diff options
Diffstat (limited to 'sys/dev/ixgbe/ixgbe_api.c')
| -rw-r--r-- | sys/dev/ixgbe/ixgbe_api.c | 430 |
1 files changed, 424 insertions, 6 deletions
diff --git a/sys/dev/ixgbe/ixgbe_api.c b/sys/dev/ixgbe/ixgbe_api.c index 925866b..9784e3c 100644 --- a/sys/dev/ixgbe/ixgbe_api.c +++ b/sys/dev/ixgbe/ixgbe_api.c @@ -1,6 +1,6 @@ /****************************************************************************** - Copyright (c) 2001-2013, Intel Corporation + Copyright (c) 2001-2015, Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without @@ -35,6 +35,22 @@ #include "ixgbe_api.h" #include "ixgbe_common.h" +static const u32 ixgbe_mvals_base[IXGBE_MVALS_IDX_LIMIT] = { + IXGBE_MVALS_INIT() +}; + +static const u32 ixgbe_mvals_X540[IXGBE_MVALS_IDX_LIMIT] = { + IXGBE_MVALS_INIT(_X540) +}; + +static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = { + IXGBE_MVALS_INIT(_X550) +}; + +static const u32 ixgbe_mvals_X550EM_x[IXGBE_MVALS_IDX_LIMIT] = { + IXGBE_MVALS_INIT(_X550EM_x) +}; + /** * ixgbe_dcb_get_rtrup2tc - read rtrup2tc reg * @hw: pointer to hardware structure @@ -78,13 +94,21 @@ s32 ixgbe_init_shared_code(struct ixgbe_hw *hw) case ixgbe_mac_82599EB: status = ixgbe_init_ops_82599(hw); break; + case ixgbe_mac_X540: + status = ixgbe_init_ops_X540(hw); + break; + case ixgbe_mac_X550: + status = ixgbe_init_ops_X550(hw); + break; + case ixgbe_mac_X550EM_x: + status = ixgbe_init_ops_X550EM(hw); + break; case ixgbe_mac_82599_vf: case ixgbe_mac_X540_vf: + case ixgbe_mac_X550_vf: + case ixgbe_mac_X550EM_x_vf: status = ixgbe_init_ops_vf(hw); break; - case ixgbe_mac_X540: - status = ixgbe_init_ops_X540(hw); - break; default: status = IXGBE_ERR_DEVICE_NOT_SUPPORTED; break; @@ -112,6 +136,8 @@ s32 ixgbe_set_mac_type(struct ixgbe_hw *hw) return IXGBE_ERR_DEVICE_NOT_SUPPORTED; } + hw->mvals = ixgbe_mvals_base; + switch (hw->device_id) { case IXGBE_DEV_ID_82598: case IXGBE_DEV_ID_82598_BX: @@ -138,6 +164,7 @@ s32 ixgbe_set_mac_type(struct ixgbe_hw *hw) case IXGBE_DEV_ID_82599_SFP_EM: case IXGBE_DEV_ID_82599_SFP_SF2: case IXGBE_DEV_ID_82599_SFP_SF_QP: + case IXGBE_DEV_ID_82599_QSFP_SF_QP: case IXGBE_DEV_ID_82599EN_SFP: case IXGBE_DEV_ID_82599_CX4: case IXGBE_DEV_ID_82599_BYPASS: @@ -151,10 +178,35 @@ s32 ixgbe_set_mac_type(struct ixgbe_hw *hw) case IXGBE_DEV_ID_X540_VF: case IXGBE_DEV_ID_X540_VF_HV: hw->mac.type = ixgbe_mac_X540_vf; + hw->mvals = ixgbe_mvals_X540; break; case IXGBE_DEV_ID_X540T: + case IXGBE_DEV_ID_X540T1: case IXGBE_DEV_ID_X540_BYPASS: hw->mac.type = ixgbe_mac_X540; + hw->mvals = ixgbe_mvals_X540; + break; + case IXGBE_DEV_ID_X550T: + hw->mac.type = ixgbe_mac_X550; + hw->mvals = ixgbe_mvals_X550; + break; + case IXGBE_DEV_ID_X550EM_X_KX4: + case IXGBE_DEV_ID_X550EM_X_KR: + case IXGBE_DEV_ID_X550EM_X_10G_T: + case IXGBE_DEV_ID_X550EM_X_1G_T: + case IXGBE_DEV_ID_X550EM_X_SFP: + hw->mac.type = ixgbe_mac_X550EM_x; + hw->mvals = ixgbe_mvals_X550EM_x; + break; + case IXGBE_DEV_ID_X550_VF: + case IXGBE_DEV_ID_X550_VF_HV: + hw->mac.type = ixgbe_mac_X550_vf; + hw->mvals = ixgbe_mvals_X550; + break; + case IXGBE_DEV_ID_X550EM_X_VF: + case IXGBE_DEV_ID_X550EM_X_VF_HV: + hw->mac.type = ixgbe_mac_X550EM_x_vf; + hw->mvals = ixgbe_mvals_X550EM_x; break; default: ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED; @@ -512,6 +564,20 @@ s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw) } /** + * ixgbe_setup_internal_phy - Configure integrated PHY + * @hw: pointer to hardware structure + * + * Reconfigure the integrated PHY in order to enable talk to the external PHY. + * Returns success if not implemented, since nothing needs to be done in this + * case. + */ +s32 ixgbe_setup_internal_phy(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->phy.ops.setup_internal_link, (hw), + IXGBE_SUCCESS); +} + +/** * ixgbe_check_phy_link - Determine link and speed status * @hw: pointer to hardware structure * @@ -541,6 +607,17 @@ s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed, } /** + * ixgbe_set_phy_power - Control the phy power state + * @hw: pointer to hardware structure + * @on: TRUE for on, FALSE for off + */ +s32 ixgbe_set_phy_power(struct ixgbe_hw *hw, bool on) +{ + return ixgbe_call_func(hw, hw->phy.ops.set_phy_power, (hw, on), + IXGBE_NOT_IMPLEMENTED); +} + +/** * ixgbe_check_link - Get link and speed status * @hw: pointer to hardware structure * @@ -609,6 +686,22 @@ s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, } /** + * ixgbe_setup_mac_link - Set link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * + * Configures link settings. Restarts the link. + * Performs autonegotiation if needed. + **/ +s32 ixgbe_setup_mac_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg_wait_to_complete) +{ + return ixgbe_call_func(hw, hw->mac.ops.setup_mac_link, (hw, speed, + autoneg_wait_to_complete), + IXGBE_NOT_IMPLEMENTED); +} + +/** * ixgbe_get_link_capabilities - Returns link capabilities * @hw: pointer to hardware structure * @@ -1002,6 +1095,18 @@ s32 ixgbe_fc_enable(struct ixgbe_hw *hw) } /** + * ixgbe_setup_fc - Set up flow control + * @hw: pointer to hardware structure + * + * Called at init time to set up flow control. + **/ +s32 ixgbe_setup_fc(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.setup_fc, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** * ixgbe_set_fw_drv_ver - Try to send the driver version number FW * @hw: pointer to hardware structure * @maj: driver major number to be sent to firmware @@ -1018,6 +1123,194 @@ s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build, +/** + * ixgbe_dmac_config - Configure DMA Coalescing registers. + * @hw: pointer to hardware structure + * + * Configure DMA coalescing. If enabling dmac, dmac is activated. + * When disabling dmac, dmac enable dmac bit is cleared. + **/ +s32 ixgbe_dmac_config(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.dmac_config, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_dmac_update_tcs - Configure DMA Coalescing registers. + * @hw: pointer to hardware structure + * + * Disables dmac, updates per TC settings, and then enable dmac. + **/ +s32 ixgbe_dmac_update_tcs(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.dmac_update_tcs, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_dmac_config_tcs - Configure DMA Coalescing registers. + * @hw: pointer to hardware structure + * + * Configure DMA coalescing threshold per TC and set high priority bit for + * FCOE TC. The dmac enable bit must be cleared before configuring. + **/ +s32 ixgbe_dmac_config_tcs(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.dmac_config_tcs, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_setup_eee - Enable/disable EEE support + * @hw: pointer to the HW structure + * @enable_eee: boolean flag to enable EEE + * + * Enable/disable EEE based on enable_ee flag. + * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C + * are modified. + * + **/ +s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee) +{ + return ixgbe_call_func(hw, hw->mac.ops.setup_eee, (hw, enable_eee), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_set_source_address_pruning - Enable/Disable source address pruning + * @hw: pointer to hardware structure + * @enbale: enable or disable source address pruning + * @pool: Rx pool - Rx pool to toggle source address pruning + **/ +void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable, + unsigned int pool) +{ + if (hw->mac.ops.set_source_address_pruning) + hw->mac.ops.set_source_address_pruning(hw, enable, pool); +} + +/** + * ixgbe_set_ethertype_anti_spoofing - Enable/Disable Ethertype anti-spoofing + * @hw: pointer to hardware structure + * @enable: enable or disable switch for Ethertype anti-spoofing + * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing + * + **/ +void ixgbe_set_ethertype_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) +{ + if (hw->mac.ops.set_ethertype_anti_spoofing) + hw->mac.ops.set_ethertype_anti_spoofing(hw, enable, vf); +} + +/** + * ixgbe_read_iosf_sb_reg - Read 32 bit PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @device_type: type of device you want to communicate with + * @phy_data: Pointer to read data from PHY register + * + * Reads a value from a specified PHY register + **/ +s32 ixgbe_read_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u32 *phy_data) +{ + return ixgbe_call_func(hw, hw->mac.ops.read_iosf_sb_reg, (hw, reg_addr, + device_type, phy_data), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_write_iosf_sb_reg - Write 32 bit register through IOSF Sideband + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: type of device you want to communicate with + * @phy_data: Data to write to the PHY register + * + * Writes a value to specified PHY register + **/ +s32 ixgbe_write_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u32 phy_data) +{ + return ixgbe_call_func(hw, hw->mac.ops.write_iosf_sb_reg, (hw, reg_addr, + device_type, phy_data), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_disable_mdd - Disable malicious driver detection + * @hw: pointer to hardware structure + * + **/ +void ixgbe_disable_mdd(struct ixgbe_hw *hw) +{ + if (hw->mac.ops.disable_mdd) + hw->mac.ops.disable_mdd(hw); +} + +/** + * ixgbe_enable_mdd - Enable malicious driver detection + * @hw: pointer to hardware structure + * + **/ +void ixgbe_enable_mdd(struct ixgbe_hw *hw) +{ + if (hw->mac.ops.enable_mdd) + hw->mac.ops.enable_mdd(hw); +} + +/** + * ixgbe_mdd_event - Handle malicious driver detection event + * @hw: pointer to hardware structure + * @vf_bitmap: vf bitmap of malicious vfs + * + **/ +void ixgbe_mdd_event(struct ixgbe_hw *hw, u32 *vf_bitmap) +{ + if (hw->mac.ops.mdd_event) + hw->mac.ops.mdd_event(hw, vf_bitmap); +} + +/** + * ixgbe_restore_mdd_vf - Restore VF that was disabled during malicious driver + * detection event + * @hw: pointer to hardware structure + * @vf: vf index + * + **/ +void ixgbe_restore_mdd_vf(struct ixgbe_hw *hw, u32 vf) +{ + if (hw->mac.ops.restore_mdd_vf) + hw->mac.ops.restore_mdd_vf(hw, vf); +} + +/** + * ixgbe_enter_lplu - Transition to low power states + * @hw: pointer to hardware structure + * + * Configures Low Power Link Up on transition to low power states + * (from D0 to non-D0). + **/ +s32 ixgbe_enter_lplu(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->phy.ops.enter_lplu, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_handle_lasi - Handle external Base T PHY interrupt + * @hw: pointer to hardware structure + * + * Handle external Base T PHY interrupt. If high temperature + * failure alarm then return error, else if link status change + * then setup internal/external PHY link + * + * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature + * failure alarm, else return PHY access status. + */ +s32 ixgbe_handle_lasi(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->phy.ops.handle_lasi, (hw), + IXGBE_NOT_IMPLEMENTED); +} /** * ixgbe_read_analog_reg8 - Reads 8 bit analog register @@ -1064,6 +1357,7 @@ s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw) * ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address * @hw: pointer to hardware structure * @byte_offset: byte offset to read + * @dev_addr: I2C bus address to read from * @data: value read * * Performs byte read operation to SFP module's EEPROM over I2C interface. @@ -1076,9 +1370,59 @@ s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, } /** + * ixgbe_read_i2c_byte_unlocked - Reads 8 bit word via I2C from device address + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: I2C bus address to read from + * @data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_read_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte_unlocked, + (hw, byte_offset, dev_addr, data), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_read_i2c_combined - Perform I2C read combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to read from + * @reg: I2C device register to read from + * @val: pointer to location to receive