describing a System Drive as attached to the controller. + */ +struct mlx_sysdrive +{ + /* from MLX_CMD_ENQSYSDRIVE */ + u_int32_t ms_size; + int ms_state; + int ms_raidlevel; + + /* synthetic geometry */ + int ms_cylinders; + int ms_heads; + int ms_sectors; + + /* handle for attached driver */ + device_t ms_disk; +}; + +/* + * Per-command control structure. + */ +struct mlx_command +{ + TAILQ_ENTRY(mlx_command) mc_link; /* list linkage */ + + struct mlx_softc *mc_sc; /* controller that owns us */ + u_int8_t mc_slot; /* command slot we occupy */ + u_int16_t mc_status; /* command completion status */ + time_t mc_timeout; /* when this command expires */ + u_int8_t mc_mailbox[16]; /* command mailbox */ + u_int32_t mc_sgphys; /* physical address of s/g array in controller space */ + int mc_nsgent; /* number of entries in s/g map */ + int mc_flags; +#define MLX_CMD_DATAIN (1<<0) +#define MLX_CMD_DATAOUT (1<<1) +#define MLX_CMD_PRIORITY (1<<2) /* high-priority command */ + + void *mc_data; /* data buffer */ + size_t mc_length; + bus_dmamap_t mc_dmamap; /* DMA map for data */ + u_int32_t mc_dataphys; /* data buffer base address controller space */ + + void (* mc_complete)(struct mlx_command *mc); /* completion handler */ + void *mc_private; /* submitter-private data or wait channel */ +}; + +/* + * Per-controller structure. + */ +struct mlx_softc +{ + /* bus connections */ + device_t mlx_dev; + dev_t mlx_dev_t; + struct resource *mlx_mem; /* mailbox interface window */ + int mlx_mem_rid; + int mlx_mem_type; + bus_space_handle_t mlx_bhandle; /* bus space handle */ + bus_space_tag_t mlx_btag; /* bus space tag */ + bus_dma_tag_t mlx_parent_dmat;/* parent DMA tag */ + bus_dma_tag_t mlx_buffer_dmat;/* data buffer DMA tag */ + struct resource *mlx_irq; /* interrupt */ + void *mlx_intr; /* interrupt handle */ + + /* scatter/gather lists and their controller-visible mappings */ + struct mlx_sgentry *mlx_sgtable; /* s/g lists */ + u_int32_t mlx_sgbusaddr; /* s/g table base address in bus space */ + bus_dma_tag_t mlx_sg_dmat; /* s/g buffer DMA tag */ + bus_dmamap_t mlx_sg_dmamap; /* map for s/g buffers */ + + /* controller limits and features */ + struct mlx_enquiry2 *mlx_enq2; + int mlx_feature; /* controller features/quirks */ +#define MLX_FEAT_PAUSEWORKS (1<<0) /* channel pause works as expected */ + + /* controller queues and arrays */ + TAILQ_HEAD(, mlx_command) mlx_freecmds; /* command structures available for reuse */ + TAILQ_HEAD(, mlx_command) mlx_work; /* active commands */ + struct mlx_command *mlx_busycmd[MLX_NSLOTS]; /* busy commands */ + int mlx_busycmds; /* count of busy commands */ + struct mlx_sysdrive mlx_sysdrive[MLX_MAXDRIVES]; /* system drives */ + mlx_bioq mlx_bioq; /* outstanding I/O operations */ + int mlx_waitbufs; /* number of bufs awaiting commands */ + + /* controller status */ + int mlx_geom; +#define MLX_GEOM_128_32 0 /* geoemetry translation modes */ +#define MLX_GEOM_256_63 1 + int mlx_state; +#define MLX_STATE_INTEN (1<<0) /* interrupts have been enabled */ +#define MLX_STATE_SHUTDOWN (1<<1) /* controller is shut down */ +#define MLX_STATE_OPEN (1<<2) /* control device is open */ +#define MLX_STATE_SUSPEND (1<<3) /* controller is