diff options
Diffstat (limited to 'sys/contrib/lomac/kernel_pipe.c')
| -rw-r--r-- | sys/contrib/lomac/kernel_pipe.c | 235 |
1 files changed, 235 insertions, 0 deletions
diff --git a/sys/contrib/lomac/kernel_pipe.c b/sys/contrib/lomac/kernel_pipe.c new file mode 100644 index 0000000..c85b0ca --- /dev/null +++ b/sys/contrib/lomac/kernel_pipe.c @@ -0,0 +1,235 @@ +/************************************************************************* + * + * kernel_pipe.c + * + * LOMAC - Low Water-Mark Mandatory Access Control + * Copyright (c) 1999-2001 Networks Associates, Inc. All rights reserved. + * + * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * Neither the name of NAI Labs, Inc. nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + * + * This file contains part of LOMAC's interface to the kernel. This + * part allows LOMAC to monitor (unnamed) pipe read and write + * operations by interposing control on the kernel's pipeops vector. + * + * The pipeops vector is defined in kern/sys_pipe.c. + * + * USAGE: + * + * The LOMAC LKM should call lomac_initialize_pipes() at LKM load time. + * This function turns unnamed pipe interposition on by modifying + * the function addresses in pipeops. + * + * Once the LOMAC LKM turns interposition on, all reads and writes + * will pass through this file's monitoring functions. + * + * This file provides a lomac_uninitialize_pipes() function which + * turns unnamed pipe interposition off by restoring pipeops to + * its original unmodified state. Once the LOMAC LKM turns + * interposition off, subsequent unnamed pipe reads and writes + * will not pass through this file's monitoring functions. + * + * HOW LOMAC HANDLES PIPES: + * + * (This text describes how LOMAC handles (unnamed) pipes in terms of + * abstract architecture-independent concepts.) LOMAC does not treat + * pipes as objects, as it does files. When the kernel creates a new + * pipe, LOMAC assigns it the highest level. Whenever a process + * writes to the pipe, LOMAC reduces the pipe's level to match the + * level of the writing process. Whenever a process reads from a + * pipe, LOMAC reduces the level of the reading process to match the + * pipe's level. As a result, if a high-level process reads the + * output of a low-level process through a pipe, the reading process + * will wind up at the low level. + * + * It takes two `struct pipe's to make a pipe. We set the level + * information in both `struct pipes', and keep them synchronized. + * + * This code presently relies on the one-big-kernel-lock to + * synchronize its access to the `pipe_state' field of each `struct + * pipe'. + * + */ + +#include <sys/types.h> +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/malloc.h> +#include <sys/file.h> +#include <sys/selinfo.h> +#include <sys/pipe.h> +#include <sys/proc.h> +#include <sys/uio.h> + +#include "lomac.h" +#include "kernel_interface.h" +#include "kernel_monitor.h" +#include "kernel_pipe.h" + + +/* `pipeops' is the kernel's pipe operations vector for the file * + * structure. All reads and writes to pipes call through this vector. */ +extern struct fileops pipeops; /* defined in kern/sys_pipe.c */ + + +/* These vars store the original addresses of the pipeops read and * + * write operations, so we can call them, and even restore them * + * later if we want to. */ +static int (*pipe_read_orig)(struct file *, struct uio *, struct ucred *, + int, struct thread *); +static int (*pipe_write_orig)(struct file *, struct uio *, struct ucred *, + int, struct thread *); + + +/* declarations of functions private to this module: */ +static int lomac_pipe_read(struct file *, struct uio *, struct ucred *, + int, struct