diff options
Diffstat (limited to 'sys/contrib/dev/ath/ath_hal/ar9300/ar9300_eeprom.c')
-rw-r--r-- | sys/contrib/dev/ath/ath_hal/ar9300/ar9300_eeprom.c | 4522 |
1 files changed, 4522 insertions, 0 deletions
diff --git a/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_eeprom.c b/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_eeprom.c new file mode 100644 index 0000000..63a5a43 --- /dev/null +++ b/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_eeprom.c @@ -0,0 +1,4522 @@ +/* + * Copyright (c) 2013 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR + * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. + */ + +#include "opt_ah.h" + +#ifdef AH_SUPPORT_AR9300 + +#include "ah.h" +#include "ah_internal.h" +#include "ah_devid.h" +#ifdef AH_DEBUG +#include "ah_desc.h" /* NB: for HAL_PHYERR* */ +#endif +#include "ar9300/ar9300.h" +#include "ar9300/ar9300eep.h" +#include "ar9300/ar9300template_generic.h" +#include "ar9300/ar9300template_xb112.h" +#include "ar9300/ar9300template_hb116.h" +#include "ar9300/ar9300template_xb113.h" +#include "ar9300/ar9300template_hb112.h" +#include "ar9300/ar9300template_ap121.h" +#include "ar9300/ar9300template_osprey_k31.h" +#include "ar9300/ar9300template_wasp_2.h" +#include "ar9300/ar9300template_wasp_k31.h" +#include "ar9300/ar9300template_aphrodite.h" +#include "ar9300/ar9300reg.h" +#include "ar9300/ar9300phy.h" + + + +#if AH_BYTE_ORDER == AH_BIG_ENDIAN +void ar9300_swap_eeprom(ar9300_eeprom_t *eep); +void ar9300_eeprom_template_swap(void); +#endif + +static u_int16_t ar9300_eeprom_get_spur_chan(struct ath_hal *ah, + u_int16_t spur_chan, HAL_BOOL is_2ghz); +#ifdef UNUSED +static inline HAL_BOOL ar9300_fill_eeprom(struct ath_hal *ah); +static inline HAL_STATUS ar9300_check_eeprom(struct ath_hal *ah); +#endif + +static ar9300_eeprom_t *default9300[] = +{ + &ar9300_template_generic, + &ar9300_template_xb112, + &ar9300_template_hb116, + &ar9300_template_hb112, + &ar9300_template_xb113, + &ar9300_template_ap121, + &ar9300_template_wasp_2, + &ar9300_template_wasp_k31, + &ar9300_template_osprey_k31, + &ar9300_template_aphrodite, +}; + +/* + * Different types of memory where the calibration data might be stored. + * All types are searched in ar9300_eeprom_restore() + * in the order flash, eeprom, otp. + * To disable searching a type, set its parameter to 0. + */ + +/* + * This is where we look for the calibration data. + * must be set before ath_attach() is called + */ +static int calibration_data_try = calibration_data_none; +static int calibration_data_try_address = 0; + +/* + * Set the type of memory used to store calibration data. + * Used by nart to force reading/writing of a specific type. + * The driver can normally allow autodetection + * by setting source to calibration_data_none=0. + */ +void ar9300_calibration_data_set(struct ath_hal *ah, int32_t source) +{ + if (ah != 0) { + AH9300(ah)->calibration_data_source = source; + } else { + calibration_data_try = source; + } +} + +int32_t ar9300_calibration_data_get(struct ath_hal *ah) +{ + if (ah != 0) { + return AH9300(ah)->calibration_data_source; + } else { + return calibration_data_try; + } +} + +/* + * Set the address of first byte used to store calibration data. + * Used by nart to force reading/writing at a specific address. + * The driver can normally allow autodetection by setting size=0. + */ +void ar9300_calibration_data_address_set(struct ath_hal *ah, int32_t size) +{ + if (ah != 0) { + AH9300(ah)->calibration_data_source_address = size; + } else { + calibration_data_try_address = size; + } +} + +int32_t ar9300_calibration_data_address_get(struct ath_hal *ah) +{ + if (ah != 0) { + return AH9300(ah)->calibration_data_source_address; + } else { + return calibration_data_try_address; + } +} + +/* + * This is the template that is loaded if ar9300_eeprom_restore() + * can't find valid data in the memory. + */ +static int Ar9300_eeprom_template_preference = ar9300_eeprom_template_generic; + +void ar9300_eeprom_template_preference(int32_t value) +{ + Ar9300_eeprom_template_preference = value; +} + +/* + * Install the specified default template. + * Overwrites any existing calibration and configuration information in memory. + */ +int32_t ar9300_eeprom_template_install(struct ath_hal *ah, int32_t value) +{ + struct ath_hal_9300 *ahp = AH9300(ah); + ar9300_eeprom_t *mptr, *dptr; + int mdata_size; + + mptr = &ahp->ah_eeprom; + mdata_size = ar9300_eeprom_struct_size(); + if (mptr != 0) { +#if 0 + calibration_data_source = calibration_data_none; + calibration_data_source_address = 0; +#endif + dptr = ar9300_eeprom_struct_default_find_by_id(value); + if (dptr != 0) { + OS_MEMCPY(mptr, dptr, mdata_size); + return 0; + } + } + return -1; +} + +static int +ar9300_eeprom_restore_something(struct ath_hal *ah, ar9300_eeprom_t *mptr, + int mdata_size) +{ + int it; + ar9300_eeprom_t *dptr; + int nptr; + + nptr = -1; + /* + * if we didn't find any blocks in the memory, + * put the prefered template in place + */ + if (nptr < 0) { + AH9300(ah)->calibration_data_source = calibration_data_none; + AH9300(ah)->calibration_data_source_address = 0; + dptr = ar9300_eeprom_struct_default_find_by_id( + Ar9300_eeprom_template_preference); + if (dptr != 0) { + OS_MEMCPY(mptr, dptr, mdata_size); + nptr = 0; + } + } + /* + * if we didn't find the prefered one, + * put the normal default template in place + */ + if (nptr < 0) { + AH9300(ah)->calibration_data_source = calibration_data_none; + AH9300(ah)->calibration_data_source_address = 0; + dptr = ar9300_eeprom_struct_default_find_by_id( + ar9300_eeprom_template_default); + if (dptr != 0) { + OS_MEMCPY(mptr, dptr, mdata_size); + nptr = 0; + } + } + /* + * if we can't find the best template, put any old template in place + * presume that newer ones are better, so search backwards + */ + if (nptr < 0) { + AH9300(ah)->calibration_data_source = calibration_data_none; + AH9300(ah)->calibration_data_source_address = 0; + for (it = ar9300_eeprom_struct_default_many() - 1; it >= 0; it--) { + dptr = ar9300_eeprom_struct_default(it); + if (dptr != 0) { + OS_MEMCPY(mptr, dptr, mdata_size); + nptr = 0; + break; + } + } + } + return nptr; +} + +/* + * Read 16 bits of data from offset into *data + */ +HAL_BOOL +ar9300_eeprom_read_word(struct ath_hal *ah, u_int off, u_int16_t *data) +{ + if (AR_SREV_OSPREY(ah) || AR_SREV_POSEIDON(ah)) + { + (void) OS_REG_READ(ah, AR9300_EEPROM_OFFSET + (off << AR9300_EEPROM_S)); + if (!ath_hal_wait(ah, + AR_HOSTIF_REG(ah, AR_EEPROM_STATUS_DATA), + AR_EEPROM_STATUS_DATA_BUSY | AR_EEPROM_STATUS_DATA_PROT_ACCESS, + 0, AH_WAIT_TIMEOUT)) + { + return AH_FALSE; + } + *data = MS(OS_REG_READ(ah, + AR_HOSTIF_REG(ah, AR_EEPROM_STATUS_DATA)), AR_EEPROM_STATUS_DATA_VAL); + return AH_TRUE; + } + else + { + *data = 0; + return AH_FALSE; + } +} + + +HAL_BOOL +ar9300_otp_read(struct ath_hal *ah, u_int off, u_int32_t *data, HAL_BOOL is_wifi) +{ + int time_out = 1000; + int status = 0; + u_int32_t addr; + + addr = (AR_SREV_WASP(ah) || AR_SREV_SCORPION(ah))? + OTP_MEM_START_ADDRESS_WASP : OTP_MEM_START_ADDRESS; + if (!is_wifi) { + addr = BTOTP_MEM_START_ADDRESS; + } + addr += off * 4; /* OTP is 32 bit addressable */ + (void) OS_REG_READ(ah, addr); + + addr = (AR_SREV_WASP(ah) || AR_SREV_SCORPION(ah)) ? + OTP_STATUS0_OTP_SM_BUSY_WASP : OTP_STATUS0_OTP_SM_BUSY; + if (!is_wifi) { + addr = BTOTP_STATUS0_OTP_SM_BUSY; + } + while ((time_out > 0) && (!status)) { /* wait for access complete */ + /* Read data valid, access not busy, sm not busy */ + status = ((OS_REG_READ(ah, addr) & 0x7) == 0x4) ? 1 : 0; + time_out--; + } + if (time_out == 0) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: Timed out during OTP Status0 validation\n", __func__); + return AH_FALSE; + } + + addr = (AR_SREV_WASP(ah) || AR_SREV_SCORPION(ah)) ? + OTP_STATUS1_EFUSE_READ_DATA_WASP : OTP_STATUS1_EFUSE_READ_DATA; + if (!is_wifi) { + addr = BTOTP_STATUS1_EFUSE_READ_DATA; + } + *data = OS_REG_READ(ah, addr); + return AH_TRUE; +} + + + + +static HAL_STATUS +ar9300_flash_map(struct ath_hal *ah) +{ + struct ath_hal_9300 *ahp = AH9300(ah); +#if defined(AR9100) || defined(__NetBSD__) + ahp->ah_cal_mem = OS_REMAP(ah, AR9300_EEPROM_START_ADDR, AR9300_EEPROM_MAX); +#else + ahp->ah_cal_mem = OS_REMAP((uintptr_t)(AH_PRIVATE(ah)->ah_st), + (AR9300_EEPROM_MAX + AR9300_FLASH_CAL_START_OFFSET)); +#endif + if (!ahp->ah_cal_mem) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: cannot remap eeprom region \n", __func__); + return HAL_EIO; + } + return HAL_OK; +} + +HAL_BOOL +ar9300_flash_read(struct ath_hal *ah, u_int off, u_int16_t *data) +{ + struct ath_hal_9300 *ahp = AH9300(ah); + + *data = ((u_int16_t *)ahp->ah_cal_mem)[off]; + return AH_TRUE; +} + +HAL_BOOL +ar9300_flash_write(struct ath_hal *ah, u_int off, u_int16_t data) +{ + struct ath_hal_9300 *ahp = AH9300(ah); + + ((u_int16_t *)ahp->ah_cal_mem)[off] = data; + return AH_TRUE; +} + +#ifdef UNUSED +#endif + +HAL_STATUS +ar9300_eeprom_attach(struct ath_hal *ah) +{ + struct ath_hal_9300 *ahp = AH9300(ah); + ahp->try_dram = 1; + ahp->try_eeprom = 1; + ahp->try_otp = 1; +#ifdef ATH_CAL_NAND_FLASH + ahp->try_nand = 1; +#else + ahp->try_flash = 1; +#endif + ahp->calibration_data_source = calibration_data_none; + ahp->calibration_data_source_address = 0; + ahp->calibration_data_try = calibration_data_try; + ahp->calibration_data_try_address = 0; + + /* + * In case flash will be used for EEPROM. Otherwise ahp->ah_cal_mem + * must be set to NULL or the real EEPROM address. + */ + ar9300_flash_map(ah); + /* + * ###### This function always return NO SPUR. + * This is not AH_TRUE for many board designs. + * Does anyone use this? + */ + AH_PRIVATE(ah)->ah_eeprom_get_spur_chan = ar9300_eeprom_get_spur_chan; + +#ifdef OLDCODE + /* XXX Needs to be moved for dynamic selection */ + ahp->ah_eeprom = *(default9300[ar9300_eeprom_template_default]); + + + if (AR_SREV_HORNET(ah)) { + /* Set default values for Hornet. */ + ahp->ah_eeprom.base_eep_header.op_cap_flags.op_flags = + AR9300_OPFLAGS_11G; + ahp->ah_eeprom.base_eep_header.txrx_mask = 0x11; + } else if (AR_SREV_POSEIDON(ah)) { + /* Set default values for Poseidon. */ + ahp->ah_eeprom.base_eep_header.op_cap_flags.op_flags = + AR9300_OPFLAGS_11G; + ahp->ah_eeprom.base_eep_header.txrx_mask = 0x11; + } + + if (AH_PRIVATE(ah)->ah_config.ath_hal_skip_eeprom_read) { + ahp->ah_emu_eeprom = 1; + return HAL_OK; + } + + ahp->ah_emu_eeprom = 1; + +#ifdef UNUSED +#endif + + if (!ar9300_fill_eeprom(ah)) { + return HAL_EIO; + } + + return HAL_OK; + /* return ar9300_check_eeprom(ah); */ +#else + ahp->ah_emu_eeprom = 1; + +#if 0 +/*#ifdef MDK_AP*/ /* MDK_AP is defined only in NART AP build */ + u_int8_t buffer[10]; + int caldata_check = 0; + + ar9300_calibration_data_read_flash( + ah, FLASH_BASE_CALDATA_OFFSET, buffer, 4); + printf("flash caldata:: %x\n", buffer[0]); + if (buffer[0] != 0xff) { + caldata_check = 1; + } + if (!caldata_check) { + ar9300_eeprom_t *mptr; + int mdata_size; + if (AR_SREV_HORNET(ah)) { + /* XXX: For initial testing */ + mptr = &ahp->ah_eeprom; + mdata_size = ar9300_eeprom_struct_size(); + ahp->ah_eeprom = ar9300_template_ap121; + ahp->ah_emu_eeprom = 1; + /* need it to let art save in to flash ????? */ + calibration_data_source = calibration_data_flash; + } else if (AR_SREV_WASP(ah)) { + /* XXX: For initial testing */ + ath_hal_printf(ah, " wasp eep attach\n"); + mptr = &ahp->ah_eeprom; + mdata_size = ar9300_eeprom_struct_size(); + ahp->ah_eeprom = ar9300_template_generic; + ahp->ah_eeprom.mac_addr[0] = 0x00; + ahp->ah_eeprom.mac_addr[1] = 0x03; + ahp->ah_eeprom.mac_addr[2] = 0x7F; + ahp->ah_eeprom.mac_addr[3] = 0xBA; + ahp->ah_eeprom.mac_addr[4] = 0xD0; + ahp->ah_eeprom.mac_addr[5] = 0x00; + ahp->ah_emu_eeprom = 1; + ahp->ah_eeprom.base_eep_header.txrx_mask = 0x33; + ahp->ah_eeprom.base_eep_header.txrxgain = 0x10; + /* need it to let art save in to flash ????? */ + calibration_data_source = calibration_data_flash; + } + return HAL_OK; + } +#endif + if (AR_SREV_HORNET(ah) || AR_SREV_WASP(ah) || AR_SREV_SCORPION(ah)) { + ahp->try_eeprom = 0; + } + + if (!ar9300_eeprom_restore(ah)) { + return HAL_EIO; + } + return HAL_OK; +#endif +} + +u_int32_t +ar9300_eeprom_get(struct ath_hal_9300 *ahp, EEPROM_PARAM param) +{ + ar9300_eeprom_t *eep = &ahp->ah_eeprom; + OSPREY_BASE_EEP_HEADER *p_base = &eep->base_eep_header; + OSPREY_BASE_EXTENSION_1 *base_ext1 = &eep->base_ext1; + + switch (param) { +#if NOTYET + case EEP_NFTHRESH_5: + return p_modal[0].noise_floor_thresh_ch[0]; + case EEP_NFTHRESH_2: + return p_modal[1].noise_floor_thresh_ch[0]; +#endif + case EEP_MAC_LSW: + return eep->mac_addr[0] << 8 | eep->mac_addr[1]; + case EEP_MAC_MID: + return eep->mac_addr[2] << 8 | eep->mac_addr[3]; + case EEP_MAC_MSW: + return eep->mac_addr[4] << 8 | eep->mac_addr[5]; + case EEP_REG_0: + return p_base->reg_dmn[0]; + case EEP_REG_1: + return p_base->reg_dmn[1]; + case EEP_OP_CAP: + return p_base->device_cap; + case EEP_OP_MODE: + return p_base->op_cap_flags.op_flags; + case EEP_RF_SILENT: + return p_base->rf_silent; +#if NOTYET + case EEP_OB_5: + return p_modal[0].ob; + case EEP_DB_5: + return p_modal[0].db; + case EEP_OB_2: + return p_modal[1].ob; + case EEP_DB_2: + return p_modal[1].db; + case EEP_MINOR_REV: + return p_base->eeprom_version & AR9300_EEP_VER_MINOR_MASK; +#endif + case EEP_TX_MASK: + return (p_base->txrx_mask >> 4) & 0xf; + case EEP_RX_MASK: + return p_base->txrx_mask & 0xf; +#if NOTYET + case EEP_FSTCLK_5G: + return p_base->fast_clk5g; + case EEP_RXGAIN_TYPE: + return p_base->rx_gain_type; +#endif + case EEP_DRIVE_STRENGTH: +#define AR9300_EEP_BASE_DRIVE_STRENGTH 0x1 + return p_base->misc_configuration & AR9300_EEP_BASE_DRIVE_STRENGTH; + case EEP_INTERNAL_REGULATOR: + /* Bit 4 is internal regulator flag */ + return ((p_base->feature_enable & 0x10) >> 4); + case EEP_SWREG: + return (p_base->swreg); + case EEP_PAPRD_ENABLED: + /* Bit 5 is paprd flag */ + return ((p_base->feature_enable & 0x20) >> 5); + case EEP_ANTDIV_control: + return (u_int32_t)(base_ext1->ant_div_control); + case EEP_CHAIN_MASK_REDUCE: + return ((p_base->misc_configuration >> 3) & 0x1); + case EEP_OL_PWRCTRL: + return 0; + case EEP_DEV_TYPE: + return p_base->device_type; + default: + HALASSERT(0); + return 0; + } +} + + + +/******************************************************************************/ +/*! +** \brief EEPROM fixup code for INI values +** +** This routine provides a place to insert "fixup" code for specific devices +** that need to modify INI values based on EEPROM values, BEFORE the INI values +** are written. +** Certain registers in the INI file can only be written once without +** undesired side effects, and this provides a place for EEPROM overrides +** in these cases. +** +** This is called at attach time once. It should not affect run time +** performance at all +** +** \param ah Pointer to HAL object (this) +** \param p_eep_data Pointer to (filled in) eeprom data structure +** \param reg register being inspected on this call +** \param value value in INI file +** +** \return Updated value for INI file. +*/ +u_int32_t +ar9300_ini_fixup(struct ath_hal *ah, ar9300_eeprom_t *p_eep_data, + u_int32_t reg, u_int32_t value) +{ + HALDEBUG(AH_NULL, HAL_DEBUG_UNMASKABLE, + "ar9300_eeprom_def_ini_fixup: FIXME\n"); +#if 0 + BASE_EEPDEF_HEADER *p_base = &(p_eep_data->base_eep_header); + + switch (AH_PRIVATE(ah)->ah_devid) + { + case AR9300_DEVID_AR9300_PCI: + /* + ** Need to set the external/internal regulator bit to the proper value. + ** Can only write this ONCE. + */ + + if ( reg == 0x7894 ) + { + /* + ** Check for an EEPROM data structure of "0x0b" or better + */ + + HALDEBUG(ah, HAL_DEBUG_EEPROM, "ini VAL: %x EEPROM: %x\n", + value, (p_base->version & 0xff)); + + if ( (p_base->version & 0xff) > 0x0a) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "PWDCLKIND: %d\n", p_base->pwdclkind); + value &= ~AR_AN_TOP2_PWDCLKIND; + value |= + AR_AN_TOP2_PWDCLKIND & + (p_base->pwdclkind << AR_AN_TOP2_PWDCLKIND_S); + } else { + HALDEBUG(ah, HAL_DEBUG_EEPROM, "PWDCLKIND Earlier Rev\n"); + } + + HALDEBUG(ah, HAL_DEBUG_EEPROM, "final ini VAL: %x\n", value); + } + break; + + } + + return (value); +#else + return 0; +#endif +} + +/* + * Returns the interpolated y value corresponding to the specified x value + * from the np ordered pairs of data (px,py). + * The pairs do not have to be in any order. + * If the specified x value is less than any of the px, + * the returned y value is equal to the py for the lowest px. + * If the specified x value is greater than any of the px, + * the returned y value is equal to the py for