diff options
Diffstat (limited to 'sys/dev/isci/scil/sati_verify.c')
-rw-r--r-- | sys/dev/isci/scil/sati_verify.c | 273 |
1 files changed, 273 insertions, 0 deletions
diff --git a/sys/dev/isci/scil/sati_verify.c b/sys/dev/isci/scil/sati_verify.c new file mode 100644 index 0000000..350499d --- /dev/null +++ b/sys/dev/isci/scil/sati_verify.c @@ -0,0 +1,273 @@ +/*- + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +/** + * @file + * @brief This file contains the method implementations for translating + * the SCSI VERIFY (10, 12, 16-byte) commands. + */ + +#if !defined(DISABLE_SATI_VERIFY) + +#include <dev/isci/scil/sati_verify.h> +#include <dev/isci/scil/sati_callbacks.h> +#include <dev/isci/scil/sati_util.h> +#include <dev/isci/scil/sati_move.h> + +#include <dev/isci/scil/intel_ata.h> +#include <dev/isci/scil/intel_scsi.h> +#include <dev/isci/scil/intel_sat.h> + +//****************************************************************************** +//* P R I V A T E M E T H O D S +//****************************************************************************** + +/** + * @brief This method performs the SCSI VERIFY command translation + * functionality common to all VERIFY command sizes. + * This includes: + * - setting the command register + * - setting the device head register + * - filling in fields in the SATI_TRANSLATOR_SEQUENCE object. + * For more information on the parameters passed to this method, + * please reference sati_translate_command(). + * + * @return Indicate if the method was successfully completed. + * @retval SATI_SUCCESS This is returned in all other cases. + */ +static +SATI_STATUS sati_verify_translate_command( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + void * scsi_io, + void * ata_io +) +{ + U8 * cdb = sati_cb_get_cdb_address(scsi_io); + U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io); + + /** + * The translator doesn't support performing the byte check operation. + * As a result, error the request if the BYTCHK bit is set. + */ + if ((sati_get_cdb_byte(cdb, 1) & SCSI_VERIFY_BYTCHK_ENABLED)) + { + sati_scsi_sense_data_construct( + sequence, + scsi_io, + SCSI_STATUS_CHECK_CONDITION, + SCSI_SENSE_ILLEGAL_REQUEST, + SCSI_ASC_INVALID_FIELD_IN_CDB, + SCSI_ASCQ_INVALID_FIELD_IN_CDB + ); + return SATI_FAILURE_CHECK_RESPONSE_DATA; + } + + sequence->protocol = SAT_PROTOCOL_NON_DATA; + sequence->data_direction = SATI_DATA_DIRECTION_NONE; + + sati_set_ata_device_head(register_fis, ATA_DEV_HEAD_REG_LBA_MODE_ENABLE); + + // Ensure the device supports the 48 bit feature set. + if (sequence->device->capabilities & SATI_DEVICE_CAP_48BIT_ENABLE) + sati_set_ata_command(register_fis, ATA_READ_VERIFY_SECTORS_EXT); + else + sati_set_ata_command(register_fis, ATA_READ_VERIFY_SECTORS); + + return SATI_SUCCESS; +} + +//****************************************************************************** +//* P U B L I C M E T H O D S +//****************************************************************************** + +/** + * @brief This method performs all of the translation required for a + * SCSI VERIFY 10 byte CDB. + * This includes: + * - logical block address translation + * - transfer length (sector count) translation + * - translation items common to all VERIFY CDB sizes. + * For more information on the parameters passed to this method, + * please reference sati_translate_command(). + * + * @return Indicate if the command translation was successful. + * For more information on return values please reference + * sati_move_set_sector_count(), sati_verify_translate_command() + */ +SATI_STATUS sati_verify_10_translate_command( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + void * scsi_io, + void * ata_io +) +{ + SATI_STATUS status; + U8 * cdb = sati_cb_get_cdb_address(scsi_io); + U32 sector_count = (sati_get_cdb_byte(cdb, 7) << 8) | + (sati_get_cdb_byte(cdb, 8)); + + if(sati_device_state_stopped(sequence, scsi_io)) + { + return SATI_FAILURE_CHECK_RESPONSE_DATA; + } + else + { + sequence->type = SATI_SEQUENCE_VERIFY_10; + + // Fill in the Logical Block Address fields and sector count registers. + sati_move_translate_32_bit_lba(sequence, scsi_io, ata_io); + status = sati_move_set_sector_count(sequence,scsi_io,ata_io,sector_count,0); + if (status != SATI_SUCCESS) + return status; + + return sati_verify_translate_command(sequence, scsi_io, ata_io); + } +} + +/** + * @brief This method performs all of the translation required for a + * SCSI VERIFY 12 byte CDB. + * This includes: + * - logical block address translation + * - transfer length (sector count) translation + * - translation items common to all VERIFY CDB sizes. + * For more information on the parameters passed to this method, + * please reference sati_translate_command(). + * + * @return Indicate if the command translation was successful. + * For more information on return values please reference + * sati_move_set_sector_count(), sati_verify_translate_command() + */ +SATI_STATUS sati_verify_12_translate_command( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + void * scsi_io, + void * ata_io +) +{ + SATI_STATUS status; + U8 * cdb = sati_cb_get_cdb_address(scsi_io); + U32 sector_count = (sati_get_cdb_byte(cdb, 6) << 24) | + (sati_get_cdb_byte(cdb, 7) << 16) | + (sati_get_cdb_byte(cdb, 8) << 8) | + (sati_get_cdb_byte(cdb, 9)); + + if(sati_device_state_stopped(sequence, scsi_io)) + { + return SATI_FAILURE_CHECK_RESPONSE_DATA; + } + else + { + sequence->type = SATI_SEQUENCE_VERIFY_12; + + // Fill in the Logical Block Address fields and sector count registers. + sati_move_translate_32_bit_lba(sequence, scsi_io, ata_io); + status = sati_move_set_sector_count(sequence,scsi_io,ata_io,sector_count,0); + if (status != SATI_SUCCESS) + return status; + + return sati_verify_translate_command(sequence, scsi_io, ata_io); + } +} + +/** + * @brief This method performs all of the translation required for a + * SCSI VERIFY 16 byte CDB. + * This includes: + * - logical block address translation + * - transfer length (sector count) translation + * - translation items common to all VERIFY CDB sizes. + * For more information on the parameters passed to this method, + * please reference sati_translate_command(). + * + * @return Indicate if the command translation was successful. + * For more information on return values please reference + * sati_move_set_sector_count(), sati_verify_translate_command() + */ +SATI_STATUS sati_verify_16_translate_command( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + void * scsi_io, + void * ata_io +) +{ + SATI_STATUS status; + U8 * cdb = sati_cb_get_cdb_address(scsi_io); + U32 sector_count = (sati_get_cdb_byte(cdb, 10) << 24) | + (sati_get_cdb_byte(cdb, 11) << 16) | + (sati_get_cdb_byte(cdb, 12) << 8) | + (sati_get_cdb_byte(cdb, 13)); + + if(sati_device_state_stopped(sequence, scsi_io)) + { + return SATI_FAILURE_CHECK_RESPONSE_DATA; + } + else + { + sequence->type = SATI_SEQUENCE_VERIFY_16; + + // Fill in the Logical Block Address field. + status = sati_move_translate_64_bit_lba(sequence, scsi_io, ata_io); + if (status != SATI_SUCCESS) + return status; + + // Fill in the Sector Count fields. + status = sati_move_set_sector_count(sequence,scsi_io,ata_io,sector_count,0); + if (status != SATI_SUCCESS) + return status; + + return sati_verify_translate_command(sequence, scsi_io, ata_io); + } +} + +#endif // !defined(DISABLE_SATI_VERIFY) + |