summaryrefslogtreecommitdiffstats
path: root/sys/dev/aic7xxx/aic79xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'sys/dev/aic7xxx/aic79xx.c')
-rw-r--r--sys/dev/aic7xxx/aic79xx.c20
1 files changed, 10 insertions, 10 deletions
diff --git a/sys/dev/aic7xxx/aic79xx.c b/sys/dev/aic7xxx/aic79xx.c
index c403c09..347d8ef 100644
--- a/sys/dev/aic7xxx/aic79xx.c
+++ b/sys/dev/aic7xxx/aic79xx.c
@@ -1209,7 +1209,7 @@ ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat)
* that requires host assistance for completion.
* While handling the message phase(s), we will be
* notified by the sequencer after each byte is
- * transfered so we can track bus phase changes.
+ * transferred so we can track bus phase changes.
*
* If this is the first time we've seen a HOST_MSG_LOOP
* interrupt, initialize the state of the host message
@@ -1623,7 +1623,7 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat)
/*
* Although the driver does not care about the
* 'Selection in Progress' status bit, the busy
- * LED does. SELINGO is only cleared by a sucessfull
+ * LED does. SELINGO is only cleared by a successful
* selection, so we must manually clear it to insure
* the LED turns off just incase no future successful
* selections occur (e.g. no devices on the bus).
@@ -2699,7 +2699,7 @@ ahd_clear_critical_section(struct ahd_softc *ahd)
ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP);
ahd_outb(ahd, SIMODE1, simode1);
/*
- * SCSIINT seems to glitch occassionally when
+ * SCSIINT seems to glitch occasionally when
* the interrupt masks are restored. Clear SCSIINT
* one more time so that only persistent errors
* are seen as a real interrupt.
@@ -3029,7 +3029,7 @@ ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo,
/*
* Update the bitmask of targets for which the controller should
- * negotiate with at the next convenient oportunity. This currently
+ * negotiate with at the next convenient opportunity. This currently
* means the next time we send the initial identify messages for
* a new transaction.
*/
@@ -3380,7 +3380,7 @@ ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
/*
* During packetized transfers, the target will
- * give us the oportunity to send command packets
+ * give us the opportunity to send command packets
* without us asserting attention.
*/
if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
@@ -4845,7 +4845,7 @@ ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
/*
* Requeue all tagged commands for this target
- * currently in our posession so they can be
+ * currently in our possession so they can be
* converted to untagged commands.
*/
ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
@@ -5498,7 +5498,7 @@ ahd_shutdown(void *arg)
/*
* Reset the controller and record some information about it
* that is only available just after a reset. If "reinit" is
- * non-zero, this reset occured after initial configuration
+ * non-zero, this reset occurred after initial configuration
* and the caller requests that the chip be fully reinitialized
* to a runable state. Chip interrupts are *not* enabled after
* a reinitialization. The caller must enable interrupts via
@@ -5751,7 +5751,7 @@ ahd_init_scbdata(struct ahd_softc *ahd)
}
/*
- * Note that we were successfull
+ * Note that we were successful
*/
return (0);
@@ -8794,7 +8794,7 @@ ahd_check_patch(struct ahd_softc *ahd, struct patch **start_patch,
cur_patch += cur_patch->skip_patch;
} else {
/* Accepted this patch. Advance to the next
- * one and wait for our intruction pointer to
+ * one and wait for our instruction pointer to
* hit this point.
*/
cur_patch++;
@@ -9673,7 +9673,7 @@ ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf,
return (error);
/*
- * Write the data. If we don't get throught the loop at
+ * Write the data. If we don't get through the loop at
* least once, the arguments were invalid.
*/
retval = EINVAL;
OpenPOWER on IntegriCloud