diff options
Diffstat (limited to 'sys/dev/asr/i2obscsi.h')
| -rw-r--r-- | sys/dev/asr/i2obscsi.h | 278 |
1 files changed, 139 insertions, 139 deletions
diff --git a/sys/dev/asr/i2obscsi.h b/sys/dev/asr/i2obscsi.h index 7e25ffa..06ee30c 100644 --- a/sys/dev/asr/i2obscsi.h +++ b/sys/dev/asr/i2obscsi.h @@ -81,7 +81,7 @@ ****************************************************************/ #if !defined(I2O_BASE_SCSI_HDR) -#define I2O_BASE_SCSI_HDR +#define I2O_BASE_SCSI_HDR #if ((defined(KERNEL) || defined(_KERNEL)) && defined(__FreeBSD__)) # if (KERN_VERSION < 3) @@ -94,7 +94,7 @@ #endif -#define I2OBSCSI_REV 1_5_1 /* Header file revision string */ +#define I2OBSCSI_REV 1_5_1 /* Header file revision string */ @@ -184,61 +184,61 @@ PRAGMA_PACK_PUSH /* SCSI Device Completion Status Codes (defined by SCSI-2/3)*/ -#define I2O_SCSI_DEVICE_DSC_MASK 0x00FF +#define I2O_SCSI_DEVICE_DSC_MASK 0x00FF -#define I2O_SCSI_DSC_SUCCESS 0x0000 -#define I2O_SCSI_DSC_CHECK_CONDITION 0x0002 -#define I2O_SCSI_DSC_BUSY 0x0008 -#define I2O_SCSI_DSC_RESERVATION_CONFLICT 0x0018 -#define I2O_SCSI_DSC_COMMAND_TERMINATED 0x0022 -#define I2O_SCSI_DSC_TASK_SET_FULL 0x0028 -#define I2O_SCSI_DSC_ACA_ACTIVE 0x0030 +#define I2O_SCSI_DSC_SUCCESS 0x0000 +#define I2O_SCSI_DSC_CHECK_CONDITION 0x0002 +#define I2O_SCSI_DSC_BUSY 0x0008 +#define I2O_SCSI_DSC_RESERVATION_CONFLICT 0x0018 +#define I2O_SCSI_DSC_COMMAND_TERMINATED 0x0022 +#define I2O_SCSI_DSC_TASK_SET_FULL 0x0028 +#define I2O_SCSI_DSC_ACA_ACTIVE 0x0030 /* SCSI Adapter Status Codes (based on CAM-1) */ -#define I2O_SCSI_HBA_DSC_MASK 0xFF00 - -#define I2O_SCSI_HBA_DSC_SUCCESS 0x0000 - -#define I2O_SCSI_HBA_DSC_REQUEST_ABORTED 0x0200 -#define I2O_SCSI_HBA_DSC_UNABLE_TO_ABORT 0x0300 -#define I2O_SCSI_HBA_DSC_COMPLETE_WITH_ERROR 0x0400 -#define I2O_SCSI_HBA_DSC_ADAPTER_BUSY 0x0500 -#define I2O_SCSI_HBA_DSC_REQUEST_INVALID 0x0600 -#define I2O_SCSI_HBA_DSC_PATH_INVALID 0x0700 -#define I2O_SCSI_HBA_DSC_DEVICE_NOT_PRESENT 0x0800 -#define I2O_SCSI_HBA_DSC_UNABLE_TO_TERMINATE 0x0900 -#define I2O_SCSI_HBA_DSC_SELECTION_TIMEOUT 0x0A00 -#define I2O_SCSI_HBA_DSC_COMMAND_TIMEOUT 0x0B00 - -#define I2O_SCSI_HBA_DSC_MR_MESSAGE_RECEIVED 0x0D00 -#define I2O_SCSI_HBA_DSC_SCSI_BUS_RESET 0x0E00 -#define I2O_SCSI_HBA_DSC_PARITY_ERROR_FAILURE 0x0F00 -#define