diff options
Diffstat (limited to 'sys/dev/isci/scil/sati_mode_sense_10.c')
-rw-r--r-- | sys/dev/isci/scil/sati_mode_sense_10.c | 509 |
1 files changed, 509 insertions, 0 deletions
diff --git a/sys/dev/isci/scil/sati_mode_sense_10.c b/sys/dev/isci/scil/sati_mode_sense_10.c new file mode 100644 index 0000000..3e8a84f --- /dev/null +++ b/sys/dev/isci/scil/sati_mode_sense_10.c @@ -0,0 +1,509 @@ +/*- + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +/** + * @file + * @brief This file contains the method implementations required to + * translate the SCSI mode sense 10-byte commands. + */ + +#if !defined(DISABLE_SATI_MODE_SENSE) + +#include <dev/isci/scil/sati_mode_sense.h> +#include <dev/isci/scil/sati_mode_sense_10.h> +#include <dev/isci/scil/sati_mode_pages.h> +#include <dev/isci/scil/sati_callbacks.h> +#include <dev/isci/scil/sati_util.h> +#include <dev/isci/scil/intel_scsi.h> +#include <dev/isci/scil/intel_ata.h> + +//****************************************************************************** +//* P R I V A T E M E T H O D S +//****************************************************************************** + +/** + * @brief This method builds the mode parameter header for a 10-byte SCSI + * mode sense data response. The parameter header is 4 bytes in + * size. + * For more information on the parameters passed to this method, + * please reference sati_translate_command(). + * + * @param[in] identify This parameter specifies the ATA remote device's + * received IDENTIFY DEVICE data. + * @param[in] mode_data_length This parameter specifies the amount of data + * to be returned as part of this mode sense request. + * + * @return This method returns the number of bytes written into the + * mode sense data buffer. + */ +static +U32 sati_mode_sense_10_build_header( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + void * scsi_io, + ATA_IDENTIFY_DEVICE_DATA_T * identify, + U16 mode_data_length +) +{ + U8 * cdb = sati_cb_get_cdb_address(scsi_io); + + // Fill in the length of the mode parameter data returned (do not include + // the size of the mode data length field in the total). Adjust the + // mode data length to not include the mode data length fields itself + // (i.e. subtract 2). + mode_data_length -= 2; + sati_set_data_byte(sequence, scsi_io, 0, (U8)(mode_data_length >> 8) & 0xFF); + sati_set_data_byte(sequence, scsi_io, 1, (U8)(mode_data_length & 0xFF)); + + // Medium Type is 0 for SBC devices + sati_set_data_byte(sequence, scsi_io, 2, SCSI_MODE_HEADER_MEDIUM_TYPE_SBC); + + // Write Protect (WP), Rsvd, DPOFUA, Rsvd + if (sequence->device->capabilities & SATI_DEVICE_CAP_DMA_FUA_ENABLE) + sati_set_data_byte(sequence,scsi_io,3,SCSI_MODE_SENSE_HEADER_FUA_ENABLE); + else + sati_set_data_byte(sequence, scsi_io, 3, 0); + + // Set the reserved bytes to 0. The LONGLBA field in byte 4 is overridden + // later in this method if LLBAA is enabled. + sati_set_data_byte(sequence, scsi_io, 4, 0); + sati_set_data_byte(sequence, scsi_io, 5, 0); + + // The MSB for the block descriptor length is never used since the + // largest block descriptor in this translator is 16-bytes in size. + sati_set_data_byte(sequence, scsi_io, 6, 0); + + // Set the LSB block descriptor length if block descriptors are utilized. + if (sati_get_cdb_byte(cdb, 1) & SCSI_MODE_SENSE_DBD_ENABLE) + sati_set_data_byte(sequence, scsi_io, 7, 0); + else + { + // If Long Logical Block Address are allowed, then the block descriptor + // is larger (16 bytes total). + if (sati_get_cdb_byte(cdb, 1) & SCSI_MODE_SENSE_LLBAA_ENABLE) + { + sati_set_data_byte(sequence, scsi_io, 4, 1); + sati_set_data_byte( + sequence, scsi_io, 7, SCSI_MODE_SENSE_LLBA_BLOCK_DESCRIPTOR_LENGTH + ); + } + else + { + sati_set_data_byte( + sequence, scsi_io, 7, SCSI_MODE_SENSE_STD_BLOCK_DESCRIPTOR_LENGTH + ); + } + } + + return SCSI_MODE_SENSE_10_HEADER_LENGTH; +} + +static +U32 sati_mode_sense_10_build_llba_block_descriptor( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + void * scsi_io, + ATA_IDENTIFY_DEVICE_DATA_T * identify, + U32 offset +) +{ + U32 lba_low = 0; + U32 lba_high = 0; + U32 sector_size = 0; + + // Extract the sector information (sector size, logical blocks) from + // the retrieved ATA identify device data. + sati_ata_identify_device_get_sector_info( + identify, &lba_low, &lba_high, §or_size + ); + + // Fill in the 8-byte logical block area + sati_set_data_byte(sequence, scsi_io, offset, (U8)((lba_high>>24) & 0xFF)); + sati_set_data_byte(sequence, scsi_io, offset+1, (U8)((lba_high>>16) & 0xFF)); + sati_set_data_byte(sequence, scsi_io, offset+2, (U8)((lba_high>>8) & 0xFF)); + sati_set_data_byte(sequence, scsi_io, offset+3, (U8)(lba_high & 0xFF)); + sati_set_data_byte(sequence, scsi_io, offset+4, (U8)((lba_low>>24) & 0xFF)); + sati_set_data_byte(sequence, scsi_io, offset+5, (U8)((lba_low>>16) & 0xFF)); + sati_set_data_byte(sequence, scsi_io, offset+6, (U8)((lba_low>>8) & 0xFF)); + sati_set_data_byte(sequence, scsi_io, offset+7, (U8)(lba_low & 0xFF)); + + // Clear the reserved fields. + sati_set_data_byte(sequence, scsi_io, offset+8, 0); + sati_set_data_byte(sequence, scsi_io, offset+9, 0); + sati_set_data_byte(sequence, scsi_io, offset+10, 0); + sati_set_data_byte(sequence, scsi_io, offset+11, 0); + + // Fill in the four byte Block Length field + sati_set_data_byte(sequence,scsi_io, offset+12, (U8)((sector_size>>24) & 0xFF)); + sati_set_data_byte(sequence,scsi_io, offset+13, (U8)((sector_size>>16) & 0xFF)); + sati_set_data_byte(sequence,scsi_io, offset+14, (U8)((sector_size>>8) & 0xFF)); + sati_set_data_byte(sequence,scsi_io, offset+15, (U8)(sector_size & 0xFF)); + + return SCSI_MODE_SENSE_LLBA_BLOCK_DESCRIPTOR_LENGTH; +} + +/** + * @brief This method perform the data translation common to all SCSI MODE + * SENSE 10 byte commands. This includes building the mode page + * header and block descriptor (if requested). + * For more information on the parameters passed to this method, + * please reference sati_translate_command(). + * + * @param[in] identify This parameter specifies the remote device's IDENTIFY + * DEVICE data to be used during translation. + * @param[in] transfer_length This parameter specifies the size of the + * mode page (including header & block descriptor). + * + * @return This method returns the number of bytes written into the user's + * mode page data buffer. + */ +static +U32 sati_mode_sense_10_translate_data( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + ATA_IDENTIFY_DEVICE_DATA_T * identify, + void * scsi_io, + U16 transfer_length +) +{ + U8 * cdb = sati_cb_get_cdb_address(scsi_io); + U32 offset; + + offset = sati_mode_sense_10_build_header( + sequence, scsi_io, identify, transfer_length + ); + + // Determine if the caller disabled block descriptors (DBD). If not, + // then generate a block descriptor. + if ((sati_get_cdb_byte(cdb, 1) & SCSI_MODE_SENSE_DBD_ENABLE) == 0) + { + // If the user requested the Long LBA format descriptor, then build + // it + if (sati_get_cdb_byte(cdb, 1) & SCSI_MODE_SENSE_LLBAA_ENABLE) + offset += sati_mode_sense_10_build_llba_block_descriptor( + sequence, scsi_io, identify, offset + ); + else + offset += sati_mode_sense_build_std_block_descriptor( + sequence, scsi_io, identify, offset + ); + } + + return offset; +} + +//****************************************************************************** +//* P R O T E C T E D M E T H O D S +//****************************************************************************** + +/** + * @brief This method will translate the SCSI mode sense 6 byte command + * into corresponding ATA commands. If the command is well-formed, + * then the translation will result in an ATA IDENTIFY DEVICE + * command. + * For more information on the parameters passed to this method, + * please reference sati_translate_command(). + * + * @return Indicate if the command translation succeeded. + * @retval SCI_SUCCESS