diff options
Diffstat (limited to 'sys/contrib/dev/ath/ath_hal/ar9300/ar9300_beacon.c')
-rw-r--r-- | sys/contrib/dev/ath/ath_hal/ar9300/ar9300_beacon.c | 198 |
1 files changed, 198 insertions, 0 deletions
diff --git a/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_beacon.c b/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_beacon.c new file mode 100644 index 0000000..66ce172 --- /dev/null +++ b/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_beacon.c @@ -0,0 +1,198 @@ +/* + * Copyright (c) 2013 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH + * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, + * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM + * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR + * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. + */ + +#include "opt_ah.h" + +#ifdef AH_SUPPORT_AR9300 + +#include "ah.h" +#include "ah_internal.h" + +#include "ar9300/ar9300.h" +#include "ar9300/ar9300reg.h" + +#define TU_TO_USEC(_tu) ((_tu) << 10) + +extern u_int32_t ar9300_num_tx_pending(struct ath_hal *ah, u_int q); + +/* + * Initializes all of the hardware registers used to + * send beacons. Note that for station operation the + * driver calls ar9300_set_sta_beacon_timers instead. + */ +void +ar9300_beacon_init(struct ath_hal *ah, + u_int32_t next_beacon, u_int32_t beacon_period, HAL_OPMODE opmode) +{ + struct ath_hal_private *ap = AH_PRIVATE(ah); + u_int32_t beacon_period_usec; + + HALASSERT(opmode == HAL_M_IBSS || opmode == HAL_M_HOSTAP); + if (opmode == HAL_M_IBSS) { + OS_REG_SET_BIT(ah, AR_TXCFG, AR_TXCFG_ADHOC_BEACON_ATIM_TX_POLICY); + } + OS_REG_WRITE(ah, AR_NEXT_TBTT_TIMER, ONE_EIGHTH_TU_TO_USEC(next_beacon)); + OS_REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, + (ONE_EIGHTH_TU_TO_USEC(next_beacon) - + ap->ah_config.ath_hal_dma_beacon_response_time)); + OS_REG_WRITE(ah, AR_NEXT_SWBA, + (ONE_EIGHTH_TU_TO_USEC(next_beacon) - + ap->ah_config.ath_hal_sw_beacon_response_time)); + + beacon_period_usec = + ONE_EIGHTH_TU_TO_USEC(beacon_period & HAL_BEACON_PERIOD_TU8); + OS_REG_WRITE(ah, AR_BEACON_PERIOD, beacon_period_usec); + OS_REG_WRITE(ah, AR_DMA_BEACON_PERIOD, beacon_period_usec); + OS_REG_WRITE(ah, AR_SWBA_PERIOD, beacon_period_usec); + + /* reset TSF if required */ + if (beacon_period & HAL_BEACON_RESET_TSF) { + ar9300_reset_tsf(ah); + } + + /* enable timers */ + OS_REG_SET_BIT(ah, AR_TIMER_MODE, + AR_TBTT_TIMER_EN | AR_DBA_TIMER_EN | AR_SWBA_TIMER_EN); +} + +/* + * Set all the beacon related bits on the h/w for stations + * i.e. initializes the corresponding h/w timers; + */ +void +ar9300_set_sta_beacon_timers(struct ath_hal *ah, const HAL_BEACON_STATE *bs) +{ + u_int32_t next_tbtt, beaconintval, dtimperiod, beacontimeout; + HAL_CAPABILITIES *p_cap = &AH_PRIVATE(ah)->ah_caps; + + HALASSERT(bs->bs_intval != 0); + + /* no cfp setting since h/w automatically takes care */ + OS_REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(bs->bs_nexttbtt)); + + /* + * Start the beacon timers by setting the BEACON register + * to the beacon interval; no need to write tim offset since + * h/w parses IEs. + */ + OS_REG_WRITE(ah, AR_BEACON_PERIOD, + TU_TO_USEC(bs->bs_intval & HAL_BEACON_PERIOD)); + OS_REG_WRITE(ah, AR_DMA_BEACON_PERIOD, + TU_TO_USEC(bs->bs_intval & HAL_BEACON_PERIOD)); + /* + * Configure the BMISS interrupt. Note that we + * assume the caller blocks