diff options
Diffstat (limited to 'sys/dev/an/if_an.c')
-rw-r--r-- | sys/dev/an/if_an.c | 3649 |
1 files changed, 3649 insertions, 0 deletions
diff --git a/sys/dev/an/if_an.c b/sys/dev/an/if_an.c new file mode 100644 index 0000000..9d6c568 --- /dev/null +++ b/sys/dev/an/if_an.c @@ -0,0 +1,3649 @@ +/* + * Copyright (c) 1997, 1998, 1999 + * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * Aironet 4500/4800 802.11 PCMCIA/ISA/PCI driver for FreeBSD. + * + * Written by Bill Paul <wpaul@ctr.columbia.edu> + * Electrical Engineering Department + * Columbia University, New York City + */ + +/* + * The Aironet 4500/4800 series cards come in PCMCIA, ISA and PCI form. + * This driver supports all three device types (PCI devices are supported + * through an extra PCI shim: /sys/dev/an/if_an_pci.c). ISA devices can be + * supported either using hard-coded IO port/IRQ settings or via Plug + * and Play. The 4500 series devices support 1Mbps and 2Mbps data rates. + * The 4800 devices support 1, 2, 5.5 and 11Mbps rates. + * + * Like the WaveLAN/IEEE cards, the Aironet NICs are all essentially + * PCMCIA devices. The ISA and PCI cards are a combination of a PCMCIA + * device and a PCMCIA to ISA or PCMCIA to PCI adapter card. There are + * a couple of important differences though: + * + * - Lucent ISA card looks to the host like a PCMCIA controller with + * a PCMCIA WaveLAN card inserted. This means that even desktop + * machines need to be configured with PCMCIA support in order to + * use WaveLAN/IEEE ISA cards. The Aironet cards on the other hand + * actually look like normal ISA and PCI devices to the host, so + * no PCMCIA controller support is needed + * + * The latter point results in a small gotcha. The Aironet PCMCIA + * cards can be configured for one of two operating modes depending + * on how the Vpp1 and Vpp2 programming voltages are set when the + * card is activated. In order to put the card in proper PCMCIA + * operation (where the CIS table is visible and the interface is + * programmed for PCMCIA operation), both Vpp1 and Vpp2 have to be + * set to 5 volts. FreeBSD by default doesn't set the Vpp voltages, + * which leaves the card in ISA/PCI mode, which prevents it from + * being activated as an PCMCIA device. + * + * Note that some PCMCIA controller software packages for Windows NT + * fail to set the voltages as well. + * + * The Aironet devices can operate in both station mode and access point + * mode. Typically, when programmed for station mode, the card can be set + * to automatically perform encapsulation/decapsulation of Ethernet II + * and 802.3 frames within 802.11 frames so that the host doesn't have + * to do it itself. This driver doesn't program the card that way: the + * driver handles all of the encapsulation/decapsulation itself. + */ + +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +#include "opt_inet.h" + +#ifdef INET +#define ANCACHE /* enable signal strength cache */ +#endif + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/sockio.h> +#include <sys/mbuf.h> +#include <sys/proc.h> +#include <sys/kernel.h> +#include <sys/socket.h> +#ifdef ANCACHE +#include <sys/syslog.h> +#endif +#include <sys/sysctl.h> +#include <machine/clock.h> /* for DELAY */ + +#include <sys/module.h> +#include <sys/sysctl.h> +#include <sys/bus.h> +#include <machine/bus.h> +#include <sys/rman.h> +#include <sys/lock.h> +#include <sys/mutex.h> +#include <machine/resource.h> +#include <sys/malloc.h> + +#include <net/if.h> +#include <net/if_arp.h> +#include <net/ethernet.h> +#include <net/if_dl.h> +#include <net/if_types.h> +#include <net/if_ieee80211.h> +#include <net/if_media.h> + +#ifdef INET +#include <netinet/in.h> +#include <netinet/in_systm.h> +#include <netinet/in_var.h> +#include <netinet/ip.h> +#endif + +#include <net/bpf.h> + +#include <machine/md_var.h> + +#include <dev/an/if_aironet_ieee.h> +#include <dev/an/if_anreg.h> + +/* These are global because we need them in sys/pci/if_an_p.c. */ +static void an_reset (struct an_softc *); +static int an_init_mpi350_desc (struct an_softc *); +static int an_ioctl (struct ifnet *, u_long, caddr_t); +static void an_init (void *); +static int an_init_tx_ring (struct an_softc *); +static void an_start (struct ifnet *); +static void an_watchdog (struct ifnet *); +static void an_rxeof (struct an_softc *); +static void an_txeof (struct an_softc *, int); + +static void an_promisc (struct an_softc *, int); +static int an_cmd (struct an_softc *, int, int); +static int an_cmd_struct (struct an_softc *, struct an_command *, + struct an_reply *); +static int an_read_record (struct an_softc *, struct an_ltv_gen *); +static int an_write_record (struct an_softc *, struct an_ltv_gen *); +static int an_read_data (struct an_softc *, int, int, caddr_t, int); +static int an_write_data (struct an_softc *, int, int, caddr_t, int); +static int an_seek (struct an_softc *, int, int, int); +static int an_alloc_nicmem (struct an_softc *, int, int *); +static int an_dma_malloc (struct an_softc *, bus_size_t, + struct an_dma_alloc *, int); +static void an_dma_free (struct an_softc *, struct an_dma_alloc *); +static void an_dma_malloc_cb (void *, bus_dma_segment_t *, int, int); +static void an_stats_update (void *); +static void an_setdef (struct an_softc *, struct an_req *); +#ifdef ANCACHE +static void an_cache_store (struct an_softc *, struct ether_header *, + struct mbuf *, u_int8_t, u_int8_t); +#endif + +/* function definitions for use with the Cisco's Linux configuration + utilities +*/ + +static int readrids(struct ifnet*, struct aironet_ioctl*); +static int writerids(struct ifnet*, struct aironet_ioctl*); +static int flashcard(struct ifnet*, struct aironet_ioctl*); + +static int cmdreset(struct ifnet *); +static int setflashmode(struct ifnet *); +static int flashgchar(struct ifnet *,int,int); +static int flashpchar(struct ifnet *,int,int); +static int flashputbuf(struct ifnet *); +static int flashrestart(struct ifnet *); +static int WaitBusy(struct ifnet *, int); +static int unstickbusy(struct ifnet *); + +static void an_dump_record (struct an_softc *,struct an_ltv_gen *, + char *); + +static int an_media_change (struct ifnet *); +static void an_media_status (struct ifnet *, struct ifmediareq *); + +static int an_dump = 0; +static int an_cache_mode = 0; + +#define DBM 0 +#define PERCENT 1 +#define RAW 2 + +static char an_conf[256]; +static char an_conf_cache[256]; + +/* sysctl vars */ + +SYSCTL_NODE(_hw, OID_AUTO, an, CTLFLAG_RD, 0, "Wireless driver parameters"); + +/* XXX violate ethernet/netgraph callback hooks */ +extern void (*ng_ether_attach_p)(struct ifnet *ifp); +extern void (*ng_ether_detach_p)(struct ifnet *ifp); + +static int +sysctl_an_dump(SYSCTL_HANDLER_ARGS) +{ + int error, r, last; + char *s = an_conf; + + last = an_dump; + + switch (an_dump) { + case 0: + strcpy(an_conf, "off"); + break; + case 1: + strcpy(an_conf, "type"); + break; + case 2: + strcpy(an_conf, "dump"); + break; + default: + snprintf(an_conf, 5, "%x", an_dump); + break; + } + + error = sysctl_handle_string(oidp, an_conf, sizeof(an_conf), req); + + if (strncmp(an_conf,"off", 3) == 0) { + an_dump = 0; + } + if (strncmp(an_conf,"dump", 4) == 0) { + an_dump = 1; + } + if (strncmp(an_conf,"type", 4) == 0) { + an_dump = 2; + } + if (*s == 'f') { + r = 0; + for (;;s++) { + if ((*s >= '0') && (*s <= '9')) { + r = r * 16 + (*s - '0'); + } else if ((*s >= 'a') && (*s <= 'f')) { + r = r * 16 + (*s - 'a' + 10); + } else { + break; + } + } + an_dump = r; + } + if (an_dump != last) + printf("Sysctl changed for Aironet driver\n"); + + return error; +} + +SYSCTL_PROC(_hw_an, OID_AUTO, an_dump, CTLTYPE_STRING | CTLFLAG_RW, + 0, sizeof(an_conf), sysctl_an_dump, "A", ""); + +static int +sysctl_an_cache_mode(SYSCTL_HANDLER_ARGS) +{ + int error, last; + + last = an_cache_mode; + + switch (an_cache_mode) { + case 1: + strcpy(an_conf_cache, "per"); + break; + case 2: + strcpy(an_conf_cache, "raw"); + break; + default: + strcpy(an_conf_cache, "dbm"); + break; + } + + error = sysctl_handle_string(oidp, an_conf_cache, + sizeof(an_conf_cache), req); + + if (strncmp(an_conf_cache,"dbm", 3) == 0) { + an_cache_mode = 0; + } + if (strncmp(an_conf_cache,"per", 3) == 0) { + an_cache_mode = 1; + } + if (strncmp(an_conf_cache,"raw", 3) == 0) { + an_cache_mode = 2; + } + + return error; +} + +SYSCTL_PROC(_hw_an, OID_AUTO, an_cache_mode, CTLTYPE_STRING | CTLFLAG_RW, + 0, sizeof(an_conf_cache), sysctl_an_cache_mode, "A", ""); + +/* + * We probe for an Aironet 4500/4800 card by attempting to + * read the default SSID list. On reset, the first entry in + * the SSID list will contain the name "tsunami." If we don't + * find this, then there's no card present. + */ +int +an_probe(dev) + device_t dev; +{ + struct an_softc *sc = device_get_softc(dev); + struct an_ltv_ssidlist ssid; + int error; + + bzero((char *)&ssid, sizeof(ssid)); + + error = an_alloc_port(dev, 0, AN_IOSIZ); + if (error != 0) + return (0); + + /* can't do autoprobing */ + if (rman_get_start(sc->port_res) == -1) + return(0); + + /* + * We need to fake up a softc structure long enough + * to be able to issue commands and call some of the + * other routines. + */ + sc->an_bhandle = rman_get_bushandle(sc->port_res); + sc->an_btag = rman_get_bustag(sc->port_res); + sc->an_unit = device_get_unit(dev); + + ssid.an_len = sizeof(ssid); + ssid.an_type = AN_RID_SSIDLIST; + + /* Make sure interrupts are disabled. */ + CSR_WRITE_2(sc, AN_INT_EN(sc->mpi350), 0); + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), 0xFFFF); + + an_reset(sc); + /* No need for an_init_mpi350_desc since it will be done in attach */ + + if (an_cmd(sc, AN_CMD_READCFG, 0)) + return(0); + + if (an_read_record(sc, (struct an_ltv_gen *)&ssid)) + return(0); + + /* See if the ssid matches what we expect ... but doesn't have to */ + if (strcmp(ssid.an_ssid1, AN_DEF_SSID)) + return(0); + + return(AN_IOSIZ); +} + +/* + * Allocate a port resource with the given resource id. + */ +int +an_alloc_port(dev, rid, size) + device_t dev; + int rid; + int size; +{ + struct an_softc *sc = device_get_softc(dev); + struct resource *res; + + res = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, + 0ul, ~0ul, size, RF_ACTIVE); + if (res) { + sc->port_rid = rid; + sc->port_res = res; + return (0); + } else { + return (ENOENT); + } +} + +/* + * Allocate a memory resource with the given resource id. + */ +int an_alloc_memory(device_t dev, int rid, int size) +{ + struct an_softc *sc = device_get_softc(dev); + struct resource *res; + + res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, + 0ul, ~0ul, size, RF_ACTIVE); + if (res) { + sc->mem_rid = rid; + sc->mem_res = res; + sc->mem_used = size; + return (0); + } else { + return (ENOENT); + } +} + +/* + * Allocate a auxilary memory resource with the given resource id. + */ +int an_alloc_aux_memory(device_t dev, int rid, int size) +{ + struct an_softc *sc = device_get_softc(dev); + struct resource *res; + + res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, + 0ul, ~0ul, size, RF_ACTIVE); + if (res) { + sc->mem_aux_rid = rid; + sc->mem_aux_res = res; + sc->mem_aux_used = size; + return (0); + } else { + return (ENOENT); + } +} + +/* + * Allocate an irq resource with the given resource id. + */ +int +an_alloc_irq(dev, rid, flags) + device_t dev; + int rid; + int flags; +{ + struct an_softc *sc = device_get_softc(dev); + struct resource *res; + + res = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, + 0ul, ~0ul, 1, (RF_ACTIVE | flags)); + if (res) { + sc->irq_rid = rid; + sc->irq_res = res; + return (0); + } else { + return (ENOENT); + } +} + +static void +an_dma_malloc_cb(arg, segs, nseg, error) + void *arg; + bus_dma_segment_t *segs; + int nseg; + int error; +{ + bus_addr_t *paddr = (bus_addr_t*) arg; + *paddr = segs->ds_addr; +} + +/* + * Alloc DMA memory and set the pointer to it + */ +static int +an_dma_malloc(sc, size, dma, mapflags) + struct an_softc *sc; + bus_size_t size; + struct an_dma_alloc *dma; + int mapflags; +{ + int r; + + r = bus_dmamap_create(sc->an_dtag, BUS_DMA_NOWAIT, &dma->an_dma_map); + if (r != 0) + goto fail_0; + + r = bus_dmamem_alloc(sc->an_dtag, (void**) &dma->an_dma_vaddr, + BUS_DMA_NOWAIT, &dma->an_dma_map); + if (r != 0) + goto fail_1; + + r = bus_dmamap_load(sc->an_dtag, dma->an_dma_map, dma->an_dma_vaddr, + size, + an_dma_malloc_cb, + &dma->an_dma_paddr, + mapflags | BUS_DMA_NOWAIT); + if (r != 0) + goto fail_2; + + dma->an_dma_size = size; + return (0); + +fail_2: + bus_dmamap_unload(sc->an_dtag, dma->an_dma_map); +fail_1: + bus_dmamem_free(sc->an_dtag, dma->an_dma_vaddr, dma->an_dma_map); +fail_0: + bus_dmamap_destroy(sc->an_dtag, dma->an_dma_map); + dma->an_dma_map = NULL; + return (r); +} + +static void +an_dma_free(sc, dma) + struct an_softc *sc; + struct an_dma_alloc *dma; +{ + bus_dmamap_unload(sc->an_dtag, dma->an_dma_map); + bus_dmamem_free(sc->an_dtag, dma->an_dma_vaddr, dma->an_dma_map); + bus_dmamap_destroy(sc->an_dtag, dma->an_dma_map); +} + +/* + * Release all resources + */ +void +an_release_resources(dev) + device_t dev; +{ + struct an_softc *sc = device_get_softc(dev); + int i; + + if (sc->port_res) { + bus_release_resource(dev, SYS_RES_IOPORT, + sc->port_rid, sc->port_res); + sc->port_res = 0; + } + if (sc->mem_res) { + bus_release_resource(dev, SYS_RES_MEMORY, + sc->mem_rid, sc->mem_res); + sc->mem_res = 0; + } + if (sc->mem_aux_res) { + bus_release_resource(dev, SYS_RES_MEMORY, + sc->mem_aux_rid, sc->mem_aux_res); + sc->mem_aux_res = 0; + } + if (sc->irq_res) { + bus_release_resource(dev, SYS_RES_IRQ, + sc->irq_rid, sc->irq_res); + sc->irq_res = 0; + } + if (sc->an_rid_buffer.an_dma_paddr) { + an_dma_free(sc, &sc->an_rid_buffer); + } + for (i = 0; i < AN_MAX_RX_DESC; i++) + if (sc->an_rx_buffer[i].an_dma_paddr) { + an_dma_free(sc, &sc->an_rx_buffer[i]); + } + for (i = 0; i < AN_MAX_TX_DESC; i++) + if (sc->an_tx_buffer[i].an_dma_paddr) { + an_dma_free(sc, &sc->an_tx_buffer[i]); + } + if (sc->an_dtag) { + bus_dma_tag_destroy(sc->an_dtag); + } + +} + +int +an_init_mpi350_desc(sc) + struct an_softc *sc; +{ + struct an_command cmd_struct; + struct an_reply reply; + struct an_card_rid_desc an_rid_desc; + struct an_card_rx_desc an_rx_desc; + struct an_card_tx_desc an_tx_desc; + int i, desc; + + if(!sc->an_rid_buffer.an_dma_paddr) + an_dma_malloc(sc, AN_RID_BUFFER_SIZE, + &sc->an_rid_buffer, 0); + for (i = 0; i < AN_MAX_RX_DESC; i++) + if(!sc->an_rx_buffer[i].an_dma_paddr) + an_dma_malloc(sc, AN_RX_BUFFER_SIZE, + &sc->an_rx_buffer[i], 0); + for (i = 0; i < AN_MAX_TX_DESC; i++) + if(!sc->an_tx_buffer[i].an_dma_paddr) + an_dma_malloc(sc, AN_TX_BUFFER_SIZE, + &sc->an_tx_buffer[i], 0); + + /* + * Allocate RX descriptor + */ + bzero(&reply,sizeof(reply)); + cmd_struct.an_cmd = AN_CMD_ALLOC_DESC; + cmd_struct.an_parm0 = AN_DESCRIPTOR_RX; + cmd_struct.an_parm1 = AN_RX_DESC_OFFSET; + cmd_struct.an_parm2 = AN_MAX_RX_DESC; + if (an_cmd_struct(sc, &cmd_struct, &reply)) { + printf("an%d: failed to allocate RX descriptor\n", + sc->an_unit); + return(EIO); + } + + for (desc = 0; desc < AN_MAX_RX_DESC; desc++) { + bzero(&an_rx_desc, sizeof(an_rx_desc)); + an_rx_desc.an_valid = 1; + an_rx_desc.an_len = AN_RX_BUFFER_SIZE; + an_rx_desc.an_done = 0; + an_rx_desc.an_phys = sc->an_rx_buffer[desc].an_dma_paddr; + + for (i = 0; i < sizeof(an_rx_desc) / 4; i++) + CSR_MEM_AUX_WRITE_4(sc, AN_RX_DESC_OFFSET + + (desc * sizeof(an_rx_desc)) + + (i * 4), + ((u_int32_t*)&an_rx_desc)[i]); + } + + /* + * Allocate TX descriptor + */ + + bzero(&reply,sizeof(reply)); + cmd_struct.an_cmd = AN_CMD_ALLOC_DESC; + cmd_struct.an_parm0 = AN_DESCRIPTOR_TX; + cmd_struct.an_parm1 = AN_TX_DESC_OFFSET; + cmd_struct.an_parm2 = AN_MAX_TX_DESC; + if (an_cmd_struct(sc, &cmd_struct, &reply)) { + printf("an%d: failed to allocate TX descriptor\n", + sc->an_unit); + return(EIO); + } + + for (desc = 0; desc < AN_MAX_TX_DESC; desc++) { + bzero(&an_tx_desc, sizeof(an_tx_desc)); + an_tx_desc.an_offset = 0; + an_tx_desc.an_eoc = 0; + an_tx_desc.an_valid = 0; + an_tx_desc.an_len = 0; + an_tx_desc.an_phys = sc->an_tx_buffer[desc].an_dma_paddr; + + for (i = 0; i < sizeof(an_tx_desc) / 4; i++) + CSR_MEM_AUX_WRITE_4(sc, AN_TX_DESC_OFFSET + + (desc * sizeof(an_tx_desc)) + + (i * 4), + ((u_int32_t*)&an_tx_desc)[i]); + } + + /* + * Allocate RID descriptor + */ + + bzero(&reply,sizeof(reply)); + cmd_struct.an_cmd = AN_CMD_ALLOC_DESC; + cmd_struct.an_parm0 = AN_DESCRIPTOR_HOSTRW; + cmd_struct.an_parm1 = AN_HOST_DESC_OFFSET; + cmd_struct.an_parm2 = 1; + if (an_cmd_struct(sc, &cmd_struct, &reply)) { + printf("an%d: failed to allocate host descriptor\n", + sc->an_unit); + return(EIO); + } + + bzero(&an_rid_desc, sizeof(an_rid_desc)); + an_rid_desc.an_valid = 1; + an_rid_desc.an_len = AN_RID_BUFFER_SIZE; + an_rid_desc.an_rid = 0; + an_rid_desc.an_phys = sc->an_rid_buffer.an_dma_paddr; + + for (i = 0; i < sizeof(an_rid_desc) / 4; i++) + CSR_MEM_AUX_WRITE_4(sc, AN_HOST_DESC_OFFSET + i * 4, + ((u_int32_t*)&an_rid_desc)[i]); + + return(0); +} + +int +an_attach(sc, unit, flags) + struct an_softc *sc; + int unit; + int flags; +{ + struct ifnet *ifp = &sc->arpcom.ac_if; + int error = EIO; + int i, nrate, mword; + u_int8_t r; + + mtx_init(&sc->an_mtx, device_get_nameunit(sc->an_dev), MTX_NETWORK_LOCK, + MTX_DEF | MTX_RECURSE); + + sc->an_gone = 0; + sc->an_associated = 0; + sc->an_monitor = 0; + sc->an_was_monitor = 0; + sc->an_flash_buffer = NULL; + + /* Reset the NIC. */ + an_reset(sc); + if (sc->mpi350) { + error = an_init_mpi350_desc(sc); + if (error) + goto fail; + } + + /* Load factory config */ + if (an_cmd(sc, AN_CMD_READCFG, 0)) { + printf("an%d: failed to load config data\n", sc->an_unit); + goto fail; + } + + /* Read the current configuration */ + sc->an_config.an_type = AN_RID_GENCONFIG; + sc->an_config.an_len = sizeof(struct an_ltv_genconfig); + if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_config)) { + printf("an%d: read record failed\n", sc->an_unit); + goto fail; + } + + /* Read the card capabilities */ + sc->an_caps.an_type = AN_RID_CAPABILITIES; + sc->an_caps.an_len = sizeof(struct an_ltv_caps); + if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_caps)) { + printf("an%d: read record failed\n", sc->an_unit); + goto fail; + } + + /* Read ssid list */ + sc->an_ssidlist.an_type = AN_RID_SSIDLIST; + sc->an_ssidlist.an_len = sizeof(struct an_ltv_ssidlist); + if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_ssidlist)) { + printf("an%d: read record failed\n", sc->an_unit); + goto fail; + } + + /* Read AP list */ + sc->an_aplist.an_type = AN_RID_APLIST; + sc->an_aplist.an_len = sizeof(struct an_ltv_aplist); + if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_aplist)) { + printf("an%d: read record failed\n", sc->an_unit); + goto fail; + } + +#ifdef ANCACHE + /* Read the RSSI <-> dBm map */ + sc->an_have_rssimap = 0; + if (sc->an_caps.an_softcaps & 8) { + sc->an_rssimap.an_type = AN_RID_RSSI_MAP; + sc->an_rssimap.an_len = sizeof(struct an_ltv_rssi_map); + if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_rssimap)) { + printf("an%d: unable to get RSSI <-> dBM map\n", sc->an_unit); + } else { + printf("an%d: got RSSI <-> dBM map\n", sc->an_unit); + sc->an_have_rssimap = 1; + } + } else { + printf("an%d: no RSSI <-> dBM map\n", sc->an_unit); + } +#endif + + bcopy((char *)&sc->an_caps.an_oemaddr, + (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN); + + printf("an%d: Ethernet address: %6D\n", sc->an_unit, + sc->arpcom.ac_enaddr, ":"); + + ifp->if_softc = sc; + ifp->if_unit = sc->an_unit = unit; + ifp->if_name = "an"; + ifp->if_mtu = ETHERMTU; + ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; + ifp->if_ioctl = an_ioctl; + ifp->if_output = ether_output; + ifp->if_start = an_start; + ifp->if_watchdog = an_watchdog; + ifp->if_init = an_init; + ifp->if_baudrate = 10000000; + ifp->if_snd.ifq_maxlen = IFQ_MAXLEN; + + bzero(sc->an_config.an_nodename, sizeof(sc->an_config.an_nodename)); + bcopy(AN_DEFAULT_NODENAME, sc->an_config.an_nodename, + sizeof(AN_DEFAULT_NODENAME) - 1); + + bzero(sc->an_ssidlist.an_ssid1, sizeof(sc->an_ssidlist.an_ssid1)); + bcopy(AN_DEFAULT_NETNAME, sc->an_ssidlist.an_ssid1, + sizeof(AN_DEFAULT_NETNAME) - 1); + sc->an_ssidlist.an_ssid1_len = strlen(AN_DEFAULT_NETNAME); + + sc->an_config.an_opmode = + AN_OPMODE_INFRASTRUCTURE_STATION; + + sc->an_tx_rate = 0; + bzero((char *)&sc->an_stats, sizeof(sc->an_stats)); + + nrate = 8; + + ifmedia_init(&sc->an_ifmedia, 0, an_media_change, an_media_status); + if_printf(ifp, "supported rates: "); +#define ADD(s, o) ifmedia_add(&sc->an_ifmedia, \ + IFM_MAKEWORD(IFM_IEEE80211, (s), (o), 0), 0, NULL) + ADD(IFM_AUTO, 0); + ADD(IFM_AUTO, IFM_IEEE80211_ADHOC); + for (i = 0; i < nrate; i++) { + r = sc->an_caps.an_rates[i]; + mword = ieee80211_rate2media(r, IEEE80211_T_DS); + if (mword == 0) + continue; + printf("%s%d%sMbps", (i != 0 ? " " : ""), + (r & IEEE80211_RATE_VAL) / 2, ((r & 0x1) != 0 ? ".5" : "")); + ADD(mword, 0); + ADD(mword, IFM_IEEE80211_ADHOC); + } + printf("\n"); + ifmedia_set(&sc->an_ifmedia, IFM_MAKEWORD(IFM_IEEE80211, + IFM_AUTO, 0, 0)); +#undef ADD + + /* + * Call MI attach routine. + */ + ether_ifattach(ifp, sc->arpcom.ac_enaddr); + callout_handle_init(&sc->an_stat_ch); + + return(0); +fail:; + mtx_destroy(&sc->an_mtx); + return(error); +} + +static void +an_rxeof(sc) + struct an_softc *sc; +{ + struct ifnet *ifp; + struct ether_header *eh; + struct ieee80211_frame *ih; + struct an_rxframe rx_frame; + struct an_rxframe_802_3 rx_frame_802_3; + struct mbuf *m; + int len, id, error = 0, i, count = 0; + int ieee80211_header_len; + u_char *bpf_buf; + u_short fc1; + struct an_card_rx_desc an_rx_desc; + u_int8_t *buf; + + ifp = &sc->arpcom.ac_if; + + if (!sc->mpi350) { + id = CSR_READ_2(sc, AN_RX_FID); + + if (sc->an_monitor && (ifp->if_flags & IFF_PROMISC)) { + /* read raw 802.11 packet */ + bpf_buf = sc->buf_802_11; + + /* read header */ + if (an_read_data(sc, id, 0x0, (caddr_t)&rx_frame, + sizeof(rx_frame))) { + ifp->if_ierrors++; + return; + } + + /* + * skip beacon by default since this increases the + * system load a lot + */ + + if (!