I2O_SCSI_HBA_DSC_AUTOSENSE_FAILED 0x1000 -#define I2O_SCSI_HBA_DSC_NO_ADAPTER 0x1100 -#define I2O_SCSI_HBA_DSC_DATA_OVERRUN 0x1200 -#define I2O_SCSI_HBA_DSC_UNEXPECTED_BUS_FREE 0x1300 -#define I2O_SCSI_HBA_DSC_SEQUENCE_FAILURE 0x1400 -#define I2O_SCSI_HBA_DSC_REQUEST_LENGTH_ERROR 0x1500 -#define I2O_SCSI_HBA_DSC_PROVIDE_FAILURE 0x1600 -#define I2O_SCSI_HBA_DSC_BDR_MESSAGE_SENT 0x1700 -#define I2O_SCSI_HBA_DSC_REQUEST_TERMINATED 0x1800 - -#define I2O_SCSI_HBA_DSC_IDE_MESSAGE_SENT 0x3300 -#define I2O_SCSI_HBA_DSC_RESOURCE_UNAVAILABLE 0x3400 -#define I2O_SCSI_HBA_DSC_UNACKNOWLEDGED_EVENT 0x3500 -#define I2O_SCSI_HBA_DSC_MESSAGE_RECEIVED 0x3600 -#define I2O_SCSI_HBA_DSC_INVALID_CDB 0x3700 -#define I2O_SCSI_HBA_DSC_LUN_INVALID 0x3800 -#define I2O_SCSI_HBA_DSC_SCSI_TID_INVALID 0x3900 -#define I2O_SCSI_HBA_DSC_FUNCTION_UNAVAILABLE 0x3A00 -#define I2O_SCSI_HBA_DSC_NO_NEXUS 0x3B00 -#define I2O_SCSI_HBA_DSC_SCSI_IID_INVALID 0x3C00 -#define I2O_SCSI_HBA_DSC_CDB_RECEIVED 0x3D00 -#define I2O_SCSI_HBA_DSC_LUN_ALREADY_ENABLED 0x3E00 -#define I2O_SCSI_HBA_DSC_BUS_BUSY 0x3F00 - -#define I2O_SCSI_HBA_DSC_QUEUE_FROZEN 0x4000 +#define I2O_SCSI_HBA_DSC_MASK 0xFF00 + +#define I2O_SCSI_HBA_DSC_SUCCESS 0x0000 + +#define I2O_SCSI_HBA_DSC_REQUEST_ABORTED 0x0200 +#define I2O_SCSI_HBA_DSC_UNABLE_TO_ABORT 0x0300 +#define I2O_SCSI_HBA_DSC_COMPLETE_WITH_ERROR 0x0400 +#define I2O_SCSI_HBA_DSC_ADAPTER_BUSY 0x0500 +#define I2O_SCSI_HBA_DSC_REQUEST_INVALID 0x0600 +#define I2O_SCSI_HBA_DSC_PATH_INVALID 0x0700 +#define I2O_SCSI_HBA_DSC_DEVICE_NOT_PRESENT 0x0800 +#define I2O_SCSI_HBA_DSC_UNABLE_TO_TERMINATE 0x0900 +#define I2O_SCSI_HBA_DSC_SELECTION_TIMEOUT 0x0A00 +#define I2O_SCSI_HBA_DSC_COMMAND_TIMEOUT 0x0B00 + +#define I2O_SCSI_HBA_DSC_MR_MESSAGE_RECEIVED 0x0D00 +#define I2O_SCSI_HBA_DSC_SCSI_BUS_RESET 0x0E00 +#define I2O_SCSI_HBA_DSC_PARITY_ERROR_FAILURE 0x0F00 +#define I2O_SCSI_HBA_DSC_AUTOSENSE_FAILED 0x1000 +#define I2O_SCSI_HBA_DSC_NO_ADAPTER 0x1100 +#define I2O_SCSI_HBA_DSC_DATA_OVERRUN 0x1200 +#define I2O_SCSI_HBA_DSC_UNEXPECTED_BUS_FREE 0x1300 +#define I2O_SCSI_HBA_DSC_SEQUENCE_FAILURE 0x1400 +#define I2O_SCSI_HBA_DSC_REQUEST_LENGTH_ERROR 0x1500 +#define I2O_SCSI_HBA_DSC_PROVIDE_FAILURE 0x1600 +#define I2O_SCSI_HBA_DSC_BDR_MESSAGE_SENT 0x1700 +#define