diff options
Diffstat (limited to 'sys/contrib/opensolaris/uts/common/fs/zfs/sys/dmu.h')
-rw-r--r-- | sys/contrib/opensolaris/uts/common/fs/zfs/sys/dmu.h | 586 |
1 files changed, 586 insertions, 0 deletions
diff --git a/sys/contrib/opensolaris/uts/common/fs/zfs/sys/dmu.h b/sys/contrib/opensolaris/uts/common/fs/zfs/sys/dmu.h new file mode 100644 index 0000000..f534015 --- /dev/null +++ b/sys/contrib/opensolaris/uts/common/fs/zfs/sys/dmu.h @@ -0,0 +1,586 @@ +/* + * CDDL HEADER START + * + * The contents of this file are subject to the terms of the + * Common Development and Distribution License (the "License"). + * You may not use this file except in compliance with the License. + * + * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE + * or http://www.opensolaris.org/os/licensing. + * See the License for the specific language governing permissions + * and limitations under the License. + * + * When distributing Covered Code, include this CDDL HEADER in each + * file and include the License file at usr/src/OPENSOLARIS.LICENSE. + * If applicable, add the following below this CDDL HEADER, with the + * fields enclosed by brackets "[]" replaced with your own identifying + * information: Portions Copyright [yyyy] [name of copyright owner] + * + * CDDL HEADER END + */ +/* + * Copyright 2007 Sun Microsystems, Inc. All rights reserved. + * Use is subject to license terms. + */ + +#ifndef _SYS_DMU_H +#define _SYS_DMU_H + +#pragma ident "%Z%%M% %I% %E% SMI" + +/* + * This file describes the interface that the DMU provides for its + * consumers. + * + * The DMU also interacts with the SPA. That interface is described in + * dmu_spa.h. + */ + +#include <sys/types.h> +#include <sys/param.h> + +#ifdef __cplusplus +extern "C" { +#endif + +struct uio; +struct page; +struct vnode; +struct spa; +struct zilog; +struct zio; +struct blkptr; +struct zap_cursor; +struct dsl_dataset; +struct dsl_pool; +struct dnode; +struct drr_begin; +struct drr_end; +struct zbookmark; +struct spa; +struct nvlist; +struct objset_impl; +struct file; + +typedef struct objset objset_t; +typedef struct dmu_tx dmu_tx_t; +typedef struct dsl_dir dsl_dir_t; + +typedef enum dmu_object_type { + DMU_OT_NONE, + /* general: */ + DMU_OT_OBJECT_DIRECTORY, /* ZAP */ + DMU_OT_OBJECT_ARRAY, /* UINT64 */ + DMU_OT_PACKED_NVLIST, /* UINT8 (XDR by nvlist_pack/unpack) */ + DMU_OT_PACKED_NVLIST_SIZE, /* UINT64 */ + DMU_OT_BPLIST, /* UINT64 */ + DMU_OT_BPLIST_HDR, /* UINT64 */ + /* spa: */ + DMU_OT_SPACE_MAP_HEADER, /* UINT64 */ + DMU_OT_SPACE_MAP, /* UINT64 */ + /* zil: */ + DMU_OT_INTENT_LOG, /* UINT64 */ + /* dmu: */ + DMU_OT_DNODE, /* DNODE */ + DMU_OT_OBJSET, /* OBJSET */ + /* dsl: */ + DMU_OT_DSL_DIR, /* UINT64 */ + DMU_OT_DSL_DIR_CHILD_MAP, /* ZAP */ + DMU_OT_DSL_DS_SNAP_MAP, /* ZAP */ + DMU_OT_DSL_PROPS, /* ZAP */ + DMU_OT_DSL_DATASET, /* UINT64 */ + /* zpl: */ + DMU_OT_ZNODE, /* ZNODE */ + DMU_OT_ACL, /* ACL */ + DMU_OT_PLAIN_FILE_CONTENTS, /* UINT8 */ + DMU_OT_DIRECTORY_CONTENTS, /* ZAP */ + DMU_OT_MASTER_NODE, /* ZAP */ + DMU_OT_UNLINKED_SET, /* ZAP */ + /* zvol: */ + DMU_OT_ZVOL, /* UINT8 */ + DMU_OT_ZVOL_PROP, /* ZAP */ + /* other; for testing only! */ + DMU_OT_PLAIN_OTHER, /* UINT8 */ + DMU_OT_UINT64_OTHER, /* UINT64 */ + DMU_OT_ZAP_OTHER, /* ZAP */ + /* new object types: */ + DMU_OT_ERROR_LOG, /* ZAP */ + DMU_OT_SPA_HISTORY, /* UINT8 */ + DMU_OT_SPA_HISTORY_OFFSETS, /* spa_his_phys_t */ + DMU_OT_POOL_PROPS, /* ZAP */ + + DMU_OT_NUMTYPES +} dmu_object_type_t; + +typedef enum dmu_objset_type { + DMU_OST_NONE, + DMU_OST_META, + DMU_OST_ZFS, + DMU_OST_ZVOL, + DMU_OST_OTHER, /* For testing only! */ + DMU_OST_ANY, /* Be careful! */ + DMU_OST_NUMTYPES +} dmu_objset_type_t; + +void byteswap_uint64_array(void *buf, size_t size); +void byteswap_uint32_array(void *buf, size_t size); +void byteswap_uint16_array(void *buf, size_t size); +void byteswap_uint8_array(void *buf, size_t size); +void zap_byteswap(void *buf, size_t size); +void zfs_acl_byteswap(void *buf, size_t size); +void zfs_znode_byteswap(void *buf, size_t size); + +#define DS_MODE_NONE 0 /* invalid, to aid debugging */ +#define DS_MODE_STANDARD 1 /* normal access, no special needs */ +#define DS_MODE_PRIMARY 2 /* the "main" access, e.g. a mount */ +#define DS_MODE_EXCLUSIVE 3 /* exclusive access, e.g. to destroy */ +#define DS_MODE_LEVELS 4 +#define DS_MODE_LEVEL(x) ((x) & (DS_MODE_LEVELS - 1)) +#define DS_MODE_READONLY 0x8 +#define DS_MODE_IS_READONLY(x) ((x) & DS_MODE_READONLY) +#define DS_MODE_INCONSISTENT 0x10 +#define DS_MODE_IS_INCONSISTENT(x) ((x) & DS_MODE_INCONSISTENT) + +#define DS_FIND_SNAPSHOTS (1<<0) +#define DS_FIND_CHILDREN (1<<1) + +/* + * The maximum number of bytes that can be accessed as part of one + * operation, including metadata. + */ +#define DMU_MAX_ACCESS (10<<20) /* 10MB */ + +/* + * Public routines to create, destroy, open, and close objsets. + */ +int dmu_objset_open(const char *name, dmu_objset_type_t type, int mode, + objset_t **osp); +void dmu_objset_close(objset_t *os); +int dmu_objset_evict_dbufs(objset_t *os, int try); +int dmu_objset_create(const char *name, dmu_objset_type_t type, + objset_t *clone_parent, + void (*func)(objset_t *os, void *arg, dmu_tx_t *tx), void *arg); +int dmu_objset_destroy(const char *name); +int dmu_snapshots_destroy(char *fsname, char *snapname); +int dmu_objset_rollback(const char *name); +int dmu_objset_snapshot(char *fsname, char *snapname, boolean_t recursive); +int dmu_objset_rename(const char *name, const char *newname); +int dmu_objset_find(char *name, int func(char *, void *), void *arg, + int flags); +void dmu_objset_byteswap(void *buf, size_t size); + +typedef struct dmu_buf { + uint64_t db_object; /* object that this buffer is part of */ + uint64_t db_offset; /* byte offset in this object */ + uint64_t db_size; /* size of buffer in bytes */ + void *db_data; /* data in buffer */ +} dmu_buf_t; + +typedef void dmu_buf_evict_func_t(struct dmu_buf *db, void *user_ptr); + +/* + * Callback function to perform byte swapping on a block. + */ +typedef void dmu_byteswap_func_t(void *buf, size_t size); + +/* + * The names of zap entries in the DIRECTORY_OBJECT of the MOS. + */ +#define DMU_POOL_DIRECTORY_OBJECT 1 +#define DMU_POOL_CONFIG "config" +#define DMU_POOL_ROOT_DATASET "root_dataset" +#define DMU_POOL_SYNC_BPLIST "sync_bplist" +#define DMU_POOL_ERRLOG_SCRUB "errlog_scrub" +#define DMU_POOL_ERRLOG_LAST "errlog_last" +#define DMU_POOL_SPARES "spares" +#define DMU_POOL_DEFLATE "deflate" +#define DMU_POOL_HISTORY "history" +#define DMU_POOL_PROPS "pool_props" + +/* + * Allocate an object from this objset. The range of object numbers + * available is (0, DN_MAX_OBJECT). Object 0 is the meta-dnode. + * + * The transaction must be assigned to a txg. The newly allocated + * object will be "held" in the transaction (ie. you can modify the + * newly allocated object in this transaction). + * + * dmu_object_alloc() chooses an object and returns it in *objectp. + * + * dmu_object_claim() allocates a specific object number. If that + * number is already allocated, it fails and returns EEXIST. + * + * Return 