(sc->an_monitor & AN_MONITOR_INCLUDE_BEACON) && + (rx_frame.an_frame_ctl & + IEEE80211_FC0_SUBTYPE_BEACON)) { + return; + } + + if (sc->an_monitor & AN_MONITOR_AIRONET_HEADER) { + len = rx_frame.an_rx_payload_len + + sizeof(rx_frame); + /* Check for insane frame length */ + if (len > sizeof(sc->buf_802_11)) { + printf("an%d: oversized packet " + "received (%d, %d)\n", + sc->an_unit, len, MCLBYTES); + ifp->if_ierrors++; + return; + } + + bcopy((char *)&rx_frame, + bpf_buf, sizeof(rx_frame)); + + error = an_read_data(sc, id, sizeof(rx_frame), + (caddr_t)bpf_buf+sizeof(rx_frame), + rx_frame.an_rx_payload_len); + } else { + fc1=rx_frame.an_frame_ctl >> 8; + ieee80211_header_len = + sizeof(struct ieee80211_frame); + if ((fc1 & IEEE80211_FC1_DIR_TODS) && + (fc1 & IEEE80211_FC1_DIR_FROMDS)) { + ieee80211_header_len += ETHER_ADDR_LEN; + } + + len = rx_frame.an_rx_payload_len + + ieee80211_header_len; + /* Check for insane frame length */ + if (len > sizeof(sc->buf_802_11)) { + printf("an%d: oversized packet " + "received (%d, %d)\n", + sc->an_unit, len, MCLBYTES); + ifp->if_ierrors++; + return; + } + + ih = (struct ieee80211_frame *)bpf_buf; + + bcopy((char *)&rx_frame.an_frame_ctl, + (char *)ih, ieee80211_header_len); + + error = an_read_data(sc, id, sizeof(rx_frame) + + rx_frame.an_gaplen, + (caddr_t)ih +ieee80211_header_len, + rx_frame.an_rx_payload_len); + } + /* dump raw 802.11 packet to bpf and skip ip stack */ + BPF_TAP(ifp, bpf_buf, len); + } else { + MGETHDR(m, M_DONTWAIT, MT_DATA); + if (m == NULL) { + ifp->if_ierrors++; + return; + } + MCLGET(m, M_DONTWAIT); + if (!(m->m_flags & M_EXT)) { + m_freem(m); + ifp->if_ierrors++; + return; + } + m->m_pkthdr.rcvif = ifp; + /* Read Ethernet encapsulated packet */ + +#ifdef ANCACHE + /* Read NIC frame header */ + if (an_read_data(sc, id, 0, (caddr_t)&rx_frame, + sizeof(rx_frame))) { + ifp->if_ierrors++; + return; + } +#endif + /* Read in the 802_3 frame header */ + if (an_read_data(sc, id, 0x34, + (caddr_t)&rx_frame_802_3, + sizeof(rx_frame_802_3))) { + ifp->if_ierrors++; + return; + } + if (rx_frame_802_3.an_rx_802_3_status != 0) { + ifp->if_ierrors++; + return; + } + /* Check for insane frame length */ + len = rx_frame_802_3.an_rx_802_3_payload_len; + if (len > sizeof(sc->buf_802_11)) { + printf("an%d: oversized packet " + "received (%d, %d)\n", + sc->an_unit, len, MCLBYTES); + ifp->if_ierrors++; + return; + } + m->m_pkthdr.len = m->m_len = + rx_frame_802_3.an_rx_802_3_payload_len + 12; + + eh = mtod(m, struct ether_header *); + + bcopy((char *)&rx_frame_802_3.an_rx_dst_addr, + (char *)&eh->ether_dhost, ETHER_ADDR_LEN); + bcopy((char *)&rx_frame_802_3.an_rx_src_addr, + (char *)&eh->ether_shost, ETHER_ADDR_LEN); + + /* in mbuf header type is just before payload */ + error = an_read_data(sc, id, 0x44, + (caddr_t)&(eh->ether_type), + rx_frame_802_3.an_rx_802_3_payload_len); + + if (error) { + m_freem(m); + ifp->if_ierrors++; + return; + } + ifp->if_ipackets++; + + /* Receive packet. */ +#ifdef ANCACHE + an_cache_store(sc, eh, m, + rx_frame.an_rx_signal_strength, + rx_frame.an_rsvd0); +#endif + (*ifp->if_input)(ifp, m); + } + + } else { /* MPI-350 */ + for (count = 0; count < AN_MAX_RX_DESC; count++){ + for (i = 0; i < sizeof(an_rx_desc) / 4; i++) + ((u_int32_t*)&an_rx_desc)[i] + = CSR_MEM_AUX_READ_4(sc, + AN_RX_DESC_OFFSET + + (count * sizeof(an_rx_desc)) + + (i * 4)); + + if (an_rx_desc.an_done && !an_rx_desc.an_valid) { + buf = sc->an_rx_buffer[count].an_dma_vaddr; + + MGETHDR(m, M_DONTWAIT, MT_DATA); + if (m == NULL) { + ifp->if_ierrors++; + return; + } + MCLGET(m, M_DONTWAIT); + if (!(m->m_flags & M_EXT)) { + m_freem(m); + ifp->if_ierrors++; + return; + } + m->m_pkthdr.rcvif = ifp; + /* Read Ethernet encapsulated packet */ + + /* + * No ANCACHE support since we just get back + * an Ethernet packet no 802.11 info + */ +#if 0 +#ifdef ANCACHE + /* Read NIC frame header */ + bcopy(buf, (caddr_t)&rx_frame, + sizeof(rx_frame)); +#endif +#endif + /* Check for insane frame length */ + len = an_rx_desc.an_len + 12; + if (len > MCLBYTES) { + printf("an%d: oversized packet " + "received (%d, %d)\n", + sc->an_unit, len, MCLBYTES); + ifp->if_ierrors++; + return; + } + + m->m_pkthdr.len = m->m_len = + an_rx_desc.an_len + 12; + + eh = mtod(m, struct ether_header *); + + bcopy(buf, (char *)eh, + m->m_pkthdr.len); + + ifp->if_ipackets++; + + /* Receive packet. */ +#if 0 +#ifdef ANCACHE + an_cache_store(sc, eh, m, + rx_frame.an_rx_signal_strength, + rx_frame.an_rsvd0); +#endif +#endif + (*ifp->if_input)(ifp, m); + + an_rx_desc.an_valid = 1; + an_rx_desc.an_len = AN_RX_BUFFER_SIZE; + an_rx_desc.an_done = 0; + an_rx_desc.an_phys = + sc->an_rx_buffer[count].an_dma_paddr; + + for (i = 0; i < sizeof(an_rx_desc) / 4; i++) + CSR_MEM_AUX_WRITE_4(sc, + AN_RX_DESC_OFFSET + + (count * sizeof(an_rx_desc)) + + (i * 4), + ((u_int32_t*)&an_rx_desc)[i]); + + } else { + printf("an%d: Didn't get valid RX packet " + "%x %x %d\n", + sc->an_unit, + an_rx_desc.an_done, + an_rx_desc.an_valid, an_rx_desc.an_len); + } + } + } +} + +static void +an_txeof(sc, status) + struct an_softc *sc; + int status; +{ + struct ifnet *ifp; + int id, i; + + ifp = &sc->arpcom.ac_if; + + ifp->if_timer = 0; + ifp->if_flags &= ~IFF_OACTIVE; + + if (!sc->mpi350) { + id = CSR_READ_2(sc, AN_TX_CMP_FID); + + if (status & AN_EV_TX_EXC) { + ifp->if_oerrors++; + } else + ifp->if_opackets++; + + for (i = 0; i < AN_TX_RING_CNT; i++) { + if (id == sc->an_rdata.an_tx_ring[i]) { + sc->an_rdata.an_tx_ring[i] = 0; + break; + } + } + + AN_INC(sc->an_rdata.an_tx_cons, AN_TX_RING_CNT); + } else { /* MPI 350 */ + AN_INC(sc->an_rdata.an_tx_cons, AN_MAX_TX_DESC); + if (sc->an_rdata.an_tx_prod == + sc->an_rdata.an_tx_cons) + sc->an_rdata.an_tx_empty = 1; + } + + return; +} + +/* + * We abuse the stats updater to check the current NIC status. This + * is important because we don't want to allow transmissions until + * the NIC has synchronized to the current cell (either as the master + * in an ad-hoc group, or as a station connected to an access point). + */ +static void +an_stats_update(xsc) + void *xsc; +{ + struct an_softc *sc; + struct ifnet *ifp; + + sc = xsc; + AN_LOCK(sc); + ifp = &sc->arpcom.ac_if; + + sc->an_status.an_type = AN_RID_STATUS; + sc->an_status.an_len = sizeof(struct an_ltv_status); + an_read_record(sc, (struct an_ltv_gen *)&sc->an_status); + + if (sc->an_status.an_opmode & AN_STATUS_OPMODE_IN_SYNC) + sc->an_associated = 1; + else + sc->an_associated = 0; + + /* Don't do this while we're transmitting */ + if (ifp->if_flags & IFF_OACTIVE) { + sc->an_stat_ch = timeout(an_stats_update, sc, hz); + AN_UNLOCK(sc); + return; + } + + sc->an_stats.an_len = sizeof(struct an_ltv_stats); + sc->an_stats.an_type = AN_RID_32BITS_CUM; + an_read_record(sc, (struct an_ltv_gen *)&sc->an_stats.an_len); + + sc->an_stat_ch = timeout(an_stats_update, sc, hz); + AN_UNLOCK(sc); + + return; +} + +void +an_intr(xsc) + void *xsc; +{ + struct an_softc *sc; + struct ifnet *ifp; + u_int16_t status; + + sc = (struct an_softc*)xsc; + + AN_LOCK(sc); + + if (sc->an_gone) { + AN_UNLOCK(sc); + return; + } + + ifp = &sc->arpcom.ac_if; + + /* Disable interrupts. */ + CSR_WRITE_2(sc, AN_INT_EN(sc->mpi350), 0); + + status = CSR_READ_2(sc, AN_EVENT_STAT(sc->mpi350)); + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), ~AN_INTRS); + + if (status & AN_EV_AWAKE) { + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_AWAKE); + } + + if (status & AN_EV_LINKSTAT) { + if (CSR_READ_2(sc, AN_LINKSTAT(sc->mpi350)) + == AN_LINKSTAT_ASSOCIATED) + sc->an_associated = 1; + else + sc->an_associated = 0; + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_LINKSTAT); + } + + if (status & AN_EV_RX) { + an_rxeof(sc); + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_RX); + } + + if (status & AN_EV_TX) { + an_txeof(sc, status); + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_TX); + } + + if (status & AN_EV_TX_EXC) { + an_txeof(sc, status); + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_TX_EXC); + } + + if (status & AN_EV_ALLOC) + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_ALLOC); + + /* Re-enable interrupts. */ + CSR_WRITE_2(sc, AN_INT_EN(sc->mpi350), AN_INTRS); + + if ((ifp->if_flags & IFF_UP) && (ifp->if_snd.ifq_head != NULL)) + an_start(ifp); + + AN_UNLOCK(sc); + + return; +} + + +static int +an_cmd_struct(sc, cmd, reply) + struct an_softc *sc; + struct an_command *cmd; + struct an_reply *reply; +{ + int i; + + for (i = 0; i != AN_TIMEOUT; i++) { + if (CSR_READ_2(sc, AN_COMMAND(sc->mpi350)) & AN_CMD_BUSY) { + DELAY(1000); + } else + break; + } + if( i == AN_TIMEOUT) { + printf("BUSY\n"); + return(ETIMEDOUT); + } + + CSR_WRITE_2(sc, AN_PARAM0(sc->mpi350), cmd->an_parm0); + CSR_WRITE_2(sc, AN_PARAM1(sc->mpi350), cmd->an_parm1); + CSR_WRITE_2(sc, AN_PARAM2(sc->mpi350), cmd->an_parm2); + CSR_WRITE_2(sc, AN_COMMAND(sc->mpi350), cmd->an_cmd); + + for (i = 0; i < AN_TIMEOUT; i++) { + if (CSR_READ_2(sc, AN_EVENT_STAT(sc->mpi350)) & AN_EV_CMD) + break; + DELAY(1000); + } + + reply->an_resp0 = CSR_READ_2(sc, AN_RESP0(sc->mpi350)); + reply->an_resp1 = CSR_READ_2(sc, AN_RESP1(sc->mpi350)); + reply->an_resp2 = CSR_READ_2(sc, AN_RESP2(sc->mpi350)); + reply->an_status = CSR_READ_2(sc, AN_STATUS(sc->mpi350)); + + if (CSR_READ_2(sc, AN_COMMAND(sc->mpi350)) & AN_CMD_BUSY) + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_CLR_STUCK_BUSY); + + /* Ack the command */ + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_CMD); + + if (i == AN_TIMEOUT) + return(ETIMEDOUT); + + return(0); +} + +static int +an_cmd(sc, cmd, val) + struct an_softc *sc; + int cmd; + int val; +{ + int i, s = 0; + + CSR_WRITE_2(sc, AN_PARAM0(sc->mpi350), val); + CSR_WRITE_2(sc, AN_PARAM1(sc->mpi350), 0); + CSR_WRITE_2(sc, AN_PARAM2(sc->mpi350), 0); + CSR_WRITE_2(sc, AN_COMMAND(sc->mpi350), cmd); + + for (i = 0; i < AN_TIMEOUT; i++) { + if (CSR_READ_2(sc, AN_EVENT_STAT(sc->mpi350)) & AN_EV_CMD) + break; + else { + if (CSR_READ_2(sc, AN_COMMAND(sc->mpi350)) == cmd) + CSR_WRITE_2(sc, AN_COMMAND(sc->mpi350), cmd); + } + } + + for (i = 0; i < AN_TIMEOUT; i++) { + CSR_READ_2(sc, AN_RESP0(sc->mpi350)); + CSR_READ_2(sc, AN_RESP1(sc->mpi350)); + CSR_READ_2(sc, AN_RESP2(sc->mpi350)); + s = CSR_READ_2(sc, AN_STATUS(sc->mpi350)); + if ((s & AN_STAT_CMD_CODE) == (cmd & AN_STAT_CMD_CODE)) + break; + } + + /* Ack the command */ + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_CMD); + + if (CSR_READ_2(sc, AN_COMMAND(sc->mpi350)) & AN_CMD_BUSY) + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_CLR_STUCK_BUSY); + + if (i == AN_TIMEOUT) + return(ETIMEDOUT); + + return(0); +} + +/* + * This reset sequence may look a little strange, but this is the + * most reliable method I've found to really kick the NIC in the + * head and force it to reboot correctly. + */ +static void +an_reset(sc) + struct an_softc *sc; +{ + if (sc->an_gone) + return; + + an_cmd(sc, AN_CMD_ENABLE, 0); + an_cmd(sc, AN_CMD_FW_RESTART, 0); + an_cmd(sc, AN_CMD_NOOP2, 0); + + if (an_cmd(sc, AN_CMD_FORCE_SYNCLOSS, 0) == ETIMEDOUT) + printf("an%d: reset failed\n", sc->an_unit); + + an_cmd(sc, AN_CMD_DISABLE, 0); + + return; +} + +/* + * Read an LTV record from the NIC. + */ +static int +an_read_record(sc, ltv) + struct an_softc *sc; + struct an_ltv_gen *ltv; +{ + struct an_ltv_gen *an_ltv; + struct an_card_rid_desc an_rid_desc; + struct an_command cmd; + struct an_reply reply; + u_int16_t *ptr; + u_int8_t *ptr2; + int i, len; + + if (ltv->an_len < 4 || ltv->an_type == 0) + return(EINVAL); + + if (!sc->mpi350){ + /* Tell the NIC to enter record read mode. */ + if (an_cmd(sc, AN_CMD_ACCESS|AN_ACCESS_READ, ltv->an_type)) { + printf("an%d: RID access failed\n", sc->an_unit); + return(EIO); + } + + /* Seek to the record. */ + if (an_seek(sc, ltv->an_type, 0, AN_BAP1)) { + printf("an%d: seek to record failed\n", sc->an_unit); + return(EIO); + } + + /* + * Read the length and record type and make sure they + * match what we expect (this verifies that we have enough + * room to hold all of the returned data). + * Length includes type but not length. + */ + len = CSR_READ_2(sc, AN_DATA1); + if (len > (ltv->an_len - 2)) { + printf("an%d: record length mismatch -- expected %d, " + "got %d for Rid %x\n", sc->an_unit, + ltv->an_len - 2, len, ltv->an_type); + len = ltv->an_len - 2; + } else { + ltv->an_len = len + 2; + } + + /* Now read the data. */ + len -= 2; /* skip the type */ + ptr = <v->an_val; + for (i = len; i > 1; i -= 2) + *ptr++ = CSR_READ_2(sc, AN_DATA1); + if (i) { + ptr2 = (u_int8_t *)ptr; + *ptr2 = CSR_READ_1(sc, AN_DATA1); + } + } else { /* MPI-350 */ + an_rid_desc.an_valid = 1; + an_rid_desc.an_len = AN_RID_BUFFER_SIZE; + an_rid_desc.an_rid = 0; + an_rid_desc.an_phys = sc->an_rid_buffer.an_dma_paddr; + bzero(sc->an_rid_buffer.an_dma_vaddr, AN_RID_BUFFER_SIZE); + + bzero(&cmd, sizeof(cmd)); + bzero(&reply, sizeof(reply)); + cmd.an_cmd = AN_CMD_ACCESS|AN_ACCESS_READ; + cmd.an_parm0 = ltv->an_type; + + for (i = 0; i < sizeof(an_rid_desc) / 4; i++) + CSR_MEM_AUX_WRITE_4(sc, AN_HOST_DESC_OFFSET + i * 4, + ((u_int32_t*)&an_rid_desc)[i]); + + if (an_cmd_struct(sc, &cmd, &reply) + || reply.an_status & AN_CMD_QUAL_MASK) { + printf("an%d: failed to read RID %x %x %x %x %x, %d\n", + sc->an_unit, ltv->an_type, + reply.an_status, + reply.an_resp0, + reply.an_resp1, + reply.an_resp2, + i); + return(EIO); + } + + an_ltv = (struct an_ltv_gen *)sc->an_rid_buffer.an_dma_vaddr; + if (an_ltv->an_len + 2 < an_rid_desc.an_len) { + an_rid_desc.an_len = an_ltv->an_len; + } + + if (an_rid_desc.an_len > 2) + bcopy(&an_ltv->an_type, + <v->an_val, + an_rid_desc.an_len - 2); + ltv->an_len = an_rid_desc.an_len + 2; + } + + if (an_dump) + an_dump_record(sc, ltv, "Read"); + + return(0); +} + +/* + * Same as read, except we inject data instead of reading it. + */ +static int +an_write_record(sc, ltv) + struct an_softc *sc; + struct an_ltv_gen *ltv; +{ + struct an_card_rid_desc an_rid_desc; + struct an_command cmd; + struct an_reply reply; + char *buf; + u_int16_t *ptr; + u_int8_t *ptr2; + int i, len; + + if (an_dump) + an_dump_record(sc, ltv, "Write"); + + if (!sc->mpi350){ + if (an_cmd(sc, AN_CMD_ACCESS|AN_ACCESS_READ, ltv->an_type)) + return(EIO); + + if (an_seek(sc, ltv->an_type, 0, AN_BAP1)) + return(EIO); + + /* + * Length includes type but not length. + */ + len = ltv->an_len - 2; + CSR_WRITE_2(sc, AN_DATA1, len); + + len -= 2; /* skip the type */ + ptr = <v->an_val; + for (i = len; i > 1; i -= 2) + CSR_WRITE_2(sc, AN_DATA1, *ptr++); + if (i) { + ptr2 = (u_int8_t *)ptr; + CSR_WRITE_1(sc, AN_DATA0, *ptr2); + } + + if (an_cmd(sc, AN_CMD_ACCESS|AN_ACCESS_WRITE, ltv->an_type)) + return(EIO); + } else { + /* MPI-350 */ + + for (i = 0; i != AN_TIMEOUT; i++) { + if (CSR_READ_2(sc, AN_COMMAND(sc->mpi350)) + & AN_CMD_BUSY) { + DELAY(10); + } else + break; + } + if (i == AN_TIMEOUT) { + printf("BUSY\n"); + } + + an_rid_desc.an_valid = 1; + an_rid_desc.an_len = ltv->an_len - 2; + an_rid_desc.an_rid = ltv->an_type; + an_rid_desc.an_phys = sc->an_rid_buffer.an_dma_paddr; + + bcopy(<v->an_type, sc->an_rid_buffer.an_dma_vaddr, + an_rid_desc.an_len); + + bzero(&cmd,sizeof(cmd)); + bzero(&reply,sizeof(reply)); + cmd.an_cmd = AN_CMD_ACCESS|AN_ACCESS_WRITE; + cmd.an_parm0 = ltv->an_type; + + for (i = 0; i < sizeof(an_rid_desc) / 4; i++) + CSR_MEM_AUX_WRITE_4(sc, AN_HOST_DESC_OFFSET + i * 4, + ((u_int32_t*)&an_rid_desc)[i]); + + DELAY(100000); + + if ((i = an_cmd_struct(sc, &cmd, &reply))) { + printf("an%d: failed to write RID 1 %x %x %x %x %x, %d\n", + sc->an_unit, ltv->an_type, + reply.an_status, + reply.an_resp0, + reply.an_resp1, + reply.an_resp2, + i); + return(EIO); + } + + ptr = (u_int16_t *)buf; + + if (reply.an_status & AN_CMD_QUAL_MASK) { + printf("an%d: failed to write RID 2 %x %x %x %x %x, %d\n", + sc->an_unit, ltv->an_type, + reply.an_status, + reply.an_resp0, + reply.an_resp1, + reply.an_resp2, + i); + return(EIO); + } + DELAY(100000); + } + + return(0); +} + +static void +an_dump_record(sc, ltv, string) + struct an_softc *sc; + struct an_ltv_gen *ltv; + char *string; +{ + u_int8_t *ptr2; + int len; + int i; + int count = 0; + char buf[17], temp; + + len = ltv->an_len - 4; + printf("an%d: RID %4x, Length %4d, Mode %s\n", + sc->an_unit, ltv->an_type, ltv->an_len - 4, string); + + if (an_dump == 1 || (an_dump == ltv->an_type)) { + printf("an%d:\t", sc->an_unit); + bzero(buf,sizeof(buf)); + + ptr2 = (u_int8_t *)<v->an_val; + for (i = len; i > 0; i--) { + printf("%02x ", *ptr2); + + temp = *ptr2++; + if (temp >= ' ' && temp <= '~') + buf[count] = temp; + else if (temp >= 'A' && temp <= 'Z') + buf[count] = temp; + else + buf[count] = '.'; + if (++count == 16) { + count = 0; + printf("%s\n",buf); + printf("an%d:\t", sc->an_unit); + bzero(buf,sizeof(buf)); + } + } + for (; count != 16; count++) { + printf(" "); + } + printf(" %s\n",buf); + } +} + +static int +an_seek(sc, id, off, chan) + struct an_softc *sc; + int id, off, chan; +{ + int i; + int selreg, offreg; + + switch (chan) { + case AN_BAP0: + selreg = AN_SEL0; + offreg = AN_OFF0; + break; + case AN_BAP1: + selreg = AN_SEL1; + offreg = AN_OFF1; + break; + default: + printf("an%d: invalid data path: %x\n", sc->an_unit, chan); + return(EIO); + } + + CSR_WRITE_2(sc, selreg, id); + CSR_WRITE_2(sc, offreg, off); + + for (i = 0; i < AN_TIMEOUT; i++) { + if (!(CSR_READ_2(sc, offreg) & (AN_OFF_BUSY|AN_OFF_ERR))) + break; + } + + if (i == AN_TIMEOUT) + return(ETIMEDOUT); + + return(0); +} + +static int +an_read_data(sc, id, off, buf, len) + struct an_softc *sc; + int id, off; + caddr_t buf; + int len; +{ + int i; + u_int16_t *ptr; + u_int8_t *ptr2; + + if (off != -1) { + if (an_seek(sc, id, off, AN_BAP1)) + return(EIO); + } + + ptr = (u_int16_t *)buf; + for (i = len; i > 1; i -= 2) + *ptr++ = CSR_READ_2(sc, AN_DATA1); + if (i) { + ptr2 = (u_int8_t *)ptr; + *ptr2 = CSR_READ_1(sc, AN_DATA1); + } + + return(0); +} + +static int +an_write_data(sc, id, off, buf, len) + struct an_softc *sc; + int id, off; + caddr_t buf; + int len; +{ + int i; + u_int16_t *ptr; + u_int8_t *ptr2; + + if (off != -1) { + if (an_seek(sc, id, off, AN_BAP0)) + return(EIO); + } + + ptr = (u_int16_t *)buf; + for (i = len; i > 1; i -= 2) + CSR_WRITE_2(sc, AN_DATA0, *ptr++); + if (i) { + ptr2 = (u_int8_t *)ptr; + CSR_WRITE_1(sc, AN_DATA0, *ptr2); + } + + return(0); +} + +/* + * Allocate a region of memory inside the NIC and zero + * it out. + */ +static int +an_alloc_nicmem(sc, len, id) + struct an_softc *sc; + int len; + int *id; +{ + int i; + + if (an_cmd(sc, AN_CMD_ALLOC_MEM, len)) { + printf("an%d: failed to allocate %d bytes on NIC\n", + sc->an_unit, len); + return(ENOMEM); + } + + for (i = 0; i < AN_TIMEOUT; i++) { + if (CSR_READ_2(sc, AN_EVENT_STAT(sc->mpi350)) & AN_EV_ALLOC) + break; + } + + if (i == AN_TIMEOUT) + return(ETIMEDOUT); + + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_ALLOC); + *id = CSR_READ_2(sc, AN_ALLOC_FID); + + if (an_seek(sc, *id, 0, AN_BAP0)) + return(EIO); + + for (i = 0; i < len / 2; i++) + CSR_WRITE_2(sc, AN_DATA0, 0); + + return(0); +} + +static void +an_setdef(sc, areq) + struct an_softc *sc; + struct an_req *areq; +{ + struct sockaddr_dl *sdl; + struct ifaddr *ifa; + struct ifnet *ifp; + struct an_ltv_genconfig *cfg; + struct an_ltv_ssidlist *ssid; + struct an_ltv_aplist *ap; + struct an_ltv_gen *sp; + + ifp = &sc->arpcom.ac_if; + + switch (areq->an_type) { + case AN_RID_GENCONFIG: + cfg = (struct an_ltv_genconfig *)areq; + + ifa = ifaddr_byindex(ifp->if_index); + sdl = (struct sockaddr_dl *)ifa->ifa_addr; + bcopy((char *)&cfg->an_macaddr, (char *)&sc->arpcom.ac_enaddr, + ETHER_ADDR_LEN); + bcopy((char *)&cfg->an_macaddr, LLADDR(sdl), ETHER_ADDR_LEN); + + bcopy((char *)cfg, (char *)&sc->an_config, + sizeof(struct an_ltv_genconfig)); + break; + case AN_RID_SSIDLIST: + ssid = (struct an_ltv_ssidlist *)areq; + bcopy((char *)ssid, (char *)&sc->an_ssidlist, + sizeof(struct an_ltv_ssidlist)); + break; + case AN_RID_APLIST: + ap = (struct an_ltv_aplist *)areq; + bcopy((char *)ap, (char *)&sc->an_aplist, + sizeof(struct an_ltv_aplist)); + break; + case AN_RID_TX_SPEED: + sp = (struct an_ltv_gen *)areq; + sc->an_tx_rate = sp->an_val; + + /* Read the current configuration */ + sc->an_config.an_type = AN_RID_GENCONFIG; + sc->an_config.an_len = sizeof(struct an_ltv_genconfig); + an_read_record(sc, (struct an_ltv_gen *)&sc->an_config); + cfg = &sc->an_config; + + /* clear other rates and set the only one we want */ + bzero(cfg->an_rates, sizeof(cfg->an_rates)); + cfg->an_rates[0] = sc->an_tx_rate; + + /* Save