diff options
Diffstat (limited to 'sys/contrib/octeon-sdk/cvmx-usbcx-defs.h')
-rw-r--r-- | sys/contrib/octeon-sdk/cvmx-usbcx-defs.h | 4359 |
1 files changed, 4359 insertions, 0 deletions
diff --git a/sys/contrib/octeon-sdk/cvmx-usbcx-defs.h b/sys/contrib/octeon-sdk/cvmx-usbcx-defs.h new file mode 100644 index 0000000..03dd07d --- /dev/null +++ b/sys/contrib/octeon-sdk/cvmx-usbcx-defs.h @@ -0,0 +1,4359 @@ +/***********************license start*************** + * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights + * reserved. + * + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + + * * Neither the name of Cavium Networks nor the names of + * its contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + + * This Software, including technical data, may be subject to U.S. export control + * laws, including the U.S. Export Administration Act and its associated + * regulations, and may be subject to export or import regulations in other + * countries. + + * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" + * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR + * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO + * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR + * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM + * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE, + * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF + * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR + * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR + * PERFORMANCE OF THE SOFTWARE LIES WITH YOU. + ***********************license end**************************************/ + + +/** + * cvmx-usbcx-defs.h + * + * Configuration and status register (CSR) type definitions for + * Octeon usbcx. + * + * This file is auto generated. Do not edit. + * + * <hr>$Revision$<hr> + * + */ +#ifndef __CVMX_USBCX_TYPEDEFS_H__ +#define __CVMX_USBCX_TYPEDEFS_H__ + +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DAINT(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_DAINT(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000818ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_DAINT(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000818ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DAINTMSK(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_DAINTMSK(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F001000081Cull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_DAINTMSK(block_id) (CVMX_ADD_IO_SEG(0x00016F001000081Cull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DCFG(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_DCFG(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000800ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_DCFG(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000800ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DCTL(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_DCTL(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000804ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_DCTL(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000804ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DIEPCTLX(unsigned long offset, unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && (((offset <= 4)) && ((block_id <= 1)))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && (((offset <= 4)) && ((block_id == 0)))))) + cvmx_warn("CVMX_USBCX_DIEPCTLX(%lu,%lu) is invalid on this chip\n", offset, block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000900ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32; +} +#else +#define CVMX_USBCX_DIEPCTLX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000900ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DIEPINTX(unsigned long offset, unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && (((offset <= 4)) && ((block_id <= 1)))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && (((offset <= 4)) && ((block_id == 0)))))) + cvmx_warn("CVMX_USBCX_DIEPINTX(%lu,%lu) is invalid on this chip\n", offset, block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000908ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32; +} +#else +#define CVMX_USBCX_DIEPINTX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000908ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DIEPMSK(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_DIEPMSK(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000810ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_DIEPMSK(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000810ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DIEPTSIZX(unsigned long offset, unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && (((offset <= 4)) && ((block_id <= 1)))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && (((offset <= 4)) && ((block_id == 0)))))) + cvmx_warn("CVMX_USBCX_DIEPTSIZX(%lu,%lu) is invalid on this chip\n", offset, block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000910ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32; +} +#else +#define CVMX_USBCX_DIEPTSIZX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000910ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DOEPCTLX(unsigned long offset, unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && (((offset <= 4)) && ((block_id <= 1)))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && (((offset <= 4)) && ((block_id == 0)))))) + cvmx_warn("CVMX_USBCX_DOEPCTLX(%lu,%lu) is invalid on this chip\n", offset, block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000B00ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32; +} +#else +#define CVMX_USBCX_DOEPCTLX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000B00ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DOEPINTX(unsigned long offset, unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && (((offset <= 4)) && ((block_id <= 1)))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && (((offset <= 4)) && ((block_id == 0)))))) + cvmx_warn("CVMX_USBCX_DOEPINTX(%lu,%lu) is invalid on this chip\n", offset, block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000B08ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32; +} +#else +#define CVMX_USBCX_DOEPINTX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000B08ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DOEPMSK(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_DOEPMSK(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000814ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_DOEPMSK(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000814ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DOEPTSIZX(unsigned long offset, unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && (((offset <= 4)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && (((offset <= 4)) && ((block_id <= 1)))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && (((offset <= 4)) && ((block_id == 0)))))) + cvmx_warn("CVMX_USBCX_DOEPTSIZX(%lu,%lu) is invalid on this chip\n", offset, block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000B10ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32; +} +#else +#define CVMX_USBCX_DOEPTSIZX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000B10ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DPTXFSIZX(unsigned long offset, unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((((offset >= 1) && (offset <= 4))) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((((offset >= 1) && (offset <= 4))) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((((offset >= 1) && (offset <= 4))) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((((offset >= 1) && (offset <= 4))) && ((block_id <= 1)))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((((offset >= 1) && (offset <= 4))) && ((block_id == 0)))))) + cvmx_warn("CVMX_USBCX_DPTXFSIZX(%lu,%lu) is invalid on this chip\n", offset, block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000100ull) + (((offset) & 7) + ((block_id) & 1) * 0x40000000000ull) * 4; +} +#else +#define CVMX_USBCX_DPTXFSIZX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000100ull) + (((offset) & 7) + ((block_id) & 1) * 0x40000000000ull) * 4) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DSTS(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_DSTS(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000808ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_DSTS(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000808ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DTKNQR1(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_DTKNQR1(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000820ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_DTKNQR1(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000820ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DTKNQR2(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_DTKNQR2(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000824ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_DTKNQR2(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000824ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DTKNQR3(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_DTKNQR3(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000830ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_DTKNQR3(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000830ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_DTKNQR4(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_DTKNQR4(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000834ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_DTKNQR4(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000834ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GAHBCFG(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GAHBCFG(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000008ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GAHBCFG(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000008ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GHWCFG1(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GHWCFG1(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000044ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GHWCFG1(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000044ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GHWCFG2(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GHWCFG2(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000048ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GHWCFG2(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000048ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GHWCFG3(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GHWCFG3(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F001000004Cull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GHWCFG3(block_id) (CVMX_ADD_IO_SEG(0x00016F001000004Cull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GHWCFG4(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GHWCFG4(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000050ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GHWCFG4(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000050ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GINTMSK(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GINTMSK(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000018ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GINTMSK(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000018ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GINTSTS(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GINTSTS(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000014ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GINTSTS(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000014ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GNPTXFSIZ(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GNPTXFSIZ(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000028ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GNPTXFSIZ(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000028ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GNPTXSTS(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GNPTXSTS(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F001000002Cull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GNPTXSTS(block_id) (CVMX_ADD_IO_SEG(0x00016F001000002Cull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GOTGCTL(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GOTGCTL(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000000ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GOTGCTL(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000000ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GOTGINT(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GOTGINT(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000004ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GOTGINT(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000004ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GRSTCTL(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GRSTCTL(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000010ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GRSTCTL(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000010ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GRXFSIZ(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GRXFSIZ(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000024ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GRXFSIZ(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000024ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GRXSTSPD(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GRXSTSPD(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010040020ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GRXSTSPD(block_id) (CVMX_ADD_IO_SEG(0x00016F0010040020ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GRXSTSPH(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GRXSTSPH(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000020ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GRXSTSPH(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000020ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GRXSTSRD(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GRXSTSRD(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F001004001Cull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GRXSTSRD(block_id) (CVMX_ADD_IO_SEG(0x00016F001004001Cull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GRXSTSRH(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GRXSTSRH(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F001000001Cull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GRXSTSRH(block_id) (CVMX_ADD_IO_SEG(0x00016F001000001Cull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GSNPSID(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GSNPSID(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000040ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GSNPSID(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000040ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_GUSBCFG(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_GUSBCFG(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F001000000Cull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_GUSBCFG(block_id) (CVMX_ADD_IO_SEG(0x00016F001000000Cull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_HAINT(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_HAINT(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000414ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_HAINT(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000414ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_HAINTMSK(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_HAINTMSK(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000418ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_HAINTMSK(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000418ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_HCCHARX(unsigned long offset, unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && (((offset <= 7)) && ((block_id <= 1)))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && (((offset <= 7)) && ((block_id == 0)))))) + cvmx_warn("CVMX_USBCX_HCCHARX(%lu,%lu) is invalid on this chip\n", offset, block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000500ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32; +} +#else +#define CVMX_USBCX_HCCHARX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000500ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_HCFG(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_HCFG(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000400ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_HCFG(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000400ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_HCINTMSKX(unsigned long offset, unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && (((offset <= 7)) && ((block_id <= 1)))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && (((offset <= 7)) && ((block_id == 0)))))) + cvmx_warn("CVMX_USBCX_HCINTMSKX(%lu,%lu) is invalid on this chip\n", offset, block_id); + return CVMX_ADD_IO_SEG(0x00016F001000050Cull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32; +} +#else +#define CVMX_USBCX_HCINTMSKX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F001000050Cull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_HCINTX(unsigned long offset, unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && (((offset <= 7)) && ((block_id <= 1)))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && (((offset <= 7)) && ((block_id == 0)))))) + cvmx_warn("CVMX_USBCX_HCINTX(%lu,%lu) is invalid on this chip\n", offset, block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000508ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32; +} +#else +#define CVMX_USBCX_HCINTX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000508ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_HCSPLTX(unsigned long offset, unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && (((offset <= 7)) && ((block_id <= 1)))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && (((offset <= 7)) && ((block_id == 0)))))) + cvmx_warn("CVMX_USBCX_HCSPLTX(%lu,%lu) is invalid on this chip\n", offset, block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000504ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32; +} +#else +#define CVMX_USBCX_HCSPLTX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000504ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_HCTSIZX(unsigned long offset, unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && (((offset <= 7)) && ((block_id <= 1)))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && (((offset <= 7)) && ((block_id == 0)))))) + cvmx_warn("CVMX_USBCX_HCTSIZX(%lu,%lu) is invalid on this chip\n", offset, block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000510ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32; +} +#else +#define CVMX_USBCX_HCTSIZX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010000510ull) + (((offset) & 7) + ((block_id) & 1) * 0x8000000000ull) * 32) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_HFIR(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_HFIR(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000404ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_HFIR(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000404ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_HFNUM(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_HFNUM(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000408ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_HFNUM(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000408ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_HPRT(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_HPRT(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000440ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_HPRT(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000440ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_HPTXFSIZ(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_HPTXFSIZ(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000100ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_HPTXFSIZ(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000100ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_HPTXSTS(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_HPTXSTS(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000410ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_HPTXSTS(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000410ull) + ((block_id) & 1) * 0x100000000000ull) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_NPTXDFIFOX(unsigned long offset, unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && (((offset <= 7)) && ((block_id == 0)))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && (((offset <= 7)) && ((block_id <= 1)))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && (((offset <= 7)) && ((block_id == 0)))))) + cvmx_warn("CVMX_USBCX_NPTXDFIFOX(%lu,%lu) is invalid on this chip\n", offset, block_id); + return CVMX_ADD_IO_SEG(0x00016F0010001000ull) + (((offset) & 7) + ((block_id) & 1) * 0x100000000ull) * 4096; +} +#else +#define CVMX_USBCX_NPTXDFIFOX(offset, block_id) (CVMX_ADD_IO_SEG(0x00016F0010001000ull) + (((offset) & 7) + ((block_id) & 1) * 0x100000000ull) * 4096) +#endif +#if CVMX_ENABLE_CSR_ADDRESS_CHECKING +static inline uint64_t CVMX_USBCX_PCGCCTL(unsigned long block_id) +{ + if (!