diff options
Diffstat (limited to 'sys/contrib/dev/acpica/os_specific/service_layers/osunixxf.c')
| -rw-r--r-- | sys/contrib/dev/acpica/os_specific/service_layers/osunixxf.c | 1357 |
1 files changed, 1357 insertions, 0 deletions
diff --git a/sys/contrib/dev/acpica/os_specific/service_layers/osunixxf.c b/sys/contrib/dev/acpica/os_specific/service_layers/osunixxf.c new file mode 100644 index 0000000..19637a0 --- /dev/null +++ b/sys/contrib/dev/acpica/os_specific/service_layers/osunixxf.c @@ -0,0 +1,1357 @@ +/****************************************************************************** + * + * Module Name: osunixxf - UNIX OSL interfaces + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2013, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + + +/* + * These interfaces are required in order to compile the ASL compiler and the + * various ACPICA tools under Linux or other Unix-like system. + */ +#include <contrib/dev/acpica/include/acpi.h> +#include <contrib/dev/acpica/include/accommon.h> +#include <contrib/dev/acpica/include/amlcode.h> +#include <contrib/dev/acpica/include/acparser.h> +#include <contrib/dev/acpica/include/acdebug.h> + +#include <stdio.h> +#include <stdlib.h> +#include <stdarg.h> +#include <unistd.h> +#include <sys/time.h> +#include <semaphore.h> +#include <pthread.h> +#include <errno.h> + +#define _COMPONENT ACPI_OS_SERVICES + ACPI_MODULE_NAME ("osunixxf") + + +extern FILE *AcpiGbl_DebugFile; +FILE *AcpiGbl_OutputFile; + + +/* Upcalls to AcpiExec */ + +ACPI_PHYSICAL_ADDRESS +AeLocalGetRootPointer ( + void); + +void +AeTableOverride ( + ACPI_TABLE_HEADER *ExistingTable, + ACPI_TABLE_HEADER **NewTable); + +typedef void* (*PTHREAD_CALLBACK) (void *); + +/* Buffer used by AcpiOsVprintf */ + +#define ACPI_VPRINTF_BUFFER_SIZE 512 + + +/****************************************************************************** + * + * FUNCTION: AcpiOsInitialize, AcpiOsTerminate + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Init and terminate. Nothing to do. + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsInitialize ( + void) +{ + + AcpiGbl_OutputFile = stdout; + return (AE_OK); +} + + +ACPI_STATUS +AcpiOsTerminate ( + void) +{ + + return (AE_OK); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsGetRootPointer + * + * PARAMETERS: None + * + * RETURN: RSDP physical address + * + * DESCRIPTION: Gets the ACPI root pointer (RSDP) + * + *****************************************************************************/ + +ACPI_PHYSICAL_ADDRESS +AcpiOsGetRootPointer ( + void) +{ + + return (AeLocalGetRootPointer ()); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsPredefinedOverride + * + * PARAMETERS: InitVal - Initial value of the predefined object + * NewVal - The new value for the object + * + * RETURN: Status, pointer to value. Null pointer returned if not + * overriding. + * + * DESCRIPTION: Allow the OS to override predefined names + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsPredefinedOverride ( + const ACPI_PREDEFINED_NAMES *InitVal, + ACPI_STRING *NewVal) +{ + + if (!InitVal || !NewVal) + { + return (AE_BAD_PARAMETER); + } + + *NewVal = NULL; + return (AE_OK); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsTableOverride + * + * PARAMETERS: ExistingTable - Header of current table (probably + * firmware) + * NewTable - Where an entire new table is returned. + * + * RETURN: Status, pointer to new table. Null pointer returned if no + * table is available to override + * + * DESCRIPTION: Return a different version of a table if one is available + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsTableOverride ( + ACPI_TABLE_HEADER *ExistingTable, + ACPI_TABLE_HEADER **NewTable) +{ + + if (!ExistingTable || !NewTable) + { + return (AE_BAD_PARAMETER); + } + + *NewTable = NULL; + +#ifdef ACPI_EXEC_APP + + AeTableOverride (ExistingTable, NewTable); + return (AE_OK); +#else + + return (AE_NO_ACPI_TABLES); +#endif +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsPhysicalTableOverride + * + * PARAMETERS: ExistingTable - Header of current table (probably firmware) + * NewAddress - Where new table address is returned + * (Physical address) + * NewTableLength - Where new table length is returned + * + * RETURN: Status, address/length of new table. Null pointer returned + * if no table is available to override. + * + * DESCRIPTION: Returns AE_SUPPORT, function not used in user space. + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsPhysicalTableOverride ( + ACPI_TABLE_HEADER *ExistingTable, + ACPI_PHYSICAL_ADDRESS *NewAddress, + UINT32 *NewTableLength) +{ + + return (AE_SUPPORT); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsRedirectOutput + * + * PARAMETERS: Destination - An open file handle/pointer + * + * RETURN: None + * + * DESCRIPTION: Causes redirect of AcpiOsPrintf and AcpiOsVprintf + * + *****************************************************************************/ + +void +AcpiOsRedirectOutput ( + void *Destination) +{ + + AcpiGbl_OutputFile = Destination; +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsPrintf + * + * PARAMETERS: fmt, ... - Standard printf format + * + * RETURN: None + * + * DESCRIPTION: Formatted output. Note: very similar to AcpiOsVprintf + * (performance), changes should be tracked in both functions. + * + *****************************************************************************/ + +void ACPI_INTERNAL_VAR_XFACE +AcpiOsPrintf ( + const char *Fmt, + ...) +{ + va_list Args; + UINT8 Flags; + + + Flags = AcpiGbl_DbOutputFlags; + if (Flags & ACPI_DB_REDIRECTABLE_OUTPUT) + { + /* Output is directable to either a file (if open) or the console */ + + if (AcpiGbl_DebugFile) + { + /* Output file is open, send the output there */ + + va_start (Args, Fmt); + vfprintf (AcpiGbl_DebugFile, Fmt, Args); + va_end (Args); + } + else + { + /* No redirection, send output to console (once only!) */ + + Flags |= ACPI_DB_CONSOLE_OUTPUT; + } + } + + if (Flags & ACPI_DB_CONSOLE_OUTPUT) + { + va_start (Args, Fmt); + vfprintf (AcpiGbl_OutputFile, Fmt, Args); + va_end (Args); + } +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsVprintf + * + * PARAMETERS: fmt - Standard printf format + * args - Argument list + * + * RETURN: None + * + * DESCRIPTION: Formatted output with argument list pointer. Note: very + * similar to AcpiOsPrintf, changes should be tracked in both + * functions. + * + *****************************************************************************/ + +void +AcpiOsVprintf ( + const char *Fmt, + va_list Args) +{ + UINT8 Flags; + char Buffer[ACPI_VPRINTF_BUFFER_SIZE]; + + + /* + * We build the output string in a local buffer because we may be + * outputting the buffer twice. Using vfprintf is problematic because + * some implementations modify the args pointer/structure during + * execution. Thus, we use the local buffer for portability. + * + * Note: Since this module is intended for use by the various ACPICA + * utilities/applications, we can safely declare the buffer on the stack. + * Also, This function is used for relatively small error messages only. + */ + vsnprintf (Buffer, ACPI_VPRINTF_BUFFER_SIZE, Fmt, Args); + + Flags = AcpiGbl_DbOutputFlags; + if (Flags & ACPI_DB_REDIRECTABLE_OUTPUT) + { + /* Output is directable to either a file (if open) or the console */ + + if (AcpiGbl_DebugFile) + { + /* Output file is open, send the output there */ + + fputs (Buffer, AcpiGbl_DebugFile); + } + else + { + /* No redirection, send output to console (once only!) */ + + Flags |= ACPI_DB_CONSOLE_OUTPUT; + } + } + + if (Flags & ACPI_DB_CONSOLE_OUTPUT) + { + fputs (Buffer, AcpiGbl_OutputFile); + } +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsGetLine + * + * PARAMETERS: Buffer - Where to return the command line + * BufferLength - Maximum length of Buffer + * BytesRead - Where the actual byte count is returned + * + * RETURN: Status and actual bytes read + * + * DESCRIPTION: Formatted input with argument list pointer + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsGetLine ( + char *Buffer, + UINT32 BufferLength, + UINT32 *BytesRead) +{ + int Temp; + UINT32 i; + + + for (i = 0; ; i++) + { + if (i >= BufferLength) + { + return (AE_BUFFER_OVERFLOW); + } + + if ((Temp = getchar ()) == EOF) + { + return (AE_ERROR); + } + + if (!Temp || Temp == '\n') + { + break; + } + + Buffer [i] = (char) Temp; + } + + /* Null terminate the buffer */ + + Buffer [i] = 0; + + /* Return the number of