0 on success, or ENOSPC or EEXIST as specified above. + */ +uint64_t dmu_object_alloc(objset_t *os, dmu_object_type_t ot, + int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); +int dmu_object_claim(objset_t *os, uint64_t object, dmu_object_type_t ot, + int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); +int dmu_object_reclaim(objset_t *os, uint64_t object, dmu_object_type_t ot, + int blocksize, dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); + +/* + * Free an object from this objset. + * + * The object's data will be freed as well (ie. you don't need to call + * dmu_free(object, 0, -1, tx)). + * + * The object need not be held in the transaction. + * + * If there are any holds on this object's buffers (via dmu_buf_hold()), + * or tx holds on the object (via dmu_tx_hold_object()), you can not + * free it; it fails and returns EBUSY. + * + * If the object is not allocated, it fails and returns ENOENT. + * + * Return 0 on success, or EBUSY or ENOENT as specified above. + */ +int dmu_object_free(objset_t *os, uint64_t object, dmu_tx_t *tx); + +/* + * Find the next allocated or free object. + * + * The objectp parameter is in-out. It will be updated to be the next + * object which is allocated. Ignore objects which have not been + * modified since txg. + * + * XXX Can only be called on a objset with no dirty data. + * + * Returns 0 on success, or ENOENT if there are no more objects. + */ +int dmu_object_next(objset_t *os, uint64_t *objectp, + boolean_t hole, uint64_t txg); + +/* + * Set the data blocksize for an object. + * + * The object cannot have any blocks allcated beyond the first. If + * the first block is allocated already, the new size must be greater + * than the current block size. If these conditions are not met, + * ENOTSUP will be returned. + * + * Returns 0 on success, or EBUSY if there are any holds on the object + * contents, or ENOTSUP as described above. + */ +int dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size, + int ibs, dmu_tx_t *tx); + +/* + * Set the checksum property on a dnode. The new checksum algorithm will + * apply to all newly written blocks; existing blocks will not be affected. + */ +void dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum, + dmu_tx_t *tx); + +/* + * Set the compress property on a dnode. The new compression algorithm will + * apply to all newly written blocks; existing blocks will not be affected. + */ +void dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress, + dmu_tx_t *tx); + +/* + * Decide how many copies of a given block we should make. Can be from + * 1 to SPA_DVAS_PER_BP. + */ +int dmu_get_replication_level(struct objset_impl *, struct zbookmark *zb, + dmu_object_type_t ot); +/* + * The bonus data is accessed more or less like a regular buffer. + * You must dmu_bonus_hold() to get the buffer, which will give you a + * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus + * data. As with any normal buffer, you must call dmu_buf_read() to + * read db_data, dmu_buf_will_dirty() before modifying it, and the + * object must be held in an assigned transaction before calling + * dmu_buf_will_dirty. You may use dmu_buf_set_user() on the bonus + * buffer as well. You must release your hold with dmu_buf_rele(). + */ +int dmu_bonus_hold(objset_t *os, uint64_t object, void *tag, dmu_buf_t **); +int dmu_bonus_max(void); + +/* + * Obtain the DMU buffer from the specified object which contains the + * specified offset. dmu_buf_hold() puts a "hold" on the buffer, so + * that it will remain