diff options
Diffstat (limited to 'sys/contrib/ncsw/inc/Peripherals/fm_port_ext.h')
| -rw-r--r-- | sys/contrib/ncsw/inc/Peripherals/fm_port_ext.h | 2196 |
1 files changed, 2196 insertions, 0 deletions
diff --git a/sys/contrib/ncsw/inc/Peripherals/fm_port_ext.h b/sys/contrib/ncsw/inc/Peripherals/fm_port_ext.h new file mode 100644 index 0000000..d1df4ea --- /dev/null +++ b/sys/contrib/ncsw/inc/Peripherals/fm_port_ext.h @@ -0,0 +1,2196 @@ +/* Copyright (c) 2008-2011 Freescale Semiconductor, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/**************************************************************************//** + @File fm_port_ext.h + + @Description FM-Port Application Programming Interface. +*//***************************************************************************/ +#ifndef __FM_PORT_EXT +#define __FM_PORT_EXT + +#include "error_ext.h" +#include "std_ext.h" +#include "fm_pcd_ext.h" +#include "fm_ext.h" +#include "net_ext.h" + + +/**************************************************************************//** + + @Group FM_grp Frame Manager API + + @Description FM API functions, definitions and enums + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Group FM_PORT_grp FM Port + + @Description FM Port API + + The FM uses a general module called "port" to represent a Tx port + (MAC), an Rx port (MAC), offline parsing flow or host command + flow. There may be up to 17 (may change) ports in an FM - 5 Tx + ports (4 for the 1G MACs, 1 for the 10G MAC), 5 Rx Ports, and 7 + Host command/Offline parsing ports. The SW driver manages these + ports as sub-modules of the FM, i.e. after an FM is initialized, + its ports may be initialized and operated upon. + + The port is initialized aware of its type, but other functions on + a port may be indifferent to its type. When necessary, the driver + verifies coherency and returns error if applicable. + + On initialization, user specifies the port type and it's index + (relative to the port's type). Host command and Offline parsing + ports share the same id range, I.e user may not initialized host + command port 0 and offline parsing port 0. + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Description An enum for defining port PCD modes. + This enum defines the superset of PCD engines support - i.e. not + all engines have to be used, but all have to be enabled. The real + flow of a specific frame depends on the PCD configuration and the + frame headers and payload. +*//***************************************************************************/ +typedef enum e_FmPortPcdSupport { + e_FM_PORT_PCD_SUPPORT_NONE = 0, /**< BMI to BMI, PCD is not used */ + e_FM_PORT_PCD_SUPPORT_PRS_ONLY, /**< Use only Parser */ + e_FM_PORT_PCD_SUPPORT_PLCR_ONLY, /**< Use only Policer */ + e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR, /**< Use Parser and Policer */ + e_FM_PORT_PCD_SUPPORT_PRS_AND_KG, /**< Use Parser and Keygen */ + e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC, /**< Use Parser, Keygen and Coarse Classification */ + e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR, + /**< Use all PCD engines */ + e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR /**< Use Parser, Keygen and Policer */ +#ifdef FM_CAPWAP_SUPPORT + , + e_FM_PORT_PCD_SUPPORT_CC_ONLY, /**< Use only Coarse Classification */ + e_FM_PORT_PCD_SUPPORT_CC_AND_KG, /**< Use Coarse Classification,and Keygen */ + e_FM_PORT_PCD_SUPPORT_CC_AND_KG_AND_PLCR /**< Use Coarse Classification, Keygen and Policer */ +#endif /* FM_CAPWAP_SUPPORT */ +} e_FmPortPcdSupport; + +/**************************************************************************//** + @Description Port interrupts +*//***************************************************************************/ +typedef enum e_FmPortExceptions { + e_FM_PORT_EXCEPTION_IM_BUSY /**< Independent-Mode Rx-BUSY */ +} e_FmPortExceptions; + + +/**************************************************************************//** + @Collection General FM Port defines +*//***************************************************************************/ +#define FM_PORT_PRS_RESULT_NUM_OF_WORDS 8 /**< Number of 4 bytes words in parser result */ +/* @} */ + +/**************************************************************************//** + @Collection FM Frame error +*//***************************************************************************/ +typedef uint32_t fmPortFrameErrSelect_t; /**< typedef for defining Frame Descriptor errors */ + +#define FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT 0x04000000 /**< Offline parsing only! Unsupported Format */ +#define FM_PORT_FRM_ERR_LENGTH 0x02000000 /**< Offline parsing only! Length Error */ +#define FM_PORT_FRM_ERR_DMA 0x01000000 /**< DMA Data error */ +#ifdef FM_CAPWAP_SUPPORT +#define FM_PORT_FRM_ERR_NON_FM 0x00400000 /**< non Frame-Manager error; probably come from SEC that + was chained to FM */ +#endif /* FM_CAPWAP_SUPPORT */ +#define FM_PORT_FRM_ERR_PHYSICAL 0x00080000 /**< Rx FIFO overflow, FCS error, code error, running disparity + error (SGMII and TBI modes), FIFO parity error. PHY + Sequence error, PHY error control character detected. */ +#define FM_PORT_FRM_ERR_SIZE 0x00040000 /**< Frame too long OR Frame size exceeds max_length_frame */ +#define FM_PORT_FRM_ERR_CLS_DISCARD 0x00020000 /**< classification discard */ +#define FM_PORT_FRM_ERR_EXTRACTION 0x00008000 /**< Extract Out of Frame */ +#define FM_PORT_FRM_ERR_NO_SCHEME 0x00004000 /**< No Scheme Selected */ +#define FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW 0x00002000 /**< Keysize Overflow */ +#define FM_PORT_FRM_ERR_COLOR_YELLOW 0x00000400 /**< Frame color is yellow */ +#define FM_PORT_FRM_ERR_COLOR_RED 0x00000800 /**< Frame color is red */ +#define FM_PORT_FRM_ERR_ILL_PLCR 0x00000200 /**< Illegal Policer Profile selected */ +#define FM_PORT_FRM_ERR_PLCR_FRAME_LEN 0x00000100 /**< Policer frame length error */ +#define FM_PORT_FRM_ERR_PRS_TIMEOUT 0x00000080 /**< Parser Time out Exceed */ +#define FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT 0x00000040 /**< Invalid Soft Parser instruction */ +#define FM_PORT_FRM_ERR_PRS_HDR_ERR 0x00000020 /**< Header error was identified during parsing */ +#define FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED 0x00000008 /**< Frame parsed beyind 256 first bytes */ +#define FM_PORT_FRM_ERR_PROCESS_TIMEOUT 0x00000001 /**< FPM Frame Processing Timeout Exceeded */ +/* @} */ + + + +/**************************************************************************//** + @Group FM_PORT_init_grp FM Port Initialization Unit + + @Description FM Port Initialization Unit + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Description Exceptions user callback routine, will be called upon an + exception passing the exception identification. + + @Param[in] h_App - User's application descriptor. + @Param[in] exception - The exception. + *//***************************************************************************/ +typedef void (t_FmPortExceptionCallback) (t_Handle h_App, e_FmPortExceptions exception); + +/**************************************************************************//** + @Description User callback function called by driver with received data. + + User provides this function. Driver invokes it. + + @Param[in] h_App Application's handle originally specified to + the API Config function + @Param[in] p_Data A pointer to data received + @Param[in] length length of received data + @Param[in] status receive status and errors + @Param[in] position position of buffer in frame + @Param[in] h_BufContext A handle of the user acossiated with this buffer + + @Retval e_RX_STORE_RESPONSE_CONTINUE - order the driver to continue Rx + operation for all ready data. + @Retval e_RX_STORE_RESPONSE_PAUSE - order the driver to stop Rx operation. +*//***************************************************************************/ +typedef e_RxStoreResponse (t_FmPortImRxStoreCallback) (t_Handle h_App, + uint8_t *p_Data, + uint16_t length, + uint16_t status, + uint8_t position, + t_Handle h_BufContext); + +/**************************************************************************//** + @Description User callback function called by driver when transmit completed. + + User provides this function. Driver invokes it. + + @Param[in] h_App Application's handle originally specified to + the API Config function + @Param[in] p_Data A pointer to data received + @Param[in] status transmit status and errors + @Param[in] lastBuffer is last buffer in frame + @Param[in] h_BufContext A handle of the user acossiated with this buffer + *//***************************************************************************/ +typedef void (t_FmPortImTxConfCallback) (t_Handle h_App, + uint8_t *p_Data, + uint16_t status, + t_Handle h_BufContext); + +/**************************************************************************//** + @Description A structure of information about each of the external + buffer pools used by the port, +*//***************************************************************************/ +typedef struct t_FmPortExtPoolParams { + uint8_t id; /**< External buffer pool id */ + uint16_t size; /**< External buffer pool buffer size */ +} t_FmPortExtPoolParams; + +/**************************************************************************//** + @Description A structure for informing the driver about the external + buffer pools allocated in the BM and used by this port. +*//***************************************************************************/ +typedef struct t_FmPortExtPools { + uint8_t numOfPoolsUsed; /**< Number of pools use by this port */ + t_FmPortExtPoolParams extBufPool[FM_PORT_MAX_NUM_OF_EXT_POOLS]; + /**< Parameters for each port */ +} t_FmPortExtPools; + +/**************************************************************************//** + @Description structure for additional Rx port parameters +*//***************************************************************************/ +typedef struct t_FmPortRxParams { + uint32_t errFqid; /**< Error Queue Id. */ + uint32_t dfltFqid; /**< Default Queue Id. */ + uint16_t liodnOffset; /**< Port's LIODN offset. */ + t_FmPortExtPools extBufPools; /**< Which external buffer pools are used + (up to FM_PORT_MAX_NUM_OF_EXT_POOLS), and their sizes. */ +} t_FmPortRxParams; + +/**************************************************************************//** + @Description structure for additional non-Rx port parameters +*//***************************************************************************/ +typedef struct t_FmPortNonRxParams { + uint32_t errFqid; /**< Error Queue Id. */ + uint32_t dfltFqid; /**< For Tx and HC - Default Confirmation queue, + 0 means no Tx confirmation for processed + frames. For OP - default Rx queue. */ + uint32_t qmChannel; /**< QM-channel dedicated to this port; will be used + by the FM for dequeue. */ +#ifdef FM_OP_PARTITION_ERRATA_FMANx8 + uint16_t opLiodnOffset; /**< For Offline Parsing ports only. Port's LIODN offset. */ +#endif /* FM_OP_PARTITION_ERRATA_FMANx8 */ +} t_FmPortNonRxParams; + +/**************************************************************************//** + @Description structure for additional Rx port parameters +*//***************************************************************************/ +typedef struct t_FmPortImRxTxParams { + t_Handle h_FmMuram; /**< A handle of the FM-MURAM partition */ + uint16_t liodnOffset; /**< For Rx ports only. Port's LIODN Offset. */ + uint8_t dataMemId; /**< Memory partition ID for data buffers */ + uint32_t dataMemAttributes; /**< Memory attributes for data buffers */ + t_BufferPoolInfo rxPoolParams; /**< For Rx ports only. */ + t_FmPortImRxStoreCallback *f_RxStore; /**< For Rx ports only. */ + t_FmPortImTxConfCallback *f_TxConf; /**< For Tx ports only. */ +} t_FmPortImRxTxParams; + +/**************************************************************************//** + @Description Union for additional parameters depending on port type +*//***************************************************************************/ +typedef union u_FmPortSpecificParams { + t_FmPortImRxTxParams imRxTxParams; /**< Rx/Tx Independent-Mode port parameter structure */ + t_FmPortRxParams rxParams; /**< Rx port parameters structure */ + t_FmPortNonRxParams nonRxParams; /**< Non-Rx port parameters structure */ +} u_FmPortSpecificParams; + +/**************************************************************************//** + @Description structure representing FM initialization parameters +*//***************************************************************************/ +typedef struct t_FmPortParams { + uintptr_t baseAddr; /**< Virtual Address of memory mapped FM Port registers.*/ + t_Handle h_Fm; /**< A handle to the FM object this port related to */ + e_FmPortType portType; /**< Port type */ + uint8_t portId; /**< Port Id - relative to type */ + bool independentModeEnable; + /**< This port is Independent-Mode - Used for Rx/Tx ports only! */ + uint16_t liodnBase; /**< Irrelevant for P4080 rev 1. LIODN base for this port, to be + used together with LIODN offset. */ + u_FmPortSpecificParams specificParams; /**< Additional parameters depending on port + type. */ + + t_FmPortExceptionCallback *f_Exception; /**< Callback routine to be called of PCD exception */ + t_Handle h_App; /**< A handle to an application layer object; This handle will + be passed by the driver upon calling the above callbacks */ +} t_FmPortParams; + + +/**************************************************************************//** + @Function FM_PORT_Config + + @Description Creates descriptor for the FM PORT module. + + The routine returns a handle (descriptor) to the FM PORT object. + This descriptor must be passed as first parameter to all other + FM PORT function calls. + + No actual initialization or configuration of FM hardware is + done by this routine. + + @Param[in] p_FmPortParams - Pointer to data structure of parameters + + @Retval Handle to FM object, or NULL for Failure. +*//***************************************************************************/ +t_Handle FM_PORT_Config(t_FmPortParams *p_FmPortParams); + +/**************************************************************************//** + @Function FM_PORT_Init + + @Description Initializes the FM PORT module + + @Param[in] h_FmPort - FM PORT module descriptor + + @Return E_OK on success; Error code otherwise. +*//***************************************************************************/ +t_Error FM_PORT_Init(t_Handle h_FmPort); + +/**************************************************************************//** + @Function FM_PORT_Free + + @Description Frees all resources that were assigned to FM PORT module. + + Calling this routine invalidates the descriptor. + + @Param[in] h_FmPort - FM PORT module descriptor + + @Return E_OK on success; Error code otherwise. +*//***************************************************************************/ +t_Error FM_PORT_Free(t_Handle h_FmPort); + + +/**************************************************************************//** + @Group FM_PORT_advanced_init_grp FM Port Advanced Configuration Unit + + @Description Configuration functions used to change default values. + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Description enum for defining QM frame dequeue +*//***************************************************************************/ +typedef enum e_FmPortDeqType { + e_FM_PORT_DEQ_TYPE1, /**< Dequeue from the SP channel - with priority precedence, + and Intra-Class Scheduling respected. */ + e_FM_PORT_DEQ_TYPE2, /**< Dequeue from the SP channel - with active FQ precedence, + and Intra-Class Scheduling respected. */ + e_FM_PORT_DEQ_TYPE3 /**< Dequeue from the SP channel - with active FQ precedence, + and override Intra-Class Scheduling */ +} e_FmPortDeqType; + +#ifdef FM_QMI_DEQ_OPTIONS_SUPPORT +/**************************************************************************//** + @Description enum for defining QM frame dequeue +*//***************************************************************************/ +typedef enum e_FmPortDeqPrefetchOption { + e_FM_PORT_DEQ_NO_PREFETCH, /**< QMI preforms a dequeue action for a single frame + only when a dedicated portID Tnum is waiting. */ + e_FM_PORT_DEQ_PARTIAL_PREFETCH, /**< QMI preforms a dequeue action for 3 frames when + one dedicated portId tnum is waiting. */ + e_FM_PORT_DEQ_FULL_PREFETCH /**< QMI preforms a dequeue action for 3 frames when + no dedicated portId tnums are waiting. */ + +} e_FmPortDeqPrefetchOption; +#endif /* FM_QMI_DEQ_OPTIONS_SUPPORT */ + +/**************************************************************************//** + @Description enum for defining port DMA swap mode +*//***************************************************************************/ +typedef enum e_FmPortDmaSwap { + e_FM_PORT_DMA_NO_SWP, /**< No swap, transfer data as is.*/ + e_FM_PORT_DMA_SWP_PPC_LE, /**< The transferred data should be swapped + in PowerPc Little Endian mode. */ + e_FM_PORT_DMA_SWP_BE /**< The transferred data should be swapped + in Big Endian mode */ +} e_FmPortDmaSwap; + +/**************************************************************************//** + @Description enum for defining port DMA cache attributes +*//***************************************************************************/ +typedef enum e_FmPortDmaCache { + e_FM_PORT_DMA_NO_STASH = 0, /**< Cacheable, no Allocate (No Stashing) */ + e_FM_PORT_DMA_STASH = 1 /**< Cacheable and Allocate (Stashing on) */ +} e_FmPortDmaCache; + +/**************************************************************************//** + @Description enum for defining port default color +*//***************************************************************************/ +typedef enum e_FmPortColor { + e_FM_PORT_COLOR_GREEN, /**< Default port color is green */ + e_FM_PORT_COLOR_YELLOW, /**< Default port color is yellow */ + e_FM_PORT_COLOR_RED, /**< Default port color is red */ + e_FM_PORT_COLOR_OVERRIDE /**< Ignore color */ +} e_FmPortColor; + +/**************************************************************************//** + @Description struct for defining Dual Tx rate limiting scale +*//***************************************************************************/ +typedef enum e_FmPortDualRateLimiterScaleDown { + e_FM_PORT_DUAL_RATE_LIMITER_NONE = 0, /**< Use only single rate limiter */ + e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_2, /**< Divide high rate limiter by 2 */ + e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_4, /**< Divide high rate limiter by 4 */ + e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_8 /**< Divide high rate limiter by 8 */ +} e_FmPortDualRateLimiterScaleDown; + + +/**************************************************************************//** + @Description struct for defining FM port resources +*//***************************************************************************/ +typedef struct t_FmPortRsrc { + uint32_t num; /**< Committed required resource */ + uint32_t extra; /**< Extra (not committed) required resource */ +} t_FmPortRsrc; + +/**************************************************************************//** + @Description struct for defining pool depletion criteria +*//***************************************************************************/ +typedef struct t_FmPortBufPoolDepletion { + bool numberOfPoolsModeEnable; /**< select mode in which pause frames will be sent after + a number of pools are depleted */ + uint8_t numOfPools; /**< the minimum number of depleted pools that will + invoke pause frames transmission. */ + bool poolsToConsider[BM_MAX_NUM_OF_POOLS]; + /**< For each pool, TRUE if it should be considered for + depletion (Note - this pool must be used by this port!) */ + bool singlePoolModeEnable; /**< select mode in which pause frames will be sent after + a single of pools are depleted */ + bool poolsToConsiderForSingleMode[BM_MAX_NUM_OF_POOLS]; + /**< For each pool, TRUE if it should be considered for + depletion (Note - this pool must be used by this port!) */ +} t_FmPortBufPoolDepletion; + +/**************************************************************************//** + @Description struct for defining observed pool depletion +*//***************************************************************************/ +typedef struct t_FmPortObservedBufPoolDepletion { + t_FmPortBufPoolDepletion poolDepletionParams;/**< parameters to define pool depletion */ + t_FmPortExtPools poolsParams; /**< Which external buffer pools are observed + (up to FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS), + and their sizes. */ +} t_FmPortObservedBufPoolDepletion; + +/**************************************************************************//** + @Description struct for defining Tx rate limiting +*//***************************************************************************/ +typedef struct t_FmPortRateLimit { + uint16_t maxBurstSize; /**< in kBytes for Tx ports, in frames + for offline parsing ports. (note that + for early chips burst size is + rounded up to a multiply of 1000 frames).