( + (OCTEON_IS_MODEL(OCTEON_CN30XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN31XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN50XX) && ((block_id == 0))) || + (OCTEON_IS_MODEL(OCTEON_CN52XX) && ((block_id <= 1))) || + (OCTEON_IS_MODEL(OCTEON_CN56XX) && ((block_id == 0))))) + cvmx_warn("CVMX_USBCX_PCGCCTL(%lu) is invalid on this chip\n", block_id); + return CVMX_ADD_IO_SEG(0x00016F0010000E00ull) + ((block_id) & 1) * 0x100000000000ull; +} +#else +#define CVMX_USBCX_PCGCCTL(block_id) (CVMX_ADD_IO_SEG(0x00016F0010000E00ull) + ((block_id) & 1) * 0x100000000000ull) +#endif + +/** + * cvmx_usbc#_daint + * + * Device All Endpoints Interrupt Register (DAINT) + * + * When a significant event occurs on an endpoint, a Device All Endpoints Interrupt register + * interrupts the application using the Device OUT Endpoints Interrupt bit or Device IN Endpoints + * Interrupt bit of the Core Interrupt register (GINTSTS.OEPInt or GINTSTS.IEPInt, respectively). + * There is one interrupt bit per endpoint, up to a maximum of 16 bits for OUT endpoints and 16 + * bits for IN endpoints. For a bidirectional endpoint, the corresponding IN and OUT interrupt + * bits are used. Bits in this register are set and cleared when the application sets and clears + * bits in the corresponding Device Endpoint-n Interrupt register (DIEPINTn/DOEPINTn). + */ +union cvmx_usbcx_daint +{ + uint32_t u32; + struct cvmx_usbcx_daint_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t outepint : 16; /**< OUT Endpoint Interrupt Bits (OutEPInt) + One bit per OUT endpoint: + Bit 16 for OUT endpoint 0, bit 31 for OUT endpoint 15 */ + uint32_t inepint : 16; /**< IN Endpoint Interrupt Bits (InEpInt) + One bit per IN Endpoint: + Bit 0 for IN endpoint 0, bit 15 for endpoint 15 */ +#else + uint32_t inepint : 16; + uint32_t outepint : 16; +#endif + } s; + struct cvmx_usbcx_daint_s cn30xx; + struct cvmx_usbcx_daint_s cn31xx; + struct cvmx_usbcx_daint_s cn50xx; + struct cvmx_usbcx_daint_s cn52xx; + struct cvmx_usbcx_daint_s cn52xxp1; + struct cvmx_usbcx_daint_s cn56xx; + struct cvmx_usbcx_daint_s cn56xxp1; +}; +typedef union cvmx_usbcx_daint cvmx_usbcx_daint_t; + +/** + * cvmx_usbc#_daintmsk + * + * Device All Endpoints Interrupt Mask Register (DAINTMSK) + * + * The Device Endpoint Interrupt Mask register works with the Device Endpoint Interrupt register + * to interrupt the application when an event occurs on a device endpoint. However, the Device + * All Endpoints Interrupt (DAINT) register bit corresponding to that interrupt will still be set. + * Mask Interrupt: 1'b0 Unmask Interrupt: 1'b1 + */ +union cvmx_usbcx_daintmsk +{ + uint32_t u32; + struct cvmx_usbcx_daintmsk_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t outepmsk : 16; /**< OUT EP Interrupt Mask Bits (OutEpMsk) + One per OUT Endpoint: + Bit 16 for OUT EP 0, bit 31 for OUT EP 15 */ + uint32_t inepmsk : 16; /**< IN EP Interrupt Mask Bits (InEpMsk) + One bit per IN Endpoint: + Bit 0 for IN EP 0, bit 15 for IN EP 15 */ +#else + uint32_t inepmsk : 16; + uint32_t outepmsk : 16; +#endif + } s; + struct cvmx_usbcx_daintmsk_s cn30xx; + struct cvmx_usbcx_daintmsk_s cn31xx; + struct cvmx_usbcx_daintmsk_s cn50xx; + struct cvmx_usbcx_daintmsk_s cn52xx; + struct cvmx_usbcx_daintmsk_s cn52xxp1; + struct cvmx_usbcx_daintmsk_s cn56xx; + struct cvmx_usbcx_daintmsk_s cn56xxp1; +}; +typedef union cvmx_usbcx_daintmsk cvmx_usbcx_daintmsk_t; + +/** + * cvmx_usbc#_dcfg + * + * Device Configuration Register (DCFG) + * + * This register configures the core in Device mode after power-on or after certain control + * commands or enumeration. Do not make changes to this register after initial programming. + */ +union cvmx_usbcx_dcfg +{ + uint32_t u32; + struct cvmx_usbcx_dcfg_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_23_31 : 9; + uint32_t epmiscnt : 5; /**< IN Endpoint Mismatch Count (EPMisCnt) + The application programs this filed with a count that determines + when the core generates an Endpoint Mismatch interrupt + (GINTSTS.EPMis). The core loads this value into an internal + counter and decrements it. The counter is reloaded whenever + there is a match or when the counter expires. The width of this + counter depends on the depth of the Token Queue. */ + uint32_t reserved_13_17 : 5; + uint32_t perfrint : 2; /**< Periodic Frame Interval (PerFrInt) + Indicates the time within a (micro)frame at which the application + must be notified using the End Of Periodic Frame Interrupt. This + can be used to determine if all the isochronous traffic for that + (micro)frame is complete. + * 2'b00: 80% of the (micro)frame interval + * 2'b01: 85% + * 2'b10: 90% + * 2'b11: 95% */ + uint32_t devaddr : 7; /**< Device Address (DevAddr) + The application must program this field after every SetAddress + control command. */ + uint32_t reserved_3_3 : 1; + uint32_t nzstsouthshk : 1; /**< Non-Zero-Length Status OUT Handshake (NZStsOUTHShk) + The application can use this field to select the handshake the + core sends on receiving a nonzero-length data packet during + the OUT transaction of a control transfer's Status stage. + * 1'b1: Send a STALL handshake on a nonzero-length status + OUT transaction and do not send the received OUT packet to + the application. + * 1'b0: Send the received OUT packet to the application (zero- + length or nonzero-length) and send a handshake based on + the NAK and STALL bits for the endpoint in the Device + Endpoint Control register. */ + uint32_t devspd : 2; /**< Device Speed (DevSpd) + Indicates the speed at which the application requires the core to + enumerate, or the maximum speed the application can support. + However, the actual bus speed is determined only after the + chirp sequence is completed, and is based on the speed of the + USB host to which the core is connected. See "Device + Initialization" on page 249 for details. + * 2'b00: High speed (USB 2.0 PHY clock is 30 MHz or 60 MHz) + * 2'b01: Full speed (USB 2.0 PHY clock is 30 MHz or 60 MHz) + * 2'b10: Low speed (USB 1.1 transceiver clock is 6 MHz). If + you select 6 MHz LS mode, you must do a soft reset. + * 2'b11: Full speed (USB 1.1 transceiver clock is 48 MHz) */ +#else + uint32_t devspd : 2; + uint32_t nzstsouthshk : 1; + uint32_t reserved_3_3 : 1; + uint32_t devaddr : 7; + uint32_t perfrint : 2; + uint32_t reserved_13_17 : 5; + uint32_t epmiscnt : 5; + uint32_t reserved_23_31 : 9; +#endif + } s; + struct cvmx_usbcx_dcfg_s cn30xx; + struct cvmx_usbcx_dcfg_s cn31xx; + struct cvmx_usbcx_dcfg_s cn50xx; + struct cvmx_usbcx_dcfg_s cn52xx; + struct cvmx_usbcx_dcfg_s cn52xxp1; + struct cvmx_usbcx_dcfg_s cn56xx; + struct cvmx_usbcx_dcfg_s cn56xxp1; +}; +typedef union cvmx_usbcx_dcfg cvmx_usbcx_dcfg_t; + +/** + * cvmx_usbc#_dctl + * + * Device Control Register (DCTL) + * + */ +union cvmx_usbcx_dctl +{ + uint32_t u32; + struct cvmx_usbcx_dctl_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_12_31 : 20; + uint32_t pwronprgdone : 1; /**< Power-On Programming Done (PWROnPrgDone) + The application uses this bit to indicate that register + programming is completed after a wake-up from Power Down + mode. For more information, see "Device Mode Suspend and + Resume With Partial Power-Down" on page 357. */ + uint32_t cgoutnak : 1; /**< Clear Global OUT NAK (CGOUTNak) + A write to this field clears the Global OUT NAK. */ + uint32_t sgoutnak : 1; /**< Set Global OUT NAK (SGOUTNak) + A write to this field sets the Global OUT NAK. + The application uses this bit to send a NAK handshake on all + OUT endpoints. + The application should set the this bit only after making sure + that the Global OUT NAK Effective bit in the Core Interrupt + Register (GINTSTS.GOUTNakEff) is cleared. */ + uint32_t cgnpinnak : 1; /**< Clear Global Non-Periodic IN NAK (CGNPInNak) + A write to this field clears the Global Non-Periodic IN NAK. */ + uint32_t sgnpinnak : 1; /**< Set Global Non-Periodic IN NAK (SGNPInNak) + A write to this field sets the Global Non-Periodic IN NAK.The + application uses this bit to send a NAK handshake on all non- + periodic IN endpoints. The core can also set this bit when a + timeout condition is detected on a non-periodic endpoint. + The application should set this bit only after making sure that + the Global IN NAK Effective bit in the Core Interrupt Register + (GINTSTS.GINNakEff) is cleared. */ + uint32_t tstctl : 3; /**< Test Control (TstCtl) + * 3'b000: Test mode disabled + * 3'b001: Test_J mode + * 3'b010: Test_K mode + * 3'b011: Test_SE0_NAK mode + * 3'b100: Test_Packet mode + * 3'b101: Test_Force_Enable + * Others: Reserved */ + uint32_t goutnaksts : 1; /**< Global OUT NAK Status (GOUTNakSts) + * 1'b0: A handshake is sent based on the FIFO Status and the + NAK and STALL bit settings. + * 1'b1: No data is written to the RxFIFO, irrespective of space + availability. Sends a NAK handshake on all packets, except + on SETUP transactions. All isochronous OUT packets are + dropped. */ + uint32_t gnpinnaksts : 1; /**< Global Non-Periodic IN NAK Status (GNPINNakSts) + * 1'b0: A handshake is sent out based on the data availability + in the transmit FIFO. + * 1'b1: A NAK handshake is sent out on all non-periodic IN + endpoints, irrespective of the data availability in the transmit + FIFO. */ + uint32_t sftdiscon : 1; /**< Soft Disconnect (SftDiscon) + The application uses this bit to signal the O2P USB core to do a + soft disconnect. As long as this bit is set, the host will not see + that the device is connected, and the device will not receive + signals on the USB. The core stays in the disconnected state + until the application clears this bit. + The minimum duration for which the core must keep this bit set + is specified in Minimum Duration for Soft Disconnect . + * 1'b0: Normal operation. When this bit is cleared after a soft + disconnect, the core drives the phy_opmode_o signal on the + UTMI+ to 2'b00, which generates a device connect event to + the USB host. When the device is reconnected, the USB host + restarts device enumeration. + * 1'b1: The core drives the phy_opmode_o signal on the + UTMI+ to 2'b01, which generates a device disconnect event + to the USB host. */ + uint32_t rmtwkupsig : 1; /**< Remote Wakeup Signaling (RmtWkUpSig) + When the application sets this bit, the core initiates remote + signaling to wake up the USB host.The application must set this + bit to get the core out of Suspended state and must clear this bit + after the core comes out of Suspended state. */ +#else + uint32_t rmtwkupsig : 1; + uint32_t sftdiscon : 1; + uint32_t gnpinnaksts : 1; + uint32_t goutnaksts : 1; + uint32_t tstctl : 3; + uint32_t sgnpinnak : 1; + uint32_t cgnpinnak : 1; + uint32_t sgoutnak : 1; + uint32_t cgoutnak : 1; + uint32_t pwronprgdone : 1; + uint32_t reserved_12_31 : 20; +#endif + } s; + struct cvmx_usbcx_dctl_s cn30xx; + struct cvmx_usbcx_dctl_s cn31xx; + struct cvmx_usbcx_dctl_s cn50xx; + struct cvmx_usbcx_dctl_s cn52xx; + struct cvmx_usbcx_dctl_s cn52xxp1; + struct cvmx_usbcx_dctl_s cn56xx; + struct cvmx_usbcx_dctl_s cn56xxp1; +}; +typedef union cvmx_usbcx_dctl cvmx_usbcx_dctl_t; + +/** + * cvmx_usbc#_diepctl# + * + * Device IN Endpoint-n Control Register (DIEPCTLn) + * + * The application uses the register to control the behaviour of each logical endpoint other than endpoint 0. + */ +union cvmx_usbcx_diepctlx +{ + uint32_t u32; + struct cvmx_usbcx_diepctlx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t epena : 1; /**< Endpoint Enable (EPEna) + Indicates that data is ready to be transmitted on the endpoint. + The core clears this bit before setting any of the following + interrupts on this endpoint: + * Endpoint Disabled + * Transfer Completed */ + uint32_t epdis : 1; /**< Endpoint Disable (EPDis) + The application sets this bit to stop transmitting data on an + endpoint, even before the transfer for that endpoint is complete. + The application must wait for the Endpoint Disabled interrupt + before treating the endpoint as disabled. The core clears this bit + before setting the Endpoint Disabled Interrupt. The application + should set this bit only if Endpoint Enable is already set for this + endpoint. */ + uint32_t setd1pid : 1; /**< For Interrupt/BULK enpoints: + Set DATA1 PID (SetD1PID) + Writing to this field sets the Endpoint Data Pid (DPID) field in + this register to DATA1. + For Isochronous endpoints: + Set Odd (micro)frame (SetOddFr) + Writing to this field sets the Even/Odd (micro)frame (EO_FrNum) + field to odd (micro)frame. */ + uint32_t setd0pid : 1; /**< For Interrupt/BULK enpoints: + Writing to this field sets the Endpoint Data Pid (DPID) field in + this register to DATA0. + For Isochronous endpoints: + Set Odd (micro)frame (SetEvenFr) + Writing to this field sets the Even/Odd (micro)frame (EO_FrNum) + field to even (micro)frame. */ + uint32_t snak : 1; /**< Set NAK (SNAK) + A write to this bit sets the NAK bit for the endpoint. + Using this bit, the application can control the transmission of + NAK handshakes on an endpoint. The core can also set this bit + for an endpoint after a SETUP packet is received on the + endpoint. */ + uint32_t cnak : 1; /**< Clear NAK (CNAK) + A write to this bit clears the NAK bit for the endpoint. */ + uint32_t txfnum : 4; /**< TxFIFO Number (TxFNum) + Non-periodic endpoints must set this bit to zero. Periodic + endpoints must map this to the corresponding Periodic TxFIFO + number. + * 4'h0: Non-Periodic TxFIFO + * Others: Specified Periodic TxFIFO number */ + uint32_t stall : 1; /**< STALL Handshake (Stall) + For non-control, non-isochronous endpoints: + The application sets this bit to stall all tokens from the USB host + to this endpoint. If a NAK bit, Global Non-Periodic IN NAK, or + Global OUT NAK is set along with this bit, the STALL bit takes + priority. Only the application can clear this bit, never the core. + For control endpoints: + The application can only set this bit, and the core clears it, when + a SETUP token i received for this endpoint. If a NAK bit, Global + Non-Periodic IN NAK, or Global OUT NAK is set along with this + bit, the STALL bit takes priority. Irrespective of this bit's setting, + the core always responds to SETUP data packets with an ACK handshake. */ + uint32_t reserved_20_20 : 1; + uint32_t eptype : 2; /**< Endpoint Type (EPType) + This is the transfer type supported by this logical endpoint. + * 2'b00: Control + * 2'b01: Isochronous + * 2'b10: Bulk + * 2'b11: Interrupt */ + uint32_t naksts : 1; /**< NAK Status (NAKSts) + Indicates the following: + * 1'b0: The core is transmitting non-NAK handshakes based + on the FIFO status + * 1'b1: The core is transmitting NAK handshakes on this + endpoint. + When either the application or the core sets this bit: + * For non-isochronous IN endpoints: The core stops + transmitting any data on an IN endpoint, even if data is + available in the TxFIFO. + * For isochronous IN endpoints: The core sends out a zero- + length data packet, even if data is available in the TxFIFO. + Irrespective of this bit's setting, the core always responds to + SETUP data packets with an ACK handshake. */ + uint32_t dpid : 1; /**< For interrupt/bulk IN and OUT endpoints: + Endpoint Data PID (DPID) + Contains the PID of the packet to be received or transmitted on + this endpoint. The application should program the PID of the first + packet to be received or transmitted on this endpoint, after the + endpoint is activated. Applications use the SetD1PID and + SetD0PID fields of this register to program either DATA0 or + DATA1 PID. + * 1'b0: DATA0 + * 1'b1: DATA1 + For isochronous IN and OUT endpoints: + Even/Odd (Micro)Frame (EO_FrNum) + Indicates the (micro)frame number in which the core transmits/ + receives isochronous data for this endpoint. The application + should program the even/odd (micro) frame number in which it + intends to transmit/receive isochronous data for this endpoint + using the SetEvnFr and SetOddFr fields in this register. + * 1'b0: Even (micro)frame + * 1'b1: Odd (micro)frame */ + uint32_t usbactep : 1; /**< USB Active Endpoint (USBActEP) + Indicates whether this endpoint is active in the current + configuration and interface. The core clears this bit for all + endpoints (other than EP 0) after detecting a USB reset. After + receiving the SetConfiguration and SetInterface commands, the + application must program endpoint registers accordingly and set + this bit. */ + uint32_t nextep : 4; /**< Next Endpoint (NextEp) + Applies to non-periodic IN endpoints only. + Indicates the endpoint number to be fetched after the data for + the current endpoint is fetched. The core can access this field, + even when the Endpoint Enable (EPEna) bit is not set. This + field is not valid in Slave mode. */ + uint32_t mps : 11; /**< Maximum Packet Size (MPS) + Applies to IN and OUT endpoints. + The application must program this field with the maximum + packet size for the current logical endpoint. This value is in + bytes. */ +#else + uint32_t mps : 11; + uint32_t nextep : 4; + uint32_t usbactep : 1; + uint32_t dpid : 1; + uint32_t naksts : 1; + uint32_t eptype : 2; + uint32_t reserved_20_20 : 1; + uint32_t stall : 1; + uint32_t txfnum : 4; + uint32_t cnak : 1; + uint32_t snak : 1; + uint32_t setd0pid : 1; + uint32_t setd1pid : 1; + uint32_t epdis : 1; + uint32_t epena : 1; +#endif + } s; + struct cvmx_usbcx_diepctlx_s cn30xx; + struct cvmx_usbcx_diepctlx_s cn31xx; + struct cvmx_usbcx_diepctlx_s cn50xx; + struct cvmx_usbcx_diepctlx_s cn52xx; + struct cvmx_usbcx_diepctlx_s cn52xxp1; + struct cvmx_usbcx_diepctlx_s cn56xx; + struct cvmx_usbcx_diepctlx_s cn56xxp1; +}; +typedef union cvmx_usbcx_diepctlx cvmx_usbcx_diepctlx_t; + +/** + * cvmx_usbc#_diepint# + * + * Device