read value + * + * Returns an error code on error. + */ +s32 ixgbe_read_i2c_combined(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val) +{ + return ixgbe_call_func(hw, hw->phy.ops.read_i2c_combined, (hw, addr, + reg, val), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_read_i2c_combined_unlocked - Perform I2C read combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to read from + * @reg: I2C device register to read from + * @val: pointer to location to receive read value + * + * Returns an error code on error. + **/ +s32 ixgbe_read_i2c_combined_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, + u16 *val) +{ + return ixgbe_call_func(hw, hw->phy.ops.read_i2c_combined_unlocked, + (hw, addr, reg, val), + IXGBE_NOT_IMPLEMENTED); +} + +/** * ixgbe_write_i2c_byte - Writes 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to write + * @dev_addr: I2C bus address to write to * @data: value to write * * Performs byte write operation to SFP module's EEPROM over I2C interface @@ -1092,6 +1436,55 @@ s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, } /** + * ixgbe_write_i2c_byte_unlocked - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: I2C bus address to write to + * @data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface + * at a specified device address. + **/ +s32 ixgbe_write_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte_unlocked, + (hw, byte_offset, dev_addr, data), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_write_i2c_combined - Perform I2C write combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to write to + * @reg: I2C device register to write to + * @val: value to write + * + * Returns an error code on error. + */ +s32 ixgbe_write_i2c_combined(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val) +{ + return ixgbe_call_func(hw, hw->phy.ops.write_i2c_combined, (hw, addr, + reg, val), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_write_i2c_combined_unlocked - Perform I2C write combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to write to + * @reg: I2C device register to write to + * @val: value to write + * + * Returns an error code on error. + **/ +s32 ixgbe_write_i2c_combined_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, + u16 val) +{ + return ixgbe_call_func(hw, hw->phy.ops.write_i2c_combined_unlocked, + (hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED); +} + +/** * ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface * @hw: pointer to hardware structure * @byte_offset: EEPROM byte offset to write @@ -1179,7 +1572,7 @@ s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw) * Acquires the SWFW semaphore through SW_FW_SYNC register for the specified * function (CSR, PHY0, PHY1, EEPROM, Flash) **/ -s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u16 mask) +s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u32 mask) { return ixgbe_call_func(hw, hw->mac.ops.acquire_swfw_sync, (hw, mask), IXGBE_NOT_IMPLEMENTED); @@ -1193,9 +1586,34 @@ s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u16 mask) * Releases the SWFW semaphore through SW_FW_SYNC register for the specified * function (CSR, PHY0, PHY1, EEPROM, Flash) **/ -void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u16 mask) +void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u32 mask) { if (hw->mac.ops.release_swfw_sync) hw->mac.ops.release_swfw_sync(hw, mask); } + +void ixgbe_disable_rx(struct ixgbe_hw *hw) +{ + if (hw->mac.ops.disable_rx) + hw->mac.ops.disable_rx(hw); +} + +void ixgbe_enable_rx(struct ixgbe_hw *hw) +{ + if (hw->mac.ops.enable_rx) + hw->mac.ops.enable_rx(hw); +} + +/** + * ixgbe_set_rate_select_speed - Set module link speed + * @hw: pointer to hardware structure + * @speed: link speed to set + * + * Set module link speed via the rate select. + */ +void ixgbe_set_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed) +{ + if (hw->mac.ops.set_rate_select_speed) + hw->mac.ops.set_rate_select_speed(hw, speed); +} |