I2O_SCSI_HBA_DSC_REQUEST_TERMINATED 0x1800 + +#define I2O_SCSI_HBA_DSC_IDE_MESSAGE_SENT 0x3300 +#define I2O_SCSI_HBA_DSC_RESOURCE_UNAVAILABLE 0x3400 +#define I2O_SCSI_HBA_DSC_UNACKNOWLEDGED_EVENT 0x3500 +#define I2O_SCSI_HBA_DSC_MESSAGE_RECEIVED 0x3600 +#define I2O_SCSI_HBA_DSC_INVALID_CDB 0x3700 +#define I2O_SCSI_HBA_DSC_LUN_INVALID 0x3800 +#define I2O_SCSI_HBA_DSC_SCSI_TID_INVALID 0x3900 +#define I2O_SCSI_HBA_DSC_FUNCTION_UNAVAILABLE 0x3A00 +#define I2O_SCSI_HBA_DSC_NO_NEXUS 0x3B00 +#define I2O_SCSI_HBA_DSC_SCSI_IID_INVALID 0x3C00 +#define I2O_SCSI_HBA_DSC_CDB_RECEIVED 0x3D00 +#define I2O_SCSI_HBA_DSC_LUN_ALREADY_ENABLED 0x3E00 +#define I2O_SCSI_HBA_DSC_BUS_BUSY 0x3F00 + +#define I2O_SCSI_HBA_DSC_QUEUE_FROZEN 0x4000 /****************************************************************************/ @@ -259,100 +259,100 @@ PRAGMA_PACK_PUSH /* Device Type */ -#define I2O_SCSI_DEVICE_TYPE_DIRECT 0x00 -#define I2O_SCSI_DEVICE_TYPE_SEQUENTIAL 0x01 -#define I2O_SCSI_DEVICE_TYPE_PRINTER 0x02 -#define I2O_SCSI_DEVICE_TYPE_PROCESSOR 0x03 -#define I2O_SCSI_DEVICE_TYPE_WORM 0x04 -#define I2O_SCSI_DEVICE_TYPE_CDROM 0x05 -#define I2O_SCSI_DEVICE_TYPE_SCANNER 0x06 -#define I2O_SCSI_DEVICE_TYPE_OPTICAL 0x07 -#define I2O_SCSI_DEVICE_TYPE_MEDIA_CHANGER 0x08 -#define I2O_SCSI_DEVICE_TYPE_COMM 0x09 -#define I2O_SCSI_DEVICE_GRAPHICS_1 0x0A -#define I2O_SCSI_DEVICE_GRAPHICS_2 0x0B -#define I2O_SCSI_DEVICE_TYPE_ARRAY_CONT 0x0C -#define I2O_SCSI_DEVICE_TYPE_SES 0x0D -#define I2O_SCSI_DEVICE_TYPE_UNKNOWN 0x1F +#define I2O_SCSI_DEVICE_TYPE_DIRECT 0x00 +#define I2O_SCSI_DEVICE_TYPE_SEQUENTIAL 0x01 +#define I2O_SCSI_DEVICE_TYPE_PRINTER 0x02 +#define I2O_SCSI_DEVICE_TYPE_PROCESSOR 0x03 +#define I2O_SCSI_DEVICE_TYPE_WORM 0x04 +#define I2O_SCSI_DEVICE_TYPE_CDROM 0x05 +#define I2O_SCSI_DEVICE_TYPE_SCANNER 0x06 +#define I2O_SCSI_DEVICE_TYPE_OPTICAL 0x07 +#define I2O_SCSI_DEVICE_TYPE_MEDIA_CHANGER 0x08 +#define I2O_SCSI_DEVICE_TYPE_COMM 0x09 +#define I2O_SCSI_DEVICE_GRAPHICS_1 0x0A +#define I2O_SCSI_DEVICE_GRAPHICS_2 0x0B +#define I2O_SCSI_DEVICE_TYPE_ARRAY_CONT 0x0C +#define I2O_SCSI_DEVICE_TYPE_SES 0x0D +#define I2O_SCSI_DEVICE_TYPE_UNKNOWN 0x1F /* Flags */ -#define I2O_SCSI_PERIPHERAL_TYPE_FLAG 0x01 -#define I2O_SCSI_PERIPHERAL_TYPE_PARALLEL 0x00 -#define I2O_SCSI_PERIPHERAL_TYPE_SERIAL 0x01 +#define I2O_SCSI_PERIPHERAL_TYPE_FLAG 0x01 +#define I2O_SCSI_PERIPHERAL_TYPE_PARALLEL 0x00 +#define I2O_SCSI_PERIPHERAL_TYPE_SERIAL 0x01 -#define I2O_SCSI_RESERVED_FLAG 0x02 +#define I2O_SCSI_RESERVED_FLAG 0x02 -#define I2O_SCSI_DISCONNECT_FLAG 0x04 -#define I2O_SCSI_DISABLE_DISCONNECT 0x00 -#define I2O_SCSI_ENABLE_DISCONNECT 0x04 +#define I2O_SCSI_DISCONNECT_FLAG 0x04 +#define I2O_SCSI_DISABLE_DISCONNECT 0x00 +#define I2O_SCSI_ENABLE_DISCONNECT 0x04 -#define I2O_SCSI_MODE_MASK 0x18 -#define I2O_SCSI_MODE_SET_DATA 0x00 -#define I2O_SCSI_MODE_SET_DEFAULT 0x08 -#define I2O_SCSI_MODE_SET_SAFEST 0x10 +#define I2O_SCSI_MODE_MASK 0x18 +#define I2O_SCSI_MODE_SET_DATA 0x00 +#define I2O_SCSI_MODE_SET_DEFAULT 0x08 +#define I2O_SCSI_MODE_SET_SAFEST 0x10 -#define I2O_SCSI_DATA_WIDTH_MASK 0x60 -#define I2O_SCSI_DATA_WIDTH_8 0x00 -#define I2O_SCSI_DATA_WIDTH_16 0x20 -#define I2O_SCSI_DATA_WIDTH_32 0x40 +#define I2O_SCSI_DATA_WIDTH_MASK 0x60 +#define I2O_SCSI_DATA_WIDTH_8 0x00 +#define I2O_SCSI_DATA_WIDTH_16 0x20 +#define I2O_SCSI_DATA_WIDTH_32 0x40 -#define I2O_SCSI_SYNC_NEGOTIATION_FLAG 0x80 -#define I2O_SCSI_DISABLE_SYNC_NEGOTIATION 0x00 -#define I2O_SCSI_ENABLE_SYNC_NEGOTIATION 0x80 +#define I2O_SCSI_SYNC_NEGOTIATION_FLAG 0x80 +#define I2O_SCSI_DISABLE_SYNC_NEGOTIATION 0x00 +#define I2O_SCSI_ENABLE_SYNC_NEGOTIATION 0x80 /* - 0001h - SCSI Device Bus Port Info Parameters Group defines */ /* Physical */ -#define I2O_SCSI_PORT_PHYS_OTHER 0x01 -#define I2O_SCSI_PORT_PHYS_UNKNOWN 0x02 -#define I2O_SCSI_PORT_PHYS_PARALLEL 0x03 -#define I2O_SCSI_PORT_PHYS_FIBRE_CHANNEL 0x04 -#define I2O_SCSI_PORT_PHYS_SERIAL_P1394 0x05 -#define I2O_SCSI_PORT_PHYS_SERIAL_SSA 0x06 +#define I2O_SCSI_PORT_PHYS_OTHER 0x01 +#define I2O_SCSI_PORT_PHYS_UNKNOWN 0x02 +#define I2O_SCSI_PORT_PHYS_PARALLEL 0x03 +#define I2O_SCSI_PORT_PHYS_FIBRE_CHANNEL 0x04 +#define I2O_SCSI_PORT_PHYS_SERIAL_P1394 0x05 +#define I2O_SCSI_PORT_PHYS_SERIAL_SSA 0x06 /* Electrical */ -#define I2O_SCSI_PORT_ELEC_OTHER 0x01 -#define I2O_SCSI_PORT_ELEC_UNKNOWN 0x02 -#define I2O_SCSI_PORT_ELEC_SINGLE_ENDED 0x03 -#define I2O_SCSI_PORT_ELEC_DIFFERENTIAL 0x04 -#define I2O_SCSI_PORT_ELEC_LOW_VOLT_DIFF 0x05 -#define I2O_SCSI_PORT_ELEC_OPTICAL 0x06 +#define I2O_SCSI_PORT_ELEC_OTHER 0x01 +#define I2O_SCSI_PORT_ELEC_UNKNOWN 