the highest px. + */ +static int +interpolate(int32_t x, int32_t *px, int32_t *py, u_int16_t np) +{ + int ip = 0; + int lx = 0, ly = 0, lhave = 0; + int hx = 0, hy = 0, hhave = 0; + int dx = 0; + int y = 0; + int bf, factor, plus; + + lhave = 0; + hhave = 0; + /* + * identify best lower and higher x calibration measurement + */ + for (ip = 0; ip < np; ip++) { + dx = x - px[ip]; + /* this measurement is higher than our desired x */ + if (dx <= 0) { + if (!hhave || dx > (x - hx)) { + /* new best higher x measurement */ + hx = px[ip]; + hy = py[ip]; + hhave = 1; + } + } + /* this measurement is lower than our desired x */ + if (dx >= 0) { + if (!lhave || dx < (x - lx)) { + /* new best lower x measurement */ + lx = px[ip]; + ly = py[ip]; + lhave = 1; + } + } + } + /* the low x is good */ + if (lhave) { + /* so is the high x */ + if (hhave) { + /* they're the same, so just pick one */ + if (hx == lx) { + y = ly; + } else { + /* interpolate with round off */ + bf = (2 * (hy - ly) * (x - lx)) / (hx - lx); + plus = (bf % 2); + factor = bf / 2; + y = ly + factor + plus; + } + } else { + /* only low is good, use it */ + y = ly; + } + } else if (hhave) { + /* only high is good, use it */ + y = hy; + } else { + /* nothing is good,this should never happen unless np=0, ???? */ + y = -(1 << 30); + } + + return y; +} + +u_int8_t +ar9300_eeprom_get_legacy_trgt_pwr(struct ath_hal *ah, u_int16_t rate_index, + u_int16_t freq, HAL_BOOL is_2ghz) +{ + u_int16_t num_piers, i; + int32_t target_power_array[OSPREY_NUM_5G_20_TARGET_POWERS]; + int32_t freq_array[OSPREY_NUM_5G_20_TARGET_POWERS]; + u_int8_t *p_freq_bin; + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + CAL_TARGET_POWER_LEG *p_eeprom_target_pwr; + + if (is_2ghz) { + num_piers = OSPREY_NUM_2G_20_TARGET_POWERS; + p_eeprom_target_pwr = eep->cal_target_power_2g; + p_freq_bin = eep->cal_target_freqbin_2g; + } else { + num_piers = OSPREY_NUM_5G_20_TARGET_POWERS; + p_eeprom_target_pwr = eep->cal_target_power_5g; + p_freq_bin = eep->cal_target_freqbin_5g; + } + + /* + * create array of channels and targetpower from + * targetpower piers stored on eeprom + */ + for (i = 0; i < num_piers; i++) { + freq_array[i] = FBIN2FREQ(p_freq_bin[i], is_2ghz); + target_power_array[i] = p_eeprom_target_pwr[i].t_pow2x[rate_index]; + } + + /* interpolate to get target power for given frequency */ + return + ((u_int8_t)interpolate( + (int32_t)freq, freq_array, target_power_array, num_piers)); +} + +u_int8_t +ar9300_eeprom_get_ht20_trgt_pwr(struct ath_hal *ah, u_int16_t rate_index, + u_int16_t freq, HAL_BOOL is_2ghz) +{ + u_int16_t num_piers, i; + int32_t target_power_array[OSPREY_NUM_5G_20_TARGET_POWERS]; + int32_t freq_array[OSPREY_NUM_5G_20_TARGET_POWERS]; + u_int8_t *p_freq_bin; + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + OSP_CAL_TARGET_POWER_HT *p_eeprom_target_pwr; + + if (is_2ghz) { + num_piers = OSPREY_NUM_2G_20_TARGET_POWERS; + p_eeprom_target_pwr = eep->cal_target_power_2g_ht20; + p_freq_bin = eep->cal_target_freqbin_2g_ht20; + } else { + num_piers = OSPREY_NUM_5G_20_TARGET_POWERS; + p_eeprom_target_pwr = eep->cal_target_power_5g_ht20; + p_freq_bin = eep->cal_target_freqbin_5g_ht20; + } + + /* + * create array of channels and targetpower from + * targetpower piers stored on eeprom + */ + for (i = 0; i < num_piers; i++) { + freq_array[i] = FBIN2FREQ(p_freq_bin[i], is_2ghz); + target_power_array[i] = p_eeprom_target_pwr[i].t_pow2x[rate_index]; + } + + /* interpolate to get target power for given frequency */ + return + ((u_int8_t)interpolate( + (int32_t)freq, freq_array, target_power_array, num_piers)); +} + +u_int8_t +ar9300_eeprom_get_ht40_trgt_pwr(struct ath_hal *ah, u_int16_t rate_index, + u_int16_t freq, HAL_BOOL is_2ghz) +{ + u_int16_t num_piers, i; + int32_t target_power_array[OSPREY_NUM_5G_40_TARGET_POWERS]; + int32_t freq_array[OSPREY_NUM_5G_40_TARGET_POWERS]; + u_int8_t *p_freq_bin; + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + OSP_CAL_TARGET_POWER_HT *p_eeprom_target_pwr; + + if (is_2ghz) { + num_piers = OSPREY_NUM_2G_40_TARGET_POWERS; + p_eeprom_target_pwr = eep->cal_target_power_2g_ht40; + p_freq_bin = eep->cal_target_freqbin_2g_ht40; + } else { + num_piers = OSPREY_NUM_5G_40_TARGET_POWERS; + p_eeprom_target_pwr = eep->cal_target_power_5g_ht40; + p_freq_bin = eep->cal_target_freqbin_5g_ht40; + } + + /* + * create array of channels and targetpower from + * targetpower piers stored on eeprom + */ + for (i = 0; i < num_piers; i++) { + freq_array[i] = FBIN2FREQ(p_freq_bin[i], is_2ghz); + target_power_array[i] = p_eeprom_target_pwr[i].t_pow2x[rate_index]; + } + + /* interpolate to get target power for given frequency */ + return + ((u_int8_t)interpolate( + (int32_t)freq, freq_array, target_power_array, num_piers)); +} + +u_int8_t +ar9300_eeprom_get_cck_trgt_pwr(struct ath_hal *ah, u_int16_t rate_index, + u_int16_t freq) +{ + u_int16_t num_piers = OSPREY_NUM_2G_CCK_TARGET_POWERS, i; + int32_t target_power_array[OSPREY_NUM_2G_CCK_TARGET_POWERS]; + int32_t freq_array[OSPREY_NUM_2G_CCK_TARGET_POWERS]; + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + u_int8_t *p_freq_bin = eep->cal_target_freqbin_cck; + CAL_TARGET_POWER_LEG *p_eeprom_target_pwr = eep->cal_target_power_cck; + + /* + * create array of channels and targetpower from + * targetpower piers stored on eeprom + */ + for (i = 0; i < num_piers; i++) { + freq_array[i] = FBIN2FREQ(p_freq_bin[i], 1); + target_power_array[i] = p_eeprom_target_pwr[i].t_pow2x[rate_index]; + } + + /* interpolate to get target power for given frequency */ + return + ((u_int8_t)interpolate( + (int32_t)freq, freq_array, target_power_array, num_piers)); +} + +/* + * Set tx power registers to array of values passed in + */ +int +ar9300_transmit_power_reg_write(struct ath_hal *ah, u_int8_t *p_pwr_array) +{ +#define POW_SM(_r, _s) (((_r) & 0x3f) << (_s)) + /* make sure forced gain is not set */ +#if 0 + field_write("force_dac_gain", 0); + OS_REG_WRITE(ah, 0xa3f8, 0); + field_write("force_tx_gain", 0); +#endif + + OS_REG_WRITE(ah, 0xa458, 0); + + /* Write the OFDM power per rate set */ + /* 6 (LSB), 9, 12, 18 (MSB) */ + OS_REG_WRITE(ah, 0xa3c0, + POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 24) + | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 16) + | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 8) + | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 0) + ); + /* 24 (LSB), 36, 48, 54 (MSB) */ + OS_REG_WRITE(ah, 0xa3c4, + POW_SM(p_pwr_array[ALL_TARGET_LEGACY_54], 24) + | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_48], 16) + | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_36], 8) + | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 0) + ); + + /* Write the CCK power per rate set */ + /* 1L (LSB), reserved, 2L, 2S (MSB) */ + OS_REG_WRITE(ah, 0xa3c8, + POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 24) + | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 16) +/* | POW_SM(tx_power_times2, 8)*/ /* this is reserved for Osprey */ + | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 0) + ); + /* 5.5L (LSB), 5.5S, 11L, 11S (MSB) */ + OS_REG_WRITE(ah, 0xa3cc, + POW_SM(p_pwr_array[ALL_TARGET_LEGACY_11S], 24) + | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_11L], 16) + | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_5S], 8) + | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 0) + ); + + /* write the power for duplicated frames - HT40 */ + /* dup40_cck (LSB), dup40_ofdm, ext20_cck, ext20_ofdm (MSB) */ + OS_REG_WRITE(ah, 0xa3e0, + POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 24) + | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 16) + | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], 8) + | POW_SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], 0) + ); + + /* Write the HT20 power per rate set */ + /* 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB) */ + OS_REG_WRITE(ah, 0xa3d0, + POW_SM(p_pwr_array[ALL_TARGET_HT20_5], 24) + | POW_SM(p_pwr_array[ALL_TARGET_HT20_4], 16) + | POW_SM(p_pwr_array[ALL_TARGET_HT20_1_3_9_11_17_19], 8) + | POW_SM(p_pwr_array[ALL_TARGET_HT20_0_8_16], 0) + ); + + /* 6 (LSB), 7, 12, 13 (MSB) */ + OS_REG_WRITE(ah, 0xa3d4, + POW_SM(p_pwr_array[ALL_TARGET_HT20_13], 24) + | POW_SM(p_pwr_array[ALL_TARGET_HT20_12], 16) + | POW_SM(p_pwr_array[ALL_TARGET_HT20_7], 8) + | POW_SM(p_pwr_array[ALL_TARGET_HT20_6], 0) + ); + + /* 14 (LSB), 15, 20, 21 */ + OS_REG_WRITE(ah, 0xa3e4, + POW_SM(p_pwr_array[ALL_TARGET_HT20_21], 24) + | POW_SM(p_pwr_array[ALL_TARGET_HT20_20], 16) + | POW_SM(p_pwr_array[ALL_TARGET_HT20_15], 8) + | POW_SM(p_pwr_array[ALL_TARGET_HT20_14], 0) + ); + + /* Mixed HT20 and HT40 rates */ + /* HT20 22 (LSB), HT20 23, HT40 22, HT40 23 (MSB) */ + OS_REG_WRITE(ah, 0xa3e8, + POW_SM(p_pwr_array[ALL_TARGET_HT40_23], 24) + | POW_SM(p_pwr_array[ALL_TARGET_HT40_22], 16) + | POW_SM(p_pwr_array[ALL_TARGET_HT20_23], 8) + | POW_SM(p_pwr_array[ALL_TARGET_HT20_22], 0) + ); + + /* Write the HT40 power per rate set */ + /* correct PAR difference between HT40 and HT20/LEGACY */ + /* 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB) */ + OS_REG_WRITE(ah, 0xa3d8, + POW_SM(p_pwr_array[ALL_TARGET_HT40_5], 24) + | POW_SM(p_pwr_array[ALL_TARGET_HT40_4], 16) + | POW_SM(p_pwr_array[ALL_TARGET_HT40_1_3_9_11_17_19], 8) + | POW_SM(p_pwr_array[ALL_TARGET_HT40_0_8_16], 0) + ); + + /* 6 (LSB), 7, 12, 13 (MSB) */ + OS_REG_WRITE(ah, 0xa3dc, + POW_SM(p_pwr_array[ALL_TARGET_HT40_13], 24) + | POW_SM(p_pwr_array[ALL_TARGET_HT40_12], 16) + | POW_SM(p_pwr_array[ALL_TARGET_HT40_7], 8) + | POW_SM(p_pwr_array[ALL_TARGET_HT40_6], 0) + ); + + /* 14 (LSB), 15, 20, 21 */ + OS_REG_WRITE(ah, 0xa3ec, + POW_SM(p_pwr_array[ALL_TARGET_HT40_21], 24) + | POW_SM(p_pwr_array[ALL_TARGET_HT40_20], 16) + | POW_SM(p_pwr_array[ALL_TARGET_HT40_15], 8) + | POW_SM(p_pwr_array[ALL_TARGET_HT40_14], 0) + ); + + return 0; +#undef POW_SM +} + +static void +ar9300_selfgen_tpc_reg_write(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan, + u_int8_t *p_pwr_array) +{ + u_int32_t tpc_reg_val; + + /* Set the target power values for self generated frames (ACK,RTS/CTS) to + * be within limits. This is just a safety measure.With per packet TPC mode + * enabled the target power value used with self generated frames will be + * MIN( TPC reg, BB_powertx_rate register) + */ + + if (IS_CHAN_2GHZ(chan)) { + tpc_reg_val = (SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], AR_TPC_ACK) | + SM(p_pwr_array[ALL_TARGET_LEGACY_1L_5L], AR_TPC_CTS) | + SM(0x3f, AR_TPC_CHIRP) | + SM(0x3f, AR_TPC_RPT)); + } else { + tpc_reg_val = (SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], AR_TPC_ACK) | + SM(p_pwr_array[ALL_TARGET_LEGACY_6_24], AR_TPC_CTS) | + SM(0x3f, AR_TPC_CHIRP) | + SM(0x3f, AR_TPC_RPT)); + } + OS_REG_WRITE(ah, AR_TPC, tpc_reg_val); +} + +void +ar9300_set_target_power_from_eeprom(struct ath_hal *ah, u_int16_t freq, + u_int8_t *target_power_val_t2) +{ + /* hard code for now, need to get from eeprom struct */ + u_int8_t ht40_power_inc_for_pdadc = 0; + HAL_BOOL is_2ghz = 0; + + if (freq < 4000) { + is_2ghz = 1; + } + + target_power_val_t2[ALL_TARGET_LEGACY_6_24] = + ar9300_eeprom_get_legacy_trgt_pwr( + ah, LEGACY_TARGET_RATE_6_24, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_LEGACY_36] = + ar9300_eeprom_get_legacy_trgt_pwr( + ah, LEGACY_TARGET_RATE_36, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_LEGACY_48] = + ar9300_eeprom_get_legacy_trgt_pwr( + ah, LEGACY_TARGET_RATE_48, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_LEGACY_54] = + ar9300_eeprom_get_legacy_trgt_pwr( + ah, LEGACY_TARGET_RATE_54, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_LEGACY_1L_5L] = + ar9300_eeprom_get_cck_trgt_pwr( + ah, LEGACY_TARGET_RATE_1L_5L, freq); + target_power_val_t2[ALL_TARGET_LEGACY_5S] = + ar9300_eeprom_get_cck_trgt_pwr( + ah, LEGACY_TARGET_RATE_5S, freq); + target_power_val_t2[ALL_TARGET_LEGACY_11L] = + ar9300_eeprom_get_cck_trgt_pwr( + ah, LEGACY_TARGET_RATE_11L, freq); + target_power_val_t2[ALL_TARGET_LEGACY_11S] = + ar9300_eeprom_get_cck_trgt_pwr( + ah, LEGACY_TARGET_RATE_11S, freq); + target_power_val_t2[ALL_TARGET_HT20_0_8_16] = + ar9300_eeprom_get_ht20_trgt_pwr( + ah, HT_TARGET_RATE_0_8_16, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_HT20_1_3_9_11_17_19] = + ar9300_eeprom_get_ht20_trgt_pwr( + ah, HT_TARGET_RATE_1_3_9_11_17_19, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_HT20_4] = + ar9300_eeprom_get_ht20_trgt_pwr( + ah, HT_TARGET_RATE_4, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_HT20_5] = + ar9300_eeprom_get_ht20_trgt_pwr( + ah, HT_TARGET_RATE_5, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_HT20_6] = + ar9300_eeprom_get_ht20_trgt_pwr( + ah, HT_TARGET_RATE_6, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_HT20_7] = + ar9300_eeprom_get_ht20_trgt_pwr( + ah, HT_TARGET_RATE_7, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_HT20_12] = + ar9300_eeprom_get_ht20_trgt_pwr( + ah, HT_TARGET_RATE_12, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_HT20_13] = + ar9300_eeprom_get_ht20_trgt_pwr( + ah, HT_TARGET_RATE_13, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_HT20_14] = + ar9300_eeprom_get_ht20_trgt_pwr( + ah, HT_TARGET_RATE_14, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_HT20_15] = + ar9300_eeprom_get_ht20_trgt_pwr( + ah, HT_TARGET_RATE_15, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_HT20_20] = + ar9300_eeprom_get_ht20_trgt_pwr( + ah, HT_TARGET_RATE_20, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_HT20_21] = + ar9300_eeprom_get_ht20_trgt_pwr( + ah, HT_TARGET_RATE_21, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_HT20_22] = + ar9300_eeprom_get_ht20_trgt_pwr( + ah, HT_TARGET_RATE_22, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_HT20_23] = + ar9300_eeprom_get_ht20_trgt_pwr( + ah, HT_TARGET_RATE_23, freq, is_2ghz); + target_power_val_t2[ALL_TARGET_HT40_0_8_16] = + ar9300_eeprom_get_ht40_trgt_pwr( + ah, HT_TARGET_RATE_0_8_16, freq, is_2ghz) + + ht40_power_inc_for_pdadc; + target_power_val_t2[ALL_TARGET_HT40_1_3_9_11_17_19] = + ar9300_eeprom_get_ht40_trgt_pwr( + ah, HT_TARGET_RATE_1_3_9_11_17_19, freq, is_2ghz) + + ht40_power_inc_for_pdadc; + target_power_val_t2[ALL_TARGET_HT40_4] = + ar9300_eeprom_get_ht40_trgt_pwr( + ah, HT_TARGET_RATE_4, freq, is_2ghz) + ht40_power_inc_for_pdadc; + target_power_val_t2[ALL_TARGET_HT40_5] = + ar9300_eeprom_get_ht40_trgt_pwr( + ah, HT_TARGET_RATE_5, freq, is_2ghz) + ht40_power_inc_for_pdadc; + target_power_val_t2[ALL_TARGET_HT40_6] = + ar9300_eeprom_get_ht40_trgt_pwr( + ah, HT_TARGET_RATE_6, freq, is_2ghz) + ht40_power_inc_for_pdadc; + target_power_val_t2[ALL_TARGET_HT40_7] = + ar9300_eeprom_get_ht40_trgt_pwr( + ah, HT_TARGET_RATE_7, freq, is_2ghz) + ht40_power_inc_for_pdadc; + target_power_val_t2[ALL_TARGET_HT40_12] = + ar9300_eeprom_get_ht40_trgt_pwr( + ah, HT_TARGET_RATE_12, freq, is_2ghz) + ht40_power_inc_for_pdadc; + target_power_val_t2[ALL_TARGET_HT40_13] = + ar9300_eeprom_get_ht40_trgt_pwr( + ah, HT_TARGET_RATE_13, freq, is_2ghz) + ht40_power_inc_for_pdadc; + target_power_val_t2[ALL_TARGET_HT40_14] = + ar9300_eeprom_get_ht40_trgt_pwr( + ah, HT_TARGET_RATE_14, freq, is_2ghz) + ht40_power_inc_for_pdadc; + target_power_val_t2[ALL_TARGET_HT40_15] = + ar9300_eeprom_get_ht40_trgt_pwr( + ah, HT_TARGET_RATE_15, freq, is_2ghz) + ht40_power_inc_for_pdadc; + target_power_val_t2[ALL_TARGET_HT40_20] = + ar9300_eeprom_get_ht40_trgt_pwr( + ah, HT_TARGET_RATE_20, freq, is_2ghz) + ht40_power_inc_for_pdadc; + target_power_val_t2[ALL_TARGET_HT40_21] = + ar9300_eeprom_get_ht40_trgt_pwr( + ah, HT_TARGET_RATE_21, freq, is_2ghz) + ht40_power_inc_for_pdadc; + target_power_val_t2[ALL_TARGET_HT40_22] = + ar9300_eeprom_get_ht40_trgt_pwr( + ah, HT_TARGET_RATE_22, freq, is_2ghz) + ht40_power_inc_for_pdadc; + target_power_val_t2[ALL_TARGET_HT40_23] = + ar9300_eeprom_get_ht40_trgt_pwr( + ah, HT_TARGET_RATE_23, freq, is_2ghz) + ht40_power_inc_for_pdadc; + +#ifdef AH_DEBUG + { + int i = 0; + + HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: APPLYING TARGET POWERS\n", __func__); + while (i < ar9300_rate_size) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: TPC[%02d] 0x%08x ", + __func__, i, target_power_val_t2[i]); + i++; + if (i == ar9300_rate_size) { + break; + } + HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: TPC[%02d] 0x%08x ", + __func__, i, target_power_val_t2[i]); + i++; + if (i == ar9300_rate_size) { + break; + } + HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: TPC[%02d] 0x%08x ", + __func__, i, target_power_val_t2[i]); + i++; + if (i == ar9300_rate_size) { + break; + } + HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: TPC[%02d] 0x%08x \n", + __func__, i, target_power_val_t2[i]); + i++; + } + } +#endif +} + +u_int16_t *ar9300_regulatory_domain_get(struct ath_hal *ah) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + return eep->base_eep_header.reg_dmn; +} + + +int32_t +ar9300_eeprom_write_enable_gpio_get(struct ath_hal *ah) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + return eep->base_eep_header.eeprom_write_enable_gpio; +} + +int32_t +ar9300_wlan_disable_gpio_get(struct ath_hal *ah) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + return eep->base_eep_header.wlan_disable_gpio; +} + +int32_t +ar9300_wlan_led_gpio_get(struct ath_hal *ah) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + return eep->base_eep_header.wlan_led_gpio; +} + +int32_t +ar9300_rx_band_select_gpio_get(struct ath_hal *ah) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + return eep->base_eep_header.rx_band_select_gpio; +} + +/* + * since valid noise floor values are negative, returns 1 on error + */ +int32_t +ar9300_noise_floor_cal_or_power_get(struct ath_hal *ah, int32_t frequency, + int32_t ichain, HAL_BOOL use_cal) +{ + int nf_use = 1; /* start with an error return value */ + int32_t fx[OSPREY_NUM_5G_CAL_PIERS + OSPREY_NUM_2G_CAL_PIERS]; + int32_t nf[OSPREY_NUM_5G_CAL_PIERS + OSPREY_NUM_2G_CAL_PIERS]; + int nnf; + int is_2ghz; + int ipier, npier; + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + u_int8_t *p_cal_pier; + OSP_CAL_DATA_PER_FREQ_OP_LOOP *p_cal_pier_struct; + + /* + * check chain value + */ + if (ichain < 0 || ichain >= OSPREY_MAX_CHAINS) { + return 1; + } + + /* figure out which band we're using */ + is_2ghz = (frequency < 4000); + if (is_2ghz) { + npier = OSPREY_NUM_2G_CAL_PIERS; + p_cal_pier = eep->cal_freq_pier_2g; + p_cal_pier_struct = eep->cal_pier_data_2g[ichain]; + } else { + npier = OSPREY_NUM_5G_CAL_PIERS; + p_cal_pier = eep->cal_freq_pier_5g; + p_cal_pier_struct = eep->cal_pier_data_5g[ichain]; + } + /* look for valid noise floor values */ + nnf = 0; + for (ipier = 0; ipier < npier; ipier++) { + fx[nnf] = FBIN2FREQ(p_cal_pier[ipier], is_2ghz); + nf[nnf] = use_cal ? + p_cal_pier_struct[ipier].rx_noisefloor_cal : + p_cal_pier_struct[ipier].rx_noisefloor_power; + if (nf[nnf] < 0) { + nnf++; + } + } + /* + * If we have some valid values, interpolate to find the value + * at the desired frequency. + */ + if (nnf > 0) { + nf_use = interpolate(frequency, fx, nf, nnf); + } + + return nf_use; +} + +int32_t ar9300_rx_gain_index_get(struct ath_hal *ah) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + + return (eep->base_eep_header.txrxgain) & 0xf; /* bits 3:0 */ +} + + +int32_t ar9300_tx_gain_index_get(struct ath_hal *ah) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + + return (eep->base_eep_header.txrxgain >> 4) & 0xf; /* bits 7:4 */ +} + +HAL_BOOL ar9300_internal_regulator_apply(struct ath_hal *ah) +{ + struct ath_hal_9300 *ahp = AH9300(ah); + int internal_regulator = ar9300_eeprom_get(ahp, EEP_INTERNAL_REGULATOR); + int reg_pmu1, reg_pmu2, reg_pmu1_set, reg_pmu2_set; + u_int32_t reg_PMU1, reg_PMU2; + unsigned long eep_addr; + u_int32_t reg_val, reg_usb = 0, reg_pmu = 0; + int usb_valid = 0, pmu_valid = 0; + unsigned char pmu_refv; + + if (AR_SREV_JUPITER(ah) || AR_SREV_APHRODITE(ah)) { + reg_PMU1 = AR_PHY_PMU1_JUPITER; + reg_PMU2 = AR_PHY_PMU2_JUPITER; + } + else { + reg_PMU1 = AR_PHY_PMU1; + reg_PMU2 = AR_PHY_PMU2; + } + + if (internal_regulator) { + if (AR_SREV_HORNET(ah) || AR_SREV_POSEIDON(ah)) { + if (AR_SREV_HORNET(ah)) { + /* Read OTP first */ + for (eep_addr = 0x14; ; eep_addr -= 0x10) { + + ar9300_otp_read(ah, eep_addr / 4, ®_val, 1); + + if ((reg_val & 0x80) == 0x80){ + usb_valid = 1; + reg_usb = reg_val & 0x000000ff; + } + + if ((reg_val & 0x80000000) == 0x80000000){ + pmu_valid = 1; + reg_pmu = (reg_val & 0xff000000) >> 24; + } + + if (eep_addr == 0x4) { + break; + } + } + + if (pmu_valid) { + pmu_refv = reg_pmu & 0xf; + } else { + pmu_refv = 0x8; + } + + /* + * If (valid) { + * Usb_phy_ctrl2_tx_cal_en -> 0 + * Usb_phy_ctrl2_tx_cal_sel -> 0 + * Usb_phy_ctrl2_tx_man_cal -> 0, 1, 3, 7 or 15 from OTP + * } + */ + if (usb_valid) { + OS_REG_RMW_FIELD(ah, 0x16c88, AR_PHY_CTRL2_TX_CAL_EN, 0x0); + OS_REG_RMW_FIELD(ah, 0x16c88, AR_PHY_CTRL2_TX_CAL_SEL, 0x0); + OS_REG_RMW_FIELD(ah, 0x16c88, + AR_PHY_CTRL2_TX_MAN_CAL, (reg_usb & 0xf)); + } + + } else { + pmu_refv = 0x8; + } + /*#ifndef USE_HIF*/ + /* Follow the MDK settings for Hornet PMU. + * my $pwd = 0x0; + * my $Nfdiv = 0x3; # xtal_freq = 25MHz + * my $Nfdiv = 0x4; # xtal_freq = 40MHz + * my $Refv = 0x7; # 0x5:1.22V; 0x8:1.29V + * my $Gm1 = 0x3; #Poseidon $Gm1=1 + * my $classb = 0x0; + * my $Cc = 0x1; #Poseidon $Cc=7 + * my $Rc = 0x6; + * my $ramp_slope = 0x1; + * my $Segm = 0x3; + * my $use_local_osc = 0x0; + * my $force_xosc_stable = 0x0; + * my $Selfb = 0x0; #Poseidon $Selfb=1 + * my $Filterfb = 0x3; #Poseidon $Filterfb=0 + * my $Filtervc = 0x0; + * my $disc = 0x0; + * my $discdel = 0x4; + * my $spare = 0x0; + * $reg_PMU1 = + * $pwd | ($Nfdiv<<1) | ($Refv<<4) | ($Gm1<<8) | + * ($classb<<11) | ($Cc<<14) | ($Rc<<17) | ($ramp_slope<<20) | + * ($Segm<<24) | ($use_local_osc<<26) | + * ($force_xosc_stable<<27) | ($Selfb<<28) | ($Filterfb<<29); + * $reg_PMU2 = $handle->reg_rd("ch0_PMU2"); + * $reg_PMU2 = ($reg_PMU2 & 0xfe3fffff) | ($Filtervc<<22); + * $reg_PMU2 = ($reg_PMU2 & 0xe3ffffff) | ($discdel<<26); + * $reg_PMU2 = ($reg_PMU2 & 0x1fffffff) | ($spare<<29); + */ + if (ahp->clk_25mhz) { + reg_pmu1_set = 0 | + (3 << 1) | (pmu_refv << 4) | (3 << 8) | (0 << 11) | + (1 << 14) | (6 << 17) | (1 << 20) | (3 << 24) | + (0 << 26) | (0 << 27) | (0 << 28) | (0 << 29); + } else { + if (AR_SREV_POSEIDON(ah)) { + reg_pmu1_set = 0 | + (5 << 1) | (7 << 4) | (2 << 8) | (0 << 11) | + (2 << 14) | (6 << 17) | (1 << 20) | (3 << 24) | + (0 << 26) | (0 << 27) | (1 << 28) | (0 << 29) ; + } else { + reg_pmu1_set = 0 | + (4 << 1) | (7 << 4) | (3 << 8) | (0 << 11) | + (1 << 14) | (6 << 17) | (1 << 20) | (3 << 24) | + (0 << 26) | (0 << 27) | (0 << 28) | (0 << 29) ; + } + } + OS_REG_RMW_FIELD(ah, reg_PMU2, AR_PHY_PMU2_PGM, 0x0); + + OS_REG_WRITE(ah, reg_PMU1, reg_pmu1_set); /* 0x638c8376 */ + reg_pmu1 = OS_REG_READ(ah, reg_PMU1); + while (reg_pmu1 != reg_pmu1_set) { + OS_REG_WRITE(ah, reg_PMU1, reg_pmu1_set); /* 0x638c8376 */ + OS_DELAY(10); + reg_pmu1 = OS_REG_READ(ah, reg_PMU1); + } + + reg_pmu2_set = + (OS_REG_READ(ah, reg_PMU2) & (~0xFFC00000)) | (4 << 26); + OS_REG_WRITE(ah, reg_PMU2, reg_pmu2_set); + reg_pmu2 = OS_REG_READ(ah, reg_PMU2); + while (reg_pmu2 != reg_pmu2_set) { + OS_REG_WRITE(ah, reg_PMU2, reg_pmu2_set); + OS_DELAY(10); + reg_pmu2 = OS_REG_READ(ah, reg_PMU2); + } + reg_pmu2_set = + (OS_REG_READ(ah, reg_PMU2) & (~0x00200000)) | (1 << 21); + OS_REG_WRITE(ah, reg_PMU2, reg_pmu2_set); + reg_pmu2 = OS_REG_READ(ah, reg_PMU2); + while (reg_pmu2 != reg_pmu2_set) { + OS_REG_WRITE(ah, reg_PMU2, reg_pmu2_set); + OS_DELAY(10); + reg_pmu2 = OS_REG_READ(ah, reg_PMU2); + } + /*#endif*/ + } else if (AR_SREV_JUPITER(ah) || AR_SREV_APHRODITE(ah)) { + /* Internal regulator is ON. Write swreg register. */ + int swreg = ar9300_eeprom_get(ahp, EEP_SWREG); + OS_REG_WRITE(ah, reg_PMU1, swreg); + } else { + /* Internal regulator is ON. Write swreg register. */ + int swreg = ar9300_eeprom_get(ahp, EEP_SWREG); + OS_REG_WRITE(ah, AR_RTC_REG_CONTROL1, + OS_REG_READ(ah, AR_RTC_REG_CONTROL1) & + (~AR_RTC_REG_CONTROL1_SWREG_PROGRAM)); + OS_REG_WRITE(ah, AR_RTC_REG_CONTROL0, swreg); + /* Set REG_CONTROL1.SWREG_PROGRAM */ + OS_REG_WRITE(ah, AR_RTC_REG_CONTROL1, + OS_REG_READ(ah, AR_RTC_REG_CONTROL1) | + AR_RTC_REG_CONTROL1_SWREG_PROGRAM); + } + } else { + if (AR_SREV_HORNET(ah) || AR_SREV_POSEIDON(ah)) { + OS_REG_RMW_FIELD(ah, reg_PMU2, AR_PHY_PMU2_PGM, 0x0); + reg_pmu2 = OS_REG_READ_FIELD(ah, reg_PMU2, AR_PHY_PMU2_PGM); + while (reg_pmu2) { + OS_DELAY(10); + reg_pmu2 = OS_REG_READ_FIELD(ah, reg_PMU2, AR_PHY_PMU2_PGM); + } + OS_REG_RMW_FIELD(ah, reg_PMU1, AR_PHY_PMU1_PWD, 0x1); + reg_pmu1 = OS_REG_READ_FIELD(ah, reg_PMU1, AR_PHY_PMU1_PWD); + while (!reg_pmu1) { + OS_DELAY(10); + reg_pmu1 = OS_REG_READ_FIELD(ah, reg_PMU1, AR_PHY_PMU1_PWD); + } + OS_REG_RMW_FIELD(ah, reg_PMU2, AR_PHY_PMU2_PGM, 0x1); + reg_pmu2 = OS_REG_READ_FIELD(ah, reg_PMU2, AR_PHY_PMU2_PGM); + while (!reg_pmu2) { + OS_DELAY(10); + reg_pmu2 = OS_REG_READ_FIELD(ah, reg_PMU2, AR_PHY_PMU2_PGM); + } + } else if (AR_SREV_JUPITER(ah) || AR_SREV_APHRODITE(ah)) { + OS_REG_RMW_FIELD(ah, reg_PMU1, AR_PHY_PMU1_PWD, 0x1); + } else { + OS_REG_WRITE(ah, AR_RTC_SLEEP_CLK, + (OS_REG_READ(ah, AR_RTC_SLEEP_CLK) | + AR_RTC_FORCE_SWREG_PRD | AR_RTC_PCIE_RST_PWDN_EN)); + } + } + + return 0; +} + +HAL_BOOL ar9300_drive_strength_apply(struct ath_hal *ah) +{ + struct ath_hal_9300 *ahp = AH9300(ah); + int drive_strength; + unsigned long reg; + + drive_strength = ar9300_eeprom_get(ahp, EEP_DRIVE_STRENGTH); + if (drive_strength) { + reg = OS_REG_READ(ah, AR_PHY_65NM_CH0_BIAS1); + reg &= ~0x00ffffc0; + reg |= 0x5 << 21; + reg |= 0x5 << 18; + reg |= 0x5 << 15; + reg |= 0x5 << 12; + reg |= 0x5 << 9; + reg |= 0x5 << 6; + OS_REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS1, reg); + + reg = OS_REG_READ(ah, AR_PHY_65NM_CH0_BIAS2); + reg &= ~0xffffffe0; + reg |= 0x5 << 29; + reg |= 0x5 << 26; + reg |= 0x5 << 23; + reg |= 0x5 << 20; + reg |= 0x5 << 17; + reg |= 0x5 << 14; + reg |= 0x5 << 11; + reg |= 0x5 << 8; + reg |= 0x5 << 5; + OS_REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS2, reg); + + reg = OS_REG_READ(ah, AR_PHY_65NM_CH0_BIAS4); + reg &= ~0xff800000; + reg |= 0x5 << 29; + reg |= 0x5 << 26; + reg |= 0x5 << 23; + OS_REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS4, reg); + } + return 0; +} + +int32_t ar9300_xpa_bias_level_get(struct ath_hal *ah, HAL_BOOL is_2ghz) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + if (is_2ghz) { + return eep->modal_header_2g.xpa_bias_lvl; + } else { + return eep->modal_header_5g.xpa_bias_lvl; + } +} + +HAL_BOOL ar9300_xpa_bias_level_apply(struct ath_hal *ah, HAL_BOOL is_2ghz) +{ + /* + * In ar9330 emu, we can't access radio registers, + * merlin is used for radio part. + */ + int bias; + bias = ar9300_xpa_bias_level_get(ah, is_2ghz); + + if (AR_SREV_HORNET(ah) || AR_SREV_POSEIDON(ah) || AR_SREV_WASP(ah)) { + OS_REG_RMW_FIELD(ah, + AR_HORNET_CH0_TOP2, AR_HORNET_CH0_TOP2_XPABIASLVL, bias); + } else if (AR_SREV_SCORPION(ah)) { + OS_REG_RMW_FIELD(ah, + AR_SCORPION_CH0_TOP, AR_SCORPION_CH0_TOP_XPABIASLVL, bias); + } else if (AR_SREV_JUPITER(ah) || AR_SREV_APHRODITE(ah)) { + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH0_TOP_JUPITER, AR_PHY_65NM_CH0_TOP_XPABIASLVL, bias); + } else { + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH0_TOP, AR_PHY_65NM_CH0_TOP_XPABIASLVL, bias); + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH0_THERM, AR_PHY_65NM_CH0_THERM_XPABIASLVL_MSB, + bias >> 2); + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH0_THERM, AR_PHY_65NM_CH0_THERM_XPASHORT2GND, 1); + } + return 0; +} + +u_int32_t ar9300_ant_ctrl_common_get(struct ath_hal *ah, HAL_BOOL is_2ghz) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + if (is_2ghz) { + return eep->modal_header_2g.ant_ctrl_common; + } else { + return eep->modal_header_5g.ant_ctrl_common; + } +} +static u_int16_t +ar9300_switch_com_spdt_get(struct ath_hal *ah, HAL_BOOL is_2ghz) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + if (is_2ghz) { + return eep->modal_header_2g.switchcomspdt; + } else { + return eep->modal_header_5g.switchcomspdt; + } +} +u_int32_t ar9300_ant_ctrl_common2_get(struct ath_hal *ah, HAL_BOOL is_2ghz) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + if (is_2ghz) { + return eep->modal_header_2g.ant_ctrl_common2; + } else { + return eep->modal_header_5g.ant_ctrl_common2; + } +} + +u_int16_t ar9300_ant_ctrl_chain_get(struct ath_hal *ah, int chain, + HAL_BOOL is_2ghz) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + if (chain >= 0 && chain < OSPREY_MAX_CHAINS) { + if (is_2ghz) { + return eep->modal_header_2g.ant_ctrl_chain[chain]; + } else { + return eep->modal_header_5g.ant_ctrl_chain[chain]; + } + } + return 0; +} + +HAL_BOOL ar9300_ant_ctrl_apply(struct ath_hal *ah, HAL_BOOL is_2ghz) +{ + u_int32_t value; + struct ath_hal_9300 *ahp = AH9300(ah); + u_int32_t regval; + struct ath_hal_private *ahpriv = AH_PRIVATE(ah); +#if ATH_ANT_DIV_COMB + HAL_CAPABILITIES *pcap = &ahpriv->ah_caps; +#endif /* ATH_ANT_DIV_COMB */ + u_int32_t xlan_gpio_cfg; + u_int8_t i; + + if (AR_SREV_POSEIDON(ah)) { + xlan_gpio_cfg = ahpriv->ah_config.ath_hal_ext_lna_ctl_gpio; + if (xlan_gpio_cfg) { + for (i = 0; i < 32; i++) { + if (xlan_gpio_cfg & (1 << i)) { + ath_hal_gpio_cfg_output(ah, i, + HAL_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED); + } + } + } + } +#define AR_SWITCH_TABLE_COM_ALL (0xffff) +#define AR_SWITCH_TABLE_COM_ALL_S (0) +#define AR_SWITCH_TABLE_COM_JUPITER_ALL (0xffffff) +#define AR_SWITCH_TABLE_COM_JUPITER_ALL_S (0) +#define AR_SWITCH_TABLE_COM_SCORPION_ALL (0xffffff) +#define AR_SWITCH_TABLE_COM_SCORPION_ALL_S (0) +#define AR_SWITCH_TABLE_COM_SPDT (0x00f00000) + value = ar9300_ant_ctrl_common_get(ah, is_2ghz); + if (AR_SREV_JUPITER(ah) || AR_SREV_APHRODITE(ah)) { + if (AR_SREV_JUPITER_10(ah)) { + /* Force SPDT setting for Jupiter 1.0 chips. */ + value &= ~AR_SWITCH_TABLE_COM_SPDT; + value |= 0x00100000; + } + OS_REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM, + AR_SWITCH_TABLE_COM_JUPITER_ALL, value); + } + else if (AR_SREV_SCORPION(ah)) { + OS_REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM, + AR_SWITCH_TABLE_COM_SCORPION_ALL, value); + } + else { + OS_REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM, + AR_SWITCH_TABLE_COM_ALL, value); + } +/* +* Jupiter2.0 defines new switch table for BT/WLAN, +* here's new field name in WB222.ref for both 2G and 5G. +* Register: [GLB_CONTROL] GLB_CONTROL (@0x20044) +* 15:12 R/W SWITCH_TABLE_COM_SPDT_WLAN_RX SWITCH_TABLE_COM_SPDT_WLAN_RX +* 11:8 R/W SWITCH_TABLE_COM_SPDT_WLAN_TX SWITCH_TABLE_COM_SPDT_WLAN_TX +* 7:4 R/W SWITCH_TABLE_COM_SPDT_WLAN_IDLE SWITCH_TABLE_COM_SPDT_WLAN_IDLE +*/ +#define AR_SWITCH_TABLE_COM_SPDT_ALL (0x0000fff0) +#define AR_SWITCH_TABLE_COM_SPDT_ALL_S (4) + if (AR_SREV_JUPITER_20_OR_LATER(ah) || AR_SREV_APHRODITE(ah)) { + value = ar9300_switch_com_spdt_get(ah, is_2ghz); + OS_REG_RMW_FIELD(ah, AR_GLB_CONTROL, + AR_SWITCH_TABLE_COM_SPDT_ALL, value); + + OS_REG_SET_BIT(ah, AR_GLB_CONTROL, + AR_BTCOEX_CTRL_SPDT_ENABLE); + //OS_REG_SET_BIT(ah, AR_GLB_CONTROL, + // AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL); + } + +#define AR_SWITCH_TABLE_COM2_ALL (0xffffff) +#define AR_SWITCH_TABLE_COM2_ALL_S (0) + value = ar9300_ant_ctrl_common2_get(ah, is_2ghz); +#if ATH_ANT_DIV_COMB + if ( AR_SREV_POSEIDON(ah) && (ahp->ah_lna_div_use_bt_ant_enable == TRUE) ) { + value &= ~AR_SWITCH_TABLE_COM2_ALL; + value |= ahpriv->ah_config.ath_hal_ant_ctrl_comm2g_switch_enable; + } +#endif /* ATH_ANT_DIV_COMB */ + OS_REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM_2, AR_SWITCH_TABLE_COM2_ALL, value); + +#define AR_SWITCH_TABLE_ALL (0xfff) +#define AR_SWITCH_TABLE_ALL_S (0) + value = ar9300_ant_ctrl_chain_get(ah, 0, is_2ghz); + OS_REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_0, AR_SWITCH_TABLE_ALL, value); + + if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah) && !AR_SREV_APHRODITE(ah)) { + value = ar9300_ant_ctrl_chain_get(ah, 1, is_2ghz); + OS_REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_1, AR_SWITCH_TABLE_ALL, value); + + if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { + value = ar9300_ant_ctrl_chain_get(ah, 2, is_2ghz); + OS_REG_RMW_FIELD(ah, + AR_PHY_SWITCH_CHAIN_2, AR_SWITCH_TABLE_ALL, value); + } + } + if (AR_SREV_HORNET(ah) || AR_SREV_POSEIDON(ah)) { + value = ar9300_eeprom_get(ahp, EEP_ANTDIV_control); + /* main_lnaconf, alt_lnaconf, main_tb, alt_tb */ + regval = OS_REG_READ(ah, AR_PHY_MC_GAIN_CTRL); + regval &= (~ANT_DIV_CONTROL_ALL); /* clear bit 25~30 */ + regval |= (value & 0x3f) << ANT_DIV_CONTROL_ALL_S; + /* enable_lnadiv */ + regval &= (~MULTICHAIN_GAIN_CTRL__ENABLE_ANT_DIV_LNADIV__MASK); + regval |= ((value >> 6) & 0x1) << + MULTICHAIN_GAIN_CTRL__ENABLE_ANT_DIV_LNADIV__SHIFT; +#if ATH_ANT_DIV_COMB + if ( AR_SREV_POSEIDON(ah) && (ahp->ah_lna_div_use_bt_ant_enable == TRUE) ) { + regval |= ANT_DIV_ENABLE; + } +#endif /* ATH_ANT_DIV_COMB */ + OS_REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval); + + /* enable fast_div */ + regval = OS_REG_READ(ah, AR_PHY_CCK_DETECT); + regval &= (~BBB_SIG_DETECT__ENABLE_ANT_FAST_DIV__MASK); + regval |= ((value >> 7) & 0x1) << + BBB_SIG_DETECT__ENABLE_ANT_FAST_DIV__SHIFT; +#if ATH_ANT_DIV_COMB + if ( AR_SREV_POSEIDON(ah) && (ahp->ah_lna_div_use_bt_ant_enable == TRUE) ) { + regval |= FAST_DIV_ENABLE; + } +#endif /* ATH_ANT_DIV_COMB */ + OS_REG_WRITE(ah, AR_PHY_CCK_DETECT, regval); + } + +#if ATH_ANT_DIV_COMB + if (AR_SREV_HORNET(ah) || AR_SREV_POSEIDON_11_OR_LATER(ah)) { + if (pcap->hal_ant_div_comb_support) { + /* If support DivComb, set MAIN to LNA1, ALT to LNA2 at beginning */ + regval = OS_REG_READ(ah, AR_PHY_MC_GAIN_CTRL); + /* clear bit 25~30 main_lnaconf, alt_lnaconf, main_tb, alt_tb */ + regval &= (~(MULTICHAIN_GAIN_CTRL__ANT_DIV_MAIN_LNACONF__MASK | + MULTICHAIN_GAIN_CTRL__ANT_DIV_ALT_LNACONF__MASK | + MULTICHAIN_GAIN_CTRL__ANT_DIV_ALT_GAINTB__MASK | + MULTICHAIN_GAIN_CTRL__ANT_DIV_MAIN_GAINTB__MASK)); + regval |= (HAL_ANT_DIV_COMB_LNA1 << + MULTICHAIN_GAIN_CTRL__ANT_DIV_MAIN_LNACONF__SHIFT); + regval |= (HAL_ANT_DIV_COMB_LNA2 << + MULTICHAIN_GAIN_CTRL__ANT_DIV_ALT_LNACONF__SHIFT); + OS_REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval); + } + + } +#endif /* ATH_ANT_DIV_COMB */ + if (AR_SREV_POSEIDON(ah) && ( ahp->ah_diversity_control == HAL_ANT_FIXED_A + || ahp->ah_diversity_control == HAL_ANT_FIXED_B)) + { + u_int32_t reg_val = OS_REG_READ(ah, AR_PHY_MC_GAIN_CTRL); + reg_val &= ~(MULTICHAIN_GAIN_CTRL__ANT_DIV_MAIN_LNACONF__MASK | + MULTICHAIN_GAIN_CTRL__ANT_DIV_ALT_LNACONF__MASK | + MULTICHAIN_GAIN_CTRL__ANT_FAST_DIV_BIAS__MASK | + MULTICHAIN_GAIN_CTRL__ANT_DIV_MAIN_GAINTB__MASK | + MULTICHAIN_GAIN_CTRL__ANT_DIV_ALT_GAINTB__MASK ); + + switch (ahp->ah_diversity_control) { + case HAL_ANT_FIXED_A: + /* Enable first antenna only */ + reg_val |= (HAL_ANT_DIV_COMB_LNA1 << + MULTICHAIN_GAIN_CTRL__ANT_DIV_MAIN_LNACONF__SHIFT); + reg_val |= (HAL_ANT_DIV_COMB_LNA2 << + MULTICHAIN_GAIN_CTRL__ANT_DIV_ALT_LNACONF__SHIFT); + /* main/alt gain table and Fast Div Bias all set to 0 */ + OS_REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, reg_val); + regval = OS_REG_READ(ah, AR_PHY_CCK_DETECT); + regval &= (~BBB_SIG_DETECT__ENABLE_ANT_FAST_DIV__MASK); + OS_REG_WRITE(ah, AR_PHY_CCK_DETECT, regval); + break; + case HAL_ANT_FIXED_B: + /* Enable second antenna only, after checking capability */ + reg_val |= (HAL_ANT_DIV_COMB_LNA2 << + MULTICHAIN_GAIN_CTRL__ANT_DIV_MAIN_LNACONF__SHIFT); + reg_val |= (HAL_ANT_DIV_COMB_LNA1 << + MULTICHAIN_GAIN_CTRL__ANT_DIV_ALT_LNACONF__SHIFT); + /* main/alt gain table and Fast Div all set to 0 */ + OS_REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, reg_val); + regval = OS_REG_READ(ah, AR_PHY_CCK_DETECT); + regval &= (~BBB_SIG_DETECT__ENABLE_ANT_FAST_DIV__MASK); + OS_REG_WRITE(ah, AR_PHY_CCK_DETECT, regval); + /* For WB225, need to swith ANT2 from BT to Wifi + * This will not affect HB125 LNA diversity feature. + */ + OS_REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM_2, AR_SWITCH_TABLE_COM2_ALL, + ahpriv->ah_config.ath_hal_ant_ctrl_comm2g_switch_enable); + break; + default: + break; + } + } + return 0; +} + +static u_int16_t +ar9300_attenuation_chain_get(struct ath_hal *ah, int chain, u_int16_t channel) +{ + int32_t f[3], t[3]; + u_int16_t value; + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + if (chain >= 0 && chain < OSPREY_MAX_CHAINS) { + if (channel < 4000) { + return eep->modal_header_2g.xatten1_db[chain]; + } else { + if (eep->base_ext2.xatten1_db_low[chain] != 0) { + t[0] = eep->base_ext2.xatten1_db_low[chain]; + f[0] = 5180; + t[1] = eep->modal_header_5g.xatten1_db[chain]; + f[1] = 5500; + t[2] = eep->base_ext2.xatten1_db_high[chain]; + f[2] = 5785; + value = interpolate(channel, f, t, 3); + return value; + } else { + return eep->modal_header_5g.xatten1_db[chain]; + } + } + } + return 0; +} + +static u_int16_t +ar9300_attenuation_margin_chain_get(struct ath_hal *ah, int chain, + u_int16_t channel) +{ + int32_t f[3], t[3]; + u_int16_t value; + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + if (chain >= 0 && chain < OSPREY_MAX_CHAINS) { + if (channel < 4000) { + return eep->modal_header_2g.xatten1_margin[chain]; + } else { + if (eep->base_ext2.xatten1_margin_low[chain] != 0) { + t[0] = eep->base_ext2.xatten1_margin_low[chain]; + f[0] = 5180; + t[1] = eep->modal_header_5g.xatten1_margin[chain]; + f[1] = 5500; + t[2] = eep->base_ext2.xatten1_margin_high[chain]; + f[2] = 5785; + value = interpolate(channel, f, t, 3); + return value; + } else { + return eep->modal_header_5g.xatten1_margin[chain]; + } + } + } + return 0; +} + +HAL_BOOL ar9300_attenuation_apply(struct ath_hal *ah, u_int16_t channel) +{ + u_int32_t value; + struct ath_hal_private *ahpriv = AH_PRIVATE(ah); + + /* Test value. if 0 then attenuation is unused. Don't load anything. */ + value = ar9300_attenuation_chain_get(ah, 0, channel); + OS_REG_RMW_FIELD(ah, + AR_PHY_EXT_ATTEN_CTL_0, AR_PHY_EXT_ATTEN_CTL_XATTEN1_DB, value); + value = ar9300_attenuation_margin_chain_get(ah, 0, channel); + if (ar9300_rx_gain_index_get(ah) == 0 + && ahpriv->ah_config.ath_hal_ext_atten_margin_cfg) + { + value = 5; + } + OS_REG_RMW_FIELD(ah, + AR_PHY_EXT_ATTEN_CTL_0, AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN, value); + + if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah)) { + value = ar9300_attenuation_chain_get(ah, 1, channel); + OS_REG_RMW_FIELD(ah, + AR_PHY_EXT_ATTEN_CTL_1, AR_PHY_EXT_ATTEN_CTL_XATTEN1_DB, value); + value = ar9300_attenuation_margin_chain_get(ah, 1, channel); + OS_REG_RMW_FIELD(ah, + AR_PHY_EXT_ATTEN_CTL_1, AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN, + value); + if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { + value = ar9300_attenuation_chain_get(ah, 2, channel); + OS_REG_RMW_FIELD(ah, + AR_PHY_EXT_ATTEN_CTL_2, AR_PHY_EXT_ATTEN_CTL_XATTEN1_DB, value); + value = ar9300_attenuation_margin_chain_get(ah, 2, channel); + OS_REG_RMW_FIELD(ah, + AR_PHY_EXT_ATTEN_CTL_2, AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN, + value); + } + } + return 0; +} + +static u_int16_t ar9300_quick_drop_get(struct ath_hal *ah, + int chain, u_int16_t channel) +{ + int32_t f[3], t[3]; + u_int16_t value; + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + + if (channel < 4000) { + return eep->modal_header_2g.quick_drop; + } else { + t[0] = eep->base_ext1.quick_drop_low; + f[0] = 5180; + t[1] = eep->modal_header_5g.quick_drop; + f[1] = 5500; + t[2] = eep->base_ext1.quick_drop_high; + f[2] = 5785; + value = interpolate(channel, f, t, 3); + return value; + } +} + + +static HAL_BOOL ar9300_quick_drop_apply(struct ath_hal *ah, u_int16_t channel) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + u_int32_t value; + // + // Test value. if 0 then quickDrop is unused. Don't load anything. + // + if (eep->base_eep_header.misc_configuration & 0x10) + { + if (AR_SREV_OSPREY(ah) || AR_SREV_AR9580(ah) || AR_SREV_WASP(ah)) + { + value = ar9300_quick_drop_get(ah, 0, channel); + OS_REG_RMW_FIELD(ah, AR_PHY_AGC, AR_PHY_AGC_QUICK_DROP, value); + } + } + return 0; +} + +static u_int16_t ar9300_tx_end_to_xpa_off_get(struct ath_hal *ah, u_int16_t channel) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + + if (channel < 4000) { + return eep->modal_header_2g.tx_end_to_xpa_off; + } else { + return eep->modal_header_5g.tx_end_to_xpa_off; + } +} + +static HAL_BOOL ar9300_tx_end_to_xpab_off_apply(struct ath_hal *ah, u_int16_t channel) +{ + u_int32_t value; + + value = ar9300_tx_end_to_xpa_off_get(ah, channel); + /* Apply to both xpaa and xpab */ + if (AR_SREV_OSPREY(ah) || AR_SREV_AR9580(ah) || AR_SREV_WASP(ah)) + { + OS_REG_RMW_FIELD(ah, AR_PHY_XPA_TIMING_CTL, + AR_PHY_XPA_TIMING_CTL_TX_END_XPAB_OFF, value); + OS_REG_RMW_FIELD(ah, AR_PHY_XPA_TIMING_CTL, + AR_PHY_XPA_TIMING_CTL_TX_END_XPAA_OFF, value); + } + return 0; +} + +static int +ar9300_eeprom_cal_pier_get(struct ath_hal *ah, int mode, int ipier, int ichain, + int *pfrequency, int *pcorrection, int *ptemperature, int *pvoltage) +{ + u_int8_t *p_cal_pier; + OSP_CAL_DATA_PER_FREQ_OP_LOOP *p_cal_pier_struct; + int is_2ghz; + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + + if (ichain >= OSPREY_MAX_CHAINS) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: Invalid chain index, must be less than %d\n", + __func__, OSPREY_MAX_CHAINS); + return -1; + } + + if (mode) {/* 5GHz */ + if (ipier >= OSPREY_NUM_5G_CAL_PIERS){ + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: Invalid 5GHz cal pier index, must be less than %d\n", + __func__, OSPREY_NUM_5G_CAL_PIERS); + return -1; + } + p_cal_pier = &(eep->cal_freq_pier_5g[ipier]); + p_cal_pier_struct = &(eep->cal_pier_data_5g[ichain][ipier]); + is_2ghz = 0; + } else { + if (ipier >= OSPREY_NUM_2G_CAL_PIERS){ + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: Invalid 2GHz cal pier index, must be less than %d\n", + __func__, OSPREY_NUM_2G_CAL_PIERS); + return -1; + } + + p_cal_pier = &(eep->cal_freq_pier_2g[ipier]); + p_cal_pier_struct = &(eep->cal_pier_data_2g[ichain][ipier]); + is_2ghz = 1; + } + *pfrequency = FBIN2FREQ(*p_cal_pier, is_2ghz); + *pcorrection = p_cal_pier_struct->ref_power; + *ptemperature = p_cal_pier_struct->temp_meas; + *pvoltage = p_cal_pier_struct->volt_meas; + return 0; +} + +/* + * Apply the recorded correction values. + */ +static int +ar9300_calibration_apply(struct ath_hal *ah, int frequency) +{ + int ichain, ipier, npier; + int mode; + int fdiff; + int pfrequency, pcorrection, ptemperature, pvoltage; + int bf, factor, plus; + + int lfrequency[AR9300_MAX_CHAINS]; + int hfrequency[AR9300_MAX_CHAINS]; + + int lcorrection[AR9300_MAX_CHAINS]; + int hcorrection[AR9300_MAX_CHAINS]; + int correction[AR9300_MAX_CHAINS]; + + int ltemperature[AR9300_MAX_CHAINS]; + int htemperature[AR9300_MAX_CHAINS]; + int temperature[AR9300_MAX_CHAINS]; + + int lvoltage[AR9300_MAX_CHAINS]; + int hvoltage[AR9300_MAX_CHAINS]; + int voltage[AR9300_MAX_CHAINS]; + + mode = (frequency >= 4000); + npier = (mode) ? OSPREY_NUM_5G_CAL_PIERS : OSPREY_NUM_2G_CAL_PIERS; + + for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) { + lfrequency[ichain] = 0; + hfrequency[ichain] = 100000; + } + /* + * identify best lower and higher frequency calibration measurement + */ + for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) { + for (ipier = 0; ipier < npier; ipier++) { + if (ar9300_eeprom_cal_pier_get( + ah, mode, ipier, ichain, + &pfrequency, &pcorrection, &ptemperature, &pvoltage) == 0) + { + fdiff = frequency - pfrequency; + /* + * this measurement is higher than our desired frequency + */ + if (fdiff <= 0) { + if (hfrequency[ichain] <= 0 || + hfrequency[ichain] >= 100000 || + fdiff > (frequency - hfrequency[ichain])) + { + /* + * new best higher frequency measurement + */ + hfrequency[ichain] = pfrequency; + hcorrection[ichain] = pcorrection; + htemperature[ichain] = ptemperature; + hvoltage[ichain] = pvoltage; + } + } + if (fdiff >= 0) { + if (lfrequency[ichain] <= 0 || + fdiff < (frequency - lfrequency[ichain])) + { + /* + * new best lower frequency measurement + */ + lfrequency[ichain] = pfrequency; + lcorrection[ichain] = pcorrection; + ltemperature[ichain] = ptemperature; + lvoltage[ichain] = pvoltage; + } + } + } + } + } + /* interpolate */ + for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: ch=%d f=%d low=%d %d h=%d %d\n", + __func__, ichain, frequency, + lfrequency[ichain], lcorrection[ichain], + hfrequency[ichain], hcorrection[ichain]); + /* + * they're the same, so just pick one + */ + if (hfrequency[ichain] == lfrequency[ichain]) { + correction[ichain] = lcorrection[ichain]; + voltage[ichain] = lvoltage[ichain]; + temperature[ichain] = ltemperature[ichain]; + } else if (frequency - lfrequency[ichain] < 1000) { + /* the low frequency is good */ + if (hfrequency[ichain] - frequency < 1000) { + /* + * The high frequency is good too - + * interpolate with round off. + */ + int mult, div, diff; + mult = frequency - lfrequency[ichain]; + div = hfrequency[ichain] - lfrequency[ichain]; + + diff = hcorrection[ichain] - lcorrection[ichain]; + bf = 2 * diff * mult / div; + plus = (bf % 2); + factor = bf / 2; + correction[ichain] = lcorrection[ichain] + factor + plus; + + diff = htemperature[ichain] - ltemperature[ichain]; + bf = 2 * diff * mult / div; + plus = (bf % 2); + factor = bf / 2; + temperature[ichain] = ltemperature[ichain] + factor + plus; + + diff = hvoltage[ichain] - lvoltage[ichain]; + bf = 2 * diff * mult / div; + plus = (bf % 2); + factor = bf / 2; + voltage[ichain] = lvoltage[ichain] + factor + plus; + } else { + /* only low is good, use it */ + correction[ichain] = lcorrection[ichain]; + temperature[ichain] = ltemperature[ichain]; + voltage[ichain] = lvoltage[ichain]; + } + } else if (hfrequency[ichain] - frequency < 1000) { + /* only high is good, use it */ + correction[ichain] = hcorrection[ichain]; + temperature[ichain] = htemperature[ichain]; + voltage[ichain] = hvoltage[ichain]; + } else { + /* nothing is good, presume 0???? */ + correction[ichain] = 0; + temperature[ichain] = 0; + voltage[ichain] = 0; + } + } + + /* GreenTx */ + if (AH_PRIVATE(ah)->ah_config.ath_hal_sta_update_tx_pwr_enable) { + if (AR_SREV_POSEIDON(ah)) { + /* Get calibrated OLPC gain delta value for GreenTx */ + AH_PRIVATE(ah)->ah_db2[POSEIDON_STORED_REG_G2_OLPC_OFFSET] = + (u_int32_t) correction[0]; + } + } + + ar9300_power_control_override( + ah, frequency, correction, voltage, temperature); + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: for frequency=%d, calibration correction = %d %d %d\n", + __func__, frequency, correction[0], correction[1], correction[2]); + + return 0; +} + +int +ar9300_power_control_override(struct ath_hal *ah, int frequency, + int *correction, int *voltage, int *temperature) +{ + int temp_slope = 0; + int temp_slope_1 = 0; + int temp_slope_2 = 0; + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + int32_t f[8], t[8],t1[3], t2[3]; + int i; + + OS_REG_RMW(ah, AR_PHY_TPC_11_B0, + (correction[0] << AR_PHY_TPC_OLPC_GAIN_DELTA_S), + AR_PHY_TPC_OLPC_GAIN_DELTA); + if (!AR_SREV_POSEIDON(ah)) { + OS_REG_RMW(ah, AR_PHY_TPC_11_B1, + (correction[1] << AR_PHY_TPC_OLPC_GAIN_DELTA_S), + AR_PHY_TPC_OLPC_GAIN_DELTA); + if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { + OS_REG_RMW(ah, AR_PHY_TPC_11_B2, + (correction[2] << AR_PHY_TPC_OLPC_GAIN_DELTA_S), + AR_PHY_TPC_OLPC_GAIN_DELTA); + } + } + /* + * enable open loop power control on chip + */ + OS_REG_RMW(ah, AR_PHY_TPC_6_B0, + (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S), AR_PHY_TPC_6_ERROR_EST_MODE); + if (!AR_SREV_POSEIDON(ah)) { + OS_REG_RMW(ah, AR_PHY_TPC_6_B1, + (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S), AR_PHY_TPC_6_ERROR_EST_MODE); + if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { + OS_REG_RMW(ah, AR_PHY_TPC_6_B2, + (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S), + AR_PHY_TPC_6_ERROR_EST_MODE); + } + } + + /* + * Enable temperature compensation + * Need to use register names + */ + if (frequency < 4000) { + temp_slope = eep->modal_header_2g.temp_slope; + } else { + if ((eep->base_eep_header.misc_configuration & 0x20) != 0) + { + for(i=0;i<8;i++) + { + t[i]=eep->base_ext1.tempslopextension[i]; + f[i]=FBIN2FREQ(eep->cal_freq_pier_5g[i], 0); + } + temp_slope=interpolate(frequency,f,t,8); + } + else + { + if(!AR_SREV_SCORPION(ah)) { + if (eep->base_ext2.temp_slope_low != 0) { + t[0] = eep->base_ext2.temp_slope_low; + f[0] = 5180; + t[1] = eep->modal_header_5g.temp_slope; + f[1] = 5500; + t[2] = eep->base_ext2.temp_slope_high; + f[2] = 5785; + temp_slope = interpolate(frequency, f, t, 3); + } else { + temp_slope = eep->modal_header_5g.temp_slope; + } + } else { + /* + * Scorpion has individual chain tempslope values + */ + t[0] = eep->base_ext1.tempslopextension[2]; + t1[0]= eep->base_ext1.tempslopextension[3]; + t2[0]= eep->base_ext1.tempslopextension[4]; + f[0] = 5180; + t[1] = eep->modal_header_5g.temp_slope; + t1[1]= eep->base_ext1.tempslopextension[0]; + t2[1]= eep->base_ext1.tempslopextension[1]; + f[1] = 5500; + t[2] = eep->base_ext1.tempslopextension[5]; + t1[2]= eep->base_ext1.tempslopextension[6]; + t2[2]= eep->base_ext1.tempslopextension[7]; + f[2] = 5785; + temp_slope = interpolate(frequency, f, t, 3); + temp_slope_1=interpolate(frequency, f, t1,3); + temp_slope_2=interpolate(frequency, f, t2,3); + } + } + } + + if (!AR_SREV_SCORPION(ah)) { + OS_REG_RMW_FIELD(ah, + AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, temp_slope); + } else { + /*Scorpion has tempSlope register for each chain*/ + /*Check whether temp_compensation feature is enabled or not*/ + if (eep->base_eep_header.feature_enable & 0x1){ + if(frequency < 