Endpoint-n Interrupt Register (DIEPINTn) + * + * This register indicates the status of an endpoint with respect to + * USB- and AHB-related events. The application must read this register + * when the OUT Endpoints Interrupt bit or IN Endpoints Interrupt bit of + * the Core Interrupt register (GINTSTS.OEPInt or GINTSTS.IEPInt, + * respectively) is set. Before the application can read this register, + * it must first read the Device All Endpoints Interrupt (DAINT) register + * to get the exact endpoint number for the Device Endpoint-n Interrupt + * register. The application must clear the appropriate bit in this register + * to clear the corresponding bits in the DAINT and GINTSTS registers. + */ +union cvmx_usbcx_diepintx +{ + uint32_t u32; + struct cvmx_usbcx_diepintx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_7_31 : 25; + uint32_t inepnakeff : 1; /**< IN Endpoint NAK Effective (INEPNakEff) + Applies to periodic IN endpoints only. + Indicates that the IN endpoint NAK bit set by the application has + taken effect in the core. This bit can be cleared when the + application clears the IN endpoint NAK by writing to + DIEPCTLn.CNAK. + This interrupt indicates that the core has sampled the NAK bit + set (either by the application or by the core). + This interrupt does not necessarily mean that a NAK handshake + is sent on the USB. A STALL bit takes priority over a NAK bit. */ + uint32_t intknepmis : 1; /**< IN Token Received with EP Mismatch (INTknEPMis) + Applies to non-periodic IN endpoints only. + Indicates that the data in the top of the non-periodic TxFIFO + belongs to an endpoint other than the one for which the IN + token was received. This interrupt is asserted on the endpoint + for which the IN token was received. */ + uint32_t intkntxfemp : 1; /**< IN Token Received When TxFIFO is Empty (INTknTXFEmp) + Applies only to non-periodic IN endpoints. + Indicates that an IN token was received when the associated + TxFIFO (periodic/non-periodic) was empty. This interrupt is + asserted on the endpoint for which the IN token was received. */ + uint32_t timeout : 1; /**< Timeout Condition (TimeOUT) + Applies to non-isochronous IN endpoints only. + Indicates that the core has detected a timeout condition on the + USB for the last IN token on this endpoint. */ + uint32_t ahberr : 1; /**< AHB Error (AHBErr) + This is generated only in Internal DMA mode when there is an + AHB error during an AHB read/write. The application can read + the corresponding endpoint DMA address register to get the + error address. */ + uint32_t epdisbld : 1; /**< Endpoint Disabled Interrupt (EPDisbld) + This bit indicates that the endpoint is disabled per the + application's request. */ + uint32_t xfercompl : 1; /**< Transfer Completed Interrupt (XferCompl) + Indicates that the programmed transfer is complete on the AHB + as well as on the USB, for this endpoint. */ +#else + uint32_t xfercompl : 1; + uint32_t epdisbld : 1; + uint32_t ahberr : 1; + uint32_t timeout : 1; + uint32_t intkntxfemp : 1; + uint32_t intknepmis : 1; + uint32_t inepnakeff : 1; + uint32_t reserved_7_31 : 25; +#endif + } s; + struct cvmx_usbcx_diepintx_s cn30xx; + struct cvmx_usbcx_diepintx_s cn31xx; + struct cvmx_usbcx_diepintx_s cn50xx; + struct cvmx_usbcx_diepintx_s cn52xx; + struct cvmx_usbcx_diepintx_s cn52xxp1; + struct cvmx_usbcx_diepintx_s cn56xx; + struct cvmx_usbcx_diepintx_s cn56xxp1; +}; +typedef union cvmx_usbcx_diepintx cvmx_usbcx_diepintx_t; + +/** + * cvmx_usbc#_diepmsk + * + * Device IN Endpoint Common Interrupt Mask Register (DIEPMSK) + * + * This register works with each of the Device IN Endpoint Interrupt (DIEPINTn) registers + * for all endpoints to generate an interrupt per IN endpoint. The IN endpoint interrupt + * for a specific status in the DIEPINTn register can be masked by writing to the corresponding + * bit in this register. Status bits are masked by default. + * Mask interrupt: 1'b0 Unmask interrupt: 1'b1 + */ +union cvmx_usbcx_diepmsk +{ + uint32_t u32; + struct cvmx_usbcx_diepmsk_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_7_31 : 25; + uint32_t inepnakeffmsk : 1; /**< IN Endpoint NAK Effective Mask (INEPNakEffMsk) */ + uint32_t intknepmismsk : 1; /**< IN Token received with EP Mismatch Mask (INTknEPMisMsk) */ + uint32_t intkntxfempmsk : 1; /**< IN Token Received When TxFIFO Empty Mask + (INTknTXFEmpMsk) */ + uint32_t timeoutmsk : 1; /**< Timeout Condition Mask (TimeOUTMsk) + (Non-isochronous endpoints) */ + uint32_t ahberrmsk : 1; /**< AHB Error Mask (AHBErrMsk) */ + uint32_t epdisbldmsk : 1; /**< Endpoint Disabled Interrupt Mask (EPDisbldMsk) */ + uint32_t xfercomplmsk : 1; /**< Transfer Completed Interrupt Mask (XferComplMsk) */ +#else + uint32_t xfercomplmsk : 1; + uint32_t epdisbldmsk : 1; + uint32_t ahberrmsk : 1; + uint32_t timeoutmsk : 1; + uint32_t intkntxfempmsk : 1; + uint32_t intknepmismsk : 1; + uint32_t inepnakeffmsk : 1; + uint32_t reserved_7_31 : 25; +#endif + } s; + struct cvmx_usbcx_diepmsk_s cn30xx; + struct cvmx_usbcx_diepmsk_s cn31xx; + struct cvmx_usbcx_diepmsk_s cn50xx; + struct cvmx_usbcx_diepmsk_s cn52xx; + struct cvmx_usbcx_diepmsk_s cn52xxp1; + struct cvmx_usbcx_diepmsk_s cn56xx; + struct cvmx_usbcx_diepmsk_s cn56xxp1; +}; +typedef union cvmx_usbcx_diepmsk cvmx_usbcx_diepmsk_t; + +/** + * cvmx_usbc#_dieptsiz# + * + * Device Endpoint-n Transfer Size Register (DIEPTSIZn) + * + * The application must modify this register before enabling the endpoint. + * Once the endpoint is enabled using Endpoint Enable bit of the Device Endpoint-n Control registers (DIEPCTLn.EPEna/DOEPCTLn.EPEna), + * the core modifies this register. The application can only read this register once the core has cleared the Endpoint Enable bit. + * This register is used only for endpoints other than Endpoint 0. + */ +union cvmx_usbcx_dieptsizx +{ + uint32_t u32; + struct cvmx_usbcx_dieptsizx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_31_31 : 1; + uint32_t mc : 2; /**< Multi Count (MC) + Applies to IN endpoints only. + For periodic IN endpoints, this field indicates the number of + packets that must be transmitted per microframe on the USB. + The core uses this field to calculate the data PID for + isochronous IN endpoints. + * 2'b01: 1 packet + * 2'b10: 2 packets + * 2'b11: 3 packets + For non-periodic IN endpoints, this field is valid only in Internal + DMA mode. It specifies the number of packets the core should + fetch for an IN endpoint before it switches to the endpoint + pointed to by the Next Endpoint field of the Device Endpoint-n + Control register (DIEPCTLn.NextEp) */ + uint32_t pktcnt : 10; /**< Packet Count (PktCnt) + Indicates the total number of USB packets that constitute the + Transfer Size amount of data for this endpoint. + IN Endpoints: This field is decremented every time a packet + (maximum size or short packet) is read from the TxFIFO. */ + uint32_t xfersize : 19; /**< Transfer Size (XferSize) + This field contains the transfer size in bytes for the current + endpoint. + The core only interrupts the application after it has exhausted + the transfer size amount of data. The transfer size can be set to + the maximum packet size of the endpoint, to be interrupted at + the end of each packet. + IN Endpoints: The core decrements this field every time a + packet from the external memory is written to the TxFIFO. */ +#else + uint32_t xfersize : 19; + uint32_t pktcnt : 10; + uint32_t mc : 2; + uint32_t reserved_31_31 : 1; +#endif + } s; + struct cvmx_usbcx_dieptsizx_s cn30xx; + struct cvmx_usbcx_dieptsizx_s cn31xx; + struct cvmx_usbcx_dieptsizx_s cn50xx; + struct cvmx_usbcx_dieptsizx_s cn52xx; + struct cvmx_usbcx_dieptsizx_s cn52xxp1; + struct cvmx_usbcx_dieptsizx_s cn56xx; + struct cvmx_usbcx_dieptsizx_s cn56xxp1; +}; +typedef union cvmx_usbcx_dieptsizx cvmx_usbcx_dieptsizx_t; + +/** + * cvmx_usbc#_doepctl# + * + * Device OUT Endpoint-n Control Register (DOEPCTLn) + * + * The application uses the register to control the behaviour of each logical endpoint other than endpoint 0. + */ +union cvmx_usbcx_doepctlx +{ + uint32_t u32; + struct cvmx_usbcx_doepctlx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t epena : 1; /**< Endpoint Enable (EPEna) + Indicates that the application has allocated the memory tp start + receiving data from the USB. + The core clears this bit before setting any of the following + interrupts on this endpoint: + * SETUP Phase Done + * Endpoint Disabled + * Transfer Completed + For control OUT endpoints in DMA mode, this bit must be set + to be able to transfer SETUP data packets in memory. */ + uint32_t epdis : 1; /**< Endpoint Disable (EPDis) + The application sets this bit to stop transmitting data on an + endpoint, even before the transfer for that endpoint is complete. + The application must wait for the Endpoint Disabled interrupt + before treating the endpoint as disabled. The core clears this bit + before setting the Endpoint Disabled Interrupt. The application + should set this bit only if Endpoint Enable is already set for this + endpoint. */ + uint32_t setd1pid : 1; /**< For Interrupt/BULK enpoints: + Set DATA1 PID (SetD1PID) + Writing to this field sets the Endpoint Data Pid (DPID) field in + this register to DATA1. + For Isochronous endpoints: + Set Odd (micro)frame (SetOddFr) + Writing to this field sets the Even/Odd (micro)frame (EO_FrNum) + field to odd (micro)frame. */ + uint32_t setd0pid : 1; /**< For Interrupt/BULK enpoints: + Writing to this field sets the Endpoint Data Pid (DPID) field in + this register to DATA0. + For Isochronous endpoints: + Set Odd (micro)frame (SetEvenFr) + Writing to this field sets the Even/Odd (micro)frame (EO_FrNum) + field to even (micro)frame. */ + uint32_t snak : 1; /**< Set NAK (SNAK) + A write to this bit sets the NAK bit for the endpoint. + Using this bit, the application can control the transmission of + NAK handshakes on an endpoint. The core can also set this bit + for an endpoint after a SETUP packet is received on the + endpoint. */ + uint32_t cnak : 1; /**< Clear NAK (CNAK) + A write to this bit clears the NAK bit for the endpoint. */ + uint32_t reserved_22_25 : 4; + uint32_t stall : 1; /**< STALL Handshake (Stall) + For non-control, non-isochronous endpoints: + The application sets this bit to stall all tokens from the USB host + to this endpoint. If a NAK bit, Global Non-Periodic IN NAK, or + Global OUT NAK is set along with this bit, the STALL bit takes + priority. Only the application can clear this bit, never the core. + For control endpoints: + The application can only set this bit, and the core clears it, when + a SETUP token i received for this endpoint. If a NAK bit, Global + Non-Periodic IN NAK, or Global OUT NAK is set along with this + bit, the STALL bit takes priority. Irrespective of this bit's setting, + the core always responds to SETUP data packets with an ACK handshake. */ + uint32_t snp : 1; /**< Snoop Mode (Snp) + This bit configures the endpoint to Snoop mode. In Snoop mode, + the core does not check the correctness of OUT packets before + transferring them to application memory. */ + uint32_t eptype : 2; /**< Endpoint Type (EPType) + This is the transfer type supported by this logical endpoint. + * 2'b00: Control + * 2'b01: Isochronous + * 2'b10: Bulk + * 2'b11: Interrupt */ + uint32_t naksts : 1; /**< NAK Status (NAKSts) + Indicates the following: + * 1'b0: The core is transmitting non-NAK handshakes based + on the FIFO status + * 1'b1: The core is transmitting NAK handshakes on this + endpoint. + When either the application or the core sets this bit: + * The core stops receiving any data on an OUT endpoint, even + if there is space in the RxFIFO to accomodate the incoming + packet. */ + uint32_t dpid : 1; /**< For interrupt/bulk IN and OUT endpoints: + Endpoint Data PID (DPID) + Contains the PID of the packet to be received or transmitted on + this endpoint. The application should program the PID of the first + packet to be received or transmitted on this endpoint, after the + endpoint is activated. Applications use the SetD1PID and + SetD0PID fields of this register to program either DATA0 or + DATA1 PID. + * 1'b0: DATA0 + * 1'b1: DATA1 + For isochronous IN and OUT endpoints: + Even/Odd (Micro)Frame (EO_FrNum) + Indicates the (micro)frame number in which the core transmits/ + receives isochronous data for this endpoint. The application + should program the even/odd (micro) frame number in which it + intends to transmit/receive isochronous data for this endpoint + using the SetEvnFr and SetOddFr fields in this register. + * 1'b0: Even (micro)frame + * 1'b1: Odd (micro)frame */ + uint32_t usbactep : 1; /**< USB Active Endpoint (USBActEP) + Indicates whether this endpoint is active in the current + configuration and interface. The core clears this bit for all + endpoints (other than EP 0) after detecting a USB reset. After + receiving the SetConfiguration and SetInterface commands, the + application must program endpoint registers accordingly and set + this bit. */ + uint32_t reserved_11_14 : 4; + uint32_t mps : 11; /**< Maximum Packet Size (MPS) + Applies to IN and OUT endpoints. + The application must program this field with the maximum + packet size for the current logical endpoint. This value is in + bytes. */ +#else + uint32_t mps : 11; + uint32_t reserved_11_14 : 4; + uint32_t usbactep : 1; + uint32_t dpid : 1; + uint32_t naksts : 1; + uint32_t eptype : 2; + uint32_t snp : 1; + uint32_t stall : 1; + uint32_t reserved_22_25 : 4; + uint32_t cnak : 1; + uint32_t snak : 1; + uint32_t setd0pid : 1; + uint32_t setd1pid : 1; + uint32_t epdis : 1; + uint32_t epena : 1; +#endif + } s; + struct cvmx_usbcx_doepctlx_s cn30xx; + struct cvmx_usbcx_doepctlx_s cn31xx; + struct cvmx_usbcx_doepctlx_s cn50xx; + struct cvmx_usbcx_doepctlx_s cn52xx; + struct cvmx_usbcx_doepctlx_s cn52xxp1; + struct cvmx_usbcx_doepctlx_s cn56xx; + struct cvmx_usbcx_doepctlx_s cn56xxp1; +}; +typedef union cvmx_usbcx_doepctlx cvmx_usbcx_doepctlx_t; + +/** + * cvmx_usbc#_doepint# + * + * Device Endpoint-n Interrupt Register (DOEPINTn) + * + * This register indicates the status of an endpoint with respect to USB- and AHB-related events. + * The application must read this register when the OUT Endpoints Interrupt bit or IN Endpoints + * Interrupt bit of the Core Interrupt register (GINTSTS.OEPInt or GINTSTS.IEPInt, respectively) + * is set. Before the application can read this register, it must first read the Device All + * Endpoints Interrupt (DAINT) register to get the exact endpoint number for the Device Endpoint-n + * Interrupt register. The application must clear the appropriate bit in this register to clear the + * corresponding bits in the DAINT and GINTSTS registers. + */ +union cvmx_usbcx_doepintx +{ + uint32_t u32; + struct cvmx_usbcx_doepintx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_5_31 : 27; + uint32_t outtknepdis : 1; /**< OUT Token Received When Endpoint Disabled (OUTTknEPdis) + Applies only to control OUT endpoints. + Indicates that an OUT token was received when the endpoint + was not yet enabled. This interrupt is asserted on the endpoint + for which the OUT token was received. */ + uint32_t setup : 1; /**< SETUP Phase Done (SetUp) + Applies to control OUT endpoints only. + Indicates that the SETUP phase for the control endpoint is + complete and no more back-to-back SETUP packets were + received for the current control transfer. On this interrupt, the + application can decode the received SETUP data packet. */ + uint32_t ahberr : 1; /**< AHB Error (AHBErr) + This is generated only in Internal DMA mode when there is an + AHB error during an AHB read/write. The application can read + the corresponding endpoint DMA address register to get the + error address. */ + uint32_t epdisbld : 1; /**< Endpoint Disabled Interrupt (EPDisbld) + This bit indicates that the endpoint is disabled per the + application's request. */ + uint32_t xfercompl : 1; /**< Transfer Completed Interrupt (XferCompl) + Indicates that the programmed transfer is complete on the AHB + as well as on the USB, for this endpoint. */ +#else + uint32_t xfercompl : 1; + uint32_t epdisbld : 1; + uint32_t ahberr : 1; + uint32_t setup : 1; + uint32_t outtknepdis : 1; + uint32_t reserved_5_31 : 27; +#endif + } s; + struct cvmx_usbcx_doepintx_s cn30xx; + struct cvmx_usbcx_doepintx_s cn31xx; + struct cvmx_usbcx_doepintx_s cn50xx; + struct cvmx_usbcx_doepintx_s cn52xx; + struct cvmx_usbcx_doepintx_s cn52xxp1; + struct cvmx_usbcx_doepintx_s cn56xx; + struct cvmx_usbcx_doepintx_s cn56xxp1; +}; +typedef union cvmx_usbcx_doepintx cvmx_usbcx_doepintx_t; + +/** + * cvmx_usbc#_doepmsk + * + * Device OUT Endpoint Common Interrupt Mask Register (DOEPMSK) + * + * This register works with each of the Device OUT Endpoint Interrupt (DOEPINTn) registers + * for all endpoints to generate an interrupt per OUT endpoint. The OUT endpoint interrupt + * for a specific status in the DOEPINTn register can be masked by writing into the + * corresponding bit in this register. Status bits are masked by default. + * Mask interrupt: 1'b0 Unmask interrupt: 1'b1 + */ +union cvmx_usbcx_doepmsk +{ + uint32_t u32; + struct cvmx_usbcx_doepmsk_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_5_31 : 27; + uint32_t outtknepdismsk : 1; /**< OUT Token Received when Endpoint Disabled Mask + (OUTTknEPdisMsk) + Applies to control OUT endpoints only. */ + uint32_t setupmsk : 1; /**< SETUP Phase Done Mask (SetUPMsk) + Applies to control endpoints only. */ + uint32_t ahberrmsk : 1; /**< AHB Error (AHBErrMsk) */ + uint32_t epdisbldmsk : 1; /**< Endpoint Disabled Interrupt Mask (EPDisbldMsk) */ + uint32_t xfercomplmsk : 1; /**< Transfer Completed Interrupt Mask (XferComplMsk) */ +#else + uint32_t xfercomplmsk : 1; + uint32_t epdisbldmsk : 1; + uint32_t ahberrmsk : 1; + uint32_t setupmsk : 1; + uint32_t outtknepdismsk : 1; + uint32_t reserved_5_31 : 27; +#endif + } s; + struct cvmx_usbcx_doepmsk_s cn30xx; + struct cvmx_usbcx_doepmsk_s cn31xx; + struct cvmx_usbcx_doepmsk_s cn50xx; + struct cvmx_usbcx_doepmsk_s cn52xx; + struct cvmx_usbcx_doepmsk_s cn52xxp1; + struct cvmx_usbcx_doepmsk_s cn56xx; + struct cvmx_usbcx_doepmsk_s cn56xxp1; +}; +typedef union cvmx_usbcx_doepmsk cvmx_usbcx_doepmsk_t; + +/** + * cvmx_usbc#_doeptsiz# + * + * Device Endpoint-n Transfer Size Register (DOEPTSIZn) + * + * The application must modify this register before enabling the endpoint. + * Once the endpoint is enabled using Endpoint Enable bit of the Device Endpoint-n Control + * registers (DOEPCTLn.EPEna/DOEPCTLn.EPEna), the core modifies this register. The application + * can only read this register once the core has cleared the Endpoint Enable bit. + * This register is used only for endpoints other than Endpoint 0. + */ +union cvmx_usbcx_doeptsizx +{ + uint32_t u32; + struct cvmx_usbcx_doeptsizx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_31_31 : 1; + uint32_t mc : 2; /**< Multi Count (MC) + Received Data PID (RxDPID) + Applies to isochronous OUT endpoints only. + This is the data PID received in the last packet for this endpoint. + 2'b00: DATA0 + 2'b01: DATA1 + 2'b10: DATA2 + 2'b11: MDATA + SETUP Packet Count (SUPCnt) + Applies to control OUT Endpoints only. + This field specifies the number of back-to-back SETUP data + packets the endpoint can receive. + 2'b01: 1 packet + 2'b10: 2 packets + 2'b11: 3 packets */ + uint32_t pktcnt : 10; /**< Packet Count (PktCnt) + Indicates the total number of USB packets that constitute the + Transfer Size amount of data for this endpoint. + OUT Endpoints: This field is decremented every time a + packet (maximum size or short packet) is written to the + RxFIFO. */ + uint32_t xfersize : 19; /**< Transfer Size (XferSize) + This field contains the transfer size in bytes for the current + endpoint. + The core only interrupts the application after it has exhausted + the transfer size amount of data. The transfer size can be set to + the maximum packet size of the endpoint, to be interrupted at + the end of each packet. + OUT Endpoints: The core decrements this field every time a + packet is read from the RxFIFO and written to the external + memory. */ +#else + uint32_t xfersize : 19; + uint32_t pktcnt : 10; + uint32_t mc : 2; + uint32_t reserved_31_31 : 1; +#endif + } s; + struct cvmx_usbcx_doeptsizx_s cn30xx; + struct cvmx_usbcx_doeptsizx_s cn31xx; + struct cvmx_usbcx_doeptsizx_s cn50xx; + struct cvmx_usbcx_doeptsizx_s cn52xx; + struct cvmx_usbcx_doeptsizx_s cn52xxp1; + struct cvmx_usbcx_doeptsizx_s cn56xx; + struct cvmx_usbcx_doeptsizx_s cn56xxp1; +}; +typedef union cvmx_usbcx_doeptsizx cvmx_usbcx_doeptsizx_t; + +/** + * cvmx_usbc#_dptxfsiz# + * + * Device Periodic Transmit FIFO-n Size Register (DPTXFSIZ) + * + * This register holds the memory start address of each periodic TxFIFO to implemented + * in Device mode. Each periodic FIFO holds the data for one periodic IN endpoint. + * This register is repeated for each periodic FIFO instantiated. + */ +union cvmx_usbcx_dptxfsizx +{ + uint32_t u32; + struct cvmx_usbcx_dptxfsizx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t dptxfsize : 16; /**< Device Periodic TxFIFO Size (DPTxFSize) + This value is in terms of 32-bit words. + * Minimum value is 4 + * Maximum value is 768 */ + uint32_t dptxfstaddr : 16; /**< Device Periodic TxFIFO RAM Start Address (DPTxFStAddr) + Holds the start address in the RAM for this periodic FIFO. */ +#else + uint32_t dptxfstaddr : 16; + uint32_t dptxfsize : 16; +#endif + } s; + struct cvmx_usbcx_dptxfsizx_s cn30xx; + struct cvmx_usbcx_dptxfsizx_s cn31xx; + struct cvmx_usbcx_dptxfsizx_s cn50xx; + struct cvmx_usbcx_dptxfsizx_s cn52xx; + struct cvmx_usbcx_dptxfsizx_s cn52xxp1; + struct cvmx_usbcx_dptxfsizx_s cn56xx; + struct cvmx_usbcx_dptxfsizx_s cn56xxp1; +}; +typedef union cvmx_usbcx_dptxfsizx cvmx_usbcx_dptxfsizx_t; + +/** + * cvmx_usbc#_dsts + * + * Device Status Register (DSTS) + * + * This register indicates the status of the core with respect to USB-related events. + * It must be read on interrupts from Device All Interrupts (DAINT) register. + */ +union cvmx_usbcx_dsts +{ + uint32_t u32; + struct cvmx_usbcx_dsts_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_22_31 : 10; + uint32_t soffn : 14; /**< Frame or Microframe Number of the Received SOF (SOFFN) + When the core is operating at high speed, this field contains a + microframe number. When the core is operating at full or low + speed, this field contains a frame number. */ + uint32_t reserved_4_7 : 4; + uint32_t errticerr : 1; /**< Erratic Error (ErrticErr) + The core sets this bit to report any erratic errors + (phy_rxvalid_i/phy_rxvldh_i or phy_rxactive_i is asserted for at + least 2 ms, due to PHY error) seen on the UTMI+. + Due to erratic errors, the O2P USB core goes into Suspended + state and an interrupt is generated to the application with Early + Suspend bit of the Core Interrupt register (GINTSTS.ErlySusp). + If the early suspend is asserted due to an erratic error, the + application can only perform a soft disconnect recover. */ + uint32_t enumspd : 2; /**< Enumerated Speed (EnumSpd) + Indicates the speed at which the O2P USB core has come up + after speed detection through a chirp sequence. + * 2'b00: High speed (PHY clock is running at 30 or 60 MHz) + * 2'b01: Full speed (PHY clock is running at 30 or 60 MHz) + * 2'b10: Low speed (PHY clock is running at 6 MHz) + * 2'b11: Full speed (PHY clock is running at 48 MHz) + Low speed is not supported for devices using a UTMI+ PHY. */ + uint32_t suspsts : 1; /**< Suspend Status (SuspSts) + In Device mode, this bit is set as long as a Suspend condition is + detected on the USB. The core enters the Suspended state + when there is no activity on the phy_line_state_i signal for an + extended period of time. The core comes out of the suspend: + * When there is any activity on the phy_line_state_i signal + * When the application writes to the Remote Wakeup Signaling + bit in the Device Control register (DCTL.RmtWkUpSig). */ +#else + uint32_t suspsts : 1; + uint32_t enumspd : 2; + uint32_t errticerr : 1; + uint32_t reserved_4_7 : 4; + uint32_t soffn : 14; + uint32_t reserved_22_31 : 10; +#endif + } s; + struct cvmx_usbcx_dsts_s cn30xx; + struct cvmx_usbcx_dsts_s cn31xx; + struct cvmx_usbcx_dsts_s cn50xx; + struct cvmx_usbcx_dsts_s cn52xx; + struct cvmx_usbcx_dsts_s cn52xxp1; + struct cvmx_usbcx_dsts_s cn56xx; + struct cvmx_usbcx_dsts_s cn56xxp1; +}; +typedef union cvmx_usbcx_dsts cvmx_usbcx_dsts_t; + +/** + * cvmx_usbc#_dtknqr1 + * + * Device IN Token Sequence Learning Queue Read Register 1 (DTKNQR1) + * + * The depth of the IN Token Sequence Learning Queue is specified for Device Mode IN Token + * Sequence Learning Queue Depth. The queue is 4 bits wide to store the endpoint number. + * A read from this register returns the first 5 endpoint entries of the IN Token Sequence + * Learning Queue. When the queue is full, the new token is pushed into the queue and oldest + * token is discarded. + */ +union cvmx_usbcx_dtknqr1 +{ + uint32_t u32; + struct cvmx_usbcx_dtknqr1_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t eptkn : 24; /**< Endpoint Token (EPTkn) + Four bits per token represent the endpoint number of the token: + * Bits [31:28]: Endpoint number of Token 5 + * Bits [27:24]: Endpoint number of Token 4 + - ....... + * Bits [15:12]: Endpoint number of Token 1 + * Bits [11:8]: Endpoint number of Token 0 */ + uint32_t wrapbit : 1; /**< Wrap Bit (WrapBit) + This bit is set when the write pointer wraps. It is cleared when + the learning queue is cleared. */ + uint32_t reserved_5_6 : 2; + uint32_t intknwptr : 5; /**< IN Token Queue Write Pointer (INTknWPtr) */ +#else + uint32_t intknwptr : 5; + uint32_t reserved_5_6 : 2; + uint32_t wrapbit : 1; + uint32_t eptkn : 24; +#endif + } s; + struct cvmx_usbcx_dtknqr1_s cn30xx; + struct cvmx_usbcx_dtknqr1_s cn31xx; + struct cvmx_usbcx_dtknqr1_s cn50xx; + struct cvmx_usbcx_dtknqr1_s cn52xx; + struct cvmx_usbcx_dtknqr1_s cn52xxp1; + struct cvmx_usbcx_dtknqr1_s cn56xx; + struct cvmx_usbcx_dtknqr1_s cn56xxp1; +}; +typedef union cvmx_usbcx_dtknqr1 cvmx_usbcx_dtknqr1_t; + +/** + * cvmx_usbc#_dtknqr2 + * + * Device IN Token Sequence Learning Queue Read Register 2 (DTKNQR2) + * + * A read from this register returns the next 8 endpoint entries of the learning queue. + */ +union cvmx_usbcx_dtknqr2 +{ + uint32_t u32; + struct cvmx_usbcx_dtknqr2_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t eptkn : 32; /**< Endpoint Token (EPTkn) + Four bits per token represent the endpoint number of the token: + * Bits [31:28]: Endpoint number of Token 13 + * Bits [27:24]: Endpoint number of Token 12 + - ....... + * Bits [7:4]: Endpoint number of Token 7 + * Bits [3:0]: Endpoint number of Token 6 */ +#else + uint32_t eptkn : 32; +#endif + } s; + struct cvmx_usbcx_dtknqr2_s cn30xx; + struct cvmx_usbcx_dtknqr2_s cn31xx; + struct cvmx_usbcx_dtknqr2_s cn50xx; + struct cvmx_usbcx_dtknqr2_s cn52xx; + struct cvmx_usbcx_dtknqr2_s cn52xxp1; + struct cvmx_usbcx_dtknqr2_s cn56xx; + struct cvmx_usbcx_dtknqr2_s cn56xxp1; +}; +typedef union cvmx_usbcx_dtknqr2 cvmx_usbcx_dtknqr2_t; + +/** + * cvmx_usbc#_dtknqr3 + * + * Device IN Token Sequence Learning Queue Read Register 3 (DTKNQR3) + * + * A read from this register returns the next 8 endpoint entries of the learning queue. + */ +union cvmx_usbcx_dtknqr3 +{ + uint32_t u32; + struct cvmx_usbcx_dtknqr3_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t eptkn : 32; /**< Endpoint Token (EPTkn) + Four bits per token represent the endpoint number of the token: + * Bits [31:28]: Endpoint number of Token 21 + * Bits [27:24]: Endpoint number of Token 20 + - ....... + * Bits [7:4]: Endpoint number of Token 15 + * Bits [3:0]: Endpoint number of Token 14 */ +#else + uint32_t eptkn : 32; +#endif + } s; + struct cvmx_usbcx_dtknqr3_s cn30xx; + struct cvmx_usbcx_dtknqr3_s cn31xx; + struct cvmx_usbcx_dtknqr3_s cn50xx; + struct cvmx_usbcx_dtknqr3_s cn52xx; + struct cvmx_usbcx_dtknqr3_s cn52xxp1; + struct cvmx_usbcx_dtknqr3_s cn56xx; + struct cvmx_usbcx_dtknqr3_s cn56xxp1; +}; +typedef union cvmx_usbcx_dtknqr3 cvmx_usbcx_dtknqr3_t; + +/** + * cvmx_usbc#_dtknqr4 + * + * Device IN Token Sequence Learning Queue Read Register 4 (DTKNQR4) + * + * A read from this register returns the last 8 endpoint entries of the learning queue. + */ +union cvmx_usbcx_dtknqr4 +{ + uint32_t u32; + struct cvmx_usbcx_dtknqr4_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t eptkn : 32; /**< Endpoint Token (EPTkn) + Four bits per token represent the endpoint number of the token: + * Bits [31:28]: Endpoint number of Token 29 + * Bits [27:24]: Endpoint number of Token 28 + - ....... + * Bits [7:4]: Endpoint number of Token 23 + * Bits [3:0]: Endpoint number of Token 22 */ +#else + uint32_t eptkn : 32; +#endif + } s; + struct cvmx_usbcx_dtknqr4_s cn30xx; + struct cvmx_usbcx_dtknqr4_s cn31xx; + struct cvmx_usbcx_dtknqr4_s cn50xx; + struct cvmx_usbcx_dtknqr4_s cn52xx; + struct cvmx_usbcx_dtknqr4_s cn52xxp1; + struct cvmx_usbcx_dtknqr4_s cn56xx; + struct cvmx_usbcx_dtknqr4_s cn56xxp1; +}; +typedef union cvmx_usbcx_dtknqr4 cvmx_usbcx_dtknqr4_t; + +/** + * cvmx_usbc#_gahbcfg + * + * Core AHB Configuration Register (GAHBCFG) + * + * This register can be used to configure the core after power-on or a change in mode of operation. + * This register mainly contains AHB system-related configuration parameters. The AHB is the processor + * interface to the O2P USB core. In general, software need not know about this interface except to + * program the values as specified. + * + * The application must program this register as part of the O2P USB core initialization. + * Do not change this register after the initial programming. + */ +union cvmx_usbcx_gahbcfg +{ + uint32_t u32; + struct cvmx_usbcx_gahbcfg_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_9_31 : 23; + uint32_t ptxfemplvl : 1; /**< Periodic TxFIFO Empty Level (PTxFEmpLvl) + Software should set this bit to 0x1. + Indicates when the Periodic TxFIFO Empty Interrupt bit in the + Core Interrupt register (GINTSTS.PTxFEmp) is triggered. This + bit is used only in Slave mode. + * 1'b0: GINTSTS.PTxFEmp interrupt indicates that the Periodic + TxFIFO is half empty + * 1'b1: GINTSTS.PTxFEmp interrupt indicates that the Periodic + TxFIFO is completely empty */ + uint32_t nptxfemplvl : 1; /**< Non-Periodic TxFIFO Empty Level (NPTxFEmpLvl) + Software should set this bit to 0x1. + Indicates when the Non-Periodic TxFIFO Empty Interrupt bit in + the Core Interrupt register (GINTSTS.NPTxFEmp) is triggered. + This bit is used only in Slave mode. + * 1'b0: GINTSTS.NPTxFEmp interrupt indicates that the Non- + Periodic TxFIFO is half empty + * 1'b1: GINTSTS.NPTxFEmp interrupt indicates that the Non- + Periodic TxFIFO is completely empty */ + uint32_t reserved_6_6 : 1; + uint32_t dmaen : 1; /**< DMA Enable (DMAEn) + * 1'b0: Core operates in Slave mode + * 1'b1: Core operates in a DMA mode */ + uint32_t hbstlen : 4; /**< Burst Length/Type (HBstLen) + This field has not effect and should be left as 0x0. */ + uint32_t glblintrmsk : 1; /**< Global Interrupt Mask (GlblIntrMsk) + Software should set this field to 0x1. + The application uses this bit to mask or unmask the interrupt + line assertion to itself. Irrespective of this bit's setting, the + interrupt status registers are updated by the core. + * 1'b0: Mask the interrupt assertion to the application. + * 1'b1: Unmask the interrupt assertion to the application. */ +#else + uint32_t glblintrmsk : 1; + uint32_t hbstlen : 4; + uint32_t dmaen : 1; + uint32_t reserved_6_6 : 1; + uint32_t nptxfemplvl : 1; + uint32_t ptxfemplvl : 1; + uint32_t reserved_9_31 : 23; +#endif + } s; + struct cvmx_usbcx_gahbcfg_s cn30xx; + struct cvmx_usbcx_gahbcfg_s cn31xx; + struct cvmx_usbcx_gahbcfg_s cn50xx; + struct cvmx_usbcx_gahbcfg_s cn52xx; + struct cvmx_usbcx_gahbcfg_s cn52xxp1; + struct cvmx_usbcx_gahbcfg_s cn56xx; + struct cvmx_usbcx_gahbcfg_s cn56xxp1; +}; +typedef union cvmx_usbcx_gahbcfg cvmx_usbcx_gahbcfg_t; + +/** + * cvmx_usbc#_ghwcfg1 + * + * User HW Config1 Register (GHWCFG1) + * + * This register contains the logical endpoint direction(s) of the O2P USB core. + */ +union cvmx_usbcx_ghwcfg1 +{ + uint32_t u32; + struct cvmx_usbcx_ghwcfg1_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t epdir : 32; /**< Endpoint Direction (epdir) + Two bits per endpoint represent the direction. + * 2'b00: BIDIR (IN and OUT) endpoint + * 2'b01: IN endpoint + * 2'b10: OUT endpoint + * 2'b11: Reserved + Bits [31:30]: Endpoint 15 direction + Bits [29:28]: Endpoint 14 direction + - ... + Bits [3:2]: Endpoint 1 direction + Bits[1:0]: Endpoint 0 direction (always BIDIR) */ +#else + uint32_t epdir : 32; +#endif + } s; + struct cvmx_usbcx_ghwcfg1_s cn30xx; + struct cvmx_usbcx_ghwcfg1_s cn31xx; + struct cvmx_usbcx_ghwcfg1_s cn50xx; + struct cvmx_usbcx_ghwcfg1_s cn52xx; + struct cvmx_usbcx_ghwcfg1_s cn52xxp1; + struct cvmx_usbcx_ghwcfg1_s cn56xx; + struct cvmx_usbcx_ghwcfg1_s cn56xxp1; +}; +typedef union cvmx_usbcx_ghwcfg1 cvmx_usbcx_ghwcfg1_t; + +/** + * cvmx_usbc#_ghwcfg2 + * + * User HW Config2 Register (GHWCFG2) + * + * This register contains configuration options of the O2P USB core. + */ +union cvmx_usbcx_ghwcfg2 +{ + uint32_t u32; + struct cvmx_usbcx_ghwcfg2_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_31_31 : 1; + uint32_t tknqdepth : 5; /**< Device Mode IN Token Sequence Learning Queue Depth + (TknQDepth) + Range: 0-30 */ + uint32_t ptxqdepth : 2; /**< Host Mode Periodic Request Queue Depth (PTxQDepth) + * 2'b00: 2 + * 2'b01: 4 + * 2'b10: 8 + * Others: Reserved */ + uint32_t nptxqdepth : 2; /**< Non-Periodic Request Queue Depth (NPTxQDepth) + * 2'b00: 2 + * 2'b01: 4 + * 2'b10: 8 + * Others: Reserved */ + uint32_t reserved_20_21 : 2; + uint32_t dynfifosizing : 1; /**< Dynamic FIFO Sizing Enabled (DynFifoSizing) + * 1'b0: No + * 1'b1: Yes */ + uint32_t periosupport : 1; /**< Periodic OUT Channels Supported in Host Mode + (PerioSupport) + * 1'b0: No + * 1'b1: Yes */ + uint32_t numhstchnl : 4; /**< Number of Host Channels (NumHstChnl) + Indicates the number of host channels supported by the core in + Host mode. The range of this field is 0-15: 0 specifies 1 + channel, 15 specifies 16 channels. */ + uint32_t numdeveps : 4; /**< Number of Device Endpoints (NumDevEps) + Indicates the number of device endpoints supported by the core + in Device mode in addition to control endpoint 0. The range of + this field is 1-15. */ + uint32_t fsphytype : 2; /**< Full-Speed PHY Interface Type (FSPhyType) + * 2'b00: Full-speed interface not supported + * 2'b01: Dedicated full-speed interface + * 2'b10: FS pins shared with UTMI+ pins + * 2'b11: FS pins shared with ULPI pins */ + uint32_t hsphytype : 2; /**< High-Speed PHY Interface Type (HSPhyType) + * 2'b00: High-Speed interface not supported + * 2'b01: UTMI+ + * 2'b10: ULPI + * 2'b11: UTMI+ and ULPI */ + uint32_t singpnt : 1; /**< Point-to-Point (SingPnt) + * 1'b0: Multi-point application + * 1'b1: Single-point application */ + uint32_t otgarch : 2; /**< Architecture (OtgArch) + * 2'b00: Slave-Only + * 2'b01: External DMA + * 2'b10: Internal DMA + * Others: Reserved */ + uint32_t otgmode : 3; /**< Mode of Operation (OtgMode) + * 3'b000: HNP- and SRP-Capable OTG (Host & Device) + * 3'b001: SRP-Capable OTG (Host & Device) + * 3'b010: Non-HNP and Non-SRP Capable OTG (Host & + Device) + * 3'b011: SRP-Capable Device + * 3'b100: Non-OTG Device + * 3'b101: SRP-Capable Host + * 3'b110: Non-OTG Host + * Others: Reserved */ +#else + uint32_t otgmode : 3; + uint32_t otgarch : 2; + uint32_t singpnt : 1; + uint32_t hsphytype : 2; + uint32_t fsphytype : 2; + uint32_t numdeveps : 4; + uint32_t numhstchnl : 4; + uint32_t periosupport : 1; + uint32_t dynfifosizing : 1; + uint32_t reserved_20_21 : 2; + uint32_t nptxqdepth : 2; + uint32_t ptxqdepth : 2; + uint32_t tknqdepth : 5; + uint32_t reserved_31_31 : 1; +#endif + } s; + struct cvmx_usbcx_ghwcfg2_s cn30xx; + struct cvmx_usbcx_ghwcfg2_s cn31xx; + struct cvmx_usbcx_ghwcfg2_s cn50xx; + struct cvmx_usbcx_ghwcfg2_s cn52xx; + struct cvmx_usbcx_ghwcfg2_s cn52xxp1; + struct cvmx_usbcx_ghwcfg2_s cn56xx; + struct cvmx_usbcx_ghwcfg2_s cn56xxp1; +}; +typedef union cvmx_usbcx_ghwcfg2 cvmx_usbcx_ghwcfg2_t; + +/** + * cvmx_usbc#_ghwcfg3 + * + * User HW Config3 Register (GHWCFG3) + * + * This register contains the configuration options of the O2P USB core. + */ +union cvmx_usbcx_ghwcfg3 +{ + uint32_t u32; + struct cvmx_usbcx_ghwcfg3_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t dfifodepth : 16; /**< DFIFO Depth (DfifoDepth) + This value is in terms of 32-bit words. + * Minimum value is 32 + * Maximum value is 32768 */ + uint32_t reserved_13_15 : 3; + uint32_t ahbphysync : 1; /**< AHB and PHY Synchronous (AhbPhySync) + Indicates whether AHB and PHY clocks are synchronous to + each other. + * 1'b0: No + * 1'b1: Yes + This bit is tied to 1. */ + uint32_t rsttype : 1; /**< Reset Style for Clocked always Blocks in RTL (RstType) + * 1'b0: Asynchronous reset is used in the core + * 1'b1: Synchronous reset is used in the core */ + uint32_t optfeature : 1; /**< Optional Features Removed (OptFeature) + Indicates whether the User ID register, GPIO interface ports, + and SOF toggle and counter ports were removed for gate count + optimization. */ + uint32_t vendor_control_interface_support : 1;/**< Vendor Control Interface Support + * 1'b0: Vendor Control Interface is not available on the core. + * 1'b1: Vendor Control Interface is available. */ + uint32_t i2c_selection : 1; /**< I2C Selection + * 1'b0: I2C Interface is not available on the core. + * 1'b1: I2C Interface is available on the core. */ + uint32_t otgen : 1; /**< OTG Function Enabled (OtgEn) + The application uses this bit to indicate the O2P USB core's + OTG capabilities. + * 1'b0: Not OTG capable + * 1'b1: OTG Capable */ + uint32_t pktsizewidth : 3; /**< Width of Packet Size Counters (PktSizeWidth) + * 3'b000: 4 bits + * 3'b001: 5 bits + * 3'b010: 6 bits + * 3'b011: 7 bits + * 3'b100: 8 bits + * 3'b101: 9 bits + * 3'b110: 10 bits + * Others: Reserved */ + uint32_t xfersizewidth : 4; /**< Width of Transfer Size Counters (XferSizeWidth) + * 4'b0000: 11 bits + * 4'b0001: 12 bits + - ... + * 4'b1000: 19 bits + * Others: Reserved */ +#else + uint32_t xfersizewidth : 4; + uint32_t pktsizewidth : 3; + uint32_t otgen : 1; + uint32_t i2c_selection : 1; + uint32_t vendor_control_interface_support : 1; + uint32_t optfeature : 1; + uint32_t rsttype : 1; + uint32_t ahbphysync : 1; + uint32_t reserved_13_15 : 3; + uint32_t dfifodepth : 16; +#endif + } s; + struct cvmx_usbcx_ghwcfg3_s cn30xx; + struct cvmx_usbcx_ghwcfg3_s cn31xx; + struct cvmx_usbcx_ghwcfg3_s cn50xx; + struct cvmx_usbcx_ghwcfg3_s cn52xx; + struct cvmx_usbcx_ghwcfg3_s cn52xxp1; + struct cvmx_usbcx_ghwcfg3_s cn56xx; + struct cvmx_usbcx_ghwcfg3_s cn56xxp1; +}; +typedef union cvmx_usbcx_ghwcfg3 cvmx_usbcx_ghwcfg3_t; + +/** + * cvmx_usbc#_ghwcfg4 + * + * User HW Config4 Register (GHWCFG4) + * + * This register contains the configuration options of the O2P USB core. + */ +union cvmx_usbcx_ghwcfg4 +{ + uint32_t u32; + struct cvmx_usbcx_ghwcfg4_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_30_31 : 2; + uint32_t numdevmodinend : 4; /**< Enable dedicatd transmit FIFO for device IN endpoints. */ + uint32_t endedtrfifo : 1; /**< Enable dedicatd transmit FIFO for device IN endpoints. */ + uint32_t sessendfltr : 1; /**< "session_end" Filter Enabled (SessEndFltr) + * 1'b0: No filter + * 1'b1: Filter */ + uint32_t bvalidfltr : 1; /**< "b_valid" Filter Enabled (BValidFltr) + * 1'b0: No filter + * 1'b1: Filter */ + uint32_t avalidfltr : 1; /**< "a_valid" Filter Enabled (AValidFltr) + * 1'b0: No filter + * 1'b1: Filter */ + uint32_t vbusvalidfltr : 1; /**< "vbus_valid" Filter Enabled (VBusValidFltr) + * 1'b0: No filter + * 1'b1: Filter */ + uint32_t iddgfltr : 1; /**< "iddig" Filter Enable (IddgFltr) + * 1'b0: No filter + * 1'b1: Filter */ + uint32_t numctleps : 4; /**< Number of Device Mode Control Endpoints in Addition to + Endpoint 0 (NumCtlEps) + Range: 1-15 */ + uint32_t phydatawidth : 2; /**< UTMI+ PHY/ULPI-to-Internal UTMI+ Wrapper Data Width + (PhyDataWidth) + When a ULPI PHY is used, an internal wrapper converts ULPI + to UTMI+. + * 2'b00: 8 bits + * 2'b01: 16 bits + * 2'b10: 8/16 bits, software selectable + * Others: Reserved */ + uint32_t reserved_6_13 : 8; + uint32_t ahbfreq : 1; /**< Minimum AHB Frequency Less Than 60 MHz (AhbFreq) + * 1'b0: No + * 1'b1: Yes */ + uint32_t enablepwropt : 1; /**< Enable Power Optimization? (EnablePwrOpt) + * 1'b0: No + * 1'b1: Yes */ + uint32_t numdevperioeps : 4; /**< Number of Device Mode Periodic IN Endpoints + (NumDevPerioEps) + Range: 0-15 */ +#else + uint32_t numdevperioeps : 4; + uint32_t enablepwropt : 1; + uint32_t ahbfreq : 1; + uint32_t reserved_6_13 : 8; + uint32_t phydatawidth : 2; + uint32_t numctleps : 4; + uint32_t iddgfltr : 1; + uint32_t vbusvalidfltr : 1; + uint32_t avalidfltr : 1; + uint32_t bvalidfltr : 1; + uint32_t sessendfltr : 1; + uint32_t endedtrfifo : 1; + uint32_t numdevmodinend : 4; + uint32_t reserved_30_31 : 2; +#endif + } s; + struct cvmx_usbcx_ghwcfg4_cn30xx + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_25_31 : 7; + uint32_t sessendfltr : 1; /**< "session_end" Filter Enabled (SessEndFltr) + * 1'b0: No filter + * 1'b1: Filter */ + uint32_t bvalidfltr : 1; /**< "b_valid" Filter Enabled (BValidFltr) + * 1'b0: No filter + * 1'b1: Filter */ + uint32_t avalidfltr : 1; /**< "a_valid" Filter Enabled (AValidFltr) + * 1'b0: No filter + * 1'b1: Filter */ + uint32_t vbusvalidfltr : 1; /**< "vbus_valid" Filter Enabled (VBusValidFltr) + * 1'b0: No filter + * 1'b1: Filter */ + uint32_t iddgfltr : 1; /**< "iddig" Filter Enable (IddgFltr) + * 1'b0: No filter + * 1'b1: Filter */ + uint32_t numctleps : 4; /**< Number of Device Mode Control Endpoints in Addition to + Endpoint 0 (NumCtlEps) + Range: 1-15 */ + uint32_t phydatawidth : 2; /**< UTMI+ PHY/ULPI-to-Internal UTMI+ Wrapper Data Width + (PhyDataWidth) + When a ULPI PHY is used, an internal wrapper converts ULPI + to UTMI+. + * 2'b00: 8 bits + * 2'b01: 16 bits + * 2'b10: 8/16 bits, software selectable + * Others: Reserved */ + uint32_t reserved_6_13 : 8; + uint32_t ahbfreq : 1; /**< Minimum AHB Frequency Less Than 60 MHz (AhbFreq) + * 1'b0: No + * 1'b1: Yes */ + uint32_t enablepwropt : 1; /**< Enable Power Optimization? (EnablePwrOpt) + * 1'b0: No + * 1'b1: Yes */ + uint32_t numdevperioeps : 4; /**< Number of Device Mode Periodic IN Endpoints + (NumDevPerioEps) + Range: 0-15 */ +#else + uint32_t numdevperioeps : 4; + uint32_t enablepwropt : 1; + uint32_t ahbfreq : 1; + uint32_t reserved_6_13 : 8; + uint32_t phydatawidth : 2; + uint32_t numctleps : 4; + uint32_t iddgfltr : 1; + uint32_t vbusvalidfltr : 1; + uint32_t avalidfltr : 1; + uint32_t bvalidfltr : 1; + uint32_t sessendfltr : 1; + uint32_t reserved_25_31 : 7; +#endif + } cn30xx; + struct cvmx_usbcx_ghwcfg4_cn30xx cn31xx; + struct cvmx_usbcx_ghwcfg4_s cn50xx; + struct cvmx_usbcx_ghwcfg4_s cn52xx; + struct cvmx_usbcx_ghwcfg4_s cn52xxp1; + struct cvmx_usbcx_ghwcfg4_s cn56xx; + struct cvmx_usbcx_ghwcfg4_s cn56xxp1; +}; +typedef union cvmx_usbcx_ghwcfg4 cvmx_usbcx_ghwcfg4_t; + +/** + * cvmx_usbc#_gintmsk + * + * Core Interrupt Mask Register (GINTMSK) + * + * This register works with the Core Interrupt register to interrupt the application. + * When an interrupt bit is masked, the interrupt associated with that bit will not be generated. + * However, the Core Interrupt (GINTSTS) register bit corresponding to that interrupt will still be set. + * Mask interrupt: 1'b0, Unmask interrupt: 1'b1 + */ +union cvmx_usbcx_gintmsk +{ + uint32_t u32; + struct cvmx_usbcx_gintmsk_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t wkupintmsk : 1; /**< Resume/Remote Wakeup Detected Interrupt Mask + (WkUpIntMsk) */ + uint32_t sessreqintmsk : 1; /**< Session Request/New Session Detected Interrupt Mask + (SessReqIntMsk) */ + uint32_t disconnintmsk : 1; /**< Disconnect Detected Interrupt Mask (DisconnIntMsk) */ + uint32_t conidstschngmsk : 1; /**< Connector ID Status Change Mask (ConIDStsChngMsk) */ + uint32_t reserved_27_27 : 1; + uint32_t ptxfempmsk : 1; /**< Periodic TxFIFO Empty Mask (PTxFEmpMsk) */ + uint32_t hchintmsk : 1; /**< Host Channels Interrupt Mask (HChIntMsk) */ + uint32_t prtintmsk : 1; /**< Host Port Interrupt Mask (PrtIntMsk) */ + uint32_t reserved_23_23 : 1; + uint32_t fetsuspmsk : 1; /**< Data Fetch Suspended Mask (FetSuspMsk) */ + uint32_t incomplpmsk : 1; /**< Incomplete Periodic Transfer Mask (incomplPMsk) + Incomplete Isochronous OUT Transfer Mask + (incompISOOUTMsk) */ + uint32_t incompisoinmsk : 1; /**< Incomplete Isochronous IN Transfer Mask (incompISOINMsk) */ + uint32_t oepintmsk : 1; /**< OUT Endpoints Interrupt Mask (OEPIntMsk) */ + uint32_t inepintmsk : 1; /**< IN Endpoints Interrupt Mask (INEPIntMsk) */ + uint32_t epmismsk : 1; /**< Endpoint Mismatch Interrupt Mask (EPMisMsk) */ + uint32_t reserved_16_16 : 1; + uint32_t eopfmsk : 1; /**< End of Periodic Frame Interrupt Mask (EOPFMsk) */ + uint32_t isooutdropmsk : 1; /**< Isochronous OUT Packet Dropped Interrupt Mask + (ISOOutDropMsk) */ + uint32_t enumdonemsk : 1; /**< Enumeration Done Mask (EnumDoneMsk) */ + uint32_t usbrstmsk : 1; /**< USB Reset Mask (USBRstMsk) */ + uint32_t usbsuspmsk : 1; /**< USB Suspend Mask (USBSuspMsk) */ + uint32_t erlysuspmsk : 1; /**< Early Suspend Mask (ErlySuspMsk) */ + uint32_t i2cint : 1; /**< I2C Interrupt Mask (I2CINT) */ + uint32_t ulpickintmsk : 1; /**< ULPI Carkit Interrupt Mask (ULPICKINTMsk) + I2C Carkit Interrupt Mask (I2CCKINTMsk) */ + uint32_t goutnakeffmsk : 1; /**< Global OUT NAK Effective Mask (GOUTNakEffMsk) */ + uint32_t ginnakeffmsk : 1; /**< Global Non-Periodic IN NAK Effective Mask (GINNakEffMsk) */ + uint32_t nptxfempmsk : 1; /**< Non-Periodic TxFIFO Empty Mask (NPTxFEmpMsk) */ + uint32_t rxflvlmsk : 1; /**< Receive FIFO Non-Empty Mask (RxFLvlMsk) */ + uint32_t sofmsk : 1; /**< Start of (micro)Frame Mask (SofMsk) */ + uint32_t otgintmsk : 1; /**< OTG Interrupt Mask (OTGIntMsk) */ + uint32_t modemismsk : 1; /**< Mode Mismatch Interrupt Mask (ModeMisMsk) */ + uint32_t reserved_0_0 : 1; +#else + uint32_t reserved_0_0 : 1; + uint32_t modemismsk : 1; + uint32_t otgintmsk : 1; + uint32_t sofmsk : 1; + uint32_t rxflvlmsk : 1; + uint32_t nptxfempmsk : 1; + uint32_t ginnakeffmsk : 1; + uint32_t goutnakeffmsk : 1; + uint32_t ulpickintmsk : 1; + uint32_t i2cint : 1; + uint32_t erlysuspmsk : 1; + uint32_t usbsuspmsk : 1; + uint32_t usbrstmsk : 1; + uint32_t enumdonemsk : 1; + uint32_t isooutdropmsk : 1; + uint32_t eopfmsk : 1; + uint32_t reserved_16_16 : 1; + uint32_t epmismsk : 1; + uint32_t inepintmsk : 1; + uint32_t oepintmsk : 1; + uint32_t incompisoinmsk : 1; + uint32_t incomplpmsk : 1; + uint32_t fetsuspmsk : 1; + uint32_t reserved_23_23 : 1; + uint32_t prtintmsk : 1; + uint32_t hchintmsk : 1; + uint32_t ptxfempmsk : 1; + uint32_t reserved_27_27 : 1; + uint32_t conidstschngmsk : 1; + uint32_t disconnintmsk : 1; + uint32_t sessreqintmsk : 1; + uint32_t wkupintmsk : 1; +#endif + } s; + struct cvmx_usbcx_gintmsk_s cn30xx; + struct cvmx_usbcx_gintmsk_s cn31xx; + struct cvmx_usbcx_gintmsk_s cn50xx; + struct cvmx_usbcx_gintmsk_s cn52xx; + struct cvmx_usbcx_gintmsk_s cn52xxp1; + struct cvmx_usbcx_gintmsk_s cn56xx; + struct cvmx_usbcx_gintmsk_s cn56xxp1; +}; +typedef union cvmx_usbcx_gintmsk cvmx_usbcx_gintmsk_t; + +/** + * cvmx_usbc#_gintsts + * + * Core Interrupt Register (GINTSTS) + * + * This register interrupts the application for system-level events in the current mode of operation + * (Device mode or Host mode). It is shown in Interrupt. Some of the bits in this register are valid only in Host mode, + * while others are valid in Device mode only. This register also indicates the current mode of operation. + * In order to clear the interrupt status bits of type R_SS_WC, the application must write 1'b1 into the bit. + * The FIFO status interrupts are read only; once software reads from or writes to the FIFO while servicing these + * interrupts, FIFO interrupt conditions are cleared automatically. + */ +union cvmx_usbcx_gintsts +{ + uint32_t u32; + struct cvmx_usbcx_gintsts_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t wkupint : 1; /**< Resume/Remote Wakeup Detected Interrupt (WkUpInt) + In Device mode, this interrupt is asserted when a resume is + detected on the USB. In Host mode, this interrupt is asserted + when a remote wakeup is detected on the USB. + For more information on how to use this interrupt, see "Partial + Power-Down and Clock Gating Programming Model" on + page 353. */ + uint32_t sessreqint : 1; /**< Session Request/New Session Detected Interrupt (SessReqInt) + In Host mode, this interrupt is asserted when a session request + is detected from the device. In Device mode, this interrupt is + asserted when the utmiotg_bvalid signal goes high. + For more information on how to use this interrupt, see "Partial + Power-Down and Clock Gating Programming Model" on + page 353. */ + uint32_t disconnint : 1; /**< Disconnect Detected Interrupt (DisconnInt) + Asserted when a device disconnect is detected. */ + uint32_t conidstschng : 1; /**< Connector ID Status Change (ConIDStsChng) + The core sets this bit when there is a change in connector ID + status. */ + uint32_t reserved_27_27 : 1; + uint32_t ptxfemp : 1; /**< Periodic TxFIFO Empty (PTxFEmp) + Asserted when the Periodic Transmit FIFO is either half or + completely empty and there is space for at least one entry to be + written in the Periodic Request Queue. The half or completely + empty status is determined by the Periodic TxFIFO Empty Level + bit in the Core AHB Configuration register + (GAHBCFG.PTxFEmpLvl). */ + uint32_t hchint : 1; /**< Host Channels Interrupt (HChInt) + The core sets this bit to indicate that an interrupt is pending on + one of the channels of the core (in Host mode). The application + must read the Host All Channels Interrupt (HAINT) register to + determine the exact number of the channel on which the + interrupt occurred, and then read the corresponding Host + Channel-n Interrupt (HCINTn) register to determine the exact + cause of the interrupt. The application must clear the + appropriate status bit in the HCINTn register to clear this bit. */ + uint32_t prtint : 1; /**< Host Port Interrupt (PrtInt) + The core sets this bit to indicate a change in port status of one + of the O2P USB core ports in Host mode. The application must + read the Host Port Control and Status (HPRT) register to + determine the exact event that caused this interrupt. The + application must clear the appropriate status bit in the Host Port + Control and Status register to clear this bit. */ + uint32_t reserved_23_23 : 1; + uint32_t fetsusp : 1; /**< Data Fetch Suspended (FetSusp) + This interrupt is valid only in DMA mode. This interrupt indicates + that the core has stopped fetching data for IN endpoints due to + the unavailability of TxFIFO space or Request Queue space. + This interrupt is used by the application for an endpoint + mismatch algorithm. */ + uint32_t incomplp : 1; /**< Incomplete Periodic Transfer (incomplP) + In Host mode, the core sets this interrupt bit when there are + incomplete periodic transactions still pending which are + scheduled for the current microframe. + Incomplete Isochronous OUT Transfer (incompISOOUT) + The Device mode, the core sets this interrupt to indicate that + there is at least one isochronous OUT endpoint on which the + transfer is not completed in the current microframe. This + interrupt is asserted along with the End of Periodic Frame + Interrupt (EOPF) bit in this register. */ + uint32_t incompisoin : 1; /**< Incomplete Isochronous IN Transfer (incompISOIN) + The core sets this interrupt to indicate that there is at least one + isochronous IN endpoint on which the transfer is not completed + in the current microframe. This interrupt is asserted along with + the End of Periodic Frame Interrupt (EOPF) bit in this register. */ + uint32_t oepint : 1; /**< OUT Endpoints Interrupt (OEPInt) + The core sets this bit to indicate that an interrupt is pending on + one of the OUT endpoints of the core (in Device mode). The + application must read the Device All Endpoints Interrupt + (DAINT) register to determine the exact number of the OUT + endpoint on which the interrupt occurred, and then read the + corresponding Device OUT Endpoint-n Interrupt (DOEPINTn) + register to determine the exact cause of the interrupt. The + application must clear the appropriate status bit in the + corresponding DOEPINTn register to clear this bit. */ + uint32_t iepint : 1; /**< IN Endpoints Interrupt (IEPInt) + The core sets this bit to indicate that an interrupt is pending on + one of the IN endpoints of the core (in Device mode). The + application must read the Device All Endpoints Interrupt + (DAINT) register to determine the exact number of the IN + endpoint on which the interrupt occurred, and then read the + corresponding Device IN Endpoint-n Interrupt (DIEPINTn) + register to determine the exact cause of the interrupt. The + application must clear the appropriate status bit in the + corresponding DIEPINTn register to clear this bit. */ + uint32_t epmis : 1; /**< Endpoint Mismatch Interrupt (EPMis) + Indicates that an IN token has been received for a non-periodic + endpoint, but the data for another endpoint is present in the top + of the Non-Periodic Transmit FIFO and the IN endpoint + mismatch count programmed by the application has expired. */ + uint32_t reserved_16_16 : 1; + uint32_t eopf : 1; /**< End of Periodic Frame Interrupt (EOPF) + Indicates that the period specified in the Periodic Frame Interval + field of the Device Configuration register (DCFG.PerFrInt) has + been reached in the current microframe. */ + uint32_t isooutdrop : 1; /**< Isochronous OUT Packet Dropped Interrupt (ISOOutDrop) + The core sets this bit when it fails to write an isochronous OUT + packet into the RxFIFO because the RxFIFO doesn't have + enough space to accommodate a maximum packet size packet + for the isochronous OUT endpoint. */ + uint32_t enumdone : 1; /**< Enumeration Done (EnumDone) + The core sets this bit to indicate that speed enumeration is + complete. The application must read the Device Status (DSTS) + register to obtain the enumerated speed. */ + uint32_t usbrst : 1; /**< USB Reset (USBRst) + The core sets this bit to indicate that a reset is detected on the + USB. */ + uint32_t usbsusp : 1; /**< USB Suspend (USBSusp) + The core sets this bit to indicate that a suspend was detected + on the USB. The core enters the Suspended state when there + is no activity on the phy_line_state_i signal for an extended + period of time. */ + uint32_t erlysusp : 1; /**< Early Suspend (ErlySusp) + The core sets this bit to indicate that an Idle state has been + detected on the USB for 3 ms. */ + uint32_t i2cint : 1; /**< I2C Interrupt (I2CINT) + This bit is always 0x0. */ + uint32_t ulpickint : 1; /**< ULPI Carkit Interrupt (ULPICKINT) + This bit is always 0x0. */ + uint32_t goutnakeff : 1; /**< Global OUT NAK Effective (GOUTNakEff) + Indicates that the Set Global OUT NAK bit in the Device Control + register (DCTL.SGOUTNak), set by the application, has taken + effect in the core. This bit can be cleared by writing the Clear + Global OUT NAK bit in the Device Control register + (DCTL.CGOUTNak). */ + uint32_t ginnakeff : 1; /**< Global IN Non-Periodic NAK Effective (GINNakEff) + Indicates that the Set Global Non-Periodic IN NAK bit in the + Device Control register (DCTL.SGNPInNak), set by the + application, has taken effect in the core. That is, the core has + sampled the Global IN NAK bit set by the application. This bit + can be cleared by clearing the Clear Global Non-Periodic IN + NAK bit in the Device Control register (DCTL.CGNPInNak). + This interrupt does not necessarily mean that a NAK handshake + is sent out on the USB. The STALL bit takes precedence over + the NAK bit. */ + uint32_t nptxfemp : 1; /**< Non-Periodic TxFIFO Empty (NPTxFEmp) + This interrupt is asserted when the Non-Periodic TxFIFO is + either half or completely empty, and there is space for at least + one entry to be written to the Non-Periodic Transmit Request + Queue. The half or completely empty status is determined by + the Non-Periodic TxFIFO Empty Level bit in the Core AHB + Configuration register (GAHBCFG.NPTxFEmpLvl). */ + uint32_t rxflvl : 1; /**< RxFIFO Non-Empty (RxFLvl) + Indicates that there is at least one packet pending to be read + from the RxFIFO. */ + uint32_t sof : 1; /**< Start of (micro)Frame (Sof) + In Host mode, the core sets this bit to indicate that an SOF + (FS), micro-SOF (HS), or Keep-Alive (LS) is transmitted on the + USB. The application must write a 1 to this bit to clear the + interrupt. + In Device mode, in the core sets this bit to indicate that an SOF + token has been received on the USB. The application can read + the Device Status register to get the current (micro)frame + number. This interrupt is seen only when the core is operating + at either HS or FS. */ + uint32_t otgint : 1; /**< OTG Interrupt (OTGInt) + The core sets this bit to indicate an OTG protocol event. The + application must read the OTG Interrupt Status (GOTGINT) + register to determine the exact event that caused this interrupt. + The application must clear the appropriate status bit in the + GOTGINT register to clear this bit. */ + uint32_t modemis : 1; /**< Mode Mismatch Interrupt (ModeMis) + The core sets this bit when the application is trying to access: + * A Host mode register, when the core is operating in Device + mode + * A Device mode register, when the core is operating in Host + mode + The register access is completed on the AHB with an OKAY + response, but is ignored by the core internally and doesn't + affect the operation of the core. */ + uint32_t curmod : 1; /**< Current Mode of Operation (CurMod) + Indicates the current mode of operation. + * 1'b0: Device mode + * 1'b1: Host mode */ +#else + uint32_t curmod : 1; + uint32_t modemis : 1; + uint32_t otgint : 1; + uint32_t sof : 1; + uint32_t rxflvl : 1; + uint32_t nptxfemp : 1; + uint32_t ginnakeff : 1; + uint32_t goutnakeff : 1; + uint32_t ulpickint : 1; + uint32_t i2cint : 1; + uint32_t erlysusp : 1; + uint32_t usbsusp : 1; + uint32_t usbrst : 1; + uint32_t enumdone : 1; + uint32_t isooutdrop : 1; + uint32_t eopf : 1; + uint32_t reserved_16_16 : 1; + uint32_t epmis : 1; + uint32_t iepint : 1; + uint32_t oepint : 1; + uint32_t incompisoin : 1; + uint32_t incomplp : 1; + uint32_t fetsusp : 1; + uint32_t reserved_23_23 : 1; + uint32_t prtint : 1; + uint32_t hchint : 1; + uint32_t ptxfemp : 1; + uint32_t reserved_27_27 : 1; + uint32_t conidstschng : 1; + uint32_t disconnint : 1; + uint32_t sessreqint : 