the new rate */ + sc->an_config.an_type = AN_RID_GENCONFIG; + sc->an_config.an_len = sizeof(struct an_ltv_genconfig); + break; + case AN_RID_WEP_TEMP: + /* Cache the temp keys */ + bcopy(areq, + &sc->an_temp_keys[((struct an_ltv_key *)areq)->kindex], + sizeof(struct an_ltv_key)); + case AN_RID_WEP_PERM: + case AN_RID_LEAPUSERNAME: + case AN_RID_LEAPPASSWORD: + /* Disable the MAC. */ + an_cmd(sc, AN_CMD_DISABLE, 0); + + /* Write the key */ + an_write_record(sc, (struct an_ltv_gen *)areq); + + /* Turn the MAC back on. */ + an_cmd(sc, AN_CMD_ENABLE, 0); + + break; + case AN_RID_MONITOR_MODE: + cfg = (struct an_ltv_genconfig *)areq; + bpfdetach(ifp); + if (ng_ether_detach_p != NULL) + (*ng_ether_detach_p) (ifp); + sc->an_monitor = cfg->an_len; + + if (sc->an_monitor & AN_MONITOR) { + if (sc->an_monitor & AN_MONITOR_AIRONET_HEADER) { + bpfattach(ifp, DLT_AIRONET_HEADER, + sizeof(struct ether_header)); + } else { + bpfattach(ifp, DLT_IEEE802_11, + sizeof(struct ether_header)); + } + } else { + bpfattach(ifp, DLT_EN10MB, + sizeof(struct ether_header)); + if (ng_ether_attach_p != NULL) + (*ng_ether_attach_p) (ifp); + } + break; + default: + printf("an%d: unknown RID: %x\n", sc->an_unit, areq->an_type); + return; + } + + + /* Reinitialize the card. */ + if (ifp->if_flags) + an_init(sc); + + return; +} + +/* + * Derived from Linux driver to enable promiscious mode. + */ + +static void +an_promisc(sc, promisc) + struct an_softc *sc; + int promisc; +{ + if (sc->an_was_monitor) + an_reset(sc); + /* XXX: indentation bug or braces bug ? */ + if (sc->mpi350) + an_init_mpi350_desc(sc); + if (sc->an_monitor || sc->an_was_monitor) + an_init(sc); + + sc->an_was_monitor = sc->an_monitor; + an_cmd(sc, AN_CMD_SET_MODE, promisc ? 0xffff : 0); + + return; +} + +static int +an_ioctl(ifp, command, data) + struct ifnet *ifp; + u_long command; + caddr_t data; +{ + int error = 0; + int len; + int i; + struct an_softc *sc; + struct ifreq *ifr; + struct thread *td = curthread; + struct ieee80211req *ireq; + u_int8_t tmpstr[IEEE80211_NWID_LEN*2]; + u_int8_t *tmpptr; + struct an_ltv_genconfig *config; + struct an_ltv_key *key; + struct an_ltv_status *status; + struct an_ltv_ssidlist *ssids; + int mode; + struct aironet_ioctl l_ioctl; + + sc = ifp->if_softc; + AN_LOCK(sc); + ifr = (struct ifreq *)data; + ireq = (struct ieee80211req *)data; + + config = (struct an_ltv_genconfig *)&sc->areq; + key = (struct an_ltv_key *)&sc->areq; + status = (struct an_ltv_status *)&sc->areq; + ssids = (struct an_ltv_ssidlist *)&sc->areq; + + if (sc->an_gone) { + error = ENODEV; + goto out; + } + + switch (command) { + case SIOCSIFFLAGS: + if (ifp->if_flags & IFF_UP) { + if (ifp->if_flags & IFF_RUNNING && + ifp->if_flags & IFF_PROMISC && + !(sc->an_if_flags & IFF_PROMISC)) { + an_promisc(sc, 1); + } else if (ifp->if_flags & IFF_RUNNING && + !(ifp->if_flags & IFF_PROMISC) && + sc->an_if_flags & IFF_PROMISC) { + an_promisc(sc, 0); + } else + an_init(sc); + } else { + if (ifp->if_flags & IFF_RUNNING) + an_stop(sc); + } + sc->an_if_flags = ifp->if_flags; + error = 0; + break; + case SIOCSIFMEDIA: + case SIOCGIFMEDIA: + error = ifmedia_ioctl(ifp, ifr, &sc->an_ifmedia, command); + break; + case SIOCADDMULTI: + case SIOCDELMULTI: + /* The Aironet has no multicast filter. */ + error = 0; + break; + case SIOCGAIRONET: + error = copyin(ifr->ifr_data, &sc->areq, sizeof(sc->areq)); + if (error != 0) + break; +#ifdef ANCACHE + if (sc->areq.an_type == AN_RID_ZERO_CACHE) { + error = suser(td); + if (error) + break; + sc->an_sigitems = sc->an_nextitem = 0; + break; + } else if (sc->areq.an_type == AN_RID_READ_CACHE) { + char *pt = (char *)&sc->areq.an_val; + bcopy((char *)&sc->an_sigitems, (char *)pt, + sizeof(int)); + pt += sizeof(int); + sc->areq.an_len = sizeof(int) / 2; + bcopy((char *)&sc->an_sigcache, (char *)pt, + sizeof(struct an_sigcache) * sc->an_sigitems); + sc->areq.an_len += ((sizeof(struct an_sigcache) * + sc->an_sigitems) / 2) + 1; + } else +#endif + if (an_read_record(sc, (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + error = copyout(&sc->areq, ifr->ifr_data, sizeof(sc->areq)); + break; + case SIOCSAIRONET: + if ((error = suser(td))) + goto out; + error = copyin(ifr->ifr_data, &sc->areq, sizeof(sc->areq)); + if (error != 0) + break; + an_setdef(sc, &sc->areq); + break; + case SIOCGPRIVATE_0: /* used by Cisco client utility */ + if ((error = suser(td))) + goto out; + copyin(ifr->ifr_data, &l_ioctl, sizeof(l_ioctl)); + mode = l_ioctl.command; + + if (mode >= AIROGCAP && mode <= AIROGSTATSD32) { + error = readrids(ifp, &l_ioctl); + } else if (mode >= AIROPCAP && mode <= AIROPLEAPUSR) { + error = writerids(ifp, &l_ioctl); + } else if (mode >= AIROFLSHRST && mode <= AIRORESTART) { + error = flashcard(ifp, &l_ioctl); + } else { + error =-1; + } + + /* copy out the updated command info */ + copyout(&l_ioctl, ifr->ifr_data, sizeof(l_ioctl)); + + break; + case SIOCGPRIVATE_1: /* used by Cisco client utility */ + if ((error = suser(td))) + goto out; + copyin(ifr->ifr_data, &l_ioctl, sizeof(l_ioctl)); + l_ioctl.command = 0; + error = AIROMAGIC; + copyout(&error, l_ioctl.data, sizeof(error)); + error = 0; + break; + case SIOCG80211: + sc->areq.an_len = sizeof(sc->areq); + /* was that a good idea DJA we are doing a short-cut */ + switch (ireq->i_type) { + case IEEE80211_IOC_SSID: + if (ireq->i_val == -1) { + sc->areq.an_type = AN_RID_STATUS; + if (an_read_record(sc, + (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + len = status->an_ssidlen; + tmpptr = status->an_ssid; + } else if (ireq->i_val >= 0) { + sc->areq.an_type = AN_RID_SSIDLIST; + if (an_read_record(sc, + (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + if (ireq->i_val == 0) { + len = ssids->an_ssid1_len; + tmpptr = ssids->an_ssid1; + } else if (ireq->i_val == 1) { + len = ssids->an_ssid2_len; + tmpptr = ssids->an_ssid2; + } else if (ireq->i_val == 2) { + len = ssids->an_ssid3_len; + tmpptr = ssids->an_ssid3; + } else { + error = EINVAL; + break; + } + } else { + error = EINVAL; + break; + } + if (len > IEEE80211_NWID_LEN) { + error = EINVAL; + break; + } + ireq->i_len = len; + bzero(tmpstr, IEEE80211_NWID_LEN); + bcopy(tmpptr, tmpstr, len); + error = copyout(tmpstr, ireq->i_data, + IEEE80211_NWID_LEN); + break; + case IEEE80211_IOC_NUMSSIDS: + ireq->i_val = 3; + break; + case IEEE80211_IOC_WEP: + sc->areq.an_type = AN_RID_ACTUALCFG; + if (an_read_record(sc, + (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + if (config->an_authtype & AN_AUTHTYPE_PRIVACY_IN_USE) { + if (config->an_authtype & + AN_AUTHTYPE_ALLOW_UNENCRYPTED) + ireq->i_val = IEEE80211_WEP_MIXED; + else + ireq->i_val = IEEE80211_WEP_ON; + } else { + ireq->i_val = IEEE80211_WEP_OFF; + } + break; + case IEEE80211_IOC_WEPKEY: + /* + * XXX: I'm not entierly convinced this is + * correct, but it's what is implemented in + * ancontrol so it will have to do until we get + * access to actual Cisco code. + */ + if (ireq->i_val < 0 || ireq->i_val > 8) { + error = EINVAL; + break; + } + len = 0; + if (ireq->i_val < 5) { + sc->areq.an_type = AN_RID_WEP_TEMP; + for (i = 0; i < 5; i++) { + if (an_read_record(sc, + (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + if (key->kindex == 0xffff) + break; + if (key->kindex == ireq->i_val) + len = key->klen; + /* Required to get next entry */ + sc->areq.an_type = AN_RID_WEP_PERM; + } + if (error != 0) + break; + } + /* We aren't allowed to read the value of the + * key from the card so we just output zeros + * like we would if we could read the card, but + * denied the user access. + */ + bzero(tmpstr, len); + ireq->i_len = len; + error = copyout(tmpstr, ireq->i_data, len); + break; + case IEEE80211_IOC_NUMWEPKEYS: + ireq->i_val = 9; /* include home key */ + break; + case IEEE80211_IOC_WEPTXKEY: + /* + * For some strange reason, you have to read all + * keys before you can read the txkey. + */ + sc->areq.an_type = AN_RID_WEP_TEMP; + for (i = 0; i < 5; i++) { + if (an_read_record(sc, + (struct an_ltv_gen *) &sc->areq)) { + error = EINVAL; + break; + } + if (key->kindex == 0xffff) + break; + /* Required to get next entry */ + sc->areq.an_type = AN_RID_WEP_PERM; + } + if (error != 0) + break; + + sc->areq.an_type = AN_RID_WEP_PERM; + key->kindex = 0xffff; + if (an_read_record(sc, + (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + ireq->i_val = key->mac[0]; + /* + * Check for home mode. Map home mode into + * 5th key since that is how it is stored on + * the card + */ + sc->areq.an_len = sizeof(struct an_ltv_genconfig); + sc->areq.an_type = AN_RID_GENCONFIG; + if (an_read_record(sc, + (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + if (config->an_home_product & AN_HOME_NETWORK) + ireq->i_val = 4; + break; + case IEEE80211_IOC_AUTHMODE: + sc->areq.an_type = AN_RID_ACTUALCFG; + if (an_read_record(sc, + (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + if ((config->an_authtype & AN_AUTHTYPE_MASK) == + AN_AUTHTYPE_NONE) { + ireq->i_val = IEEE80211_AUTH_NONE; + } else if ((config->an_authtype & AN_AUTHTYPE_MASK) == + AN_AUTHTYPE_OPEN) { + ireq->i_val = IEEE80211_AUTH_OPEN; + } else if ((config->an_authtype & AN_AUTHTYPE_MASK) == + AN_AUTHTYPE_SHAREDKEY) { + ireq->i_val = IEEE80211_AUTH_SHARED; + } else + error = EINVAL; + break; + case IEEE80211_IOC_STATIONNAME: + sc->areq.an_type = AN_RID_ACTUALCFG; + if (an_read_record(sc, + (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + ireq->i_len = sizeof(config->an_nodename); + tmpptr = config->an_nodename; + bzero(tmpstr, IEEE80211_NWID_LEN); + bcopy(tmpptr, tmpstr, ireq->i_len); + error = copyout(tmpstr, ireq->i_data, + IEEE80211_NWID_LEN); + break; + case IEEE80211_IOC_CHANNEL: + sc->areq.an_type = AN_RID_STATUS; + if (an_read_record(sc, + (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + ireq->i_val = status->an_cur_channel; + break; + case IEEE80211_IOC_POWERSAVE: + sc->areq.an_type = AN_RID_ACTUALCFG; + if (an_read_record(sc, + (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + if (config->an_psave_mode == AN_PSAVE_NONE) { + ireq->i_val = IEEE80211_POWERSAVE_OFF; + } else if (config->an_psave_mode == AN_PSAVE_CAM) { + ireq->i_val = IEEE80211_POWERSAVE_CAM; + } else if (config->an_psave_mode == AN_PSAVE_PSP) { + ireq->i_val = IEEE80211_POWERSAVE_PSP; + } else if (config->an_psave_mode == AN_PSAVE_PSP_CAM) { + ireq->i_val = IEEE80211_POWERSAVE_PSP_CAM; + } else + error = EINVAL; + break; + case IEEE80211_IOC_POWERSAVESLEEP: + sc->areq.an_type = AN_RID_ACTUALCFG; + if (an_read_record(sc, + (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + ireq->i_val = config->an_listen_interval; + break; + } + break; + case SIOCS80211: + if ((error = suser(td))) + goto out; + sc->areq.an_len = sizeof(sc->areq); + /* + * We need a config structure for everything but the WEP + * key management and SSIDs so we get it now so avoid + * duplicating this code every time. + */ + if (ireq->i_type != IEEE80211_IOC_SSID && + ireq->i_type != IEEE80211_IOC_WEPKEY && + ireq->i_type != IEEE80211_IOC_WEPTXKEY) { + sc->areq.an_type = AN_RID_GENCONFIG; + if (an_read_record(sc, + (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + } + switch (ireq->i_type) { + case IEEE80211_IOC_SSID: + sc->areq.an_type = AN_RID_SSIDLIST; + if (an_read_record(sc, + (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + if (ireq->i_len > IEEE80211_NWID_LEN) { + error = EINVAL; + break; + } + switch (ireq->i_val) { + case 0: + error = copyin(ireq->i_data, + ssids->an_ssid1, ireq->i_len); + ssids->an_ssid1_len = ireq->i_len; + break; + case 1: + error = copyin(ireq->i_data, + ssids->an_ssid2, ireq->i_len); + ssids->an_ssid2_len = ireq->i_len; + break; + case 2: + error = copyin(ireq->i_data, + ssids->an_ssid3, ireq->i_len); + ssids->an_ssid3_len = ireq->i_len; + break; + default: + error = EINVAL; + break; + } + break; + case IEEE80211_IOC_WEP: + switch (ireq->i_val) { + case IEEE80211_WEP_OFF: + config->an_authtype &= + ~(AN_AUTHTYPE_PRIVACY_IN_USE | + AN_AUTHTYPE_ALLOW_UNENCRYPTED); + break; + case IEEE80211_WEP_ON: + config->an_authtype |= + AN_AUTHTYPE_PRIVACY_IN_USE; + config->an_authtype &= + ~AN_AUTHTYPE_ALLOW_UNENCRYPTED; + break; + case IEEE80211_WEP_MIXED: + config->an_authtype |= + AN_AUTHTYPE_PRIVACY_IN_USE | + AN_AUTHTYPE_ALLOW_UNENCRYPTED; + break; + default: + error = EINVAL; + break; + } + break; + case IEEE80211_IOC_WEPKEY: + if (ireq->i_val < 0 || ireq->i_val > 8 || + ireq->i_len > 13) { + error = EINVAL; + break; + } + error = copyin(ireq->i_data, tmpstr, 13); + if (error != 0) + break; + /* + * Map the 9th key into the home mode + * since that is how it is stored on + * the card + */ + bzero(&sc->areq, sizeof(struct an_ltv_key)); + sc->areq.an_len = sizeof(struct an_ltv_key); + key->mac[0] = 1; /* The others are 0. */ + if (ireq->i_val < 4) { + sc->areq.an_type = AN_RID_WEP_TEMP; + key->kindex = ireq->i_val; + } else { + sc->areq.an_type = AN_RID_WEP_PERM; + key->kindex = ireq->i_val - 4; + } + key->klen = ireq->i_len; + bcopy(tmpstr, key->key, key->klen); + break; + case IEEE80211_IOC_WEPTXKEY: + if (ireq->i_val < 0 || ireq->i_val > 4) { + error = EINVAL; + break; + } + + /* + * Map the 5th key into the home mode + * since that is how it is stored on + * the card + */ + sc->areq.an_len = sizeof(struct an_ltv_genconfig); + sc->areq.an_type = AN_RID_ACTUALCFG; + if (an_read_record(sc, + (struct an_ltv_gen *)&sc->areq)) { + error = EINVAL; + break; + } + if (ireq->i_val == 4) { + config->an_home_product |= AN_HOME_NETWORK; + ireq->i_val = 0; + } else { + config->an_home_product &= ~AN_HOME_NETWORK; + } + + sc->an_config.an_home_product + = config->an_home_product; + + /* update configuration */ + an_init(sc); + + bzero(&sc->areq, sizeof(struct an_ltv_key)); + sc->areq.an_len = sizeof(struct an_ltv_key); + sc->areq.an_type = AN_RID_WEP_PERM; + key->kindex = 0xffff; + key->mac[0] = ireq->i_val; + break; + case IEEE80211_IOC_AUTHMODE: + switch (ireq->i_val) { + case IEEE80211_AUTH_NONE: + config->an_authtype = AN_AUTHTYPE_NONE | + (config->an_authtype & ~AN_AUTHTYPE_MASK); + break; + case IEEE80211_AUTH_OPEN: + config->an_authtype = AN_AUTHTYPE_OPEN | + (config->an_authtype & ~AN_AUTHTYPE_MASK); + break; + case IEEE80211_AUTH_SHARED: + config->an_authtype = AN_AUTHTYPE_SHAREDKEY | + (config->an_authtype & ~AN_AUTHTYPE_MASK); + break; + default: + error = EINVAL; + } + break; + case IEEE80211_IOC_STATIONNAME: + if (ireq->i_len > 16) { + error = EINVAL; + break; + } + bzero(config->an_nodename, 16); + error = copyin(ireq->i_data, + config->an_nodename, ireq->i_len); + break; + case IEEE80211_IOC_CHANNEL: + /* + * The actual range is 1-14, but if you set it + * to 0 you get the default so we let that work + * too. + */ + if (ireq->i_val < 0 || ireq->i_val >14) { + error = EINVAL; + break; + } + config->an_ds_channel = ireq->i_val; + break; + case IEEE80211_IOC_POWERSAVE: + switch (ireq->i_val) { + case IEEE80211_POWERSAVE_OFF: + config->an_psave_mode = AN_PSAVE_NONE; + break; + case IEEE80211_POWERSAVE_CAM: + config->an_psave_mode = AN_PSAVE_CAM; + break; + case IEEE80211_POWERSAVE_PSP: + config->an_psave_mode = AN_PSAVE_PSP; + break; + case IEEE80211_POWERSAVE_PSP_CAM: + config->an_psave_mode = AN_PSAVE_PSP_CAM; + break; + default: + error = EINVAL; + break; + } + break; + case IEEE80211_IOC_POWERSAVESLEEP: + config->an_listen_interval = ireq->i_val; + break; + } + + if (!error) + an_setdef(sc, &sc->areq); + break; + default: + error = ether_ioctl(ifp, command, data); + break; + } +out: + AN_UNLOCK(sc); + + return(error != 0); +} + +static int +an_init_tx_ring(sc) + struct an_softc *sc; +{ + int i; + int id; + + if (sc->an_gone) + return (0); + + if (!sc->mpi350) { + for (i = 0; i < AN_TX_RING_CNT; i++) { + if (an_alloc_nicmem(sc, 1518 + + 0x44, &id)) + return(ENOMEM); + sc->an_rdata.an_tx_fids[i] = id; + sc->an_rdata.an_tx_ring[i] = 0; + } + } + + sc->an_rdata.an_tx_prod = 0; + sc->an_rdata.an_tx_cons = 0; + sc->an_rdata.an_tx_empty = 1; + + return(0); +} + +static void +an_init(xsc) + void *xsc; +{ + struct an_softc *sc = xsc; + struct ifnet *ifp = &sc->arpcom.ac_if; + + AN_LOCK(sc); + + if (sc->an_gone) { + AN_UNLOCK(sc); + return; + } + + if (ifp->if_flags & IFF_RUNNING) + an_stop(sc); + + sc->an_associated = 0; + + /* Allocate the TX buffers */ + if (an_init_tx_ring(sc)) { + an_reset(sc); + if (sc->mpi350) + an_init_mpi350_desc(sc); + if (an_init_tx_ring(sc)) { + printf("an%d: tx buffer allocation " + "failed\n", sc->an_unit); + AN_UNLOCK(sc); + return; + } + } + + /* Set our MAC address. */ + bcopy((char *)&sc->arpcom.ac_enaddr, + (char *)&sc->an_config.an_macaddr, ETHER_ADDR_LEN); + + if (ifp->if_flags & IFF_BROADCAST) + sc->an_config.an_rxmode = AN_RXMODE_BC_ADDR; + else + sc->an_config.an_rxmode = AN_RXMODE_ADDR; + + if (ifp->if_flags & IFF_MULTICAST) + sc->an_config.an_rxmode = AN_RXMODE_BC_MC_ADDR; + + if (ifp->if_flags & IFF_PROMISC) { + if (sc->an_monitor & AN_MONITOR) { + if (sc->an_monitor & AN_MONITOR_ANY_BSS) { + sc->an_config.an_rxmode |= + AN_RXMODE_80211_MONITOR_ANYBSS | + AN_RXMODE_NO_8023_HEADER; + } else { + sc->an_config.an_rxmode |= + AN_RXMODE_80211_MONITOR_CURBSS | + AN_RXMODE_NO_8023_HEADER; + } + } + } + + if (sc->an_have_rssimap) + sc->an_config.an_rxmode |= AN_RXMODE_NORMALIZED_RSSI; + + /* Set the ssid list */ + sc->an_ssidlist.an_type = AN_RID_SSIDLIST; + sc->an_ssidlist.an_len = sizeof(struct an_ltv_ssidlist); + if (an_write_record(sc, (struct an_ltv_gen *)&sc->an_ssidlist)) { + printf("an%d: failed to set ssid list\n", sc->an_unit); + AN_UNLOCK(sc); + return; + } + + /* Set the AP list */ + sc->an_aplist.an_type = AN_RID_APLIST; + sc->an_aplist.an_len = sizeof(struct an_ltv_aplist); + if (an_write_record(sc, (struct an_ltv_gen *)&sc->an_aplist)) { + printf("an%d: failed to set AP list\n", sc->an_unit); + AN_UNLOCK(sc); + return; + } + + /* Set the configuration in the NIC */ + sc->an_config.an_len = sizeof(struct an_ltv_genconfig); + sc->an_config.an_type = AN_RID_GENCONFIG; + if (an_write_record(sc, (struct an_ltv_gen *)&sc->an_config)) { + printf("an%d: failed to set configuration\n", sc->an_unit); + AN_UNLOCK(sc); + return; + } + + /* Enable the MAC */ + if (an_cmd(sc, AN_CMD_ENABLE, 0)) { + printf("an%d: failed to enable MAC\n", sc->an_unit); + AN_UNLOCK(sc); + return; + } + + if (ifp->if_flags & IFF_PROMISC) + an_cmd(sc, AN_CMD_SET_MODE, 0xffff); + + /* enable interrupts */ + CSR_WRITE_2(sc, AN_INT_EN(sc->mpi350), AN_INTRS); + + ifp->if_flags |= IFF_RUNNING; + ifp->if_flags &= ~IFF_OACTIVE; + + sc->an_stat_ch = timeout(an_stats_update, sc, hz); + AN_UNLOCK(sc); + + return; +} + +static void +an_start(ifp) + struct ifnet *ifp; +{ + struct an_softc *sc; + struct mbuf *m0 = NULL; + struct an_txframe_802_3 tx_frame_802_3; + struct ether_header *eh; + int id, idx, i; + unsigned char txcontrol; + struct an_card_tx_desc an_tx_desc; + u_int8_t *ptr; + u_int8_t *buf; + + sc = ifp->if_softc; + + if (sc->an_gone) + return; + + if (ifp->if_flags & IFF_OACTIVE) + return; + + if (!sc->an_associated) + return; + + /* We can't send in monitor mode so toss any attempts. */ + if (sc->an_monitor && (ifp->if_flags & IFF_PROMISC)) { + for (;;) { + IF_DEQUEUE(&ifp->if_snd, m0); + if (m0 == NULL) + break; + m_freem(m0); + } + return; + } + + idx = sc->an_rdata.an_tx_prod; + + if (!sc->mpi350) { + bzero((char *)&tx_frame_802_3, sizeof(tx_frame_802_3)); + + while (sc->an_rdata.an_tx_ring[idx] == 0) { + IF_DEQUEUE(&ifp->if_snd, m0); + if (m0 == NULL) + break; + + id = sc->an_rdata.an_tx_fids[idx]; + eh = mtod(m0, struct ether_header *); + + bcopy((char *)&eh->ether_dhost, + (char *)&tx_frame_802_3.an_tx_dst_addr, + ETHER_ADDR_LEN); + bcopy((char *)&eh->ether_shost, + (char *)&tx_frame_802_3.an_tx_src_addr, + ETHER_ADDR_LEN); + + /* minus src/dest mac & type */ + tx_frame_802_3.an_tx_802_3_payload_len = + m0->m_pkthdr.len - 12; + + m_copydata(m0, sizeof(struct ether_header) - 2 , + tx_frame_802_3.an_tx_802_3_payload_len, + (caddr_t)&sc->an_txbuf); + + txcontrol = AN_TXCTL_8023; + /* write the txcontrol only */ + an_write_data(sc, id, 0x08, (caddr_t)&txcontrol, + sizeof(txcontrol)); + + /* 802_3 header */ + an_write_data(sc, id, 0x34, (caddr_t)&tx_frame_802_3, + sizeof(struct an_txframe_802_3)); + + /* in mbuf header type is just before payload */ + an_write_data(sc, id, 0x44, (caddr_t)&sc->an_txbuf, + tx_frame_802_3.an_tx_802_3_payload_len); + + /* + * If there's a BPF listner, bounce a copy of + * this frame to him. + */ + BPF_MTAP(ifp, m0); + + m_freem(m0); + m0 = NULL; + + sc->an_rdata.an_tx_ring[idx] = id; + if (an_cmd(sc, AN_CMD_TX, id)) + printf("an%d: xmit failed\n", sc->an_unit); + + AN_INC(idx, AN_TX_RING_CNT); + } + } else { /* MPI-350 */ + while (sc->an_rdata.an_tx_empty || + idx != sc->an_rdata.an_tx_cons) { + IF_DEQUEUE(&ifp->if_snd, m0); + if (m0 == NULL) { + break; + } + buf = sc->an_tx_buffer[idx].an_dma_vaddr; + + eh = mtod(m0, struct ether_header *); + + /* DJA optimize this to limit bcopy */ + bcopy((char *)&eh->ether_dhost, + (char *)&tx_frame_802_3.an_tx_dst_addr, + ETHER_ADDR_LEN); + bcopy((char *)&eh->ether_shost, + (char *)&tx_frame_802_3.an_tx_src_addr, + ETHER_ADDR_LEN); + + /* minus src/dest mac & type */ + tx_frame_802_3.an_tx_802_3_payload_len = + m0->m_pkthdr.len - 12; + + m_copydata(m0, sizeof(struct ether_header) - 2 , + tx_frame_802_3.an_tx_802_3_payload_len, + (caddr_t)&sc->an_txbuf); + + txcontrol = AN_TXCTL_8023; + /* write the txcontrol only */ + bcopy((caddr_t)&txcontrol, &buf[0x08], + sizeof(txcontrol)); + + /* 802_3 header */ + bcopy((caddr_t)&tx_frame_802_3, &buf[0x34], + sizeof(struct an_txframe_802_3)); + + /* in mbuf header type is just before payload */ + bcopy((caddr_t)&sc->an_txbuf, &buf[0x44], + tx_frame_802_3.an_tx_802_3_payload_len); + + + bzero(&an_tx_desc, sizeof(an_tx_desc)); + an_tx_desc.an_offset = 0; + an_tx_desc.an_eoc = 1; + an_tx_desc.an_valid = 1; + an_tx_desc.an_len = 0x44 + + tx_frame_802_3.an_tx_802_3_payload_len; + an_tx_desc.an_phys = sc->an_tx_buffer[idx].an_dma_paddr; + ptr = (u_int8_t*)&an_tx_desc; + for (i = 0; i < sizeof(an_tx_desc); i++) { + CSR_MEM_AUX_WRITE_1(sc, AN_TX_DESC_OFFSET + i, + ptr[i]); + } + + /* + * If there's a BPF listner, bounce a copy of + * this frame to him. + */ + BPF_MTAP(ifp, m0); + + m_freem(m0); + m0 = NULL; + + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_ALLOC); + + AN_INC(idx, AN_MAX_TX_DESC); + sc->an_rdata.an_tx_empty = 0; + } + } + + if (m0 != NULL) + ifp->if_flags |= IFF_OACTIVE; + + sc->an_rdata.an_tx_prod = idx; + + /* + * Set a timeout in case the chip goes out to lunch. + */ + ifp->if_timer = 5; + + return; +} + +void +an_stop(sc) + struct an_softc *sc; +{ + struct ifnet *ifp; + int i; + + AN_LOCK(sc); + + if (sc->an_gone) { + AN_UNLOCK(sc); + return; + } + + ifp = &sc->arpcom.ac_if; + + an_cmd(sc, AN_CMD_FORCE_SYNCLOSS, 0); + CSR_WRITE_2(sc, AN_INT_EN(sc->mpi350), 0); + an_cmd(sc, AN_CMD_DISABLE, 0); + + for (i = 0; i < AN_TX_RING_CNT; i++) + an_cmd(sc, AN_CMD_DEALLOC_MEM, sc->an_rdata.an_tx_fids[i]); + + untimeout(an_stats_update, sc, sc->an_stat_ch); + + ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE); + + if (sc->an_flash_buffer) { + free(sc->an_flash_buffer, M_DEVBUF); + sc->an_flash_buffer = NULL; + } + + AN_UNLOCK(sc); + + return; +} + +static void +an_watchdog(ifp) + struct ifnet *ifp; +{ + struct an_softc *sc; + + sc = ifp->if_softc; + AN_LOCK(sc); + + if (sc->an_gone) { + AN_UNLOCK(sc); + return; + } + + printf("an%d: device timeout\n", sc->an_unit); + + an_reset(sc); + if (sc->mpi350) + an_init_mpi350_desc(sc); + an_init(sc); + + ifp->if_oerrors++; + AN_UNLOCK(sc); + + return; +} + +void +an_shutdown(dev) + device_t dev; +{ + struct an_softc *sc; + + sc = device_get_softc(dev); + an_stop(sc); + sc->an_gone = 1; + + return; +} + +void +an_resume(dev) + device_t dev; +{ + struct an_softc *sc; + struct ifnet *ifp; + int i; + + sc = device_get_softc(dev); + AN_LOCK(sc); + ifp = &sc->arpcom.ac_if; + + sc->an_gone = 0; + an_reset(sc); + if (sc->mpi350) + an_init_mpi350_desc(sc); + an_init(sc); + + /* Recovery temporary keys */ + for (i = 0; i < 4; i++) { + sc->areq.an_type = AN_RID_WEP_TEMP; + sc->areq.an_len = sizeof(struct an_ltv_key); + bcopy(&sc->an_temp_keys[i], + &sc->areq, sizeof(struct an_ltv_key)); + an_setdef(sc, &sc->areq); + } + + if (ifp->if_flags & IFF_UP) + an_start(ifp); + AN_UNLOCK(sc); + + return; +} + +#ifdef ANCACHE +/* Aironet signal strength cache code. + * store signal/noise/quality on per MAC src basis in + * a small fixed cache. The cache wraps if > MAX slots + * used. The cache may be zeroed out to start over. + * Two simple filters exist to reduce computation: + * 1. ip only (literally 0x800, ETHERTYPE_IP) which may be used + * to ignore some packets. It defaults to ip only. + * it could be used to focus on broadcast, non-IP 802.11 beacons. + * 2. multicast/broadcast only. This may be used to + * ignore unicast packets and only cache signal strength + * for multicast/broadcast packets (beacons); e.g., Mobile-IP + * beacons and not unicast traffic. + * + * The cache stores (MAC src(index), IP src (major clue), signal, + * quality, noise) + * + * No apologies for storing IP src here. It's easy and saves much + * trouble elsewhere. The cache is assumed to be INET dependent, + * although it need not be. + * + * Note: the Aironet only has a single byte of signal strength value + * in the rx frame header, and it's not scaled to anything sensible. + * This is kind of lame, but it's all we've got. + */ + +#ifdef documentation + +int an_sigitems; /* number of cached entries */ +struct an_sigcache an_sigcache[MAXANCACHE]; /* array of cache entries */ +int an_nextitem; /* index/# of entries */ + + +#endif + +/* control variables for cache filtering. Basic idea is + * to reduce cost (e.g., to only Mobile-IP agent beacons + * which are broadcast or multicast). Still you might + * want to measure signal strength anth unicast ping packets + * on a pt. to pt. ant. setup. + */ +/* set true if you want to limit cache items to broadcast/mcast + * only packets (not unicast). Useful for mobile-ip beacons which + * are broadcast/multicast at network layer. Default is all packets + * so ping/unicast anll work say anth pt. to pt. antennae setup. + */ +static int an_cache_mcastonly = 0; +SYSCTL_INT(_hw_an, OID_AUTO, an_cache_mcastonly, CTLFLAG_RW, + &an_cache_mcastonly, 0, ""); + +/* set true if you want to limit cache items to IP packets only +*/ +static int an_cache_iponly = 1; +SYSCTL_INT(_hw_an, OID_AUTO, an_cache_iponly, CTLFLAG_RW, + &an_cache_iponly, 0, ""); + +/* + * an_cache_store, per rx packet store signal + * strength in MAC (src) indexed cache. + */ +static void +an_cache_store (sc, eh, m, rx_rssi, rx_quality) + struct an_softc *sc; + struct ether_header *eh; + struct mbuf *m; + u_int8_t rx_rssi; + u_int8_t rx_quality; +{ + struct ip *ip = 0; + int i; + static int cache_slot = 0; /* use this cache entry */ + static int wrapindex = 0; /* next "free" cache entry */ + int type_ipv4 = 0; + + /* filters: + * 1. ip only + * 2. configurable filter to throw out unicast packets, + * keep multicast only. + */ + + if ((ntohs(eh->ether_type) == ETHERTYPE_IP)) { + type_ipv4 = 1; + } + + /* filter for ip packets only + */ + if ( an_cache_iponly && !type_ipv4) { + return; + } + + /* filter for broadcast/multicast only + */ + if (an_cache_mcastonly && ((eh->ether_dhost[0] & 1) == 0)) { + return; + } + +#ifdef SIGDEBUG + printf("an: q value %x (MSB=0x%x, LSB=0x%x) \n", + rx_rssi & 0xffff, rx_rssi >> 8, rx_rssi & 0xff); +#endif + + /* find the ip header. we want to store the ip_src + * address. + */ + if (type_ipv4) { + ip = mtod(m, struct ip *); + } + + /* do a linear search for a matching MAC address + * in the cache table + * . MAC address is 6 bytes, + * . var w_nextitem holds total number of entries already cached + */ + for (i = 0; i < sc->an_nextitem; i++) { + if (! bcmp(eh->ether_shost , sc->an_sigcache[i].macsrc, 6 )) { + /* Match!, + * so we already have this entry, + * update the data + */ + break; + } + } + + /* did we find a matching mac address? + * if yes, then overwrite a previously existing cache entry + */ + if (i < sc->an_nextitem ) { + cache_slot = i; + } + /* else, have a new address entry,so + * add this new entry, + * if table full, then we need to replace LRU entry + */ + else { + + /* check for space in cache table + * note: an_nextitem also holds number of entries + * added in the cache table + */ + if ( sc->an_nextitem < MAXANCACHE ) { + cache_slot = sc->an_nextitem; + sc->an_nextitem++; + sc->an_sigitems = sc->an_nextitem; + } + /* no space found, so simply wrap anth wrap index + * and "zap" the next entry + */ + else { + if (wrapindex == MAXANCACHE) { + wrapindex = 0; + } + cache_slot = wrapindex++; + } + } + + /* invariant: cache_slot now points at some slot + * in cache. + */ + if (cache_slot < 0 || cache_slot >= MAXANCACHE) { + log(LOG_ERR, "an_cache_store, bad index: %d of " + "[0..%d], gross cache error\n", + cache_slot, MAXANCACHE); + return; + } + + /* store items in cache + * .ip source address + * .mac src + * .signal, etc. + */ + if (type_ipv4) { + sc->an_sigcache[cache_slot].ipsrc = ip->ip_src.s_addr; + } + bcopy( eh->ether_shost, sc->an_sigcache[cache_slot].macsrc, 6); + + + switch (an_cache_mode) { + case DBM: + if (sc->an_have_rssimap) { + sc->an_sigcache[cache_slot].signal = + - sc->an_rssimap.an_entries[rx_rssi].an_rss_dbm; + sc->an_sigcache[cache_slot].quality = + - sc->an_rssimap.an_entries[rx_quality].an_rss_dbm; + } else { + sc->an_sigcache[cache_slot].signal = rx_rssi - 100; + sc->an_sigcache[cache_slot].quality = rx_quality - 100; + } + break; + case PERCENT: + if (sc->an_have_rssimap) { + sc->an_sigcache[cache_slot].signal = + sc->an_rssimap.an_entries[rx_rssi].an_rss_pct; + sc->an_sigcache[cache_slot].quality = + sc->an_rssimap.an_entries[rx_quality].an_rss_pct; + } else { + if (rx_rssi > 100) + rx_rssi = 100; + if (rx_quality > 100) + rx_quality = 100; + sc->an_sigcache[cache_slot].signal = rx_rssi; + sc->an_sigcache[cache_slot].quality = rx_quality; + } + break; + case RAW: + sc->an_sigcache[cache_slot].signal = rx_rssi; + sc->an_sigcache[cache_slot].quality = rx_quality; + break; + } + + sc->an_sigcache[cache_slot].noise = 0; + + return; +} +#endif + +static int +an_media_change(ifp) + struct ifnet *ifp; +{ + struct an_softc *sc = ifp->if_softc; + struct an_ltv_genconfig *cfg; + int otype = sc->an_config.an_opmode; + int orate = sc->an_tx_rate; + + if ((sc->an_ifmedia.ifm_cur->ifm_media & IFM_IEEE80211_ADHOC) != 0) + sc->an_config.an_opmode = AN_OPMODE_IBSS_ADHOC; + else + sc->an_config.an_opmode = AN_OPMODE_INFRASTRUCTURE_STATION; + + sc->an_tx_rate = + ieee80211_media2rate( + IFM_SUBTYPE(sc->an_ifmedia.ifm_cur->ifm_media), + IEEE80211_T_DS); + + if (orate != sc->an_tx_rate) { + /* Read the current configuration */ + sc->an_config.an_type = AN_RID_GENCONFIG; + sc->an_config.an_len = sizeof(struct an_ltv_genconfig); + an_read_record(sc, (struct an_ltv_gen *)&sc->an_config); + cfg = &sc->an_config; + + /* clear other rates and set the only one we want */ + bzero(cfg->an_rates, sizeof(cfg->an_rates)); + cfg->an_rates[0] = sc->an_tx_rate; + + /* Save the new rate */ + sc->an_config.an_type = AN_RID_GENCONFIG; + sc->an_config.an_len = sizeof(struct an_ltv_genconfig); + } + + if (otype != sc->an_config.an_opmode || + orate != sc->an_tx_rate) + an_init(sc); + + return(0); +} + +static void +an_media_status(ifp, imr) + struct ifnet *ifp; + struct ifmediareq *imr; +{ + struct an_ltv_status status; + struct an_softc *sc = ifp->if_softc; + + imr->ifm_active = IFM_IEEE80211; + + status.an_len = sizeof(status); + status.an_type = AN_RID_STATUS; + if (an_read_record(sc, (struct an_ltv_gen *)&status)) { + /* If the status read fails, just lie. */ + imr->ifm_active = sc->an_ifmedia.ifm_cur->ifm_media; + imr->ifm_status = IFM_AVALID|IFM_ACTIVE; + } + + if (sc->an_tx_rate == 0) { + imr->ifm_active = IFM_IEEE80211|IFM_AUTO; + } + + if (sc->an_config.an_opmode == AN_OPMODE_IBSS_ADHOC) + imr->ifm_active |= IFM_IEEE80211_ADHOC; + imr->ifm_active |= ieee80211_rate2media(status.an_current_tx_rate, + IEEE80211_T_DS); + imr->ifm_status = IFM_AVALID; + if (status.an_opmode & AN_STATUS_OPMODE_ASSOCIATED) + imr->ifm_status |= IFM_ACTIVE; +} + +/********************** Cisco utility support routines *************/ + +/* + * ReadRids & WriteRids derived from Cisco driver additions to Ben Reed's + * Linux driver + */ + +static int +readrids(ifp, l_ioctl) + struct ifnet *ifp; + struct aironet_ioctl *l_ioctl; +{ + unsigned short rid; + struct an_softc *sc; + + switch (l_ioctl->command) { + case AIROGCAP: + rid = AN_RID_CAPABILITIES; + break; + case AIROGCFG: + rid = AN_RID_GENCONFIG; + break; + case AIROGSLIST: + rid = AN_RID_SSIDLIST; + break; + case AIROGVLIST: + rid = AN_RID_APLIST; + break; + case AIROGDRVNAM: + rid = AN_RID_DRVNAME; + break; + case AIROGEHTENC: + rid = AN_RID_ENCAPPROTO; + break; + case AIROGWEPKTMP: + rid = AN_RID_WEP_TEMP; + break; + case AIROGWEPKNV: + rid = AN_RID_WEP_PERM; + break; + case AIROGSTAT: + rid = AN_RID_STATUS; + break; + case AIROGSTATSD32: + rid = AN_RID_32BITS_DELTA; + break; + case AIROGSTATSC32: + rid = AN_RID_32BITS_CUM; + break; + default: + rid = 999; + break; + } + + if (rid == 999) /* Is bad command */ + return -EINVAL; + + sc = ifp->if_softc; + sc->areq.an_len = AN_MAX_DATALEN; + sc->areq.an_type = rid; + + an_read_record(sc, (struct an_ltv_gen *)&sc->areq); + + l_ioctl->len = sc->areq.an_len - 4; /* just data */ + + /* the data contains the length at first */ + if (copyout(&(sc->areq.an_len), l_ioctl->data, + sizeof(sc->areq.an_len))) { + return -EFAULT; + } + /* Just copy the data back */ + if (copyout(&(sc->areq.an_val), l_ioctl->data + 2, + l_ioctl->len)) { + return -EFAULT; + } + return 0; +} + +static int +writerids(ifp, l_ioctl) + struct ifnet *ifp; + struct aironet_ioctl *l_ioctl; +{ + struct an_softc *sc; + int rid, command; + + sc = ifp->if_softc; + rid = 0; + command = l_ioctl->command; + + switch (command) { + case AIROPSIDS: + rid = AN_RID_SSIDLIST; + break; + case AIROPCAP: + rid = AN_RID_CAPABILITIES; + break; + case AIROPAPLIST: + rid = AN_RID_APLIST; + break; + case AIROPCFG: + rid = AN_RID_GENCONFIG; + break; + case AIROPMACON: + an_cmd(sc, AN_CMD_ENABLE, 0); + return 0; + break; + case AIROPMACOFF: + an_cmd(sc, AN_CMD_DISABLE, 0); + return 0; + break; + case AIROPSTCLR: + /* + * This command merely clears the counts does not actually + * store any data only reads rid. But as it changes the cards + * state, I put it in the writerid routines. + */ + + rid = AN_RID_32BITS_DELTACLR; + sc = ifp->if_softc; + sc->areq.an_len = AN_MAX_DATALEN; + sc->areq.an_type = rid; + + an_read_record(sc, (struct an_ltv_gen *)&sc->areq); + l_ioctl->len = sc->areq.an_len - 4; /* just data */ + + /* the data contains the length at first */ + if (copyout(&(sc->areq.an_len), l_ioctl->data, + sizeof(sc->areq.an_len))) { + return -EFAULT; + } + /* Just copy the data */ + if (copyout(&(sc->areq.an_val), l_ioctl->data + 2, + l_ioctl->len)) { + return -EFAULT; + } + return 0; + break; + case AIROPWEPKEY: + rid = AN_RID_WEP_TEMP; + break; + case AIROPWEPKEYNV: + rid = AN_RID_WEP_PERM; + break; + case AIROPLEAPUSR: + rid = AN_RID_LEAPUSERNAME; + break; + case AIROPLEAPPWD: + rid = AN_RID_LEAPPASSWORD; + break; + default: + return -EOPNOTSUPP; + } + + if (rid) { + if (l_ioctl->len > sizeof(sc->areq.an_val) + 4) + return -EINVAL; + sc->areq.an_len = l_ioctl->len + 4; /* add type & length */ + sc->areq.an_type = rid; + + /* Just copy the data back */ + copyin((l_ioctl->data) + 2, &sc->areq.an_val, + l_ioctl->len); + + an_cmd(sc, AN_CMD_DISABLE, 0); + an_write_record(sc, (struct an_ltv_gen *)&sc->areq); + an_cmd(sc, AN_CMD_ENABLE, 0); + return 0; + } + return -EOPNOTSUPP; +} + +/* + * General Flash utilities derived from Cisco driver additions to Ben Reed's + * Linux driver + */ + +#define FLASH_DELAY(x) tsleep(ifp, PZERO, "flash", ((x) / hz) + 1); +#define FLASH_COMMAND 0x7e7e +#define FLASH_SIZE 32 * 1024 + +static int +unstickbusy(ifp) + struct ifnet *ifp; +{ + struct an_softc *sc = ifp->if_softc; + + if (CSR_READ_2(sc, AN_COMMAND(sc->mpi350)) & AN_CMD_BUSY) { + CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), + AN_EV_CLR_STUCK_BUSY); + return 1; + } + return 0; +} + +/* + * Wait for busy completion from card wait for delay uSec's Return true for + * success meaning command reg is clear + */ + +static int +WaitBusy(ifp, uSec) + struct ifnet *ifp; + int uSec; +{ + int statword = 0xffff; + int delay = 0; + struct an_softc *sc = ifp->if_softc; + + while ((statword & AN_CMD_BUSY) && delay <= (1000 * 100)) { + FLASH_DELAY(10); + delay += 10; + statword = CSR_READ_2(sc, AN_COMMAND(sc->mpi350)); + + if ((AN_CMD_BUSY & statword) && (delay % 200)) { + unstickbusy(ifp); + } + } + + return 0 == (AN_CMD_BUSY & statword); +} + +/* + * STEP 1) Disable MAC and do soft reset on card. + */ + +static int +cmdreset(ifp) + struct ifnet *ifp; +{ + int status; + struct an_softc *sc = ifp->if_softc; + + an_stop(sc); + + an_cmd(sc, AN_CMD_DISABLE, 0); + + if (!(status = WaitBusy(ifp, AN_TIMEOUT))) { + printf("an%d: Waitbusy hang b4 RESET =%d\n", + sc->an_unit, status); + return -EBUSY; + } + CSR_WRITE_2(sc, AN_COMMAND(sc->mpi350), AN_CMD_FW_RESTART); + + FLASH_DELAY(1000); /* WAS 600 12/7/00 */ + + + if (!(status = WaitBusy(ifp, 100))) { + printf("an%d: Waitbusy hang AFTER RESET =%d\n", + sc->an_unit, status); + return -EBUSY; + } + return 0; +} + +/* + * STEP 2) Put the card in legendary flash mode + */ + +static int +setflashmode(ifp) + struct ifnet *ifp; +{ + int status; + struct an_softc *sc = ifp->if_softc; + + CSR_WRITE_2(sc, AN_SW0(sc->mpi350), FLASH_COMMAND); + CSR_WRITE_2(sc, AN_SW1(sc->mpi350), FLASH_COMMAND); + CSR_WRITE_2(sc, AN_SW0(sc->mpi350), FLASH_COMMAND); + CSR_WRITE_2(sc, AN_COMMAND(sc->mpi350), FLASH_COMMAND); + + /* + * mdelay(500); // 500ms delay + */ + + FLASH_DELAY(500); + + if (!(status = WaitBusy(ifp, AN_TIMEOUT))) { + printf("Waitbusy hang after setflash mode\n"); + return -EIO; + } + return 0; +} + +/* + * Get a character from the card matching matchbyte Step 3) + */ + +static int +flashgchar(ifp, matchbyte, dwelltime) + struct ifnet *ifp; + int matchbyte; + int dwelltime; +{ + int rchar; + unsigned char rbyte = 0; + int success = -1; + struct an_softc *sc = ifp->if_softc; + + + do { + rchar = CSR_READ_2(sc, AN_SW1(sc->mpi350)); + + if (dwelltime && !(0x8000 & rchar)) { + dwelltime -= 10; + FLASH_DELAY(10); + continue; + } + rbyte = 0xff & rchar; + + if ((rbyte == matchbyte) && (0x8000 & rchar)) { + CSR_WRITE_2(sc, AN_SW1(sc->mpi350), 0); + success = 1; + break; + } + if (rbyte == 0x81 || rbyte == 0x82 || rbyte == 0x83 || rbyte == 0x1a || 0xffff == rchar) + break; + CSR_WRITE_2(sc, AN_SW1(sc->mpi350), 0); + + } while (dwelltime > 0); + return success; +} + +/* + * Put character to SWS0 wait for dwelltime x 50us for echo . + */ + +static int +flashpchar(ifp, byte, dwelltime) + struct ifnet *ifp; + int byte; + int dwelltime; +{ + int echo; + int pollbusy, waittime; + struct an_softc *sc = ifp->if_softc; + + byte |= 0x8000; + + if (dwelltime == 0) + dwelltime = 200; + + waittime = dwelltime; + + /* + * Wait for busy bit d15 to go false indicating buffer empty + */ + do { + pollbusy = CSR_READ_2(sc, AN_SW0(sc->mpi350)); + + if (pollbusy & 0x8000) { + FLASH_DELAY(50); + waittime -= 50; + continue; + } else + break; + } + while (waittime >= 0); + + /* timeout for busy clear wait */ + + if (waittime <= 0) { + printf("an%d: flash putchar busywait timeout! \n", + sc->an_unit); + return -1; + } + /* + * Port is clear now write byte and wait for it to echo back + */ + do { + CSR_WRITE_2(sc, AN_SW0(sc->mpi350), byte); + FLASH_DELAY(50); + dwelltime -= 50; + echo = CSR_READ_2(sc, AN_SW1(sc->mpi350)); + } while (dwelltime >= 0 && echo != byte); + + + CSR_WRITE_2(sc, AN_SW1(sc->mpi350), 0); + + return echo == byte; +} + +/* + * Transfer 32k of firmware data from user buffer to our buffer and send to + * the card + */ + +static int +flashputbuf(ifp) + struct ifnet *ifp; +{ + unsigned short *bufp; + int nwords; + struct an_softc *sc = ifp->if_softc; + + /* Write stuff */ + + bufp = sc->an_flash_buffer; + + if (!sc->mpi350) { + CSR_WRITE_2(sc, AN_AUX_PAGE, 0x100); + CSR_WRITE_2(sc, AN_AUX_OFFSET, 0); + + for (nwords = 0; nwords != FLASH_SIZE / 2; nwords++) { + CSR_WRITE_2(sc, AN_AUX_DATA, bufp[nwords] & 0xffff); + } + } else { + for (nwords = 0; nwords != FLASH_SIZE / 4; nwords++) { + CSR_MEM_AUX_WRITE_4(sc, 0x8000, + ((u_int32_t *)bufp)[nwords] & 0xffff); + } + } + + CSR_WRITE_2(sc, AN_SW0(sc->mpi350), 0x8000); + + return 0; +} + +/* + * After flashing restart the card. + */ + +static int +flashrestart(ifp) + struct ifnet *ifp; +{ + int status = 0; + struct an_softc *sc = ifp->if_softc; + + FLASH_DELAY(1024); /* Added 12/7/00 */ + + an_init(sc); + + FLASH_DELAY(1024); /* Added 12/7/00 */ + return status; +} + +/* + * Entry point for flash ioclt. + */ + +static int +flashcard(ifp, l_ioctl) + struct ifnet *ifp; + struct aironet_ioctl *l_ioctl; +{ + int z = 0, status; + struct an_softc *sc; + + sc = ifp->if_softc; + if (sc->mpi350) { + printf("an%d: flashing not supported on MPI 350 yet\n", + sc->an_unit); + return(-1); + } + status = l_ioctl->command; + + switch (l_ioctl->command) { + case AIROFLSHRST: + return cmdreset(ifp); + break; + case AIROFLSHSTFL: + if (sc->an_flash_buffer) { + free(sc->an_flash_buffer, M_DEVBUF); + sc->an_flash_buffer = NULL; + } + sc->an_flash_buffer = malloc(FLASH_SIZE, M_DEVBUF, M_WAITOK); + if (sc->an_flash_buffer) + return setflashmode(ifp); + else + return ENOBUFS; + break; + case AIROFLSHGCHR: /* Get char from aux */ + copyin(l_ioctl->data, &sc->areq, l_ioctl->len); + z = *(int *)&sc->areq; + if ((status = flashgchar(ifp, z, 8000)) == 1) + return 0; + else + return -1; + break; + case AIROFLSHPCHR: /* Send char to card. */ + copyin(l_ioctl->data, &sc->areq, l_ioctl->len); + z = *(int *)&sc->areq; + if ((status = flashpchar(ifp, z, 8000)) == -1) + return -EIO; + else + return 0; + break; + case AIROFLPUTBUF: /* Send 32k to card */ + if (l_ioctl->len > FLASH_SIZE) { + printf("an%d: Buffer to big, %x %x\n", sc->an_unit, + l_ioctl->len, FLASH_SIZE); + return -EINVAL; + } + copyin(l_ioctl->data, sc->an_flash_buffer, l_ioctl->len); + + if ((status = flashputbuf(ifp)) != 0) + return -EIO; + else + return 0; + break; + case AIRORESTART: + if ((status = flashrestart(ifp)) != 0) { + printf("an%d: FLASHRESTART returned %d\n", + sc->an_unit, status); + return -EIO; + } else + return 0; + + break; + default: + return -EINVAL; + } + + return -EINVAL; +} |