diff options
Diffstat (limited to 'sys/dev/mii/icsphyreg.h')
-rw-r--r-- | sys/dev/mii/icsphyreg.h | 136 |
1 files changed, 136 insertions, 0 deletions
diff --git a/sys/dev/mii/icsphyreg.h b/sys/dev/mii/icsphyreg.h new file mode 100644 index 0000000..22e4486 --- /dev/null +++ b/sys/dev/mii/icsphyreg.h @@ -0,0 +1,136 @@ +/* $NetBSD: icsphyreg.h,v 1.2 2003/07/01 22:46:08 msaitoh Exp $ */ + +/*- + * Copyright (c) 1998 The NetBSD Foundation, Inc. + * All rights reserved. + * + * This code is derived from software contributed to The NetBSD Foundation + * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, + * NASA Ames Research Center. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the NetBSD + * Foundation, Inc. and its contributors. + * 4. Neither the name of The NetBSD Foundation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD$ + */ + +#ifndef _DEV_MII_ICSPHYREG_H_ +#define _DEV_MII_ICSPHYREG_H_ + +/* + * ICS1890 registers. + * http://www.icst.com/pdf/18??.pdf + */ + +/* HEX 1889 1890 1892 1893 + *-------------------------------------------------------------- + * 0 Control * * * * + * 1 Status * * * * + * 2 PHY Identifier * * * * + * 3 PHY Identifier * * * * + * 4 Auto-Neg. Advertisement * * * + * 5 Auto-Neg. Link Parent Adv * * * + * 6 Auto-Neg. Expansion * * * + * 7 Auto-Neg. Next Page Tx * * + * 8 ANg Nxt Page Lnk Parnt Abl * * + * 10 Extended Control * * * * + * 11 Quick Poll Status * * * * + * 12 10Base-T Operation * * * + * 13 Extended Control2 * * * + */ + +#define MII_ICSPHY_ECR 0x10 /* Extended Control Register */ +#define ECR_OVR 0x8000 /* disable command reg overwrites */ +#define ECR_PHYADDR_MASK 0x07c0 /* PHY address mask */ +#define ECR_CTEST 0x0020 /* Stream Cipher Test Mode */ +#define ECR_IECT 0x0004 /* Invalid Error Code Test */ +#define ECR_SSD 0x0001 /* Stream Cipher Disable */ + +#define MII_ICSPHY_QPR 0x11 /* Quick Poll Register */ +#define QPR_SPEED 0x8000 /* 100Mbps */ +#define QPR_FDX 0x4000 /* Full dupled */ +#define QPR_ANB2 0x2000 /* Autoneg monitor bit 2 */ +#define QPR_ANB1 0x1000 /* Autoneg monitor bit 1 */ +#define QPR_ANB0 0x0800 /* Autoneg monitor bit 0 */ +#define QPR_RXERR 0x0400 /* Receive signal lost */ +#define QPR_PLLERR 0x0200 /* PLL error */ +#define QPR_FCARR 0x0100 /* False carrier detected */ +#define QPR_INVALSYM 0x0080 /* Invalid Symbol Detected */ +#define QPR_HALT 0x0040 /* Halt Symbol Detected */ +#define QPR_PREEM 0x0020 /* Two Idle Symbols together */ +#define QPR_ACOMP 0x0010 /* Autonegotiation complete */ +#define QPR_SDETECT 0x0008 /* signal detect */ +#define QPR_JABBER 0x0004 /* Jabber detected */ +#define QPR_RFAULT 0x0002 /* Remote Fault */ +#define QPR_LINK 0x0001 /* Link */ + +#define MII_ICSPHY_TTR 0x12 /* 10baseT Operations Register */ +#define TTR_RJABBER 0x8000 /* Remote Jabber */ +#define TTR_POLARITY 0x4000 /* Polarity Reversed */ +#define TTR_NOJABBER 0x0020 /* Disable Jabber Check */ +#define TTR_LOOP 0x0010 /* Loopback mode */ +#define TTR_NOAPOLARITY 0x0008 /* Disable auto polarity correction */ +#define TTR_NOSQE 0x0004 /* Disable SQE check */ +#define TTR_NOLINK 0x0002 /* Disable Link check */ +#define TTR_NOSQUELCH 0x0001 /* Disable squelch */ + + +/* + * Extended Control Register 2 + * + * HEX 1889 1890 1892 1893 + *------------------------------------------------------------------- + * 8000 Node/Repeater Mode * * * + * 4000 Hardware/Software Mode * * * + * 2000 Link Partner Support Remote Flt * + * 2000 Remote Fault * * + * 1000 + * 0800 + * 0400 Xmitted Remote Fault status * + * 0200 + * 0100 + * 0080 Tri-state Enable * + * 0040 + * 0020 + * 0010 A-N Powerup Remote Flt * + * 0008 + * 0004 + * 0002 Automatic 10Base-T Power Down * + * 0001 Automatic 100Base-TX Power Down * * * + */ + +#define MII_ICSPHY_ECR2 0x13 /* Extended Control Register 2 */ +#define ECR2_REPEATER 0x8000 /* Repeater Mode */ +#define ECR2_HWSW 0x4000 /* hw/sw config priority */ +#define ECR2_LPRF 0x2000 /* link partner supports rem fault */ +#define ECR2_FORCERF 0x0400 /* Force transmit of rem fault */ +#define ECR2_RFPUP 0x0010 /* A-N Powerup Remote fault */ +#define ECR2_10AUTOPWRDN 0x0002 /* Automatic 10baseT power down */ +#define ECR2_100AUTOPWRDN 0x0001 /* Automatic 100baseTX power down */ + +#endif /* _DEV_MII_ICSPHYREG_H_ */ |