This is returned if the command translation was + * successful. + * @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if + * sense data has been created as a result of something specified + * in the CDB. + */ +SATI_STATUS sati_mode_sense_10_translate_command( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + void * scsi_io, + void * ata_io +) +{ + U8 * cdb = sati_cb_get_cdb_address(scsi_io); + + sequence->command_specific_data.scratch = 0; + + // Set the data length based on the allocation length field in the CDB. + sequence->allocation_length = (sati_get_cdb_byte(cdb, 7) << 8) | + (sati_get_cdb_byte(cdb, 8)); + + return sati_mode_sense_translate_command(sequence, scsi_io, ata_io, 10); +} + +/** + * @brief This method will perform data translation from the supplied ATA + * input data (i.e. an ATA IDENTIFY DEVICE block) into a CACHING + * mode page format. The data will be written into the user's mode + * page data buffer. This function operates specifically for MODE + * SENSE 10 commands. + * For more information on the parameters passed to this method, + * please reference sati_translate_data(). + * + * @return none. + */ +void sati_mode_sense_10_caching_translate_data( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + void * ata_input_data, + void * scsi_io +) +{ + ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) + ata_input_data; + U16 data_length = sati_mode_sense_calculate_page_header(scsi_io, 10) + + SCSI_MODE_PAGE_08_LENGTH; + U32 page_offset = sati_mode_sense_10_translate_data( + sequence, identify, scsi_io, data_length + ); + + sati_mode_sense_caching_translate_data( + sequence, scsi_io, identify, page_offset + ); +} + +/** + * @brief This method will perform data translation from the supplied ATA + * input data (i.e. an ATA IDENTIFY DEVICE block) into a INFORMATIONAL + * EXCEPTIONS CONTROL mode page format. The data will be written + * into the user's mode page data buffer. This function operates + * specifically for MODE SENSE 10 commands. + * For more information on the parameters passed to this method, + * please reference sati_translate_data(). + * + * @return none. + */ +void sati_mode_sense_10_informational_excp_control_translate_data( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + void * ata_input_data, + void * scsi_io +) +{ + ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) + ata_input_data; + U16 data_length = sati_mode_sense_calculate_page_header(scsi_io, 10) + + SCSI_MODE_PAGE_1C_LENGTH; + U32 page_offset = sati_mode_sense_10_translate_data( + sequence, identify, scsi_io, data_length + ); + + sati_mode_sense_informational_excp_control_translate_data( + sequence, scsi_io, identify, page_offset + ); +} + +/** +* @brief This method will perform data translation from the supplied ATA +* input data (i.e. an ATA IDENTIFY DEVICE block) into a Read Write Error +* mode page format. The data will be written +* into the user's mode page data buffer. This function operates +* specifically for MODE SENSE 10 commands. +* For more information on the parameters passed to this method, +* please reference sati_translate_data(). +* +* @return none. +*/ +void sati_mode_sense_10_read_write_error_translate_data( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + void * ata_input_data, + void * scsi_io +) +{ + ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) + ata_input_data; + + U16 data_length = sati_mode_sense_calculate_page_header(scsi_io, 10) + + SCSI_MODE_PAGE_01_LENGTH; + + U32 page_offset = sati_mode_sense_10_translate_data( + sequence, identify, scsi_io, data_length + ); + + sati_mode_sense_read_write_error_translate_data( + sequence, scsi_io, identify, page_offset + ); +} + +/** +* @brief This method will perform data translation from the supplied ATA +* input data (i.e. an ATA IDENTIFY DEVICE block) into a Disconnect +* Reconnect mode page format. The data will be written +* into the user's mode page data buffer. This