interrupts while enabling + * the threshold. + */ + HALASSERT(bs->bs_bmissthreshold <= + (AR_RSSI_THR_BM_THR >> AR_RSSI_THR_BM_THR_S)); + OS_REG_RMW_FIELD(ah, AR_RSSI_THR, + AR_RSSI_THR_BM_THR, bs->bs_bmissthreshold); + + /* + * Program the sleep registers to correlate with the beacon setup. + */ + + /* + * Current implementation assumes sw processing of beacons - + * assuming an interrupt is generated every beacon which + * causes the hardware to become awake until the sw tells + * it to go to sleep again; beacon timeout is to allow for + * beacon jitter; cab timeout is max time to wait for cab + * after seeing the last DTIM or MORE CAB bit + */ +#define CAB_TIMEOUT_VAL 10 /* in TU */ +#define BEACON_TIMEOUT_VAL 10 /* in TU */ +#define MIN_BEACON_TIMEOUT_VAL 1 /* in 1/8 TU */ +#define SLEEP_SLOP 3 /* in TU */ + + /* + * For max powersave mode we may want to sleep for longer than a + * beacon period and not want to receive all beacons; modify the + * timers accordingly; make sure to align the next TIM to the + * next DTIM if we decide to wake for DTIMs only + */ + beaconintval = bs->bs_intval & HAL_BEACON_PERIOD; + HALASSERT(beaconintval != 0); + if (bs->bs_sleepduration > beaconintval) { + HALASSERT(roundup(bs->bs_sleepduration, beaconintval) == + bs->bs_sleepduration); + beaconintval = bs->bs_sleepduration; + } + dtimperiod = bs->bs_dtimperiod; + if (bs->bs_sleepduration > dtimperiod) { + HALASSERT(dtimperiod == 0 || + roundup(bs->bs_sleepduration, dtimperiod) == + bs->bs_sleepduration); + dtimperiod = bs->bs_sleepduration; + } + HALASSERT(beaconintval <= dtimperiod); + if (beaconintval == dtimperiod) { + next_tbtt = bs->bs_nextdtim; + } else { + next_tbtt = bs->bs_nexttbtt; + } + + HALDEBUG(ah, HAL_DEBUG_BEACON, + "%s: next DTIM %d\n", __func__, bs->bs_nextdtim); + HALDEBUG(ah, HAL_DEBUG_BEACON, + "%s: next beacon %d\n", __func__, next_tbtt); + HALDEBUG(ah, HAL_DEBUG_BEACON, + "%s: beacon period %d\n", __func__, beaconintval); + HALDEBUG(ah, HAL_DEBUG_BEACON, + "%s: DTIM period %d\n", __func__, dtimperiod); + + OS_REG_WRITE(ah, AR_NEXT_DTIM, TU_TO_USEC(bs->bs_nextdtim - SLEEP_SLOP)); + OS_REG_WRITE(ah, AR_NEXT_TIM, TU_TO_USEC(next_tbtt - SLEEP_SLOP)); + + /* cab timeout is now in 1/8 TU */ + OS_REG_WRITE(ah, AR_SLEEP1, + SM((CAB_TIMEOUT_VAL << 3), AR_SLEEP1_CAB_TIMEOUT) + | AR_SLEEP1_ASSUME_DTIM); + + /* beacon timeout is now in 1/8 TU */ + if (p_cap->hal_auto_sleep_support) { + beacontimeout = (BEACON_TIMEOUT_VAL << 3); + } else { + /* + * Use a very small value to make sure the timeout occurs before + * the TBTT. In this case the chip will not go back to sleep + * automatically, instead it will wait for the SW to explicitly + * set it to that mode. + */ + beacontimeout = MIN_BEACON_TIMEOUT_VAL; + } + + OS_REG_WRITE(ah, AR_SLEEP2, + SM(beacontimeout, AR_SLEEP2_BEACON_TIMEOUT)); + + OS_REG_WRITE(ah, AR_TIM_PERIOD, TU_TO_USEC(beaconintval)); + OS_REG_WRITE(ah, AR_DTIM_PERIOD, TU_TO_USEC(dtimperiod)); + + /* clear HOST AP related timers first */ + OS_REG_CLR_BIT(ah, AR_TIMER_MODE, (AR_DBA_TIMER_EN | AR_SWBA_TIMER_EN)); + + OS_REG_SET_BIT(ah, AR_TIMER_MODE, AR_TBTT_TIMER_EN | AR_TIM_TIMER_EN + | AR_DTIM_TIMER_EN); + + /* TSF out of range threshold */ + OS_REG_WRITE(ah, AR_TSFOOR_THRESHOLD, bs->bs_tsfoor_threshold); + +#undef CAB_TIMEOUT_VAL +#undef BEACON_TIMEOUT_VAL +#undef SLEEP_SLOP +} +#endif /* AH_SUPPORT_AR9300 */ |