in memory. You must release the hold with + * dmu_buf_rele(). You musn't access the dmu_buf_t after releasing your + * hold. You must have a hold on any dmu_buf_t* you pass to the DMU. + * + * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill + * on the returned buffer before reading or writing the buffer's + * db_data. The comments for those routines describe what particular + * operations are valid after calling them. + * + * The object number must be a valid, allocated object number. + */ +int dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset, + void *tag, dmu_buf_t **); +void dmu_buf_add_ref(dmu_buf_t *db, void* tag); +void dmu_buf_rele(dmu_buf_t *db, void *tag); +uint64_t dmu_buf_refcount(dmu_buf_t *db); + +/* + * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a + * range of an object. A pointer to an array of dmu_buf_t*'s is + * returned (in *dbpp). + * + * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and + * frees the array. The hold on the array of buffers MUST be released + * with dmu_buf_rele_array. You can NOT release the hold on each buffer + * individually with dmu_buf_rele. + */ +int dmu_buf_hold_array_by_bonus(dmu_buf_t *db, uint64_t offset, + uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp); +void dmu_buf_rele_array(dmu_buf_t **, int numbufs, void *tag); + +/* + * Returns NULL on success, or the existing user ptr if it's already + * been set. + * + * user_ptr is for use by the user and can be obtained via dmu_buf_get_user(). + * + * user_data_ptr_ptr should be NULL, or a pointer to a pointer which + * will be set to db->db_data when you are allowed to access it. Note + * that db->db_data (the pointer) can change when you do dmu_buf_read(), + * dmu_buf_tryupgrade(), dmu_buf_will_dirty(), or dmu_buf_will_fill(). + * *user_data_ptr_ptr will be set to the new value when it changes. + * + * If non-NULL, pageout func will be called when this buffer is being + * excised from the cache, so that you can clean up the data structure + * pointed to by user_ptr. + * + * dmu_evict_user() will call the pageout func for all buffers in a + * objset with a given pageout func. + */ +void *dmu_buf_set_user(dmu_buf_t *db, void *user_ptr, void *user_data_ptr_ptr, + dmu_buf_evict_func_t *pageout_func); +/* + * set_user_ie is the same as set_user, but request immediate eviction + * when hold count goes to zero. + */ +void *dmu_buf_set_user_ie(dmu_buf_t *db, void *user_ptr, + void *user_data_ptr_ptr, dmu_buf_evict_func_t *pageout_func); +void *dmu_buf_update_user(dmu_buf_t *db_fake, void *old_user_ptr, + void *user_ptr, void *user_data_ptr_ptr, + dmu_buf_evict_func_t *pageout_func); +void dmu_evict_user(objset_t *os, dmu_buf_evict_func_t *func); + +/* + * Returns the user_ptr set with dmu_buf_set_user(), or NULL if not set. + */ +void *dmu_buf_get_user(dmu_buf_t *db); + +/* + * Indicate that you are going to modify the buffer's data (db_data). + * + * The transaction (tx) must be assigned to a txg (ie. you've called + * dmu_tx_assign()). The buffer's object must be held in the tx + * (ie. you've called dmu_tx_hold_object(tx, db->db_object)). + */ +void dmu_buf_will_dirty(dmu_buf_t *db, dmu_tx_t *tx); + +/* + * You must create a transaction, then hold the objects which you will + * (or might) modify as part of this transaction. Then you must assign + * the transaction to a transaction group. Once the transaction has + * been assigned, you can modify buffers which belong to held objects as + * part of this transaction. You can't modify buffers before the + * transaction has been assigned; you can't modify buffers which don't + * belong to objects which this transaction holds; you can't hold + * objects once the transaction has been assigned. You may hold an + * object which you are going to free (with dmu_object_free()), but you + * don't have to. + * + * You can abort the transaction before it has been assigned. + * + * Note that you may hold buffers (with dmu_buf_hold) at any time, + * regardless of transaction state. + */ + +#define DMU_NEW_OBJECT (-1ULL) +#define DMU_OBJECT_END (-1ULL) + +dmu_tx_t *dmu_tx_create(objset_t *os); +void dmu_tx_hold_write(dmu_tx_t *tx, uint64_t object, uint64_t off, int len); +void dmu_tx_hold_free(dmu_tx_t *tx, uint64_t object, uint64_t off, + uint64_t len); +void dmu_tx_hold_zap(dmu_tx_t *tx, uint64_t object, int add, char *name); +void dmu_tx_hold_bonus(dmu_tx_t *tx, uint64_t object); +void dmu_tx_abort(dmu_tx_t *tx); +int dmu_tx_assign(dmu_tx_t *tx, uint64_t txg_how); +void dmu_tx_wait(dmu_tx_t *tx); +void dmu_tx_commit(dmu_tx_t *tx); + +/* + * Free up the data blocks for a defined range of a file. If size is + * zero, the range from offset to end-of-file is freed. + */ +int dmu_free_range(objset_t *os, uint64_t object, uint64_t offset, + uint64_t size, dmu_tx_t *tx); + +/* + * Convenience functions. + * + * Canfail routines will return 0 on success, or an errno if there is a + * nonrecoverable I/O error. + */ +int dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, + void *buf); +void dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, + const void *buf, dmu_tx_t *tx); +int dmu_read_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size); +int dmu_write_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size, + dmu_tx_t *tx); +int dmu_write_pages(objset_t *os, uint64_t object, uint64_t offset, + uint64_t size, struct page *pp, dmu_tx_t *tx); + +extern int zfs_prefetch_disable; + +/* + * Asynchronously try to read in the data. + */ +void dmu_prefetch(objset_t *os, uint64_t object, uint64_t offset, + uint64_t len); + +typedef struct dmu_object_info { + /* All sizes are in bytes. */ + uint32_t doi_data_block_size; + uint32_t doi_metadata_block_size; + uint64_t doi_bonus_size; + dmu_object_type_t doi_type; + dmu_object_type_t doi_bonus_type; + uint8_t doi_indirection; /* 2 = dnode->indirect->data */ + uint8_t doi_checksum; + uint8_t doi_compress; + uint8_t doi_pad[5]; + /* Values below are number of 512-byte blocks. */ + uint64_t doi_physical_blks; /* data + metadata */ + uint64_t doi_max_block_offset; +} dmu_object_info_t; + +typedef struct dmu_object_type_info { + dmu_byteswap_func_t *ot_byteswap; + boolean_t ot_metadata; + char *ot_name; +} dmu_object_type_info_t; + +extern const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES]; + +/* + * Get information on a DMU object. + * + * Return 0 on success or ENOENT if object is not allocated. + * + * If doi is NULL, just indicates whether the object exists. + */ +int dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi); +void dmu_object_info_from_dnode(struct dnode *dn, dmu_object_info_t *doi); +void dmu_object_info_from_db(dmu_buf_t *db, dmu_object_info_t *doi); +void dmu_object_size_from_db(dmu_buf_t *db, uint32_t *blksize, + u_longlong_t *nblk512); + +typedef struct dmu_objset_stats { + uint64_t dds_num_clones; /* number of clones of this */ + uint64_t dds_creation_txg; + dmu_objset_type_t dds_type; + uint8_t dds_is_snapshot; + uint8_t dds_inconsistent; + char dds_clone_of[MAXNAMELEN]; +} dmu_objset_stats_t; + +/* + * Get stats on