function operates +* specifically for MODE SENSE 10 commands. +* For more information on the parameters passed to this method, +* please reference sati_translate_data(). +* +* @return none. +*/ +void sati_mode_sense_10_disconnect_reconnect_translate_data( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + void * ata_input_data, + void * scsi_io +) +{ + ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) + ata_input_data; + + U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 10) + + SCSI_MODE_PAGE_02_LENGTH; + + U32 page_offset = sati_mode_sense_10_translate_data( + sequence, identify, scsi_io, data_length + ); + + sati_mode_sense_disconnect_reconnect_translate_data( + sequence, scsi_io, identify, page_offset + ); +} + +/** +* @brief This method will perform data translation from the supplied ATA +* input data (i.e. an ATA IDENTIFY DEVICE block) into a Control +* mode page format. The data will be written +* into the user's mode page data buffer. This function operates +* specifically for MODE SENSE 10 commands. +* For more information on the parameters passed to this method, +* please reference sati_translate_data(). +* +* @return none. +*/ +void sati_mode_sense_10_control_translate_data( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + void * ata_input_data, + void * scsi_io +) +{ + ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) + ata_input_data; + + U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 10) + + SCSI_MODE_PAGE_0A_LENGTH; + + U32 page_offset = sati_mode_sense_10_translate_data( + sequence, identify, scsi_io, data_length + ); + + sati_mode_sense_control_translate_data( + sequence, scsi_io, identify, page_offset + ); +} + +/** +* @brief This method will perform data translation from the supplied ATA +* input data (i.e. an ATA IDENTIFY DEVICE block) into a Power +* Condition mode page format. The data will be written +* into the user's mode page data buffer. This function operates +* specifically for MODE SENSE 10 commands. +* For more information on the parameters passed to this method, +* please reference sati_translate_data(). +* +* @return none. +*/ +void sati_mode_sense_10_power_condition_translate_data( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + void * ata_input_data, + void * scsi_io +) +{ + ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) + ata_input_data; + + U8 data_length; + U32 page_offset; + + data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 10) + + SCSI_MODE_PAGE_1A_LENGTH; + + page_offset = sati_mode_sense_10_translate_data( + sequence, identify, scsi_io, data_length + ); + + sati_mode_sense_power_condition_translate_data( + sequence, scsi_io, identify, page_offset + ); +} + + +/** + * @brief This method will perform data translation from the supplied ATA + * input data (i.e. an ATA IDENTIFY DEVICE block) into an ALL + * PAGES mode page format. The ALL PAGES mode page is basically a + * conglomeration of all mode pages and sub-pages into a single + * page. The data will be written into the user's mode page + * data buffer. This function operates specifically for MODE + * SENSE 10 commands. + * For more information on the parameters passed to this method, + * please reference sati_translate_data(). + * + * @return none. + */ +void sati_mode_sense_10_all_pages_translate_data( + SATI_TRANSLATOR_SEQUENCE_T * sequence, + void * ata_input_data, + void * scsi_io +) +{ + ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) + ata_input_data; + U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 10) + + SCSI_MODE_PAGE_01_LENGTH + + SCSI_MODE_PAGE_02_LENGTH + + SCSI_MODE_PAGE_08_LENGTH + + SCSI_MODE_PAGE_0A_LENGTH + + SCSI_MODE_PAGE_1C_LENGTH; + U32 page_offset = sati_mode_sense_10_translate_data( + sequence, identify, scsi_io, data_length + ); + + sati_mode_sense_all_pages_translate_data( + sequence, scsi_io, identify, page_offset + ); +} + +#endif // !defined(DISABLE_SATI_MODE_SENSE) + |