4000) { + OS_REG_RMW_FIELD(ah, + AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, + eep->base_ext2.temp_slope_low); + OS_REG_RMW_FIELD(ah, + AR_SCORPION_PHY_TPC_19_B1, AR_PHY_TPC_19_ALPHA_THERM, + temp_slope); + OS_REG_RMW_FIELD(ah, + AR_SCORPION_PHY_TPC_19_B2, AR_PHY_TPC_19_ALPHA_THERM, + eep->base_ext2.temp_slope_high); + } else { + OS_REG_RMW_FIELD(ah, + AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, + temp_slope); + OS_REG_RMW_FIELD(ah, + AR_SCORPION_PHY_TPC_19_B1, AR_PHY_TPC_19_ALPHA_THERM, + temp_slope_1); + OS_REG_RMW_FIELD(ah, + AR_SCORPION_PHY_TPC_19_B2, AR_PHY_TPC_19_ALPHA_THERM, + temp_slope_2); + } + }else { + /* If temp compensation is not enabled, set all registers to 0*/ + OS_REG_RMW_FIELD(ah, + AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, 0); + OS_REG_RMW_FIELD(ah, + AR_SCORPION_PHY_TPC_19_B1, AR_PHY_TPC_19_ALPHA_THERM, 0); + OS_REG_RMW_FIELD(ah, + AR_SCORPION_PHY_TPC_19_B2, AR_PHY_TPC_19_ALPHA_THERM, 0); + } + } + OS_REG_RMW_FIELD(ah, + AR_PHY_TPC_18, AR_PHY_TPC_18_THERM_CAL_VALUE, temperature[0]); + + return 0; +} + +/************************************************************** + * ar9300_eep_def_get_max_edge_power + * + * Find the maximum conformance test limit for the given channel and CTL info + */ +static inline u_int16_t +ar9300_eep_def_get_max_edge_power(ar9300_eeprom_t *p_eep_data, u_int16_t freq, + int idx, HAL_BOOL is_2ghz) +{ + u_int16_t twice_max_edge_power = AR9300_MAX_RATE_POWER; + u_int8_t *ctl_freqbin = is_2ghz ? + &p_eep_data->ctl_freqbin_2G[idx][0] : + &p_eep_data->ctl_freqbin_5G[idx][0]; + u_int16_t num_edges = is_2ghz ? + OSPREY_NUM_BAND_EDGES_2G : OSPREY_NUM_BAND_EDGES_5G; + int i; + + /* Get the edge power */ + for (i = 0; (i < num_edges) && (ctl_freqbin[i] != AR9300_BCHAN_UNUSED); i++) + { + /* + * If there's an exact channel match or an inband flag set + * on the lower channel use the given rd_edge_power + */ + if (freq == fbin2freq(ctl_freqbin[i], is_2ghz)) { + if (is_2ghz) { + twice_max_edge_power = + p_eep_data->ctl_power_data_2g[idx].ctl_edges[i].t_power; + } else { + twice_max_edge_power = + p_eep_data->ctl_power_data_5g[idx].ctl_edges[i].t_power; + } + break; + } else if ((i > 0) && (freq < fbin2freq(ctl_freqbin[i], is_2ghz))) { + if (is_2ghz) { + if (fbin2freq(ctl_freqbin[i - 1], 1) < freq && + p_eep_data->ctl_power_data_2g[idx].ctl_edges[i - 1].flag) + { + twice_max_edge_power = + p_eep_data->ctl_power_data_2g[idx]. + ctl_edges[i - 1].t_power; + } + } else { + if (fbin2freq(ctl_freqbin[i - 1], 0) < freq && + p_eep_data->ctl_power_data_5g[idx].ctl_edges[i - 1].flag) + { + twice_max_edge_power = + p_eep_data->ctl_power_data_5g[idx]. + ctl_edges[i - 1].t_power; + } + } + /* + * Leave loop - no more affecting edges possible + * in this monotonic increasing list + */ + break; + } + } + /* + * EV89475: EEPROM might contain 0 txpower in CTL table for certain + * 2.4GHz channels. We workaround it by overwriting 60 (30 dBm) here. + */ + if (is_2ghz && (twice_max_edge_power == 0)) { + twice_max_edge_power = 60; + } + + HALASSERT(twice_max_edge_power > 0); + return twice_max_edge_power; +} + +HAL_BOOL +ar9300_eeprom_set_power_per_rate_table( + struct ath_hal *ah, + ar9300_eeprom_t *p_eep_data, + HAL_CHANNEL_INTERNAL *chan, + u_int8_t *p_pwr_array, + u_int16_t cfg_ctl, + u_int16_t antenna_reduction, + u_int16_t twice_max_regulatory_power, + u_int16_t power_limit, + u_int8_t chainmask) +{ + /* Local defines to distinguish between extension and control CTL's */ +#define EXT_ADDITIVE (0x8000) +#define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE) +#define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE) +#define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE) +#define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */ +#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 10 /* 10*log10(3)*2 */ +#define PWRINCR_3_TO_1_CHAIN 9 /* 10*log(3)*2 */ +#define PWRINCR_3_TO_2_CHAIN 3 /* floor(10*log(3/2)*2) */ +#define PWRINCR_2_TO_1_CHAIN 6 /* 10*log(2)*2 */ + + static const u_int16_t tp_scale_reduction_table[5] = + { 0, 3, 6, 9, AR9300_MAX_RATE_POWER }; + int i; + int16_t twice_largest_antenna; + u_int16_t twice_antenna_reduction = 2*antenna_reduction ; + int16_t scaled_power = 0, min_ctl_power, max_reg_allowed_power; +#define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */ +#define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */ + u_int16_t ctl_modes_for11a[] = + {CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40}; + u_int16_t ctl_modes_for11g[] = + {CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT, CTL_2GHT40}; + u_int16_t num_ctl_modes, *p_ctl_mode, ctl_mode, freq; + CHAN_CENTERS centers; + int tx_chainmask; + struct ath_hal_9300 *ahp = AH9300(ah); + u_int8_t *ctl_index; + u_int8_t ctl_num; + u_int16_t twice_min_edge_power; + u_int16_t twice_max_edge_power = AR9300_MAX_RATE_POWER; + + tx_chainmask = chainmask ? chainmask : ahp->ah_tx_chainmask; + + ar9300_get_channel_centers(ah, chan, ¢ers); + + if (IS_CHAN_2GHZ(chan)) { + ahp->twice_antenna_gain = p_eep_data->modal_header_2g.antenna_gain; + } else { + ahp->twice_antenna_gain = p_eep_data->modal_header_5g.antenna_gain; + } + + /* Save max allowed antenna gain to ease future lookups */ + ahp->twice_antenna_reduction = twice_antenna_reduction; + + /* Deduct antenna gain from EIRP to get the upper limit */ + twice_largest_antenna = (int16_t)AH_MIN((twice_antenna_reduction - + ahp->twice_antenna_gain), 0); + max_reg_allowed_power = twice_max_regulatory_power + twice_largest_antenna; + + /* Use ah_tp_scale - see bug 30070. */ + if (AH_PRIVATE(ah)->ah_tp_scale != HAL_TP_SCALE_MAX) { + max_reg_allowed_power -= + (tp_scale_reduction_table[(AH_PRIVATE(ah)->ah_tp_scale)] * 2); + } + + scaled_power = AH_MIN(power_limit, max_reg_allowed_power); + + /* + * Reduce scaled Power by number of chains active to get to + * per chain tx power level + */ + /* TODO: better value than these? */ + switch (ar9300_get_ntxchains(tx_chainmask)) { + case 1: + ahp->upper_limit[0] = AH_MAX(0, scaled_power); + break; + case 2: + scaled_power -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + ahp->upper_limit[1] = AH_MAX(0, scaled_power); + break; + case 3: + scaled_power -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + ahp->upper_limit[2] = AH_MAX(0, scaled_power); + break; + default: + HALASSERT(0); /* Unsupported number of chains */ + } + + scaled_power = AH_MAX(0, scaled_power); + + /* Get target powers from EEPROM - our baseline for TX Power */ + if (IS_CHAN_2GHZ(chan)) { + /* Setup for CTL modes */ + /* CTL_11B, CTL_11G, CTL_2GHT20 */ + num_ctl_modes = + ARRAY_LENGTH(ctl_modes_for11g) - SUB_NUM_CTL_MODES_AT_2G_40; + p_ctl_mode = ctl_modes_for11g; + + if (IS_CHAN_HT40(chan)) { + num_ctl_modes = ARRAY_LENGTH(ctl_modes_for11g); /* All 2G CTL's */ + } + } else { + /* Setup for CTL modes */ + /* CTL_11A, CTL_5GHT20 */ + num_ctl_modes = + ARRAY_LENGTH(ctl_modes_for11a) - SUB_NUM_CTL_MODES_AT_5G_40; + p_ctl_mode = ctl_modes_for11a; + + if (IS_CHAN_HT40(chan)) { + num_ctl_modes = ARRAY_LENGTH(ctl_modes_for11a); /* All 5G CTL's */ + } + } + + /* + * For MIMO, need to apply regulatory caps individually across dynamically + * running modes: CCK, OFDM, HT20, HT40 + * + * The outer loop walks through each possible applicable runtime mode. + * The inner loop walks through each ctl_index entry in EEPROM. + * The ctl value is encoded as [7:4] == test group, [3:0] == test mode. + * + */ + for (ctl_mode = 0; ctl_mode < num_ctl_modes; ctl_mode++) { + HAL_BOOL is_ht40_ctl_mode = + (p_ctl_mode[ctl_mode] == CTL_5GHT40) || + (p_ctl_mode[ctl_mode] == CTL_2GHT40); + if (is_ht40_ctl_mode) { + freq = centers.synth_center; + } else if (p_ctl_mode[ctl_mode] & EXT_ADDITIVE) { + freq = centers.ext_center; + } else { + freq = centers.ctl_center; + } + + HALDEBUG(ah, HAL_DEBUG_POWER_MGMT, + "LOOP-Mode ctl_mode %d < %d, " + "is_ht40_ctl_mode %d, EXT_ADDITIVE %d\n", + ctl_mode, num_ctl_modes, is_ht40_ctl_mode, + (p_ctl_mode[ctl_mode] & EXT_ADDITIVE)); + /* walk through each CTL index stored in EEPROM */ + if (IS_CHAN_2GHZ(chan)) { + ctl_index = p_eep_data->ctl_index_2g; + ctl_num = OSPREY_NUM_CTLS_2G; + } else { + ctl_index = p_eep_data->ctl_index_5g; + ctl_num = OSPREY_NUM_CTLS_5G; + } + + for (i = 0; (i < ctl_num) && ctl_index[i]; i++) { + HALDEBUG(ah, HAL_DEBUG_POWER_MGMT, + " LOOP-Ctlidx %d: cfg_ctl 0x%2.2x p_ctl_mode 0x%2.2x " + "ctl_index 0x%2.2x chan %d chanctl 0x%x\n", + i, cfg_ctl, p_ctl_mode[ctl_mode], ctl_index[i], + chan->channel, chan->conformance_test_limit); + + /* + * compare test group from regulatory channel list + * with test mode from p_ctl_mode list + */ + if ((((cfg_ctl & ~CTL_MODE_M) | + (p_ctl_mode[ctl_mode] & CTL_MODE_M)) == ctl_index[i]) || + (((cfg_ctl & ~CTL_MODE_M) | + (p_ctl_mode[ctl_mode] & CTL_MODE_M)) == + ((ctl_index[i] & CTL_MODE_M) | SD_NO_CTL))) + { + twice_min_edge_power = + ar9300_eep_def_get_max_edge_power( + p_eep_data, freq, i, IS_CHAN_2GHZ(chan)); + + HALDEBUG(ah, HAL_DEBUG_POWER_MGMT, + " MATCH-EE_IDX %d: ch %d is2 %d " + "2xMinEdge %d chainmask %d chains %d\n", + i, freq, IS_CHAN_2GHZ(chan), + twice_min_edge_power, tx_chainmask, + ar9300_get_ntxchains(tx_chainmask)); + + if ((cfg_ctl & ~CTL_MODE_M) == SD_NO_CTL) { + /* + * Find the minimum of all CTL edge powers + * that apply to this channel + */ + twice_max_edge_power = + AH_MIN(twice_max_edge_power, twice_min_edge_power); + } else { + /* specific */ + twice_max_edge_power = twice_min_edge_power; + break; + } + } + } + + min_ctl_power = (u_int8_t)AH_MIN(twice_max_edge_power, scaled_power); + + HALDEBUG(ah, HAL_DEBUG_POWER_MGMT, + " SEL-Min ctl_mode %d p_ctl_mode %d " + "2xMaxEdge %d sP %d min_ctl_pwr %d\n", + ctl_mode, p_ctl_mode[ctl_mode], + twice_max_edge_power, scaled_power, min_ctl_power); + + /* Apply ctl mode to correct target power set */ + switch (p_ctl_mode[ctl_mode]) { + case CTL_11B: + for (i = ALL_TARGET_LEGACY_1L_5L; i <= ALL_TARGET_LEGACY_11S; i++) { + p_pwr_array[i] = + (u_int8_t)AH_MIN(p_pwr_array[i], min_ctl_power); + } + break; + case CTL_11A: + case CTL_11G: + for (i = ALL_TARGET_LEGACY_6_24; i <= ALL_TARGET_LEGACY_54; i++) { + p_pwr_array[i] = + (u_int8_t)AH_MIN(p_pwr_array[i], min_ctl_power); +#ifdef ATH_BT_COEX + if ((ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_3WIRE) || + (ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_MCI)) + { + if ((ahp->ah_bt_coex_flag & HAL_BT_COEX_FLAG_LOWER_TX_PWR) + && (ahp->ah_bt_wlan_isolation + < HAL_BT_COEX_ISOLATION_FOR_NO_COEX)) + { + + u_int8_t reduce_pow; + + reduce_pow = (HAL_BT_COEX_ISOLATION_FOR_NO_COEX + - ahp->ah_bt_wlan_isolation) << 1; + + if (reduce_pow <= p_pwr_array[i]) { + p_pwr_array[i] -= reduce_pow; + } + } + if ((ahp->ah_bt_coex_flag & + HAL_BT_COEX_FLAG_LOW_ACK_PWR) && + (i != ALL_TARGET_LEGACY_36) && + (i != ALL_TARGET_LEGACY_48) && + (i != ALL_TARGET_LEGACY_54) && + (p_ctl_mode[ctl_mode] == CTL_11G)) + { + p_pwr_array[i] = 0; + } + } +#endif + } + break; + case CTL_5GHT20: + case CTL_2GHT20: + for (i = ALL_TARGET_HT20_0_8_16; i <= ALL_TARGET_HT20_23; i++) { + p_pwr_array[i] = + (u_int8_t)AH_MIN(p_pwr_array[i], min_ctl_power); +#ifdef ATH_BT_COEX + if (((ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_3WIRE) || + (ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_MCI)) && + (ahp->ah_bt_coex_flag & HAL_BT_COEX_FLAG_LOWER_TX_PWR) && + (ahp->ah_bt_wlan_isolation + < HAL_BT_COEX_ISOLATION_FOR_NO_COEX)) { + + u_int8_t reduce_pow = (HAL_BT_COEX_ISOLATION_FOR_NO_COEX + - ahp->ah_bt_wlan_isolation) << 1; + + if (reduce_pow <= p_pwr_array[i]) { + p_pwr_array[i] -= reduce_pow; + } + } +#if ATH_SUPPORT_MCI + else if ((ahp->ah_bt_coex_flag & + HAL_BT_COEX_FLAG_MCI_MAX_TX_PWR) && + (p_ctl_mode[ctl_mode] == CTL_2GHT20) && + (ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_MCI)) + { + u_int8_t max_pwr; + + max_pwr = MS(mci_concur_tx_max_pwr[2][1], + ATH_MCI_CONCUR_TX_LOWEST_PWR_MASK); + if (p_pwr_array[i] > max_pwr) { + p_pwr_array[i] = max_pwr; + } + } +#endif +#endif + } + break; + case CTL_11B_EXT: +#ifdef NOT_YET + target_power_cck_ext.t_pow2x[0] = (u_int8_t) + AH_MIN(target_power_cck_ext.t_pow2x[0], min_ctl_power); +#endif /* NOT_YET */ + break; + case CTL_11A_EXT: + case CTL_11G_EXT: +#ifdef NOT_YET + target_power_ofdm_ext.t_pow2x[0] = (u_int8_t) + AH_MIN(target_power_ofdm_ext.t_pow2x[0], min_ctl_power); +#endif /* NOT_YET */ + break; + case CTL_5GHT40: + case CTL_2GHT40: + for (i = ALL_TARGET_HT40_0_8_16; i <= ALL_TARGET_HT40_23; i++) { + p_pwr_array[i] = (u_int8_t) + AH_MIN(p_pwr_array[i], min_ctl_power); +#ifdef ATH_BT_COEX + if (((ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_3WIRE) || + (ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_MCI)) && + (ahp->ah_bt_coex_flag & HAL_BT_COEX_FLAG_LOWER_TX_PWR) && + (ahp->ah_bt_wlan_isolation + < HAL_BT_COEX_ISOLATION_FOR_NO_COEX)) { + + u_int8_t reduce_pow = (HAL_BT_COEX_ISOLATION_FOR_NO_COEX + - ahp->ah_bt_wlan_isolation) << 1; + + if (reduce_pow <= p_pwr_array[i]) { + p_pwr_array[i] -= reduce_pow; + } + } +#if ATH_SUPPORT_MCI + else if ((ahp->ah_bt_coex_flag & + HAL_BT_COEX_FLAG_MCI_MAX_TX_PWR) && + (p_ctl_mode[ctl_mode] == CTL_2GHT40) && + (ahp->ah_bt_coex_config_type == HAL_BT_COEX_CFG_MCI)) + { + u_int8_t max_pwr; + + max_pwr = MS(mci_concur_tx_max_pwr[3][1], + ATH_MCI_CONCUR_TX_LOWEST_PWR_MASK); + if (p_pwr_array[i] > max_pwr) { + p_pwr_array[i] = max_pwr; + } + } +#endif +#endif + } + break; + default: + HALASSERT(0); + break; + } + } /* end ctl mode checking */ + + return AH_TRUE; +#undef EXT_ADDITIVE +#undef CTL_11A_EXT +#undef CTL_11G_EXT +#undef CTL_11B_EXT +#undef REDUCE_SCALED_POWER_BY_TWO_CHAIN +#undef REDUCE_SCALED_POWER_BY_THREE_CHAIN +} + +/************************************************************** + * ar9300_eeprom_set_transmit_power + * + * Set the transmit power in the baseband for the given + * operating channel and mode. + */ +HAL_STATUS +ar9300_eeprom_set_transmit_power(struct ath_hal *ah, + ar9300_eeprom_t *p_eep_data, HAL_CHANNEL_INTERNAL *chan, u_int16_t cfg_ctl, + u_int16_t antenna_reduction, u_int16_t twice_max_regulatory_power, + u_int16_t power_limit) +{ +#define ABS(_x, _y) ((int)_x > (int)_y ? (int)_x - (int)_y : (int)_y - (int)_x) +#define INCREASE_MAXPOW_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */ +#define INCREASE_MAXPOW_BY_THREE_CHAIN 10 /* 10*log10(3)*2 */ + u_int8_t target_power_val_t2[ar9300_rate_size]; + u_int8_t target_power_val_t2_eep[ar9300_rate_size]; + int16_t twice_array_gain = 0, max_power_level = 0; + struct ath_hal_9300 *ahp = AH9300(ah); + int i = 0; + u_int32_t tmp_paprd_rate_mask = 0, *tmp_ptr = NULL; + int paprd_scale_factor = 5; + + u_int8_t *ptr_mcs_rate2power_table_index; + u_int8_t mcs_rate2power_table_index_ht20[24] = + { + ALL_TARGET_HT20_0_8_16, + ALL_TARGET_HT20_1_3_9_11_17_19, + ALL_TARGET_HT20_1_3_9_11_17_19, + ALL_TARGET_HT20_1_3_9_11_17_19, + ALL_TARGET_HT20_4, + ALL_TARGET_HT20_5, + ALL_TARGET_HT20_6, + ALL_TARGET_HT20_7, + ALL_TARGET_HT20_0_8_16, + ALL_TARGET_HT20_1_3_9_11_17_19, + ALL_TARGET_HT20_1_3_9_11_17_19, + ALL_TARGET_HT20_1_3_9_11_17_19, + ALL_TARGET_HT20_12, + ALL_TARGET_HT20_13, + ALL_TARGET_HT20_14, + ALL_TARGET_HT20_15, + ALL_TARGET_HT20_0_8_16, + ALL_TARGET_HT20_1_3_9_11_17_19, + ALL_TARGET_HT20_1_3_9_11_17_19, + ALL_TARGET_HT20_1_3_9_11_17_19, + ALL_TARGET_HT20_20, + ALL_TARGET_HT20_21, + ALL_TARGET_HT20_22, + ALL_TARGET_HT20_23 + }; + + u_int8_t mcs_rate2power_table_index_ht40[24] = + { + ALL_TARGET_HT40_0_8_16, + ALL_TARGET_HT40_1_3_9_11_17_19, + ALL_TARGET_HT40_1_3_9_11_17_19, + ALL_TARGET_HT40_1_3_9_11_17_19, + ALL_TARGET_HT40_4, + ALL_TARGET_HT40_5, + ALL_TARGET_HT40_6, + ALL_TARGET_HT40_7, + ALL_TARGET_HT40_0_8_16, + ALL_TARGET_HT40_1_3_9_11_17_19, + ALL_TARGET_HT40_1_3_9_11_17_19, + ALL_TARGET_HT40_1_3_9_11_17_19, + ALL_TARGET_HT40_12, + ALL_TARGET_HT40_13, + ALL_TARGET_HT40_14, + ALL_TARGET_HT40_15, + ALL_TARGET_HT40_0_8_16, + ALL_TARGET_HT40_1_3_9_11_17_19, + ALL_TARGET_HT40_1_3_9_11_17_19, + ALL_TARGET_HT40_1_3_9_11_17_19, + ALL_TARGET_HT40_20, + ALL_TARGET_HT40_21, + ALL_TARGET_HT40_22, + ALL_TARGET_HT40_23, + }; + + HALDEBUG(ah, HAL_DEBUG_CALIBRATE, + "%s[%d] +++chan %d,cfgctl 0x%04x " + "antenna_reduction 0x%04x, twice_max_regulatory_power 0x%04x " + "power_limit 0x%04x\n", + __func__, __LINE__, chan->channel, cfg_ctl, + antenna_reduction, twice_max_regulatory_power, power_limit); + ar9300_set_target_power_from_eeprom(ah, chan->channel, target_power_val_t2); + + if (ar9300_eeprom_get(ahp, EEP_PAPRD_ENABLED)) { + if (IS_CHAN_2GHZ(chan)) { + if (IS_CHAN_HT40(chan)) { + tmp_paprd_rate_mask = + p_eep_data->modal_header_2g.paprd_rate_mask_ht40; + tmp_ptr = &AH9300(ah)->ah_2g_paprd_rate_mask_ht40; + } else { + tmp_paprd_rate_mask = + p_eep_data->modal_header_2g.paprd_rate_mask_ht20; + tmp_ptr = &AH9300(ah)->ah_2g_paprd_rate_mask_ht20; + } + } else { + if (IS_CHAN_HT40(chan)) { + tmp_paprd_rate_mask = + p_eep_data->modal_header_5g.paprd_rate_mask_ht40; + tmp_ptr = &AH9300(ah)->ah_5g_paprd_rate_mask_ht40; + } else { + tmp_paprd_rate_mask = + p_eep_data->modal_header_5g.paprd_rate_mask_ht20; + tmp_ptr = &AH9300(ah)->ah_5g_paprd_rate_mask_ht20; + } + } + AH_PAPRD_GET_SCALE_FACTOR( + paprd_scale_factor, p_eep_data, IS_CHAN_2GHZ(chan), chan->channel); + HALDEBUG(ah, HAL_DEBUG_CALIBRATE, "%s[%d] paprd_scale_factor %d\n", + __func__, __LINE__, paprd_scale_factor); + /* PAPRD is not done yet, Scale down the EEP power */ + if (IS_CHAN_HT40(chan)) { + ptr_mcs_rate2power_table_index = + &mcs_rate2power_table_index_ht40[0]; + } else { + ptr_mcs_rate2power_table_index = + &mcs_rate2power_table_index_ht20[0]; + } + if (!chan->paprd_table_write_done) { + for (i = 0; i < 24; i++) { + /* PAPRD is done yet, so Scale down Power for PAPRD Rates*/ + if (tmp_paprd_rate_mask & (1 << i)) { + target_power_val_t2[ptr_mcs_rate2power_table_index[i]] -= + paprd_scale_factor; + HALDEBUG(ah, HAL_DEBUG_CALIBRATE, + "%s[%d]: Chan %d " + "Scale down target_power_val_t2[%d] = 0x%04x\n", + __func__, __LINE__, + chan->channel, i, target_power_val_t2[i]); + } + } + } else { + HALDEBUG(ah, HAL_DEBUG_CALIBRATE, + "%s[%d]: PAPRD Done No TGT PWR Scaling\n", __func__, __LINE__); + } + } + + /* Save the Target power for future use */ + OS_MEMCPY(target_power_val_t2_eep, target_power_val_t2, + sizeof(target_power_val_t2)); + ar9300_eeprom_set_power_per_rate_table(ah, p_eep_data, chan, + target_power_val_t2, cfg_ctl, + antenna_reduction, + twice_max_regulatory_power, + power_limit, 0); + + /* Save this for quick lookup */ + ahp->reg_dmn = chan->conformance_test_limit; + + /* + * Always use CDD/direct per rate power table for register based approach. + * For FCC, CDD calculations should factor in the array gain, hence + * this adjust call. ETSI and MKK does not have this requirement. + */ + if (is_reg_dmn_fcc(ahp->reg_dmn)) { + ar9300_adjust_reg_txpower_cdd(ah, target_power_val_t2); + } + + if (ar9300_eeprom_get(ahp, EEP_PAPRD_ENABLED)) { + for (i = 0; i < ar9300_rate_size; i++) { + /* + * EEPROM TGT PWR is not same as current TGT PWR, + * so Disable PAPRD for this rate. + * Some of APs might ask to reduce Target Power, + * if target power drops significantly, + * disable PAPRD for that rate. + */ + if (tmp_paprd_rate_mask & (1 << i)) { + if (ABS(target_power_val_t2_eep[i], target_power_val_t2[i]) > + paprd_scale_factor) + { + tmp_paprd_rate_mask &= ~(1 << i); + HALDEBUG(ah, HAL_DEBUG_CALIBRATE, + "%s: EEP TPC[%02d] 0x%08x " + "Curr TPC[%02d] 0x%08x mask = 0x%08x\n", + __func__, i, target_power_val_t2_eep[i], i, + target_power_val_t2[i], tmp_paprd_rate_mask); + } + } + + } + HALDEBUG(ah, HAL_DEBUG_CALIBRATE, + "%s: Chan %d After tmp_paprd_rate_mask = 0x%08x\n", + __func__, chan->channel, tmp_paprd_rate_mask); + if (tmp_ptr) { + *tmp_ptr = tmp_paprd_rate_mask; + } + } + + /* Write target power array to registers */ + ar9300_transmit_power_reg_write(ah, target_power_val_t2); + + /* Write target power for self generated frames to the TPC register */ + ar9300_selfgen_tpc_reg_write(ah, chan, target_power_val_t2); + + /* GreenTx or Paprd */ + if (AH_PRIVATE(ah)->ah_config.ath_hal_sta_update_tx_pwr_enable || + AH_PRIVATE(ah)->ah_caps.hal_paprd_enabled) + { + if (AR_SREV_POSEIDON(ah)) { + /*For HAL_RSSI_TX_POWER_NONE array*/ + OS_MEMCPY(ahp->ah_default_tx_power, + target_power_val_t2, + sizeof(target_power_val_t2)); + /* Get defautl tx related register setting for GreenTx */ + /* Record OB/DB */ + AH_PRIVATE(ah)->ah_ob_db1[POSEIDON_STORED_REG_OBDB] = + OS_REG_READ(ah, AR_PHY_65NM_CH0_TXRF2); + /* Record TPC settting */ + AH_PRIVATE(ah)->ah_ob_db1[POSEIDON_STORED_REG_TPC] = + OS_REG_READ(ah, AR_TPC); + /* Record BB_powertx_rate9 setting */ + AH_PRIVATE(ah)->ah_ob_db1[POSEIDON_STORED_REG_BB_PWRTX_RATE9] = + OS_REG_READ(ah, AR_PHY_BB_POWERTX_RATE9); + } + } + + /* + * Return tx power used to iwconfig. + * Since power is rate dependent, use one of the indices from the + * AR9300_Rates enum to select an entry from target_power_val_t2[] + * to report. + * Currently returns the power for HT40 MCS 0, HT20 MCS 0, or OFDM 6 Mbps + * as CCK power is less interesting (?). + */ + i = ALL_TARGET_LEGACY_6_24; /* legacy */ + if (IS_CHAN_HT40(chan)) { + i = ALL_TARGET_HT40_0_8_16; /* ht40 */ + } else if (IS_CHAN_HT20(chan)) { + i = ALL_TARGET_HT20_0_8_16; /* ht20 */ + } + max_power_level = target_power_val_t2[i]; + /* Adjusting the ah_max_power_level based on chains and antennaGain*/ + switch (ar9300_get_ntxchains(ahp->ah_tx_chainmask)) + { + case 1: + break; + case 2: + twice_array_gain = (ahp->twice_antenna_gain >= ahp->twice_antenna_reduction)? 0: + ((int16_t)AH_MIN((ahp->twice_antenna_reduction - + (ahp->twice_antenna_gain + INCREASE_MAXPOW_BY_TWO_CHAIN)), 0)); + /* Adjusting maxpower with antennaGain */ + max_power_level -= twice_array_gain; + /* Adjusting maxpower based on chain */ + max_power_level += INCREASE_MAXPOW_BY_TWO_CHAIN; + break; + case 3: + twice_array_gain = (ahp->twice_antenna_gain >= ahp->twice_antenna_reduction)? 0: + ((int16_t)AH_MIN((ahp->twice_antenna_reduction - + (ahp->twice_antenna_gain + INCREASE_MAXPOW_BY_THREE_CHAIN)), 0)); + + /* Adjusting maxpower with antennaGain */ + max_power_level -= twice_array_gain; + /* Adjusting maxpower based on chain */ + max_power_level += INCREASE_MAXPOW_BY_THREE_CHAIN; + break; + default: + HALASSERT(0); /* Unsupported number of chains */ + } + AH_PRIVATE(ah)->ah_max_power_level = (int8_t)max_power_level; + + ar9300_calibration_apply(ah, chan->channel); +#undef ABS + + /* Handle per packet TPC initializations */ + if (AH_PRIVATE(ah)->ah_config.ath_hal_desc_tpc) { + /* Transmit Power per-rate per-chain are computed here. A separate + * power table is maintained for different MIMO modes (i.e. TXBF ON, + * STBC) to enable easy lookup during packet transmit. + * The reason for maintaing each of these tables per chain is that + * the transmit power used for different number of chains is different + * depending on whether the power has been limited by the target power, + * the regulatory domain or the CTL limits. + */ + u_int mode = ath_hal_get_curmode(ah, chan); + u_int32_t val = 0; + u_int8_t chainmasks[AR9300_MAX_CHAINS] = + {OSPREY_1_CHAINMASK, OSPREY_2LOHI_CHAINMASK, OSPREY_3_CHAINMASK}; + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + OS_MEMCPY(target_power_val_t2, target_power_val_t2_eep, + sizeof(target_power_val_t2_eep)); + ar9300_eeprom_set_power_per_rate_table(ah, p_eep_data, chan, + target_power_val_t2, cfg_ctl, + antenna_reduction, + twice_max_regulatory_power, + power_limit, chainmasks[i]); + HALDEBUG(ah, HAL_DEBUG_POWER_MGMT, + " Channel = %d Chainmask = %d, Upper Limit = [%2d.%1d dBm]\n", + chan->channel, i, ahp->upper_limit[i]/2, + ahp->upper_limit[i]%2 * 5); + ar9300_init_rate_txpower(ah, mode, chan, target_power_val_t2, + chainmasks[i]); + + } + + /* Enable TPC */ + OS_REG_WRITE(ah, AR_PHY_PWRTX_MAX, AR_PHY_PWRTX_MAX_TPC_ENABLE); + /* + * Disable per chain power reduction since we are already + * accounting for this in our calculations + */ + val = OS_REG_READ(ah, AR_PHY_POWER_TX_SUB); + if (AR_SREV_WASP(ah)) { + OS_REG_WRITE(ah, AR_PHY_POWER_TX_SUB, + val & AR_PHY_POWER_TX_SUB_2_DISABLE); + } else { + OS_REG_WRITE(ah, AR_PHY_POWER_TX_SUB, + val & AR_PHY_POWER_TX_SUB_3_DISABLE); + } + } + + return HAL_OK; +} + +/************************************************************** + * ar9300_eeprom_set_addac + * + * Set the ADDAC from eeprom. + */ +void +ar9300_eeprom_set_addac(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan) +{ + + HALDEBUG(AH_NULL, HAL_DEBUG_UNMASKABLE, + "FIXME: ar9300_eeprom_def_set_addac called\n"); +#if 0 + MODAL_EEPDEF_HEADER *p_modal; + struct ath_hal_9300 *ahp = AH9300(ah); + ar9300_eeprom_t *eep = &ahp->ah_eeprom.def; + u_int8_t biaslevel; + + if (AH_PRIVATE(ah)->ah_macVersion != AR_SREV_VERSION_SOWL) { + return; + } + + HALASSERT(owl_get_eepdef_ver(ahp) == AR9300_EEP_VER); + + /* Xpa bias levels in eeprom are valid from rev 14.7 */ + if (owl_get_eepdef_rev(ahp) < AR9300_EEP_MINOR_VER_7) { + return; + } + + if (ahp->ah_emu_eeprom) { + return; + } + + p_modal = &(eep->modal_header[IS_CHAN_2GHZ(chan)]); + + if (p_modal->xpa_bias_lvl != 0xff) { + biaslevel = p_modal->xpa_bias_lvl; + } else { + /* Use freqeuncy specific xpa bias level */ + u_int16_t reset_freq_bin, freq_bin, freq_count = 0; + CHAN_CENTERS centers; + + ar9300_get_channel_centers(ah, chan, ¢ers); + + reset_freq_bin = FREQ2FBIN(centers.synth_center, IS_CHAN_2GHZ(chan)); + freq_bin = p_modal->xpa_bias_lvl_freq[0] & 0xff; + biaslevel = (u_int8_t)(p_modal->xpa_bias_lvl_freq[0] >> 14); + + freq_count++; + + while (freq_count < 3) { + if (p_modal->xpa_bias_lvl_freq[freq_count] == 0x0) { + break; + } + + freq_bin = p_modal->xpa_bias_lvl_freq[freq_count] & 0xff; + if (reset_freq_bin >= freq_bin) { + biaslevel = + (u_int8_t)(p_modal->xpa_bias_lvl_freq[freq_count] >> 14); + } else { + break; + } + freq_count++; + } + } + + /* Apply bias level to the ADDAC values in the INI array */ + if (IS_CHAN_2GHZ(chan)) { + INI_RA(&ahp->ah_ini_addac, 7, 1) = + (INI_RA(&ahp->ah_ini_addac, 7, 1) & (~0x18)) | biaslevel << 3; + } else { + INI_RA(&ahp->ah_ini_addac, 6, 1) = + (INI_RA(&ahp->ah_ini_addac, 6, 1) & (~0xc0)) | biaslevel << 6; + } +#endif +} + +u_int +ar9300_eeprom_dump_support(struct ath_hal *ah, void **pp_e) +{ + *pp_e = &(AH9300(ah)->ah_eeprom); + return sizeof(ar9300_eeprom_t); +} + +u_int8_t +ar9300_eeprom_get_num_ant_config(struct ath_hal_9300 *ahp, + HAL_FREQ_BAND freq_band) +{ +#if 0 + ar9300_eeprom_t *eep = &ahp->ah_eeprom.def; + MODAL_EEPDEF_HEADER *p_modal = + &(eep->modal_header[HAL_FREQ_BAND_2GHZ == freq_band]); + BASE_EEPDEF_HEADER *p_base = &eep->base_eep_header; + u_int8_t num_ant_config; + + num_ant_config = 1; /* default antenna configuration */ + + if (p_base->version >= 0x0E0D) { + if (p_modal->use_ant1) { + num_ant_config += 1; + } + } + + return num_ant_config; +#else + return 1; +#endif +} + +HAL_STATUS +ar9300_eeprom_get_ant_cfg(struct ath_hal_9300 *ahp, HAL_CHANNEL_INTERNAL *chan, + u_int8_t index, u_int16_t *config) +{ +#if 0 + ar9300_eeprom_t *eep = &ahp->ah_eeprom.def; + MODAL_EEPDEF_HEADER *p_modal = &(eep->modal_header[IS_CHAN_2GHZ(chan)]); + BASE_EEPDEF_HEADER *p_base = &eep->base_eep_header; + + switch (index) { + case 0: + *config = p_modal->ant_ctrl_common & 0xFFFF; + return HAL_OK; + case 1: + if (p_base->version >= 0x0E0D) { + if (p_modal->use_ant1) { + *config = ((p_modal->ant_ctrl_common & 0xFFFF0000) >> 16); + return HAL_OK; + } + } + break; + default: + break; + } +#endif + return HAL_EINVAL; +} + +u_int8_t* +ar9300_eeprom_get_cust_data(struct ath_hal_9300 *ahp) +{ + return (u_int8_t *)ahp; +} + +#ifdef UNUSED +static inline HAL_STATUS +ar9300_check_eeprom(struct ath_hal *ah) +{ +#if 0 + u_int32_t sum = 0, el; + u_int16_t *eepdata; + int i; + struct ath_hal_9300 *ahp = AH9300(ah); + HAL_BOOL need_swap = AH_FALSE; + ar9300_eeprom_t *eep = (ar9300_eeprom_t *)&ahp->ah_eeprom.def; + u_int16_t magic, magic2; + int addr; + u_int16_t temp; + + /* + ** We need to check the EEPROM data regardless of if it's in flash or + ** in EEPROM. + */ + + if (!ahp->ah_priv.priv.ah_eeprom_read( + ah, AR9300_EEPROM_MAGIC_OFFSET, &magic)) + { + HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: Reading Magic # failed\n", __func__); + return AH_FALSE; + } + + HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: Read Magic = 0x%04X\n", __func__, magic); + + if (!ar9300_eep_data_in_flash(ah)) { + + if (magic != AR9300_EEPROM_MAGIC) { + magic2 = SWAP16(magic); + + if (magic2 == AR9300_EEPROM_MAGIC) { + need_swap = AH_TRUE; + eepdata = (u_int16_t *)(&ahp->ah_eeprom); + + for (addr = 0; + addr < sizeof(ar9300_eeprom_t) / sizeof(u_int16_t); + addr++) + { + temp = SWAP16(*eepdata); + *eepdata = temp; + eepdata++; + + HALDEBUG(ah, HAL_DEBUG_EEPROM_DUMP, "0x%04X ", *eepdata); + if (((addr + 1) % 6) == 0) { + HALDEBUG(ah, HAL_DEBUG_EEPROM_DUMP, "\n"); + } + } + } else { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "Invalid EEPROM Magic. endianness missmatch.\n"); + return HAL_EEBADSUM; + } + } + } else { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "EEPROM being read from flash @0x%p\n", AH_PRIVATE(ah)->ah_st); + } + + HALDEBUG(ah, HAL_DEBUG_EEPROM, "need_swap = %s.\n", need_swap?"True":"False"); + + if (need_swap) { + el = SWAP16(ahp->ah_eeprom.def.base_eep_header.length); + } else { + el = ahp->ah_eeprom.def.base_eep_header.length; + } + + eepdata = (u_int16_t *)(&ahp->ah_eeprom.def); + for (i = 0; + i < AH_MIN(el, sizeof(ar9300_eeprom_t)) / sizeof(u_int16_t); + i++) { + sum ^= *eepdata++; + } + + if (need_swap) { + /* + * preddy: EEPROM endianness does not match. So change it + * 8bit values in eeprom data structure does not need to be swapped + * Only >8bits (16 & 32) values need to be swapped + * If a new 16 or 32 bit field is added to the EEPROM contents, + * please make sure to swap the field here + */ + u_int32_t integer, j; + u_int16_t word; + + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "EEPROM Endianness is not native.. Changing \n"); + + /* convert Base Eep header */ + word = SWAP16(eep->base_eep_header.length); + eep->base_eep_header.length = word; + + word = SWAP16(eep->base_eep_header.checksum); + eep->base_eep_header.checksum = word; + + word = SWAP16(eep->base_eep_header.version); + eep->base_eep_header.version = word; + + word = SWAP16(eep->base_eep_header.reg_dmn[0]); + eep->base_eep_header.reg_dmn[0] = word; + + word = SWAP16(eep->base_eep_header.reg_dmn[1]); + eep->base_eep_header.reg_dmn[1] = word; + + word = SWAP16(eep->base_eep_header.rf_silent); + eep->base_eep_header.rf_silent = word; + + word = SWAP16(eep->base_eep_header.blue_tooth_options); + eep->base_eep_header.blue_tooth_options = word; + + word = SWAP16(eep->base_eep_header.device_cap); + eep->base_eep_header.device_cap = word; + + /* convert Modal Eep header */ + for (j = 0; j < ARRAY_LENGTH(eep->modal_header); j++) { + MODAL_EEPDEF_HEADER *p_modal = &eep->modal_header[j]; + integer = SWAP32(p_modal->ant_ctrl_common); + p_modal->ant_ctrl_common = integer; + + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + integer = SWAP32(p_modal->ant_ctrl_chain[i]); + p_modal->ant_ctrl_chain[i] = integer; + } + + for (i = 0; i < AR9300_EEPROM_MODAL_SPURS; i++) { + word = SWAP16(p_modal->spur_chans[i].spur_chan); + p_modal->spur_chans[i].spur_chan = word; + } + } + } + + /* Check CRC - Attach should fail on a bad checksum */ + if (sum != 0xffff || owl_get_eepdef_ver(ahp) != AR9300_EEP_VER || + owl_get_eepdef_rev(ahp) < AR9300_EEP_NO_BACK_VER) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "Bad EEPROM checksum 0x%x or revision 0x%04x\n", + sum, owl_get_eepdef_ver(ahp)); + return HAL_EEBADSUM; + } +#ifdef EEPROM_DUMP + ar9300_eeprom_def_dump(ah, eep); +#endif + +#if 0 +#ifdef AH_AR9300_OVRD_TGT_PWR + + /* + * 14.4 EEPROM contains low target powers. + * Hardcode until EEPROM > 14.4 + */ + if (owl_get_eepdef_ver(ahp) == 14 && owl_get_eepdef_rev(ahp) <= 4) { + MODAL_EEPDEF_HEADER *p_modal; + +#ifdef EEPROM_DUMP + HALDEBUG(ah, HAL_DEBUG_POWER_OVERRIDE, "Original Target Powers\n"); + ar9300_eep_def_dump_tgt_power(ah, eep); +#endif + HALDEBUG(ah, HAL_DEBUG_POWER_OVERRIDE, + "Override Target Powers. EEPROM Version is %d.