bytes in the string */ + + if (BytesRead) + { + *BytesRead = i; + } + return (AE_OK); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsMapMemory + * + * PARAMETERS: where - Physical address of memory to be mapped + * length - How much memory to map + * + * RETURN: Pointer to mapped memory. Null on error. + * + * DESCRIPTION: Map physical memory into caller's address space + * + *****************************************************************************/ + +void * +AcpiOsMapMemory ( + ACPI_PHYSICAL_ADDRESS where, + ACPI_SIZE length) +{ + + return (ACPI_TO_POINTER ((ACPI_SIZE) where)); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsUnmapMemory + * + * PARAMETERS: where - Logical address of memory to be unmapped + * length - How much memory to unmap + * + * RETURN: None. + * + * DESCRIPTION: Delete a previously created mapping. Where and Length must + * correspond to a previous mapping exactly. + * + *****************************************************************************/ + +void +AcpiOsUnmapMemory ( + void *where, + ACPI_SIZE length) +{ + + return; +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsAllocate + * + * PARAMETERS: Size - Amount to allocate, in bytes + * + * RETURN: Pointer to the new allocation. Null on error. + * + * DESCRIPTION: Allocate memory. Algorithm is dependent on the OS. + * + *****************************************************************************/ + +void * +AcpiOsAllocate ( + ACPI_SIZE size) +{ + void *Mem; + + + Mem = (void *) malloc ((size_t) size); + return (Mem); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsFree + * + * PARAMETERS: mem - Pointer to previously allocated memory + * + * RETURN: None. + * + * DESCRIPTION: Free memory allocated via AcpiOsAllocate + * + *****************************************************************************/ + +void +AcpiOsFree ( + void *mem) +{ + + free (mem); +} + + +#ifdef ACPI_SINGLE_THREADED +/****************************************************************************** + * + * FUNCTION: Semaphore stub functions + * + * DESCRIPTION: Stub functions used for single-thread applications that do + * not require semaphore synchronization. Full implementations + * of these functions appear after the stubs. + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsCreateSemaphore ( + UINT32 MaxUnits, + UINT32 InitialUnits, + ACPI_HANDLE *OutHandle) +{ + *OutHandle = (ACPI_HANDLE) 1; + return (AE_OK); +} + +ACPI_STATUS +AcpiOsDeleteSemaphore ( + ACPI_HANDLE Handle) +{ + return (AE_OK); +} + +ACPI_STATUS +AcpiOsWaitSemaphore ( + ACPI_HANDLE Handle, + UINT32 Units, + UINT16 Timeout) +{ + return (AE_OK); +} + +ACPI_STATUS +AcpiOsSignalSemaphore ( + ACPI_HANDLE Handle, + UINT32 Units) +{ + return (AE_OK); +} + +#else +/****************************************************************************** + * + * FUNCTION: AcpiOsCreateSemaphore + * + * PARAMETERS: InitialUnits - Units to be assigned to the new semaphore + * OutHandle - Where a handle will be returned + * + * RETURN: Status + * + * DESCRIPTION: Create an OS semaphore + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsCreateSemaphore ( + UINT32 MaxUnits, + UINT32 InitialUnits, + ACPI_HANDLE *OutHandle) +{ + sem_t *Sem; + + + if (!OutHandle) + { + return (AE_BAD_PARAMETER); + } + +#ifdef __APPLE__ + { + char *SemaphoreName = tmpnam (NULL); + + Sem = sem_open (SemaphoreName, O_EXCL|O_CREAT, 0755, InitialUnits); + if (!Sem) + { + return (AE_NO_MEMORY); + } + sem_unlink (SemaphoreName); /* This just deletes the name */ + } + +#else + Sem = AcpiOsAllocate (sizeof (sem_t)); + if (!Sem) + { + return (AE_NO_MEMORY); + } + + if (sem_init (Sem, 0, InitialUnits) == -1) + { + AcpiOsFree (Sem); + return (AE_BAD_PARAMETER); + } +#endif + + *OutHandle = (ACPI_HANDLE) Sem; + return (AE_OK); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsDeleteSemaphore + * + * PARAMETERS: Handle - Handle returned by AcpiOsCreateSemaphore + * + * RETURN: Status + * + * DESCRIPTION: Delete an OS semaphore + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsDeleteSemaphore ( + ACPI_HANDLE Handle) +{ + sem_t *Sem = (sem_t *) Handle; + + + if (!Sem) + { + return (AE_BAD_PARAMETER); + } + + if (sem_destroy (Sem) == -1) + { + return (AE_BAD_PARAMETER); + } + + return (AE_OK); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsWaitSemaphore + * + * PARAMETERS: Handle - Handle returned by AcpiOsCreateSemaphore + * Units - How many units to wait for + * MsecTimeout - How long to wait (milliseconds) + * + * RETURN: Status + * + * DESCRIPTION: Wait for units + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsWaitSemaphore ( + ACPI_HANDLE Handle, + UINT32 Units, + UINT16 MsecTimeout) +{ + ACPI_STATUS Status = AE_OK; + sem_t *Sem = (sem_t *) Handle; +#ifndef ACPI_USE_ALTERNATE_TIMEOUT + struct timespec Time; + int RetVal; +#endif + + + if (!Sem) + { + return (AE_BAD_PARAMETER); + } + + switch (MsecTimeout) + { + /* + * No Wait: + * -------- + * A zero timeout value indicates that we shouldn't wait - just + * acquire the semaphore if available otherwise return AE_TIME + * (a.k.a. 'would block'). + */ + case 0: + + if (sem_trywait(Sem) == -1) + { + Status = (AE_TIME); + } + break; + + /* Wait Indefinitely */ + + case ACPI_WAIT_FOREVER: + + if (sem_wait (Sem)) + { + Status = (AE_TIME); + } + break; + + /* Wait with MsecTimeout */ + + default: + +#ifdef ACPI_USE_ALTERNATE_TIMEOUT + /* + * Alternate timeout mechanism for environments where + * sem_timedwait is not available or does not work properly. + */ + while (MsecTimeout) + { + if (sem_trywait (Sem) == 0) + { + /* Got the semaphore */ + return (AE_OK); + } + + if (MsecTimeout >= 10) + { + MsecTimeout -= 10; + usleep (10 * ACPI_USEC_PER_MSEC); /* ten milliseconds */ + } + else + { + MsecTimeout--; + usleep (ACPI_USEC_PER_MSEC); /* one millisecond */ + } + } + Status = (AE_TIME); +#else + /* + * The interface to sem_timedwait is an absolute time, so we need to + * get the current time, then add in the millisecond Timeout value. + */ + if (clock_gettime (CLOCK_REALTIME, &Time) == -1) + { + perror ("clock_gettime"); + return (AE_TIME); + } + + Time.tv_sec += (MsecTimeout / ACPI_MSEC_PER_SEC); + Time.tv_nsec += ((MsecTimeout % ACPI_MSEC_PER_SEC) * ACPI_NSEC_PER_MSEC); + + /* Handle nanosecond overflow (field must be less than one second) */ + + if (Time.tv_nsec >= ACPI_NSEC_PER_SEC) + { + Time.tv_sec += (Time.tv_nsec / ACPI_NSEC_PER_SEC); + Time.tv_nsec = (Time.tv_nsec % ACPI_NSEC_PER_SEC); + } + + while (((RetVal = sem_timedwait (Sem, &Time)) == -1) && (errno == EINTR)) + { + continue; + } + + if (RetVal != 0) + { + if (errno != ETIMEDOUT) + { + perror ("sem_timedwait"); + } + Status = (AE_TIME); + } +#endif + break; + } + + return (Status); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsSignalSemaphore + * + * PARAMETERS: Handle - Handle returned by AcpiOsCreateSemaphore + * Units - Number of units to send + * + * RETURN: Status + * + * DESCRIPTION: Send units + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsSignalSemaphore ( + ACPI_HANDLE Handle, + UINT32 Units) +{ + sem_t *Sem = (sem_t *)Handle; + + + if (!Sem) + { + return (AE_BAD_PARAMETER); + } + + if (sem_post (Sem) == -1) + { + return (AE_LIMIT); + } + + return (AE_OK); +} + +#endif /* ACPI_SINGLE_THREADED */ + + +/****************************************************************************** + * + * FUNCTION: Spinlock interfaces + * + * DESCRIPTION: Map these interfaces to semaphore interfaces + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsCreateLock ( + ACPI_SPINLOCK *OutHandle) +{ + + return (AcpiOsCreateSemaphore (1, 1, OutHandle)); +} + + +void +AcpiOsDeleteLock ( + ACPI_SPINLOCK Handle) +{ + AcpiOsDeleteSemaphore (Handle); +} + + +ACPI_CPU_FLAGS +AcpiOsAcquireLock ( + ACPI_HANDLE Handle) +{ + AcpiOsWaitSemaphore (Handle, 1, 0xFFFF); + return (0); +} + + +void +AcpiOsReleaseLock ( + ACPI_SPINLOCK Handle, + ACPI_CPU_FLAGS Flags) +{ + AcpiOsSignalSemaphore (Handle, 1); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsInstallInterruptHandler + * + * PARAMETERS: InterruptNumber - Level handler should respond to. + * Isr - Address of the ACPI interrupt handler + * ExceptPtr - Where status is returned + * + * RETURN: Handle to the newly installed handler. + * + * DESCRIPTION: Install an interrupt handler. Used to install the ACPI + * OS-independent handler. + * + *****************************************************************************/ + +UINT32 +AcpiOsInstallInterruptHandler ( + UINT32 InterruptNumber, + ACPI_OSD_HANDLER ServiceRoutine, + void *Context) +{ + + return (AE_OK); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsRemoveInterruptHandler + * + * PARAMETERS: Handle - Returned when handler was installed + * + * RETURN: Status + * + * DESCRIPTION: Uninstalls an interrupt handler. + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsRemoveInterruptHandler ( + UINT32 InterruptNumber, + ACPI_OSD_HANDLER ServiceRoutine) +{ + + return (AE_OK); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsStall + * + * PARAMETERS: microseconds - Time to sleep + * + * RETURN: Blocks until sleep is completed. + * + * DESCRIPTION: Sleep at microsecond granularity + * + *****************************************************************************/ + +void +AcpiOsStall ( + UINT32 microseconds) +{ + + if (microseconds) + { + usleep (microseconds); + } +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsSleep + * + * PARAMETERS: milliseconds - Time to sleep + * + * RETURN: Blocks until sleep is completed. + * + * DESCRIPTION: Sleep at millisecond granularity + * + *****************************************************************************/ + +void +AcpiOsSleep ( + UINT64 milliseconds) +{ + + /* Sleep for whole seconds */ + + sleep (milliseconds / ACPI_MSEC_PER_SEC); + + /* + * Sleep for remaining microseconds. + * Arg to usleep() is in usecs and must be less than 1,000,000 (1 second). + */ + usleep ((milliseconds % ACPI_MSEC_PER_SEC) * ACPI_USEC_PER_MSEC); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsGetTimer + * + * PARAMETERS: None + * + * RETURN: Current time in 100 nanosecond units + * + * DESCRIPTION: Get the current system time + * + *****************************************************************************/ + +UINT64 +AcpiOsGetTimer ( + void) +{ + struct timeval time; + + + /* This timer has sufficient resolution for user-space application code */ + + gettimeofday (&time, NULL); + + /* (Seconds * 10^7 = 100ns(10^-7)) + (Microseconds(10^-6) * 10^1 = 100ns) */ + + return (((UINT64) time.tv_sec * ACPI_100NSEC_PER_SEC) + + ((UINT64) time.tv_usec * ACPI_100NSEC_PER_USEC)); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsReadPciConfiguration + * + * PARAMETERS: PciId - Seg/Bus/Dev + * Register - Device Register + * Value - Buffer where value is placed + * Width - Number of bits + * + * RETURN: Status + * + * DESCRIPTION: Read data from PCI configuration space + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsReadPciConfiguration ( + ACPI_PCI_ID *PciId, + UINT32 Register, + UINT64 *Value, + UINT32 Width) +{ + + return (AE_OK); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsWritePciConfiguration + * + * PARAMETERS: PciId - Seg/Bus/Dev + * Register - Device Register + * Value - Value to be written + * Width - Number of bits + * + * RETURN: Status. + * + * DESCRIPTION: Write data to PCI configuration space + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsWritePciConfiguration ( + ACPI_PCI_ID *PciId, + UINT32 Register, + UINT64 Value, + UINT32 Width) +{ + + return (AE_OK); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsReadPort + * + * PARAMETERS: Address - Address of I/O port/register to read + * Value - Where value is placed + * Width - Number of bits + * + * RETURN: Value read from port + * + * DESCRIPTION: Read data from an I/O port or register + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsReadPort ( + ACPI_IO_ADDRESS Address, + UINT32 *Value, + UINT32 Width) +{ + + switch (Width) + { + case 8: + + *Value = 0xFF; + break; + + case 16: + + *Value = 0xFFFF; + break; + + case 32: + + *Value = 0xFFFFFFFF; + break; + + default: + + return (AE_BAD_PARAMETER); + } + + return (AE_OK); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsWritePort + * + * PARAMETERS: Address - Address of I/O port/register to write + * Value - Value to write + * Width - Number of bits + * + * RETURN: None + * + * DESCRIPTION: Write data to an I/O port or register + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsWritePort ( + ACPI_IO_ADDRESS Address, + UINT32 Value, + UINT32 Width) +{ + + return (AE_OK); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsReadMemory + * + * PARAMETERS: Address - Physical Memory Address to read + * Value - Where value is placed + * Width - Number of bits (8,16,32, or 64) + * + * RETURN: Value read from physical memory address. Always returned + * as a 64-bit integer, regardless of the read width. + * + * DESCRIPTION: Read data from a physical memory address + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsReadMemory ( + ACPI_PHYSICAL_ADDRESS Address, + UINT64 *Value, + UINT32 Width) +{ + + switch (Width) + { + case 8: + case 16: + case 32: + case 64: + + *Value = 0; + break; + + default: + + return (AE_BAD_PARAMETER); + } + return (AE_OK); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsWriteMemory + * + * PARAMETERS: Address - Physical Memory Address to write + * Value - Value to write + * Width - Number of bits (8,16,32, or 64) + * + * RETURN: None + * + * DESCRIPTION: Write data to a physical memory address + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsWriteMemory ( + ACPI_PHYSICAL_ADDRESS Address, + UINT64 Value, + UINT32 Width) +{ + + return (AE_OK); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsReadable + * + * PARAMETERS: Pointer - Area to be verified + * Length - Size of area + * + * RETURN: TRUE if readable for entire length + * + * DESCRIPTION: Verify that a pointer is valid for reading + * + *****************************************************************************/ + +BOOLEAN +AcpiOsReadable ( + void *Pointer, + ACPI_SIZE Length) +{ + + return (TRUE); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsWritable + * + * PARAMETERS: Pointer - Area to be verified + * Length - Size of area + * + * RETURN: TRUE if writable for entire length + * + * DESCRIPTION: Verify that a pointer is valid for writing + * + *****************************************************************************/ + +BOOLEAN +AcpiOsWritable ( + void *Pointer, + ACPI_SIZE Length) +{ + + return (TRUE); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsSignal + * + * PARAMETERS: Function - ACPI CA signal function code + * Info - Pointer to function-dependent structure + * + * RETURN: Status + * + * DESCRIPTION: Miscellaneous functions. Example implementation only. + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsSignal ( + UINT32 Function, + void *Info) +{ + + switch (Function) + { + case ACPI_SIGNAL_FATAL: + + break; + + case ACPI_SIGNAL_BREAKPOINT: + + break; + + default: + + break; + } + + return (AE_OK); +} + +/* Optional multi-thread support */ + +#ifndef ACPI_SINGLE_THREADED +/****************************************************************************** + * + * FUNCTION: AcpiOsGetThreadId + * + * PARAMETERS: None + * + * RETURN: Id of the running thread + * + * DESCRIPTION: Get the ID of the current (running) thread + * + *****************************************************************************/ + +ACPI_THREAD_ID +AcpiOsGetThreadId ( + void) +{ + pthread_t thread; + + + thread = pthread_self(); + return (ACPI_CAST_PTHREAD_T (thread)); +} + + +/****************************************************************************** + * + * FUNCTION: AcpiOsExecute + * + * PARAMETERS: Type - Type of execution + * Function - Address of the function to execute + * Context - Passed as a parameter to the function + * + * RETURN: Status. + * + * DESCRIPTION: Execute a new thread + * + *****************************************************************************/ + +ACPI_STATUS +AcpiOsExecute ( + ACPI_EXECUTE_TYPE Type, + ACPI_OSD_EXEC_CALLBACK Function, + void *Context) +{ + pthread_t thread; + int ret; + + + ret = pthread_create (&thread, NULL, (PTHREAD_CALLBACK) Function, Context); + if (ret) + { + AcpiOsPrintf("Create thread failed"); + } + return (0); +} + +#endif /* ACPI_SINGLE_THREADED */ + + +/****************************************************************************** + * + * FUNCTION: AcpiOsWaitEventsComplete + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Wait for all asynchronous events to complete. This + * implementation does nothing. + * + *****************************************************************************/ + +void +AcpiOsWaitEventsComplete ( + void) +{ + return; +} |
