diff options
Diffstat (limited to 'sys/dev/ixgbe/ixgbe_x550.c')
| -rw-r--r-- | sys/dev/ixgbe/ixgbe_x550.c | 220 |
1 files changed, 126 insertions, 94 deletions
diff --git a/sys/dev/ixgbe/ixgbe_x550.c b/sys/dev/ixgbe/ixgbe_x550.c index 1199d38..ce2b0dc 100644 --- a/sys/dev/ixgbe/ixgbe_x550.c +++ b/sys/dev/ixgbe/ixgbe_x550.c @@ -81,9 +81,13 @@ s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw) mac->ops.mdd_event = ixgbe_mdd_event_X550; mac->ops.restore_mdd_vf = ixgbe_restore_mdd_vf_X550; mac->ops.disable_rx = ixgbe_disable_rx_x550; - if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) { + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_10G_T: hw->mac.ops.led_on = ixgbe_led_on_t_X550em; hw->mac.ops.led_off = ixgbe_led_off_t_X550em; + break; + default: + break; } return ret_val; } @@ -336,7 +340,6 @@ static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; ixgbe_setup_mux_ctl(hw); ixgbe_check_cs4227(hw); - return ixgbe_identify_module_generic(hw); break; case IXGBE_DEV_ID_X550EM_X_KX4: @@ -414,6 +417,8 @@ s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw) if (hw->mac.type == ixgbe_mac_X550EM_x) { mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550; mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550; + mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550em; + mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550em; } mac->ops.get_media_type = ixgbe_get_media_type_X550em; @@ -428,8 +433,6 @@ s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw) else mac->ops.setup_fc = ixgbe_setup_fc_X550em; - mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550em; - mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550em; if (hw->device_id != IXGBE_DEV_ID_X550EM_X_KR) mac->ops.setup_eee = NULL; @@ -632,7 +635,6 @@ s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee) u16 autoneg_eee_reg; u32 link_reg; s32 status; - u32 fuse; DEBUGFUNC("ixgbe_setup_eee_X550"); @@ -653,9 +655,10 @@ s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee) hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT, IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg); } else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) { - /* Not supported on first revision. */ - fuse = IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)); - if (!(fuse & IXGBE_FUSES0_REV1)) + /* Not supported on first revision of X550EM_x. */ + if ((hw->mac.type == ixgbe_mac_X550EM_x) && + !(IXGBE_FUSES0_REV_MASK & + IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))) return IXGBE_SUCCESS; status = ixgbe_read_iosf_sb_reg_x550(hw, @@ -965,7 +968,7 @@ void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf) num_qs = 4; /* 32 VFs / pools */ bitmask = 0x0000000F; break; - default: /* 64 VFs / pools */ + default: /* 64 VFs / pools */ num_qs = 2; bitmask = 0x00000003; break; @@ -1349,7 +1352,7 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) if (status != IXGBE_SUCCESS) return status; - /* Enables high temperature failure alarm */ + /* Enable high temperature failure and global fault alarms */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, ®); @@ -1357,7 +1360,8 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) if (status != IXGBE_SUCCESS) return status; - reg |= IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN; + reg |= (IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN | + IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN); status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, @@ -1452,7 +1456,6 @@ static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw, s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) { struct ixgbe_phy_info *phy = &hw->phy; - ixgbe_link_speed speed; s32 ret_val; DEBUGFUNC("ixgbe_init_phy_ops_X550em"); @@ -1467,10 +1470,6 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) * to determine internal PHY mode. */ phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); - if (phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) { - speed = IXGBE_LINK_SPEED_10GB_FULL | - IXGBE_LINK_SPEED_1GB_FULL; - } phy->ops.identify_sfp = ixgbe_identify_sfp_module_X550em; } @@ -1505,18 +1504,13 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) /* If internal link mode is XFI, then setup iXFI internal link, * else setup KR now. */ - if (!(phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { - phy->ops.setup_internal_link = + phy->ops.setup_internal_link = ixgbe_setup_internal_phy_t_x550em; - } else { - speed = IXGBE_LINK_SPEED_10GB_FULL | - IXGBE_LINK_SPEED_1GB_FULL; - ret_val = ixgbe_setup_kr_speed_x550em(hw, speed); - } - /* setup SW LPLU only for first revision */ - if (!(IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, - IXGBE_FUSES0_GROUP(0)))) + /* setup SW LPLU only for first revision of X550EM_x */ + if ((hw->mac.type == ixgbe_mac_X550EM_x) && + !(IXGBE_FUSES0_REV_MASK & + IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))) phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em; phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em; @@ -1555,11 +1549,15 @@ s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) /* flush pending Tx transactions */ ixgbe_clear_tx_pending(hw); - if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) { + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_10G_T: /* Config MDIO clock speed before the first MDIO PHY access */ hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); hlreg0 &= ~IXGBE_HLREG0_MDCSPD; IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); + break; + default: + break; } /* PHY ops must be identified and initialized prior to reset */ @@ -1639,6 +1637,13 @@ mac_reset_top: hw->mac.num_rar_entries = 128; hw->mac.ops.init_rx_addrs(hw); + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) { + /* Reconfig MDIO clock speed after PHY reset */ + hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); + hlreg0 &= ~IXGBE_HLREG0_MDCSPD; + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); + } + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) ixgbe_setup_mux_ctl(hw); @@ -1778,47 +1783,16 @@ s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw, } /** - * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. + * ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration * @hw: pointer to hardware structure - * @speed: the link speed to force * - * Configures the integrated KR PHY to use iXFI mode. Used to connect an - * internal and external PHY at a specific speed, without autonegotiation. + * iXfI configuration needed for ixgbe_mac_X550EM_x devices. **/ -static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) +static s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw) { s32 status; u32 reg_val; - /* Disable AN and force speed to 10G Serial. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); - if (status != IXGBE_SUCCESS) - return status; - - reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; - reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; - - /* Select forced link speed for internal PHY. */ - switch (*speed) { - case IXGBE_LINK_SPEED_10GB_FULL: - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; - break; - case IXGBE_LINK_SPEED_1GB_FULL: - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; - break; - default: - /* Other link speeds are not supported by internal KR PHY. */ - return IXGBE_ERR_LINK_SETUP; - } - - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - if (status != IXGBE_SUCCESS) - return status; - /* Disable training protocol FSM. */ status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), @@ -1873,9 +1847,58 @@ static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + return status; +} + +/** + * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. + * @hw: pointer to hardware structure + * @speed: the link speed to force + * + * Configures the integrated KR PHY to use iXFI mode. Used to connect an + * internal and external PHY at a specific speed, without autonegotiation. + **/ +static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) +{ + s32 status; + u32 reg_val; + + /* Disable AN and force speed to 10G Serial. */ + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); if (status != IXGBE_SUCCESS) return status; + reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + + /* Select forced link speed for internal PHY. */ + switch (*speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; + break; + default: + /* Other link speeds are not supported by internal KR PHY. */ + return IXGBE_ERR_LINK_SETUP; + } + + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status != IXGBE_SUCCESS) + return status; + + /* Additional configuration needed for x550em_x */ + if (hw->mac.type == ixgbe_mac_X550EM_x) { + status = ixgbe_setup_ixfi_x550em_x(hw); + if (status != IXGBE_SUCCESS) + return status; + } + /* Toggle port SW reset by AN reset. */ status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), @@ -1944,43 +1967,50 @@ s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw) if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) return IXGBE_ERR_CONFIG; - /* If link is not up, then there is no setup necessary so return */ - status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); - if (status != IXGBE_SUCCESS) - return status; + if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { + /* If link is down, there is no setup necessary so return */ + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); + if (status != IXGBE_SUCCESS) + return status; - if (!link_up) - return IXGBE_SUCCESS; + if (!link_up) + return IXGBE_SUCCESS; - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &speed); - if (status != IXGBE_SUCCESS) - return status; + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &speed); + if (status != IXGBE_SUCCESS) + return status; - /* If link is not still up, then no setup is necessary so return */ - status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); - if (status != IXGBE_SUCCESS) - return status; - if (!link_up) - return IXGBE_SUCCESS; + /* If link is still down - no setup is required so return */ + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); + if (status != IXGBE_SUCCESS) + return status; + if (!link_up) + return IXGBE_SUCCESS; - /* clear everything but the speed and duplex bits */ - speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK; + /* clear everything but the speed and duplex bits */ + speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK; - switch (speed) { - case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL: - force_speed = IXGBE_LINK_SPEED_10GB_FULL; - break; - case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL: - force_speed = IXGBE_LINK_SPEED_1GB_FULL; - break; - default: - /* Internal PHY does not support anything else */ - return IXGBE_ERR_INVALID_LINK_SETTINGS; - } + switch (speed) { + case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL: + force_speed = IXGBE_LINK_SPEED_10GB_FULL; + break; + case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL: + force_speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + default: + /* Internal PHY does not support anything else */ + return IXGBE_ERR_INVALID_LINK_SETTINGS; + } - return ixgbe_setup_ixfi_x550em(hw, &force_speed); + return ixgbe_setup_ixfi_x550em(hw, &force_speed); + } else { + speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + return ixgbe_setup_kr_speed_x550em(hw, speed); + } } /** @@ -2695,7 +2725,9 @@ s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) bool link_up; /* SW LPLU not required on later HW revisions. */ - if (IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0))) + if ((hw->mac.type == ixgbe_mac_X550EM_x) && + (IXGBE_FUSES0_REV_MASK & + IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))) return IXGBE_SUCCESS; /* If blocked by MNG FW, then don't restart AN */ @@ -2963,6 +2995,7 @@ void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) ixgbe_release_swfw_sync_X540(hw, mask); } + /** * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt * @hw: pointer to hardware structure @@ -3142,4 +3175,3 @@ s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx) return IXGBE_SUCCESS; } - |
