diff options
Diffstat (limited to 'sys/dev/ath/if_ath.c')
| -rw-r--r-- | sys/dev/ath/if_ath.c | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/sys/dev/ath/if_ath.c b/sys/dev/ath/if_ath.c index 6c7b0e7..35592d9 100644 --- a/sys/dev/ath/if_ath.c +++ b/sys/dev/ath/if_ath.c @@ -528,6 +528,9 @@ ath_attach(u_int16_t devid, struct ath_softc *sc) | IEEE80211_C_WPA /* capable of WPA1+WPA2 */ | IEEE80211_C_BGSCAN /* capable of bg scanning */ | IEEE80211_C_TXFRAG /* handle tx frags */ +#ifdef ATH_ENABLE_DFS + | IEEE80211_C_DFS /* Enable DFS radar detection */ +#endif ; /* * Query the hal to figure out h/w crypto support. @@ -738,6 +741,7 @@ ath_attach(u_int16_t devid, struct ath_softc *sc) */ ath_sysctlattach(sc); ath_sysctl_stats_attach(sc); + ath_sysctl_hal_attach(sc); if (bootverbose) ieee80211_announce(ic); @@ -1286,6 +1290,8 @@ ath_resume(struct ath_softc *sc) HAL_GPIO_MUX_MAC_NETWORK_LED); ath_hal_gpioset(ah, sc->sc_ledpin, !sc->sc_ledon); } + + /* XXX beacons ? */ } void @@ -1588,6 +1594,12 @@ ath_init(void *arg) sc->sc_lastani = 0; sc->sc_lastshortcal = 0; sc->sc_doresetcal = AH_FALSE; + /* + * Beacon timers were cleared here; give ath_newstate() + * a hint that the beacon timers should be poked when + * things transition to the RUN state. + */ + sc->sc_beacons = 0; /* * Setup the hardware after reset: the key cache @@ -4464,6 +4476,19 @@ ath_chan_set(struct ath_softc *sc, struct ieee80211_channel *chan) ath_chan_change(sc, chan); /* + * Reset clears the beacon timers; reset them + * here if needed. + */ + if (sc->sc_beacons) { /* restart beacons */ +#ifdef IEEE80211_SUPPORT_TDMA + if (sc->sc_tdma) + ath_tdma_config(sc, NULL); + else +#endif + ath_beacon_config(sc, NULL); + } + + /* * Re-enable interrupts. */ ath_hal_intrset(ah, sc->sc_imask); @@ -4668,6 +4693,7 @@ ath_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) struct ieee80211_node *ni = NULL; int i, error, stamode; u_int32_t rfilt; + int csa_run_transition = 0; static const HAL_LED_STATE leds[] = { HAL_LED_INIT, /* IEEE80211_S_INIT */ HAL_LED_SCAN, /* IEEE80211_S_SCAN */ @@ -4683,6 +4709,9 @@ ath_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) ieee80211_state_name[vap->iv_state], ieee80211_state_name[nstate]); + if (vap->iv_state == IEEE80211_S_CSA && nstate == IEEE80211_S_RUN) + csa_run_transition = 1; + callout_drain(&sc->sc_cal_ch); ath_hal_setledstate(ah, leds[nstate]); /* set LED */ @@ -4789,8 +4818,14 @@ ath_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) * Defer beacon timer configuration to the next * beacon frame so we have a current TSF to use * (any TSF collected when scanning is likely old). + * However if it's due to a CSA -> RUN transition, + * force a beacon update so we pick up a lack of + * beacons from an AP in CAC and thus force a + * scan. */ sc->sc_syncbeacon = 1; + if (csa_run_transition) + ath_beacon_config(sc, vap); break; case IEEE80211_M_MONITOR: /* |