1; + uint32_t wkupint : 1; +#endif + } s; + struct cvmx_usbcx_gintsts_s cn30xx; + struct cvmx_usbcx_gintsts_s cn31xx; + struct cvmx_usbcx_gintsts_s cn50xx; + struct cvmx_usbcx_gintsts_s cn52xx; + struct cvmx_usbcx_gintsts_s cn52xxp1; + struct cvmx_usbcx_gintsts_s cn56xx; + struct cvmx_usbcx_gintsts_s cn56xxp1; +}; +typedef union cvmx_usbcx_gintsts cvmx_usbcx_gintsts_t; + +/** + * cvmx_usbc#_gnptxfsiz + * + * Non-Periodic Transmit FIFO Size Register (GNPTXFSIZ) + * + * The application can program the RAM size and the memory start address for the Non-Periodic TxFIFO. + */ +union cvmx_usbcx_gnptxfsiz +{ + uint32_t u32; + struct cvmx_usbcx_gnptxfsiz_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t nptxfdep : 16; /**< Non-Periodic TxFIFO Depth (NPTxFDep) + This value is in terms of 32-bit words. + Minimum value is 16 + Maximum value is 32768 */ + uint32_t nptxfstaddr : 16; /**< Non-Periodic Transmit RAM Start Address (NPTxFStAddr) + This field contains the memory start address for Non-Periodic + Transmit FIFO RAM. */ +#else + uint32_t nptxfstaddr : 16; + uint32_t nptxfdep : 16; +#endif + } s; + struct cvmx_usbcx_gnptxfsiz_s cn30xx; + struct cvmx_usbcx_gnptxfsiz_s cn31xx; + struct cvmx_usbcx_gnptxfsiz_s cn50xx; + struct cvmx_usbcx_gnptxfsiz_s cn52xx; + struct cvmx_usbcx_gnptxfsiz_s cn52xxp1; + struct cvmx_usbcx_gnptxfsiz_s cn56xx; + struct cvmx_usbcx_gnptxfsiz_s cn56xxp1; +}; +typedef union cvmx_usbcx_gnptxfsiz cvmx_usbcx_gnptxfsiz_t; + +/** + * cvmx_usbc#_gnptxsts + * + * Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS) + * + * This read-only register contains the free space information for the Non-Periodic TxFIFO and + * the Non-Periodic Transmit Request Queue + */ +union cvmx_usbcx_gnptxsts +{ + uint32_t u32; + struct cvmx_usbcx_gnptxsts_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_31_31 : 1; + uint32_t nptxqtop : 7; /**< Top of the Non-Periodic Transmit Request Queue (NPTxQTop) + Entry in the Non-Periodic Tx Request Queue that is currently + being processed by the MAC. + * Bits [30:27]: Channel/endpoint number + * Bits [26:25]: + - 2'b00: IN/OUT token + - 2'b01: Zero-length transmit packet (device IN/host OUT) + - 2'b10: PING/CSPLIT token + - 2'b11: Channel halt command + * Bit [24]: Terminate (last entry for selected channel/endpoint) */ + uint32_t nptxqspcavail : 8; /**< Non-Periodic Transmit Request Queue Space Available + (NPTxQSpcAvail) + Indicates the amount of free space available in the Non- + Periodic Transmit Request Queue. This queue holds both IN + and OUT requests in Host mode. Device mode has only IN + requests. + * 8'h0: Non-Periodic Transmit Request Queue is full + * 8'h1: 1 location available + * 8'h2: 2 locations available + * n: n locations available (0..8) + * Others: Reserved */ + uint32_t nptxfspcavail : 16; /**< Non-Periodic TxFIFO Space Avail (NPTxFSpcAvail) + Indicates the amount of free space available in the Non- + Periodic TxFIFO. + Values are in terms of 32-bit words. + * 16'h0: Non-Periodic TxFIFO is full + * 16'h1: 1 word available + * 16'h2: 2 words available + * 16'hn: n words available (where 0..32768) + * 16'h8000: 32768 words available + * Others: Reserved */ +#else + uint32_t nptxfspcavail : 16; + uint32_t nptxqspcavail : 8; + uint32_t nptxqtop : 7; + uint32_t reserved_31_31 : 1; +#endif + } s; + struct cvmx_usbcx_gnptxsts_s cn30xx; + struct cvmx_usbcx_gnptxsts_s cn31xx; + struct cvmx_usbcx_gnptxsts_s cn50xx; + struct cvmx_usbcx_gnptxsts_s cn52xx; + struct cvmx_usbcx_gnptxsts_s cn52xxp1; + struct cvmx_usbcx_gnptxsts_s cn56xx; + struct cvmx_usbcx_gnptxsts_s cn56xxp1; +}; +typedef union cvmx_usbcx_gnptxsts cvmx_usbcx_gnptxsts_t; + +/** + * cvmx_usbc#_gotgctl + * + * OTG Control and Status Register (GOTGCTL) + * + * The OTG Control and Status register controls the behavior and reflects the status of the OTG function of the core.: + */ +union cvmx_usbcx_gotgctl +{ + uint32_t u32; + struct cvmx_usbcx_gotgctl_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_20_31 : 12; + uint32_t bsesvld : 1; /**< B-Session Valid (BSesVld) + Valid only when O2P USB core is configured as a USB device. + Indicates the Device mode transceiver status. + * 1'b0: B-session is not valid. + * 1'b1: B-session is valid. */ + uint32_t asesvld : 1; /**< A-Session Valid (ASesVld) + Valid only when O2P USB core is configured as a USB host. + Indicates the Host mode transceiver status. + * 1'b0: A-session is not valid + * 1'b1: A-session is valid */ + uint32_t dbnctime : 1; /**< Long/Short Debounce Time (DbncTime) + In the present version of the core this bit will only read as '0'. */ + uint32_t conidsts : 1; /**< Connector ID Status (ConIDSts) + Indicates the connector ID status on a connect event. + * 1'b0: The O2P USB core is in A-device mode + * 1'b1: The O2P USB core is in B-device mode */ + uint32_t reserved_12_15 : 4; + uint32_t devhnpen : 1; /**< Device HNP Enabled (DevHNPEn) + Since O2P USB core is not HNP capable this bit is 0x0. */ + uint32_t hstsethnpen : 1; /**< Host Set HNP Enable (HstSetHNPEn) + Since O2P USB core is not HNP capable this bit is 0x0. */ + uint32_t hnpreq : 1; /**< HNP Request (HNPReq) + Since O2P USB core is not HNP capable this bit is 0x0. */ + uint32_t hstnegscs : 1; /**< Host Negotiation Success (HstNegScs) + Since O2P USB core is not HNP capable this bit is 0x0. */ + uint32_t reserved_2_7 : 6; + uint32_t sesreq : 1; /**< Session Request (SesReq) + Since O2P USB core is not SRP capable this bit is 0x0. */ + uint32_t sesreqscs : 1; /**< Session Request Success (SesReqScs) + Since O2P USB core is not SRP capable this bit is 0x0. */ +#else + uint32_t sesreqscs : 1; + uint32_t sesreq : 1; + uint32_t reserved_2_7 : 6; + uint32_t hstnegscs : 1; + uint32_t hnpreq : 1; + uint32_t hstsethnpen : 1; + uint32_t devhnpen : 1; + uint32_t reserved_12_15 : 4; + uint32_t conidsts : 1; + uint32_t dbnctime : 1; + uint32_t asesvld : 1; + uint32_t bsesvld : 1; + uint32_t reserved_20_31 : 12; +#endif + } s; + struct cvmx_usbcx_gotgctl_s cn30xx; + struct cvmx_usbcx_gotgctl_s cn31xx; + struct cvmx_usbcx_gotgctl_s cn50xx; + struct cvmx_usbcx_gotgctl_s cn52xx; + struct cvmx_usbcx_gotgctl_s cn52xxp1; + struct cvmx_usbcx_gotgctl_s cn56xx; + struct cvmx_usbcx_gotgctl_s cn56xxp1; +}; +typedef union cvmx_usbcx_gotgctl cvmx_usbcx_gotgctl_t; + +/** + * cvmx_usbc#_gotgint + * + * OTG Interrupt Register (GOTGINT) + * + * The application reads this register whenever there is an OTG interrupt and clears the bits in this register + * to clear the OTG interrupt. It is shown in Interrupt .: + */ +union cvmx_usbcx_gotgint +{ + uint32_t u32; + struct cvmx_usbcx_gotgint_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_20_31 : 12; + uint32_t dbncedone : 1; /**< Debounce Done (DbnceDone) + In the present version of the code this bit is tied to '0'. */ + uint32_t adevtoutchg : 1; /**< A-Device Timeout Change (ADevTOUTChg) + Since O2P USB core is not HNP or SRP capable this bit is always 0x0. */ + uint32_t hstnegdet : 1; /**< Host Negotiation Detected (HstNegDet) + Since O2P USB core is not HNP or SRP capable this bit is always 0x0. */ + uint32_t reserved_10_16 : 7; + uint32_t hstnegsucstschng : 1; /**< Host Negotiation Success Status Change (HstNegSucStsChng) + Since O2P USB core is not HNP or SRP capable this bit is always 0x0. */ + uint32_t sesreqsucstschng : 1; /**< Session Request Success Status Change + Since O2P USB core is not HNP or SRP capable this bit is always 0x0. */ + uint32_t reserved_3_7 : 5; + uint32_t sesenddet : 1; /**< Session End Detected (SesEndDet) + Since O2P USB core is not HNP or SRP capable this bit is always 0x0. */ + uint32_t reserved_0_1 : 2; +#else + uint32_t reserved_0_1 : 2; + uint32_t sesenddet : 1; + uint32_t reserved_3_7 : 5; + uint32_t sesreqsucstschng : 1; + uint32_t hstnegsucstschng : 1; + uint32_t reserved_10_16 : 7; + uint32_t hstnegdet : 1; + uint32_t adevtoutchg : 1; + uint32_t dbncedone : 1; + uint32_t reserved_20_31 : 12; +#endif + } s; + struct cvmx_usbcx_gotgint_s cn30xx; + struct cvmx_usbcx_gotgint_s cn31xx; + struct cvmx_usbcx_gotgint_s cn50xx; + struct cvmx_usbcx_gotgint_s cn52xx; + struct cvmx_usbcx_gotgint_s cn52xxp1; + struct cvmx_usbcx_gotgint_s cn56xx; + struct cvmx_usbcx_gotgint_s cn56xxp1; +}; +typedef union cvmx_usbcx_gotgint cvmx_usbcx_gotgint_t; + +/** + * cvmx_usbc#_grstctl + * + * Core Reset Register (GRSTCTL) + * + * The application uses this register to reset various hardware features inside the core. + */ +union cvmx_usbcx_grstctl +{ + uint32_t u32; + struct cvmx_usbcx_grstctl_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t ahbidle : 1; /**< AHB Master Idle (AHBIdle) + Indicates that the AHB Master State Machine is in the IDLE + condition. */ + uint32_t dmareq : 1; /**< DMA Request Signal (DMAReq) + Indicates that the DMA request is in progress. Used for debug. */ + uint32_t reserved_11_29 : 19; + uint32_t txfnum : 5; /**< TxFIFO Number (TxFNum) + This is the FIFO number that must be flushed using the TxFIFO + Flush bit. This field must not be changed until the core clears + the TxFIFO Flush bit. + * 5'h0: Non-Periodic TxFIFO flush + * 5'h1: Periodic TxFIFO 1 flush in Device mode or Periodic + TxFIFO flush in Host mode + * 5'h2: Periodic TxFIFO 2 flush in Device mode + - ... + * 5'hF: Periodic TxFIFO 15 flush in Device mode + * 5'h10: Flush all the Periodic and Non-Periodic TxFIFOs in the + core */ + uint32_t txfflsh : 1; /**< TxFIFO Flush (TxFFlsh) + This bit selectively flushes a single or all transmit FIFOs, but + cannot do so if the core is in the midst of a transaction. + The application must only write this bit after checking that the + core is neither writing to the TxFIFO nor reading from the + TxFIFO. + The application must wait until the core clears this bit before + performing any operations. This bit takes 8 clocks (of phy_clk or + hclk, whichever is slower) to clear. */ + uint32_t rxfflsh : 1; /**< RxFIFO Flush (RxFFlsh) + The application can flush the entire RxFIFO using this bit, but + must first ensure that the core is not in the middle of a + transaction. + The application must only write to this bit after checking that the + core is neither reading from the RxFIFO nor writing to the + RxFIFO. + The application must wait until the bit is cleared before + performing any other operations. This bit will take 8 clocks + (slowest of PHY or AHB clock) to clear. */ + uint32_t intknqflsh : 1; /**< IN Token Sequence Learning Queue Flush (INTknQFlsh) + The application writes this bit to flush the IN Token Sequence + Learning Queue. */ + uint32_t frmcntrrst : 1; /**< Host Frame Counter Reset (FrmCntrRst) + The application writes this bit to reset the (micro)frame number + counter inside the core. When the (micro)frame counter is reset, + the subsequent SOF sent out by the core will have a + (micro)frame number of 0. */ + uint32_t hsftrst : 1; /**< HClk Soft Reset (HSftRst) + The application uses this bit to flush the control logic in the AHB + Clock domain. Only AHB Clock Domain pipelines are reset. + * FIFOs are not flushed with this bit. + * All state machines in the AHB clock domain are reset to the + Idle state after terminating the transactions on the AHB, + following the protocol. + * CSR control bits used by the AHB clock domain state + machines are cleared. + * To clear this interrupt, status mask bits that control the + interrupt status and are generated by the AHB clock domain + state machine are cleared. + * Because interrupt status bits are not cleared, the application + can get the status of any core events that occurred after it set + this bit. + This is a self-clearing bit that the core clears after all necessary + logic is reset in the core. This may take several clocks, + depending on the core's current state. */ + uint32_t csftrst : 1; /**< Core Soft Reset (CSftRst) + Resets the hclk and phy_clock domains as follows: + * Clears the interrupts and all the CSR registers except the + following register bits: + - PCGCCTL.RstPdwnModule + - PCGCCTL.GateHclk + - PCGCCTL.PwrClmp + - PCGCCTL.StopPPhyLPwrClkSelclk + - GUSBCFG.PhyLPwrClkSel + - GUSBCFG.DDRSel + - GUSBCFG.PHYSel + - GUSBCFG.FSIntf + - GUSBCFG.ULPI_UTMI_Sel + - GUSBCFG.PHYIf + - HCFG.FSLSPclkSel + - DCFG.DevSpd + * All module state machines (except the AHB Slave Unit) are + reset to the IDLE state, and all the transmit FIFOs and the + receive FIFO are flushed. + * Any transactions on the AHB Master are terminated as soon + as possible, after gracefully completing the last data phase of + an AHB transfer. Any transactions on the USB are terminated + immediately. + The application can write to this bit any time it wants to reset + the core. This is a self-clearing bit and the core clears this bit + after all the necessary logic is reset in the core, which may take + several clocks, depending on the current state of the core. + Once this bit is cleared software should wait at least 3 PHY + clocks before doing any access to the PHY domain + (synchronization delay). Software should also should check that + bit 31 of this register is 1 (AHB Master is IDLE) before starting + any operation. + Typically software reset is used during software development + and also when you dynamically change the PHY selection bits + in the USB configuration registers listed above. When you + change the PHY, the corresponding clock for the PHY is + selected and used in the PHY domain. Once a new clock is + selected, the PHY domain has to be reset for proper operation. */ +#else + uint32_t csftrst : 1; + uint32_t hsftrst : 1; + uint32_t frmcntrrst : 1; + uint32_t intknqflsh : 1; + uint32_t rxfflsh : 1; + uint32_t txfflsh : 1; + uint32_t txfnum : 5; + uint32_t reserved_11_29 : 19; + uint32_t dmareq : 1; + uint32_t ahbidle : 1; +#endif + } s; + struct cvmx_usbcx_grstctl_s cn30xx; + struct cvmx_usbcx_grstctl_s cn31xx; + struct cvmx_usbcx_grstctl_s cn50xx; + struct cvmx_usbcx_grstctl_s cn52xx; + struct cvmx_usbcx_grstctl_s cn52xxp1; + struct cvmx_usbcx_grstctl_s cn56xx; + struct cvmx_usbcx_grstctl_s cn56xxp1; +}; +typedef union cvmx_usbcx_grstctl cvmx_usbcx_grstctl_t; + +/** + * cvmx_usbc#_grxfsiz + * + * Receive FIFO Size Register (GRXFSIZ) + * + * The application can program the RAM size that must be allocated to the RxFIFO. + */ +union cvmx_usbcx_grxfsiz +{ + uint32_t u32; + struct cvmx_usbcx_grxfsiz_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_16_31 : 16; + uint32_t rxfdep : 16; /**< RxFIFO Depth (RxFDep) + This value is in terms of 32-bit words. + * Minimum value is 16 + * Maximum value is 32768 */ +#else + uint32_t rxfdep : 16; + uint32_t reserved_16_31 : 16; +#endif + } s; + struct cvmx_usbcx_grxfsiz_s cn30xx; + struct cvmx_usbcx_grxfsiz_s cn31xx; + struct cvmx_usbcx_grxfsiz_s cn50xx; + struct cvmx_usbcx_grxfsiz_s cn52xx; + struct cvmx_usbcx_grxfsiz_s cn52xxp1; + struct cvmx_usbcx_grxfsiz_s cn56xx; + struct cvmx_usbcx_grxfsiz_s cn56xxp1; +}; +typedef union cvmx_usbcx_grxfsiz cvmx_usbcx_grxfsiz_t; + +/** + * cvmx_usbc#_grxstspd + * + * Receive Status Debug Read Register, Device Mode (GRXSTSPD) + * + * A read to the Receive Status Read and Pop register returns and additionally pops the top data entry out of the RxFIFO. + * This Description is only valid when the core is in Device Mode. For Host Mode use USBC_GRXSTSPH instead. + * NOTE: GRXSTSPH and GRXSTSPD are physically the same register and share the same offset in the O2P USB core. + * The offset difference shown in this document is for software clarity and is actually ignored by the + * hardware. + */ +union cvmx_usbcx_grxstspd +{ + uint32_t u32; + struct cvmx_usbcx_grxstspd_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_25_31 : 7; + uint32_t fn : 4; /**< Frame Number (FN) + This is the least significant 4 bits of the (micro)frame number in + which the packet is received on the USB. This field is supported + only when the isochronous OUT endpoints are supported. */ + uint32_t pktsts : 4; /**< Packet Status (PktSts) + Indicates the status of the received packet + * 4'b0001: Glogal OUT NAK (triggers an interrupt) + * 4'b0010: OUT data packet received + * 4'b0100: SETUP transaction completed (triggers an interrupt) + * 4'b0110: SETUP data packet received + * Others: Reserved */ + uint32_t dpid : 2; /**< Data PID (DPID) + * 2'b00: DATA0 + * 2'b10: DATA1 + * 2'b01: DATA2 + * 2'b11: MDATA */ + uint32_t bcnt : 11; /**< Byte Count (BCnt) + Indicates the byte count of the received data packet */ + uint32_t epnum : 4; /**< Endpoint Number (EPNum) + Indicates the endpoint number to which the current received + packet belongs. */ +#else + uint32_t epnum : 4; + uint32_t bcnt : 11; + uint32_t dpid : 2; + uint32_t pktsts : 4; + uint32_t fn : 4; + uint32_t reserved_25_31 : 7; +#endif + } s; + struct cvmx_usbcx_grxstspd_s cn30xx; + struct cvmx_usbcx_grxstspd_s cn31xx; + struct cvmx_usbcx_grxstspd_s cn50xx; + struct cvmx_usbcx_grxstspd_s cn52xx; + struct cvmx_usbcx_grxstspd_s cn52xxp1; + struct cvmx_usbcx_grxstspd_s cn56xx; + struct cvmx_usbcx_grxstspd_s cn56xxp1; +}; +typedef union cvmx_usbcx_grxstspd cvmx_usbcx_grxstspd_t; + +/** + * cvmx_usbc#_grxstsph + * + * Receive Status Read and Pop Register, Host Mode (GRXSTSPH) + * + * A read to the Receive Status Read and Pop register returns and additionally pops the top data entry out of the RxFIFO. + * This Description is only valid when the core is in Host Mode. For Device Mode use USBC_GRXSTSPD instead. + * NOTE: GRXSTSPH and GRXSTSPD are physically the same register and share the same offset in the O2P USB core. + * The offset difference shown in this document is for software clarity and is actually ignored by the + * hardware. + */ +union cvmx_usbcx_grxstsph +{ + uint32_t u32; + struct cvmx_usbcx_grxstsph_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_21_31 : 11; + uint32_t pktsts : 4; /**< Packet Status (PktSts) + Indicates the status of the received packet + * 4'b0010: IN data packet received + * 4'b0011: IN transfer completed (triggers an interrupt) + * 4'b0101: Data toggle error (triggers an interrupt) + * 4'b0111: Channel halted (triggers an interrupt) + * Others: Reserved */ + uint32_t dpid : 2; /**< Data PID (DPID) + * 2'b00: DATA0 + * 2'b10: DATA1 + * 2'b01: DATA2 + * 2'b11: MDATA */ + uint32_t bcnt : 11; /**< Byte Count (BCnt) + Indicates the byte count of the received IN data packet */ + uint32_t chnum : 4; /**< Channel Number (ChNum) + Indicates the channel number to which the current received + packet belongs. */ +#else + uint32_t chnum : 4; + uint32_t bcnt : 11; + uint32_t dpid : 2; + uint32_t pktsts : 4; + uint32_t reserved_21_31 : 11; +#endif + } s; + struct cvmx_usbcx_grxstsph_s cn30xx; + struct cvmx_usbcx_grxstsph_s cn31xx; + struct cvmx_usbcx_grxstsph_s cn50xx; + struct cvmx_usbcx_grxstsph_s cn52xx; + struct cvmx_usbcx_grxstsph_s cn52xxp1; + struct cvmx_usbcx_grxstsph_s cn56xx; + struct cvmx_usbcx_grxstsph_s cn56xxp1; +}; +typedef union cvmx_usbcx_grxstsph cvmx_usbcx_grxstsph_t; + +/** + * cvmx_usbc#_grxstsrd + * + * Receive Status Debug Read Register, Device Mode (GRXSTSRD) + * + * A read to the Receive Status Debug Read register returns the contents of the top of the Receive FIFO. + * This Description is only valid when the core is in Device Mode. For Host Mode use USBC_GRXSTSRH instead. + * NOTE: GRXSTSRH and GRXSTSRD are physically the same register and share the same offset in the O2P USB core. + * The offset difference shown in this document is for software clarity and is actually ignored by the + * hardware. + */ +union cvmx_usbcx_grxstsrd +{ + uint32_t u32; + struct cvmx_usbcx_grxstsrd_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_25_31 : 7; + uint32_t fn : 4; /**< Frame Number (FN) + This