suspended */ + struct callout_handle mlx_timeout; /* periodic status monitor */ + time_t mlx_lastpoll; /* last time_second we polled for status */ + u_int16_t mlx_lastevent; /* sequence number of the last event we recorded */ + int mlx_currevent; /* sequence number last time we looked */ + int mlx_background; /* if != 0 rebuild or check is in progress */ +#define MLX_BACKGROUND_CHECK 1 /* we started a check */ +#define MLX_BACKGROUND_REBUILD 2 /* we started a rebuild */ +#define MLX_BACKGROUND_SPONTANEOUS 3 /* it just happened somehow */ + struct mlx_rebuild_status mlx_rebuildstat; /* last rebuild status */ + struct mlx_pause mlx_pause; /* pending pause operation details */ + + int mlx_locks; /* reentrancy avoidance */ + int mlx_flags; +#define MLX_SPINUP_REPORTED (1<<0) /* "spinning up drives" message displayed */ +#define MLX_EVENTLOG_BUSY (1<<1) /* currently reading event log */ + + /* interface-specific accessor functions */ + int mlx_iftype; /* interface protocol */ +#define MLX_IFTYPE_2 2 +#define MLX_IFTYPE_3 3 +#define MLX_IFTYPE_4 4 +#define MLX_IFTYPE_5 5 + int (* mlx_tryqueue)(struct mlx_softc *sc, struct mlx_command *mc); + int (* mlx_findcomplete)(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status); + void (* mlx_intaction)(struct mlx_softc *sc, int action); + int (* mlx_fw_handshake)(struct mlx_softc *sc, int *error, int *param1, int *param2); +#define MLX_INTACTION_DISABLE 0 +#define MLX_INTACTION_ENABLE 1 +}; + +/* + * Simple (stupid) locks. + * + * Note that these are designed to avoid reentrancy, not concurrency, and will + * need to be replaced with something better. + */ +#define MLX_LOCK_COMPLETING (1<<0) +#define MLX_LOCK_STARTING (1<<1) + +static __inline int +mlx_lock_tas(struct mlx_softc *sc, int lock) +{ + if ((sc)->mlx_locks & (lock)) + return(1); + atomic_set_int(&sc->mlx_locks, lock); + return(0); +} + +static __inline void +mlx_lock_clr(struct mlx_softc *sc, int lock) +{ + atomic_clear_int(&sc->mlx_locks, lock); +} + +/* + * Interface between bus connections and driver core. + */ +extern void mlx_free(struct mlx_softc *sc); +extern int mlx_attach(struct mlx_softc *sc); +extern void mlx_startup(struct mlx_softc *sc); +extern void mlx_intr(void *data); +extern int mlx_detach(device_t dev); +extern int mlx_shutdown(device_t dev); +extern int mlx_suspend(device_t dev); +extern int mlx_resume(device_t dev); +extern d_open_t mlx_open; +extern d_close_t mlx_close; +extern d_ioctl_t mlx_ioctl; + +extern devclass_t mlx_devclass; +extern devclass_t mlxd_devclass; + +/* + * Mylex System Disk driver + */ +struct mlxd_softc +{ + device_t mlxd_dev; + dev_t mlxd_dev_t; + struct mlx_softc *mlxd_controller; + struct mlx_sysdrive *mlxd_drive; + struct disk mlxd_disk; + struct devstat mlxd_stats; + int mlxd_unit; + int mlxd_flags; +#define MLXD_OPEN (1<<0) /* drive is open (can't shut down) */ +}; + +/* + * Interface between driver core and disk driver (should be using a bus?) + */ +extern int mlx_submit_buf(struct mlx_softc *sc, mlx_bio *bp); +extern int mlx_submit_ioctl(struct mlx_softc *sc, + struct mlx_sysdrive *drive, u_long cmd, + caddr_t addr, int32_t flag, struct thread *td); +extern void mlxd_intr(void *data); + + |