%d, " + "Device Type %d\n", + owl_get_eepdef_ver(ahp), + owl_get_eepdef_rev(ahp), + eep->base_eep_header.device_type); + + + ar9300_eep_def_override_tgt_power(ah, eep); + + if (eep->base_eep_header.device_type == 5) { + /* for xb72 only: improve transmit EVM for interop */ + p_modal = &eep->modal_header[1]; + p_modal->tx_frame_to_data_start = 0x23; + p_modal->tx_frame_to_xpa_on = 0x23; + p_modal->tx_frame_to_pa_on = 0x23; + } + +#ifdef EEPROM_DUMP + HALDEBUG(ah, HAL_DEBUG_POWER_OVERRIDE, "Modified Target Powers\n"); + ar9300_eep_def_dump_tgt_power(ah, eep); +#endif + } +#endif /* AH_AR9300_OVRD_TGT_PWR */ +#endif +#endif + return HAL_OK; +} +#endif + +static u_int16_t +ar9300_eeprom_get_spur_chan(struct ath_hal *ah, u_int16_t i, HAL_BOOL is_2ghz) +{ + u_int16_t spur_val = AR_NO_SPUR; +#if 0 + struct ath_hal_9300 *ahp = AH9300(ah); + ar9300_eeprom_t *eep = (ar9300_eeprom_t *)&ahp->ah_eeprom; + + HALASSERT(i < AR_EEPROM_MODAL_SPURS ); + + HALDEBUG(ah, HAL_DEBUG_ANI, + "Getting spur idx %d is2Ghz. %d val %x\n", + i, is_2ghz, + AH_PRIVATE(ah)->ah_config.ath_hal_spur_chans[i][is_2ghz]); + + switch (AH_PRIVATE(ah)->ah_config.ath_hal_spur_mode) { + case SPUR_DISABLE: + /* returns AR_NO_SPUR */ + break; + case SPUR_ENABLE_IOCTL: + spur_val = AH_PRIVATE(ah)->ah_config.ath_hal_spur_chans[i][is_2ghz]; + HALDEBUG(ah, HAL_DEBUG_ANI, + "Getting spur val from new loc. %d\n", spur_val); + break; + case SPUR_ENABLE_EEPROM: + spur_val = eep->modal_header[is_2ghz].spur_chans[i].spur_chan; + break; + + } +#endif + return spur_val; +} + +#ifdef UNUSED +static inline HAL_BOOL +ar9300_fill_eeprom(struct ath_hal *ah) +{ + return ar9300_eeprom_restore(ah); +} +#endif + +u_int16_t +ar9300_eeprom_struct_size(void) +{ + return sizeof(ar9300_eeprom_t); +} + +int ar9300_eeprom_struct_default_many(void) +{ + return ARRAY_LENGTH(default9300); +} + + +ar9300_eeprom_t * +ar9300_eeprom_struct_default(int default_index) +{ + if (default_index >= 0 && + default_index < ARRAY_LENGTH(default9300)) + { + return default9300[default_index]; + } else { + return 0; + } +} + +ar9300_eeprom_t * +ar9300_eeprom_struct_default_find_by_id(int id) +{ + int it; + + for (it = 0; it < ARRAY_LENGTH(default9300); it++) { + if (default9300[it] != 0 && default9300[it]->template_version == id) { + return default9300[it]; + } + } + return 0; +} + + +HAL_BOOL +ar9300_calibration_data_read_flash(struct ath_hal *ah, long address, + u_int8_t *buffer, int many) +{ + + if (((address) < 0) || ((address + many) > AR9300_EEPROM_SIZE - 1)) { + return AH_FALSE; + } + return AH_FALSE; +} + +HAL_BOOL +ar9300_calibration_data_read_eeprom(struct ath_hal *ah, long address, + u_int8_t *buffer, int many) +{ + int i; + u_int8_t value[2]; + unsigned long eep_addr; + unsigned long byte_addr; + u_int16_t *svalue; + struct ath_hal_9300 *ahp = AH9300(ah); + + if (((address) < 0) || ((address + many) > AR9300_EEPROM_SIZE)) { + return AH_FALSE; + } + + for (i = 0; i < many; i++) { + eep_addr = (u_int16_t) (address + i) / 2; + byte_addr = (u_int16_t) (address + i) % 2; + svalue = (u_int16_t *) value; + if (!ahp->ah_priv.priv.ah_eeprom_read(ah, eep_addr, svalue)) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: Unable to read eeprom region \n", __func__); + return AH_FALSE; + } + buffer[i] = (*svalue >> (8 * byte_addr)) & 0xff; + } + return AH_TRUE; +} + +HAL_BOOL +ar9300_calibration_data_read_otp(struct ath_hal *ah, long address, + u_int8_t *buffer, int many, HAL_BOOL is_wifi) +{ + int i; + unsigned long eep_addr; + unsigned long byte_addr; + u_int32_t svalue; + + if (((address) < 0) || ((address + many) > 0x400)) { + return AH_FALSE; + } + + for (i = 0; i < many; i++) { + eep_addr = (u_int16_t) (address + i) / 4; /* otp is 4 bytes long???? */ + byte_addr = (u_int16_t) (address + i) % 4; + if (!ar9300_otp_read(ah, eep_addr, &svalue, is_wifi)) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: Unable to read otp region \n", __func__); + return AH_FALSE; + } + buffer[i] = (svalue >> (8 * byte_addr)) & 0xff; + } + return AH_TRUE; +} + +#ifdef ATH_CAL_NAND_FLASH +HAL_BOOL +ar9300_calibration_data_read_nand(struct ath_hal *ah, long address, + u_int8_t *buffer, int many) +{ + int ret_len; + int ret_val = 1; + + /* Calling OS based API to read NAND */ + ret_val = OS_NAND_FLASH_READ(ATH_CAL_NAND_PARTITION, address, many, &ret_len, buffer); + + return (ret_val ? AH_FALSE: AH_TRUE); +} +#endif + +HAL_BOOL +ar9300_calibration_data_read(struct ath_hal *ah, long address, + u_int8_t *buffer, int many) +{ + switch (AH9300(ah)->calibration_data_source) { + case calibration_data_flash: + return ar9300_calibration_data_read_flash(ah, address, buffer, many); + case calibration_data_eeprom: + return ar9300_calibration_data_read_eeprom(ah, address, buffer, many); + case calibration_data_otp: + return ar9300_calibration_data_read_otp(ah, address, buffer, many, 1); +#ifdef ATH_CAL_NAND_FLASH + case calibration_data_nand: + return ar9300_calibration_data_read_nand(ah,address,buffer,many); +#endif + + } + return AH_FALSE; +} + + +HAL_BOOL +ar9300_calibration_data_read_array(struct ath_hal *ah, int address, + u_int8_t *buffer, int many) +{ + int it; + + for (it = 0; it < many; it++) { + (void)ar9300_calibration_data_read(ah, address - it, buffer + it, 1); + } + return AH_TRUE; +} + + +/* + * the address where the first configuration block is written + */ +static const int base_address = 0x3ff; /* 1KB */ +static const int base_address_512 = 0x1ff; /* 512Bytes */ + +/* + * the address where the NAND first configuration block is written + */ +#ifdef ATH_CAL_NAND_FLASH +static const int base_address_nand = AR9300_FLASH_CAL_START_OFFSET; +#endif + + +/* + * the lower limit on configuration data + */ +static const int low_limit = 0x040; + +/* + * returns size of the physical eeprom in bytes. + * 1024 and 2048 are normal sizes. + * 0 means there is no eeprom. + */ +int32_t +ar9300_eeprom_size(struct ath_hal *ah) +{ + u_int16_t data; + /* + * first we'll try for 4096 bytes eeprom + */ + if (ar9300_eeprom_read_word(ah, 2047, &data)) { + if (data != 0) { + return 4096; + } + } + /* + * then we'll try for 2048 bytes eeprom + */ + if (ar9300_eeprom_read_word(ah, 1023, &data)) { + if (data != 0) { + return 2048; + } + } + /* + * then we'll try for 1024 bytes eeprom + */ + if (ar9300_eeprom_read_word(ah, 511, &data)) { + if (data != 0) { + return 1024; + } + } + return 0; +} + +/* + * returns size of the physical otp in bytes. + * 1024 and 2048 are normal sizes. + * 0 means there is no eeprom. + */ +int32_t ar9300_otp_size(struct ath_hal *ah); +int32_t +ar9300_otp_size(struct ath_hal *ah) +{ + if (AR_SREV_POSEIDON(ah) || AR_SREV_HORNET(ah)) { + return base_address_512+1; + } else { + return base_address+1; + } +} + + +/* + * find top of memory + */ +int +ar9300_eeprom_base_address(struct ath_hal *ah) +{ + int size; + + if (AH9300(ah)->calibration_data_source == calibration_data_otp) { + return ar9300_otp_size(ah)-1; + } + else + { + size = ar9300_eeprom_size(ah); + if (size > 0) { + return size - 1; + } else { + return ar9300_otp_size(ah)-1; + } + } +} + +int +ar9300_eeprom_volatile(struct ath_hal *ah) +{ + if (AH9300(ah)->calibration_data_source == calibration_data_otp) { + return 0; /* no eeprom, use otp */ + } else { + return 1; /* board has eeprom or flash */ + } +} + +/* + * need to change this to look for the pcie data in the low parts of memory + * cal data needs to stop a few locations above + */ +int +ar9300_eeprom_low_limit(struct ath_hal *ah) +{ + return low_limit; +} + +u_int16_t +ar9300_compression_checksum(u_int8_t *data, int dsize) +{ + int it; + int checksum = 0; + + for (it = 0; it < dsize; it++) { + checksum += data[it]; + checksum &= 0xffff; + } + + return checksum; +} + +int +ar9300_compression_header_unpack(u_int8_t *best, int *code, int *reference, + int *length, int *major, int *minor) +{ + unsigned long value[4]; + + value[0] = best[0]; + value[1] = best[1]; + value[2] = best[2]; + value[3] = best[3]; + *code = ((value[0] >> 5) & 0x0007); + *reference = (value[0] & 0x001f) | ((value[1] >> 2) & 0x0020); + *length = ((value[1] << 4) & 0x07f0) | ((value[2] >> 4) & 0x000f); + *major = (value[2] & 0x000f); + *minor = (value[3] & 0x00ff); + + return 4; +} + + +static HAL_BOOL +ar9300_uncompress_block(struct ath_hal *ah, u_int8_t *mptr, int mdata_size, + u_int8_t *block, int size) +{ + int it; + int spot; + int offset; + int length; + + spot = 0; + for (it = 0; it < size; it += (length + 2)) { + offset = block[it]; + offset &= 0xff; + spot += offset; + length = block[it + 1]; + length &= 0xff; + if (length > 0 && spot >= 0 && spot + length <= mdata_size) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: Restore at %d: spot=%d offset=%d length=%d\n", + __func__, it, spot, offset, length); + OS_MEMCPY(&mptr[spot], &block[it + 2], length); + spot += length; + } else if (length > 0) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: Bad restore at %d: spot=%d offset=%d length=%d\n", + __func__, it, spot, offset, length); + return AH_FALSE; + } + } + return AH_TRUE; +} + +static int +ar9300_eeprom_restore_internal_address(struct ath_hal *ah, + ar9300_eeprom_t *mptr, int mdata_size, int cptr, u_int8_t blank) +{ + u_int8_t word[MOUTPUT]; + ar9300_eeprom_t *dptr; /* was uint8 */ + int code; + int reference, length, major, minor; + int osize; + int it; + int restored; + u_int16_t checksum, mchecksum; + + restored = 0; + for (it = 0; it < MSTATE; it++) { + (void) ar9300_calibration_data_read_array( + ah, cptr, word, compression_header_length); + if (word[0] == blank && word[1] == blank && word[2] == blank && word[3] == blank) + { + break; + } + ar9300_compression_header_unpack( + word, &code, &reference, &length, &major, &minor); + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: Found block at %x: " + "code=%d ref=%d length=%d major=%d minor=%d\n", + __func__, cptr, code, reference, length, major, minor); +#ifdef DONTUSE + if (length >= 1024) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: Skipping bad header\n", __func__); + cptr -= compression_header_length; + continue; + } +#endif + osize = length; + (void) ar9300_calibration_data_read_array( + ah, cptr, word, + compression_header_length + osize + compression_checksum_length); + checksum = ar9300_compression_checksum( + &word[compression_header_length], length); + mchecksum = + word[compression_header_length + osize] | + (word[compression_header_length + osize + 1] << 8); + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: checksum %x %x\n", __func__, checksum, mchecksum); + if (checksum == mchecksum) { + switch (code) { + case _compress_none: + if (length != mdata_size) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: EEPROM structure size mismatch " + "memory=%d eeprom=%d\n", __func__, mdata_size, length); + return -1; + } + OS_MEMCPY((u_int8_t *)mptr, + (u_int8_t *)(word + compression_header_length), length); + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: restored eeprom %d: uncompressed, length %d\n", + __func__, it, length); + restored = 1; + break; +#ifdef UNUSED + case _compress_lzma: + if (reference == reference_current) { + dptr = mptr; + } else { + dptr = (u_int8_t *)ar9300_eeprom_struct_default_find_by_id( + reference); + if (dptr == 0) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: Can't find reference eeprom struct %d\n", + __func__, reference); + goto done; + } + } + usize = -1; + if (usize != mdata_size) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: uncompressed data is wrong size %d %d\n", + __func__, usize, mdata_size); + goto done; + } + + for (ib = 0; ib < mdata_size; ib++) { + mptr[ib] = dptr[ib] ^ word[ib + overhead]; + } + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: restored eeprom %d: compressed, " + "reference %d, length %d\n", + __func__, it, reference, length); + break; + case _compress_pairs: + if (reference == reference_current) { + dptr = mptr; + } else { + dptr = (u_int8_t *)ar9300_eeprom_struct_default_find_by_id( + reference); + if (dptr == 0) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: Can't find the reference " + "eeprom structure %d\n", + __func__, reference); + goto done; + } + } + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: restored eeprom %d: " + "pairs, reference %d, length %d,\n", + __func__, it, reference, length); + break; +#endif + case _compress_block: + if (reference == reference_current) { + dptr = mptr; + } else { + dptr = ar9300_eeprom_struct_default_find_by_id(reference); + if (dptr == 0) { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: cant find reference eeprom struct %d\n", + __func__, reference); + break; + } + OS_MEMCPY(mptr, dptr, mdata_size); + } + + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: restore eeprom %d: block, reference %d, length %d\n", + __func__, it, reference, length); + (void) ar9300_uncompress_block(ah, + (u_int8_t *) mptr, mdata_size, + (u_int8_t *) (word + compression_header_length), length); + restored = 1; + break; + default: + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: unknown compression code %d\n", __func__, code); + break; + } + } else { + HALDEBUG(ah, HAL_DEBUG_EEPROM, + "%s: skipping block with bad checksum\n", __func__); + } + cptr -= compression_header_length + osize + compression_checksum_length; + } + + if (!restored) { + cptr = -1; + } + return cptr; +} + +static int +ar9300_eeprom_restore_from_dram(struct ath_hal *ah, ar9300_eeprom_t *mptr, + int mdata_size) +{ + struct ath_hal_9300 *ahp = AH9300(ah); +#if !defined(USE_PLATFORM_FRAMEWORK) + char *cal_ptr; +#endif + + + HALASSERT(mdata_size > 0); + + /* if cal_in_flash is AH_TRUE, the address sent by LMAC to HAL + (i.e. ah->ah_st) is corresponding to Flash. so return from + here if ar9300_eep_data_in_flash(ah) returns AH_TRUE */ + if(ar9300_eep_data_in_flash(ah)) + return -1; + + /* check if LMAC sent DRAM address is valid */ + if (!(uintptr_t)(AH_PRIVATE(ah)->ah_st)) { + return -1; + } + + /* When calibration data is from host, Host will copy the + compressed data to the predefined DRAM location saved at ah->ah_st */ + ath_hal_printf(ah, "Restoring Cal data from DRAM\n"); + ahp->ah_cal_mem = OS_REMAP((uintptr_t)(AH_PRIVATE(ah)->ah_st), + HOST_CALDATA_SIZE); + if (!ahp->ah_cal_mem) + { + HALDEBUG(ah, HAL_DEBUG_EEPROM,"%s: can't remap dram region\n", __func__); + return -1; + } +#if !defined(USE_PLATFORM_FRAMEWORK) + cal_ptr = &((char *)(ahp->ah_cal_mem))[AR9300_FLASH_CAL_START_OFFSET]; + OS_MEMCPY(mptr, cal_ptr, mdata_size); +#else + OS_MEMCPY(mptr, ahp->ah_cal_mem, mdata_size); +#endif + + if (mptr->eeprom_version == 0xff || + mptr->template_version == 0xff || + mptr->eeprom_version == 0 || + mptr->template_version == 0) + { + /* The board is uncalibrated */ + return -1; + } + if (mptr->eeprom_version != 0x2) + { + return -1; + } + + return mdata_size; + +} + +static int +ar9300_eeprom_restore_from_flash(struct ath_hal *ah, ar9300_eeprom_t *mptr, + int mdata_size) +{ + struct ath_hal_9300 *ahp = AH9300(ah); + char *cal_ptr; + + HALASSERT(mdata_size > 0); + + if (!ahp->ah_cal_mem) { + return -1; + } + + ath_hal_printf(ah, "Restoring Cal data from Flash\n"); + /* + * When calibration data is saved in flash, read + * uncompressed eeprom structure from flash and return + */ + cal_ptr = &((char *)(ahp->ah_cal_mem))[AR9300_FLASH_CAL_START_OFFSET]; + OS_MEMCPY(mptr, cal_ptr, mdata_size); +#if 0 + ar9300_swap_eeprom((ar9300_eeprom_t *)mptr); DONE IN ar9300_restore() +#endif + if (mptr->eeprom_version == 0xff || + mptr->template_version == 0xff || + mptr->eeprom_version == 0 || + mptr->template_version == 0) + { + /* The board is uncalibrated */ + return -1; + } + if (mptr->eeprom_version != 0x2) + { + return -1; + } + return mdata_size; +} + +/* + * Read the configuration data from the storage. We try the order with: + * EEPROM, Flash, OTP. If all of above failed, use the default template. + * The data can be put in any specified memory buffer. + * + * Returns -1 on error. + * Returns address of next memory location on success. + */ +int +ar9300_eeprom_restore_internal(struct ath_hal *ah, ar9300_eeprom_t *mptr, + int mdata_size) +{ + int nptr; + + nptr = -1; + + if ((AH9300(ah)->calibration_data_try == calibration_data_none || + AH9300(ah)->calibration_data_try == calibration_data_dram) && + AH9300(ah)->try_dram && nptr < 0) + { + AH9300(ah)->calibration_data_source = calibration_data_dram; + AH9300(ah)->calibration_data_source_address = 0; + nptr = ar9300_eeprom_restore_from_dram(ah, mptr, mdata_size); + if (nptr < 0) { + AH9300(ah)->calibration_data_source = calibration_data_none; + AH9300(ah)->calibration_data_source_address = 0; + } + } + + if ((AH9300(ah)->calibration_data_try == calibration_data_none || + AH9300(ah)->calibration_data_try == calibration_data_eeprom) && + AH9300(ah)->try_eeprom && nptr < 0) + { + /* + * need to look at highest eeprom address as well as at + * base_address=0x3ff where we used to write the data + */ + AH9300(ah)->calibration_data_source = calibration_data_eeprom; + if (AH9300(ah)->calibration_data_try_address != 0) { + AH9300(ah)->calibration_data_source_address = + AH9300(ah)->calibration_data_try_address; + nptr = ar9300_eeprom_restore_internal_address( + ah, mptr, mdata_size, + AH9300(ah)->calibration_data_source_address, 0xff); + } else { + AH9300(ah)->calibration_data_source_address = + ar9300_eeprom_base_address(ah); + nptr = ar9300_eeprom_restore_internal_address( + ah, mptr, mdata_size, + AH9300(ah)->calibration_data_source_address, 0xff); + if (nptr < 0 && + AH9300(ah)->calibration_data_source_address != base_address) + { + AH9300(ah)->calibration_data_source_address = base_address; + nptr = ar9300_eeprom_restore_internal_address( + ah, mptr, mdata_size, + AH9300(ah)->calibration_data_source_address, 0xff); + } + } + if (nptr < 0) { + AH9300(ah)->calibration_data_source = calibration_data_none; + AH9300(ah)->calibration_data_source_address = 0; + } + } + + /* + * ##### should be an ifdef test for any AP usage, + * either in driver or in nart + */ + if ((AH9300(ah)->calibration_data_try == calibration_data_none || + AH9300(ah)->calibration_data_try == calibration_data_flash) && + AH9300(ah)->try_flash && nptr < 0) + { + AH9300(ah)->calibration_data_source = calibration_data_flash; + /* how are we supposed to set this for flash? */ + AH9300(ah)->calibration_data_source_address = 0; + nptr = ar9300_eeprom_restore_from_flash(ah, mptr, mdata_size); + if (nptr < 0) { + AH9300(ah)->calibration_data_source = calibration_data_none; + AH9300(ah)->calibration_data_source_address = 0; + } + } + + if ((AH9300(ah)->calibration_data_try == calibration_data_none || + AH9300(ah)->calibration_data_try == calibration_data_otp) && + AH9300(ah)->try_otp && nptr < 0) + { + AH9300(ah)->calibration_data_source = calibration_data_otp; + if (AH9300(ah)->calibration_data_try_address != 0) { + AH9300(ah)->calibration_data_source_address = + AH9300(ah)->calibration_data_try_address; + } else { + AH9300(ah)->calibration_data_source_address = + ar9300_eeprom_base_address(ah); + } + nptr = ar9300_eeprom_restore_internal_address( + ah, mptr, mdata_size, AH9300(ah)->calibration_data_source_address, 0); + if (nptr < 0) { + AH9300(ah)->calibration_data_source = calibration_data_none; + AH9300(ah)->calibration_data_source_address = 0; + } + } + +#ifdef ATH_CAL_NAND_FLASH + if ((AH9300(ah)->calibration_data_try == calibration_data_none || + AH9300(ah)->calibration_data_try == calibration_data_nand) && + AH9300(ah)->try_nand && nptr < 0) + { + AH9300(ah)->calibration_data_source = calibration_data_nand; + AH9300(ah)->calibration_data_source_address = ((unsigned int)(AH_PRIVATE(ah)->ah_st)) + base_address_nand; + if(ar9300_calibration_data_read( + ah, AH9300(ah)->calibration_data_source_address, + (u_int8_t *)mptr, mdata_size) == AH_TRUE) + { + nptr = mdata_size; + } + /*nptr=ar9300EepromRestoreInternalAddress(ah, mptr, mdataSize, CalibrationDataSourceAddress);*/ + if(nptr < 0) + { + AH9300(ah)->calibration_data_source = calibration_data_none; + AH9300(ah)->calibration_data_source_address = 0; + } + } +#endif + if (nptr < 0) { + ath_hal_printf(ah, "%s[%d] No vaid CAL, calling default template\n", + __func__, __LINE__); + nptr = ar9300_eeprom_restore_something(ah, mptr, mdata_size); + } + + return nptr; +} + +/******************************************************************************/ +/*! +** \brief Eeprom Swapping Function +** +** This function will swap the contents of the "longer" EEPROM data items +** to ensure they are consistent with the endian requirements for the platform +** they are being compiled for +** +** \param eh Pointer to the EEPROM data structure +** \return N/A +*/ +#if AH_BYTE_ORDER == AH_BIG_ENDIAN +void +ar9300_swap_eeprom(ar9300_eeprom_t *eep) +{ + u_int32_t dword; + u_int16_t word; + int i; + + word = __bswap16(eep->base_eep_header.reg_dmn[0]); + eep->base_eep_header.reg_dmn[0] = word; + + word = __bswap16(eep->base_eep_header.reg_dmn[1]); + eep->base_eep_header.reg_dmn[1] = word; + + dword = __bswap32(eep->base_eep_header.swreg); + eep->base_eep_header.swreg = dword; + + dword = __bswap32(eep->modal_header_2g.ant_ctrl_common); + eep->modal_header_2g.ant_ctrl_common = dword; + + dword = __bswap32(eep->modal_header_2g.ant_ctrl_common2); + eep->modal_header_2g.ant_ctrl_common2 = dword; + + dword = __bswap32(eep->modal_header_2g.paprd_rate_mask_ht20); + eep->modal_header_2g.paprd_rate_mask_ht20 = dword; + + dword = __bswap32(eep->modal_header_2g.paprd_rate_mask_ht40); + eep->modal_header_2g.paprd_rate_mask_ht40 = dword; + + dword = __bswap32(eep->modal_header_5g.ant_ctrl_common); + eep->modal_header_5g.ant_ctrl_common = dword; + + dword = __bswap32(eep->modal_header_5g.ant_ctrl_common2); + eep->modal_header_5g.ant_ctrl_common2 = dword; + + dword = __bswap32(eep->modal_header_5g.paprd_rate_mask_ht20); + eep->modal_header_5g.paprd_rate_mask_ht20 = dword; + + dword = __bswap32(eep->modal_header_5g.paprd_rate_mask_ht40); + eep->modal_header_5g.paprd_rate_mask_ht40 = dword; + + for (i = 0; i < OSPREY_MAX_CHAINS; i++) { + word = __bswap16(eep->modal_header_2g.ant_ctrl_chain[i]); + eep->modal_header_2g.ant_ctrl_chain[i] = word; + + word = __bswap16(eep->modal_header_5g.ant_ctrl_chain[i]); + eep->modal_header_5g.ant_ctrl_chain[i] = word; + } +} + +void ar9300_eeprom_template_swap(void) +{ + int it; + ar9300_eeprom_t *dptr; + + for (it = 0; it < ARRAY_LENGTH(default9300); it++) { + dptr = ar9300_eeprom_struct_default(it); + if (dptr != 0) { + ar9300_swap_eeprom(dptr); + } + } +} +#endif + + +/* + * Restore the configuration structure by reading the eeprom. + * This function destroys any existing in-memory structure content. + */ +HAL_BOOL +ar9300_eeprom_restore(struct ath_hal *ah) +{ + struct ath_hal_9300 *ahp = AH9300(ah); + ar9300_eeprom_t *mptr; + int mdata_size; + HAL_BOOL status = AH_FALSE; + + mptr = &ahp->ah_eeprom; + mdata_size = ar9300_eeprom_struct_size(); + + if (mptr != 0 && mdata_size > 0) { +#if AH_BYTE_ORDER == AH_BIG_ENDIAN + ar9300_eeprom_template_swap(); + ar9300_swap_eeprom(mptr); +#endif + /* + * At this point, mptr points to the eeprom data structure + * in it's "default" state. If this is big endian, swap the + * data structures back to "little endian" form. + */ + if (ar9300_eeprom_restore_internal(ah, mptr, mdata_size) >= 0) { + status = AH_TRUE; + } + +#if AH_BYTE_ORDER == AH_BIG_ENDIAN + /* Second Swap, back to Big Endian */ + ar9300_eeprom_template_swap(); + ar9300_swap_eeprom(mptr); +#endif + + } + ahp->ah_2g_paprd_rate_mask_ht40 = + mptr->modal_header_2g.paprd_rate_mask_ht40; + ahp->ah_2g_paprd_rate_mask_ht20 = + mptr->modal_header_2g.paprd_rate_mask_ht20; + ahp->ah_5g_paprd_rate_mask_ht40 = + mptr->modal_header_5g.paprd_rate_mask_ht40; + ahp->ah_5g_paprd_rate_mask_ht20 = + mptr->modal_header_5g.paprd_rate_mask_ht20; + return status; +} + +int32_t ar9300_thermometer_get(struct ath_hal *ah) +{ + struct ath_hal_9300 *ahp = AH9300(ah); + int thermometer; + thermometer = + (ahp->ah_eeprom.base_eep_header.misc_configuration >> 1) & 0x3; + thermometer--; + return thermometer; +} + +HAL_BOOL ar9300_thermometer_apply(struct ath_hal *ah) +{ + int thermometer = ar9300_thermometer_get(ah); + +/* ch0_RXTX4 */ +/*#define AR_PHY_65NM_CH0_RXTX4 AR_PHY_65NM(ch0_RXTX4)*/ +#define AR_PHY_65NM_CH1_RXTX4 AR_PHY_65NM(ch1_RXTX4) +#define AR_PHY_65NM_CH2_RXTX4 AR_PHY_65NM(ch2_RXTX4) +/*#define AR_PHY_65NM_CH0_RXTX4_THERM_ON 0x10000000*/ +/*#define AR_PHY_65NM_CH0_RXTX4_THERM_ON_S 28*/ +#define AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR_S 29 +#define AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR \ + (0x1<<AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR_S) + + if (thermometer < 0) { + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, 0); + if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah)) { + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, 0); + if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { + OS_REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, + AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, 0); + } + } + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); + if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah)) { + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); + if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH2_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); + } + } + } else { + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, 1); + if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah)) { + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, 1); + if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { + OS_REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, + AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, 1); + } + } + if (thermometer == 0) { + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 1); + if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah)) { + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); + if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { + OS_REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, + AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); + } + } + } else if (thermometer == 1) { + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); + if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah)) { + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 1); + if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { + OS_REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, + AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); + } + } + } else if (thermometer == 2) { + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); + if (!AR_SREV_HORNET(ah) && !AR_SREV_POSEIDON(ah)) { + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_CH0_RXTX4_THERM_ON, 0); + if (!AR_SREV_WASP(ah) && !AR_SREV_JUPITER(ah)) { + OS_REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4, + AR_PHY_65NM_CH0_RXTX4_THERM_ON, 1); + } + } + } + } + return AH_TRUE; +} + +static int32_t ar9300_tuning_caps_params_get(struct ath_hal *ah) +{ + int tuning_caps_params; + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + tuning_caps_params = eep->base_eep_header.params_for_tuning_caps[0]; + return tuning_caps_params; +} + +/* + * Read the tuning caps params from eeprom and set to correct register. + * To regulation the frequency accuracy. + */ +HAL_BOOL ar9300_tuning_caps_apply(struct ath_hal *ah) +{ + int tuning_caps_params; + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + tuning_caps_params = ar9300_tuning_caps_params_get(ah); + if ((eep->base_eep_header.feature_enable & 0x40) >> 6) { + tuning_caps_params &= 0x7f; + + if (AR_SREV_HORNET(ah) || AR_SREV_POSEIDON(ah) || AR_SREV_WASP(ah)) { + return AH_TRUE; + } else if (AR_SREV_SCORPION(ah)) { + OS_REG_RMW_FIELD(ah, + AR_SCORPION_CH0_XTAL, AR_OSPREY_CHO_XTAL_CAPINDAC, + tuning_caps_params); + OS_REG_RMW_FIELD(ah, + AR_SCORPION_CH0_XTAL, AR_OSPREY_CHO_XTAL_CAPOUTDAC, + tuning_caps_params); + } else { + OS_REG_RMW_FIELD(ah, + AR_OSPREY_CH0_XTAL, AR_OSPREY_CHO_XTAL_CAPINDAC, + tuning_caps_params); + OS_REG_RMW_FIELD(ah, + AR_OSPREY_CH0_XTAL, AR_OSPREY_CHO_XTAL_CAPOUTDAC, + tuning_caps_params); + } + + } + return AH_TRUE; +} + +/* + * Read the tx_frame_to_xpa_on param from eeprom and apply the value to + * correct register. + */ +HAL_BOOL ar9300_xpa_timing_control_apply(struct ath_hal *ah, HAL_BOOL is_2ghz) +{ + u_int8_t xpa_timing_control; + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + if ((eep->base_eep_header.feature_enable & 0x80) >> 7) { + if (AR_SREV_OSPREY(ah) || AR_SREV_AR9580(ah) || AR_SREV_WASP(ah)) { + if (is_2ghz) { + xpa_timing_control = eep->modal_header_2g.tx_frame_to_xpa_on; + OS_REG_RMW_FIELD(ah, + AR_PHY_XPA_TIMING_CTL, AR_PHY_XPA_TIMING_CTL_FRAME_XPAB_ON, + xpa_timing_control); + } else { + xpa_timing_control = eep->modal_header_5g.tx_frame_to_xpa_on; + OS_REG_RMW_FIELD(ah, + AR_PHY_XPA_TIMING_CTL, AR_PHY_XPA_TIMING_CTL_FRAME_XPAA_ON, + xpa_timing_control); + } + } + } + return AH_TRUE; +} + + +/* + * Read the xLNA_bias_strength param from eeprom and apply the value to + * correct register. + */ +HAL_BOOL ar9300_x_lNA_bias_strength_apply(struct ath_hal *ah, HAL_BOOL is_2ghz) +{ + u_int8_t x_lNABias; + u_int32_t value = 0; + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + + if ((eep->base_eep_header.misc_configuration & 0x40) >> 6) { + if (AR_SREV_OSPREY(ah)) { + if (is_2ghz) { + x_lNABias = eep->modal_header_2g.xLNA_bias_strength; + } else { + x_lNABias = eep->modal_header_5g.xLNA_bias_strength; + } + value = x_lNABias & ( 0x03 ); // bit0,1 for chain0 + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH0_RXTX4, AR_PHY_65NM_RXTX4_XLNA_BIAS, value); + value = (x_lNABias >> 2) & ( 0x03 ); // bit2,3 for chain1 + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH1_RXTX4, AR_PHY_65NM_RXTX4_XLNA_BIAS, value); + value = (x_lNABias >> 4) & ( 0x03 ); // bit4,5 for chain2 + OS_REG_RMW_FIELD(ah, + AR_PHY_65NM_CH2_RXTX4, AR_PHY_65NM_RXTX4_XLNA_BIAS, value); + } + } + return AH_TRUE; +} + + +/* + * Read EEPROM header info and program the device for correct operation + * given the channel value. + */ +HAL_BOOL +ar9300_eeprom_set_board_values(struct ath_hal *ah, HAL_CHANNEL_INTERNAL *chan) +{ + ar9300_xpa_bias_level_apply(ah, IS_CHAN_2GHZ(chan)); + + ar9300_xpa_timing_control_apply(ah, IS_CHAN_2GHZ(chan)); + + ar9300_ant_ctrl_apply(ah, IS_CHAN_2GHZ(chan)); + ar9300_drive_strength_apply(ah); + + ar9300_x_lNA_bias_strength_apply(ah, IS_CHAN_2GHZ(chan)); + + /* wait for Poseidon internal regular turnning */ + /* for Hornet we move it before initPLL to avoid an access issue */ + /* Function not used when EMULATION. */ + if (!AR_SREV_HORNET(ah) && !AR_SREV_WASP(ah)) { + ar9300_internal_regulator_apply(ah); + } + + ar9300_attenuation_apply(ah, chan->channel); + ar9300_quick_drop_apply(ah, chan->channel); + ar9300_thermometer_apply(ah); + if(!AR_SREV_WASP(ah)) + { + ar9300_tuning_caps_apply(ah); + } + + ar9300_tx_end_to_xpab_off_apply(ah, chan->channel); + + return AH_TRUE; +} + +u_int8_t * +ar9300_eeprom_get_spur_chans_ptr(struct ath_hal *ah, HAL_BOOL is_2ghz) +{ + ar9300_eeprom_t *eep = &AH9300(ah)->ah_eeprom; + + if (is_2ghz) { + return &(eep->modal_header_2g.spur_chans[0]); + } else { + return &(eep->modal_header_5g.spur_chans[0]); + } +} + +static u_int8_t ar9300_eeprom_get_tx_gain_table_number_max(struct ath_hal *ah) +{ + unsigned long tx_gain_table_max; + tx_gain_table_max = OS_REG_READ_FIELD(ah, + AR_PHY_TPC_7, AR_PHY_TPC_7_TX_GAIN_TABLE_MAX); + return tx_gain_table_max; +} + +u_int8_t ar9300_eeprom_tx_gain_table_index_max_apply(struct ath_hal *ah, u_int16_t channel) +{ + unsigned int index; + ar9300_eeprom_t *ahp_Eeprom; + struct ath_hal_9300 *ahp = AH9300(ah); + + ahp_Eeprom = &ahp->ah_eeprom; + + if (ahp_Eeprom->base_ext1.misc_enable == 0) + return AH_FALSE; + + if (channel < 4000) + { + index = ahp_Eeprom->modal_header_2g.tx_gain_cap; + } + else + { + index = ahp_Eeprom->modal_header_5g.tx_gain_cap; + } + + OS_REG_RMW_FIELD(ah, + AR_PHY_TPC_7, AR_PHY_TPC_7_TX_GAIN_TABLE_MAX, index); + return AH_TRUE; +} + +static u_int8_t ar9300_eeprom_get_pcdac_tx_gain_table_i(struct ath_hal *ah, + int i, u_int8_t *pcdac) +{ + unsigned long tx_gain; + u_int8_t tx_gain_table_max; + tx_gain_table_max = ar9300_eeprom_get_tx_gain_table_number_max(ah); + if (i <= 0 || i > tx_gain_table_max) { + *pcdac = 0; + return AH_FALSE; + } + + tx_gain = OS_REG_READ(ah, AR_PHY_TXGAIN_TAB(1) + i * 4); + *pcdac = ((tx_gain >> 24) & 0xff); + return AH_TRUE; +} + +u_int8_t ar9300_eeprom_set_tx_gain_cap(struct ath_hal *ah, + int *tx_gain_max) +// pcdac read back from reg, read back value depends on reset 2GHz/5GHz ini +// tx_gain_table, this function will be called twice after each +// band's calibration. +// after 2GHz cal, tx_gain_max[0] has 2GHz, calibration max txgain, +// tx_gain_max[1]=-100 +// after 5GHz cal, tx_gain_max[0],tx_gain_max[1] have calibration +// value for both band +// reset is on 5GHz, reg reading from tx_gain_table is for 5GHz, +// so program can't recalculate 2g.tx_gain_cap at this point. +{ + int i = 0, ig, im = 0; + u_int8_t pcdac = 0; + u_int8_t tx_gain_table_max; + ar9300_eeprom_t *ahp_Eeprom; + struct ath_hal_9300 *ahp = AH9300(ah); + + ahp_Eeprom = &ahp->ah_eeprom; + + if (ahp_Eeprom->base_ext1.misc_enable == 0) + return AH_FALSE; + + tx_gain_table_max = ar9300_eeprom_get_tx_gain_table_number_max(ah); + + for (i = 0; i < 2; i++) { + if (tx_gain_max[i]>-100) { // -100 didn't cal that band. + if ( i== 0) { + if (tx_gain_max[1]>-100) { + continue; + // both band are calibrated, skip 2GHz 2g.tx_gain_cap reset + } + } + for (ig = 1; ig <= tx_gain_table_max; ig++) { + if (ah != 0 && ah->ah_reset != 0) + { + ar9300_eeprom_get_pcdac_tx_gain_table_i(ah, ig, &pcdac); + if (pcdac >= tx_gain_max[i]) + break; + } + } + if (ig+1 <= tx_gain_table_max) { + if (pcdac == tx_gain_max[i]) + im = ig; + else + im = ig + 1; + if (i == 0) { + ahp_Eeprom->modal_header_2g.tx_gain_cap = im; + } else { + ahp_Eeprom->modal_header_5g.tx_gain_cap = im; + } + } else { + if (i == 0) { + ahp_Eeprom->modal_header_2g.tx_gain_cap = ig; + } else { + ahp_Eeprom->modal_header_5g.tx_gain_cap = ig; + } + } + } + } + return AH_TRUE; +} + +#endif /* AH_SUPPORT_AR9300 */ |