0x02 +#define I2O_SCSI_PORT_ELEC_SINGLE_ENDED 0x03 +#define I2O_SCSI_PORT_ELEC_DIFFERENTIAL 0x04 +#define I2O_SCSI_PORT_ELEC_LOW_VOLT_DIFF 0x05 +#define I2O_SCSI_PORT_ELEC_OPTICAL 0x06 /* Isochronous */ -#define I2O_SCSI_PORT_ISOC_NO 0x00 -#define I2O_SCSI_PORT_ISOC_YES 0x01 -#define I2O_SCSI_PORT_ISOC_UNKNOWN 0x02 +#define I2O_SCSI_PORT_ISOC_NO 0x00 +#define I2O_SCSI_PORT_ISOC_YES 0x01 +#define I2O_SCSI_PORT_ISOC_UNKNOWN 0x02 /* Connector Type */ -#define I2O_SCSI_PORT_CONN_OTHER 0x01 -#define I2O_SCSI_PORT_CONN_UNKNOWN 0x02 -#define I2O_SCSI_PORT_CONN_NONE 0x03 -#define I2O_SCSI_PORT_CONN_SHIELDED_A_HD 0x04 -#define I2O_SCSI_PORT_CONN_UNSHIELDED_A_HD 0x05 -#define I2O_SCSI_PORT_CONN_SHIELDED_A_LD 0x06 -#define I2O_SCSI_PORT_CONN_UNSHIELDED_A_LD 0x07 -#define I2O_SCSI_PORT_CONN_SHIELDED_P_HD 0x08 -#define I2O_SCSI_PORT_CONN_UNSHIELDED_P_HD 0x09 -#define I2O_SCSI_PORT_CONN_SCA_I 0x0A -#define I2O_SCSI_PORT_CONN_SCA_II 0x0B -#define I2O_SCSI_PORT_CONN_FC_DB9 0x0C -#define I2O_SCSI_PORT_CONN_FC_FIBRE 0x0D -#define I2O_SCSI_PORT_CONN_FC_SCA_II_40 0x0E -#define I2O_SCSI_PORT_CONN_FC_SCA_II_20 0x0F -#define I2O_SCSI_PORT_CONN_FC_BNC 0x10 +#define I2O_SCSI_PORT_CONN_OTHER 0x01 +#define I2O_SCSI_PORT_CONN_UNKNOWN 0x02 +#define I2O_SCSI_PORT_CONN_NONE 0x03 +#define I2O_SCSI_PORT_CONN_SHIELDED_A_HD 0x04 +#define I2O_SCSI_PORT_CONN_UNSHIELDED_A_HD 0x05 +#define I2O_SCSI_PORT_CONN_SHIELDED_A_LD 0x06 +#define I2O_SCSI_PORT_CONN_UNSHIELDED_A_LD 0x07 +#define I2O_SCSI_PORT_CONN_SHIELDED_P_HD 0x08 +#define I2O_SCSI_PORT_CONN_UNSHIELDED_P_HD 0x09 +#define I2O_SCSI_PORT_CONN_SCA_I 0x0A +#define I2O_SCSI_PORT_CONN_SCA_II 0x0B +#define I2O_SCSI_PORT_CONN_FC_DB9 0x0C +#define I2O_SCSI_PORT_CONN_FC_FIBRE 0x0D +#define I2O_SCSI_PORT_CONN_FC_SCA_II_40 0x0E +#define I2O_SCSI_PORT_CONN_FC_SCA_II_20 0x0F +#define I2O_SCSI_PORT_CONN_FC_BNC 0x10 /* Connector Gender */ -#define I2O_SCSI_PORT_CONN_GENDER_OTHER 0x01 -#define I2O_SCSI_PORT_CONN_GENDER_UNKOWN 0x02 -#define I2O_SCSI_PORT_CONN_GENDER_FEMALE 0x03 -#define I2O_SCSI_PORT_CONN_GENDER_MALE 0x04 +#define I2O_SCSI_PORT_CONN_GENDER_OTHER 0x01 +#define I2O_SCSI_PORT_CONN_GENDER_UNKOWN 0x02 +#define I2O_SCSI_PORT_CONN_GENDER_FEMALE 0x03 +#define I2O_SCSI_PORT_CONN_GENDER_MALE 0x04 /* SCSI Device Group 0000h - Device