*/ + uint32_t rateLimit; /**< in Kb/sec for Tx ports, in frame/sec for + offline parsing ports. Rate limit refers to + data rate (rather than line rate). */ + e_FmPortDualRateLimiterScaleDown rateLimitDivider; /**< For offline parsing ports only. Not-valid + for some earlier chip revisions */ +} t_FmPortRateLimit; + +/**************************************************************************//** + @Description struct for defining define the parameters of + the Rx port performance counters +*//***************************************************************************/ +typedef struct t_FmPortPerformanceCnt { + uint8_t taskCompVal; /**< Task compare value */ + uint8_t queueCompVal; /**< Rx queue/Tx confirm queue compare + value (unused for H/O) */ + uint8_t dmaCompVal; /**< Dma compare value */ + uint32_t fifoCompVal; /**< Fifo compare value (in bytes) */ +} t_FmPortPerformanceCnt; + +/**************************************************************************//** + @Description struct for defining buffer content. +*//***************************************************************************/ +typedef struct t_FmPortBufferPrefixContent { + uint16_t privDataSize; /**< Number of bytes to be left at the beginning + of the external buffer */ + bool passPrsResult; /**< TRUE to pass the parse result to/from the FM */ + bool passTimeStamp; /**< TRUE to pass the timeStamp to/from the FM */ + bool passHashResult; /**< TRUE to pass the KG hash result to/from the FM */ + bool passAllOtherPCDInfo;/**< Add all other Internal-Context information: + AD, hash-result, key, etc. */ + uint16_t dataAlign; /**< 0 to use driver's default alignment, other value + for selecting a data alignment (must be a + power of 2) */ +#ifdef DEBUG + bool passDebugInfo; /**< Debug-information */ +#endif /* DEBUG */ +#ifdef FM_CAPWAP_SUPPORT + uint8_t manipExtraSpace; /**< Maximum extra size needed (insertion-size minus removal-size) */ +#endif /* FM_CAPWAP_SUPPORT */ +} t_FmPortBufferPrefixContent; + +/**************************************************************************//** + @Description struct for defining backup Bm Pools. +*//***************************************************************************/ +typedef struct t_FmPortBackupBmPools { + uint8_t numOfBackupPools; /**< Number of BM backup pools - + must be smaller than the total number of + pools defined for the specified port.*/ + uint8_t poolIds[FM_PORT_MAX_NUM_OF_EXT_POOLS]; + /**< numOfBackupPools pool id's, specifying which + pools should be used only as backup. Pool + id's specified here must be a subset of the + pools used by the specified port.*/ +} t_FmPortBackupBmPools; + + +/**************************************************************************//** + @Function FM_PORT_ConfigDeqHighPriority + + @Description Calling this routine changes the dequeue priority in the + internal driver data base from its default configuration + [TRUE] + + May be used for Non-Rx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] highPri TRUE to select high priority, FALSE for normal operation. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigDeqHighPriority(t_Handle h_FmPort, bool highPri); + +/**************************************************************************//** + @Function FM_PORT_ConfigDeqType + + @Description Calling this routine changes the dequeue type parameter in the + internal driver data base from its default configuration + [e_FM_PORT_DEQ_TYPE1]. + + May be used for Non-Rx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] deqType According to QM definition. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigDeqType(t_Handle h_FmPort, e_FmPortDeqType deqType); + +#ifdef FM_QMI_DEQ_OPTIONS_SUPPORT +/**************************************************************************//** + @Function FM_PORT_ConfigDeqPrefetchOption + + @Description Calling this routine changes the dequeue prefetch option parameter in the + internal driver data base from its default configuration + [e_FM_PORT_DEQ_FULL_PREFETCH] + Note: Available for some chips only + + May be used for Non-Rx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] deqPrefetchOption New option + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigDeqPrefetchOption(t_Handle h_FmPort, e_FmPortDeqPrefetchOption deqPrefetchOption); +#endif /* FM_QMI_DEQ_OPTIONS_SUPPORT */ + +/**************************************************************************//** + @Function FM_PORT_ConfigDeqByteCnt + + @Description Calling this routine changes the dequeue byte count parameter in + the internal driver data base from its default configuration [2000]. + + May be used for Non-Rx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] deqByteCnt New byte count + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigDeqByteCnt(t_Handle h_FmPort, uint16_t deqByteCnt); + +/**************************************************************************//** + @Function FM_PORT_ConfigTxFifoMinFillLevel + + @Description Calling this routine changes the fifo minimum + fill level parameter in the internal driver data base + from its default configuration [0] + + May be used for Tx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] minFillLevel New value + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigTxFifoMinFillLevel(t_Handle h_FmPort, uint32_t minFillLevel); + +/**************************************************************************//** + @Function FM_PORT_ConfigTxFifoDeqPipelineDepth + + @Description Calling this routine changes the fifo dequeue + pipeline depth parameter in the internal driver data base + + from its default configuration: 1G ports: [2], + 10G port: [8] + + May be used for Tx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] deqPipelineDepth New value + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigTxFifoDeqPipelineDepth(t_Handle h_FmPort, uint8_t deqPipelineDepth); + +/**************************************************************************//** + @Function FM_PORT_ConfigTxFifoLowComfLevel + + @Description Calling this routine changes the fifo low comfort level + parameter in internal driver data base + from its default configuration [5] + + May be used for Tx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] fifoLowComfLevel New value + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigTxFifoLowComfLevel(t_Handle h_FmPort, uint32_t fifoLowComfLevel); + +/**************************************************************************//** + @Function FM_PORT_ConfigRxFifoThreshold + + @Description Calling this routine changes the threshold of the FIFO + fill level parameter in the internal driver data base + from its default configuration [BMI_MAX_FIFO_SIZE] + + If the total number of buffers which are + currently in use and associated with the + specific RX port exceed this threshold, the + BMI will signal the MAC to send a pause frame + over the link. + + May be used for Rx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] fifoThreshold New value + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigRxFifoThreshold(t_Handle h_FmPort, uint32_t fifoThreshold); + +/**************************************************************************//** + @Function FM_PORT_ConfigRxFifoPriElevationLevel + + @Description Calling this routine changes the priority elevation level + parameter in the internal driver data base from its default + configuration [BMI_MAX_FIFO_SIZE] + + If the total number of buffers which are currently in use and + associated with the specific RX port exceed the amount specified + in priElevationLevel, BMI will signal the main FM's DMA to + elevate the FM priority on the system bus. + + May be used for Rx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] priElevationLevel New value + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigRxFifoPriElevationLevel(t_Handle h_FmPort, uint32_t priElevationLevel); + +/**************************************************************************//** + @Function FM_PORT_ConfigBufferPrefixContent + + @Description Defines the structure, size and content of the application buffer. + The prefix will + In Tx ports, if 'passPrsResult', the application + should set a value to their offsets in the prefix of + the FM will save the first 'privDataSize', than, + depending on 'passPrsResult' and 'passTimeStamp', copy parse result + and timeStamp, and the packet itself (in this order), to the + application buffer, and to offset. + Calling this routine changes the buffer margins definitions + in the internal driver data base from its default + configuration: Data size: [0] + Pass Parser result: [FALSE]. + Pass timestamp: [FALSE]. + + May be used for all ports + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in,out] p_FmPortBufferPrefixContent A structure of parameters describing the + structure of the buffer. + Out parameter: Start margin - offset + of data from start of external buffer. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigBufferPrefixContent(t_Handle h_FmPort, t_FmPortBufferPrefixContent *p_FmPortBufferPrefixContent); + + +/**************************************************************************//** + @Function FM_PORT_ConfigCheksumLastBytesIgnore + + @Description Calling this routine changes the number of checksum bytes to ignore + parameter in the internal driver data base from its default configuration + [0] + + May be used by Tx & Rx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] cheksumLastBytesIgnore New value + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigCheksumLastBytesIgnore(t_Handle h_FmPort, uint8_t cheksumLastBytesIgnore); + +/**************************************************************************//** + @Function FM_PORT_ConfigCutBytesFromEnd + + @Description Calling this routine changes the number of bytes to cut from a + frame's end parameter in the internal driver data base + from its default configuration [4] + Note that if the result of (frame length before chop - cutBytesFromEnd) is + less than 14 bytes, the chop operation is not executed. + + May be used for Rx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] cutBytesFromEnd New value + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigCutBytesFromEnd(t_Handle h_FmPort, uint8_t cutBytesFromEnd); + +/**************************************************************************//** + @Function FM_PORT_ConfigPoolDepletion + + @Description Calling this routine enables pause frame generation depending on the + depletion status of BM pools. It also defines the conditions to activate + this functionality. By default, this functionality is disabled. + + May be used for Rx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_BufPoolDepletion A structure of pool depletion parameters + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigPoolDepletion(t_Handle h_FmPort, t_FmPortBufPoolDepletion *p_BufPoolDepletion); + +/**************************************************************************//** + @Function FM_PORT_ConfigObservedPoolDepletion + + @Description Calling this routine enables a mechanism to stop port enqueue + depending on the depletion status of selected BM pools. + It also defines the conditions to activate + this functionality. By default, this functionality is disabled. + + Note: Available for some chips only + + May be used for Offline Parsing ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_FmPortObservedBufPoolDepletion A structure of parameters for pool depletion. + + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigObservedPoolDepletion(t_Handle h_FmPort, t_FmPortObservedBufPoolDepletion *p_FmPortObservedBufPoolDepletion); + +/**************************************************************************//** + @Function FM_PORT_ConfigExtBufPools + + @Description This routine should be called for offline parsing ports + that internally use BM buffer pools. In such cases, e.g. for fragmentation and + re-assembly, the FM needs new BM buffers. By calling this routine the user + specifies the BM buffer pools that should be used. + + Note: Available for some chips only + + May be used for Offline Parsing ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_FmPortExtPools A structure of parameters for the external pools. + + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigExtBufPools(t_Handle h_FmPort, t_FmPortExtPools *p_FmPortExtPools); + +/**************************************************************************//** + @Function FM_PORT_ConfigBackupPools + + @Description Calling this routine allows the configuration of some of the BM pools + defined for this port as backup pools. + A pool configured to be a backup pool will be used only if all other + enabled non-backup pools are depleted. + + May be used for Rx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_FmPortBackupBmPools An array of pool id's. All pools specified here will + be defined as backup pools. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigBackupPools(t_Handle h_FmPort, t_FmPortBackupBmPools *p_FmPortBackupBmPools); + +/**************************************************************************//** + @Function FM_PORT_ConfigFrmDiscardOverride + + @Description Calling this routine changes the error frames destination parameter + in the internal driver data base from its default configuration: + override = [FALSE] + + May be used for Rx and offline parsing ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] override TRUE to override dicarding of error frames and + enqueueing them to error queue. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigFrmDiscardOverride(t_Handle h_FmPort, bool override); + +/**************************************************************************//** + @Function FM_PORT_ConfigErrorsToDiscard + + @Description Calling this routine changes the behaviour on error parameter + in the internal driver data base from its default configuration: + [FM_PORT_FRM_ERR_CLS_DISCARD]. + If a requested error was previously defined as "ErrorsToEnqueue" it's + definition will change and the frame will be discarded. + Errors that were not defined either as "ErrorsToEnqueue" nor as + "ErrorsToDiscard", will be forwarded to CPU. + + + May be used for Rx and offline parsing ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] errs A list of errors to discard + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigErrorsToDiscard(t_Handle h_FmPort, fmPortFrameErrSelect_t errs); + +/**************************************************************************//** + @Function FM_PORT_ConfigDmaSwapData + + @Description Calling this routine changes the DMA swap data aparameter + in the internal driver data base from its default + configuration [e_FM_PORT_DMA_NO_SWP] + + May be used for all port types + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] swapData New selection + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigDmaSwapData(t_Handle h_FmPort, e_FmPortDmaSwap swapData); + +/**************************************************************************//** + @Function FM_PORT_ConfigDmaIcCacheAttr + + @Description Calling this routine changes the internal context cache + attribute parameter in the internal driver data base + from its default configuration [e_FM_PORT_DMA_NO_STASH] + + May be used for all port types + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] intContextCacheAttr New selection + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigDmaIcCacheAttr(t_Handle h_FmPort, e_FmPortDmaCache intContextCacheAttr); + +/**************************************************************************//** + @Function FM_PORT_ConfigDmaHdrAttr + + @Description Calling this routine changes the header cache + attribute parameter in the internal driver data base + from its default configuration [e_FM_PORT_DMA_NO_STASH] + + May be used for all port types + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] headerCacheAttr New selection + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigDmaHdrAttr(t_Handle h_FmPort, e_FmPortDmaCache headerCacheAttr); + +/**************************************************************************//** + @Function FM_PORT_ConfigDmaScatterGatherAttr + + @Description Calling this routine changes the scatter gather cache + attribute parameter in the internal driver data base + from its default configuration [e_FM_PORT_DMA_NO_STASH] + + May be used for all port types + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] scatterGatherCacheAttr New selection + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigDmaScatterGatherAttr(t_Handle h_FmPort, e_FmPortDmaCache scatterGatherCacheAttr); + +/**************************************************************************//** + @Function FM_PORT_ConfigDmaWriteOptimize + + @Description Calling this routine changes the write optimization + parameter in the internal driver data base + from its default configuration: optimize = [TRUE] + + May be used for non-Tx port types + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] optimize TRUE to enable optimization, FALSE for normal operation + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigDmaWriteOptimize(t_Handle h_FmPort, bool optimize); + +/**************************************************************************//** + @Function FM_PORT_ConfigDfltColor + + @Description Calling this routine changes the internal default color parameter + in the internal driver data base + from its default configuration [e_FM_PORT_COLOR_GREEN] + + May be used for all port types + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] color New selection + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigDfltColor(t_Handle h_FmPort, e_FmPortColor color); + +/**************************************************************************//** + @Function FM_PORT_ConfigSyncReq + + @Description Calling this routine changes the synchronization attribute parameter + in the internal driver data base from its default configuration: + syncReq = [TRUE] + + May be used for all port types + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] syncReq TRUE to request synchronization, FALSE otherwize. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigSyncReq(t_Handle h_FmPort, bool syncReq); + +/**************************************************************************//** + @Function FM_PORT_ConfigForwardReuseIntContext + + @Description This routine is relevant for Rx ports that are routed to offline + parsing. It changes the internal context reuse option + in the internal driver data base from its default configuration: + reuse = [FALSE] + + May be used for Rx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] reuse TRUE to reuse internal context on frames + forwarded to offline parsing. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigForwardReuseIntContext(t_Handle h_FmPort, bool reuse); + +/**************************************************************************//** + @Function FM_PORT_ConfigDontReleaseTxBufToBM + + @Description This routine should be called if no Tx confirmation + is done, and yet buffers should not be released to the BM. + Normally, buffers are returned using the Tx confirmation + process. When Tx confirmation is not used (defFqid=0), + buffers are typically released to the BM. This routine + may be called to avoid this behavior and not release the + buffers. + + May be used for Tx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ConfigDontReleaseTxBufToBM(t_Handle h_FmPort); + +/**************************************************************************//** + @Function FM_PORT_ConfigIMMaxRxBufLength + + @Description Changes the maximum receive buffer length from its default + configuration: Closest rounded down power of 2 value of the + data buffer size. + + The maximum receive buffer length directly affects the structure + of received frames (single- or multi-buffered) and the performance + of both the FM and the driver. + + The selection between single- or multi-buffered frames should be + done according to the characteristics of the specific application. + The recommended mode is to use a single data buffer per packet, + as this mode provides the best performance. However, the user can + select to use multiple data buffers per packet. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] newVal Maximum receive buffer length (in bytes). + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). + This routine is to be used only if Independent-Mode is enabled. +*//***************************************************************************/ +t_Error FM_PORT_ConfigIMMaxRxBufLength(t_Handle h_FmPort, uint16_t newVal); + +/**************************************************************************//** + @Function FM_PORT_ConfigIMRxBdRingLength + + @Description Changes the receive BD ring length from its default + configuration:[128] + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] newVal The desired BD ring length. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). + This routine is to be used only if Independent-Mode is enabled. +*//***************************************************************************/ +t_Error FM_PORT_ConfigIMRxBdRingLength(t_Handle h_FmPort, uint16_t newVal); + +/**************************************************************************//** + @Function FM_PORT_ConfigIMTxBdRingLength + + @Description Changes the transmit BD ring length from its default + configuration:[16] + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] newVal The desired BD ring length. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). + This routine is to be used only if Independent-Mode is enabled. +*//***************************************************************************/ +t_Error FM_PORT_ConfigIMTxBdRingLength(t_Handle h_FmPort, uint16_t newVal); + +/**************************************************************************//** + @Function FM_PORT_ConfigIMFmanCtrlExternalStructsMemory + + @Description Configures memory partition and attributes for FMan-Controller + data structures (e.g. BD rings). + Calling this routine changes the internal driver data base + from its default configuration + [0 , MEMORY_ATTR_CACHEABLE]. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] memId Memory partition ID. + @Param[in] memAttributes Memory attributes mask (a combination of MEMORY_ATTR_x flags). + + @Return E_OK on success; Error code otherwise. +*//***************************************************************************/ +t_Error FM_PORT_ConfigIMFmanCtrlExternalStructsMemory(t_Handle h_FmPort, + uint8_t memId, + uint32_t memAttributes); + +/**************************************************************************//** + @Function FM_PORT_ConfigIMPolling + + @Description Changes the Rx flow from interrupt driven (default) to polling. + + @Param[in] h_FmPort A handle to a FM Port module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). + This routine is to be used only if Independent-Mode is enabled. +*//***************************************************************************/ +t_Error FM_PORT_ConfigIMPolling(t_Handle h_FmPort); + +/** @} */ /* end of FM_PORT_advanced_init_grp group */ +/** @} */ /* end of FM_PORT_init_grp group */ + + +/**************************************************************************//** + @Group FM_PORT_runtime_control_grp FM Port Runtime Control Unit + + @Description FM Port Runtime control unit API functions, definitions and enums. + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Description enum for defining FM Port counters +*//***************************************************************************/ +typedef enum e_FmPortCounters { + e_FM_PORT_COUNTERS_CYCLE, /**< BMI performance counter */ + e_FM_PORT_COUNTERS_TASK_UTIL, /**< BMI performance counter */ + e_FM_PORT_COUNTERS_QUEUE_UTIL, /**< BMI performance counter */ + e_FM_PORT_COUNTERS_DMA_UTIL, /**< BMI performance counter */ + e_FM_PORT_COUNTERS_FIFO_UTIL, /**< BMI performance counter */ + e_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION, /**< BMI Rx only performance counter */ + e_FM_PORT_COUNTERS_FRAME, /**< BMI statistics counter */ + e_FM_PORT_COUNTERS_DISCARD_FRAME, /**< BMI statistics counter */ + e_FM_PORT_COUNTERS_DEALLOC_BUF, /**< BMI deallocate buffer statistics counter */ + e_FM_PORT_COUNTERS_RX_BAD_FRAME, /**< BMI Rx only statistics counter */ + e_FM_PORT_COUNTERS_RX_LARGE_FRAME, /**< BMI Rx only statistics counter */ + e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD, /**< BMI Rx only statistics counter */ + e_FM_PORT_COUNTERS_RX_FILTER_FRAME, /**< BMI Rx & OP only statistics counter */ + e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR, /**< BMI Rx, OP & HC only statistics counter */ + e_FM_PORT_COUNTERS_WRED_DISCARD, /**< BMI OP & HC only statistics counter */ + e_FM_PORT_COUNTERS_LENGTH_ERR, /**< BMI non-Rx statistics counter */ + e_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT, /**< BMI non-Rx statistics counter */ + e_FM_PORT_COUNTERS_DEQ_TOTAL, /**< QMI counter */ + e_FM_PORT_COUNTERS_ENQ_TOTAL, /**< QMI counter */ + e_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT, /**< QMI counter */ + e_FM_PORT_COUNTERS_DEQ_CONFIRM /**< QMI counter */ +} e_FmPortCounters; + +/**************************************************************************//** + @Description Structure for Port id parameters. + Fields commented 'IN' are passed by the port module to be used + by the FM module. + Fields commented 'OUT' will be filled by FM before returning to port. +*//***************************************************************************/ +typedef struct t_FmPortCongestionGrps { + uint16_t numOfCongestionGrpsToConsider; /**< The number of required congestion groups + to define the size of the following array */ + uint8_t congestionGrpsToConsider[FM_PORT_NUM_OF_CONGESTION_GRPS]; + /**< An array of 'numOfCongestionGrpsToConsider' + describing the groups */ +} t_FmPortCongestionGrps; + + + +#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)) +/**************************************************************************//** + @Function FM_PORT_DumpRegs + + @Description Dump all regs. + + Calling this routine invalidates the descriptor. + + @Param[in] h_FmPort - FM PORT module descriptor + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_DumpRegs(t_Handle h_FmPort); +#endif /* (defined(DEBUG_ERRORS) && ... */ + +/**************************************************************************//** + @Function FM_PORT_GetBufferDataOffset + + @Description Relevant for Rx ports. + Returns the data offset from the beginning of the data buffer + + @Param[in] h_FmPort - FM PORT module descriptor + + @Return data offset. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +uint32_t FM_PORT_GetBufferDataOffset(t_Handle h_FmPort); + +/**************************************************************************//** + @Function FM_PORT_GetBufferICInfo + + @Description Returns the Internal Context offset from the beginning of the data buffer + + @Param[in] h_FmPort - FM PORT module descriptor + @Param[in] p_Data - A pointer to the data buffer. + + @Return Internal context info pointer on success, NULL if 'allOtherInfo' was not + configured for this port. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +uint8_t * FM_PORT_GetBufferICInfo(t_Handle h_FmPort, char *p_Data); + +#ifdef DEBUG +/**************************************************************************//** + @Function FM_PORT_GetBufferDebugInfo + + @Description Returns the debug info offset from the beginning of the data buffer + + @Param[in] h_FmPort - FM PORT module descriptor + @Param[in] p_Data - A pointer to the data buffer. + + @Return Debug info pointer on success, NULL if 'passDebugInfo' was not + configured for this port. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +uint8_t * FM_PORT_GetBufferDebugInfo(t_Handle h_FmPort, char *p_Data); +#endif /* DEBUG */ + +/**************************************************************************//** + @Function FM_PORT_GetBufferPrsResult + + @Description Returns the pointer to the parse result in the data buffer. + In Rx ports this is relevant after reception, if parse + result is configured to be part of the data passed to the + application. For non Rx ports it may be used to get the pointer + of the area in the buffer where parse result should be + initialized - if so configured. + See FM_PORT_ConfigBufferPrefixContent for data buffer prefix + configuration. + + @Param[in] h_FmPort - FM PORT module descriptor + @Param[in] p_Data - A pointer to the data buffer. + + @Return Parse result pointer on success, NULL if parse result was not + configured for this port. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_FmPrsResult * FM_PORT_GetBufferPrsResult(t_Handle h_FmPort, char *p_Data); + +/**************************************************************************//** + @Function FM_PORT_GetBufferTimeStamp + + @Description Returns the time stamp in the data buffer. + Relevant for Rx ports for getting the buffer time stamp. + See FM_PORT_ConfigBufferPrefixContent for data buffer prefix + configuration. + + @Param[in] h_FmPort - FM PORT module descriptor + @Param[in] p_Data - A pointer to the data buffer. + + @Return A pointer to the hash result on success, NULL otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +uint64_t * FM_PORT_GetBufferTimeStamp(t_Handle h_FmPort, char *p_Data); + +/**************************************************************************//** + @Function FM_PORT_GetBufferHashResult + + @Description Given a data buffer, on the condition that hash result was defined + as a part of the buffer content (see FM_PORT_ConfigBufferPrefixContent) + this routine will return the pointer to the hash result location in the + buffer prefix. + + @Param[in] h_FmPort - FM PORT module descriptor + @Param[in] p_Data - A pointer to the data buffer. + + @Return A pointer to the hash result on success, NULL otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +uint8_t * FM_PORT_GetBufferHashResult(t_Handle h_FmPort, char *p_Data); + +/**************************************************************************//** + @Function FM_PORT_Disable + + @Description Gracefully disable an FM port. The port will not start new tasks after all + tasks associated with the port are terminated. + + @Param[in] h_FmPort A handle to a FM Port module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). + This is a blocking routine, it returns after port is + gracefully stopped, i.e. the port will not except new frames, + but it will finish all frames or tasks which were already began +*//***************************************************************************/ +t_Error FM_PORT_Disable(t_Handle h_FmPort); + +/**************************************************************************//** + @Function FM_PORT_Enable + + @Description A runtime routine provided to allow disable/enable of port. + + @Param[in] h_FmPort A handle to a FM Port module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_Enable(t_Handle h_FmPort); + +/**************************************************************************//** + @Function FM_PORT_SetRateLimit + + @Description Calling this routine enables rate limit algorithm. + By default, this functionality is disabled. + Note that rate-limit mechanism uses the FM time stamp. + The selected rate limit specified here would be + rounded DOWN to the nearest 16M. + + May be used for Tx and offline parsing ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_RateLimit A structure of rate limit parameters + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_SetRateLimit(t_Handle h_FmPort, t_FmPortRateLimit *p_RateLimit); + +/**************************************************************************//** + @Function FM_PORT_DeleteRateLimit + + @Description Calling this routine disables and clears rate limit + initialization. + + May be used for Tx and offline parsing ports only + + @Param[in] h_FmPort A handle to a FM Port module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_DeleteRateLimit(t_Handle h_FmPort); + +/**************************************************************************//** + @Function FM_PORT_SetStatisticsCounters + + @Description Calling this routine enables/disables port's statistics counters. + By default, counters are enabled. + + May be used for all port types + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] enable TRUE to enable, FALSE to disable. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_SetStatisticsCounters(t_Handle h_FmPort, bool enable); + +/**************************************************************************//** + @Function FM_PORT_SetFrameQueueCounters + + @Description Calling this routine enables/disables port's enqueue/dequeue counters. + By default, counters are enabled. + + May be used for all ports + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] enable TRUE to enable, FALSE to disable. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_SetFrameQueueCounters(t_Handle h_FmPort, bool enable); + +/**************************************************************************//** + @Function FM_PORT_SetPerformanceCounters + + @Description Calling this routine enables/disables port's performance counters. + By default, counters are enabled. + + May be used for all port types + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] enable TRUE to enable, FALSE to disable. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_SetPerformanceCounters(t_Handle h_FmPort, bool enable); + +/**************************************************************************//** + @Function FM_PORT_SetPerformanceCounters + + @Description Calling this routine defines port's performance + counters parameters. + + May be used for all port types + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_FmPortPerformanceCnt A pointer to a structure of performance + counters parameters. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_SetPerformanceCountersParams(t_Handle h_FmPort, t_FmPortPerformanceCnt *p_FmPortPerformanceCnt); + +/**************************************************************************//** + @Function FM_PORT_AnalyzePerformanceParams + + @Description User may call this routine to so the driver will analyze if the + basic performance parameters are correct and also the driver may + suggest of improvments; The basic parameters are FIFO sizes, number + of DMAs and number of TNUMs for the port. + + May be used for all port types + + @Param[in] h_FmPort A handle to a FM Port module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_AnalyzePerformanceParams(t_Handle h_FmPort); + +/**************************************************************************//** + @Function FM_PORT_SetNumOfOpenDmas + + @Description Calling this routine updates the number of open DMA requested for + this port. + + + May be used for all port types. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_NumOfOpenDmas A structure of resource requested parameters + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_SetNumOfOpenDmas(t_Handle h_FmPort, t_FmPortRsrc *p_NumOfOpenDmas); + +/**************************************************************************//** + @Function FM_PORT_SetNumOfTasks + + @Description Calling this routine updates the number of tasks requested for + this port. + + May be used for all port types. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_NumOfTasks A structure of resource requested parameters + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_SetNumOfTasks(t_Handle h_FmPort, t_FmPortRsrc *p_NumOfTasks); + +/**************************************************************************//** + @Function FM_PORT_SetSizeOfFifo + + @Description Calling this routine updates the Fifo size resource requested for + this port. + + May be used for all port types - note that only Rx has 'extra' + fifo size. For other ports 'extra' field must be disabled. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_SizeOfFifo A structure of resource requested parameters + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_SetSizeOfFifo(t_Handle h_FmPort, t_FmPortRsrc *p_SizeOfFifo); + +/**************************************************************************//** + @Function FM_PORT_SetAllocBufCounter + + @Description Calling this routine enables/disables BM pool allocate + buffer counters. + By default, counters are enabled. + + May be used for Rx ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] poolId BM pool id. + @Param[in] enable TRUE to enable, FALSE to disable. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_SetAllocBufCounter(t_Handle h_FmPort, uint8_t poolId, bool enable); + +/**************************************************************************//** + @Function FM_PORT_GetCounter + + @Description Reads one of the FM PORT counters. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] fmPortCounter The requested counter. + + @Return Counter's current value. + + @Cautions Allowed only following FM_PORT_Init(). + Note that it is user's responsibility to call this routine only + for enabled counters, and there will be no indication if a + disabled counter is accessed. +*//***************************************************************************/ +uint32_t FM_PORT_GetCounter(t_Handle h_FmPort, e_FmPortCounters fmPortCounter); + +/**************************************************************************//** + @Function FM_PORT_ModifyCounter + + @Description Sets a value to an enabled counter. Use "0" to reset the counter. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] fmPortCounter The requested counter. + @Param[in] value The requested value to be written into the counter. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ModifyCounter(t_Handle h_FmPort, e_FmPortCounters fmPortCounter, uint32_t value); + +/**************************************************************************//** + @Function FM_PORT_GetAllocBufCounter + + @Description Reads one of the FM PORT buffer counters. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] poolId The requested pool. + + @Return Counter's current value. + + @Cautions Allowed only following FM_PORT_Init(). + Note that it is user's responsibility to call this routine only + for enabled counters, and there will be no indication if a + disabled counter is accessed. +*//***************************************************************************/ +uint32_t FM_PORT_GetAllocBufCounter(t_Handle h_FmPort, uint8_t poolId); + +/**************************************************************************//** + @Function FM_PORT_ModifyAllocBufCounter + + @Description Sets a value to an enabled counter. Use "0" to reset the counter. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] poolId The requested pool. + @Param[in] value The requested value to be written into the counter. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ModifyAllocBufCounter(t_Handle h_FmPort, uint8_t poolId, uint32_t value); + +/**************************************************************************//** + @Function FM_PORT_AddCongestionGrps + + @Description This routine effects the corresponding Tx port. + It should be called in order to enable pause + frame transmission in case of congestion in one or more + of the congestion groups relevant to this port. + Each call to this routine may add one or more congestion + groups to be considered relevant to this port. + + May be used for Rx, or RX+OP ports only (depending on chip) + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_CongestionGrps A pointer to an array of congestion groups + id's to consider. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_AddCongestionGrps(t_Handle h_FmPort, t_FmPortCongestionGrps *p_CongestionGrps); + +/**************************************************************************//** + @Function FM_PORT_RemoveCongestionGrps + + @Description This routine effects the corresponding Tx port. It should be + called when congestion groups were + defined for this port and are no longer relevant, or pause + frames transmitting is not required on their behalf. + Each call to this routine may remove one or more congestion + groups to be considered relevant to this port. + + May be used for Rx, or RX+OP ports only (depending on chip) + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_CongestionGrps A pointer to an array of congestion groups + id's to consider. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_RemoveCongestionGrps(t_Handle h_FmPort, t_FmPortCongestionGrps *p_CongestionGrps); + +/**************************************************************************//** + @Function FM_PORT_IsStalled + + @Description A routine for checking whether the specified port is stalled. + + @Param[in] h_FmPort A handle to a FM Port module. + + @Return TRUE if port is stalled, FALSE otherwize + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +bool FM_PORT_IsStalled(t_Handle h_FmPort); + +/**************************************************************************//** + @Function FM_PORT_ReleaseStalled + + @Description This routine may be called in case the port was stalled and may + now be released. + + @Param[in] h_FmPort A handle to a FM Port module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_ReleaseStalled(t_Handle h_FmPort); + +/**************************************************************************//** + @Function FM_PORT_SetRxL4ChecksumVerify + + @Description This routine is relevant for Rx ports (1G and 10G). The routine + set/clear the L3/L4 checksum verification (on RX side). + Note that this takes affect only if hw-parser is enabled! + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] l4Checksum boolean indicates whether to do L3/L4 checksum + on frames or not. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_SetRxL4ChecksumVerify(t_Handle h_FmPort, bool l4Checksum); + +/**************************************************************************//** + @Function FM_PORT_SetErrorsRoute + + @Description Errors selected for this routine will cause a frame with that error + to be enqueued to error queue. + Errors not selected for this routine will cause a frame with that error + to be enqueued to the one of the other port queues. + By default all errors are defined to be enqueued to error queue. + Errors that were configured to be discarded (at initialization) + may not be selected here. + + May be used for Rx and offline parsing ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] errs A list of errors to enqueue to error queue + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_SetErrorsRoute(t_Handle h_FmPort, fmPortFrameErrSelect_t errs); + +/**************************************************************************//** + @Function FM_PORT_SetIMExceptions + + @Description Calling this routine enables/disables FM PORT interrupts. + Note: Not available for guest partition. + + @Param[in] h_FmPort FM PORT module descriptor. + @Param[in] exception The exception to be selected. + @Param[in] enable TRUE to enable interrupt, FALSE to mask it. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_SetIMExceptions(t_Handle h_FmPort, e_FmPortExceptions exception, bool enable); + + + +/**************************************************************************//** + @Group FM_PORT_pcd_runtime_control_grp FM Port PCD Runtime Control Unit + + @Description FM Port PCD Runtime control unit API functions, definitions and enums. + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Description A structure defining the KG scheme after the parser. + This is relevant only to change scheme selection mode - from + direct to indirect and vice versa, or when the scheme is selected directly, + to select the scheme id. + +*//***************************************************************************/ +typedef struct t_FmPcdKgSchemeSelect { + bool direct; /**< TRUE to use 'h_Scheme' directly, FALSE to use LCV.*/ + t_Handle h_DirectScheme; /**< Relevant for 'direct'=TRUE only. + 'h_DirectScheme' selects the scheme after parser. */ +} t_FmPcdKgSchemeSelect; + +/**************************************************************************//** + @Description A structure of scheme parameters +*//***************************************************************************/ +typedef struct t_FmPcdPortSchemesParams { + uint8_t numOfSchemes; /**< Number of schemes for port to be bound to. */ + t_Handle h_Schemes[FM_PCD_KG_NUM_OF_SCHEMES]; /**< Array of 'numOfSchemes' schemes for the + port to be bound to */ +} t_FmPcdPortSchemesParams; + +/**************************************************************************//** + @Description Union for defining port protocol parameters for parser +*//***************************************************************************/ +typedef union u_FmPcdHdrPrsOpts { + /* MPLS */ + struct { + bool labelInterpretationEnable; /**< When this bit is set, the last MPLS label will be + interpreted as described in HW spec table. When the bit + is cleared, the parser will advance to MPLS next parse */ + e_NetHeaderType nextParse; /**< must be equal or higher than IPv4 */ + } mplsPrsOptions; + /* VLAN */ + struct { + uint16_t tagProtocolId1; /**< User defined Tag Protocol Identifier, to be recognized + on VLAN TAG on top of 0x8100 and 0x88A8 */ + uint16_t tagProtocolId2; /**< User defined Tag Protocol Identifier, to be recognized + on VLAN TAG on top of 0x8100 and 0x88A8 */ + } vlanPrsOptions; + /* PPP */ + struct{ + bool enableMTUCheck; /**< Check validity of MTU according to RFC2516 */ + } pppoePrsOptions; + + /* IPV6 */ + struct{ + bool routingHdrDisable; /**< Disable routing header */ + } ipv6PrsOptions; + + /* UDP */ + struct{ + bool padIgnoreChecksum; /**< TRUE to ignore pad in checksum */ + } udpPrsOptions; + + /* TCP */ + struct { + bool padIgnoreChecksum; /**< TRUE to ignore pad in checksum */ + } tcpPrsOptions; +} u_FmPcdHdrPrsOpts; + +/**************************************************************************//** + @Description A structure for defining each header for the parser +*//***************************************************************************/ +typedef struct t_FmPcdPrsAdditionalHdrParams { + e_NetHeaderType hdr; /**< Selected header */ + bool errDisable; /**< TRUE to disable error indication */ + bool swPrsEnable; /**< Enable jump to SW parser when this + header is recognized by the HW parser. */ + uint8_t indexPerHdr; /**< Normally 0, if more than one sw parser + attachments exists for the same header, + (in the main sw parser code) use this + index to distinguish between them. */ + bool usePrsOpts; /**< TRUE to use parser options. */ + u_FmPcdHdrPrsOpts prsOpts; /**< A union according to header type, + defining the parser options selected.*/ +} t_FmPcdPrsAdditionalHdrParams; + +/**************************************************************************//** + @Description struct for defining port PCD parameters +*//***************************************************************************/ +typedef struct t_FmPortPcdPrsParams { + uint8_t prsResultPrivateInfo; /**< The private info provides a method of inserting + port information into the parser result. This information + may be extracted by Keygen and be used for frames + distribution when a per-port distinction is required, + it may also be used as a port logical id for analyzing + incoming frames. */ + uint8_t parsingOffset; /**< Number of bytes from beginning of packet to start parsing */ + e_NetHeaderType firstPrsHdr; /**< The type of the first header expected at 'parsingOffset' */ + bool includeInPrsStatistics; /**< TRUE to include this port in the parser statistics; + NOTE: this field is not valid when the FN is in "guest" mode. */ + uint8_t numOfHdrsWithAdditionalParams; /**< Normally 0, some headers may get + special parameters */ + t_FmPcdPrsAdditionalHdrParams additionalParams[FM_PCD_PRS_NUM_OF_HDRS]; + /**< 'numOfHdrsWithAdditionalParams' structures + of additional parameters + for each header that requires them */ + bool setVlanTpid1; /**< TRUE to configure user selection of Ethertype to + indicate a VLAN tag (in addition to the TPID values + 0x8100 and 0x88A8). */ + uint16_t vlanTpid1; /**< extra tag to use if setVlanTpid1=TRUE. */ + bool setVlanTpid2; /**< TRUE to configure user selection of Ethertype to + indicate a VLAN tag (in addition to the TPID values + 0x8100 and 0x88A8). */ + uint16_t vlanTpid2; /**< extra tag to use if setVlanTpid1=TRUE. */ +} t_FmPortPcdPrsParams; + +/**************************************************************************//** + @Description struct for defining coarse alassification parameters +*//***************************************************************************/ +typedef struct t_FmPortPcdCcParams { + t_Handle h_CcTree; /**< A handle to a CC tree */ +} t_FmPortPcdCcParams; + +/**************************************************************************//** + @Description struct for defining keygen parameters +*//***************************************************************************/ +typedef struct t_FmPortPcdKgParams { + uint8_t numOfSchemes; /**< Number of schemes for port to be bound to. */ + t_Handle h_Schemes[FM_PCD_KG_NUM_OF_SCHEMES]; + /**< Array of 'numOfSchemes' schemes handles for the + port to be bound to */ + bool directScheme; /**< TRUE for going from parser to a specific scheme, + regardless of parser result */ + t_Handle h_DirectScheme; /**< relevant only if direct == TRUE, Scheme handle, + as returned by FM_PCD_KgSetScheme */ +} t_FmPortPcdKgParams; + +/**************************************************************************//** + @Description struct for defining policer parameters +*//***************************************************************************/ +typedef struct t_FmPortPcdPlcrParams { + t_Handle h_Profile; /**< Selected profile handle; Relevant for one of + following cases: + e_FM_PORT_PCD_SUPPORT_PLCR_ONLY or + e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR were selected, + or if any flow uses a KG scheme were policer + profile is not generated + (bypassPlcrProfileGeneration selected) */ +} t_FmPortPcdPlcrParams; + +/**************************************************************************//** + @Description struct for defining port PCD parameters +*//***************************************************************************/ +typedef struct t_FmPortPcdParams { + e_FmPortPcdSupport pcdSupport; /**< Relevant for Rx and offline ports only. + Describes the active PCD engines for this port. */ + t_Handle h_NetEnv; /**< HL Unused in PLCR only mode */ + t_FmPortPcdPrsParams *p_PrsParams; /**< Parser parameters for this port */ + t_FmPortPcdCcParams *p_CcParams; /**< Coarse classification parameters for this port */ + t_FmPortPcdKgParams *p_KgParams; /**< Keygen parameters for this port */ + t_FmPortPcdPlcrParams *p_PlcrParams; /**< Policer parameters for this port */ +} t_FmPortPcdParams; + +/**************************************************************************//** + @Description A structure for defining the Parser starting point +*//***************************************************************************/ +typedef struct t_FmPcdPrsStart { + uint8_t parsingOffset; /**< Number of bytes from beginning of packet to + start parsing */ + e_NetHeaderType firstPrsHdr; /**< The type of the first header axpected at + 'parsingOffset' */ +} t_FmPcdPrsStart; + + +/**************************************************************************//** + @Function FM_PORT_SetPCD + + @Description Calling this routine defines the port's PCD configuration. + It changes it from its default configuration which is PCD + disabled (BMI to BMI) and configures it according to the passed + parameters. + + May be used for Rx and offline parsing ports only + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_FmPortPcd A Structure of parameters defining the port's PCD + configuration. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_SetPCD(t_Handle h_FmPort, t_FmPortPcdParams *p_FmPortPcd); + +/**************************************************************************//** + @Function FM_PORT_DeletePCD + + @Description Calling this routine releases the port's PCD configuration. + The port returns to its default configuration which is PCD + disabled (BMI to BMI) and all PCD configuration is removed. + + May be used for Rx and offline parsing ports which are + in PCD mode only + + @Param[in] h_FmPort A handle to a FM Port module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_DeletePCD(t_Handle h_FmPort); + +/**************************************************************************//** + @Function FM_PORT_AttachPCD + + @Description This routine may be called after FM_PORT_DetachPCD was called, + to return to the originally configured PCD support flow. + The couple of routines are used to allow PCD configuration changes + that demand that PCD will not be used while changes take place. + + May be used for Rx and offline parsing ports which are + in PCD mode only + + @Param[in] h_FmPort A handle to a FM Port module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). +*//***************************************************************************/ +t_Error FM_PORT_AttachPCD(t_Handle h_FmPort); + +/**************************************************************************//** + @Function FM_PORT_DetachPCD + + @Description Calling this routine detaches the port from its PCD functionality. + The port returns to its default flow which is BMI to BMI. + + May be used for Rx and offline parsing ports which are + in PCD mode only + + @Param[in] h_FmPort A handle to a FM Port module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_AttachPCD(). +*//***************************************************************************/ +t_Error FM_PORT_DetachPCD(t_Handle h_FmPort); + +/**************************************************************************//** + @Function FM_PORT_PcdPlcrAllocProfiles + + @Description This routine may be called only for ports that use the Policer in + order to allocate private policer profiles. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] numOfProfiles The number of required policer profiles + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init() and FM_PCD_Init(), and before FM_PORT_SetPCD(). +*//***************************************************************************/ +t_Error FM_PORT_PcdPlcrAllocProfiles(t_Handle h_FmPort, uint16_t numOfProfiles); + +/**************************************************************************//** + @Function FM_PORT_PcdPlcrFreeProfiles + + @Description This routine should be called for freeing private policer profiles. + + @Param[in] h_FmPort A handle to a FM Port module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init() and FM_PCD_Init(), and before FM_PORT_SetPCD(). +*//***************************************************************************/ +t_Error FM_PORT_PcdPlcrFreeProfiles(t_Handle h_FmPort); + +/**************************************************************************//** + @Function FM_PORT_PcdKgModifyInitialScheme + + @Description This routine may be called only for ports that use the keygen in + order to change the initial scheme frame should be routed to. + The change may be of a scheme id (in case of direct mode), + from direct to indirect, or from indirect to direct - specifying the scheme id. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_FmPcdKgScheme A structure of parameters for defining whether + a scheme is direct/indirect, and if direct - scheme id. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD(). +*//***************************************************************************/ +t_Error FM_PORT_PcdKgModifyInitialScheme (t_Handle h_FmPort, t_FmPcdKgSchemeSelect *p_FmPcdKgScheme); + +/**************************************************************************//** + @Function FM_PORT_PcdPlcrModifyInitialProfile + + @Description This routine may be called for ports with flows + e_FM_PORT_PCD_SUPPORT_PLCR_ONLY or e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR + only, to change the initial Policer profile frame should be + routed to. The change may be of a profile and/or absolute/direct + mode selection. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] h_Profile Policer profile handle + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD(). +*//***************************************************************************/ +t_Error FM_PORT_PcdPlcrModifyInitialProfile (t_Handle h_FmPort, t_Handle h_Profile); + +/**************************************************************************//** + @Function FM_PORT_PcdCcModifyTree + + @Description This routine may be called for ports that use coarse classification tree + if the user wishes to replace the tree. The routine may not be called while port + receives packets using the PCD functionalities, therefor port must be first detached + from the PCD, only than the routine may be called, and than port be attached to PCD again. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] h_CcTree A CC tree that was already built. The tree id as returned from + the BuildTree routine. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(), FM_PORT_SetPCD() and FM_PORT_DetachPCD() +*//***************************************************************************/ +t_Error FM_PORT_PcdCcModifyTree (t_Handle h_FmPort, t_Handle h_CcTree); + +/**************************************************************************//** + @Function FM_PORT_PcdKgBindSchemes + + @Description These routines may be called for adding more schemes for the + port to be bound to. The selected schemes are not added, + just this specific port starts using them. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_PortScheme A structure defining the list of schemes to be added. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD(). +*//***************************************************************************/ +t_Error FM_PORT_PcdKgBindSchemes (t_Handle h_FmPort, t_FmPcdPortSchemesParams *p_PortScheme); + +/**************************************************************************//** + @Function FM_PORT_PcdKgUnbindSchemes + + @Description These routines may be called for adding more schemes for the + port to be bound to. The selected schemes are not removed or invalidated, + just this specific port stops using them. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_PortScheme A structure defining the list of schemes to be added. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD(). +*//***************************************************************************/ +t_Error FM_PORT_PcdKgUnbindSchemes (t_Handle h_FmPort, t_FmPcdPortSchemesParams *p_PortScheme); + +/**************************************************************************//** + @Function FM_PORT_PcdPrsModifyStartOffset + + @Description Runtime change of the parser start offset within the header. + The routine may not be called while port + receives packets using the PCD functionalities, therefore port must be first detached + from the PCD, only than the routine may be called, and than port be attached to PCD again. + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_FmPcdPrsStart A structure of parameters for defining the + start point for the parser. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(), FM_PORT_SetPCD() and FM_PORT_DetatchPCD(). +*//***************************************************************************/ +t_Error FM_PORT_PcdPrsModifyStartOffset (t_Handle h_FmPort, t_FmPcdPrsStart *p_FmPcdPrsStart); + +/** @} */ /* end of FM_PORT_pcd_runtime_control_grp group */ +/** @} */ /* end of FM_PORT_runtime_control_grp group */ + + +/**************************************************************************//** + @Group FM_PORT_runtime_data_grp FM Port Runtime Data-path Unit + + @Description FM Port Runtime data unit API functions, definitions and enums. + This API is valid only if working in Independent-Mode. + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Function FM_PORT_ImTx + + @Description Tx function, called to transmit a data buffer on the port. + + @Param[in] h_FmPort A handle to a FM Port module. + @Param[in] p_Data A pointer to an LCP data buffer. + @Param[in] length Size of data for transmission. + @Param[in] lastBuffer Buffer position - TRUE for the last buffer + of a frame, including a single buffer frame + @Param[in] h_BufContext A handle of the user acossiated with this buffer + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). + NOTE - This routine can be used only when working in + Independent-Mode mode. +*//***************************************************************************/ +t_Error FM_PORT_ImTx( t_Handle h_FmPort, + uint8_t *p_Data, + uint16_t length, + bool lastBuffer, + t_Handle h_BufContext); + +/**************************************************************************//** + @Function FM_PORT_ImTxConf + + @Description Tx port confirmation routine, optional, may be called to verify + transmission of all frames. The procedure performed by this + routine will be performed automatically on next buffer transmission, + but if desired, calling this routine will invoke this action on + demand. + + @Param[in] h_FmPort A handle to a FM Port module. + + @Cautions Allowed only following FM_PORT_Init(). + NOTE - This routine can be used only when working in + Independent-Mode mode. +*//***************************************************************************/ +void FM_PORT_ImTxConf(t_Handle h_FmPort); + +/**************************************************************************//** + @Function FM_PORT_ImRx + + @Description Rx function, may be called to poll for received buffers. + Normally, Rx process is invoked by the driver on Rx interrupt. + Alternatively, this routine may be called on demand. + + @Param[in] h_FmPort A handle to a FM Port module. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_PORT_Init(). + NOTE - This routine can be used only when working in + Independent-Mode mode. +*//***************************************************************************/ +t_Error FM_PORT_ImRx(t_Handle h_FmPort); + +/** @} */ /* end of FM_PORT_runtime_data_grp group */ +/** @} */ /* end of FM_PORT_grp group */ +/** @} */ /* end of FM_grp group */ + + + + +#endif /* __FM_PORT_EXT */ |
