diff options
Diffstat (limited to 'sys/dev/fxp')
-rw-r--r-- | sys/dev/fxp/if_fxp.c | 30 |
1 files changed, 4 insertions, 26 deletions
diff --git a/sys/dev/fxp/if_fxp.c b/sys/dev/fxp/if_fxp.c index 65de7e1..77fb09d 100644 --- a/sys/dev/fxp/if_fxp.c +++ b/sys/dev/fxp/if_fxp.c @@ -370,7 +370,7 @@ fxp_attach(device_t dev) u_int32_t val; u_int16_t data, myea[ETHER_ADDR_LEN / 2]; int i, rid, m1, m2, prefer_iomap, maxtxseg; - int s, ipcbxmit_disable; + int s; sc->dev = dev; callout_init(&sc->stat_ch, CALLOUT_MPSAFE); @@ -572,31 +572,9 @@ fxp_attach(device_t dev) * and later chips. Note: we need extended TXCB support * too, but that's already enabled by the code above. * Be careful to do this only on the right devices. - * - * At least some 82550 cards probed as "chip=0x12298086 rev=0x0d" - * truncate packets that end with an mbuf containing 1 to 3 bytes - * when used with this feature enabled in the previous version of the - * driver. This problem appears to be fixed now that the driver - * always sets the hardware parse bit in the IPCB structure, which - * the "Intel 8255x 10/100 Mbps Ethernet Controller Family Open - * Source Software Developer Manual" says is necessary in the - * cases where packet truncation was observed. - * - * The device hint "hint.fxp.UNIT_NUMBER.ipcbxmit_disable" - * allows this feature to be disabled at boot time. - * - * If fxp is not compiled into the kernel, this feature may also - * be disabled at run time: - * # kldunload fxp - * # kenv hint.fxp.0.ipcbxmit_disable=1 - * # kldload fxp - */ - - if (resource_int_value("fxp", device_get_unit(dev), "ipcbxmit_disable", - &ipcbxmit_disable) != 0) - ipcbxmit_disable = 0; - if (ipcbxmit_disable == 0 && (sc->revision == FXP_REV_82550 || - sc->revision == FXP_REV_82550_C)) { + */ + + if (sc->revision == FXP_REV_82550 || sc->revision == FXP_REV_82550_C) { sc->rfa_size = sizeof (struct fxp_rfa); sc->tx_cmd = FXP_CB_COMMAND_IPCBXMIT; sc->flags |= FXP_FLAG_EXT_RFA; |