a dataset. + */ +void dmu_objset_fast_stat(objset_t *os, dmu_objset_stats_t *stat); + +/* + * Add entries to the nvlist for all the objset's properties. See + * zfs_prop_table[] and zfs(1m) for details on the properties. + */ +void dmu_objset_stats(objset_t *os, struct nvlist *nv); + +/* + * Get the space usage statistics for statvfs(). + * + * refdbytes is the amount of space "referenced" by this objset. + * availbytes is the amount of space available to this objset, taking + * into account quotas & reservations, assuming that no other objsets + * use the space first. These values correspond to the 'referenced' and + * 'available' properties, described in the zfs(1m) manpage. + * + * usedobjs and availobjs are the number of objects currently allocated, + * and available. + */ +void dmu_objset_space(objset_t *os, uint64_t *refdbytesp, uint64_t *availbytesp, + uint64_t *usedobjsp, uint64_t *availobjsp); + +/* + * The fsid_guid is a 56-bit ID that can change to avoid collisions. + * (Contrast with the ds_guid which is a 64-bit ID that will never + * change, so there is a small probability that it will collide.) + */ +uint64_t dmu_objset_fsid_guid(objset_t *os); + +int dmu_objset_is_snapshot(objset_t *os); + +extern struct spa *dmu_objset_spa(objset_t *os); +extern struct zilog *dmu_objset_zil(objset_t *os); +extern struct dsl_pool *dmu_objset_pool(objset_t *os); +extern struct dsl_dataset *dmu_objset_ds(objset_t *os); +extern void dmu_objset_name(objset_t *os, char *buf); +extern dmu_objset_type_t dmu_objset_type(objset_t *os); +extern uint64_t dmu_objset_id(objset_t *os); +extern int dmu_snapshot_list_next(objset_t *os, int namelen, char *name, + uint64_t *id, uint64_t *offp); +extern int dmu_dir_list_next(objset_t *os, int namelen, char *name, + uint64_t *idp, uint64_t *offp); + +/* + * Return the txg number for the given assigned transaction. + */ +uint64_t dmu_tx_get_txg(dmu_tx_t *tx); + +/* + * Synchronous write. + * If a parent zio is provided this function initiates a write on the + * provided buffer as a child of the parent zio. + * In the absense of a parent zio, the write is completed synchronously. + * At write completion, blk is filled with the bp of the written block. + * Note that while the data covered by this function will be on stable + * storage when the write completes this new data does not become a + * permanent part of the file until the associated transaction commits. + */ +typedef void dmu_sync_cb_t(dmu_buf_t *db, void *arg); +int dmu_sync(struct zio *zio, dmu_buf_t *db, + struct blkptr *bp, uint64_t txg, dmu_sync_cb_t *done, void *arg); + +/* + * Find the next hole or data block in file starting at *off + * Return found offset in *off. Return ESRCH for end of file. + */ +int dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole, + uint64_t *off); + +/* + * Initial setup and final teardown. + */ +extern void dmu_init(void); +extern void dmu_fini(void); + +typedef void (*dmu_traverse_cb_t)(objset_t *os, void *arg, struct blkptr *bp, + uint64_t object, uint64_t offset, int len); +void dmu_traverse_objset(objset_t *os, uint64_t txg_start, + dmu_traverse_cb_t cb, void *arg); + +int dmu_sendbackup(objset_t *tosnap, objset_t *fromsnap, struct file *fp); +int dmu_recvbackup(char *tosnap, struct drr_begin *drrb, uint64_t *sizep, + boolean_t force, struct file *fp, uint64_t voffset); + +/* CRC64 table */ +#define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */ +extern uint64_t zfs_crc64_table[256]; + +#ifdef __cplusplus +} +#endif + +#endif /* _SYS_DMU_H */ |