thread *); +static int lomac_pipe_write(struct file *, struct uio *, struct ucred *, + int, struct thread *); + +/* -------------------- public functions ---------------------------- */ + +/* lomac_initialize_pipes() + * + * in: nothing + * out: nothing + * return: 0 + * + * Turns pipe interposition on by replacing the pipe_read() and pipe_write() + * operations in the kernel's pipeops vector with lomac_pipe_read() and + * lomac_pipe_write(). Saves the addresses of the original operations + * so other functions can call them, and so pipe_interposition_off() + * can restore the pipeops vector to its original unmodified state. + * + */ + +int +lomac_initialize_pipes(void) { + + pipe_read_orig = pipeops.fo_read; + pipeops.fo_read = lomac_pipe_read; + pipe_write_orig = pipeops.fo_write; + pipeops.fo_write = lomac_pipe_write; + return (0); +} /* lomac_initialize_pipes() */ + + +/* lomac_uninitialize_pipes() + * + * in: nothing + * out: nothing + * return: 0 + * + * Turns pipe interposition off by restoring the pipeops vector to its + * original unmodified state. + * + * See note at top of file regarding this function and unloading the + * LOMAC LKM. + * + */ + +int +lomac_uninitialize_pipes(void) { + + KASSERT(pipe_read_orig, ("LOMAC:pipe interpositon off before on")); + KASSERT(pipe_write_orig, ("LOMAC:pipe interpositon off before on")); + pipeops.fo_read = pipe_read_orig; + pipeops.fo_write = pipe_write_orig; + return (0); +} /* lomac_uninitialize_pipes() */ + + + +/* ------------------- private functions --------------------------- */ + +#ifndef MIN +#define MIN(lo, mac) ((lo) < (mac) ? (lo) : (mac)) +#endif + +/* lomac_pipe_read() + * + * Passes the read operation down to pipe_read_orig(). If + * pipe_read_orig() returns success, examines the level of the pipe + * and the reading process. If the reading process has a higher + * level, reduces the level of the process to equal the pipe's level. + * + */ + +static int +lomac_pipe_read(struct file *fp, struct uio *uio, struct ucred *cred, + int flags, struct thread *td) { + lomac_object_t read_pipe; /* attrs are in read end of pipe */ + struct uio kuio; + struct iovec kiov; + void *buf; + int len; + int ret_val; /* holds return values */ + + len = MIN(uio->uio_resid, BIG_PIPE_SIZE); + kiov.iov_base = buf = malloc(len, M_TEMP, M_WAITOK); + kiov.iov_len = len; + kuio.uio_iov = &kiov; + kuio.uio_iovcnt = 1; + kuio.uio_offset = 0; + kuio.uio_resid = len; + kuio.uio_segflg = UIO_SYSSPACE; + kuio.uio_rw = UIO_READ; + kuio.uio_td = td; + ret_val = pipe_read_orig(fp, &kuio, cred, flags, td); + if (ret_val == 0) { + read_pipe.lo_type = LO_TYPE_PIPE; + read_pipe.lo_object.pipe = (struct pipe *)fp->f_data; + (void)monitor_read_object(td->td_proc, &read_pipe); + ret_val = uiomove(buf, len - kuio.uio_resid, uio); + } + free(buf, M_TEMP); + return (ret_val); +} /* lomac_pipe_read() */ + + +/* lomac_pipe_write() + * + * Passes the write operation down to pipe_write_orig(). If + * pipe_write_orig() returns success, examines the level of the pipe + * and the writing process. If the pipe has a higher level than the + * writing process, this function reduces the pipe's level to equal + * the level of the writing process. + * + */ + +static int +lomac_pipe_write(struct file *fp, struct uio *uio, struct ucred *cred, + int flags, struct thread *td) { + lomac_object_t pipe; + int ret_val; /* holds return values */ + + pipe.lo_type = LO_TYPE_PIPE; + pipe.lo_object.pipe = (struct pipe *)fp->f_data; + ret_val = monitor_pipe_write(td->td_proc, &pipe); + if (ret_val == 0) + ret_val = pipe_write_orig(fp, uio, cred, flags, td); + + return (ret_val); +} /* lomac_pipe_write() */ |