is the least significant 4 bits of the (micro)frame number in + which the packet is received on the USB. This field is supported + only when the isochronous OUT endpoints are supported. */ + uint32_t pktsts : 4; /**< Packet Status (PktSts) + Indicates the status of the received packet + * 4'b0001: Glogal OUT NAK (triggers an interrupt) + * 4'b0010: OUT data packet received + * 4'b0100: SETUP transaction completed (triggers an interrupt) + * 4'b0110: SETUP data packet received + * Others: Reserved */ + uint32_t dpid : 2; /**< Data PID (DPID) + * 2'b00: DATA0 + * 2'b10: DATA1 + * 2'b01: DATA2 + * 2'b11: MDATA */ + uint32_t bcnt : 11; /**< Byte Count (BCnt) + Indicates the byte count of the received data packet */ + uint32_t epnum : 4; /**< Endpoint Number (EPNum) + Indicates the endpoint number to which the current received + packet belongs. */ +#else + uint32_t epnum : 4; + uint32_t bcnt : 11; + uint32_t dpid : 2; + uint32_t pktsts : 4; + uint32_t fn : 4; + uint32_t reserved_25_31 : 7; +#endif + } s; + struct cvmx_usbcx_grxstsrd_s cn30xx; + struct cvmx_usbcx_grxstsrd_s cn31xx; + struct cvmx_usbcx_grxstsrd_s cn50xx; + struct cvmx_usbcx_grxstsrd_s cn52xx; + struct cvmx_usbcx_grxstsrd_s cn52xxp1; + struct cvmx_usbcx_grxstsrd_s cn56xx; + struct cvmx_usbcx_grxstsrd_s cn56xxp1; +}; +typedef union cvmx_usbcx_grxstsrd cvmx_usbcx_grxstsrd_t; + +/** + * cvmx_usbc#_grxstsrh + * + * Receive Status Debug Read Register, Host Mode (GRXSTSRH) + * + * A read to the Receive Status Debug Read register returns the contents of the top of the Receive FIFO. + * This Description is only valid when the core is in Host Mode. For Device Mode use USBC_GRXSTSRD instead. + * NOTE: GRXSTSRH and GRXSTSRD are physically the same register and share the same offset in the O2P USB core. + * The offset difference shown in this document is for software clarity and is actually ignored by the + * hardware. + */ +union cvmx_usbcx_grxstsrh +{ + uint32_t u32; + struct cvmx_usbcx_grxstsrh_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_21_31 : 11; + uint32_t pktsts : 4; /**< Packet Status (PktSts) + Indicates the status of the received packet + * 4'b0010: IN data packet received + * 4'b0011: IN transfer completed (triggers an interrupt) + * 4'b0101: Data toggle error (triggers an interrupt) + * 4'b0111: Channel halted (triggers an interrupt) + * Others: Reserved */ + uint32_t dpid : 2; /**< Data PID (DPID) + * 2'b00: DATA0 + * 2'b10: DATA1 + * 2'b01: DATA2 + * 2'b11: MDATA */ + uint32_t bcnt : 11; /**< Byte Count (BCnt) + Indicates the byte count of the received IN data packet */ + uint32_t chnum : 4; /**< Channel Number (ChNum) + Indicates the channel number to which the current received + packet belongs. */ +#else + uint32_t chnum : 4; + uint32_t bcnt : 11; + uint32_t dpid : 2; + uint32_t pktsts : 4; + uint32_t reserved_21_31 : 11; +#endif + } s; + struct cvmx_usbcx_grxstsrh_s cn30xx; + struct cvmx_usbcx_grxstsrh_s cn31xx; + struct cvmx_usbcx_grxstsrh_s cn50xx; + struct cvmx_usbcx_grxstsrh_s cn52xx; + struct cvmx_usbcx_grxstsrh_s cn52xxp1; + struct cvmx_usbcx_grxstsrh_s cn56xx; + struct cvmx_usbcx_grxstsrh_s cn56xxp1; +}; +typedef union cvmx_usbcx_grxstsrh cvmx_usbcx_grxstsrh_t; + +/** + * cvmx_usbc#_gsnpsid + * + * Synopsys ID Register (GSNPSID) + * + * This is a read-only register that contains the release number of the core being used. + */ +union cvmx_usbcx_gsnpsid +{ + uint32_t u32; + struct cvmx_usbcx_gsnpsid_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t synopsysid : 32; /**< 0x4F54\<version\>A, release number of the core being used. + 0x4F54220A => pass1.x, 0x4F54240A => pass2.x */ +#else + uint32_t synopsysid : 32; +#endif + } s; + struct cvmx_usbcx_gsnpsid_s cn30xx; + struct cvmx_usbcx_gsnpsid_s cn31xx; + struct cvmx_usbcx_gsnpsid_s cn50xx; + struct cvmx_usbcx_gsnpsid_s cn52xx; + struct cvmx_usbcx_gsnpsid_s cn52xxp1; + struct cvmx_usbcx_gsnpsid_s cn56xx; + struct cvmx_usbcx_gsnpsid_s cn56xxp1; +}; +typedef union cvmx_usbcx_gsnpsid cvmx_usbcx_gsnpsid_t; + +/** + * cvmx_usbc#_gusbcfg + * + * Core USB Configuration Register (GUSBCFG) + * + * This register can be used to configure the core after power-on or a changing to Host mode or Device mode. + * It contains USB and USB-PHY related configuration parameters. The application must program this register + * before starting any transactions on either the AHB or the USB. + * Do not make changes to this register after the initial programming. + */ +union cvmx_usbcx_gusbcfg +{ + uint32_t u32; + struct cvmx_usbcx_gusbcfg_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_17_31 : 15; + uint32_t otgi2csel : 1; /**< UTMIFS or I2C Interface Select (OtgI2CSel) + This bit is always 0x0. */ + uint32_t phylpwrclksel : 1; /**< PHY Low-Power Clock Select (PhyLPwrClkSel) + Software should set this bit to 0x0. + Selects either 480-MHz or 48-MHz (low-power) PHY mode. In + FS and LS modes, the PHY can usually operate on a 48-MHz + clock to save power. + * 1'b0: 480-MHz Internal PLL clock + * 1'b1: 48-MHz External Clock + In 480 MHz mode, the UTMI interface operates at either 60 or + 30-MHz, depending upon whether 8- or 16-bit data width is + selected. In 48-MHz mode, the UTMI interface operates at 48 + MHz in FS mode and at either 48 or 6 MHz in LS mode + (depending on the PHY vendor). + This bit drives the utmi_fsls_low_power core output signal, and + is valid only for UTMI+ PHYs. */ + uint32_t reserved_14_14 : 1; + uint32_t usbtrdtim : 4; /**< USB Turnaround Time (USBTrdTim) + Sets the turnaround time in PHY clocks. + Specifies the response time for a MAC request to the Packet + FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM). + This must be programmed to 0x5. */ + uint32_t hnpcap : 1; /**< HNP-Capable (HNPCap) + This bit is always 0x0. */ + uint32_t srpcap : 1; /**< SRP-Capable (SRPCap) + This bit is always 0x0. */ + uint32_t ddrsel : 1; /**< ULPI DDR Select (DDRSel) + Software should set this bit to 0x0. */ + uint32_t physel : 1; /**< USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial + Software should set this bit to 0x0. */ + uint32_t fsintf : 1; /**< Full-Speed Serial Interface Select (FSIntf) + Software should set this bit to 0x0. */ + uint32_t ulpi_utmi_sel : 1; /**< ULPI or UTMI+ Select (ULPI_UTMI_Sel) + This bit is always 0x0. */ + uint32_t phyif : 1; /**< PHY Interface (PHYIf) + This bit is always 0x1. */ + uint32_t toutcal : 3; /**< HS/FS Timeout Calibration (TOutCal) + The number of PHY clocks that the application programs in this + field is added to the high-speed/full-speed interpacket timeout + duration in the core to account for any additional delays + introduced by the PHY. This may be required, since the delay + introduced by the PHY in generating the linestate condition may + vary from one PHY to another. + The USB standard timeout value for high-speed operation is + 736 to 816 (inclusive) bit times. The USB standard timeout + value for full-speed operation is 16 to 18 (inclusive) bit times. + The application must program this field based on the speed of + enumeration. The number of bit times added per PHY clock are: + High-speed operation: + * One 30-MHz PHY clock = 16 bit times + * One 60-MHz PHY clock = 8 bit times + Full-speed operation: + * One 30-MHz PHY clock = 0.4 bit times + * One 60-MHz PHY clock = 0.2 bit times + * One 48-MHz PHY clock = 0.25 bit times */ +#else + uint32_t toutcal : 3; + uint32_t phyif : 1; + uint32_t ulpi_utmi_sel : 1; + uint32_t fsintf : 1; + uint32_t physel : 1; + uint32_t ddrsel : 1; + uint32_t srpcap : 1; + uint32_t hnpcap : 1; + uint32_t usbtrdtim : 4; + uint32_t reserved_14_14 : 1; + uint32_t phylpwrclksel : 1; + uint32_t otgi2csel : 1; + uint32_t reserved_17_31 : 15; +#endif + } s; + struct cvmx_usbcx_gusbcfg_s cn30xx; + struct cvmx_usbcx_gusbcfg_s cn31xx; + struct cvmx_usbcx_gusbcfg_s cn50xx; + struct cvmx_usbcx_gusbcfg_s cn52xx; + struct cvmx_usbcx_gusbcfg_s cn52xxp1; + struct cvmx_usbcx_gusbcfg_s cn56xx; + struct cvmx_usbcx_gusbcfg_s cn56xxp1; +}; +typedef union cvmx_usbcx_gusbcfg cvmx_usbcx_gusbcfg_t; + +/** + * cvmx_usbc#_haint + * + * Host All Channels Interrupt Register (HAINT) + * + * When a significant event occurs on a channel, the Host All Channels Interrupt register + * interrupts the application using the Host Channels Interrupt bit of the Core Interrupt + * register (GINTSTS.HChInt). This is shown in Interrupt . There is one interrupt bit per + * channel, up to a maximum of 16 bits. Bits in this register are set and cleared when the + * application sets and clears bits in the corresponding Host Channel-n Interrupt register. + */ +union cvmx_usbcx_haint +{ + uint32_t u32; + struct cvmx_usbcx_haint_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_16_31 : 16; + uint32_t haint : 16; /**< Channel Interrupts (HAINT) + One bit per channel: Bit 0 for Channel 0, bit 15 for Channel 15 */ +#else + uint32_t haint : 16; + uint32_t reserved_16_31 : 16; +#endif + } s; + struct cvmx_usbcx_haint_s cn30xx; + struct cvmx_usbcx_haint_s cn31xx; + struct cvmx_usbcx_haint_s cn50xx; + struct cvmx_usbcx_haint_s cn52xx; + struct cvmx_usbcx_haint_s cn52xxp1; + struct cvmx_usbcx_haint_s cn56xx; + struct cvmx_usbcx_haint_s cn56xxp1; +}; +typedef union cvmx_usbcx_haint cvmx_usbcx_haint_t; + +/** + * cvmx_usbc#_haintmsk + * + * Host All Channels Interrupt Mask Register (HAINTMSK) + * + * The Host All Channel Interrupt Mask register works with the Host All Channel Interrupt + * register to interrupt the application when an event occurs on a channel. There is one + * interrupt mask bit per channel, up to a maximum of 16 bits. + * Mask interrupt: 1'b0 Unmask interrupt: 1'b1 + */ +union cvmx_usbcx_haintmsk +{ + uint32_t u32; + struct cvmx_usbcx_haintmsk_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_16_31 : 16; + uint32_t haintmsk : 16; /**< Channel Interrupt Mask (HAINTMsk) + One bit per channel: Bit 0 for channel 0, bit 15 for channel 15 */ +#else + uint32_t haintmsk : 16; + uint32_t reserved_16_31 : 16; +#endif + } s; + struct cvmx_usbcx_haintmsk_s cn30xx; + struct cvmx_usbcx_haintmsk_s cn31xx; + struct cvmx_usbcx_haintmsk_s cn50xx; + struct cvmx_usbcx_haintmsk_s cn52xx; + struct cvmx_usbcx_haintmsk_s cn52xxp1; + struct cvmx_usbcx_haintmsk_s cn56xx; + struct cvmx_usbcx_haintmsk_s cn56xxp1; +}; +typedef union cvmx_usbcx_haintmsk cvmx_usbcx_haintmsk_t; + +/** + * cvmx_usbc#_hcchar# + * + * Host Channel-n Characteristics Register (HCCHAR) + * + */ +union cvmx_usbcx_hccharx +{ + uint32_t u32; + struct cvmx_usbcx_hccharx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t chena : 1; /**< Channel Enable (ChEna) + This field is set by the application and cleared by the OTG host. + * 1'b0: Channel disabled + * 1'b1: Channel enabled */ + uint32_t chdis : 1; /**< Channel Disable (ChDis) + The application sets this bit to stop transmitting/receiving data + on a channel, even before the transfer for that channel is + complete. The application must wait for the Channel Disabled + interrupt before treating the channel as disabled. */ + uint32_t oddfrm : 1; /**< Odd Frame (OddFrm) + This field is set (reset) by the application to indicate that the + OTG host must perform a transfer in an odd (micro)frame. This + field is applicable for only periodic (isochronous and interrupt) + transactions. + * 1'b0: Even (micro)frame + * 1'b1: Odd (micro)frame */ + uint32_t devaddr : 7; /**< Device Address (DevAddr) + This field selects the specific device serving as the data source + or sink. */ + uint32_t ec : 2; /**< Multi Count (MC) / Error Count (EC) + When the Split Enable bit of the Host Channel-n Split Control + register (HCSPLTn.SpltEna) is reset (1'b0), this field indicates + to the host the number of transactions that should be executed + per microframe for this endpoint. + * 2'b00: Reserved. This field yields undefined results. + * 2'b01: 1 transaction + * 2'b10: 2 transactions to be issued for this endpoint per + microframe + * 2'b11: 3 transactions to be issued for this endpoint per + microframe + When HCSPLTn.SpltEna is set (1'b1), this field indicates the + number of immediate retries to be performed for a periodic split + transactions on transaction errors. This field must be set to at + least 2'b01. */ + uint32_t eptype : 2; /**< Endpoint Type (EPType) + Indicates the transfer type selected. + * 2'b00: Control + * 2'b01: Isochronous + * 2'b10: Bulk + * 2'b11: Interrupt */ + uint32_t lspddev : 1; /**< Low-Speed Device (LSpdDev) + This field is set by the application to indicate that this channel is + communicating to a low-speed device. */ + uint32_t reserved_16_16 : 1; + uint32_t epdir : 1; /**< Endpoint Direction (EPDir) + Indicates whether the transaction is IN or OUT. + * 1'b0: OUT + * 1'b1: IN */ + uint32_t epnum : 4; /**< Endpoint Number (EPNum) + Indicates the endpoint number on the device serving as the + data source or sink. */ + uint32_t mps : 11; /**< Maximum Packet Size (MPS) + Indicates the maximum packet size of the associated endpoint. */ +#else + uint32_t mps : 11; + uint32_t epnum : 4; + uint32_t epdir : 1; + uint32_t reserved_16_16 : 1; + uint32_t lspddev : 1; + uint32_t eptype : 2; + uint32_t ec : 2; + uint32_t devaddr : 7; + uint32_t oddfrm : 1; + uint32_t chdis : 1; + uint32_t chena : 1; +#endif + } s; + struct cvmx_usbcx_hccharx_s cn30xx; + struct cvmx_usbcx_hccharx_s cn31xx; + struct cvmx_usbcx_hccharx_s cn50xx; + struct cvmx_usbcx_hccharx_s cn52xx; + struct cvmx_usbcx_hccharx_s cn52xxp1; + struct cvmx_usbcx_hccharx_s cn56xx; + struct cvmx_usbcx_hccharx_s cn56xxp1; +}; +typedef union cvmx_usbcx_hccharx cvmx_usbcx_hccharx_t; + +/** + * cvmx_usbc#_hcfg + * + * Host Configuration Register (HCFG) + * + * This register configures the core after power-on. Do not make changes to this register after initializing the host. + */ +union cvmx_usbcx_hcfg +{ + uint32_t u32; + struct cvmx_usbcx_hcfg_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_3_31 : 29; + uint32_t fslssupp : 1; /**< FS- and LS-Only Support (FSLSSupp) + The application uses this bit to control the core's enumeration + speed. Using this bit, the application can make the core + enumerate as a FS host, even if the connected device supports + HS traffic. Do not make changes to this field after initial + programming. + * 1'b0: HS/FS/LS, based on the maximum speed supported by + the connected device + * 1'b1: FS/LS-only, even if the connected device can support HS */ + uint32_t fslspclksel : 2; /**< FS/LS PHY Clock Select (FSLSPclkSel) + When the core is in FS Host mode + * 2'b00: PHY clock is running at 30/60 MHz + * 2'b01: PHY clock is running at 48 MHz + * Others: Reserved + When the core is in LS Host mode + * 2'b00: PHY clock is running at 30/60 MHz. When the + UTMI+/ULPI PHY Low Power mode is not selected, use + 30/60 MHz. + * 2'b01: PHY clock is running at 48 MHz. When the UTMI+ + PHY Low Power mode is selected, use 48MHz if the PHY + supplies a 48 MHz clock during LS mode. + * 2'b10: PHY clock is running at 6 MHz. In USB 1.1 FS mode, + use 6 MHz when the UTMI+ PHY Low Power mode is + selected and the PHY supplies a 6 MHz clock during LS + mode. If you select a 6 MHz clock during LS mode, you must + do a soft reset. + * 2'b11: Reserved */ +#else + uint32_t fslspclksel : 2; + uint32_t fslssupp : 1; + uint32_t reserved_3_31 : 29; +#endif + } s; + struct cvmx_usbcx_hcfg_s cn30xx; + struct cvmx_usbcx_hcfg_s cn31xx; + struct cvmx_usbcx_hcfg_s cn50xx; + struct cvmx_usbcx_hcfg_s cn52xx; + struct cvmx_usbcx_hcfg_s cn52xxp1; + struct cvmx_usbcx_hcfg_s cn56xx; + struct cvmx_usbcx_hcfg_s cn56xxp1; +}; +typedef union cvmx_usbcx_hcfg cvmx_usbcx_hcfg_t; + +/** + * cvmx_usbc#_hcint# + * + * Host Channel-n Interrupt Register (HCINT) + * + * This register indicates the status of a channel with respect to USB- and AHB-related events. + * The application must read this register when the Host Channels Interrupt bit of the Core Interrupt + * register (GINTSTS.HChInt) is set. Before the application can read this register, it must first read + * the Host All Channels Interrupt (HAINT) register to get the exact channel number for the Host Channel-n + * Interrupt register. The application must clear the appropriate bit in this register to clear the + * corresponding bits in the HAINT and GINTSTS registers. + */ +union cvmx_usbcx_hcintx +{ + uint32_t u32; + struct cvmx_usbcx_hcintx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_11_31 : 21; + uint32_t datatglerr : 1; /**< Data Toggle Error (DataTglErr) */ + uint32_t frmovrun : 1; /**< Frame Overrun (FrmOvrun) */ + uint32_t bblerr : 1; /**< Babble Error (BblErr) */ + uint32_t xacterr : 1; /**< Transaction Error (XactErr) */ + uint32_t nyet : 1; /**< NYET Response Received Interrupt (NYET) */ + uint32_t ack : 1; /**< ACK Response Received Interrupt (ACK) */ + uint32_t nak : 1; /**< NAK Response Received Interrupt (NAK) */ + uint32_t stall : 1; /**< STALL Response Received Interrupt (STALL) */ + uint32_t ahberr : 1; /**< This bit is always 0x0. */ + uint32_t chhltd : 1; /**< Channel Halted (ChHltd) + Indicates the transfer completed abnormally either because of + any USB transaction error or in response to disable request by + the application. */ + uint32_t xfercompl : 1; /**< Transfer Completed (XferCompl) + Transfer completed normally without any errors. */ +#else + uint32_t xfercompl : 1; + uint32_t chhltd : 1; + uint32_t ahberr : 1; + uint32_t stall : 1; + uint32_t nak : 1; + uint32_t ack : 1; + uint32_t nyet : 1; + uint32_t xacterr : 1; + uint32_t bblerr : 1; + uint32_t frmovrun : 1; + uint32_t datatglerr : 1; + uint32_t reserved_11_31 : 21; +#endif + } s; + struct cvmx_usbcx_hcintx_s cn30xx; + struct cvmx_usbcx_hcintx_s cn31xx; + struct cvmx_usbcx_hcintx_s cn50xx; + struct cvmx_usbcx_hcintx_s cn52xx; + struct cvmx_usbcx_hcintx_s cn52xxp1; + struct cvmx_usbcx_hcintx_s cn56xx; + struct cvmx_usbcx_hcintx_s cn56xxp1; +}; +typedef union cvmx_usbcx_hcintx cvmx_usbcx_hcintx_t; + +/** + * cvmx_usbc#_hcintmsk# + * + * Host Channel-n Interrupt Mask Register (HCINTMSKn) + * + * This register reflects the mask for each channel status described in the previous section. + * Mask interrupt: 1'b0 Unmask interrupt: 1'b1 + */ +union cvmx_usbcx_hcintmskx +{ + uint32_t u32; + struct cvmx_usbcx_hcintmskx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_11_31 : 21; + uint32_t datatglerrmsk : 1; /**< Data Toggle Error Mask (DataTglErrMsk) */ + uint32_t frmovrunmsk : 1; /**< Frame Overrun Mask (FrmOvrunMsk) */ + uint32_t bblerrmsk : 1; /**< Babble Error Mask (BblErrMsk) */ + uint32_t xacterrmsk : 1; /**< Transaction Error Mask (XactErrMsk) */ + uint32_t nyetmsk : 1; /**< NYET Response Received Interrupt Mask (NyetMsk) */ + uint32_t ackmsk : 1; /**< ACK Response Received Interrupt Mask (AckMsk) */ + uint32_t nakmsk : 1; /**< NAK Response Received Interrupt Mask (NakMsk) */ + uint32_t stallmsk : 1; /**< STALL Response Received Interrupt Mask (StallMsk) */ + uint32_t ahberrmsk : 1; /**< AHB Error Mask (AHBErrMsk) */ + uint32_t chhltdmsk : 1; /**< Channel Halted Mask (ChHltdMsk) */ + uint32_t xfercomplmsk : 1; /**< Transfer Completed Mask (XferComplMsk) */ +#else + uint32_t xfercomplmsk : 1; + uint32_t chhltdmsk : 1; + uint32_t ahberrmsk : 1; + uint32_t stallmsk : 1; + uint32_t nakmsk : 1; + uint32_t ackmsk : 1; + uint32_t nyetmsk : 1; + uint32_t xacterrmsk : 1; + uint32_t bblerrmsk : 1; + uint32_t frmovrunmsk : 1; + uint32_t datatglerrmsk : 1; + uint32_t reserved_11_31 : 21; +#endif + } s; + struct cvmx_usbcx_hcintmskx_s cn30xx; + struct cvmx_usbcx_hcintmskx_s cn31xx; + struct cvmx_usbcx_hcintmskx_s cn50xx; + struct cvmx_usbcx_hcintmskx_s cn52xx; + struct cvmx_usbcx_hcintmskx_s cn52xxp1; + struct