Information Parameter Group */ @@ -392,7 +392,7 @@ typedef struct _I2O_SCSI_BUS_PORT_INFO_SCALAR { /* I2O SCSI Peripheral Event Indicator Assignment */ -#define I2O_SCSI_EVENT_SCSI_SMART 0x00000010 +#define I2O_SCSI_EVENT_SCSI_SMART 0x00000010 /****************************************************************************/ @@ -417,9 +417,9 @@ typedef struct _I2O_SCSI_SUCCESS_REPLY_MESSAGE_FRAME { /* I2O SCSI Peripheral Error Report Reply Message Frame */ #ifdef _WIN64 -#define I2O_SCSI_SENSE_DATA_SZ 44 +#define I2O_SCSI_SENSE_DATA_SZ 44 #else -#define I2O_SCSI_SENSE_DATA_SZ 40 +#define I2O_SCSI_SENSE_DATA_SZ 40 #endif typedef struct _I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME { @@ -459,24 +459,24 @@ typedef struct _I2O_SCSI_SCB_ABORT_MESSAGE { typedef U16 I2O_SCB_FLAGS; -#define I2O_SCB_FLAG_XFER_DIR_MASK 0xC000 -#define I2O_SCB_FLAG_NO_DATA_XFER 0x0000 -#define I2O_SCB_FLAG_XFER_FROM_DEVICE 0x4000 -#define I2O_SCB_FLAG_XFER_TO_DEVICE 0x8000 +#define I2O_SCB_FLAG_XFER_DIR_MASK 0xC000 +#define I2O_SCB_FLAG_NO_DATA_XFER 0x0000 +#define I2O_SCB_FLAG_XFER_FROM_DEVICE 0x4000 +#define I2O_SCB_FLAG_XFER_TO_DEVICE 0x8000 -#define I2O_SCB_FLAG_ENABLE_DISCONNECT 0x2000 +#define I2O_SCB_FLAG_ENABLE_DISCONNECT 0x2000 -#define I2O_SCB_FLAG_TAG_TYPE_MASK 0x0380 -#define I2O_SCB_FLAG_NO_TAG_QUEUEING 0x0000 -#define I2O_SCB_FLAG_SIMPLE_QUEUE_TAG 0x0080 -#define I2O_SCB_FLAG_HEAD_QUEUE_TAG 0x0100 -#define I2O_SCB_FLAG_ORDERED_QUEUE_TAG 0x0180 -#define I2O_SCB_FLAG_ACA_QUEUE_TAG 0x0200 +#define I2O_SCB_FLAG_TAG_TYPE_MASK 0x0380 +#define I2O_SCB_FLAG_NO_TAG_QUEUEING 0x0000 +#define I2O_SCB_FLAG_SIMPLE_QUEUE_TAG 0x0080 +#define I2O_SCB_FLAG_HEAD_QUEUE_TAG 0x0100 +#define I2O_SCB_FLAG_ORDERED_QUEUE_TAG 0x0180 +#define I2O_SCB_FLAG_ACA_QUEUE_TAG 0x0200 -#define I2O_SCB_FLAG_AUTOSENSE_MASK 0x0060 -#define I2O_SCB_FLAG_DISABLE_AUTOSENSE 0x0000 -#define I2O_SCB_FLAG_SENSE_DATA_IN_MESSAGE 0x0020 -#define I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER 0x0060 +#define I2O_SCB_FLAG_AUTOSENSE_MASK 0x0060 +#define I2O_SCB_FLAG_DISABLE_AUTOSENSE 0x0000 +#define I2O_SCB_FLAG_SENSE_DATA_IN_MESSAGE 0x0020 +#define I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER 0x0060 typedef struct _I2O_SCSI_SCB_EXECUTE_MESSAGE { I2O_MESSAGE_FRAME StdMessageFrame; |