cvmx_usbcx_hcintmskx_s cn56xx; + struct cvmx_usbcx_hcintmskx_s cn56xxp1; +}; +typedef union cvmx_usbcx_hcintmskx cvmx_usbcx_hcintmskx_t; + +/** + * cvmx_usbc#_hcsplt# + * + * Host Channel-n Split Control Register (HCSPLT) + * + */ +union cvmx_usbcx_hcspltx +{ + uint32_t u32; + struct cvmx_usbcx_hcspltx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t spltena : 1; /**< Split Enable (SpltEna) + The application sets this field to indicate that this channel is + enabled to perform split transactions. */ + uint32_t reserved_17_30 : 14; + uint32_t compsplt : 1; /**< Do Complete Split (CompSplt) + The application sets this field to request the OTG host to + perform a complete split transaction. */ + uint32_t xactpos : 2; /**< Transaction Position (XactPos) + This field is used to determine whether to send all, first, middle, + or last payloads with each OUT transaction. + * 2'b11: All. This is the entire data payload is of this transaction + (which is less than or equal to 188 bytes). + * 2'b10: Begin. This is the first data payload of this transaction + (which is larger than 188 bytes). + * 2'b00: Mid. This is the middle payload of this transaction + (which is larger than 188 bytes). + * 2'b01: End. This is the last payload of this transaction (which + is larger than 188 bytes). */ + uint32_t hubaddr : 7; /**< Hub Address (HubAddr) + This field holds the device address of the transaction + translator's hub. */ + uint32_t prtaddr : 7; /**< Port Address (PrtAddr) + This field is the port number of the recipient transaction + translator. */ +#else + uint32_t prtaddr : 7; + uint32_t hubaddr : 7; + uint32_t xactpos : 2; + uint32_t compsplt : 1; + uint32_t reserved_17_30 : 14; + uint32_t spltena : 1; +#endif + } s; + struct cvmx_usbcx_hcspltx_s cn30xx; + struct cvmx_usbcx_hcspltx_s cn31xx; + struct cvmx_usbcx_hcspltx_s cn50xx; + struct cvmx_usbcx_hcspltx_s cn52xx; + struct cvmx_usbcx_hcspltx_s cn52xxp1; + struct cvmx_usbcx_hcspltx_s cn56xx; + struct cvmx_usbcx_hcspltx_s cn56xxp1; +}; +typedef union cvmx_usbcx_hcspltx cvmx_usbcx_hcspltx_t; + +/** + * cvmx_usbc#_hctsiz# + * + * Host Channel-n Transfer Size Register (HCTSIZ) + * + */ +union cvmx_usbcx_hctsizx +{ + uint32_t u32; + struct cvmx_usbcx_hctsizx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t dopng : 1; /**< Do Ping (DoPng) + Setting this field to 1 directs the host to do PING protocol. */ + uint32_t pid : 2; /**< PID (Pid) + The application programs this field with the type of PID to use + for the initial transaction. The host will maintain this field for the + rest of the transfer. + * 2'b00: DATA0 + * 2'b01: DATA2 + * 2'b10: DATA1 + * 2'b11: MDATA (non-control)/SETUP (control) */ + uint32_t pktcnt : 10; /**< Packet Count (PktCnt) + This field is programmed by the application with the expected + number of packets to be transmitted (OUT) or received (IN). + The host decrements this count on every successful + transmission or reception of an OUT/IN packet. Once this count + reaches zero, the application is interrupted to indicate normal + completion. */ + uint32_t xfersize : 19; /**< Transfer Size (XferSize) + For an OUT, this field is the number of data bytes the host will + send during the transfer. + For an IN, this field is the buffer size that the application has + reserved for the transfer. The application is expected to + program this field as an integer multiple of the maximum packet + size for IN transactions (periodic and non-periodic). */ +#else + uint32_t xfersize : 19; + uint32_t pktcnt : 10; + uint32_t pid : 2; + uint32_t dopng : 1; +#endif + } s; + struct cvmx_usbcx_hctsizx_s cn30xx; + struct cvmx_usbcx_hctsizx_s cn31xx; + struct cvmx_usbcx_hctsizx_s cn50xx; + struct cvmx_usbcx_hctsizx_s cn52xx; + struct cvmx_usbcx_hctsizx_s cn52xxp1; + struct cvmx_usbcx_hctsizx_s cn56xx; + struct cvmx_usbcx_hctsizx_s cn56xxp1; +}; +typedef union cvmx_usbcx_hctsizx cvmx_usbcx_hctsizx_t; + +/** + * cvmx_usbc#_hfir + * + * Host Frame Interval Register (HFIR) + * + * This register stores the frame interval information for the current speed to which the O2P USB core has enumerated. + */ +union cvmx_usbcx_hfir +{ + uint32_t u32; + struct cvmx_usbcx_hfir_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_16_31 : 16; + uint32_t frint : 16; /**< Frame Interval (FrInt) + The value that the application programs to this field specifies + the interval between two consecutive SOFs (FS) or micro- + SOFs (HS) or Keep-Alive tokens (HS). This field contains the + number of PHY clocks that constitute the required frame + interval. The default value set in this field for a FS operation + when the PHY clock frequency is 60 MHz. The application can + write a value to this register only after the Port Enable bit of + the Host Port Control and Status register (HPRT.PrtEnaPort) + has been set. If no value is programmed, the core calculates + the value based on the PHY clock specified in the FS/LS PHY + Clock Select field of the Host Configuration register + (HCFG.FSLSPclkSel). Do not change the value of this field + after the initial configuration. + * 125 us (PHY clock frequency for HS) + * 1 ms (PHY clock frequency for FS/LS) */ +#else + uint32_t frint : 16; + uint32_t reserved_16_31 : 16; +#endif + } s; + struct cvmx_usbcx_hfir_s cn30xx; + struct cvmx_usbcx_hfir_s cn31xx; + struct cvmx_usbcx_hfir_s cn50xx; + struct cvmx_usbcx_hfir_s cn52xx; + struct cvmx_usbcx_hfir_s cn52xxp1; + struct cvmx_usbcx_hfir_s cn56xx; + struct cvmx_usbcx_hfir_s cn56xxp1; +}; +typedef union cvmx_usbcx_hfir cvmx_usbcx_hfir_t; + +/** + * cvmx_usbc#_hfnum + * + * Host Frame Number/Frame Time Remaining Register (HFNUM) + * + * This register indicates the current frame number. + * It also indicates the time remaining (in terms of the number of PHY clocks) + * in the current (micro)frame. + */ +union cvmx_usbcx_hfnum +{ + uint32_t u32; + struct cvmx_usbcx_hfnum_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t frrem : 16; /**< Frame Time Remaining (FrRem) + Indicates the amount of time remaining in the current + microframe (HS) or frame (FS/LS), in terms of PHY clocks. + This field decrements on each PHY clock. When it reaches + zero, this field is reloaded with the value in the Frame Interval + register and a new SOF is transmitted on the USB. */ + uint32_t frnum : 16; /**< Frame Number (FrNum) + This field increments when a new SOF is transmitted on the + USB, and is reset to 0 when it reaches 16'h3FFF. */ +#else + uint32_t frnum : 16; + uint32_t frrem : 16; +#endif + } s; + struct cvmx_usbcx_hfnum_s cn30xx; + struct cvmx_usbcx_hfnum_s cn31xx; + struct cvmx_usbcx_hfnum_s cn50xx; + struct cvmx_usbcx_hfnum_s cn52xx; + struct cvmx_usbcx_hfnum_s cn52xxp1; + struct cvmx_usbcx_hfnum_s cn56xx; + struct cvmx_usbcx_hfnum_s cn56xxp1; +}; +typedef union cvmx_usbcx_hfnum cvmx_usbcx_hfnum_t; + +/** + * cvmx_usbc#_hprt + * + * Host Port Control and Status Register (HPRT) + * + * This register is available in both Host and Device modes. + * Currently, the OTG Host supports only one port. + * A single register holds USB port-related information such as USB reset, enable, suspend, resume, + * connect status, and test mode for each port. The R_SS_WC bits in this register can trigger an + * interrupt to the application through the Host Port Interrupt bit of the Core Interrupt + * register (GINTSTS.PrtInt). On a Port Interrupt, the application must read this register and clear + * the bit that caused the interrupt. For the R_SS_WC bits, the application must write a 1 to the bit + * to clear the interrupt. + */ +union cvmx_usbcx_hprt +{ + uint32_t u32; + struct cvmx_usbcx_hprt_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_19_31 : 13; + uint32_t prtspd : 2; /**< Port Speed (PrtSpd) + Indicates the speed of the device attached to this port. + * 2'b00: High speed + * 2'b01: Full speed + * 2'b10: Low speed + * 2'b11: Reserved */ + uint32_t prttstctl : 4; /**< Port Test Control (PrtTstCtl) + The application writes a nonzero value to this field to put + the port into a Test mode, and the corresponding pattern is + signaled on the port. + * 4'b0000: Test mode disabled + * 4'b0001: Test_J mode + * 4'b0010: Test_K mode + * 4'b0011: Test_SE0_NAK mode + * 4'b0100: Test_Packet mode + * 4'b0101: Test_Force_Enable + * Others: Reserved + PrtSpd must be zero (i.e. the interface must be in high-speed + mode) to use the PrtTstCtl test modes. */ + uint32_t prtpwr : 1; /**< Port Power (PrtPwr) + The application uses this field to control power to this port, + and the core clears this bit on an overcurrent condition. + * 1'b0: Power off + * 1'b1: Power on */ + uint32_t prtlnsts : 2; /**< Port Line Status (PrtLnSts) + Indicates the current logic level USB data lines + * Bit [10]: Logic level of D- + * Bit [11]: Logic level of D+ */ + uint32_t reserved_9_9 : 1; + uint32_t prtrst : 1; /**< Port Reset (PrtRst) + When the application sets this bit, a reset sequence is + started on this port. The application must time the reset + period and clear this bit after the reset sequence is + complete. + * 1'b0: Port not in reset + * 1'b1: Port in reset + The application must leave this bit set for at least a + minimum duration mentioned below to start a reset on the + port. The application can leave it set for another 10 ms in + addition to the required minimum duration, before clearing + the bit, even though there is no maximum limit set by the + USB standard. + * High speed: 50 ms + * Full speed/Low speed: 10 ms */ + uint32_t prtsusp : 1; /**< Port Suspend (PrtSusp) + The application sets this bit to put this port in Suspend + mode. The core only stops sending SOFs when this is set. + To stop the PHY clock, the application must set the Port + Clock Stop bit, which will assert the suspend input pin of + the PHY. + The read value of this bit reflects the current suspend + status of the port. This bit is cleared by the core after a + remote wakeup signal is detected or the application sets + the Port Reset bit or Port Resume bit in this register or the + Resume/Remote Wakeup Detected Interrupt bit or + Disconnect Detected Interrupt bit in the Core Interrupt + register (GINTSTS.WkUpInt or GINTSTS.DisconnInt, + respectively). + * 1'b0: Port not in Suspend mode + * 1'b1: Port in Suspend mode */ + uint32_t prtres : 1; /**< Port Resume (PrtRes) + The application sets this bit to drive resume signaling on + the port. The core continues to drive the resume signal + until the application clears this bit. + If the core detects a USB remote wakeup sequence, as + indicated by the Port Resume/Remote Wakeup Detected + Interrupt bit of the Core Interrupt register + (GINTSTS.WkUpInt), the core starts driving resume + signaling without application intervention and clears this bit + when it detects a disconnect condition. The read value of + this bit indicates whether the core is currently driving + resume signaling. + * 1'b0: No resume driven + * 1'b1: Resume driven */ + uint32_t prtovrcurrchng : 1; /**< Port Overcurrent Change (PrtOvrCurrChng) + The core sets this bit when the status of the Port + Overcurrent Active bit (bit 4) in this register changes. */ + uint32_t prtovrcurract : 1; /**< Port Overcurrent Active (PrtOvrCurrAct) + Indicates the overcurrent condition of the port. + * 1'b0: No overcurrent condition + * 1'b1: Overcurrent condition */ + uint32_t prtenchng : 1; /**< Port Enable/Disable Change (PrtEnChng) + The core sets this bit when the status of the Port Enable bit + [2] of this register changes. */ + uint32_t prtena : 1; /**< Port Enable (PrtEna) + A port is enabled only by the core after a reset sequence, + and is disabled by an overcurrent condition, a disconnect + condition, or by the application clearing this bit. The + application cannot set this bit by a register write. It can only + clear it to disable the port. This bit does not trigger any + interrupt to the application. + * 1'b0: Port disabled + * 1'b1: Port enabled */ + uint32_t prtconndet : 1; /**< Port Connect Detected (PrtConnDet) + The core sets this bit when a device connection is detected + to trigger an interrupt to the application using the Host Port + Interrupt bit of the Core Interrupt register (GINTSTS.PrtInt). + The application must write a 1 to this bit to clear the + interrupt. */ + uint32_t prtconnsts : 1; /**< Port Connect Status (PrtConnSts) + * 0: No device is attached to the port. + * 1: A device is attached to the port. */ +#else + uint32_t prtconnsts : 1; + uint32_t prtconndet : 1; + uint32_t prtena : 1; + uint32_t prtenchng : 1; + uint32_t prtovrcurract : 1; + uint32_t prtovrcurrchng : 1; + uint32_t prtres : 1; + uint32_t prtsusp : 1; + uint32_t prtrst : 1; + uint32_t reserved_9_9 : 1; + uint32_t prtlnsts : 2; + uint32_t prtpwr : 1; + uint32_t prttstctl : 4; + uint32_t prtspd : 2; + uint32_t reserved_19_31 : 13; +#endif + } s; + struct cvmx_usbcx_hprt_s cn30xx; + struct cvmx_usbcx_hprt_s cn31xx; + struct cvmx_usbcx_hprt_s cn50xx; + struct cvmx_usbcx_hprt_s cn52xx; + struct cvmx_usbcx_hprt_s cn52xxp1; + struct cvmx_usbcx_hprt_s cn56xx; + struct cvmx_usbcx_hprt_s cn56xxp1; +}; +typedef union cvmx_usbcx_hprt cvmx_usbcx_hprt_t; + +/** + * cvmx_usbc#_hptxfsiz + * + * Host Periodic Transmit FIFO Size Register (HPTXFSIZ) + * + * This register holds the size and the memory start address of the Periodic TxFIFO, as shown in Figures 310 and 311. + */ +union cvmx_usbcx_hptxfsiz +{ + uint32_t u32; + struct cvmx_usbcx_hptxfsiz_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t ptxfsize : 16; /**< Host Periodic TxFIFO Depth (PTxFSize) + This value is in terms of 32-bit words. + * Minimum value is 16 + * Maximum value is 32768 */ + uint32_t ptxfstaddr : 16; /**< Host Periodic TxFIFO Start Address (PTxFStAddr) */ +#else + uint32_t ptxfstaddr : 16; + uint32_t ptxfsize : 16; +#endif + } s; + struct cvmx_usbcx_hptxfsiz_s cn30xx; + struct cvmx_usbcx_hptxfsiz_s cn31xx; + struct cvmx_usbcx_hptxfsiz_s cn50xx; + struct cvmx_usbcx_hptxfsiz_s cn52xx; + struct cvmx_usbcx_hptxfsiz_s cn52xxp1; + struct cvmx_usbcx_hptxfsiz_s cn56xx; + struct cvmx_usbcx_hptxfsiz_s cn56xxp1; +}; +typedef union cvmx_usbcx_hptxfsiz cvmx_usbcx_hptxfsiz_t; + +/** + * cvmx_usbc#_hptxsts + * + * Host Periodic Transmit FIFO/Queue Status Register (HPTXSTS) + * + * This read-only register contains the free space information for the Periodic TxFIFO and + * the Periodic Transmit Request Queue + */ +union cvmx_usbcx_hptxsts +{ + uint32_t u32; + struct cvmx_usbcx_hptxsts_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t ptxqtop : 8; /**< Top of the Periodic Transmit Request Queue (PTxQTop) + This indicates the entry in the Periodic Tx Request Queue that + is currently being processes by the MAC. + This register is used for debugging. + * Bit [31]: Odd/Even (micro)frame + - 1'b0: send in even (micro)frame + - 1'b1: send in odd (micro)frame + * Bits [30:27]: Channel/endpoint number + * Bits [26:25]: Type + - 2'b00: IN/OUT + - 2'b01: Zero-length packet + - 2'b10: CSPLIT + - 2'b11: Disable channel command + * Bit [24]: Terminate (last entry for the selected + channel/endpoint) */ + uint32_t ptxqspcavail : 8; /**< Periodic Transmit Request Queue Space Available + (PTxQSpcAvail) + Indicates the number of free locations available to be written in + the Periodic Transmit Request Queue. This queue holds both + IN and OUT requests. + * 8'h0: Periodic Transmit Request Queue is full + * 8'h1: 1 location available + * 8'h2: 2 locations available + * n: n locations available (0..8) + * Others: Reserved */ + uint32_t ptxfspcavail : 16; /**< Periodic Transmit Data FIFO Space Available (PTxFSpcAvail) + Indicates the number of free locations available to be written to + in the Periodic TxFIFO. + Values are in terms of 32-bit words + * 16'h0: Periodic TxFIFO is full + * 16'h1: 1 word available + * 16'h2: 2 words available + * 16'hn: n words available (where 0..32768) + * 16'h8000: 32768 words available + * Others: Reserved */ +#else + uint32_t ptxfspcavail : 16; + uint32_t ptxqspcavail : 8; + uint32_t ptxqtop : 8; +#endif + } s; + struct cvmx_usbcx_hptxsts_s cn30xx; + struct cvmx_usbcx_hptxsts_s cn31xx; + struct cvmx_usbcx_hptxsts_s cn50xx; + struct cvmx_usbcx_hptxsts_s cn52xx; + struct cvmx_usbcx_hptxsts_s cn52xxp1; + struct cvmx_usbcx_hptxsts_s cn56xx; + struct cvmx_usbcx_hptxsts_s cn56xxp1; +}; +typedef union cvmx_usbcx_hptxsts cvmx_usbcx_hptxsts_t; + +/** + * cvmx_usbc#_nptxdfifo# + * + * NPTX Data Fifo (NPTXDFIFO) + * + * A slave mode application uses this register to access the Tx FIFO for channel n. + */ +union cvmx_usbcx_nptxdfifox +{ + uint32_t u32; + struct cvmx_usbcx_nptxdfifox_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t data : 32; /**< Reserved */ +#else + uint32_t data : 32; +#endif + } s; + struct cvmx_usbcx_nptxdfifox_s cn30xx; + struct cvmx_usbcx_nptxdfifox_s cn31xx; + struct cvmx_usbcx_nptxdfifox_s cn50xx; + struct cvmx_usbcx_nptxdfifox_s cn52xx; + struct cvmx_usbcx_nptxdfifox_s cn52xxp1; + struct cvmx_usbcx_nptxdfifox_s cn56xx; + struct cvmx_usbcx_nptxdfifox_s cn56xxp1; +}; +typedef union cvmx_usbcx_nptxdfifox cvmx_usbcx_nptxdfifox_t; + +/** + * cvmx_usbc#_pcgcctl + * + * Power and Clock Gating Control Register (PCGCCTL) + * + * The application can use this register to control the core's power-down and clock gating features. + */ +union cvmx_usbcx_pcgcctl +{ + uint32_t u32; + struct cvmx_usbcx_pcgcctl_s + { +#if __BYTE_ORDER == __BIG_ENDIAN + uint32_t reserved_5_31 : 27; + uint32_t physuspended : 1; /**< PHY Suspended. (PhySuspended) + Indicates that the PHY has been suspended. After the + application sets the Stop Pclk bit (bit 0), this bit is updated once + the PHY is suspended. + Since the UTMI+ PHY suspend is controlled through a port, the + UTMI+ PHY is suspended immediately after Stop Pclk is set. + However, the ULPI PHY takes a few clocks to suspend, + because the suspend information is conveyed through the ULPI + protocol to the ULPI PHY. */ + uint32_t rstpdwnmodule : 1; /**< Reset Power-Down Modules (RstPdwnModule) + This bit is valid only in Partial Power-Down mode. The + application sets this bit when the power is turned off. The + application clears this bit after the power is turned on and the + PHY clock is up. */ + uint32_t pwrclmp : 1; /**< Power Clamp (PwrClmp) + This bit is only valid in Partial Power-Down mode. The + application sets this bit before the power is turned off to clamp + the signals between the power-on modules and the power-off + modules. The application clears the bit to disable the clamping + before the power is turned on. */ + uint32_t gatehclk : 1; /**< Gate Hclk (GateHclk) + The application sets this bit to gate hclk to modules other than + the AHB Slave and Master and wakeup logic when the USB is + suspended or the session is not valid. The application clears + this bit when the USB is resumed or a new session starts. */ + uint32_t stoppclk : 1; /**< Stop Pclk (StopPclk) + The application sets this bit to stop the PHY clock (phy_clk) + when the USB is suspended, the session is not valid, or the + device is disconnected. The application clears this bit when the + USB is resumed or a new session starts. */ +#else + uint32_t stoppclk : 1; + uint32_t gatehclk : 1; + uint32_t pwrclmp : 1; + uint32_t rstpdwnmodule : 1; + uint32_t physuspended : 1; + uint32_t reserved_5_31 : 27; +#endif + } s; + struct cvmx_usbcx_pcgcctl_s cn30xx; + struct cvmx_usbcx_pcgcctl_s cn31xx; + struct cvmx_usbcx_pcgcctl_s cn50xx; + struct cvmx_usbcx_pcgcctl_s cn52xx; + struct cvmx_usbcx_pcgcctl_s cn52xxp1; + struct cvmx_usbcx_pcgcctl_s cn56xx; + struct cvmx_usbcx_pcgcctl_s cn56xxp1; +}; +typedef union cvmx_usbcx_pcgcctl cvmx_usbcx_pcgcctl_t; + +#endif |